CSIT Report update

Change-Id: I42efd42ec577723ef2b17a1753ae744986bb66ff
Signed-off-by: Peter Mikus <pmikus@cisco.com>

diff --git a/docs/report/csit_framework_documentation/csit_design.rst b/docs/report/csit_framework_documentation/csit_design.rst
index d8ea2c8..fef0285 100644 (file)
--- a/docs/report/csit_framework_documentation/csit_design.rst
+++ b/docs/report/csit_framework_documentation/csit_design.rst
@@ -107,6 +107,8 @@ A brief bottom-up description is provided here:
      - VPP;
      - DPDK-Testpmd;
      - DPDK-L3Fwd;
+     - Honeycomb;
+     - VPP Container orchestrated topologies;
 
    - Tools:
 

diff --git a/docs/report/dpdk_performance_tests/overview.rst b/docs/report/dpdk_performance_tests/overview.rst
index 6af7fe9..a61d853 100644 (file)
--- a/docs/report/dpdk_performance_tests/overview.rst
+++ b/docs/report/dpdk_performance_tests/overview.rst
@@ -215,7 +215,7 @@ TRex is installed and run on the TG compute node. The typical procedure is:
 - TRex is started in the background mode
   ::
 
-  $ sh -c 'cd /opt/trex-core-2.25/scripts/ && sudo nohup ./t-rex-64 -i -c 7 --iom 0 > /dev/null 2>&1 &' > /dev/null
+  $ sh -c 'cd <t-rex-install-dir>/scripts/ && sudo nohup ./t-rex-64 -i -c 7 --iom 0 > /tmp/trex.log 2>&1 &' > /dev/null
 
 - There are traffic streams dynamically prepared for each test, based on traffic
   profiles. The traffic is sent and the statistics obtained using

diff --git a/docs/report/introduction/general_notes.rst b/docs/report/introduction/general_notes.rst
index 461e186..5213a6a 100644 (file)
--- a/docs/report/introduction/general_notes.rst
+++ b/docs/report/introduction/general_notes.rst
@@ -31,18 +31,17 @@ is listed separately, as follows:
    side). Tested across a range of multi-thread and multi-core
    configurations. TRex is used as a traffic generator.
 
-#. **Container Topologies Orchestrated by K8s - Performance** - CSIT
-   |release| introduced new tests of Container topologies connected over
-   the memif virtual interface (shared memory interface). For these tests
-   VPP vswitch instance runs in a Docker Container handling Intel x520 NIC
-   10GbE interfaces and connecting over memif (Master side) virtual
-   interfaces to more instances of VPP running in Docker Containers with
-   memif virtual interfaces (Slave side). All containers are orchestrated
-   by Kubernetes, with Ligato for container networking. TRex is used as a
-   traffic generator.
+#. **Container Topologies Orchestrated by K8s - Performance** - CSIT Container
+   topologies connected over the memif virtual interface (shared memory
+   interface). For these tests VPP vswitch instance runs in a Docker Container
+   handling Intel x520 NIC 10GbE interfaces and connecting over memif (Master
+   side) virtual interfaces to more instances of VPP running in Docker
+   Containers with memif virtual interfaces (Slave side). All containers are
+   orchestrated by Kubernetes, with `Ligato <https://github.com/ligato>`_ for
+   container networking. TRex is used as a traffic generator.
 
 #. **DPDK Performance** - VPP is using DPDK code to control and drive
-   the NICs and physical interfaces. Testpmd tests are used as a baseline to
+   the NICs and physical interfaces. Tests are used as a baseline to
    profile the DPDK sub-system of VPP. DPDK performance tests executed in
    physical FD.io testbeds, focusing on Testpmd/L3FWD data plane performance for
    Phy-to-Phy (NIC-to-NIC). Tests cover a range of NICs, 10GE and 40GE

diff --git a/docs/report/vpp_performance_tests/csit_release_notes.rst b/docs/report/vpp_performance_tests/csit_release_notes.rst
index 3ee4ff3..d029bd0 100644 (file)
--- a/docs/report/vpp_performance_tests/csit_release_notes.rst
+++ b/docs/report/vpp_performance_tests/csit_release_notes.rst
@@ -6,41 +6,40 @@ Changes in CSIT |release|
 \r
 #. Added VPP performance tests\r
 \r
-   - **L2BD MAC scale tests**\r
+   - **Container Topologies Orchestrated by K8s with VPP memif tests**\r
 \r
-     - VPP L2 Bridge-Domain with MAC learning and large size L2FIB (10k,\r
-       100k, 1M MACs), tested in NIC-to-NIC and VM vhost topologies.\r
+     - Added tests with VPP in L2 Cross-Connect and Bridge-Domain configurations\r
+       connecting over memif virtual interfaces VPPs running in Docker\r
+       containers, with service chain topologies orchestrated by Kubernetes.\r
+       Chained, horizontal and standalone linked topologies added;\r
 \r
-   - **Linux Container VPP memif tests**\r
+   - **VPP TCP/IP stack**\r
 \r
-     - Tests with VPP in L2 Bridge-Domain configuration connecting over\r
-       memif virtual interfaces to VPPs running in LXCs;\r
+     - Added tests with VPP builtin TCP based HTTP server. WRK traffic generator\r
+       is used.\r
 \r
-   - **Docker Container VPP memif tests**\r
+   - **SRv6 tests**\r
 \r
-     - Tests with VPP in L2 Cross-Connect configuration connecting over\r
-       memif virtual interfaces VPPs running in Docker containers;\r
+     - [placeholder]\r
 \r
-   - **Container Topologies Orchestrated by K8s with VPP memif tests**\r
+   - **IPSecSW tests**\r
 \r
-     - Tests with VPP in L2 Cross-Connect and Bridge-Domain configurations\r
-       connecting over memif virtual interfaces VPPs running in Docker\r
-       containers, with service chain topologies orchestrated by Kubernetes;\r
+     - SW computed IPSec encryption with AES-GCM, CBC-SHA1 ciphers, in\r
+       combination with IPv4 routed-forwarding.\r
 \r
-   - **Stateful Security Groups**\r
+#. Presentation and Analytics Layer\r
 \r
-     - m-thread m-core VPP stateful and stateless security-groups tests;\r
+     - Added multi-core scale-up analysis into Presentation and Analytics Layer\r
+       (PAL) for automated CSIT test results analysis;\r
 \r
-   - **MAC-IP binding**\r
 \r
-     - MACIP input access-lists, single-thread single-core and m-thread\r
-       m-core tests;\r
+#. Other improvements\r
 \r
-#. Presentation and Analytics Layer\r
+     - **Framework optimizations**\r
+\r
+       - Ability to run CSIT framework on ARM architecture.\r
 \r
-     - New Presentation and Analytics Layer (PAL) for automated CSIT test\r
-       results analysis and presentation, including statistical analysis\r
-       of results repeatibility and test report auto-generation;\r
+       - Overall stability improvements.\r
 \r
 Performance Improvements\r
 ------------------------\r
@@ -205,7 +204,7 @@ Here is the list of known issues in CSIT |release| for VPP performance tests:
 | 1 | Vic1385 and Vic1227 low performance.            | VPP-664    | Low NDR performance.                                            |\r
 |   |                                                 |            |                                                                 |\r
 +---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
-| 2 | Sporadic NDR discovery test failures on x520.   | CSIT-750   | Suspected issue with HW settings (BIOS, FW) in LF               |\r
+| 2 | Sporadic NDR discovery test failures on x520.   | CSIT-750   | Suspected issue with HW combination of X710-X520 in LF          |\r
 |   |                                                 |            | infrastructure. Issue can't be replicated outside LF.           |\r
 +---+-------------------------------------------------+------------+-----------------------------------------------------------------+\r
 | 3 | VPP in 2t2c setups - large variation            | CSIT-568   | Suspected NIC firmware or DPDK driver issue affecting NDR       |\r

