create_vhost_user_if_reply: '0x5383d31f' # dev
create_vlan_subif: '0xaf34ac8b' # dev
create_vlan_subif_reply: '0x5383d31f' # dev
+ det44_add_del_map: '0x1150a190' # perf
+ det44_interface_add_del_feature: '0xdc17a836' # perf
+ det44_interface_add_del_feature_reply: '0xe8d4e804' # perf
+ det44_interface_details: '0xe60cc5be' # perf teardown
+ det44_interface_dump: '0x51077d14' # perf teardown
+ det44_map_details: '0xad91dc83' # perf teardown
+ det44_map_dump: '0x51077d14' # perf teardown
+ det44_add_del_map_reply: '0xe8d4e804' # perf teardown
+ det44_plugin_enable_disable: '0xfc4b5d73' # perf
+ det44_plugin_enable_disable_reply: '0xe8d4e804' # perf
+ det44_session_dump: '0xe45a3af7' # perf teardown
# dhcp_proxy_dump / details # honeycomb
gbp_bridge_domain_add: '0x8454bfdf' # dev
gbp_bridge_domain_add_reply: '0xe8d4e804' # dev
nat44_user_dump: '0x51077d14' # perf teardown
nat44_user_session_details: '0x1965fd69' # perf teardown
nat44_user_session_dump: '0xe1899c98' # perf teardown
- nat_det_add_del_map: '0x112fde05' # perf
- nat_det_add_del_map_reply: '0xe8d4e804' # perf
nat_show_config: '0x51077d14' # perf teardown
nat_show_config_reply: '0x7903ef06' # perf teardown
nat_worker_details: '0x84bf06fc' # perf teardown
from resources.libraries.python.Constants import Constants
from resources.libraries.python.InterfaceUtil import InterfaceUtil
+from resources.libraries.python.topology import Topology
from resources.libraries.python.PapiExecutor import PapiSocketExecutor
"""Set inside and outside interfaces for NAT44.
:param node: DUT node.
- :param interface: Inside interface.
+ :param interface: NAT44 interface.
:param flag: Interface NAT configuration flag name.
:type node: dict
:type interface: str
NATUtil.set_nat44_interface(node, int_in, u"NAT_IS_INSIDE")
NATUtil.set_nat44_interface(node, int_out, u"NAT_IS_OUTSIDE")
- @staticmethod
- def set_nat44_deterministic(node, ip_in, subnet_in, ip_out, subnet_out):
- """Set deterministic behaviour of NAT44.
-
- :param node: DUT node.
- :param ip_in: Inside IP.
- :param subnet_in: Inside IP subnet.
- :param ip_out: Outside IP.
- :param subnet_out: Outside IP subnet.
- :type node: dict
- :type ip_in: str
- :type subnet_in: str or int
- :type ip_out: str
- :type subnet_out: str or int
- """
- cmd = u"nat_det_add_del_map"
- err_msg = f"Failed to set deterministic behaviour of NAT " \
- f"on host {node[u'host']}"
- args_in = dict(
- is_add=True,
- in_addr=IPv4Address(str(ip_in)).packed,
- in_plen=int(subnet_in),
- out_addr=IPv4Address(str(ip_out)).packed,
- out_plen=int(subnet_out)
- )
-
- with PapiSocketExecutor(node) as papi_exec:
- papi_exec.add(cmd, **args_in).get_reply(err_msg)
-
@staticmethod
def set_nat44_address_range(
node, start_ip, end_ip, vrf_id=Constants.BITWISE_NON_ZERO,
:param node: DUT node.
:type node: dict
"""
- cmd = u"nat_show_config"
- err_msg = f"Failed to get NAT base data on host {node[u'host']}"
-
- with PapiSocketExecutor(node) as papi_exec:
- reply = papi_exec.add(cmd).get_reply(err_msg)
-
- logger.debug(f"NAT Configuration:\n{pformat(reply)}")
-
cmds = [
u"nat_worker_dump",
u"nat44_interface_addr_dump",
:param node: DUT node.
:type node: dict
"""
- cmd = u"nat_show_config"
- err_msg = f"Failed to get NAT user data on host {node[u'host']}"
+ cmds = [
+ u"nat44_user_dump",
+ u"nat44_user_session_dump",
+ ]
+ PapiSocketExecutor.dump_and_log(node, cmds)
+
+ # DET44 PAPI calls
+ # DET44 means deterministic mode of NAT
+ @staticmethod
+ def enable_det44_plugin(node, inside_vrf=0, outside_vrf=0):
+ """Enable DET44 plugin.
+
+ :param node: DUT node.
+ :param inside_vrf: Inside VRF ID.
+ :param outside_vrf: Outside VRF ID.
+ :type node: dict
+ :type inside_vrf: str or int
+ :type outside_vrf: str or int
+ """
+ cmd = u"det44_plugin_enable_disable"
+ err_msg = f"Failed to enable DET44 plugin on the host {node[u'host']}!"
+ args_in = dict(
+ enable=True,
+ inside_vrf=int(inside_vrf),
+ outside_vrf=int(outside_vrf)
+ )
with PapiSocketExecutor(node) as papi_exec:
- reply = papi_exec.add(cmd).get_reply(err_msg)
+ papi_exec.add(cmd, **args_in).get_reply(err_msg)
- logger.debug(f"NAT Configuration:\n{pformat(reply)}")
+ @staticmethod
+ def set_det44_interface(node, if_key, is_inside):
+ """Enable DET44 feature on the interface.
+
+ :param node: DUT node.
+ :param if_key: Interface key from topology file of interface
+ to enable DET44 feature on.
+ :param is_inside: True if interface is inside, False if outside.
+ :type node: dict
+ :type if_key: str
+ :type is_inside: bool
+ """
+ cmd = u"det44_interface_add_del_feature"
+ err_msg = f"Failed to enable DET44 feature on the interface {if_key} " \
+ f"on the host {node[u'host']}!"
+ args_in = dict(
+ is_add=True,
+ is_inside=is_inside,
+ sw_if_index=Topology.get_interface_sw_index(node, if_key)
+ )
+
+ with PapiSocketExecutor(node) as papi_exec:
+ papi_exec.add(cmd, **args_in).get_reply(err_msg)
+
+ @staticmethod
+ def set_det44_mapping(node, ip_in, subnet_in, ip_out, subnet_out):
+ """Set DET44 mapping.
+ :param node: DUT node.
+ :param ip_in: Inside IP.
+ :param subnet_in: Inside IP subnet.
+ :param ip_out: Outside IP.
+ :param subnet_out: Outside IP subnet.
+ :type node: dict
+ :type ip_in: str
+ :type subnet_in: str or int
+ :type ip_out: str
+ :type subnet_out: str or int
+ """
+ cmd = u"det44_add_del_map"
+ err_msg = f"Failed to set DET44 mapping on the host {node[u'host']}!"
+ args_in = dict(
+ is_add=True,
+ in_addr=IPv4Address(str(ip_in)).packed,
+ in_plen=int(subnet_in),
+ out_addr=IPv4Address(str(ip_out)).packed,
+ out_plen=int(subnet_out)
+ )
+
+ with PapiSocketExecutor(node) as papi_exec:
+ papi_exec.add(cmd, **args_in).get_reply(err_msg)
+
+ @staticmethod
+ def show_det44(node):
+ """Show DET44 data.
+
+ Used data sources:
+
+ det44_interface_dump
+ det44_map_dump
+ det44_session_dump
+
+ :param node: DUT node.
+ :type node: dict
+ """
cmds = [
- u"nat44_user_dump",
- u"nat44_user_session_dump",
+ u"det44_interface_dump",
+ u"det44_map_dump",
+ u"det44_session_dump",
]
PapiSocketExecutor.dump_and_log(node, cmds)
| | ... | ${node['interfaces']['${int_out}']['name']}
| | Set NAT44 Interfaces | ${node} | ${int_in_name} | ${int_out_name}
-| Configure deterministic mode for NAT44
-| | [Documentation] | Set deterministic behaviour of NAT44.
