X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=blobdiff_plain;f=tests%2Fvpp%2Fperf%2Fvm_vhost%2F10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot;h=5b7faee2952f32a652a09f0f80d458c77263f89e;hp=5f9ca6979f575fb7cc2d9662c8b99206902a5377;hb=8bbd6d3bd38a8c13976d33dcf75d4d44f660aaff;hpb=e3bed8e21e3c8b60734ce95eb2bb2a2d371a9907 diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index 5f9ca6979f..5b7faee295 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -28,32 +28,32 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... -| Documentation | *Raw results L2BD test cases with vhost* +| Test Template | Local Template | ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | *Raw results L2BD with vhost and IEEE 802.1Q test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. 802.1q -| ... | tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge- -| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via -| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting -| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M -| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores -| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to -| ... | io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X710 -| ... | by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\ +| ... | 802.1Q tagging is applied on link between DUT1 and DUT2. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ +| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via\ +| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting\ +| ... | vhost-user interfaces, forwarding mode is set to io, rxd/txd=1024.\ +| ... | DUT1 and DUT2 are tested with 2p10GE NIC X710 by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ | ... | addresses of the TG node interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -| ${perf_qemu_qsz}= | 1024 | ${subid}= | 10 | ${tag_rewrite}= | pop-1 +| ${overhead}= | ${4} # Socket names | ${bd_id1}= | 1 | ${bd_id2}= | 2 @@ -65,189 +65,90 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] Each DUT runs L2BD switching with VLAN and uses ${phy_cores}\ +| | ... | physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown -| | Set Test Variable | ${framesize} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} -| | ${jumbo_frames}= | Set Variable If | ${get_framesize} < ${1522} -| | ... | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | And Run Keyword If | ${get_framesize} < ${1522} -| | ... | Add no multi seg to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_limit} | ${framesize} | overhead=${overhead} | | And Apply startup configuration on all VPP DUTs -| | When Initialize L2 bridge domains with Vhost-User and VLAN in a 3-node circular topology +| | When Initialize L2 bridge domains with Vhost-User and VLAN in circular topology | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} | ${subid} | | ... | ${tag_rewrite} | | ${vm1}= | And Configure guest VM with dpdk-testpmd connected via vhost-user -| | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM1 -| | ... | jumbo_frames=${jumbo_frames} +| | ... | DUT1 | ${sock1} | ${sock2} | DUT1_VM1 | jumbo=${jumbo} +| | ... | perf_qemu_qsz=${1024} | use_tuned_cfs=${False} | | Set To Dictionary | ${dut1_vm_refs} | DUT1_VM1 | ${vm1} | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user -| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 -| | ... | jumbo_frames=${jumbo_frames} +| | ... | DUT2 | ${sock1} | ${sock2} | DUT2_VM1 | jumbo=${jumbo} +| | ... | perf_qemu_qsz=${1024} | use_tuned_cfs=${False} | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2} | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} *** Test Cases *** -| tc01-64B-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... +| tc01-64B-1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=1 | rxq=1 - -| tc02-1518B-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... -| | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} -| tc03-9000B-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... -| | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| tc02-64B-2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} -| tc04-IMIX-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... -| | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| tc03-64B-4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} -| tc05-64B-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... -| | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=2 | rxq=1 +| tc04-1518B-1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} -| tc06-1518B-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... +| tc05-1518B-2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=2 | rxq=1 - -| tc07-9000B-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... -| | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} -| tc08-IMIX-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... -| | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| tc06-1518B-4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} -| tc09-64B-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... -| | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=4 | rxq=2 +| tc07-9000B-1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} -| tc10-1518B-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... -| | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| tc08-9000B-2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} -| tc11-9000B-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... +| tc09-9000B-4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} -| tc12-IMIX-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... +| tc10-IMIX-1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4}