Optimize Qemu installation to speed up vhost tests

Currently Qemu is being installed if there is a change of qsz parameter
between tests/suites. Qemu is installed always into the same directory. This
patch changes the default behavior to install qemu over and install
pathced version to separate directory. It also disables force install.

Change-Id: I0d7493a02b026a6ae4a5ea8bacf54656de9db567
Signed-off-by: Peter Mikus <pmikus@cisco.com>

diff --git a/resources/libraries/bash/config/config b/resources/libraries/bash/config/config
index 2b71edc..42f23bd 100644 (file)
--- a/resources/libraries/bash/config/config
+++ b/resources/libraries/bash/config/config
@@ -1,5 +1,8 @@
-QEMU_INSTALL_DIR=/opt
+QEMU_INSTALL_DIR=/opt/qemu-2.5.0
 QEMU_INSTALL_VERSION=qemu-2.5.0
+QEMU_PATCH=false
+QEMU_FORCE_INSTALL=false
+QEMU_TARGET_LIST=x86_64-softmmu
 
 DPDK_INSTALL_DIR=/opt
-DPDK_INSTALL_VERSION=dpdk-17.11
\ No newline at end of file
+DPDK_INSTALL_VERSION=dpdk-17.11

diff --git a/resources/libraries/bash/config/defaults b/resources/libraries/bash/config/defaults
index 1547452..a70add1 100644 (file)
--- a/resources/libraries/bash/config/defaults
+++ b/resources/libraries/bash/config/defaults
@@ -2,11 +2,14 @@
 
 typeset -A cfg
 cfg=( # set default values in config array
-    [QEMU_INSTALL_DIR]="/opt"
+    [QEMU_INSTALL_DIR]="/opt/qemu-2.5.0"
     [QEMU_INSTALL_VERSION]="qemu-2.5.0"
+    [QEMU_PATCH]=false
+    [QEMU_FORCE_INSTALL]=false
+    [QEMU_TARGET_LIST]=x86_64-softmmu
     [DPDK_INSTALL_DIR]=/opt
     [DPDK_INSTALL_VERSION]=dpdk-17.11
     [K8S_CALICO]="${SCRIPT_DIR}/../../templates/kubernetes/calico_v2.6.3.yaml"
     [K8S_CONTIV_VPP]="https://raw.githubusercontent.com/contiv/vpp/master/k8s/contiv-vpp.yaml"
     [K8S_CSIT]="${SCRIPT_DIR}/../../templates/kubernetes/csit.yaml"
-)
\ No newline at end of file
+)

diff --git a/resources/libraries/bash/qemu_build.sh b/resources/libraries/bash/qemu_build.sh
index 57520a9..4638ec1 100755 (executable)
--- a/resources/libraries/bash/qemu_build.sh
+++ b/resources/libraries/bash/qemu_build.sh
@@ -1,5 +1,5 @@
 #!/bin/bash
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2018 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -12,81 +12,47 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-QEMU_VERSION="qemu-2.5.0"
-QEMU_DOWNLOAD_REPO="http://download.qemu-project.org/"
-QEMU_DOWNLOAD_PACKAGE="${QEMU_VERSION}.tar.xz"
-QEMU_PACKAGE_URL="${QEMU_DOWNLOAD_REPO}${QEMU_DOWNLOAD_PACKAGE}"
-QEMU_INSTALL_DIR="/opt/${QEMU_VERSION}"
+set -x
+
 SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
-TARGET_LIST="x86_64-softmmu"
 
+# Include
+source ${SCRIPT_DIR}/config/defaults
+source ${SCRIPT_DIR}/shell/qemu_utils.sh
+
+# Read configuration
+while read line
+do
+    if echo $line | grep -F = &>/dev/null
+    then
+        varname=$(echo "$line" | cut -d '=' -f 1)
+        cfg[$varname]=$(echo "$line" | cut -d '=' -f 2-)
+    fi
+done < ${SCRIPT_DIR}/config/config
+
+# Read parameters
 for i in "$@"; do
     case $i in
         --version=*)
-            QEMU_VERSION="${i#*=}"
+            cfg['QEMU_INSTALL_VERSION']="${i#*=}"
             shift ;;
         --directory=*)
-            QEMU_INSTALL_DIR="${i#*=}"
+            cfg['QEMU_INSTALL_DIR']="${i#*=}"
             shift ;;
         --patch)
-            PATCH=1
+            cfg['QEMU_PATCH']=true
             shift ;;
         --force)
-            FORCE=1
+            cfg['QEMU_FORCE_INSTALL']=true
             shift ;;
         --target-list)
-            TARGET_LIST="${i#*=}"
+            cfg['QEMU_TARGET_LIST']="${i#*=}"
             shift ;;
         *)
             ;;
     esac
 done
 
-if test "$(id -u)" -ne 0
-then
-    echo "Please use root or sudo to be able to install into: ${QEMU_INSTALL_DIR}"
-    exit 1
-fi
-
-WORKING_DIR=$(mktemp -d) || \
-    { echo "Failed to create temporary working dir"; exit 1; }
-trap "rm -r ${WORKING_DIR}" EXIT
-
-if [ $FORCE ]
-then
-    rm -rf ${QEMU_INSTALL_DIR}
-else
-    test -d ${QEMU_INSTALL_DIR} && \
-        { echo "Qemu already installed: ${QEMU_INSTALL_DIR}"; exit 0; }
-fi
-
-# Download QEMU source code if no local copy exists
-if [ ! -f /opt/${QEMU_DOWNLOAD_PACKAGE} ]; then
-    wget -P /opt -q ${QEMU_PACKAGE_URL} || \
-        { echo "Failed to download ${QEMU_VERSION}"; exit 1; }
-fi
-
-# Extract archive into temp directory
-tar --strip-components 1 -xf /opt/${QEMU_DOWNLOAD_PACKAGE} -C ${WORKING_DIR} || \
-    { echo "Failed to extract ${QEMU_VERSION}.tar.xz"; exit 1; }
-
-cd ${WORKING_DIR}
-mkdir ${QEMU_INSTALL_DIR} || \
-    { echo "Failed to create ${QEMU_INSTALL_DIR}"; exit 1; }
-
-# Apply additional patches
-if [ $PATCH ]
-then
-    chmod +x ${SCRIPT_DIR}/qemu_patches/${QEMU_VERSION}/*
-    run-parts --verbose --report  ${SCRIPT_DIR}/qemu_patches/${QEMU_VERSION}
-fi
-
-# Build
-./configure --target-list=${TARGET_LIST} --prefix=${QEMU_INSTALL_DIR} || \
-    { echo "Failed to configure ${QEMU_VERSION}"; exit 1; }
-make -j`nproc` || \
-    { echo "Failed to compile ${QEMU_VERSION}"; exit 1; }
-make install || \
-    { echo "Failed to install ${QEMU_VERSION}"; exit 1; }
-
-echo QEMU ${QEMU_VERSION} ready
+# Install qemu
+qemu_utils.qemu_install ${cfg[QEMU_INSTALL_DIR]} ${cfg[QEMU_INSTALL_VERSION]} \
+    ${cfg[QEMU_PATCH]} ${cfg[QEMU_FORCE_INSTALL]} ${cfg[QEMU_TARGET_LIST]}