-| |
-| | ... | *Arguments:*
-| | ... | - node - DUT node to set deterministic mode for NAT44 on.
-| | ... | Type: dictionary
-| | ... | - ip_in - Inside IP. Type: string
-| | ... | - subnet_in - Inside IP subnet. Type: string
-| | ... | - ip_out - Outside IP. Type: string
-| | ... | - subnet_out - Outside IP subnet. Type: string
-| |
-| | ... | *Example:*
-| |
-| | ... | \| Configure deterministic mode for NAT44 \| ${nodes['DUT1']} \
-| | ... | \| 100.0.0.0 \| 12 \| 12.1.1.0 \| 24 \|
-| |
-| | [Arguments] | ${node} | ${ip_in} | ${subnet_in} | ${ip_out} | ${subnet_out}
-| |
-| | Set NAT44 deterministic | ${node} | ${ip_in} | ${subnet_in} | ${ip_out}
-| | ... | ${subnet_out}
-
-| Show NAT verbose
-| | [Documentation] | Get the NAT settings on the node.
-| |
-| | ... | *Arguments:*
-| | ... | - node - DUT node to show NAT. Type: dictionary
-| |
-| | ... | *Example:*
-| |
-| | ... | \| Show NAT verbose \| ${nodes['DUT1']} \|
-| |
-| | [Arguments] | ${node}
-| |
-| | Show NAT | ${node}
-
-| Initialize NAT44 deterministic mode in circular topology
-| | [Documentation] | Initialization of NAT44 deterministic mode on DUT1
-| |
-| | Configure inside and outside interfaces
-| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${DUT1_${int}2}[0]
-| | Configure deterministic mode for NAT44
-| | ... | ${dut1} | ${in_net} | ${in_mask} | ${out_net} | ${out_mask}
-
| Initialize NAT44 endpoint-dependent mode in circular topology
| | [Documentation] | Initialization of NAT44 endpoint-dependent mode on DUT1
| |
| | ... | Vpp Route Add
| | ... | ${dut2} | ${out_net} | ${out_mask} | gateway=${dut1_if2_ip4}
| | ... | interface=${DUT2_${int}1}[0]
+
+# DET44 - NAT44 deterministic
+| Enable DET44 plugin on DUT
+| | [Documentation] | Enable DET44 plugin on DUT.
+| |
+| | ... | *Arguments:*
+| | ... | - node - DUT node to enablr DET44 on.
+| | ... | Type: dictionary
+| | ... | - inside_vrf - Inside VRF ID; default value: 0.
+| | ... | Type: string or integer
+| | ... | - outside_vrf - Outside VRF ID; default value: 0.
+| | ... | Type: string or integer
+| |
+| | ... | *Example:*
+| |
+| | ... | \| Enable DET44 plugin on all DUTs \|
+| |
+| | [Arguments] | ${node} | ${inside_vrf}=${0} | ${outside_vrf}=${0}
+| |
+| | Enable DET44 Plugin
+| | ... | ${node} | inside_vrf=${inside_vrf} | outside_vrf=${outside_vrf}
+
+| Configure DET44 interfaces
+| | [Documentation] | Configure inside and outside interfaces for DET44.
+| |
+| | ... | *Arguments:*
+| | ... | - node - DUT node to set DET44 interfaces on. Type: dictionary
+| | ... | - int_in - Inside interface key. Type: string
+| | ... | - int_out - Outside interface key. Type: string
+| |
+| | ... | *Example:*
+| |
+| | ... | \| Configure DET44 interfaces \| ${nodes['DUT1']} \| port5 \| port6 \|
+| |
+| | [Arguments] | ${node} | ${int_in} | ${int_out}
+| |
+| | Set DET44 Interface | ${dut1} | ${int_in} | is_inside=${True}
+| | Set DET44 Interface | ${dut1} | ${int_out} | is_inside=${False}
+
+| Configure deterministic mode for NAT44
+| | [Documentation] | Set deterministic behaviour of NAT44 (DET44).
+| |
+| | ... | *Arguments:*
+| | ... | - node - DUT node to set deterministic mode for NAT44 on.
+| | ... | Type: dictionary
+| | ... | - ip_in - Inside IP. Type: string
+| | ... | - subnet_in - Inside IP subnet. Type: string
+| | ... | - ip_out - Outside IP. Type: string
+| | ... | - subnet_out - Outside IP subnet. Type: string
+| |
+| | ... | *Example:*
+| |
+| | ... | \| Configure deterministic mode for NAT44 \| ${nodes['DUT1']} \
+| | ... | \| 100.0.0.0 \| 12 \| 12.1.1.0 \| 24 \|
+| |
+| | [Arguments] | ${node} | ${ip_in} | ${subnet_in} | ${ip_out} | ${subnet_out}
+| |
+| | Set DET44 Mapping
+| | ... | ${node} | ${ip_in} | ${subnet_in} | ${ip_out} | ${subnet_out}
+
+| Initialize NAT44 deterministic mode in circular topology
+| | [Documentation] | Initialization of NAT44 deterministic mode (DET44)
+| | ... | on DUT1.
+| |
+| | Enable DET44 plugin on DUT | ${dut1}
+| | Configure DET44 interfaces
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${DUT1_${int}2}[0]
+| | Configure deterministic mode for NAT44
+| | ... | ${dut1} | ${in_net} | ${in_mask} | ${out_net} | ${out_mask}
+
+| Show DET44 verbose
+| | [Documentation] | Get DET44 settings on the node.
+| |
+| | ... | *Arguments:*
+| | ... | - node - DUT node to show NAT. Type: dictionary
+| |
+| | ... | *Example:*
+| |
+| | ... | \| Show DET44 verbose \| ${nodes['DUT1']} \|
+| |
+| | [Arguments] | ${node}
+| |
+| | Show DET44 | ${node}
| | ... | Keyword Should Exist | vnf_manager.Kill All VMs
| | Run Keyword If | '${vnf_status}' == 'PASS' | vnf_manager.Kill All VMs
-| Additional Test Tear Down Action For nat
+| Additional Test Tear Down Action For det44
| | [Documentation]
-| | ... | Additional teardown for tests which uses NAT feature.
+| | ... | Additional teardown for tests which uses DET44 feature.
