VAT_BIN_NAME = 'vpp_api_test'
# Honeycomb directory location at topology nodes:
- REMOTE_HC_DIR = '/opt/honeycomb/vpp-integration-karaf-1.0.0-SNAPSHOT'
+ REMOTE_HC_DIR = '/opt/honeycomb'
+
+ # Honeycomb persistence files location
+ REMOTE_HC_PERSIST = '/var/lib/honeycomb/persist'
# Honeycomb templates location
RESOURCES_TPL_HC = 'resources/templates/honeycomb'
:type nodes: list
:raises HoneycombError: If persisted configuration could not be removed.
"""
- cmd = "rm {0}/data/persistence/honeycomb/*".format(Const.REMOTE_HC_DIR)
+ cmd = "rm -rf {}/*".format(Const.REMOTE_HC_PERSIST)
for node in nodes:
if node['type'] == NodeType.DUT:
ssh = SSH()
@staticmethod
def modify_persistence_files(node, find, replace):
- """Searches contents of persistence file config.json for the provided
+ """Searches contents of persistence file data.json for the provided
string, and replaces all occurrences with another string.
:param node: Honeycomb node.
"""
argument = "\"s/{0}/{1}/g\"".format(find, replace)
- path = "{0}/etc/opendaylight/honeycomb/config.json".format(
- Const.REMOTE_HC_DIR)
+ path = "{0}/config/data.json".format(Const.REMOTE_HC_PERSIST)
command = "sed -i {0} {1}".format(argument, path)
ssh = SSH()
logger.console("\nStarting Honeycomb service ...")
- cmd = "{0}/bin/start".format(Const.REMOTE_HC_DIR)
+ cmd = "sudo service honeycomb start"
for node in nodes:
if node['type'] == NodeType.DUT:
"""
logger.console("\nShutting down Honeycomb service ...")
- cmd = "{0}/bin/stop".format(Const.REMOTE_HC_DIR)
+ cmd = "sudo service honeycomb stop"
errors = []
for node in nodes:
else:
raise HoneycombError('Unexpected return code: {0}.'.
format(status_code))
+
+ status_code, _ = HcUtil.get_honeycomb_data(
+ node, "config_vpp_interfaces")
+ if status_code != HTTPCodes.OK:
+ raise HoneycombError('Honeycomb on node {0} running but '
+ 'not yet ready.'.format(node['host']),
+ enable_logging=False)
return True
@staticmethod
:return: True if all GETs fail to connect.
:rtype bool
"""
- cmd = "ps -ef | grep -v grep | grep karaf"
+ cmd = "ps -ef | grep -v grep | grep honeycomb"
for node in nodes:
if node['type'] == NodeType.DUT:
try:
format(node['host']))
return True
+ @staticmethod
+ def configure_unsecured_access(*nodes):
+ """Configure Honeycomb to allow restconf requests through insecure HTTP
+ used by tests. By default this is only allowed for localhost.
+
+ :param nodes: All nodes in test topology.
+ :type nodes: dict
+ :raises HoneycombError: If the configuration could not be changed.
+ """
+ # TODO: Modify tests to use HTTPS instead.
+
+ find = "restconf-binding-address"
+ replace = '\\"restconf-binding-address\\": \\"0.0.0.0\\",'
+
+ argument = '"/{0}/c\\ {1}"'.format(find, replace)
+ path = "{0}/config/honeycomb.json".format(Const.REMOTE_HC_DIR)
+ command = "sed -i {0} {1}".format(argument, path)
+
+ ssh = SSH()
+ for node in nodes:
+ if node['type'] == NodeType.DUT:
+ ssh.connect(node)
+ (ret_code, _, stderr) = ssh.exec_command_sudo(command)
+ if ret_code != 0:
+ raise HoneycombError("Failed to modify configuration on "
+ "node {0}, {1}".format(node, stderr))
+
@staticmethod
def print_environment(nodes):
"""Print information about the nodes to log. The information is defined
ssh = SSH()
ssh.connect(node)
ssh.exec_command_sudo(cmd)
+
self._msg = "{0}: {1}".format(self.__class__.__name__, msg)
self._details = details
if enable_logging:
- logger.error(self._msg)
logger.debug(self._details)
def __repr__(self):
:return: Interface name of the interface connected to the given link.
:rtype: str
"""
- return Topology._get_interface_by_key_value(node, "vpp_sw_index", sw_index)
+ return Topology._get_interface_by_key_value(node, "vpp_sw_index",
+ sw_index)
@staticmethod
def get_interface_sw_index(node, iface_key):
- """Get VPP sw_if_index for the interface.
+ """Get VPP sw_if_index for the interface using interface key.
:param node: Node to get interface sw_if_index on.
:param iface_key: Interface key from topology file, or sw_index.
except (KeyError, ValueError):
return None
+ @staticmethod
+ def get_interface_sw_index_by_name(node, iface_name):
+ """Get VPP sw_if_index for the interface using interface name.
+
+ :param node: Node to get interface sw_if_index on.
+ :param iface_name: Interface name.
+ :type node: dict
+ :type iface_name: str
+ :return: Return sw_if_index or None if not found.