diff --git a/resources/libraries/bash/shell/qemu_utils.sh b/resources/libraries/bash/shell/qemu_utils.sh
index 510d9f2..cabf93d 100644 (file)
--- a/resources/libraries/bash/shell/qemu_utils.sh
+++ b/resources/libraries/bash/shell/qemu_utils.sh
@@ -15,47 +15,47 @@
 function qemu_utils.qemu_delete {
     # Deletes the QEMU directory
     # QEMU install directory
-    qemu_install_dir=$1
-    # QEMU install version
-    qemu_install_ver=$2
+    local qemu_install_dir=$1
 
-    [ -d ${qemu_install_dir}/${qemu_install_ver} ] && \
-        sudo rm -r ${qemu_install_dir}/${qemu_install_ver} && \
-        echo "${qemu_install_dir}/${qemu_install_ver} removed"
+    [ -d ${qemu_install_dir} ] && \
+        sudo rm -r ${qemu_install_dir} && \
+        echo "${qemu_install_dir} removed"
 }
 
 function qemu_utils.qemu_install {
     # Downloads and installs QEMU
     # QEMU install directory
-    qemu_install_dir=$1
+    local qemu_install_dir=$1
     # QEMU install version
-    qemu_install_ver=$2
+    local qemu_install_ver=$2
     # QEMU patch
-    qemu_patch=$3
+    local qemu_patch=${3:-false}
     # Force install (if true then remove previous installation; default false)
-    force_install=${4:-false}
+    local force_install=${4:-false}
     # QEMU repo URL
-    qemu_package_url="http://download.qemu-project.org/${qemu_install_ver}.tar.xz"
+    local qemu_package_url="http://download.qemu-project.org/${qemu_install_ver}.tar.xz"
+    # QEMU target arch
+    local qemu_target_list=${5:-x86_64-softmmu}
 
-    if [ $force_install ]; then
+    if [ $force_install = true ]; then
         # Cleanup QEMU dir
-        qemu_utils.qemu_delete $qemu_install_dir $qemu_install_ver
+        qemu_utils.qemu_delete $qemu_install_dir
     else
         # Test if QEMU was installed previously
         test -d $qemu_install_dir && \
             { echo "Qemu already installed: $qemu_install_dir"; exit 0; }
     fi
 
-    tmp_dir=$(mktemp -d) || \
+    local tmp_dir=$(mktemp -d) || \
         { echo "Failed to create temporary working dir"; exit 1; }
-    trap "rm -r ${tmp_dir}" EXIT
+    trap "sudo rm -r ${tmp_dir}" EXIT
 
     # Download QEMU source code if no local copy exists
     if [ ! -f /opt/${qemu_install_ver}.tar.xz ]; then
         sudo wget -e use_proxy=yes -P /opt -q ${qemu_package_url} || \
             { echo "Failed to download ${qemu_install_ver}"; exit 1; }
     fi
-    tar --strip-components 1 -xvJf ${tmp_dir}/${qemu_install_ver}.tar.xz -C ${tmp_dir} && \
+    tar --strip-components 1 -xf /opt/${qemu_install_ver}.tar.xz -C ${tmp_dir} || \
         { echo "Failed to exctract ${qemu_install_ver}.tar.xz"; exit 1; }
 
     cd ${tmp_dir}
@@ -63,14 +63,14 @@ function qemu_utils.qemu_install {
         { echo "Failed to create ${qemu_install_dir}"; exit 1; }
 
     # Apply additional patches
-    if [ $qemu_patch ]
+    if [ $qemu_patch = true ]
     then
         chmod +x ${SCRIPT_DIR}/qemu_patches/${qemu_install_ver}/*
         run-parts --verbose --report  ${SCRIPT_DIR}/qemu_patches/${qemu_install_ver}
     fi
 
     # Build
-    sudo ./configure --target-list=x86_64-softmmu --prefix=${qemu_install_dir}/${qemu_install_ver} || \
+    sudo ./configure --target-list=${qemu_target_list} --prefix=${qemu_install_dir} || \
         { echo "Failed to configure ${qemu_install_ver}"; exit 1; }
     sudo make -j`nproc` || \
         { echo "Failed to compile ${qemu_install_ver}"; exit 1; }
@@ -78,4 +78,4 @@ function qemu_utils.qemu_install {
         { echo "Failed to install ${qemu_install_ver}"; exit 1; }
 
     echo "QEMU ${qemu_install_ver} ready"
-}
\ No newline at end of file
+}

diff --git a/resources/libraries/python/QemuUtils.py b/resources/libraries/python/QemuUtils.py
index a8c26d6..42ccb8c 100644 (file)
--- a/resources/libraries/python/QemuUtils.py
+++ b/resources/libraries/python/QemuUtils.py
@@ -688,6 +688,10 @@ class QemuUtils(object):
         ssh.connect(node)
 
         directory = ' --directory={0}'.format(Constants.QEMU_INSTALL_DIR)
+        if apply_patch:
+            directory += '-patch'
+        else:
+            directory += '-base'
         version = ' --version={0}'.format(Constants.QEMU_INSTALL_VERSION)
         force = ' --force' if force_install else ''
         patch = ' --patch' if apply_patch else ''

diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot
index 61bc4bd..e544cdd 100644 (file)
--- a/resources/libraries/robot/performance/performance_configuration.robot
+++ b/resources/libraries/robot/performance/performance_configuration.robot
@@ -1465,8 +1465,11 @@
 | | ... | jumbo_frames=${jumbo_frames}
 | | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False}
 | | ... | ${True}
-| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node}
-| | ... | force_install=${True} | apply_patch=${apply_patch}
+| | ${perf_qemu_path}= | Set Variable If | ${apply_patch}
+| | ... | ${perf_qemu_path}-patch/bin/
+| | ... | ${perf_qemu_path}-base/bin/
+| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node}
+| | ... | apply_patch=${apply_patch}
 | | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path}
 | | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node}
 | | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1
@@ -1516,8 +1519,6 @@
 | | | ... | skip=${skip_cpus} | count=${vm_cpus} | qemu_id=${number}
 | | | ... | jumbo_frames=${jumbo_frames}
 | | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM${number} | ${vm2}
-| | | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | | ... | ${True}
 