| |
| | FOR | ${dut} | IN | @{duts}
-| | | Run Keyword If Test Failed
-| | | ... | Show NAT verbose | ${nodes['${dut}']}
+#| | | Run Keyword If Test Failed
+#| | | ... | Show DET44 verbose | ${nodes['${dut}']}
+| | | Show DET44 verbose | ${nodes['${dut}']}
| | END
| Additional Test Tear Down Action For nat-ed
+++ /dev/null
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | BASE | SRC_USER_1
-| ... | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4base-udpsrcscale15-nat44
-|
-| Suite Setup | Setup suite topology interfaces | performance
-| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | nat
-|
-| Test Template | Local Template
-|
-| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
-| ... | routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2
-| ... | tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, one flow per flow-group) with all packets
-| ... | containing Ethernet header, IPv4 header with UDP header and static
-| ... | payload. MAC addresses are matching MAC addresses of the TG node
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${osi_layer}= | L3
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-stl-3n-ethip4udp-1u15p
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize NAT44 in circular topology
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| 64B-1c-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| 64B-2c-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| 64B-4c-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| 1518B-1c-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| 1518B-2c-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| 1518B-4c-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| 9000B-1c-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| 9000B-2c-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| 9000B-4c-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| IMIX-1c-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| IMIX-2c-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| IMIX-4c-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
+++ /dev/null
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_1
-| ... | BASE | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4base-udpsrcscale63-nat44
-|
-| Suite Setup | Setup suite topology interfaces | performance
-| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | nat
-|
-| Test Template | Local Template
-|
-| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing two static IPv4 /24 and IPv4 /22 route entries on DUT1 and two\
-| ... | static IPv4 /32 and IPv4 /24 route entries on DUT2. DUT1 and DUT2\
-| ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, one flow per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${osi_layer}= | L3
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-stl-ethip4udp-1u63p
-# IP addressing
-| ${tg_if1_ip4}= | 10.0.0.2
-| ${tg_if1_mask}= | 20
-| ${tg_if2_ip4}= | 12.0.0.2
-| ${tg_if2_mask}= | 20
-| ${dut1_if1_ip4}= | 10.0.0.1
-| ${dut1_if1_mask}= | 20
-| ${dut1_if2_ip4}= | 11.0.0.1
-| ${dut1_if2_mask}= | 20
-| ${dut2_if1_ip4}= | 11.0.0.2
-| ${dut2_if1_mask}= | 20
-| ${dut2_if2_ip4}= | 12.0.0.1
-| ${dut2_if2_mask}= | 20
-| ${inside_net}= | 192.168.0.0
-| ${inside_mask}= | 22
-| ${nat_net}= | 68.142.68.0
-| ${nat_mask}= | 32
-| ${dest_net}= | 20.0.0.0
-| ${dest_mask}= | 24
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize NAT44 in circular topology
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| 64B-1c-ethip4udp-ip4base-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| 64B-2c-ethip4udp-ip4base-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| 64B-4c-ethip4udp-ip4base-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| 1518B-1c-ethip4udp-ip4base-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| 1518B-2c-ethip4udp-ip4base-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| 1518B-4c-ethip4udp-ip4base-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| 9000B-1c-ethip4udp-ip4base-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| 9000B-2c-ethip4udp-ip4base-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| 9000B-4c-ethip4udp-ip4base-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| IMIX-1c-ethip4udp-ip4base-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| IMIX-2c-ethip4udp-ip4base-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| IMIX-4c-ethip4udp-ip4base-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
+++ /dev/null
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_10
-| ... | SCALE | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4scale10-udpsrcscale15-nat44
-|
-| Suite Setup | Setup suite topology interfaces | performance
-| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | nat
-|
-| Test Template | Local Template
-|
-| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
-| ... | routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2
-| ... | tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, one flow per flow-group) with all packets
-| ... | containing Ethernet header, IPv4 header with UDP header and static
-| ... | payload. MAC addresses are matching MAC addresses of the TG node
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${osi_layer}= | L3
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u15p
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize NAT44 in circular topology
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| 64B-1c-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| 64B-2c-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| 64B-4c-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| 1518B-1c-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| 1518B-2c-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| 1518B-4c-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| 9000B-1c-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| 9000B-2c-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| 9000B-4c-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| IMIX-1c-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| IMIX-2c-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| IMIX-4c-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
+++ /dev/null
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_100
-| ... | SCALE | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4scale100-udpsrcscale15-nat44
-|
-| Suite Setup | Setup suite topology interfaces | performance
-| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | nat
-|
-| Test Template | Local Template
-|
-| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
-| ... | routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2
-| ... | tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, one flow per flow-group) with all packets
-| ... | containing Ethernet header, IPv4 header with UDP header and static
-| ... | payload. MAC addresses are matching MAC addresses of the TG node
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${osi_layer}= | L3
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-stl-3n-ethip4udp-100u15p
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize NAT44 in circular topology
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| 64B-1c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| 64B-2c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| 64B-4c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| 1518B-1c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| 1518B-2c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| 1518B-4c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| 9000B-1c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| 9000B-2c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| 9000B-4c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| IMIX-1c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| IMIX-2c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| IMIX-4c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
+++ /dev/null
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_1000
-| ... | SCALE | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4scale1000-udpsrcscale15-nat44
-|
-| Suite Setup | Setup suite topology interfaces | performance
-| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | nat
-|
-| Test Template | Local Template
-|
-| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
-| ... | routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2
-| ... | tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${osi_layer}= | L3
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-stl-3n-ethip4udp-1000u15p
-
-*** Keywords ***
-| Local Template
-| |
-| | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize NAT44 in circular topology
