X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Fperf%2Fl2%2F10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot;h=780c82d273dfc1bdcffe34f3efcf5a8409212c24;hp=505f0798a400a55dd01b4fca0f1457ee737e20be;hb=8c609a6fc0eaf3c8d5b424ed314158251f06479f;hpb=1577123a3c27541181097cb4186aa8855f20b1cc

diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
index 505f0798a4..780c82d273 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -13,26 +13,28 @@
 
 *** Settings ***
 | Resource | resources/libraries/robot/shared/default.robot
-| ...
+|
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | BASE | DOT1Q | L2BDMACLRN
-| ...
-| Suite Setup | Setup suite single link | performance
+| ... | NIC_Intel-X710 | BASE | DOT1Q | L2BDMACLRN | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | dot1q-l2bdbasemaclrn
+|
+| Suite Setup | Setup suite topology interfaces | performance
 | Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test
+| Test Setup | Setup test | performance
 | Test Teardown | Tear down test | performance
-| ...
+|
 | Test Template | Local Template
-| ...
+|
 | Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases*
-| ...
+|
 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
 | ... | with single links between nodes.
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\
 | ... | 802.1Q tagging is applied on link between DUT1 and DUT2.
 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge\
-| ... | domain and MAC learning enabled. DUT1 and DUT2 are tested
-| ... | with ${nic_name}.\
+| ... | domain and MAC learning enabled. DUT1 and DUT2 are tested\
+| ... | with ${nic_name}.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
@@ -47,9 +49,15 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ${crypto_type}= | ${None}
 | ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L2
 | ${overhead}= | ${4}
 | ${subid}= | 10
 | ${tag_rewrite}= | pop-1
@@ -57,7 +65,7 @@
 | ${bd_id1}= | 1
 | ${bd_id2}= | 2
 # Traffic profile:
-| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src254
 
 *** Keywords ***
 | Local Template
@@ -65,70 +73,72 @@
 | | ... | [Cfg] Each DUT runs L2BD config with VLAN and uses ${phy_cores}\
 | | ... | physical core(s) for worker threads.
 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
 | | ... | Type: integer, string
 | | ... | - phy_cores - Number of physical cores. Type: integer
 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
+| |
 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
+| |
 | | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize L2 bridge domains with VLAN dot1q sub-interfaces in circular topology
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize L2 bridge domains with VLAN dot1q sub-interfaces in circular topology
 | | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| tc01-64B-1c-dot1q-l2bdbasemaclrn-ndrpdr
+| 64B-1c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | 64B | 1C
 | | frame_size=${64} | phy_cores=${1}
 
-| tc02-64B-2c-dot1q-l2bdbasemaclrn-ndrpdr
+| 64B-2c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | 64B | 2C
 | | frame_size=${64} | phy_cores=${2}
 
-| tc03-64B-4c-dot1q-l2bdbasemaclrn-ndrpdr
+| 64B-4c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | 64B | 4C
 | | frame_size=${64} | phy_cores=${4}
 
-| tc04-1518B-1c-dot1q-l2bdbasemaclrn-ndrpdr
+| 1518B-1c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | 1518B | 1C
 | | frame_size=${1518} | phy_cores=${1}
 
-| tc05-1518B-2c-dot1q-l2bdbasemaclrn-ndrpdr
+| 1518B-2c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | 1518B | 2C
 | | frame_size=${1518} | phy_cores=${2}
 
-| tc06-1518B-4c-dot1q-l2bdbasemaclrn-ndrpdr
+| 1518B-4c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | 1518B | 4C
 | | frame_size=${1518} | phy_cores=${4}
 
-| tc07-9000B-1c-dot1q-l2bdbasemaclrn-ndrpdr
+| 9000B-1c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | 9000B | 1C
 | | frame_size=${9000} | phy_cores=${1}
 
-| tc08-9000B-2c-dot1q-l2bdbasemaclrn-ndrpdr
+| 9000B-2c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | 9000B | 2C
 | | frame_size=${9000} | phy_cores=${2}
 
-| tc09-9000B-4c-dot1q-l2bdbasemaclrn-ndrpdr
+| 9000B-4c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | 9000B | 4C
 | | frame_size=${9000} | phy_cores=${4}
 
-| tc10-IMIX-1c-dot1q-l2bdbasemaclrn-ndrpdr
+| IMIX-1c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | IMIX | 1C
 | | frame_size=IMIX_v4_1 | phy_cores=${1}
 
-| tc11-IMIX-2c-dot1q-l2bdbasemaclrn-ndrpdr
+| IMIX-2c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | IMIX | 2C
 | | frame_size=IMIX_v4_1 | phy_cores=${2}
 
-| tc12-IMIX-4c-dot1q-l2bdbasemaclrn-ndrpdr
+| IMIX-4c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | IMIX | 4C
 | | frame_size=IMIX_v4_1 | phy_cores=${4}