 | Configure guest VM with dpdk-testpmd using SMT connected via vhost-user
 | | [Documentation]
@@ -1558,8 +1559,11 @@
 | | ... | jumbo_frames=${jumbo_frames}
 | | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False}
 | | ... | ${True}
-| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node}
-| | ... | force_install=${True} | apply_patch=${apply_patch}
+| | ${perf_qemu_path}= | Set Variable If | ${apply_patch}
+| | ... | ${perf_qemu_path}-patch/bin/
+| | ... | ${perf_qemu_path}-base/bin/
+| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node}
+| | ... | apply_patch=${apply_patch}
 | | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path}
 | | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node}
 | | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1
@@ -1629,8 +1633,11 @@
 | | ... | jumbo_frames=${jumbo_frames}
 | | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False}
 | | ... | ${True}
-| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node}
-| | ... | force_install=${True} | apply_patch=${apply_patch}
+| | ${perf_qemu_path}= | Set Variable If | ${apply_patch}
+| | ... | ${perf_qemu_path}-patch/bin/
+| | ... | ${perf_qemu_path}-base/bin/
+| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node}
+| | ... | apply_patch=${apply_patch}
 | | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path}
 | | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node}
 | | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1
@@ -1688,8 +1695,6 @@
 | | | ... | count=${vm_cpus} | qemu_id=${number}
 | | | ... | jumbo_frames=${jumbo_frames}
 | | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM${number} | ${vm2}
-| | | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | | ... | ${True}
 
 | Configure guest VM with dpdk-testpmd-mac using SMT connected via vhost-user
 | | [Documentation]
@@ -1733,8 +1738,11 @@
 | | ... | jumbo_frames=${jumbo_frames}
 | | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False}
 | | ... | ${True}
-| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node}
-| | ... | force_install=${True} | apply_patch=${apply_patch}
+| | ${perf_qemu_path}= | Set Variable If | ${apply_patch}
+| | ... | ${perf_qemu_path}-patch/bin/
+| | ... | ${perf_qemu_path}-base/bin/
+| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node}
+| | ... | apply_patch=${apply_patch}
 | | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path}
 | | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node}
 | | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1
@@ -1783,8 +1791,11 @@
 | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2}
 | | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False}
 | | ... | ${True}
-| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node}
-| | ... | force_install=${True} | apply_patch=${apply_patch}
+| | ${perf_qemu_path}= | Set Variable If | ${apply_patch}
+| | ... | ${perf_qemu_path}-patch/bin/
+| | ... | ${perf_qemu_path}-base/bin/
+| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node}
+| | ... | apply_patch=${apply_patch}
 | | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path}
 | | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node}
 | | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1
@@ -1833,8 +1844,11 @@
 | | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2}
 | | ${apply_patch}= | Set Variable If | "${perf_qemu_qsz}" == "256" | ${False}
 | | ... | ${True}
-| | Run Keyword Unless | ${qemu_built} | ${vm_name}.Build QEMU | ${dut_node}
-| | ... | force_install=${True} | apply_patch=${apply_patch}
+| | ${perf_qemu_path}= | Set Variable If | ${apply_patch}
+| | ... | ${perf_qemu_path}-patch/bin/
+| | ... | ${perf_qemu_path}-base/bin/
+| | Run Keyword If | ${qemu_build} | ${vm_name}.Build QEMU | ${dut_node}
+| | ... | apply_patch=${apply_patch}
 | | Run keyword | ${vm_name}.Qemu Set Path | ${perf_qemu_path}
 | | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node}
 | | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1

diff --git a/tests/vpp/perf/__init__.robot b/tests/vpp/perf/__init__.robot
index 742c580..5e47502 100644 (file)
--- a/tests/vpp/perf/__init__.robot
+++ b/tests/vpp/perf/__init__.robot
@@ -34,10 +34,9 @@
 | | ... | - perf_pdr_loss_acceptance - Loss acceptance treshold
 | | ... | - perf_pdr_loss_acceptance_type - Loss acceptance treshold type
 | | ... | - perf_vm_image - Guest VM disk image
-| | ... | - perf_qemu_bin - Path to QEMU binary
-| | ... | - perf_qemu_qsz - QEMU virtio queue size
+| | ... | - perf_qemu_path - Path prefix to QEMU binary
 | | ... | - use_tuned_cfs - Switch to set scheduler policy
-| | ... | - qemu_built - Information if QEMU build is already prepared
+| | ... | - qemu_build - Whether Qemu will be built
 | | ... | - pkt_trace - Switch to enable packet trace for test
 | | ... | - plugins_to_disable - List of plugins to be disabled for test
 | | ...
@@ -45,10 +44,9 @@
 | | Set Global Variable | ${perf_pdr_loss_acceptance} | 0.5
 | | Set Global Variable | ${perf_pdr_loss_acceptance_type} | percentage
 | | Set Global Variable | ${perf_vm_image} | /var/lib/vm/csit-nested-1.7.img
-| | Set Global Variable | ${perf_qemu_path} | /opt/qemu-2.5.0/bin/
-| | Set Global Variable | ${perf_qemu_qsz} | 1024
+| | Set Global Variable | ${perf_qemu_path} | /opt/qemu-2.5.0
 | | Set Global Variable | ${use_tuned_cfs} | ${False}
-| | Set Global Variable | ${qemu_built} | ${False}
+| | Set Global Variable | ${qemu_build} | ${True}
 | | Set Global Variable | ${pkt_trace} | ${False}
 | | @{plugins_to_disable}= | Create List
 | | ... | acl_plugin.so

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot
index e0762d5..987b761 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot
@@ -51,6 +51,7 @@
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 | ${subid}= | 10
 | ${tag_rewrite}= | pop-1
 # Socket names
@@ -61,7 +62,7 @@
 # X520-DA2 bandwidth limit
 | ${s_limit}= | ${10000000000}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Keywords ***
 | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm
@@ -100,8 +101,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | ... | jumbo_frames=${jumbo_frames}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Traffic should pass with maximum rate | ${perf_trial_duration}
 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
 