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| 64B-1c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| 64B-2c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| 64B-4c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| 1518B-1c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| 1518B-2c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| 1518B-4c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| 9000B-1c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| 9000B-2c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| 9000B-4c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| IMIX-1c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| IMIX-2c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| IMIX-4c-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
+++ /dev/null
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_1024
-| ... | SCALE | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4scale1024-udpsrcscale63-nat44
-|
-| Suite Setup | Setup suite topology interfaces | performance
-| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | nat
-|
-| Test Template | Local Template
-|
-| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing two static IPv4 /24 and IPv4 /22 route entries on DUT1 and two\
-| ... | static IPv4 /32 and IPv4 /24 route entries on DUT2. DUT1 and DUT2\
-| ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, one flow per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${osi_layer}= | L3
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-stl-ethip4udp-1024u63p
-# IP addressing
-| ${tg_if1_ip4}= | 10.0.0.2
-| ${tg_if1_mask}= | 20
-| ${tg_if2_ip4}= | 12.0.0.2
-| ${tg_if2_mask}= | 20
-| ${dut1_if1_ip4}= | 10.0.0.1
-| ${dut1_if1_mask}= | 20
-| ${dut1_if2_ip4}= | 11.0.0.1
-| ${dut1_if2_mask}= | 20
-| ${dut2_if1_ip4}= | 11.0.0.2
-| ${dut2_if1_mask}= | 20
-| ${dut2_if2_ip4}= | 12.0.0.1
-| ${dut2_if2_mask}= | 20
-| ${inside_net}= | 192.168.0.0
-| ${inside_mask}= | 22
-| ${nat_net}= | 68.142.68.0
-| ${nat_mask}= | 32
-| ${dest_net}= | 20.0.0.0
-| ${dest_mask}= | 24
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize NAT44 in circular topology
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| 64B-1c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| 64B-2c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| 64B-4c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| 1518B-1c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| 1518B-2c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| 1518B-4c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| 9000B-1c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| 9000B-2c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| 9000B-4c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| IMIX-1c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| IMIX-2c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| IMIX-4c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
+++ /dev/null
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_1048576
-| ... | SCALE | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4scale1048576-udpsrcscale63-nat44
-|
-| Suite Setup | Setup suite topology interfaces | performance
-| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | nat
-|
-| Test Template | Local Template
-|
-| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing two static IPv4 /24 and IPv4 /12 route entries on DUT1 and two\
-| ... | static IPv4 /22 and IPv4 /24 route entries on DUT2. DUT1 and DUT2\
-| ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, one flow per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${osi_layer}= | L3
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-stl-ethip4udp-1048576u63p
-# IP addresing
-| ${tg_if1_ip4}= | 10.0.0.2
-| ${tg_if1_mask}= | 20
-| ${tg_if2_ip4}= | 12.0.0.2
-| ${tg_if2_mask}= | 20
-| ${dut1_if1_ip4}= | 10.0.0.1
-| ${dut1_if1_mask}= | 20
-| ${dut1_if2_ip4}= | 11.0.0.1
-| ${dut1_if2_mask}= | 20
-| ${dut2_if1_ip4}= | 11.0.0.2
-| ${dut2_if1_mask}= | 20
-| ${dut2_if2_ip4}= | 12.0.0.1
-| ${dut2_if2_mask}= | 20
-| ${inside_net}= | 172.16.0.0
-| ${inside_mask}= | 12
-| ${nat_net}= | 68.142.68.0
-| ${nat_mask}= | 22
-| ${dest_net}= | 20.0.0.0
-| ${dest_mask}= | 24
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize NAT44 in circular topology
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| 64B-1c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| 64B-2c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| 64B-4c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| 1518B-1c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| 1518B-2c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| 1518B-4c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| 9000B-1c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| 9000B-2c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| 9000B-4c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| IMIX-1c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| IMIX-2c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| IMIX-4c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
+++ /dev/null
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_16384
-| ... | SCALE | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4scale16384-udpsrcscale63-nat44
-|
-| Suite Setup | Setup suite topology interfaces | performance
-| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | nat
-|
-| Test Template | Local Template
-|
-| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing two static IPv4 /24 and IPv4 /18 route entries on DUT1 and two\
-| ... | static IPv4 /28 and IPv4 /24 route entries on DUT2. DUT1 and DUT2\
-| ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, one flow per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${osi_layer}= | L3
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-stl-ethip4udp-16384u63p
-# IP addressing
-| ${tg_if1_ip4}= | 10.0.0.2
-| ${tg_if1_mask}= | 20
-| ${tg_if2_ip4}= | 12.0.0.2
-| ${tg_if2_mask}= | 20
-| ${dut1_if1_ip4}= | 10.0.0.1
-| ${dut1_if1_mask}= | 20
-| ${dut1_if2_ip4}= | 11.0.0.1
-| ${dut1_if2_mask}= | 20
-| ${dut2_if1_ip4}= | 11.0.0.2
-| ${dut2_if1_mask}= | 20
-| ${dut2_if2_ip4}= | 12.0.0.1
-| ${dut2_if2_mask}= | 20
-| ${inside_net}= | 192.168.0.0
-| ${inside_mask}= | 18
-| ${nat_net}= | 68.142.68.0
-| ${nat_mask}= | 28
-| ${dest_net}= | 20.0.0.0
-| ${dest_mask}= | 24
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize NAT44 in circular topology
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| 64B-1c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| 64B-2c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| 64B-4c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| 1518B-1c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| 1518B-2c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| 1518B-4c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| 9000B-1c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| 9000B-2c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| 9000B-4c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| IMIX-1c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| IMIX-2c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| IMIX-4c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
+++ /dev/null
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_2000
-| ... | SCALE | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4scale2000-udpsrcscale15-nat44
-|
-| Suite Setup | Setup suite topology interfaces | performance
-| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | nat
-|
-| Test Template | Local Template
-|
-| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
-| ... | routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2
-| ... | tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, one flow per flow-group) with all packets
-| ... | containing Ethernet header, IPv4 header with UDP header and static
-| ... | payload. MAC addresses are matching MAC addresses of the TG node
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${osi_layer}= | L3
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-stl-3n-ethip4udp-2000u15p
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize NAT44 in circular topology
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| 64B-1c-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| 64B-2c-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| 64B-4c-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| 1518B-1c-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| 1518B-2c-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| 1518B-4c-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| 9000B-1c-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| 9000B-2c-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| 9000B-4c-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| IMIX-1c-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| IMIX-2c-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| IMIX-4c-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
+++ /dev/null
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_238
-| ... | SCALE | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4scale238-udpsrcscale63-nat44