diff --git a/docs/report/vpp_performance_tests/documentation/containers.rst b/docs/report/vpp_performance_tests/documentation/containers.rst
index d3eeb71..a617386 100644 (file)
--- a/docs/report/vpp_performance_tests/documentation/containers.rst
+++ b/docs/report/vpp_performance_tests/documentation/containers.rst
@@ -140,11 +140,8 @@ a range of virtual networking topologies.
   of functionality is better supported in LXC 2.1 but can be done is current
   version as well.
 
-**Open Questions**
-
-- CSIT code is currently using cgroup to pin lxc data plane thread to
-  cpu cores after lxc container is created. In the future may find a
-  more universal way to do it.
+- CSIT code is currently using cgroup control the range of CPU cores the
+  container must run on. VPP thread pinning defined vpp startup.conf.
 
 Docker
 ~~~~~~
@@ -166,7 +163,6 @@ containerized applications used in CSIT performance tests.
   configuration file controls the range of CPU cores the Docker image
   must run on. VPP thread pinning defined vpp startup.conf.
 
-
 Kubernetes
 ~~~~~~~~~~
 
@@ -180,11 +176,6 @@ K8s pod definitions including compute resource allocation is provided in
 CSIT uses K8s and its infrastructure components like etcd to control all
 phases of container based virtualized network topologies.
 
-**Known Issues**
-
-- Unable to properly pin k8s pods and containers to cpu cores. This will be
-  addressed in Kubernetes 1.8+ in alpha testing.
-
 **Open Questions**
 
 - Clarify the functions provided by Contiv and Calico in Ligato system?
@@ -201,7 +192,7 @@ using goVPP [govpp]_ and vpp-agent [vpp-agent]_.
 **Open Questions**
 
 - Currently using a separate LF Jenkins job for building csit-centric
-  vpp_agent docker images vs. dockerhub/ligato ones.
+  prod_vpp_agent docker images vs. dockerhub/ligato ones.
 
 Implementation
 --------------
@@ -286,9 +277,6 @@ Current CSIT implementation is illustrated using UML Class diagram:
 
 Sequentional diagram that illustrates the creation of a single container.
 
-.. mk: what "RF KW" is meant below?
-.. mk: the flow sequence should adhere to the lifecycle events listed earlier in this doc.
-
 ::
 
  Legend:
@@ -415,7 +403,7 @@ Kubernetes is implemented as separate library ``KubernetesUtils.py``,
 with a class with the same name. This utility provides an API for L2
 Robot Keywords to control ``kubectl`` installed on each of DUTs. One
 time initialization script, ``resources/libraries/bash/k8s_setup.sh``
-does reset/init kubectl, applies Calico v2.4.1 and initializes the
+does reset/init kubectl, applies Calico v2.6.3 and initializes the
 ``csit`` namespace. CSIT namespace is required to not to interfere with
 existing setups and it further simplifies apply/get/delete
 Pod/ConfigMap operations on SUTs.
@@ -475,10 +463,12 @@ We created separate sets of Jenkins jobs, that will be executing following:
 
 1. Clone latest CSIT and Ligato repositaries.
 2. Pull specific version of ``dev_vpp_agent`` image from Dockerhub.
-3. Build ``prod_vpp_image`` Docker image from ``dev_vpp_agent`` image.
-4. Shrink image using ``docker/dev_vpp_agent/shrink.sh`` script.
-5. Transfer ``prod_vpp_agent_shrink`` image to DUTs.
-6. Execute subset of performance tests designed for Ligato testing.
+3. Extract VPP API (from ``.deb`` package) and copy into ``dev_vpp_agent``
+   image
+4. Rebuild vpp-agent and extract outside image.
+5. Build ``prod_vpp_image`` Docker image from ``dev_vpp_agent`` image.
+6. Transfer ``prod_vpp_agent`` image to DUTs.
+7. Execute subset of performance tests designed for Ligato testing.
 
 ::
 
@@ -491,7 +481,7 @@ We created separate sets of Jenkins jobs, that will be executing following:
  |               ligato/dev_vpp_agent            <------| Pull this image from
  +------------------------^----------------------+      | Dockerhub ligato/dev_vpp_agent:<version>
                           |
-                          | Extract agent.tar.gz from dev_vpp_agent
+                          | Rebuild and extract agent.tar.gz from dev_vpp_agent
  +------------------------+----------------------+
  |                 prod_vpp_agent                <------| Build by passing own
  +-----------------------------------------------+      | vpp.tar.gz (from nexus
@@ -505,10 +495,8 @@ Approximate size of vnf-agent docker images:
 ::
 
   REPOSITORY            TAG       IMAGE ID        CREATED        SIZE
-  dev_vpp_agent         latest    442771972e4a    8 hours ago    3.57 GB
-  dev_vpp_agent_shrink  latest    bd2e76980236    8 hours ago    1.68 GB
-  prod_vpp_agent        latest    e33a5551b504    2 days ago     404 MB
-  prod_vpp_agent_shrink latest    446b271cce26    2 days ago     257 MB
+  dev-vpp-agent         latest    78c53bd57e2     6 weeks ago    9.79GB
+  prod_vpp_agent        latest    f68af5afe601    5 weeks ago    443MB
 
 In CSIT we need to create separate performance suite under
 ``tests/kubernetes/perf`` which contains modified Suite setup in comparison

diff --git a/docs/report/vpp_performance_tests/overview.rst b/docs/report/vpp_performance_tests/overview.rst
index 8692b8b..38e76d2 100644 (file)
--- a/docs/report/vpp_performance_tests/overview.rst
+++ b/docs/report/vpp_performance_tests/overview.rst
@@ -54,7 +54,7 @@ performance labs to address larger scale multi-interface and multi-NIC
 performance testing scenarios.
 