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
index 2cd57b8..41d5cc8 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
@@ -57,6 +57,7 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 | ${subid}= | 10
 | ${tag_rewrite}= | pop-1
 | ${vlan_overhead}= | ${4}
@@ -68,7 +69,7 @@
 | ${sock1}= | /tmp/sock-1-${bd_id1}
 | ${sock2}= | /tmp/sock-1-${bd_id2}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Test Cases ***
 | tc01-64B-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc
@@ -100,8 +101,6 @@
 | | Set To Dictionary | ${dut1_vm_refs} | DUT1_VM1 | ${vm1}
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
@@ -137,8 +136,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -174,8 +171,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -210,8 +205,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -249,8 +242,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -287,8 +278,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -324,8 +313,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -360,8 +347,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -397,8 +382,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -433,8 +416,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -472,8 +453,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -510,8 +489,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -547,8 +524,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -583,8 +558,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -620,8 +593,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -656,8 +627,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -695,8 +664,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -733,8 +700,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrchk.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrchk.robot
index 749378e..ac99167 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrchk.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrchk.robot
@@ -55,6 +55,7 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 | ${subid}= | 10
 | ${tag_rewrite}= | pop-1
 # Socket names
@@ -63,7 +64,7 @@
 | ${sock1}= | /tmp/sock-1-${bd_id1}
 | ${sock2}= | /tmp/sock-1-${bd_id2}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Keywords ***
 | Check PDR for L2 bridge domain with vhost and VM with dpdk-testpmd
@@ -98,8 +99,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Traffic should pass with partial loss | ${perf_trial_duration}
 | | ... | ${rate} | ${framesize} | ${traffic_profile}
 | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot
index db60a21..89db0c8 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot
@@ -50,6 +50,7 @@
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 | ${subid}= | 10
 | ${tag_rewrite}= | pop-1
 # Socket names
@@ -58,7 +59,7 @@
 # X520-DA2 bandwidth limit
 | ${s_limit}= | ${10000000000}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Keywords ***
 | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm
@@ -96,8 +97,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | ... | jumbo_frames=${jumbo_frames}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Traffic should pass with maximum rate | ${perf_trial_duration}
 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
 

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
index 26f3776..a85c7c0 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
@@ -56,6 +56,7 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 | ${subid}= | 10
 | ${tag_rewrite}= | pop-1
 | ${vlan_overhead}= | ${4}
@@ -65,7 +66,7 @@
 # X520-DA2 bandwidth limit
 | ${s_limit}= | ${10000000000}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Test Cases ***
 | tc01-64B-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc
@@ -97,8 +98,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -132,8 +131,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -168,8 +165,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -203,8 +198,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -241,8 +234,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -278,8 +269,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -314,8 +303,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -349,8 +336,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -385,8 +370,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -420,8 +403,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -458,8 +439,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -495,8 +474,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -531,8 +508,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -566,8 +541,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -602,8 +575,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -637,8 +608,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -675,8 +644,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -712,8 +679,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrchk.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrchk.robot
index 5629837..f05f80b 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrchk.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrchk.robot
@@ -55,13 +55,14 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 | ${subid}= | 10
 | ${tag_rewrite}= | pop-1
 # Socket names
 | ${sock1}= | /tmp/sock-1
 | ${sock2}= | /tmp/sock-2
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Keywords ***
 | Check PDR for L2XC with vhost and VM with dpdk-testpmd
@@ -95,8 +96,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Traffic should pass with partial loss | ${perf_trial_duration}
 | | ... | ${rate} | ${framesize} | ${traffic_profile}
 | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot
index fbf46b8..d5fc2e9 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot
@@ -59,16 +59,17 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 | ${avg_imix_framesize}= | ${357.833}
 # X520-DA2 bandwidth limit
-| ${s_limit} | ${10000000000}
+| ${s_limit}= | ${10000000000}
 # Socket names
 | ${bd_id1}= | 1
 | ${bd_id2}= | 2
 | ${sock1}= | /tmp/sock-1-${bd_id1}
 | ${sock2}= | /tmp/sock-1-${bd_id2}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Keywords ***
 | Discover NDR or PDR for L2 Bridge Domain with VM
@@ -100,8 +101,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Setup Scheduler Policy for Vpp On All DUTs
 | | Run Keyword If | '${search_type}' == 'NDR'
 | | ... | Find NDR using binary search and pps

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot
index ea2958b..ec2adf2 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot
@@ -50,6 +50,7 @@
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 # Socket names
 | ${bd_id1}= | 1
 | ${bd_id2}= | 2
@@ -58,7 +59,7 @@
 # X520-DA2 bandwidth limit
 | ${s_limit}= | ${10000000000}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Keywords ***
 | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm
@@ -96,8 +97,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | ... | jumbo_frames=${jumbo_frames}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Traffic should pass with maximum rate | ${perf_trial_duration}
 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
 

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
index 9b58e05..ed3be3d 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
@@ -56,6 +56,7 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 # X520-DA2 bandwidth limit
 | ${s_limit} | ${10000000000}
 # Socket names
@@ -93,8 +94,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -125,8 +124,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -158,8 +155,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -190,8 +185,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -224,8 +217,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -257,8 +248,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -290,8 +279,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -322,8 +309,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -355,8 +340,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -387,8 +370,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -421,8 +402,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -454,8 +433,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -487,8 +464,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -519,8 +494,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -552,8 +525,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -584,8 +555,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -618,8 +587,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -651,8 +618,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot
index 788b078..e1df194 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot
@@ -59,6 +59,7 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 256
 | ${avg_imix_framesize}= | ${357.833}
 # X520-DA2 bandwidth limit
 | ${s_limit} | ${10000000000}
@@ -88,7 +89,6 @@
 | | ... | - search_type - Type of the search - non drop rate (NDR) or partial
 | | ... | drop rare (PDR). Type: string
 | | ...
-| | Set Test Variable | ${perf_qemu_qsz} | 256
 | | Set Test Variable | ${use_tuned_cfs} | ${True}
 | | Set Test Variable | ${framesize}
 | | Set Test Variable | ${min_rate}
@@ -115,8 +115,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Setup Scheduler Policy for Vpp On All DUTs
 | | Run Keyword If | '${search_type}' == 'NDR'
 | | ... | Find NDR using binary search and pps

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr.robot
index 3b28754..f51f469 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr.robot
@@ -50,6 +50,7 @@
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 256
 # Socket names
 | ${bd_id1}= | 1
 | ${bd_id2}= | 2
@@ -58,7 +59,7 @@
 # X520-DA2 bandwidth limit
 | ${s_limit}= | ${10000000000}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Keywords ***
 | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm
@@ -71,7 +72,6 @@
 | | [Arguments] | ${framesize} | ${wt} | ${rxq}
 | | ...
 | | # Test Variables required for test and test teardown
-| | Set Test Variable | ${perf_qemu_qsz} | 256
 | | Set Test Variable | ${framesize}
 | | ${get_framesize}= | Get Frame Size | ${framesize}
 | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
@@ -97,8 +97,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | ... | jumbo_frames=${jumbo_frames}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Traffic should pass with maximum rate | ${perf_trial_duration}
 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
 