+ :raises TypeError: If provided interface name is not a string.
+ """
+ try:
+ if isinstance(iface_name, basestring):
+ iface_key = Topology.get_interface_by_name(node, iface_name)
+ return node['interfaces'][iface_key].get('vpp_sw_index')
+ else:
+ raise TypeError("Interface name must be a string.")
+ except (KeyError, ValueError):
+ return None
+
@staticmethod
def get_interface_mtu(node, iface_key):
"""Get interface MTU.
if filt == interface['model']:
link_names.append(interface['link'])
elif (filter_list is not None) and ('model' not in interface):
- logger.trace("Cannot apply filter on interface: {}" \
+ logger.trace("Cannot apply filter on interface: {}"
.format(str(interface)))
else:
link_names.append(interface['link'])
:param filter_list_node2: Link filter criteria for node2.
:type node1: dict
:type node2: dict
- :type filter_list1: list of strings
- :type filter_list2: list of strings
+ :type filter_list_node1: list of strings
+ :type filter_list_node2: list of strings
:return: List of strings that represent connecting link names.
:rtype: list
"""
else:
return connecting_links[0]
- @keyword('Get egress interfaces name on "${node1}" for link with "${node2}"')
+ @keyword('Get egress interfaces name on "${node1}" for link with '
+ '"${node2}"')
def get_egress_interfaces_name_for_nodes(self, node1, node2):
"""Get egress interfaces on node1 for link with node2.
*** Settings ***
| Library | resources/libraries/python/honeycomb/HoneycombSetup.py
| Library | resources/libraries/python/honeycomb/HoneycombUtil.py
+| Library | resources/libraries/python/honeycomb/HcPersistence.py
*** Keywords ***
| Setup Honeycomb service on DUTs
| | ...
| | [Arguments] | @{duts}
| | Start honeycomb on DUTs | @{duts}
-| | Wait until keyword succeeds | 4min | 20sec
+| | Wait until keyword succeeds | 1min | 10sec
| | ... | Check honeycomb startup state | @{duts}
| Stop honeycomb service on DUTs
| | ...
| | [Arguments] | @{duts}
| | Stop honeycomb on DUTs | @{duts}
-| | Wait until keyword succeeds | 2m | 10s
+| | Wait until keyword succeeds | 30sec | 5sec
| | ... | Check honeycomb shutdown state | @{duts}
| Clear persisted Honeycomb configuration
| | ...
| | ... | \| Clear persisted Honeycomb configuration \| ${nodes['DUT1']} \|
| | [Arguments] | @{duts}
-| | Clear persisted Honeycomb config | @{duts}
\ No newline at end of file
+| | Clear persisted Honeycomb config | @{duts}
+
+| Restart Honeycomb and VPP and clear persisted configuration
+| | [Documentation] | Restarts Honeycomb and VPP with default configuration.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Restart Honeycomb and VPP and clear persisted configuration \
+| | ... | \| ${nodes['DUT1']} \|
+| | [Arguments] | ${node}
+| | Log | Performing clean restart of Honeycomb and VPP. | console=True
+| | Stop Honeycomb service on DUTs | ${node}
+| | Clear persisted Honeycomb configuration | ${node}
+| | Setup DUT | ${node}
+| | Setup Honeycomb service on DUTs | ${node}
\ No newline at end of file
| | ... | ${api_data['ietf-ip:ipv4']['neighbor'][0]['link-layer-address']}
| | :FOR | ${key} | IN | @{settings.keys()}
| | | Should be equal
-| | | ... | ${settings['{key']} | ${api_data['ietf-ip:ipv4']['{$key}']}
+| | | ... | ${settings['${key}']} | ${api_data['ietf-ip:ipv4']['${key}']}
| IPv4 config from VAT should be
| | [Documentation] | Retrieves interface ipv4 configuration through VAT and\
| | [Arguments] | ${node} | ${interface} | ${address} | ${netmask}
| | ${vpp_data}= | interfaceCLI.VPP get interface ip addresses
| | ... | ${node} | ${interface} | ipv4
-#TODO: update based on resolution of bug https://jira.fd.io/browse/VPP-132
| | Should be equal | ${vpp_data[0]['ip']} | ${address}
| | Should be equal | ${vpp_data[0]['netmask']} | ${netmask}
*** Settings ***
| Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords
| ... | WITH NAME | InterfaceAPI
-| Library | resources.libraries.python.honeycomb.HcPersistence
+| Library | resources/libraries/python/honeycomb/HcPersistence.py
| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
| Resource | resources/libraries/robot/honeycomb/interfaces.robot
| Resource | resources/libraries/robot/honeycomb/vxlan.robot
| | Should be equal as strings
| | ... | ${api_data['if-index']} | ${sw_if_index}
+| VxLAN GPE configuration from Honeycomb should be empty
+| | [Documentation] | Uses Honeycomb API to get operational data about\
+| | ... | the given interface and expects to fail.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ... | \| VxLAN GPE configuration from Honeycomb should be empty\
+| | ... | \| ${nodes['DUT1']} \| vxlan_gpe_tunnel0 \|
+| | ...