 For test cases that require DUT (VPP) to communicate with
-VirtualMachines (VMs) / Containers (Linux or Docker Containers) over
+VirtualMachines (VMs) / Linux or Docker Containers (Ctrs) over
 vhost-user/memif interfaces, N of VM/Ctr instances are created on SUT1
 and SUT2. For N=1 DUT forwards packets between vhost/memif and physical
 interfaces. For N>1 DUT a logical service chain forwarding topology is
@@ -175,10 +175,14 @@ CSIT |release| includes following performance test suites, listed per NIC type:
   - **VMs with vhost-user** - virtual topologies with 1 VM and service chains
     of 2 VMs using vhost-user interfaces, with VPP forwarding modes incl. L2
     Cross-Connect, L2 Bridge-Domain, VXLAN with L2BD, IPv4 routed-forwarding.
-  - **IPSec** - IPSec encryption with AES-GCM, CBC-SHA1 ciphers, in combination
-    with IPv4 routed-forwarding.
+  - **IPSecSW** - IPSec encryption with AES-GCM, CBC-SHA1 ciphers, in
+    combination with IPv4 routed-forwarding.
+  - **IPSecHW** - IPSec encryption with AES-GCM, CBC-SHA1 ciphers, in
+    combination with IPv4 routed-forwarding. Intel QAT HW acceleration.
   - **IPSec+LISP** - IPSec encryption with CBC-SHA1 ciphers, in combination
     with LISP-GPE overlay tunneling for IPv4-over-IPv4.
+  - **VPP TCP/IP stack** - VPP builtin TCP based HTTP server. WRK traffic
+    generator is used.
 
 - 2port10GE X710 Intel
 
@@ -399,7 +403,7 @@ TRex is installed and run on the TG compute node. The typical procedure is:
 - TRex is started in the background mode
   ::
 
-  $ sh -c 'cd /opt/trex-core-2.25/scripts/ && sudo nohup ./t-rex-64 -i -c 7 --iom 0 > /dev/null 2>&1 &' > /dev/null
+  $ sh -c 'cd <t-rex-install-dir>/scripts/ && sudo nohup ./t-rex-64 -i -c 7 --iom 0 > /tmp/trex.log 2>&1 &' > /dev/null
 
 - There are traffic streams dynamically prepared for each test, based on traffic
   profiles. The traffic is sent and the statistics obtained using