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrpdrdisc.robot
index e04b6c6..9a24555 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrpdrdisc.robot
@@ -57,6 +57,7 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 256
 | ${avg_imix_framesize}= | ${357.833}
 # X520-DA2 bandwidth limit
 | ${s_limit} | ${10000000000}
@@ -86,7 +87,6 @@
 | | ... | - search_type - Type of the search - non drop rate (NDR) or partial
 | | ... | drop rare (PDR). Type: string
 | | ...
-| | Set Test Variable | ${perf_qemu_qsz} | 256
 | | Set Test Variable | ${framesize}
 | | Set Test Variable | ${min_rate}
 | | ${get_framesize}= | Set Variable If
@@ -112,8 +112,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Run Keyword If | '${search_type}' == 'NDR'
 | | ... | Find NDR using binary search and pps
 | | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot
index 74f5f29..59178d6 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot
@@ -49,6 +49,7 @@
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 # CPU settings
 | ${system_cpus}= | ${1}
 | ${vpp_cpus}= | ${5}
@@ -56,7 +57,7 @@
 # X520-DA2 bandwidth limit
 | ${s_limit}= | ${10000000000}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Keywords ***
 | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot
index d34cc00..5638485 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot
@@ -37,7 +37,7 @@
 | ... | vhost-user interfaces using 5 cores pinned to cpus 6-10 and 11-15 and
 | ... | 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages),
 | ... | 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is
-| ... | set to io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC
+| ... | set to io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC
 | ... | X520 Niantic by Intel.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
@@ -54,6 +54,7 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 # X520-DA2 bandwidth limit
 | ${s_limit}= | ${10000000000}
 # CPU settings
@@ -61,7 +62,7 @@
 | ${vpp_cpus}= | ${5}
 | ${vm_cpus}= | ${5}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Test Cases ***
 | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot
index cc91353..0ca2df6 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot
@@ -62,16 +62,17 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 | ${avg_imix_framesize}= | ${357.833}
 # X520-DA2 bandwidth limit
-| ${s_limit} | ${10000000000}
+| ${s_limit}= | ${10000000000}
 # Socket names
 | ${bd_id1}= | 1
 | ${bd_id2}= | 2
 | ${sock1}= | /tmp/sock-1-${bd_id1}
 | ${sock2}= | /tmp/sock-1-${bd_id2}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-macsrc50kdst50k
+| ${traffic_profile}= | trex-sl-3n-ethip4-macsrc50kdst50k
 
 *** Keywords ***
 | Discover NDR or PDR for L2 Bridge Domain with VM
@@ -103,8 +104,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Setup Scheduler Policy for Vpp On All DUTs
 | | Run Keyword If | '${search_type}' == 'NDR'
 | | ... | Find NDR using binary search and pps

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot
index 0505c7a..9359816 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot
@@ -62,6 +62,7 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 | ${avg_imix_framesize}= | ${357.833}
 # X520-DA2 bandwidth limit
 | ${s_limit} | ${10000000000}
@@ -103,8 +104,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Setup Scheduler Policy for Vpp On All DUTs
 | | Run Keyword If | '${search_type}' == 'NDR'
 | | ... | Find NDR using binary search and pps

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot
index 48a6dd7..9176bde 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot
@@ -62,16 +62,17 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 | ${avg_imix_framesize}= | ${357.833}
 # X520-DA2 bandwidth limit
-| ${s_limit} | ${10000000000}
+| ${s_limit}= | ${10000000000}
 # Socket names
 | ${bd_id1}= | 1
 | ${bd_id2}= | 2
 | ${sock1}= | /tmp/sock-1-${bd_id1}
 | ${sock2}= | /tmp/sock-1-${bd_id2}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-macsrc500kdst500k
+| ${traffic_profile}= | trex-sl-3n-ethip4-macsrc500kdst500k
 
 *** Keywords ***
 | Discover NDR or PDR for L2 Bridge Domain with VM
@@ -103,8 +104,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Setup Scheduler Policy for Vpp On All DUTs
 | | Run Keyword If | '${search_type}' == 'NDR'
 | | ... | Find NDR using binary search and pps

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot
index f1a4c28..9c88337 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot
@@ -58,14 +58,15 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 | ${avg_imix_framesize}= | ${357.833}
 # X520-DA2 bandwidth limit
-| ${s_limit} | ${10000000000}
+| ${s_limit}= | ${10000000000}
 # Socket names
 | ${sock1}= | /tmp/sock-1-1
 | ${sock2}= | /tmp/sock-1-2
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Keywords ***
 | Discover NDR or PDR for L2 xconnect with VM
@@ -97,8 +98,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Setup Scheduler Policy for Vpp On All DUTs
 | | Run Keyword If | '${search_type}' == 'NDR'
 | | ... | Find NDR using binary search and pps

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot
index 4d2ca42..2328947 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot
@@ -49,13 +49,14 @@
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 # Socket names
 | ${sock1}= | /tmp/sock-1-1
 | ${sock2}= | /tmp/sock-1-2
 # X520-DA2 bandwidth limit
 | ${s_limit}= | ${10000000000}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Keywords ***
 | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm
@@ -93,8 +94,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | ... | jumbo_frames=${jumbo_frames}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Traffic should pass with maximum rate | ${perf_trial_duration}
 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
 