+| | [Arguments] | ${node} | ${interface}
+| | ...
+| | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface}
+| | Should be empty | ${api_data}
+
| VxLAN GPE configuration from VAT should be empty
| | [Documentation] | Uses VAT to get operational data about the given\
-| | ... | interface and expects empty dictionary.
+| | ... | interface and expects an empty dictionary.
| | ...
| | ... | *Arguments:*
| | ... | - node - information about a DUT node. Type: dictionary
"""Test variables for Honeycomb L2 FIB test suite."""
-# Bridge domain name.
-bd_name = 'test-l2-bd'
-bd_index = 1
-
-# Bridge domain settings used while creating a test bridge domain.
-bd_settings = {
- 'flood': True,
- 'forward': True,
- 'learn': True,
- 'unknown-unicast-flood': True,
- 'arp-termination': True
-}
-
-# Bridge domain configuration used while adding the bridge domain to an
-# interface.
-if_bd_settings = {
- 'bridge-domain': bd_name,
- 'split-horizon-group': 1,
- 'bridged-virtual-interface': False
-}
-
-# Add L2 FIB entry (forward).
-# Configuration data:
-l2_fib_forward_cfg = {
- "phys-address": "aa:bb:cc:dd:ee:ff",
- "outgoing-interface": "GigabitEthernet0/8/0",
- "action": "l2-fib-forward"
-}
-
-# Expected operational data:
-l2_fib_forward_oper = {
- "phys-address": "aa:bb:cc:dd:ee:ff",
- "outgoing-interface": "GigabitEthernet0/8/0",
- "bridged-virtual-interface": False,
- "action": "v3po:l2-fib-forward",
- "static-config": False
-}
-
-# Expected VAT data:
-l2_fib_forward_vat = {
- "mac": int("".join(l2_fib_forward_oper["phys-address"].split(':')), 16),
- "static_mac": 0,
- "filter_mac": 0,
- "bvi_mac": 0
- }
-
-# Add L2 FIB entry (static, forward).
-# Configuration data:
-l2_fib_static_forward_cfg = {
- "phys-address": "22:22:33:44:55:66",
- "outgoing-interface": "GigabitEthernet0/8/0",
- "static-config": True,
- "action": "l2-fib-forward"
-}
-
-# Expected operational data:
-l2_fib_static_forward_oper = {
- "phys-address": "22:22:33:44:55:66",
- "outgoing-interface": "GigabitEthernet0/8/0",
- "bridged-virtual-interface": False,
- "action": "v3po:l2-fib-forward",
- "static-config": True
-}
-
-# Expected VAT data:
-l2_fib_static_forward_vat = {
- "mac": int("".join(l2_fib_static_forward_oper["phys-address"].
- split(':')), 16),
- "sw_if_index": 5,
- "static_mac": 1,
- "filter_mac": 0,
- "bvi_mac": 0
-}
-
-# Add L2 FIB entry (filter).
-# Configuration data:
-l2_fib_filter_cfg = {
- "phys-address": "00:01:02:03:04:05",
- "outgoing-interface": "GigabitEthernet0/8/0",
- "static-config": True,
- "action": "l2-fib-filter"
-}
-
-# Expected operational data:
-l2_fib_filter_oper = {
- "phys-address": "00:01:02:03:04:05",
- "outgoing-interface": "GigabitEthernet0/8/0",
- "bridged-virtual-interface": False,
- "action": "v3po:l2-fib-filter",
- "static-config": True
-}
-
-# Expected VAT data:
-l2_fib_filter_vat = {
- "mac": int("".join(l2_fib_filter_oper["phys-address"].split(':')), 16),
- "sw_if_index": 5,
- "static_mac": 1,
- "filter_mac": 1,
- "bvi_mac": 0
-}
-
-# WRONG configuration data - Add L2 FIB entry.
-l2_fib_forward_cfg_wrong_mac = {
- "phys-address": "WRONG-MAC",
- "outgoing-interface": "GigabitEthernet0/8/0",
- "action": "l2-fib-forward"
-}
-
-l2_fib_forward_cfg_wrong_if = {
- "phys-address": "aa:bb:cc:dd:ee:ff",
- "outgoing-interface": "WRONG-INTERFACE",
- "action": "l2-fib-forward"
-}
-
-l2_fib_forward_cfg_wrong_action = {
- "phys-address": "aa:bb:cc:dd:ee:ff",
- "outgoing-interface": "GigabitEthernet0/8/0",
- "action": "WRONG-ACTION"
-}
-
-# Modify L2 FIB entry (forward).
-# Configuration data:
-l2_fib_forward_modified_cfg = {
- "phys-address": "aa:bb:cc:dd:ee:ff",
- "outgoing-interface": "GigabitEthernet0/9/0",
- "action": "l2-fib-forward"
-}
+from resources.libraries.python.topology import Topology
+
+
+def get_variables(node, interface, interface2):
+ """Creates and returns dictionary of test variables.
+
+ :param node: A Honeycomb node.
+ :param interface: Name of an interface on the specified node.
+ :param interface: Name of another interface on the specified node.
