X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Fperf%2Fl2%2F40ge2p1xl710-eth-l2bdbasemaclrn-mrr.robot;h=e875ef61c5bed1c71667ebf5a0b76acc58e6c5fc;hp=a987f468d7f11b3cbe3d63296641f86b74049c4d;hb=3e8a10ce9f0481d610aafa41f3195b0900122eb4;hpb=cc85afad85339d2cc8f035ce63ff21220d8e6b96 diff --git a/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-mrr.robot b/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-mrr.robot index a987f468d7..e875ef61c5 100644 --- a/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-mrr.robot +++ b/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-mrr.robot @@ -17,14 +17,18 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR | ... | NIC_Intel-XL710 | ETH | L2BDMACLRN | BASE +| ... | Suite Setup | Set up 3-node performance topology with DUT's NIC model | ... | L2 | Intel-XL710 +| ... | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local Template +| ... | Documentation | *Raw results L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -35,194 +39,93 @@ | ... | XL710-DA2 by Intel. | ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ | ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 253 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ +| ... | with IP protocol=61 and static payload. MAC addresses are matching\ +| ... | MAC addresses of the TG node interfaces. | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** # XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G} | ${24500000000} +| ${s_24.5G}= | ${24500000000} # XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps} | ${18750000} +| ${s_18.75Mpps}= | ${18750000} # Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for l2bdbasemaclrn +| Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] Each DUT runs L2BD switching config and uses ${phy_cores}\ +| | ... | physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | # Test Variables required for test teardown -| | Set Test Variable | ${framesize} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${get_framesize} -| | ${max_rate}= | Set Variable If -| | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate} +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | And Run Keyword If | ${get_framesize} < ${1522} -| | ... | Add no multi seg to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs -| | When Initialize L2 bridge domain in 3-node circular topology -| | Then Traffic should pass with maximum rate | ${perf_trial_duration} +| | When Initialize L2 bridge domain in circular topology +| | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} *** Test Cases *** -| tc01-64B-1t1c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 64B | 1T1C | STHREAD -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${64} | wt=1 | rxq=1 +| tc01-64B-1c-eth-l2bdbasemaclrn-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} -| tc02-1518B-1t1c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 1518B | 1T1C | STHREAD -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${1518} | wt=1 | rxq=1 +| tc02-64B-2c-eth-l2bdbasemaclrn-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} -| tc03-9000B-1t1c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 9000B | 1T1C | STHREAD -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${9000} | wt=1 | rxq=1 +| tc03-64B-4c-eth-l2bdbasemaclrn-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} -| tc04-IMIX-1t1c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... -| | [Tags] | IMIX | 1T1C | STHREAD -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| tc04-1518B-1c-eth-l2bdbasemaclrn-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} -| tc05-64B-2t2c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 64B | 2T2C | MTHREAD -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${64} | wt=2 | rxq=1 +| tc05-1518B-2c-eth-l2bdbasemaclrn-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} -| tc06-1518B-2t2c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 1518B | 2T2C | MTHREAD -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${1518} | wt=2 | rxq=1 +| tc06-1518B-4c-eth-l2bdbasemaclrn-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} -| tc07-9000B-2t2c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 9000B | 2T2C | MTHREAD -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${9000} | wt=2 | rxq=1 +| tc07-9000B-1c-eth-l2bdbasemaclrn-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} -| tc08-IMIX-2t2c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... -| | [Tags] | IMIX | 2T2C | MTHREAD -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| tc08-9000B-2c-eth-l2bdbasemaclrn-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} -| tc09-64B-4t4c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 64B | 4T4C | MTHREAD -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${64} | wt=4 | rxq=2 +| tc09-9000B-4c-eth-l2bdbasemaclrn-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} -| tc10-1518B-4t4c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 1518B | 4T4C | MTHREAD -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${1518} | wt=4 | rxq=2 +| tc10-IMIX-1c-eth-l2bdbasemaclrn-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} -| tc11-9000B-4t4c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... -| | [Tags] | 9000B | 4T4C | MTHREAD -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${9000} | wt=4 | rxq=2 +| tc11-IMIX-2c-eth-l2bdbasemaclrn-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} -| tc12-IMIX-4t4c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... -| | [Tags] | IMIX | 4T4C | MTHREAD -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| tc12-IMIX-4c-eth-l2bdbasemaclrn-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4}