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
index df1a65d..5d140f5 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
@@ -55,6 +55,7 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 | ${sock1}= | /tmp/sock-1-1
 | ${sock2}= | /tmp/sock-1-2
 # X520-DA2 bandwidth limit
@@ -89,8 +90,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -121,8 +120,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -154,8 +151,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -186,8 +181,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -220,8 +213,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -253,8 +244,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -286,8 +275,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -318,8 +305,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -351,8 +336,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -383,8 +366,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -417,8 +398,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -450,8 +429,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -483,8 +460,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -515,8 +490,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -548,8 +521,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -580,8 +551,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -614,8 +583,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -647,8 +614,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrchk.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrchk.robot
index de36f00..a71f904 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrchk.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrchk.robot
@@ -40,7 +40,7 @@
 | ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M
 | ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
 | ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
-| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520
+| ... | io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520
 | ... | Niantic by Intel.
 | ... | *[Ver] TG verification:* TG verifies throughput PDR (Partial Drop
 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
@@ -55,12 +55,13 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 | ${bd_id1}= | 1
 | ${bd_id2}= | 2
 | ${sock1}= | /tmp/sock-1-${bd_id1}
 | ${sock2}= | /tmp/sock-1-${bd_id2}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Keywords ***
 | Check PDR for L2XC with vhost and VM with dpdk-testpmd
@@ -94,8 +95,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Traffic should pass with partial loss | ${perf_trial_duration}
 | | ... | ${rate} | ${framesize} | ${traffic_profile}
 | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot
index 858f427..fb9c2cb 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot
@@ -58,14 +58,15 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 256
 | ${avg_imix_framesize}= | ${357.833}
 # X520-DA2 bandwidth limit
-| ${s_limit} | ${10000000000}
+| ${s_limit}= | ${10000000000}
 # Socket names
 | ${sock1}= | /tmp/sock-1-1
 | ${sock2}= | /tmp/sock-1-2
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Keywords ***
 | Discover NDR or PDR for L2 xconnect with VM
@@ -85,7 +86,6 @@
 | | ... | - search_type - Type of the search - non drop rate (NDR) or partial
 | | ... | drop rare (PDR). Type: string
 | | ...
-| | Set Test Variable | ${perf_qemu_qsz} | 256
 | | Set Test Variable | ${use_tuned_cfs} | ${True}
 | | Set Test Variable | ${framesize}
 | | Set Test Variable | ${min_rate}
@@ -112,8 +112,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Setup Scheduler Policy for Vpp On All DUTs
 | | Run Keyword If | '${search_type}' == 'NDR'
 | | ... | Find NDR using binary search and pps

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-mrr.robot
index 91590e7..190e748 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-mrr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-mrr.robot
@@ -49,13 +49,14 @@
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 256
 # Socket names
 | ${sock1}= | /tmp/sock-1-1
 | ${sock2}= | /tmp/sock-1-2
 # X520-DA2 bandwidth limit
 | ${s_limit}= | ${10000000000}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Keywords ***
 | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm
@@ -68,7 +69,6 @@
 | | [Arguments] | ${framesize} | ${wt} | ${rxq}
 | | ...
 | | # Test Variables required for test and test teardown
-| | Set Test Variable | ${perf_qemu_qsz} | 256
 | | Set Test Variable | ${framesize}
 | | ${get_framesize}= | Get Frame Size | ${framesize}
 | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
@@ -94,8 +94,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | ... | jumbo_frames=${jumbo_frames}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Traffic should pass with maximum rate | ${perf_trial_duration}
 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
 

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-ndrpdrdisc.robot
index 45c7de9..2f696b2 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-ndrpdrdisc.robot
@@ -56,14 +56,15 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 256
 | ${avg_imix_framesize}= | ${357.833}
 # X520-DA2 bandwidth limit
-| ${s_limit} | ${10000000000}
+| ${s_limit}= | ${10000000000}
 # Socket names
 | ${sock1}= | /tmp/sock-1-1
 | ${sock2}= | /tmp/sock-1-2
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Keywords ***
 | Discover NDR or PDR for L2 xconnect with VM
@@ -83,7 +84,6 @@
 | | ... | - search_type - Type of the search - non drop rate (NDR) or partial
 | | ... | drop rare (PDR). Type: string
 | | ...
-| | Set Test Variable | ${perf_qemu_qsz} | 256
 | | Set Test Variable | ${framesize}
 | | Set Test Variable | ${min_rate}
 | | ${get_framesize}= | Set Variable If
@@ -109,8 +109,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Run Keyword If | '${search_type}' == 'NDR'
 | | ... | Find NDR using binary search and pps
 | | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr.robot
index b01648c..867632a 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr.robot
@@ -49,6 +49,7 @@
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 #CPU settings
 | ${system_cpus}= | ${1}
 | ${vpp_cpus}= | ${5}
@@ -56,7 +57,7 @@
 # X520-DA2 bandwidth limit
 | ${s_limit}= | ${10000000000}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Keywords ***
 | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot
index 0acf3f2..37c1419 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot
@@ -38,7 +38,7 @@
 | ... | Guests are running DPDK testpmd interconnecting vhost-user interfaces
 | ... | using 5 cores pinned to cpus 6-10 and 11-15 and 2048M memory. Testpmd is
 | ... | using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4
-| ... | cores dedicated for io), forwarding mode is set to io, rxd/txd=256,
+| ... | cores dedicated for io), forwarding mode is set to io, rxd/txd=1024,
 | ... | burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
@@ -55,6 +55,7 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 # X520-DA2 bandwidth limit
 | ${s_limit} | ${10000000000}
 #CPU settings

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot
index 8663e4f..f0ff7f2 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot
@@ -58,6 +58,7 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 | ${avg_imix_framesize}= | ${357.833}
 # X520-DA2 bandwidth limit
 | ${s_limit} | ${10000000000}
@@ -102,8 +103,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Setup Scheduler Policy for Vpp On All DUTs
 | | Run Keyword If | '${search_type}' == 'NDR'
 | | ... | Find NDR using binary search and pps

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr.robot
index d242bd7..664c11c 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr.robot
@@ -49,6 +49,7 @@
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 # Socket names
 | ${sock1}= | /tmp/sock-1
 | ${sock2}= | /tmp/sock-2
@@ -96,8 +97,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac} | jumbo_frames=${jumbo_frames}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Traffic should pass with maximum rate | ${perf_trial_duration}
 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
 

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
index c488d78..31dc438 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
@@ -56,6 +56,7 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 # X520-DA2 bandwidth limit
 | ${s_limit} | ${10000000000}
 | ${sock1}= | /tmp/sock-1
@@ -63,7 +64,7 @@
 | ${fib_table_1}= | 100
 | ${fib_table_2}= | 101
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src253
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
 
 *** Test Cases ***
 | tc01-64B-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrdisc
@@ -94,8 +95,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -128,8 +127,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -163,8 +160,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -197,8 +192,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -233,8 +226,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -268,8 +259,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -303,8 +292,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -337,8 +324,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -372,8 +357,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -406,8 +389,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -442,8 +423,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -477,8 +456,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -512,8 +489,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -546,8 +521,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -581,8 +554,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -615,8 +586,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -651,8 +620,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -686,8 +653,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-pdrchk.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-pdrchk.robot
index 5ef535b..e47e9bc 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-pdrchk.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-pdrchk.robot
@@ -39,7 +39,7 @@
 | ... | interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9
 | ... | and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages),
 | ... | 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is
-| ... | set to mac, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE
+| ... | set to mac, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE
 | ... | NIC X520 Niantic by Intel.
 | ... | *[Ver] TG verification:* TG verifies throughput PDR (Partial Drop
 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
@@ -54,12 +54,13 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 | ${sock1}= | /tmp/sock-1
 | ${sock2}= | /tmp/sock-2
 | ${fib_table_1}= | 100
 | ${fib_table_2}= | 101
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src253
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
 