+ :type node: dict
+ :type interface: str
+ :type interface2: str
+ :return: Dictionary of test variables.
+ :rtype: dict
+ """
+ # Interface sw_if_index
+ sw_if_index = Topology.get_interface_sw_index_by_name(node, interface)
+ sw_if_index2 = Topology.get_interface_sw_index_by_name(node, interface2)
+
+ # Bridge domain name.
+ bd_name = 'test-l2-bd'
+
+ # L2 FIB MACs used in configuration.
+ notstatic = "aa:bb:cc:dd:ee:ff"
+ static = "22:22:33:44:55:66"
+ filtered = "00:01:02:03:04:05"
+
+ variables = {
+ 'bd_name': bd_name,
+ # Bridge domain settings used while creating a test bridge domain.
+ 'bd_settings': {
+ 'flood': True,
+ 'forward': True,
+ 'learn': True,
+ 'unknown-unicast-flood': True,
+ 'arp-termination': True
+ },
+
+ # Index of created bridge domain.
+ 'bd_index': 1,
+
+ # Bridge domain configuration used while adding the bridge domain to an
+ # interface.
+ 'if_bd_settings': {
+ 'bridge-domain': bd_name,
+ 'split-horizon-group': 1,
+ 'bridged-virtual-interface': False
+ },
+
+ # Add L2 FIB entry (forward).
+ # Configuration data:
+ 'l2_fib_forward_cfg': {
+ "phys-address": notstatic,
+ "outgoing-interface": interface,
+ "action": "l2-fib-forward"
+ },
+
+ # Expected operational data:
+ 'l2_fib_forward_oper': {
+ "phys-address": notstatic,
+ "outgoing-interface": interface,
+ "bridged-virtual-interface": False,
+ "action": "v3po:l2-fib-forward",
+ "static-config": False
+ },
+
+ # Expected VAT data:
+ 'l2_fib_forward_vat': {
+ "mac": int("".join(notstatic.split(':')), 16),
+ "sw_if_index": sw_if_index,
+ "static_mac": 0,
+ "filter_mac": 0,
+ "bvi_mac": 0
+ },
+
+ # Add L2 FIB entry (static, forward).
+ # Configuration data:
+ 'l2_fib_static_forward_cfg': {
+ "phys-address": static,
+ "outgoing-interface": interface,
+ "static-config": True,
+ "action": "l2-fib-forward"
+ },
+
+ # Expected operational data:
+ 'l2_fib_static_forward_oper': {
+ "phys-address": static,
+ "outgoing-interface": interface,
+ "bridged-virtual-interface": False,
+ "action": "v3po:l2-fib-forward",
+ "static-config": True
+ },
+
+ # Expected VAT data:
+ 'l2_fib_static_forward_vat': {
+ "mac": int("".join(static.split(':')), 16),
+ "sw_if_index": sw_if_index,
+ "static_mac": 1,
+ "filter_mac": 0,
+ "bvi_mac": 0
+ },
+
+ # Add L2 FIB entry (filter).
+ # Configuration data:
+ 'l2_fib_filter_cfg': {
+ "phys-address": filtered,
+ "outgoing-interface": interface,
+ "static-config": True,
+ "action": "l2-fib-filter"
+ },
+
+ # Expected operational data:
+ 'l2_fib_filter_oper': {
+ "phys-address": filtered,
+ "outgoing-interface": interface,
+ "bridged-virtual-interface": False,
+ "action": "v3po:l2-fib-filter",
+ "static-config": True
+ },
+
+ # Expected VAT data:
+ 'l2_fib_filter_vat': {
+ "mac": int("".join(filtered.split(':')), 16),
+ "sw_if_index": sw_if_index,
+ "static_mac": 1,
+ "filter_mac": 1,
+ "bvi_mac": 0
+ },
+
+ # WRONG configuration data - Add L2 FIB entry.
+ 'l2_fib_forward_cfg_wrong_mac': {
+ "phys-address": "WRONG-MAC",
+ "outgoing-interface": interface,
+ "action": "l2-fib-forward"
+ },
+
+ 'l2_fib_forward_cfg_wrong_if': {
+ "phys-address": notstatic,
+ "outgoing-interface": "WRONG-INTERFACE",
+ "action": "l2-fib-forward"
+ },
+
+ 'l2_fib_forward_cfg_wrong_action': {
+ "phys-address": notstatic,
+ "outgoing-interface": interface,
+ "action": "WRONG-ACTION"
+ },
+
+ # Modify L2 FIB entry (forward).
+ # Configuration data:
+ 'l2_fib_forward_modified_cfg': {
+ "phys-address": notstatic,
+ "outgoing-interface": sw_if_index2,
+ "action": "l2-fib-forward"
+ }
+ }
+ return variables
*** Settings ***
| Resource | resources/libraries/robot/default.robot
| Resource | resources/libraries/robot/honeycomb/interfaces.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
| Force Tags | honeycomb_sanity
+| Suite Teardown | Run Keyword If Any Tests Failed
+| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
| Documentation | *Honeycomb interface management test suite.*
| ...
| ... | Test suite uses the first interface of the first DUT node.