-|
-| Suite Setup | Setup suite topology interfaces | performance
-| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | nat
-|
-| Test Template | Local Template
-|
-| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing two static IPv4 /24 and IPv4 /22 route entries on DUT1 and two\
-| ... | static IPv4 /32 and IPv4 /24 route entries on DUT2. DUT1 and DUT2\
-| ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, one flow per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${osi_layer}= | L3
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-stl-ethip4udp-238u63p
-# IP addressing
-| ${tg_if1_ip4}= | 10.0.0.2
-| ${tg_if1_mask}= | 20
-| ${tg_if2_ip4}= | 12.0.0.2
-| ${tg_if2_mask}= | 20
-| ${dut1_if1_ip4}= | 10.0.0.1
-| ${dut1_if1_mask}= | 20
-| ${dut1_if2_ip4}= | 11.0.0.1
-| ${dut1_if2_mask}= | 20
-| ${dut2_if1_ip4}= | 11.0.0.2
-| ${dut2_if1_mask}= | 20
-| ${dut2_if2_ip4}= | 12.0.0.1
-| ${dut2_if2_mask}= | 20
-| ${inside_net}= | 192.168.0.0
-| ${inside_mask}= | 22
-| ${nat_net}= | 68.142.68.0
-| ${nat_mask}= | 32
-| ${dest_net}= | 20.0.0.0
-| ${dest_mask}= | 24
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize NAT44 in circular topology
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| 64B-1c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| 64B-2c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| 64B-4c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| 1518B-1c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| 1518B-2c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| 1518B-4c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| 9000B-1c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| 9000B-2c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| 9000B-4c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| IMIX-1c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| IMIX-2c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| IMIX-4c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
+++ /dev/null
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_262144
-| ... | SCALE | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4scale262144-udpsrcscale63-nat44
-|
-| Suite Setup | Setup suite topology interfaces | performance
-| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | nat
-|
-| Test Template | Local Template
-|
-| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing two static IPv4 /24 and IPv4 /14 route entries on DUT1 and two\
-| ... | static IPv4 /24 route entries on DUT2. DUT1 and DUT2\
-| ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, one flow per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${osi_layer}= | L3
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-stl-ethip4udp-262144u63p
-# IP addresing
-| ${tg_if1_ip4}= | 10.0.0.2
-| ${tg_if1_mask}= | 20
-| ${tg_if2_ip4}= | 12.0.0.2
-| ${tg_if2_mask}= | 20
-| ${dut1_if1_ip4}= | 10.0.0.1
-| ${dut1_if1_mask}= | 20
-| ${dut1_if2_ip4}= | 11.0.0.1
-| ${dut1_if2_mask}= | 20
-| ${dut2_if1_ip4}= | 11.0.0.2
-| ${dut2_if1_mask}= | 20
-| ${dut2_if2_ip4}= | 12.0.0.1
-| ${dut2_if2_mask}= | 20
-| ${inside_net}= | 172.16.0.0
-| ${inside_mask}= | 14
-| ${nat_net}= | 68.142.68.0
-| ${nat_mask}= | 24
-| ${dest_net}= | 20.0.0.0
-| ${dest_mask}= | 24
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize NAT44 in circular topology
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| 64B-1c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| 64B-2c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| 64B-4c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| 1518B-1c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| 1518B-2c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| 1518B-4c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| 9000B-1c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| 9000B-2c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| 9000B-4c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| IMIX-1c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| IMIX-2c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| IMIX-4c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
+++ /dev/null
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_4000
-| ... | SCALE | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4scale4000-udpsrcscale15-nat44
-|
-| Suite Setup | Setup suite topology interfaces | performance
-| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | nat
-|
-| Test Template | Local Template
-|
-| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
-| ... | routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2
-| ... | tested with ${nic_name}.\
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, one flow per flow-group) with all packets
-| ... | containing Ethernet header, IPv4 header with UDP header and static
-| ... | payload. MAC addresses are matching MAC addresses of the TG node
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${osi_layer}= | L3
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-stl-3n-ethip4udp-4000u15p
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize NAT44 in circular topology
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| 64B-1c-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| 64B-2c-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| 64B-4c-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| 1518B-1c-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| 1518B-2c-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| 1518B-4c-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| 9000B-1c-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| 9000B-2c-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| 9000B-4c-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| IMIX-1c-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| IMIX-2c-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| IMIX-4c-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
+++ /dev/null
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_4096
-| ... | SCALE | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4scale4096-udpsrcscale63-nat44
-|
-| Suite Setup | Setup suite topology interfaces | performance
-| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | nat
-|
-| Test Template | Local Template
-|
-| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing two static IPv4 /24 and IPv4 /20 route entries on DUT1 and two\
-| ... | static IPv4 /30 and IPv4 /24 route entries on DUT2. DUT1 and DUT2\
-| ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, one flow per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${osi_layer}= | L3
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-stl-ethip4udp-4096u63p
-# IP addressing
-| ${tg_if1_ip4}= | 10.0.0.2
-| ${tg_if1_mask}= | 20
-| ${tg_if2_ip4}= | 12.0.0.2
-| ${tg_if2_mask}= | 20
-| ${dut1_if1_ip4}= | 10.0.0.1
-| ${dut1_if1_mask}= | 20
-| ${dut1_if2_ip4}= | 11.0.0.1
-| ${dut1_if2_mask}= | 20
-| ${dut2_if1_ip4}= | 11.0.0.2
-| ${dut2_if1_mask}= | 20
-| ${dut2_if2_ip4}= | 12.0.0.1
-| ${dut2_if2_mask}= | 20
-| ${inside_net}= | 192.168.0.0
-| ${inside_mask}= | 20
-| ${nat_net}= | 68.142.68.0
-| ${nat_mask}= | 30
-| ${dest_net}= | 20.0.0.0
-| ${dest_mask}= | 24
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize NAT44 in circular topology
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| 64B-1c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| 64B-2c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| 64B-4c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| 1518B-1c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| 1518B-2c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| 1518B-4c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| 9000B-1c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| 9000B-2c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| 9000B-4c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| IMIX-1c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| IMIX-2c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| IMIX-4c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
+++ /dev/null
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_65536
-| ... | SCALE | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4scale65536-udpsrcscale63-nat44
-|
-| Suite Setup | Setup suite topology interfaces | performance
-| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | nat
-|
-| Test Template | Local Template
-|
-| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing two static IPv4 /24 and IPv4 /16 route entries on DUT1 and two\
-| ... | static IPv4 /26 and IPv4 /24 route entries on DUT2. DUT1 and DUT2\
-| ... | tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, one flow per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with UDP header and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${osi_layer}= | L3
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-stl-ethip4udp-65536u63p
-# IP addresing
-| ${tg_if1_ip4}= | 10.0.0.2