diff --git a/docs/report/vpp_performance_tests/test_environment.rst b/docs/report/vpp_performance_tests/test_environment.rst
index 48d45e5..5090530 100644 (file)
--- a/docs/report/vpp_performance_tests/test_environment.rst
+++ b/docs/report/vpp_performance_tests/test_environment.rst
@@ -328,7 +328,9 @@ Below a subset of the running configuration:
     adduser: 3.113+nmu3ubuntu4\r
     apparmor: 2.10.95-0ubuntu2.6\r
     apt: 1.2.12~ubuntu16.04.1\r
+    apt-transport-https: 1.2.24\r
     apt-utils: 1.2.12~ubuntu16.04.1\r
+    aufs-tools: 1:3.2+20130722-1.1ubuntu1\r
     autoconf: 2.69-9\r
     automake: 1:1.15-4ubuntu1\r
     autotools-dev: 20150820.1\r
@@ -342,6 +344,8 @@ Below a subset of the running configuration:
     busybox-initramfs: 1:1.22.0-15ubuntu1\r
     busybox-static: 1:1.22.0-15ubuntu1\r
     bzip2: 1.0.6-8\r
+    busybox-static: 1:1.22.0-15ubuntu1\r
+    bzip2: 1.0.6-8\r
     ca-certificates: 20160104ubuntu1\r
     ca-certificates-java: 20160321\r
     cgroup-bin: 0.41-7ubuntu1\r
@@ -350,6 +354,7 @@ Below a subset of the running configuration:
     cloud-image-utils: 0.27-0ubuntu24\r
     console-setup: 1.108ubuntu15.2\r
     console-setup-linux: 1.108ubuntu15.2\r
+    corekeeper: 1.6\r
     coreutils: 8.25-2ubuntu2\r
     cpio: 2.11+dfsg-5ubuntu1\r
     cpp: 4:5.3.1-1ubuntu1\r
@@ -373,23 +378,30 @@ Below a subset of the running configuration:
     dmidecode: 3.0-2ubuntu0.1\r
     dns-root-data: 2015052300+h+1\r
     dnsmasq-base: 2.75-1ubuntu0.16.04.2\r
+    docker-ce: 17.09.0~ce-0~ubuntu\r
     dpkg: 1.18.4ubuntu1.1\r
     dpkg-dev: 1.18.4ubuntu1.1\r
     e2fslibs:amd64: 1.42.13-1ubuntu1\r
     e2fsprogs: 1.42.13-1ubuntu1\r
+    ebtables: 2.0.10.4-3.4ubuntu2\r
     eject: 2.1.5+deb1+cvs20081104-13.1\r
+    ethtool: 1:4.5-1\r
     expect: 5.45-7\r
     fakeroot: 1.20.2-1ubuntu1\r
     file: 1:5.25-2ubuntu1\r
     findutils: 4.6.0+git+20160126-2\r
+    fontconfig: 2.11.94-0ubuntu1.1\r
     fontconfig-config: 2.11.94-0ubuntu1.1\r
     fonts-dejavu-core: 2.35-1\r
+    fonts-dejavu-extra: 2.35-1\r
     g++: 4:5.3.1-1ubuntu1\r
     g++-5: 5.4.0-6ubuntu1~16.04.2\r
     gcc: 4:5.3.1-1ubuntu1\r
     gcc-5: 5.4.0-6ubuntu1~16.04.2\r
     gcc-5-base:amd64: 5.4.0-6ubuntu1~16.04.2\r
     gcc-6-base:amd64: 6.0.1-0ubuntu1\r
+    gdb: 7.11.1-0ubuntu1~16.5\r
+    gdbserver: 7.11.1-0ubuntu1~16.5\r
     genisoimage: 9:1.1.11-3ubuntu1\r
     gettext-base: 0.19.7-2ubuntu3\r
     gir1.2-glib-2.0:amd64: 1.46.0-3ubuntu1\r
@@ -404,6 +416,7 @@ Below a subset of the running configuration:
     grub-pc-bin: 2.02~beta2-36ubuntu3.1\r
     grub2-common: 2.02~beta2-36ubuntu3.1\r
     gzip: 1.6-4ubuntu1\r
+    hicolor-icon-theme: 0.15-0ubuntu1\r
     hostname: 3.16ubuntu2\r
     ifupdown: 0.8.10ubuntu1\r
     init: 1.29ubuntu2\r
@@ -428,6 +441,10 @@ Below a subset of the running configuration:
     klibc-utils: 2.0.4-8ubuntu1.16.04.1\r
     kmod: 22-1ubuntu4\r
     krb5-locales: 1.13.2+dfsg-5\r
+    kubeadm: 1.8.4-00\r
+    kubectl: 1.8.4-00\r
+    kubelet: 1.8.4-00\r
+    kubernetes-cni: 0.5.1-00\r
     language-selector-common: 0.165.3\r
     laptop-detect: 0.13.7ubuntu2\r
     less: 481-2.1\r
@@ -448,6 +465,8 @@ Below a subset of the running configuration:
     libasound2-data: 1.1.0-0ubuntu1\r
     libasprintf0v5:amd64: 0.19.7-2ubuntu3\r
     libasyncns0:amd64: 0.8-5build1\r
+    libatk1.0-0:amd64: 2.18.0-1\r
+    libatk1.0-data: 2.18.0-1\r
     libatm1:amd64: 1:2.5.1-1.5\r
     libatomic1:amd64: 5.4.0-6ubuntu1~16.04.2\r
     libattr1:amd64: 1:2.4.47-2\r
@@ -456,6 +475,8 @@ Below a subset of the running configuration:
     libavahi-client3:amd64: 0.6.32~rc+dfsg-1ubuntu2\r
     libavahi-common-data:amd64: 0.6.32~rc+dfsg-1ubuntu2\r
     libavahi-common3:amd64: 0.6.32~rc+dfsg-1ubuntu2\r
+    libbabeltrace-ctf1:amd64: 1.3.2-1\r
+    libbabeltrace1:amd64: 1.3.2-1\r
     libblkid1:amd64: 2.27.1-6ubuntu3.1\r
     libbluetooth3:amd64: 5.37-0ubuntu5\r
     libboost-iostreams1.58.0:amd64: 1.58.0+dfsg-5ubuntu3.1\r
@@ -466,11 +487,12 @@ Below a subset of the running configuration:
     libbsd0:amd64: 0.8.2-1\r
     libbz2-1.0:amd64: 1.0.6-8\r
     libc-bin: 2.23-0ubuntu3\r
-    libc-dev-bin: 2.23-0ubuntu3\r
-    libc6:amd64: 2.23-0ubuntu3\r
-    libc6-dev:amd64: 2.23-0ubuntu3\r
+    libc-dev-bin: 2.23-0ubuntu9\r
+    libc6-dbg:amd64: 2.23-0ubuntu9\r
+    libc6-dev:amd64: 2.23-0ubuntu9\r
     libcaca0:amd64: 0.99.beta19-2build2~gcc5.2\r
     libcacard0:amd64: 1:2.5.0-2\r
+    libcairo2:amd64: 1.14.6-1\r
     libcap-ng0:amd64: 0.7.7-1\r
     libcap2:amd64: 1:2.24-12\r
     libcap2-bin: 1:2.24-12\r
@@ -482,6 +504,7 @@ Below a subset of the running configuration:
     libcryptsetup4:amd64: 2:1.6.6-5ubuntu2\r
     libcups2:amd64: 2.1.3-4\r
     libcurl3-gnutls:amd64: 7.47.0-1ubuntu2.1\r
+    libdatrie1:amd64: 0.2.10-2\r
     libdb5.3:amd64: 5.3.28-11\r
     libdbus-1-3:amd64: 1.10.6-1ubuntu3\r
     libdbus-glib-1-2:amd64: 0.106-1\r
@@ -515,6 +538,9 @@ Below a subset of the running configuration:
     libgcc1:amd64: 1:6.0.1-0ubuntu1\r
     libgcrypt20:amd64: 1.6.5-2ubuntu0.2\r
     libgdbm3:amd64: 1.8.3-13.1\r
+    libgdk-pixbuf2.0-0:amd64: 2.32.2-1ubuntu1.2\r
+    libgdk-pixbuf2.0-common: 2.32.2-1ubuntu1.2\r
+    libgif7:amd64: 5.1.4-0.3~16.04\r
     libgirepository-1.0-1:amd64: 1.46.0-3ubuntu1\r
     libgl1-mesa-dri:amd64: 11.2.0-1ubuntu2.2\r
     libgl1-mesa-glx:amd64: 11.2.0-1ubuntu2.2\r
@@ -528,13 +554,19 @@ Below a subset of the running configuration:
     libgnutls30:amd64: 3.4.10-4ubuntu1.1\r
     libgomp1:amd64: 5.4.0-6ubuntu1~16.04.2\r
     libgpg-error0:amd64: 1.21-2ubuntu1\r
+    libgraphite2-3:amd64: 1.3.6-1ubuntu1\r
     libgssapi-krb5-2:amd64: 1.13.2+dfsg-5\r
     libgssapi3-heimdal:amd64: 1.7~git20150920+dfsg-4ubuntu1\r
+    libgtk2.0-0:amd64: 2.24.30-1ubuntu1.16.04.2\r
+    libgtk2.0-bin: 2.24.30-1ubuntu1.16.04.2\r
+    libgtk2.0-common: 2.24.30-1ubuntu1.16.04.2\r