*** Test Cases ***
+# TODO: Remove "continue on failure" once VPP bugs (VPP-132, VPP-333) are fixed.
| Honeycomb configures and reads interface state
| | [Documentation] | Check if Honeycomb API can modify the admin state of\
| | ... | VPP interfaces.
-| | Given Interface state is | ${node} | ${interface} | down
+| | Given Interface State Is | ${node} | ${interface} | down
| | When Honeycomb sets interface state | ${node} | ${interface} | up
| | Then Interface state from Honeycomb should be
| | ... | ${node} | ${interface} | up
| | ... | ${ipv4_address} | ${ipv4_mask} | ${ipv4_settings}
| | And Honeycomb adds interface ipv4 neighbor
| | ... | ${node} | ${interface} | @{ipv4_neighbor}
-| | Then IPv4 config from Honeycomb should be
+| | Run Keyword And Continue On Failure
+| | ... | Then IPv4 config from Honeycomb should be
| | ... | ${node} | ${interface} | ${ipv4_address} | ${ipv4_prefix}
| | ... | @{ipv4_neighbor} | ${ipv4_settings}
-| | And IPv4 config from VAT should be
+| | Run Keyword And Continue On Failure
+| | ... | And IPv4 config from VAT should be
| | ... | ${node} | ${interface} | ${ipv4_address} | ${ipv4_prefix}
| Honeycomb removes ipv4 address from interface
| | [Documentation] | Check if Honeycomb API can remove configured ipv4\
| | ... | addresses from interface.
-| | Given IPv4 config from Honeycomb should be
+| | Run Keyword And Continue On Failure
+| | ... | Given IPv4 config from Honeycomb should be
| | ... | ${node} | ${interface} | ${ipv4_address} | ${ipv4_prefix}
| | ... | @{ipv4_neighbor} | ${ipv4_settings}
-| | And IPv4 config from VAT should be
+| | Run Keyword And Continue On Failure
+| | ... | And IPv4 config from VAT should be
| | ... | ${node} | ${interface} | ${ipv4_address} | ${ipv4_prefix}
| | When Honeycomb removes interface ipv4 addresses | ${node} | ${interface}
-| | Then IPv4 address from Honeycomb should be empty | ${node} |${interface}
+| | Then IPv4 address from Honeycomb should be empty | ${node} | ${interface}
| | And ipv4 address from VAT should be empty | ${node} | ${interface}
| Honeycomb modifies interface configuration - ipv4 (prefix)
| | ... | ${ipv4_settings}
| | And Honeycomb adds interface ipv4 neighbor
| | ... | ${node} | ${interface} | @{ipv4_neighbor}
-| | Then IPv4 config from Honeycomb should be
+| | Run Keyword And Continue On Failure
+| | ... | Then IPv4 config from Honeycomb should be
| | ... | ${node} | ${interface} | ${ipv4_address2} | ${ipv4_prefix}
| | ... | @{ipv4_neighbor}
| | ... | ${ipv4_settings}
-| | And IPv4 config from VAT should be
+| | Run Keyword And Continue On Failure
+| | ... | And IPv4 config from VAT should be
| | ... | ${node} | ${interface} | ${ipv4_address2} | ${ipv4_prefix}
| Honeycomb modifies interface configuration - ipv6
| | When Honeycomb sets interface ipv6 configuration
| | ... | ${node} | ${interface} | @{ipv6_address} | @{ipv6_neighbor}
| | ... | ${ipv6_settings}
-| | Then IPv6 config from Honeycomb should be
+| | Run Keyword And Continue On Failure
+| | ... | Then IPv6 config from Honeycomb should be
| | ... | ${node} | ${interface} | @{ipv6_address} | @{ipv6_neighbor}
| | ... | ${ipv6_settings}
-| | And IPv6 config from VAT should be
+| | Run Keyword And Continue On Failure
+| | ... | And IPv6 config from VAT should be
| | ... | ${node} | ${interface} | @{ipv6_address}
| Honeycomb modifies interface configuration - ethernet,routing
*** Settings ***
| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
| Resource | resources/libraries/robot/honeycomb/interfaces.robot
| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot
-| Suite Teardown | Honeycomb removes all bridge domains | ${node}
+| Suite Teardown | Run keywords
+| ... | Run Keyword If Any Tests Failed
+| ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
+| ... | AND | Honeycomb removes all bridge domains | ${node}
| Force Tags | honeycomb_sanity
| Documentation | *Honeycomb bridge domain management test suite.*
| ...
