X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Fperf%2Fl2%2F2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot;h=1b00e06d0e0840887e889f1cfe4806c0abc737b6;hp=279ec58cfa9588bc204b3e2d59eaa61832e722fd;hb=HEAD;hpb=e916ab4db7dec2cc0bb21dcc31460f819d68b0d5

diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
index 279ec58cfa..d98a1679f1 100644
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2023 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -16,54 +16,64 @@
 |
 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
 | ... | NIC_Intel-X710 | BASE | DOT1Q | L2BDMACLRN | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
 | ... | dot1q-l2bdbasemaclrn
 |
-| Suite Setup | Setup suite single link | performance
+| Suite Setup | Setup suite topology interfaces | performance
 | Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test
+| Test Setup | Setup test | performance
 | Test Teardown | Tear down test | performance
 |
 | Test Template | Local Template
 |
-| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4 for L2 switching of IPv4.\
-| ... | IEEE 802.1Q tagging is applied on both links TG-DUT1 .
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with:\
-| ... | 2 VLAN subinterfaces (VID 100 and 200),\
-| ... | 1 L2 BD with the 2 VLAN subinterfaces,\
-| ... | DUT1 tested with ${nic_name} with VF enabled.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are\
-| ... | generated by TG on links to DUT1. TG traffic profile contains two L3\
-| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
-| ... | and static payload. MAC addresses are matching MAC addresses of the TG\
-| ... | node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
+| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases**
+| ... |
+| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... |
+| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4 for L2 switching \
+| ... | of IPv4. IEEE 802.1Q tagging is applied on both links TG-DUT1.
+| ... |
+| ... | - **[Cfg] DUT configuration:** DUT1 is configured with: \
+| ... | 2 VLAN subinterfaces (VID 100 and 200), \
+| ... | 1 L2 BD with the 2 VLAN subinterfaces. \
+| ... | DUT1 is tested with ${nic_name} with VF enabled.
+| ... |
+| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
+| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
+| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
+| ... | expressed in percentage of packets transmitted. NDR and PDR are \
+| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
+| ... | library.
+| ... | Test packets are \
+| ... | generated by TG on links to DUT1. TG traffic profile contains two L3 \
+| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \
+| ... | all packets containing Ethernet header, IPv4 header with IP \
+| ... | protocol=61 and static payload. MAC addresses are matching MAC \
+| ... | addresses of the TG node interfaces.
+| ... |
+| ... | - **[Ref] Applicable standard specifications:** RFC2544.
 
 *** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
 | ${crypto_type}= | ${None}
 | ${nic_name}= | Intel-X710
 | ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
 | ${osi_layer}= | L2
 | ${overhead}= | ${4}
 # Traffic profile:
-| ${traffic_profile}= | trex-sl-dot1qip4-vlan1ip4src254ip4dst254
+| ${traffic_profile}= | trex-stl-dot1qip4-vlan1ip4src254ip4dst254
 
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD with VLAN with ${phy_cores} physical core(s) for\
-| | ... | worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ... | - **[Cfg]** DUT runs L2BD with VLAN with ${phy_cores} physical \
+| | ... | core(s) for worker threads.
+| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
 | |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
@@ -86,50 +96,50 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| tc01-64B-1c-dot1q-l2bdbasemaclrn-ndrpdr
+| 64B-1c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | 64B | 1C
 | | frame_size=${64} | phy_cores=${1}
 
-| tc02-64B-2c-dot1q-l2bdbasemaclrn-ndrpdr
+| 64B-2c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | 64B | 2C
 | | frame_size=${64} | phy_cores=${2}
 
-| tc03-64B-4c-dot1q-l2bdbasemaclrn-ndrpdr
+| 64B-4c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | 64B | 4C
 | | frame_size=${64} | phy_cores=${4}
 
-| tc04-1518B-1c-dot1q-l2bdbasemaclrn-ndrpdr
+| 1518B-1c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | 1518B | 1C
 | | frame_size=${1518} | phy_cores=${1}
 
-| tc05-1518B-2c-dot1q-l2bdbasemaclrn-ndrpdr
+| 1518B-2c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | 1518B | 2C
 | | frame_size=${1518} | phy_cores=${2}
 
-| tc06-1518B-4c-dot1q-l2bdbasemaclrn-ndrpdr
+| 1518B-4c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | 1518B | 4C
 | | frame_size=${1518} | phy_cores=${4}
 
-| tc07-9000B-1c-dot1q-l2bdbasemaclrn-ndrpdr
+| 9000B-1c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | 9000B | 1C
 | | frame_size=${9000} | phy_cores=${1}
 
-| tc08-9000B-2c-dot1q-l2bdbasemaclrn-ndrpdr
+| 9000B-2c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | 9000B | 2C
 | | frame_size=${9000} | phy_cores=${2}
 
-| tc09-9000B-4c-dot1q-l2bdbasemaclrn-ndrpdr
+| 9000B-4c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | 9000B | 4C
 | | frame_size=${9000} | phy_cores=${4}
 
-| tc10-IMIX-1c-dot1q-l2bdbasemaclrn-ndrpdr
+| IMIX-1c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | IMIX | 1C
 | | frame_size=IMIX_v4_1 | phy_cores=${1}
 
-| tc11-IMIX-2c-dot1q-l2bdbasemaclrn-ndrpdr
+| IMIX-2c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | IMIX | 2C
 | | frame_size=IMIX_v4_1 | phy_cores=${2}
 
-| tc12-IMIX-4c-dot1q-l2bdbasemaclrn-ndrpdr
+| IMIX-4c-dot1q-l2bdbasemaclrn-ndrpdr
 | | [Tags] | IMIX | 4C
 | | frame_size=IMIX_v4_1 | phy_cores=${4}