+    libharfbuzz0b:amd64: 1.0.1-1ubuntu0.1\r
     libhcrypto4-heimdal:amd64: 1.7~git20150920+dfsg-4ubuntu1\r
     libheimbase1-heimdal:amd64: 1.7~git20150920+dfsg-4ubuntu1\r
     libheimntlm0-heimdal:amd64: 1.7~git20150920+dfsg-4ubuntu1\r
     libhogweed4:amd64: 3.2-1\r
     libhx509-5-heimdal:amd64: 1.7~git20150920+dfsg-4ubuntu1\r
+    libice-dev:amd64: 2:1.0.9-1\r
     libice6:amd64: 2:1.0.9-1\r
     libicu55:amd64: 55.1-7\r
     libidn11:amd64: 1.32-3ubuntu1.1\r
@@ -542,6 +574,7 @@ Below a subset of the running configuration:
     libiscsi2:amd64: 1.12.0-2\r
     libisl15:amd64: 0.16.1-1\r
     libitm1:amd64: 5.4.0-6ubuntu1~16.04.2\r
+    libjbig0:amd64: 2.1-3.1\r
     libjpeg-turbo8:amd64: 1.4.2-0ubuntu3\r
     libjpeg8:amd64: 8c-2ubuntu8\r
     libjson-c2:amd64: 0.11-4ubuntu2\r
@@ -582,6 +615,7 @@ Below a subset of the running configuration:
     libnspr4:amd64: 2:4.12-0ubuntu0.16.04.1\r
     libnss3:amd64: 2:3.23-0ubuntu0.16.04.1\r
     libnss3-nssdb: 2:3.23-0ubuntu0.16.04.1\r
+    libnuma-dev:amd64: 2.0.11-1ubuntu1\r
     libnuma1:amd64: 2.0.11-1ubuntu1\r
     libogg0:amd64: 1.3.2-1\r
     libopus0:amd64: 1.1.2-1ubuntu1\r
@@ -591,6 +625,9 @@ Below a subset of the running configuration:
     libpam-modules-bin: 1.1.8-3.2ubuntu2\r
     libpam-runtime: 1.1.8-3.2ubuntu2\r
     libpam0g:amd64: 1.1.8-3.2ubuntu2\r
+    libpango-1.0-0:amd64: 1.38.1-1\r
+    libpangocairo-1.0-0:amd64: 1.38.1-1\r
+    libpangoft2-1.0-0:amd64: 1.38.1-1\r
     libpcap-dev: 1.7.4-2\r
     libpcap0.8:amd64: 1.7.4-2\r
     libpcap0.8-dev: 1.7.4-2\r
@@ -609,6 +646,7 @@ Below a subset of the running configuration:
     libpolkit-gobject-1-0:amd64: 0.105-14.1\r
     libpopt0:amd64: 1.16-10\r
     libprocps4:amd64: 2:3.3.10-4ubuntu2\r
+    libpthread-stubs0-dev:amd64: 0.3-4\r
     libpulse0:amd64: 1:8.0-0ubuntu3\r
     libpython-all-dev:amd64: 2.7.11-1\r
     libpython-dev:amd64: 2.7.11-1\r
@@ -618,8 +656,9 @@ Below a subset of the running configuration:
     libpython2.7-minimal:amd64: 2.7.12-1~16.04\r
     libpython2.7-stdlib:amd64: 2.7.12-1~16.04\r
     libpython3-stdlib:amd64: 3.5.1-3\r
-    libpython3.5-minimal:amd64: 3.5.2-2~16.01\r
-    libpython3.5-stdlib:amd64: 3.5.2-2~16.01\r
+    libpython3.5:amd64: 3.5.2-2ubuntu0~16.04.1\r
+    libpython3.5-minimal:amd64: 3.5.2-2ubuntu0~16.04.1\r
+    libpython3.5-stdlib:amd64: 3.5.2-2ubuntu0~16.04.1\r
     libquadmath0:amd64: 5.4.0-6ubuntu1~16.04.2\r
     librados2: 10.2.2-0ubuntu0.16.04.2\r
     librbd1: 10.2.2-0ubuntu0.16.04.2\r
@@ -637,6 +676,7 @@ Below a subset of the running configuration:
     libsepol1:amd64: 2.4-2\r
     libsigsegv2:amd64: 2.10-4\r
     libslang2:amd64: 2.3.0-2ubuntu1\r
+    libsm-dev:amd64: 2:1.2.2-1\r
     libsm6:amd64: 2:1.2.2-1\r
     libsmartcols1:amd64: 2.27.1-6ubuntu3.1\r
     libsndfile1:amd64: 1.0.25-10\r
@@ -652,6 +692,9 @@ Below a subset of the running configuration:
     libtext-charwidth-perl: 0.04-7build5\r
     libtext-iconv-perl: 1.7-5build4\r
     libtext-wrapi18n-perl: 0.06-7.1\r
+    libthai-data: 0.1.24-2\r
+    libthai0:amd64: 0.1.24-2\r
+    libtiff5:amd64: 4.0.6-1ubuntu0.2\r
     libtinfo5:amd64: 6.0+20160213-1ubuntu1\r
     libtk8.6:amd64: 8.6.5-1\r
     libtool: 2.4.6-0.1\r
@@ -671,21 +714,29 @@ Below a subset of the running configuration:
     libwrap0:amd64: 7.6.q-25\r
     libx11-6:amd64: 2:1.6.3-1ubuntu2\r
     libx11-data: 2:1.6.3-1ubuntu2\r
+    libx11-dev:amd64: 2:1.6.3-1ubuntu2\r
+    libx11-doc: 2:1.6.3-1ubuntu2\r
     libx11-xcb1:amd64: 2:1.6.3-1ubuntu2\r
+    libxau-dev:amd64: 1:1.0.8-1\r
     libxau6:amd64: 1:1.0.8-1\r
     libxaw7:amd64: 2:1.0.13-1\r
     libxcb-dri2-0:amd64: 1.11.1-1ubuntu1\r
     libxcb-dri3-0:amd64: 1.11.1-1ubuntu1\r
     libxcb-glx0:amd64: 1.11.1-1ubuntu1\r
     libxcb-present0:amd64: 1.11.1-1ubuntu1\r
+    libxcb-render0:amd64: 1.11.1-1ubuntu1\r
     libxcb-shape0:amd64: 1.11.1-1ubuntu1\r
+    libxcb-shm0:amd64: 1.11.1-1ubuntu1\r
     libxcb-sync1:amd64: 1.11.1-1ubuntu1\r
     libxcb1:amd64: 1.11.1-1ubuntu1\r
+    libxcb1-dev:amd64: 1.11.1-1ubuntu1\r
     libxcomposite1:amd64: 1:0.4.4-1\r
+    libxcursor1:amd64: 1:1.1.14-1\r
     libxdamage1:amd64: 1:1.1.4-2\r
+    libxdmcp-dev:amd64: 1:1.1.2-1.1\r
     libxdmcp6:amd64: 1:1.1.2-1.1\r
-    libxen-4.6:amd64: 4.6.0-1ubuntu4.2\r
-    libxenstore3.0:amd64: 4.6.0-1ubuntu4.2\r
+    libxen-4.6:amd64: 4.6.0-1ubuntu4.1\r
+    libxenstore3.0:amd64: 4.6.0-1ubuntu4.1\r
     libxext6:amd64: 2:1.3.3-1\r
     libxfixes3:amd64: 1:5.0.1-2\r
     libxft2:amd64: 2.3.2-1\r
@@ -699,6 +750,7 @@ Below a subset of the running configuration:
     libxrender1:amd64: 1:0.9.9-0ubuntu1\r
     libxshmfence1:amd64: 1.2-1\r
     libxss1:amd64: 1:1.2.2-1\r
+    libxt-dev:amd64: 1:1.1.5-0ubuntu1\r
     libxt6:amd64: 1:1.1.5-0ubuntu1\r
     libxtables11:amd64: 1.6.0-2ubuntu3\r
     libxtst6:amd64: 2:1.2.2-1\r
@@ -743,7 +795,10 @@ Below a subset of the running configuration:
     net-tools: 1.60-26ubuntu1\r
     netbase: 5.3\r
     netcat-openbsd: 1.105-7ubuntu1\r
-    openjdk-8-jre-headless:amd64: 8u131-b11-0ubuntu1.16.04.2\r
+    openjdk-8-jdk:amd64: 8u131-b11-2ubuntu1.16.04.3\r
+    openjdk-8-jdk-headless:amd64: 8u131-b11-2ubuntu1.16.04.3\r
+    openjdk-8-jre:amd64: 8u131-b11-2ubuntu1.16.04.3\r
+    openjdk-8-jre-headless:amd64: 8u131-b11-2ubuntu1.16.04.3\r
     openssh-client: 1:7.2p2-4ubuntu2.1\r
     openssh-server: 1:7.2p2-4ubuntu2.1\r
     openssh-sftp-server: 1:7.2p2-4ubuntu2.1\r
@@ -789,8 +844,8 @@ Below a subset of the running configuration:
     python3-six: 1.10.0-3\r
     python3-urllib3: 1.13.1-2ubuntu0.16.04.1\r
     python3-virtualenv: 15.0.1+ds-3\r
-    python3.5: 3.5.2-2~16.01\r
-    python3.5-minimal: 3.5.2-2~16.01\r
+    python3.5: 3.5.2-2ubuntu0~16.04.1\r
+    python3.5-minimal: 3.5.2-2ubuntu0~16.04.1\r
     qemu-block-extra:amd64: 1:2.5+dfsg-5ubuntu10.5\r
     qemu-system-common: 1:2.5+dfsg-5ubuntu10.5\r