*** Settings ***
| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
| Resource | resources/libraries/robot/honeycomb/interfaces.robot
| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot
| Resource | resources/libraries/robot/honeycomb/l2_fib.robot
-| Variables | resources/test_data/honeycomb/l2_fib.py
+| Variables | resources/test_data/honeycomb/l2_fib.py | ${node} | ${interface}
+| ... | ${interface2}
| Documentation | *Honeycomb L2 FIB management test suite.*
| Suite Setup | Run keywords
| ... | Set test interface down
| ... | AND
| ... | Honeycomb removes all bridge domains | ${node}
-| Suite Teardown | Honeycomb removes all bridge domains | ${node}
+| Suite Teardown | Run keywords
+| ... | Run Keyword If Any Tests Failed
+| ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
+| ... | AND | Honeycomb removes all bridge domains | ${node}
| Force tags | honeycomb_sanity
*** Variables ***
# Interface to run tests on.
| ${interface}= | ${node['interfaces']['port1']['name']}
+| ${interface2}= | ${node['interfaces']['port3']['name']}
*** Test Cases ***
| Honeycomb adds L2 FIB entry (forward)
*** Settings ***
| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
| Resource | resources/libraries/robot/honeycomb/interfaces.robot
| Resource | resources/libraries/robot/honeycomb/vxlan.robot
# import additional VxLAN settings from resource file
| Variables | resources/test_data/honeycomb/vxlan.py
| Force Tags | honeycomb_sanity
+| Suite Teardown | Run Keyword If Any Tests Failed
+| ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
| Documentation | *Honeycomb VxLAN management test suite.*
| ...
| ... | Test suite uses the first interface of the first DUT node.
*** Settings ***
| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
| Resource | resources/libraries/robot/honeycomb/interfaces.robot
| Resource | resources/libraries/robot/honeycomb/vxlan_gpe.robot
# Import additional VxLAN GPE settings from resource file
| Variables | resources/test_data/honeycomb/vxlan_gpe.py
| Documentation | *Honeycomb VxLAN-GPE management test suite.*
| Force Tags | honeycomb_sanity
+| Suite Teardown | Run Keyword If Any Tests Failed
+| ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
*** Test Cases ***
+# TODO: Remove "continue on failure" once VPP bugs (VPP-217, VPP-156) are fixed.
| Honeycomb creates VxLAN GPE tunnel
-| | [Documentation] | Check if Honeycomb API can configure VxLAN GPE tunnel.
+| | [Documentation] | Check if Honeycomb API can configure a VxLAN GPE tunnel.
| | ...
| | Given interface configuration from Honeycomb should be empty
| | ... | ${node} | ${vxlan_gpe_if1}
| | When Honeycomb creates VxLAN GPE interface
| | ... | ${node} | ${vxlan_gpe_if1}
| | ... | ${vxlan_gpe_base_settings} | ${vxlan_gpe_settings}
-| | Then run keyword and continue on failure
-| | ... | VxLAN GPE configuration from Honeycomb should be
+| | Then VxLAN GPE configuration from Honeycomb should be
| | ... | ${node} | ${vxlan_gpe_if1}
| | ... | ${vxlan_gpe_base_settings} | ${vxlan_gpe_settings}
| | And run keyword and continue on failure
| | ... | VxLAN GPE configuration from VAT should be
| | ... | ${node} | ${vxlan_gpe_if1} | ${vxlan_gpe_settings}
-| | And run keyword and continue on failure
-| | ... | VxLAN GPE Interface indices from Honeycomb and VAT should correspond
+| | And VxLAN GPE Interface indices from Honeycomb and VAT should correspond
| | ... | ${node} | ${vxlan_gpe_if1}
| Honeycomb removes VxLAN GPE tunnel
| | [Documentation] | Check if Honeycomb API can remove VxLAN GPE tunnel.
| | ...
-# Disabled beacuse of bug in Honeycomb.
-# TODO: Enable when fixed.
-#| | Given VxLAN GPE configuration from Honeycomb should be
-#| | ... | ${node} | ${vxlan_gpe_if1}
-#| | ... | ${vxlan_gpe_base_settings} | ${vxlan_gpe_settings}
-#| | And VxLAN GPE configuration from VAT should be
-#| | ... | ${node} | ${vxlan_gpe_if1} | ${vxlan_gpe_settings}
+| | Run Keyword And Continue On Failure
+| | ... | Given VxLAN GPE configuration from Honeycomb should be
+| | ... | ${node} | ${vxlan_gpe_if1}
+| | ... | ${vxlan_gpe_base_settings} | ${vxlan_gpe_settings}
+| | Run Keyword And Continue On Failure
+| | ... | And VxLAN GPE configuration from VAT should be
+| | ... | ${node} | ${vxlan_gpe_if1} | ${vxlan_gpe_settings}
| | When Honeycomb removes VxLAN GPE interface
| | ... | ${node} | ${vxlan_gpe_if1}
-| | Then VxLAN GPE configuration from VAT should be empty
-| | ... | ${node}
-| | And VxLAN GPE configuration from Honeycomb should be
+| | Then VxLAN GPE configuration from Honeycomb should be empty
| | ... | ${node} | ${vxlan_gpe_if1}
-| | ... | ${vxlan_gpe_disabled_base_settings} | ${vxlan_gpe_settings}
+| | And VxLAN GPE configuration from VAT should be empty
+| | ... | ${node}
| Honeycomb sets wrong interface type while creating VxLAN GPE tunnel
| | [Documentation] | Check if Honeycomb refuses to create a VxLAN GPE tunnel\
| | ... | ${node}
| Honeycomb creates VxLAN GPE tunnel with ipv6
-| | [Documentation] | Check if Honeycomb API can configure VxLAN GPE tunnel\
+| | [Documentation] | Check if Honeycomb API can configure a VxLAN GPE tunnel\
| | ... | with IPv6 addresses.
| | ...
| | Given VxLAN GPE configuration from VAT should be empty
| | ... | ${node}
-# Disabled beacuse of bug in Honeycomb
-# TODO: Enable when fixed.