 *** Keywords ***
 | Check PDR for IPv4 routing with vhost and VM with dpdk-testpmd
@@ -95,8 +96,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Traffic should pass with partial loss | ${perf_trial_duration}
 | | ... | ${rate} | ${framesize} | ${traffic_profile}
 | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot
index 4585279..c57b293 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot
@@ -58,6 +58,7 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 256
 | ${avg_imix_framesize}= | ${357.833}
 # X520-DA2 bandwidth limit
 | ${s_limit} | ${10000000000}
@@ -68,7 +69,7 @@
 | ${fib_table_1}= | 100
 | ${fib_table_2}= | 101
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src253
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
 
 *** Keywords ***
 | Discover NDR or PDR for IPv4 forwarding with VM
@@ -88,7 +89,6 @@
 | | ... | - search_type - Type of the search - non drop rate (NDR) or partial
 | | ... | drop rare (PDR). Type: string
 | | ...
-| | Set Test Variable | ${perf_qemu_qsz} | 256
 | | Set Test Variable | ${use_tuned_cfs} | ${True}
 | | Set Test Variable | ${framesize}
 | | Set Test Variable | ${min_rate}
@@ -117,8 +117,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Setup Scheduler Policy for Vpp On All DUTs
 | | Run Keyword If | '${search_type}' == 'NDR'
 | | ... | Find NDR using binary search and pps

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-mrr.robot
index 2949e9f..d8a7638 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-mrr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-mrr.robot
@@ -49,6 +49,7 @@
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 256
 # Socket names
 | ${sock1}= | /tmp/sock-1-1
 | ${sock2}= | /tmp/sock-1-2
@@ -58,7 +59,7 @@
 # X520-DA2 bandwidth limit
 | ${s_limit}= | ${10000000000}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src253
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
 
 *** Keywords ***
 | Check RR for eth-ip4base-eth-2vhostvr256-1vm
@@ -71,7 +72,6 @@
 | | [Arguments] | ${framesize} | ${wt} | ${rxq}
 | | ...
 | | # Test Variables required for test and test teardown
-| | Set Test Variable | ${perf_qemu_qsz} | 256
 | | Set Test Variable | ${framesize}
 | | ${get_framesize}= | Get Frame Size | ${framesize}
 | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
@@ -97,8 +97,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Traffic should pass with maximum rate | ${perf_trial_duration}
 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
 

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-ndrpdrdisc.robot
index 3dd5143..bd807cf 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-ndrpdrdisc.robot
@@ -56,6 +56,7 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 256
 | ${avg_imix_framesize}= | ${357.833}
 # X520-DA2 bandwidth limit
 | ${s_limit} | ${10000000000}
@@ -86,7 +87,6 @@
 | | ... | - search_type - Type of the search - non drop rate (NDR) or partial
 | | ... | drop rare (PDR). Type: string
 | | ...
-| | Set Test Variable | ${perf_qemu_qsz} | 256
 | | Set Test Variable | ${framesize}
 | | Set Test Variable | ${min_rate}
 | | ${get_framesize}= | Set Variable If
@@ -114,8 +114,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
 | | ... | ${dut2_vif2_mac}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Run Keyword If | '${search_type}' == 'NDR'
 | | ... | Find NDR using binary search and pps
 | | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr.robot
index 3e10115..cdd6e90 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr.robot
@@ -49,6 +49,7 @@
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 # Socket names
 | ${sock1}= | /tmp/sock-1
 | ${sock2}= | /tmp/sock-2
@@ -62,7 +63,7 @@
 # X520-DA2 bandwidth limit
 | ${s_limit}= | ${10000000000}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src253
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
 
 *** Keywords ***
 | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot
index dc9f0e9..0dcc9ad 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot
@@ -56,6 +56,7 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 # X520-DA2 bandwidth limit
 | ${s_limit}= | ${10000000000}
 # CPU settings
@@ -63,7 +64,7 @@
 | ${vpp_cpus}= | ${5}
 | ${vm_cpus}= | ${5}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src253
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
 
 *** Test Cases ***
 | tc01-64B-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot
index 4538a53..c11a4ff 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot
@@ -53,6 +53,7 @@
 | ... | *[Ref] Applicable standard specifications:* RFC7348.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 # Socket names
 | ${bd_id1}= | 1
 | ${bd_id2}= | 2
@@ -62,7 +63,7 @@
 | ${s_limit}= | ${10000000000}
 | ${vxlan_overhead} | ${50}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Keywords ***
 | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm
@@ -101,8 +102,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | ... | jumbo_frames=${jumbo_frames}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Traffic should pass with maximum rate | ${perf_trial_duration}
 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
 

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
index 211e6b5..3fe47b1 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
@@ -42,7 +42,7 @@
 | ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M
 | ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
 | ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
-| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520
+| ... | io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520
 | ... | Niantic by Intel.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
@@ -59,6 +59,7 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 # X520-DA2 bandwidth limit
 | ${s_limit} | ${10000000000}
 | ${vxlan_overhead} | ${50}
@@ -68,7 +69,7 @@
 | ${sock1}= | /tmp/sock-1-${bd_id1}
 | ${sock2}= | /tmp/sock-1-${bd_id2}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Test Cases ***
 | tc01-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc
@@ -100,8 +101,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -135,8 +134,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -170,8 +167,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -204,8 +199,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -241,8 +234,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -277,8 +268,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -313,8 +302,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -348,8 +335,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -383,8 +368,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -417,8 +400,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -454,8 +435,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -490,8 +469,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -526,8 +503,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -561,8 +536,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -596,8 +569,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -630,8 +601,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -667,8 +636,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -703,8 +670,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
index 4605a4b..1ac64d3 100644 (file)
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
@@ -39,7 +39,7 @@
 | ... | vhost-user interfaces using 5 cores pinned to cpus on NUMA1 and 2048M
 | ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
 | ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
-| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X710
+| ... | io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X710
 | ... | by Intel.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
@@ -56,15 +56,16 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 # X710 bandwidth limit
-| ${s_limit} | ${10000000000}
+| ${s_limit}= | ${10000000000}
 # Socket names
 | ${bd_id1}= | 1
 | ${bd_id2}= | 2
 | ${sock1}= | /tmp/sock-1-${bd_id1}
 | ${sock2}= | /tmp/sock-1-${bd_id2}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Test Cases ***
 | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc
@@ -95,8 +96,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -129,8 +128,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -164,8 +161,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -198,8 +193,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -234,8 +227,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -268,8 +259,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -303,8 +292,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -337,8 +324,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -372,8 +357,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -406,8 +389,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -442,8 +423,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -477,8 +456,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -512,8 +489,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -546,8 +521,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -581,8 +554,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -615,8 +586,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -651,8 +620,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -686,8 +653,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}