     qemu-system-x86: 1:2.5+dfsg-5ubuntu10.5\r
@@ -820,8 +875,9 @@ Below a subset of the running configuration:
     tcl-expect:amd64: 5.45-7\r
     tcl8.6: 8.6.5+dfsg-2\r
     tcpd: 7.6.q-25\r
+    telnet: 0.17-40\r
     tk8.6: 8.6.5-1\r
-    tzdata: 2016g-0ubuntu0.16.04\r
+    tzdata: 2016f-0ubuntu0.16.04\r
     ubuntu-keyring: 2012.05.19\r
     ubuntu-minimal: 1.361\r
     ucf: 3.0036\r
@@ -834,24 +890,23 @@ Below a subset of the running configuration:
     vim-common: 2:7.4.1689-3ubuntu1.1\r
     vim-tiny: 2:7.4.1689-3ubuntu1.1\r
     virtualenv: 15.0.1+ds-3\r
-    vpp: 17.10-rc0~89-g7c35f19~b2621\r
-    vpp-dbg: 17.10-rc0~89-g7c35f19~b2621\r
-    vpp-dev: 17.10-rc0~89-g7c35f19~b2621\r
-    vpp-dpdk-dkms: 17.05-vpp6\r
-    vpp-lib: 17.10-rc0~89-g7c35f19~b2621\r
-    vpp-plugins: 17.10-rc0~89-g7c35f19~b2621\r
     wamerican: 7.1-1\r
     wget: 1.17.1-1ubuntu1.1\r
     whiptail: 0.52.18-1ubuntu2\r
     wireless-regdb: 2015.07.20-1ubuntu1\r
     x11-common: 1:7.7+13ubuntu3\r
     x11-utils: 7.7+3\r
+    x11proto-core-dev: 7.0.31-1~ubuntu16.04.1\r
+    x11proto-input-dev: 2.3.1-1\r
+    x11proto-kb-dev: 1.0.7-0ubuntu1\r
     xauth: 1:1.0.9-1ubuntu2\r
     xbitmaps: 1.1.1-2\r
     xdg-user-dirs: 0.15-2ubuntu6\r
     xkb-data: 2.16-1ubuntu1\r
     xml-core: 0.13+nmu2\r
+    xorg-sgml-doctools: 1:1.11-1\r
     xterm: 322-1ubuntu1\r
+    xtrans-dev: 1.3.5-1\r
     xz-utils: 5.1.1alpha+20120614-2ubuntu2\r
     zlib1g:amd64: 1:1.2.8.dfsg-2ubuntu4\r
     zlib1g-dev:amd64: 1:1.2.8.dfsg-2ubuntu4\r
@@ -1907,6 +1962,8 @@ Below a subset of the running configuration:
      [ + ]  cpufrequtils\r
      [ + ]  cron\r
      [ + ]  dbus\r
+     [ + ]  docker\r
+     [ + ]  ebtables\r
      [ + ]  grub-common\r
      [ - ]  hostname.sh\r
      [ - ]  hwclock.sh\r
@@ -1927,7 +1984,7 @@ Below a subset of the running configuration:
      [ - ]  plymouth-log\r
      [ + ]  procps\r
      [ + ]  qemu-kvm\r
-     [ + ]  rc.local\r
+     [ - ]  rc.local\r
      [ + ]  resolvconf\r
      [ - ]  rsync\r
      [ + ]  rsyslog\r
@@ -1939,7 +1996,7 @@ Below a subset of the running configuration:
      [ - ]  umountnfs.sh\r
      [ - ]  umountroot\r
      [ + ]  urandom\r
-     [ + ]  uuidd\r
+     [ - ]  uuidd\r
      [ - ]  x11-common\r
 \r
 **Host CFS optimizations (QEMU+VPP)**\r
@@ -2037,31 +2094,37 @@ Tagged by **1T1C**
 \r
     unix\r
     {\r
-        cli-listen localhost:5002\r
-        log /tmp/vpe.log\r
-        nodaemon\r
+      cli-listen localhost:5002\r
+      log /tmp/vpe.log\r
+      nodaemon\r
     }\r
     cpu\r
     {\r
-        corelist-workers 2\r
-        main-core 1\r
+      corelist-workers 2\r
+      main-core 1\r
+    }\r
+    ip4\r
+    {\r
+      heap-size "4G"\r
     }\r
     ip6\r
     {\r
-        heap-size 3G\r
-        hash-buckets 2000000\r
+      heap-size "4G"\r
+      hash-buckets "2000000"\r
     }\r
-    heapsize 3G\r
+    heapsize "4G"\r
     dpdk\r
     {\r
-        dev default\r
-        {\r
-            num-rx-queues 1\r
-        }\r
-        dev 0000:0a:00.0\r
-        dev 0000:0a:00.1\r
-        socket-mem 1024,1024\r
-        no-multi-seg\r
+      dev 0000:88:00.1\r
+      dev 0000:88:00.0\r
+      no-multi-seg\r
+      dev default\r
+      {\r
+        num-rx-desc 2048\r
+        num-rx-queues 1\r
+        num-tx-desc 2048\r
+      }\r
+      socket-mem "1024,1024\r
     }\r
 \r
 Tagged by **2T1C**\r
@@ -2070,31 +2133,37 @@ Tagged by **2T1C**
 \r
     unix\r
     {\r
-        cli-listen localhost:5002\r
-        log /tmp/vpe.log\r
-        nodaemon\r
+      cli-listen localhost:5002\r
+      log /tmp/vpe.log\r
+      nodaemon\r
     }\r
     cpu\r
     {\r
-        corelist-workers 2,3\r
-        main-core 1\r
+      corelist-workers 2,3\r
+      main-core 1\r
+    }\r
+    ip4\r
+    {\r
+      heap-size "4G"\r
     }\r
     ip6\r
     {\r
-        heap-size 3G\r
-        hash-buckets 2000000\r
+      heap-size "4G"\r
+      hash-buckets "2000000"\r
     }\r
-    heapsize 3G\r
+    heapsize "4G"\r
     dpdk\r
     {\r
-        dev default\r
-        {\r
-            num-rx-queues 1\r
-        }\r
-        dev 0000:0a:00.0\r
-        dev 0000:0a:00.1\r
-        socket-mem 1024,1024\r
-        no-multi-seg\r
+      dev 0000:88:00.1\r
+      dev 0000:88:00.0\r
+      no-multi-seg\r
+      dev default\r
+      {\r
+        num-rx-desc 2048\r
+        num-rx-queues 1\r
+        num-tx-desc 2048\r
+      }\r
+      socket-mem "1024,1024\r
     }\r
 \r
 Tagged by **4T4C**\r
@@ -2103,31 +2172,37 @@ Tagged by **4T4C**
 \r
     unix\r
     {\r
-        cli-listen localhost:5002\r
-        log /tmp/vpe.log\r
-        nodaemon\r
+      cli-listen localhost:5002\r
+      log /tmp/vpe.log\r
+      nodaemon\r
     }\r
     cpu\r
     {\r
-        corelist-workers 2,3,4,5\r
-        main-core 1\r
+      corelist-workers 2,3,4,5\r
+      main-core 1\r
+    }\r
+    ip4\r
+    {\r
+      heap-size "4G"\r
     }\r
     ip6\r
     {\r
-        heap-size 3G\r
-        hash-buckets 2000000\r
+      heap-size "4G"\r
+      hash-buckets "2000000"\r
     }\r
-    heapsize 3G\r
+    heapsize "4G"\r
     dpdk\r
     {\r
-        dev default\r
-        {\r
-            num-rx-queues 2\r
-        }\r
-        dev 0000:0a:00.0\r
-        dev 0000:0a:00.1\r
-        socket-mem 1024,1024\r
-        no-multi-seg\r
+      dev 0000:88:00.1\r
+      dev 0000:88:00.0\r
+      no-multi-seg\r
+      dev default\r
+      {\r
+        num-rx-desc 2048\r
+        num-rx-queues 2\r
+        num-tx-desc 2048\r
+      }\r
+      socket-mem "1024,1024\r
     }\r
 \r
 \r
@@ -2164,7 +2239,7 @@ DPDK v17.11
 \r
 ::\r
 \r
-    $ sh -c 'cd <t-rex-install-dir>/scripts/ && sudo nohup ./t-rex-64 -i -c 7 --iom 0 > /dev/null 2>&1 &'> /dev/null\r
+    $ sh -c 'cd <t-rex-install-dir>/scripts/ && sudo nohup ./t-rex-64 -i -c 7 --iom 0 > /tmp/trex.log 2>&1 &'> /dev/null\r
 \r
 **TG common API - pointer to driver**\r
 \r