-#| | And VxLAN GPE configuration from Honeycomb should be
-#| | ... | ${node} | ${vxlan_gpe_if5}
-#| | ... | ${vxlan_gpe_disabled_base_settings} | ${vxlan_gpe_settings}
+| | And VxLAN GPE configuration from Honeycomb should be empty
+| | ... | ${node} | ${vxlan_gpe_if5}
| | When Honeycomb creates VxLAN GPE interface
| | ... | ${node} | ${vxlan_gpe_if5}
| | ... | ${vxlan_gpe_base_ipv6_settings} | ${vxlan_gpe_ipv6_settings}
-| | Then run keyword and continue on failure
-| | ... | VxLAN GPE configuration from Honeycomb should be
+| | Then VxLAN GPE configuration from Honeycomb should be
| | ... | ${node} | ${vxlan_gpe_if5}
| | ... | ${vxlan_gpe_base_ipv6_settings} | ${vxlan_gpe_ipv6_settings}
-| | And run keyword and continue on failure
+| | And Run Keyword And Continue On Failure
| | ... | VxLAN GPE configuration from VAT should be
| | ... | ${node} | ${vxlan_gpe_if5} | ${vxlan_gpe_ipv6_settings}
-| | And run keyword and continue on failure
-| | ... | VxLAN GPE Interface indices from Honeycomb and VAT should correspond
+| | And VxLAN GPE Interface indices from Honeycomb and VAT should correspond
| | ... | ${node} | ${vxlan_gpe_if5}
-| Honeycomb creates the second VxLAN GPE tunnel with ipv6
-| | [Documentation] | Check if Honeycomb API can configure another one VxLAN\
+| Honeycomb creates a second VxLAN GPE tunnel with ipv6
+| | [Documentation] | Check if Honeycomb API can configure another VxLAN\
| | ... | GPE tunnel with IPv6 addresses.
| | ...
| | Given interface configuration from Honeycomb should be empty
| | When Honeycomb creates VxLAN GPE interface
| | ... | ${node} | ${vxlan_gpe_if6}
| | ... | ${vxlan_gpe_base_ipv6_settings2} | ${vxlan_gpe_ipv6_settings2}
-| | Then run keyword and continue on failure
-| | ... | VxLAN GPE configuration from Honeycomb should be
+| | Then VxLAN GPE configuration from Honeycomb should be
| | ... | ${node} | ${vxlan_gpe_if6}
| | ... | ${vxlan_gpe_base_ipv6_settings2} | ${vxlan_gpe_ipv6_settings2}
| | And run keyword and continue on failure
| | ... | VxLAN GPE configuration from VAT should be
| | ... | ${node} | ${vxlan_gpe_if6} | ${vxlan_gpe_ipv6_settings2}
-| | And run keyword and continue on failure
-| | ... | VxLAN GPE Interface indices from Honeycomb and VAT should correspond
+| | And VxLAN GPE Interface indices from Honeycomb and VAT should correspond
| | ... | ${node} | ${vxlan_gpe_if6}
*** Settings ***
| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
| Resource | resources/libraries/robot/honeycomb/interfaces.robot
| Resource | resources/libraries/robot/honeycomb/tap.robot
| Force Tags | honeycomb_sanity
+| Suite Teardown | Run Keyword If Any Tests Failed
+| ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
| Documentation | *Honeycomb TAP management test suite.*
| ...
| ... | Test suite uses the first interface of the first DUT node.
*** Settings ***
| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
| Resource | resources/libraries/robot/honeycomb/vhost_user.robot
| Force Tags | honeycomb_sanity
+| Suite Teardown | Run Keyword If Any Tests Failed
+| ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
| Documentation | *Honeycomb vhost-user interface management test suite.*
| ...
| ... | This test suite tests if it is posible to create, modify and\
*** Settings ***
| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
| Resource | resources/libraries/robot/honeycomb/sub_interface.robot
| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot
| Resource | resources/libraries/robot/honeycomb/interfaces.robot
| Variables | resources/test_data/honeycomb/sub_interfaces.py
-| Suite Teardown | Honeycomb removes all bridge domains | ${node}
+| Suite Teardown | Run keywords
+| ... | Run Keyword If Any Tests Failed
+| ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
+| ... | AND | Honeycomb removes all bridge domains | ${node}
| Force Tags | honeycomb_sanity
| Documentation | *Honeycomb sub-interface management test suite.*
| ...
| Honycomb creates sub-interface
| | [Documentation] | Check if Honeycomb creates a sub-interface.
| | ...