-| ${tg_if1_mask}= | 20
-| ${tg_if2_ip4}= | 12.0.0.2
-| ${tg_if2_mask}= | 20
-| ${dut1_if1_ip4}= | 10.0.0.1
-| ${dut1_if1_mask}= | 20
-| ${dut1_if2_ip4}= | 11.0.0.1
-| ${dut1_if2_mask}= | 20
-| ${dut2_if1_ip4}= | 11.0.0.2
-| ${dut2_if1_mask}= | 20
-| ${dut2_if2_ip4}= | 12.0.0.1
-| ${dut2_if2_mask}= | 20
-| ${inside_net}= | 192.168.0.0
-| ${inside_mask}= | 16
-| ${nat_net}= | 68.142.68.0
-| ${nat_mask}= | 26
-| ${dest_net}= | 20.0.0.0
-| ${dest_mask}= | 24
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize NAT44 in circular topology
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| 64B-1c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| 64B-2c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| 64B-4c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| 1518B-1c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| 1518B-2c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| 1518B-4c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| 9000B-1c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| 9000B-2c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| 9000B-4c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| IMIX-1c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| IMIX-2c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| IMIX-4c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
+++ /dev/null
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | NAT44_DETERMINISTIC
-| ... | SRC_USER_1048576 | SCALE | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ei
-|
-| Suite Setup | Setup suite topology interfaces | performance
-| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | nat
-|
-| Test Template | Local Template
-|
-| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | two static IPv4 /12 and IPv4 /24 route entries.\
-| ... | DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with UDP header and static payload. MAC addresses are matching MAC\
-| ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${osi_layer}= | L3
-| ${overhead}= | ${0}
-# IP addresing
-| ${tg_if1_ip4}= | 10.0.0.2
-| ${tg_if1_mask}= | ${20}
-| ${tg_if2_ip4}= | 12.0.0.2
-| ${tg_if2_mask}= | ${20}
-| ${dut1_if1_ip4}= | 10.0.0.1
-| ${dut1_if1_mask}= | ${20}
-| ${dut1_if2_ip4}= | 11.0.0.1
-| ${dut1_if2_mask}= | ${20}
-| ${dest_net}= | 20.0.0.0
-| ${dest_mask}= | ${24}
-# NAT settings
-| ${nat_mode}= | deterministic
-| ${in_net}= | 172.16.0.0
-| ${in_mask}= | ${12}
-| ${out_net}= | 68.142.68.0
-| ${out_mask}= | ${22}
-# Traffic profile:
-| ${traffic_profile}= | trex-stl-ethip4udp-1048576u63p
-
-*** Keywords ***
-| Local Template
-| |
-| | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs | nat_mode=${nat_mode}
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize IPv4 forwarding for NAT44 in circular topology
-| | And Initialize NAT44 deterministic mode in circular topology
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| 64B-1c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| 64B-2c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| 64B-4c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| 1518B-1c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| 1518B-2c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| 1518B-4c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| 9000B-1c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| 9000B-2c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| 9000B-4c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| IMIX-1c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| IMIX-2c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| IMIX-4c-ethip4udp-ip4scale1048576-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
+++ /dev/null
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | NAT44_DETERMINISTIC
-| ... | SRC_USER_238 | SCALE | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4scale238-udpsrcscale63-nat44-ei
-|
-| Suite Setup | Setup suite topology interfaces | performance
-| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | nat
-|
-| Test Template | Local Template
-|
-| Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
-| ... | two static IPv4 /22 and IPv4 /24 route entries.\
-| ... | DUT1 is tested with ${nic_name}.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
-| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per\
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
-| ... | with UDP header and static payload. MAC addresses are matching MAC\
-| ... | addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${osi_layer}= | L3
-| ${overhead}= | ${0}
-# IP addresing
-| ${tg_if1_ip4}= | 10.0.0.2
-| ${tg_if1_mask}= | ${20}
-| ${tg_if2_ip4}= | 12.0.0.2
-| ${tg_if2_mask}= | ${20}
-| ${dut1_if1_ip4}= | 10.0.0.1
-| ${dut1_if1_mask}= | ${20}
-| ${dut1_if2_ip4}= | 11.0.0.1
-| ${dut1_if2_mask}= | ${20}
-| ${dest_net}= | 20.0.0.0
-| ${dest_mask}= | ${24}
-# NAT settings
-| ${nat_mode}= | deterministic
-| ${in_net}= | 192.168.0.0
-| ${in_mask}= | ${32}
-| ${out_net}= | 68.142.68.0
-| ${out_mask}= | ${22}
-# Traffic profile:
-| ${traffic_profile}= | trex-stl-ethip4udp-238u63p
-
-*** Keywords ***
-| Local Template
-| |
-| | [Documentation]
-| | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs | nat_mode=${nat_mode}
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize IPv4 forwarding for NAT44 in circular topology
-| | And Initialize NAT44 deterministic mode in circular topology
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| 64B-1c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| 64B-2c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| 64B-4c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| 1518B-1c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| 1518B-2c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| 1518B-4c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| 9000B-1c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| 9000B-2c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| 9000B-4c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| IMIX-1c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| IMIX-2c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| IMIX-4c-ethip4udp-ip4scale238-udpsrcscale63-nat44-ei-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | NAT44_DETERMINISTIC
| ... | BASE | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4base-nat44-ei
+| ... | ethip4udp-snat44det-h1-p1-s1
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance
+| Test Teardown | Tear down test | performance | det44
|
| Test Template | Local Template
|
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
+| @{plugins_to_enable}= | dpdk_plugin.so | det44_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| | Given Set Max Rate And Jumbo
| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs | nat_mode=${nat_mode}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
-| 64B-1c-ethip4udp-ip4base-nat44-ei-ndrpdr
+| 64B-1c-ethip4udp-snat44det-h1-p1-s1-ndrpdr
| | [Tags] | 64B | 1C
| | frame_size=${64} | phy_cores=${1}
-| 64B-2c-ethip4udp-ip4base-nat44-ei-ndrpdr
+| 64B-2c-ethip4udp-snat44det-h1-p1-s1-ndrpdr
| | [Tags] | 64B | 2C
| | frame_size=${64} | phy_cores=${2}
-| 64B-4c-ethip4udp-ip4base-nat44-ei-ndrpdr
+| 64B-4c-ethip4udp-snat44det-h1-p1-s1-ndrpdr
| | [Tags] | 64B | 4C
| | frame_size=${64} | phy_cores=${4}
-| 1518B-1c-ethip4udp-ip4base-nat44-ei-ndrpdr
+| 1518B-1c-ethip4udp-snat44det-h1-p1-s1-ndrpdr
| | [Tags] | 1518B | 1C
| | frame_size=${1518} | phy_cores=${1}
-| 1518B-2c-ethip4udp-ip4base-nat44-ei-ndrpdr
+| 1518B-2c-ethip4udp-snat44det-h1-p1-s1-ndrpdr
| | [Tags] | 1518B | 2C
| | frame_size=${1518} | phy_cores=${2}
-| 1518B-4c-ethip4udp-ip4base-nat44-ei-ndrpdr
+| 1518B-4c-ethip4udp-snat44det-h1-p1-s1-ndrpdr
| | [Tags] | 1518B | 4C
| | frame_size=${1518} | phy_cores=${4}
-| 9000B-1c-ethip4udp-ip4base-nat44-ei-ndrpdr
+| 9000B-1c-ethip4udp-snat44det-h1-p1-s1-ndrpdr
| | [Tags] | 9000B | 1C
| | frame_size=${9000} | phy_cores=${1}
-| 9000B-2c-ethip4udp-ip4base-nat44-ei-ndrpdr
+| 9000B-2c-ethip4udp-snat44det-h1-p1-s1-ndrpdr
| | [Tags] | 9000B | 2C
| | frame_size=${9000} | phy_cores=${2}
-| 9000B-4c-ethip4udp-ip4base-nat44-ei-ndrpdr
+| 9000B-4c-ethip4udp-snat44det-h1-p1-s1-ndrpdr
| | [Tags] | 9000B | 4C
| | frame_size=${9000} | phy_cores=${4}
-| IMIX-1c-ethip4udp-ip4base-nat44-ei-ndrpdr
+| IMIX-1c-ethip4udp-snat44det-h1-p1-s1-ndrpdr
| | [Tags] | IMIX | 1C
| | frame_size=IMIX_v4_1 | phy_cores=${1}
-| IMIX-2c-ethip4udp-ip4base-nat44-ei-ndrpdr
+| IMIX-2c-ethip4udp-snat44det-h1-p1-s1-ndrpdr
| | [Tags] | IMIX | 2C
| | frame_size=IMIX_v4_1 | phy_cores=${2}
-| IMIX-4c-ethip4udp-ip4base-nat44-ei-ndrpdr
+| IMIX-4c-ethip4udp-snat44det-h1-p1-s1-ndrpdr
| | [Tags] | IMIX | 4C
| | frame_size=IMIX_v4_1 | phy_cores=${4}
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | NAT44_DETERMINISTIC
| ... | SRC_USER_1 | BASE | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4base-udpsrcscale63-nat44-ei
+| ... | ethip4udp-snat44det-h1-p63-s63