diff --git a/docs/tag_documentation.rst b/docs/tag_documentation.rst
index 165feee..e54fdc8 100644 (file)
--- a/docs/tag_documentation.rst
+++ b/docs/tag_documentation.rst
@@ -503,6 +503,10 @@ Container orchestration tags
 
     2 VPP running in 2 Docker containers acting as VNF work load.
 
+.. topic:: 4VNF
+
+    4 VPP running in 4 Docker containers acting as VNF work load.
+
 Multi-threading tags
 --------------------
 

diff --git a/resources/tools/presentation/conf.py b/resources/tools/presentation/conf.py
index e833b64..8c266c2 100644 (file)
--- a/resources/tools/presentation/conf.py
+++ b/resources/tools/presentation/conf.py
@@ -1,7 +1,6 @@
 # -*- coding: utf-8 -*-
 #
-# CSIT 17.01 report documentation build configuration file, created by
-# sphinx-quickstart on Sun Jan 15 09:49:36 2017.
+# CSIT report documentation build configuration file
 #
 # This file is execfile()d with the current directory set to its
 # containing dir.
@@ -46,7 +45,7 @@ master_doc = 'index'
 
 # General information about the project.
 project = u'FD.io CSIT'
-copyright = u'2017, FD.io'
+copyright = u'2018, FD.io'
 author = u'FD.io CSIT'
 
 # The version info for the project you're documenting, acts as replacement for
@@ -59,38 +58,38 @@ author = u'FD.io CSIT'
 #release = u''
 
 rst_epilog = """
-.. |release-1| replace:: rls1704
-.. |vpp-release| replace:: VPP-17.10 release
-.. |vpp-release-1| replace:: VPP-17.04 release
-.. |dpdk-release| replace:: DPDK 17.05
-.. |trex-release| replace:: TRex v2.25
-.. |virl-image-ubuntu| replace:: ubuntu-16.04.1_2017-02-23_1.8
+.. |release-1| replace:: rls1710
+.. |vpp-release| replace:: VPP-{vpprelease} release
+.. |vpp-release-1| replace:: VPP-17.10 release
+.. |dpdk-release| replace:: DPDK 17.11
+.. |trex-release| replace:: TRex v2.35
+.. |virl-image-ubuntu| replace:: ubuntu-16.04.1_2017-10-21_2.0
 .. |virl-image-centos| replace:: centos-7.3-1611_2017-02-23_1.4
 
