X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Fperf%2Fl2%2F40ge2p1vic1385-eth-l2bdbasemaclrn-mrr.robot;h=04e50fcb85764567ffa98e61f9139ef49c8af45b;hp=9bd0e7cd8fa968aed7aed004817032d939069fc4;hb=62af070d1834d71405600b930f3c7607dffecbe4;hpb=5f1749877b1fbd57c616933625aede0fb1243db7

diff --git a/tests/vpp/perf/l2/40ge2p1vic1385-eth-l2bdbasemaclrn-mrr.robot b/tests/vpp/perf/l2/40ge2p1vic1385-eth-l2bdbasemaclrn-mrr.robot
index 9bd0e7cd8f..04e50fcb85 100644
--- a/tests/vpp/perf/l2/40ge2p1vic1385-eth-l2bdbasemaclrn-mrr.robot
+++ b/tests/vpp/perf/l2/40ge2p1vic1385-eth-l2bdbasemaclrn-mrr.robot
@@ -31,35 +31,34 @@
 | ...
 | Documentation | *Raw results L2BD test cases*
 | ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
 | ... | with single links between nodes.
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-
-| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with 2p40GE NIC
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\
+| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with 2p40GE NIC\
 | ... | NIC_Cisco-VIC-1385.
-| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
-| ... | at line rate and reports total received/sent packets over trial period.
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
-| ... | payload. MAC addresses are matching MAC addresses of the TG node
-| ... | interfaces.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic\
+| ... | at line rate and reports total received/sent packets over trial period.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per\
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
+| ... | with IP protocol=61 and static payload. MAC addresses are matching\
+| ... | MAC addresses of the TG node interfaces.
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
 # XL710-DA2 (TG) bandwidth limit ~49Gbps/2=24.5Gbps
-| ${s_24.5G} | ${24500000000}
+| ${s_24.5G}= | ${24500000000}
 # XL710-DA2 Mpps (TG) limit 37.5Mpps/2=18.75Mpps
-| ${s_18.75Mpps} | ${18750000}
+| ${s_18.75Mpps=} | ${18750000}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Cfg] Each DUT runs L2BD switching config and uses ${phy_cores}\
+| | ... | physical core(s) for worker threads.
 | | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
 | | ... | trial throughput test.
 | | ...
@@ -76,7 +75,7 @@
 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
 | | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps}
 | | And Apply startup configuration on all VPP DUTs
-| | When Initialize L2 bridge domain in 3-node circular topology
+| | When Initialize L2 bridge domain in circular topology
 | | Then Traffic should pass with maximum rate
 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}