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | nat
+| Test Teardown | Tear down test | performance | det44
|
| Test Template | Local Template
|
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
+| @{plugins_to_enable}= | dpdk_plugin.so | det44_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| | Given Set Max Rate And Jumbo
| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs | nat_mode=${nat_mode}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
-| 64B-1c-ethip4udp-ip4base-udpsrcscale63-nat44-ei-ndrpdr
+| 64B-1c-ethip4udp-snat44det-h1-p63-s63-ndrpdr
| | [Tags] | 64B | 1C
| | frame_size=${64} | phy_cores=${1}
-| 64B-2c-ethip4udp-ip4base-udpsrcscale63-nat44-ei-ndrpdr
+| 64B-2c-ethip4udp-snat44det-h1-p63-s63-ndrpdr
| | [Tags] | 64B | 2C
| | frame_size=${64} | phy_cores=${2}
-| 64B-4c-ethip4udp-ip4base-udpsrcscale63-nat44-ei-ndrpdr
+| 64B-4c-ethip4udp-snat44det-h1-p63-s63-ndrpdr
| | [Tags] | 64B | 4C
| | frame_size=${64} | phy_cores=${4}
-| 1518B-1c-ethip4udp-ip4base-udpsrcscale63-nat44-ei-ndrpdr
+| 1518B-1c-ethip4udp-snat44det-h1-p63-s63-ndrpdr
| | [Tags] | 1518B | 1C
| | frame_size=${1518} | phy_cores=${1}
-| 1518B-2c-ethip4udp-ip4base-udpsrcscale63-nat44-ei-ndrpdr
+| 1518B-2c-ethip4udp-snat44det-h1-p63-s63-ndrpdr
| | [Tags] | 1518B | 2C
| | frame_size=${1518} | phy_cores=${2}
-| 1518B-4c-ethip4udp-ip4base-udpsrcscale63-nat44-ei-ndrpdr
+| 1518B-4c-ethip4udp-snat44det-h1-p63-s63-ndrpdr
| | [Tags] | 1518B | 4C
| | frame_size=${1518} | phy_cores=${4}
-| 9000B-1c-ethip4udp-ip4base-udpsrcscale63-nat44-ei-ndrpdr
+| 9000B-1c-ethip4udp-snat44det-h1-p63-s63-ndrpdr
| | [Tags] | 9000B | 1C
| | frame_size=${9000} | phy_cores=${1}
-| 9000B-2c-ethip4udp-ip4base-udpsrcscale63-nat44-ei-ndrpdr
+| 9000B-2c-ethip4udp-snat44det-h1-p63-s63-ndrpdr
| | [Tags] | 9000B | 2C
| | frame_size=${9000} | phy_cores=${2}
-| 9000B-4c-ethip4udp-ip4base-udpsrcscale63-nat44-ei-ndrpdr
+| 9000B-4c-ethip4udp-snat44det-h1-p63-s63-ndrpdr
| | [Tags] | 9000B | 4C
| | frame_size=${9000} | phy_cores=${4}
-| IMIX-1c-ethip4udp-ip4base-udpsrcscale63-nat44-ei-ndrpdr
+| IMIX-1c-ethip4udp-snat44det-h1-p63-s63-ndrpdr
| | [Tags] | IMIX | 1C
| | frame_size=IMIX_v4_1 | phy_cores=${1}
-| IMIX-2c-ethip4udp-ip4base-udpsrcscale63-nat44-ei-ndrpdr
+| IMIX-2c-ethip4udp-snat44det-h1-p63-s63-ndrpdr
| | [Tags] | IMIX | 2C
| | frame_size=IMIX_v4_1 | phy_cores=${2}
-| IMIX-4c-ethip4udp-ip4base-udpsrcscale63-nat44-ei-ndrpdr
+| IMIX-4c-ethip4udp-snat44det-h1-p63-s63-ndrpdr
| | [Tags] | IMIX | 4C
| | frame_size=IMIX_v4_1 | phy_cores=${4}
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | NAT44_DETERMINISTIC
| ... | SCALE | DRV_VFIO_PCI
| ... | SRC_USER_1024 | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4scale1024-udpsrcscale63-nat44-ei
+| ... | ethip4udp-snat44det-h1024-p63-s64512
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | nat
+| Test Teardown | Tear down test | performance | det44
|
| Test Template | Local Template
|
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
+| @{plugins_to_enable}= | dpdk_plugin.so | det44_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| | Given Set Max Rate And Jumbo
| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs | nat_mode=${nat_mode}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
-| 64B-1c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ei-ndrpdr
+| 64B-1c-ethip4udp-snat44det-h1024-p63-s64512-ndrpdr
| | [Tags] | 64B | 1C
| | frame_size=${64} | phy_cores=${1}
-| 64B-2c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ei-ndrpdr
+| 64B-2c-ethip4udp-snat44det-h1024-p63-s64512-ndrpdr
| | [Tags] | 64B | 2C
| | frame_size=${64} | phy_cores=${2}
-| 64B-4c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ei-ndrpdr
+| 64B-4c-ethip4udp-snat44det-h1024-p63-s64512-ndrpdr
| | [Tags] | 64B | 4C
| | frame_size=${64} | phy_cores=${4}
-| 1518B-1c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ei-ndrpdr
+| 1518B-1c-ethip4udp-snat44det-h1024-p63-s64512-ndrpdr
| | [Tags] | 1518B | 1C
| | frame_size=${1518} | phy_cores=${1}
-| 1518B-2c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ei-ndrpdr
+| 1518B-2c-ethip4udp-snat44det-h1024-p63-s64512-ndrpdr
| | [Tags] | 1518B | 2C
| | frame_size=${1518} | phy_cores=${2}
-| 1518B-4c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ei-ndrpdr
+| 1518B-4c-ethip4udp-snat44det-h1024-p63-s64512-ndrpdr
| | [Tags] | 1518B | 4C
| | frame_size=${1518} | phy_cores=${4}
-| 9000B-1c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ei-ndrpdr
+| 9000B-1c-ethip4udp-snat44det-h1024-p63-s64512-ndrpdr
| | [Tags] | 9000B | 1C
| | frame_size=${9000} | phy_cores=${1}
-| 9000B-2c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ei-ndrpdr
+| 9000B-2c-ethip4udp-snat44det-h1024-p63-s64512-ndrpdr
| | [Tags] | 9000B | 2C
| | frame_size=${9000} | phy_cores=${2}
-| 9000B-4c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ei-ndrpdr
+| 9000B-4c-ethip4udp-snat44det-h1024-p63-s64512-ndrpdr
| | [Tags] | 9000B | 4C
| | frame_size=${9000} | phy_cores=${4}
-| IMIX-1c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ei-ndrpdr
+| IMIX-1c-ethip4udp-snat44det-h1024-p63-s64512-ndrpdr
| | [Tags] | IMIX | 1C
| | frame_size=IMIX_v4_1 | phy_cores=${1}
-| IMIX-2c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ei-ndrpdr
+| IMIX-2c-ethip4udp-snat44det-h1024-p63-s64512-ndrpdr
| | [Tags] | IMIX | 2C
| | frame_size=IMIX_v4_1 | phy_cores=${2}
-| IMIX-4c-ethip4udp-ip4scale1024-udpsrcscale63-nat44-ei-ndrpdr
+| IMIX-4c-ethip4udp-snat44det-h1024-p63-s64512-ndrpdr
| | [Tags] | IMIX | 4C
| | frame_size=IMIX_v4_1 | phy_cores=${4}
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | NAT44_DETERMINISTIC
| ... | SRC_USER_16384 | SCALE | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4scale16384-udpsrcscale63-nat44-ei
+| ... | ethip4udp-snat44det-h16384-p63-s1032192
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | nat
+| Test Teardown | Tear down test | performance | det44
|
| Test Template | Local Template
|
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
+| @{plugins_to_enable}= | dpdk_plugin.so | det44_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| | Given Set Max Rate And Jumbo
| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs | nat_mode=${nat_mode}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
-| 64B-1c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ei-ndrpdr
+| 64B-1c-ethip4udp-snat44det-h16384-p63-s1032192-ndrpdr
| | [Tags] | 64B | 1C
| | frame_size=${64} | phy_cores=${1}
-| 64B-2c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ei-ndrpdr
+| 64B-2c-ethip4udp-snat44det-h16384-p63-s1032192-ndrpdr
| | [Tags] | 64B | 2C
| | frame_size=${64} | phy_cores=${2}
-| 64B-4c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ei-ndrpdr
+| 64B-4c-ethip4udp-snat44det-h16384-p63-s1032192-ndrpdr
| | [Tags] | 64B | 4C
| | frame_size=${64} | phy_cores=${4}
-| 1518B-1c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ei-ndrpdr
+| 1518B-1c-ethip4udp-snat44det-h16384-p63-s1032192-ndrpdr
| | [Tags] | 1518B | 1C
| | frame_size=${1518} | phy_cores=${1}
-| 1518B-2c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ei-ndrpdr
+| 1518B-2c-ethip4udp-snat44det-h16384-p63-s1032192-ndrpdr
| | [Tags] | 1518B | 2C
| | frame_size=${1518} | phy_cores=${2}
-| 1518B-4c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ei-ndrpdr
+| 1518B-4c-ethip4udp-snat44det-h16384-p63-s1032192-ndrpdr
| | [Tags] | 1518B | 4C
| | frame_size=${1518} | phy_cores=${4}
-| 9000B-1c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ei-ndrpdr
+| 9000B-1c-ethip4udp-snat44det-h16384-p63-s1032192-ndrpdr
| | [Tags] | 9000B | 1C
| | frame_size=${9000} | phy_cores=${1}
-| 9000B-2c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ei-ndrpdr
+| 9000B-2c-ethip4udp-snat44det-h16384-p63-s1032192-ndrpdr
| | [Tags] | 9000B | 2C
| | frame_size=${9000} | phy_cores=${2}
-| 9000B-4c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ei-ndrpdr
+| 9000B-4c-ethip4udp-snat44det-h16384-p63-s1032192-ndrpdr
| | [Tags] | 9000B | 4C
| | frame_size=${9000} | phy_cores=${4}
-| IMIX-1c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ei-ndrpdr
+| IMIX-1c-ethip4udp-snat44det-h16384-p63-s1032192-ndrpdr
| | [Tags] | IMIX | 1C
| | frame_size=IMIX_v4_1 | phy_cores=${1}
-| IMIX-2c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ei-ndrpdr
+| IMIX-2c-ethip4udp-snat44det-h16384-p63-s1032192-ndrpdr
| | [Tags] | IMIX | 2C
| | frame_size=IMIX_v4_1 | phy_cores=${2}
-| IMIX-4c-ethip4udp-ip4scale16384-udpsrcscale63-nat44-ei-ndrpdr
+| IMIX-4c-ethip4udp-snat44det-h16384-p63-s1032192-ndrpdr
| | [Tags] | IMIX | 4C
| | frame_size=IMIX_v4_1 | phy_cores=${4}
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | NAT44_DETERMINISTIC
| ... | SRC_USER_262144 | SCALE | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4scale262144-udpsrcscale63-nat44-ei
+| ... | ethip4udp-snat44det-h262144-p63-s16515072
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | nat