diff --git a/tests/vpp/perf/vm_vhost/40ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/40ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot
index cb34f35..b75af8f 100644 (file)
--- a/tests/vpp/perf/vm_vhost/40ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot
+++ b/tests/vpp/perf/vm_vhost/40ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot
@@ -49,6 +49,7 @@
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 # Socket names
 | ${bd_id1}= | 1
 | ${bd_id2}= | 2
@@ -57,7 +58,7 @@
 # X710 bandwidth limit
 | ${s_limit} | ${10000000000}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Keywords ***
 | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm
@@ -95,8 +96,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | ... | jumbo_frames=${jumbo_frames}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Traffic should pass with maximum rate | ${perf_trial_duration}
 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
 

diff --git a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot
index 0875c9a..ae5f4b8 100644 (file)
--- a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot
+++ b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot
@@ -49,17 +49,18 @@
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 # Socket names
 | ${bd_id1}= | 1
 | ${bd_id2}= | 2
 | ${sock1}= | /tmp/sock-1-${bd_id1}
 | ${sock2}= | /tmp/sock-1-${bd_id2}
 # XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
-| ${s_24.5G} | ${24500000000}
+| ${s_24.5G}= | ${24500000000}
 # XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
-| ${s_18.75Mpps} | ${18750000}
+| ${s_18.75Mpps}= | ${18750000}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Keywords ***
 | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm
@@ -99,8 +100,6 @@
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | ... | jumbo_frames=${jumbo_frames}
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Traffic should pass with maximum rate | ${perf_trial_duration}
 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
 

diff --git a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
index 21b4a0e..4fafafe 100644 (file)
--- a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
@@ -39,7 +39,7 @@
 | ... | vhost-user interfaces using 5 cores pinned to cpus on NUMA1 and 2048M
 | ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
 | ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
-| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p40GE NIC XL710
+| ... | io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p40GE NIC XL710
 | ... | by Intel.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
@@ -56,17 +56,18 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 # XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
-| ${s_24.5G} | ${24500000000}
+| ${s_24.5G}= | ${24500000000}
 # XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
-| ${s_18.75Mpps} | ${18750000}
+| ${s_18.75Mpps}= | ${18750000}
 # Socket names
 | ${bd_id1}= | 1
 | ${bd_id2}= | 2
 | ${sock1}= | /tmp/sock-1-${bd_id1}
 | ${sock2}= | /tmp/sock-1-${bd_id2}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Test Cases ***
 | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc
@@ -97,8 +98,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -131,8 +130,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -166,8 +163,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -200,8 +195,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -236,8 +229,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -270,8 +261,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -305,8 +294,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -339,8 +326,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -374,8 +359,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -408,8 +391,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -444,8 +425,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -479,8 +458,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -514,8 +491,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -548,8 +523,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -583,8 +556,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -617,8 +588,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -653,8 +622,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
@@ -688,8 +655,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}

diff --git a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot
index 3d38724..2c559fd 100644 (file)
--- a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot
+++ b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot
@@ -49,16 +49,17 @@
 | ... | addresses of the TG node interfaces.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 # CPU settings
 | ${system_cpus}= | ${1}
 | ${vpp_cpus}= | ${5}
 | ${vm_cpus}= | ${5}
 # XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
-| ${s_24.5G} | ${24500000000}
+| ${s_24.5G}= | ${24500000000}
 # XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
-| ${s_18.75Mpps} | ${18750000}
+| ${s_18.75Mpps}= | ${18750000}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Keywords ***
 | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm

diff --git a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot
index 22b9c63..112bd41 100644 (file)
--- a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot
@@ -39,7 +39,7 @@
 | ... | vhost-user interfaces using 5 cores pinned to cpus on NUMA1 and 2048M
 | ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
 | ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
-| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p40GE NIC XL710
+| ... | io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p40GE NIC XL710
 | ... | by Intel.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
@@ -56,16 +56,17 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 # XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
-| ${s_24.5G} | ${24500000000}
+| ${s_24.5G}= | ${24500000000}
 # XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
-| ${s_18.75Mpps} | ${18750000}
+| ${s_18.75Mpps}= | ${18750000}
 # CPU settings
 | ${system_cpus}= | ${1}
 | ${vpp_cpus}= | ${5}
 | ${vm_cpus}= | ${5}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Test Cases ***
 | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc

diff --git a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot
index ad81380..dec4d1b 100644 (file)
--- a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot
@@ -39,7 +39,7 @@
 | ... | using 5 cores pinned to cpus on NUMA1 (cpus 24-28 and 29-34) and 2048M
 | ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
 | ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
-| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p40GE NIC XL710
+| ... | io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p40GE NIC XL710
 | ... | by Intel.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
@@ -56,16 +56,17 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 # XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
-| ${s_24.5G} | ${24500000000}
+| ${s_24.5G}= | ${24500000000}
 # XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
-| ${s_18.75Mpps} | ${18750000}
+| ${s_18.75Mpps}= | ${18750000}
 # CPU settings
 | ${system_cpus}= | ${1}
 | ${vpp_cpus}= | ${5}
 | ${vm_cpus}= | ${5}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Test Cases ***
 | tc01-64B-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc

diff --git a/tests/vpp/perf/vm_vhost/40ge2p1xl710-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/40ge2p1xl710-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot
index a1a0143..86f8d9e 100644 (file)
--- a/tests/vpp/perf/vm_vhost/40ge2p1xl710-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/40ge2p1xl710-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot
@@ -39,7 +39,7 @@
 | ... | interconnecting vhost-user interfaces using 5 cores pinned to cpus on
 | ... | NUMA1 (cpus 24-28 and 29-34) and 2048M memory. Testpmd is using
 | ... | socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores
-| ... | dedicated for io), forwarding mode is set to io, rxd/txd=256, burst=64.
+| ... | dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64.
 | ... | DUT1, DUT2 are tested with 2p40GE NIC XL710 by Intel.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
@@ -56,16 +56,17 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 # XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
-| ${s_24.5G} | ${24500000000}
+| ${s_24.5G}= | ${24500000000}
 # XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
-| ${s_18.75Mpps} | ${18750000}
+| ${s_18.75Mpps}= | ${18750000}
 # CPU settings
 | ${system_cpus}= | ${1}
 | ${vpp_cpus}= | ${5}
 | ${vm_cpus}= | ${5}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src253
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
 
 *** Test Cases ***
 | tc01-64B-1t1c-eth-ip4base-eth-4vhostvr1024-2vm-ndrdisc