-.. _pdf version of this report: https://docs.fd.io/csit/rls1710/report/_static/archive/csit_rls1710.pdf
-.. _tag documentation rst file: https://git.fd.io/csit/tree/docs/tag_documentation.rst?h=rls1710
-.. _TRex intallation: https://git.fd.io/csit/tree/resources/tools/trex/trex_installer.sh?h=rls1710
-.. _TRex driver: https://git.fd.io/csit/tree/resources/tools/trex/trex_stateless_profile.py?h=rls1710
-.. _VIRL topologies directory: https://git.fd.io/csit/tree/resources/tools/virl/topologies/?h=rls1710
-.. _VIRL images lists: https://git.fd.io/csit/tree/resources/tools/disk-image-builder/ubuntu/lists/?h=rls1710
-.. _VIRL nested: https://git.fd.io/csit/tree/resources/tools/disk-image-builder/nested/?h=rls1710
-.. _CSIT Honeycomb Functional Tests Documentation: https://docs.fd.io/csit/rls1710/doc/tests.vpp.func.honeycomb.html
-.. _CSIT Honeycomb Performance Tests Documentation: https://docs.fd.io/csit/rls1710/doc/tests.vpp.perf.honeycomb.html
-.. _CSIT DPDK Performance Tests Documentation: https://docs.fd.io/csit/rls1710/doc/tests.dpdk.perf.html
-.. _CSIT VPP Functional Tests Documentation: https://docs.fd.io/csit/rls1710/doc/tests.vpp.func.html
-.. _CSIT VPP Performance Tests Documentation: https://docs.fd.io/csit/rls1710/doc/tests.vpp.perf.html
-.. _CSIT NSH_SFC Functional Tests Documentation: https://docs.fd.io/csit/rls1710/doc/tests.nsh_sfc.func.html
-.. _VPP test framework documentation: https://docs.fd.io/vpp/17.10/vpp_make_test/html/
-.. _FD.io test executor vpp performance jobs: https://jenkins.fd.io/view/csit/job/csit-vpp-perf-1710-all
-.. _FD.io test executor ligato performance jobs: https://jenkins.fd.io/job/csit-ligato-perf-1710-all
-.. _FD.io test executor vpp functional jobs: https://jenkins.fd.io/view/csit/job/csit-vpp-functional-1710-ubuntu1604-virl/lastSuccessfulBuild
-.. _FD.io test executor dpdk performance jobs: https://jenkins.fd.io/view/csit/job/csit-dpdk-perf-1710-all
-.. _FD.io test executor Honeycomb functional jobs: https://jenkins.fd.io/view/csit/job/hc2vpp-csit-integration-1710-ubuntu1604/lastSuccessfulBuild
+.. _pdf version of this report: https://docs.fd.io/csit/{release}/report/_static/archive/csit_{release}.pdf
+.. _tag documentation rst file: https://git.fd.io/csit/tree/docs/tag_documentation.rst?h={release}
+.. _TRex intallation: https://git.fd.io/csit/tree/resources/tools/trex/trex_installer.sh?h={release}
+.. _TRex driver: https://git.fd.io/csit/tree/resources/tools/trex/trex_stateless_profile.py?h={release}
+.. _VIRL topologies directory: https://git.fd.io/csit/tree/resources/tools/virl/topologies/?h={release}
+.. _VIRL images lists: https://git.fd.io/csit/tree/resources/tools/disk-image-builder/ubuntu/lists/?h={release}
+.. _VIRL nested: https://git.fd.io/csit/tree/resources/tools/disk-image-builder/nested/?h={release}
+.. _CSIT Honeycomb Functional Tests Documentation: https://docs.fd.io/csit/{release}/doc/tests.vpp.func.honeycomb.html
+.. _CSIT Honeycomb Performance Tests Documentation: https://docs.fd.io/csit/{release}/doc/tests.vpp.perf.honeycomb.html
+.. _CSIT DPDK Performance Tests Documentation: https://docs.fd.io/csit/{release}/doc/tests.dpdk.perf.html
+.. _CSIT VPP Functional Tests Documentation: https://docs.fd.io/csit/{release}/doc/tests.vpp.func.html
+.. _CSIT VPP Performance Tests Documentation: https://docs.fd.io/csit/{release}/doc/tests.vpp.perf.html
+.. _CSIT NSH_SFC Functional Tests Documentation: https://docs.fd.io/csit/{release}/doc/tests.nsh_sfc.func.html
+.. _VPP test framework documentation: https://docs.fd.io/vpp/{vpprelease}/vpp_make_test/html/
+.. _FD.io test executor vpp performance jobs: https://jenkins.fd.io/view/csit/job/csit-vpp-perf-{srelease}-all
+.. _FD.io test executor ligato performance jobs: https://jenkins.fd.io/job/csit-ligato-perf-{srelease}-all
+.. _FD.io test executor vpp functional jobs: https://jenkins.fd.io/view/csit/job/csit-vpp-functional-{srelease}-ubuntu1604-virl/lastSuccessfulBuild
+.. _FD.io test executor dpdk performance jobs: https://jenkins.fd.io/view/csit/job/csit-dpdk-perf-{srelease}-all
+.. _FD.io test executor Honeycomb functional jobs: https://jenkins.fd.io/view/csit/job/hc2vpp-csit-integration-{srelease}-ubuntu1604/lastSuccessfulBuild
 .. _FD.io test executor honeycomb performance jobs: https://jenkins.fd.io/view/hc2vpp/job/hc2vpp-csit-perf-master-ubuntu1604/lastSuccessfulBuild
-.. _FD.io test executor NSH_SFC functional jobs: https://jenkins.fd.io/view/csit/job/csit-nsh_sfc-verify-func-1710-ubuntu1604-virl/lastSuccessfulBuild
-.. _FD.io VPP compile job: https://jenkins.fd.io/view/vpp/job/vpp-merge-1710-ubuntu1604/
-.. _CSIT Testbed Setup: https://git.fd.io/csit/tree/resources/tools/testbed-setup/README.md?h=rls1710
-"""
+.. _FD.io test executor NSH_SFC functional jobs: https://jenkins.fd.io/view/csit/job/csit-nsh_sfc-verify-func-{srelease}-ubuntu1604-virl/lastSuccessfulBuild
+.. _FD.io VPP compile job: https://jenkins.fd.io/view/vpp/job/vpp-merge-{srelease}-ubuntu1604/
+.. _CSIT Testbed Setup: https://git.fd.io/csit/tree/resources/tools/testbed-setup/README.md?h={release}
+""".format(release='rls1801', srelease='1801', vpprelease='18.01')
 
 # The language for content autogenerated by Sphinx. Refer to documentation
 # for a list of supported languages.