+| Test Teardown | Tear down test | performance | det44
|
| Test Template | Local Template
|
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
+| @{plugins_to_enable}= | dpdk_plugin.so | det44_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| | Given Set Max Rate And Jumbo
| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs | nat_mode=${nat_mode}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
-| 64B-1c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ei-ndrpdr
+| 64B-1c-ethip4udp-snat44det-h262144-p63-s16515072-ndrpdr
| | [Tags] | 64B | 1C
| | frame_size=${64} | phy_cores=${1}
-| 64B-2c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ei-ndrpdr
+| 64B-2c-ethip4udp-snat44det-h262144-p63-s16515072-ndrpdr
| | [Tags] | 64B | 2C
| | frame_size=${64} | phy_cores=${2}
-| 64B-4c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ei-ndrpdr
+| 64B-4c-ethip4udp-snat44det-h262144-p63-s16515072-ndrpdr
| | [Tags] | 64B | 4C
| | frame_size=${64} | phy_cores=${4}
-| 1518B-1c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ei-ndrpdr
+| 1518B-1c-ethip4udp-snat44det-h262144-p63-s16515072-ndrpdr
| | [Tags] | 1518B | 1C
| | frame_size=${1518} | phy_cores=${1}
-| 1518B-2c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ei-ndrpdr
+| 1518B-2c-ethip4udp-snat44det-h262144-p63-s16515072-ndrpdr
| | [Tags] | 1518B | 2C
| | frame_size=${1518} | phy_cores=${2}
-| 1518B-4c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ei-ndrpdr
+| 1518B-4c-ethip4udp-snat44det-h262144-p63-s16515072-ndrpdr
| | [Tags] | 1518B | 4C
| | frame_size=${1518} | phy_cores=${4}
-| 9000B-1c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ei-ndrpdr
+| 9000B-1c-ethip4udp-snat44det-h262144-p63-s16515072-ndrpdr
| | [Tags] | 9000B | 1C
| | frame_size=${9000} | phy_cores=${1}
-| 9000B-2c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ei-ndrpdr
+| 9000B-2c-ethip4udp-snat44det-h262144-p63-s16515072-ndrpdr
| | [Tags] | 9000B | 2C
| | frame_size=${9000} | phy_cores=${2}
-| 9000B-4c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ei-ndrpdr
+| 9000B-4c-ethip4udp-snat44det-h262144-p63-s16515072-ndrpdr
| | [Tags] | 9000B | 4C
| | frame_size=${9000} | phy_cores=${4}
-| IMIX-1c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ei-ndrpdr
+| IMIX-1c-ethip4udp-snat44det-h262144-p63-s16515072-ndrpdr
| | [Tags] | IMIX | 1C
| | frame_size=IMIX_v4_1 | phy_cores=${1}
-| IMIX-2c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ei-ndrpdr
+| IMIX-2c-ethip4udp-snat44det-h262144-p63-s16515072-ndrpdr
| | [Tags] | IMIX | 2C
| | frame_size=IMIX_v4_1 | phy_cores=${2}
-| IMIX-4c-ethip4udp-ip4scale262144-udpsrcscale63-nat44-ei-ndrpdr
+| IMIX-4c-ethip4udp-snat44det-h262144-p63-s16515072-ndrpdr
| | [Tags] | IMIX | 4C
| | frame_size=IMIX_v4_1 | phy_cores=${4}
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | NAT44_DETERMINISTIC
| ... | SRC_USER_4096 | SCALE | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4scale4096-udpsrcscale63-nat44-ei
+| ... | ethip4udp-snat44det-h4096-p63-s258048
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | nat
+| Test Teardown | Tear down test | performance | det44
|
| Test Template | Local Template
|
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
+| @{plugins_to_enable}= | dpdk_plugin.so | det44_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| | Given Set Max Rate And Jumbo
| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs | nat_mode=${nat_mode}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
-| 64B-1c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ei-ndrpdr
+| 64B-1c-ethip4udp-snat44det-h4096-p63-s258048-ndrpdr
| | [Tags] | 64B | 1C
| | frame_size=${64} | phy_cores=${1}
-| 64B-2c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ei-ndrpdr
+| 64B-2c-ethip4udp-snat44det-h4096-p63-s258048-ndrpdr
| | [Tags] | 64B | 2C
| | frame_size=${64} | phy_cores=${2}
-| 64B-4c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ei-ndrpdr
+| 64B-4c-ethip4udp-snat44det-h4096-p63-s258048-ndrpdr
| | [Tags] | 64B | 4C
| | frame_size=${64} | phy_cores=${4}
-| 1518B-1c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ei-ndrpdr
+| 1518B-1c-ethip4udp-snat44det-h4096-p63-s258048-ndrpdr
| | [Tags] | 1518B | 1C
| | frame_size=${1518} | phy_cores=${1}
-| 1518B-2c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ei-ndrpdr
+| 1518B-2c-ethip4udp-snat44det-h4096-p63-s258048-ndrpdr
| | [Tags] | 1518B | 2C
| | frame_size=${1518} | phy_cores=${2}
-| 1518B-4c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ei-ndrpdr
+| 1518B-4c-ethip4udp-snat44det-h4096-p63-s258048-ndrpdr
| | [Tags] | 1518B | 4C
| | frame_size=${1518} | phy_cores=${4}
-| 9000B-1c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ei-ndrpdr
+| 9000B-1c-ethip4udp-snat44det-h4096-p63-s258048-ndrpdr
| | [Tags] | 9000B | 1C
| | frame_size=${9000} | phy_cores=${1}
-| 9000B-2c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ei-ndrpdr
+| 9000B-2c-ethip4udp-snat44det-h4096-p63-s258048-ndrpdr
| | [Tags] | 9000B | 2C
| | frame_size=${9000} | phy_cores=${2}
-| 9000B-4c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ei-ndrpdr
+| 9000B-4c-ethip4udp-snat44det-h4096-p63-s258048-ndrpdr
| | [Tags] | 9000B | 4C
| | frame_size=${9000} | phy_cores=${4}
-| IMIX-1c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ei-ndrpdr
+| IMIX-1c-ethip4udp-snat44det-h4096-p63-s258048-ndrpdr
| | [Tags] | IMIX | 1C
| | frame_size=IMIX_v4_1 | phy_cores=${1}
-| IMIX-2c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ei-ndrpdr
+| IMIX-2c-ethip4udp-snat44det-h4096-p63-s258048-ndrpdr
| | [Tags] | IMIX | 2C
| | frame_size=IMIX_v4_1 | phy_cores=${2}
-| IMIX-4c-ethip4udp-ip4scale4096-udpsrcscale63-nat44-ei-ndrpdr
+| IMIX-4c-ethip4udp-snat44det-h4096-p63-s258048-ndrpdr
| | [Tags] | IMIX | 4C
| | frame_size=IMIX_v4_1 | phy_cores=${4}
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | NAT44_DETERMINISTIC
| ... | SRC_USER_65536 | SCALE | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4udp-ip4scale65536-udpsrcscale63-nat44-ei
+| ... | ethip4udp-snat44det-h65536-p63-s4128758
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | nat
+| Test Teardown | Tear down test | performance | det44
|
| Test Template | Local Template
|
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
+| @{plugins_to_enable}= | dpdk_plugin.so | det44_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| | Given Set Max Rate And Jumbo
| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
| | And Pre-initialize layer driver | ${nic_driver}
-| | And Add NAT to all DUTs | nat_mode=${nat_mode}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
-| 64B-1c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ei-ndrpdr
+| 64B-1c-ethip4udp-snat44det-h65536-p63-s4128758-ndrpdr
| | [Tags] | 64B | 1C
| | frame_size=${64} | phy_cores=${1}
-| 64B-2c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ei-ndrpdr
+| 64B-2c-ethip4udp-snat44det-h65536-p63-s4128758-ndrpdr
| | [Tags] | 64B | 2C
| | frame_size=${64} | phy_cores=${2}
-| 64B-4c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ei-ndrpdr
+| 64B-4c-ethip4udp-snat44det-h65536-p63-s4128758-ndrpdr
| | [Tags] | 64B | 4C
| | frame_size=${64} | phy_cores=${4}
-| 1518B-1c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ei-ndrpdr
+| 1518B-1c-ethip4udp-snat44det-h65536-p63-s4128758-ndrpdr
| | [Tags] | 1518B | 1C
| | frame_size=${1518} | phy_cores=${1}
-| 1518B-2c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ei-ndrpdr
+| 1518B-2c-ethip4udp-snat44det-h65536-p63-s4128758-ndrpdr
| | [Tags] | 1518B | 2C
| | frame_size=${1518} | phy_cores=${2}
-| 1518B-4c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ei-ndrpdr
+| 1518B-4c-ethip4udp-snat44det-h65536-p63-s4128758-ndrpdr
| | [Tags] | 1518B | 4C
| | frame_size=${1518} | phy_cores=${4}
-| 9000B-1c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ei-ndrpdr
+| 9000B-1c-ethip4udp-snat44det-h65536-p63-s4128758-ndrpdr
| | [Tags] | 9000B | 1C
| | frame_size=${9000} | phy_cores=${1}
-| 9000B-2c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ei-ndrpdr
+| 9000B-2c-ethip4udp-snat44det-h65536-p63-s4128758-ndrpdr
| | [Tags] | 9000B | 2C
| | frame_size=${9000} | phy_cores=${2}
-| 9000B-4c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ei-ndrpdr
+| 9000B-4c-ethip4udp-snat44det-h65536-p63-s4128758-ndrpdr
| | [Tags] | 9000B | 4C
| | frame_size=${9000} | phy_cores=${4}
-| IMIX-1c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ei-ndrpdr
+| IMIX-1c-ethip4udp-snat44det-h65536-p63-s4128758-ndrpdr
| | [Tags] | IMIX | 1C
| | frame_size=IMIX_v4_1 | phy_cores=${1}
-| IMIX-2c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ei-ndrpdr
+| IMIX-2c-ethip4udp-snat44det-h65536-p63-s4128758-ndrpdr
| | [Tags] | IMIX | 2C
| | frame_size=IMIX_v4_1 | phy_cores=${2}
-| IMIX-4c-ethip4udp-ip4scale65536-udpsrcscale63-nat44-ei-ndrpdr
+| IMIX-4c-ethip4udp-snat44det-h65536-p63-s4128758-ndrpdr
| | [Tags] | IMIX | 4C
| | frame_size=IMIX_v4_1 | phy_cores=${4}
Code Review / csit.git / commitdiff