-| | Given interface state is | ${node} | ${super_if} | down
+| | Given Interface State Is | ${node} | ${super_if} | down
| | And sub-interface configuration from Honeycomb should be empty
| | ... | ${node} | ${super_if} | ${sub_if_id}
| | And interface configuration from VAT should be empty
| | ... | ${node} | ${sub_if_name}
| | ... | ${ipv4['address']} | ${ipv4['prefix-length']}
+#TODO: Remove "continue on failure" once VPP bug VPP-132 is fixed.
| Honeycomb removes sub-interface ipv4 address
| | [Documentation] | Check if Honeycomb can remove configured ipv4 addresses\
| | ... | from the sub-interface.
| | Given sub-interface ipv4 address from Honeycomb should be
| | ... | ${node} | ${super_if} | ${sub_if_id}
| | ... | ${ipv4['address']} | ${ipv4['prefix-length']}
-| | And sub-interface ipv4 address from VAT should be
+| | Run Keyword And Continue On Failure
+| | ... | And sub-interface ipv4 address from VAT should be
| | ... | ${node} | ${sub_if_name}
| | ... | ${ipv4['address']} | ${ipv4['prefix-length']}
| | When Honeycomb removes all sub-interface ipv4 addresses
*** Settings ***
| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
| Resource | resources/libraries/robot/honeycomb/netconf.robot
| Variables | resources/test_data/honeycomb/netconf/triggers.py
| Documentation | *Netconf test suite. Contains test cases that need to bypass\
| ... | REST API.*
| Force Tags | honeycomb_sanity
+| Suite Teardown | Run Keyword If Any Tests Failed
+| ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
*** Test Cases ***
| Honeycomb can create and delete interfaces
*** Settings ***
| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
| Resource | resources/libraries/robot/honeycomb/interfaces.robot
| Resource | resources/libraries/robot/honeycomb/tap.robot
| Resource | resources/libraries/robot/honeycomb/notifications.robot
| ... | ${node} | ${tap_interface} | ${tap_settings}
| Documentation | *Honeycomb notifications test suite.*
| Force Tags | honeycomb_sanity
+| Suite Teardown | Run Keyword If Any Tests Failed
+| ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
*** Test Cases ***
| Honeycomb sends notification on interface state change
# See the License for the specific language governing permissions and
# limitations under the License.
-*** Variables***
+*** Variables ***
# Interface to run tests on.
| ${interface}= | ${node['interfaces']['port1']['name']}
*** Settings ***
| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
| Resource | resources/libraries/robot/honeycomb/access_control_lists.robot
| Variables | resources/test_data/honeycomb/acl.py
-| Suite Teardown | Clear all ACL settings | ${node}
+| Suite Teardown | Run keywords
+| ... | Run Keyword If Any Tests Failed
+| ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
+| ... | AND | Clear all ACL settings | ${node}
| Documentation | *Honeycomb access control lists test suite.*
| Force Tags | Honeycomb_sanity
*** Settings ***
| Resource | resources/libraries/robot/default.robot
| Resource | resources/libraries/robot/honeycomb/persistence.robot
-| Suite Setup | Restart Honeycomb and VPP and clear persisted configuration
+| Suite Setup | Restart Honeycomb And VPP And Clear Persisted Configuration
| ... | ${node}
-| Force Tags | honeycomb_persistence
+| Force Tags | honeycomb_sanity
| Documentation | *Honeycomb configuration persistence test suite.*
*** Test Cases ***
| | [Documentation] | Checks if Honeycomb reverts to default configuration when\
| | ... | persistence files are damaged or invalid.
| | [Teardown] | Run keyword if test failed
-| | ... | Restart both systems and clear persisted configuration | ${node}
+| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
| | Given Honeycomb and VPP should not have default configuration | ${node}
| | When Persistence file is damaged during restart | ${node}
| | Then Honeycomb and VPP should have default configuration | ${node}
-
-*** Keywords ***
-| Restart Honeycomb and VPP and clear persisted configuration
-| | [Documentation] | Restarts Honeycomb and VPP with default configuration.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | Restart both systems and clear persisted configuration \
-| | ... | \| ${nodes['DUT1']} \|
-| | [Arguments] | ${node}
-| | Stop Honeycomb service on DUTs | ${node}
-| | Clear persisted Honeycomb configuration | ${node}
-| | Setup DUT | ${node}
-| | Setup Honeycomb service on DUTs | ${node}
\ No newline at end of file
| ${node}= | ${nodes['DUT1']}
*** Settings ***
-| Library | resources.libraries.python.honeycomb.HcPersistence
+| Library | resources/libraries/python/honeycomb/HcPersistence.py
| Resource | resources/libraries/robot/default.robot
| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
-| Suite Setup | Run keywords | Setup all DUTs before test | AND
-| ... | Clear persisted Honeycomb configuration | ${node} | AND
-| ... | Setup Honeycomb service on DUTs | ${node} | AND
+| Suite Setup | Run Keywords | Setup All DUTs Before Test | AND
+| ... | Clear Persisted Honeycomb Configuration | ${node} | AND
+| ... | Configure Unsecured Access | ${node} | AND
+| ... | Setup Honeycomb Service On DUTs | ${node} | AND
| ... | Set Global Variable | ${node}
-| Suite Teardown | Stop Honeycomb service on DUTs | ${node}
+| Suite Teardown | Stop Honeycomb Service On DUTs | ${node}
Code Review / csit.git / commitdiff