CSIT-53: HC Keywords: Policy - security groups 41/1941/4
authorTibor Frank <tifrank@cisco.com>
Tue, 12 Jul 2016 12:46:22 +0000 (14:46 +0200)
committerMatej Klotton <mklotton@cisco.com>
Wed, 20 Jul 2016 15:02:24 +0000 (15:02 +0000)
- add keywords to manipulate ACL data using Honeycomb REST API

Change-Id: Ia08faba216c5476113c0b3249de9c434eaa26a17
Signed-off-by: Tibor Frank <tifrank@cisco.com>
resources/libraries/python/honeycomb/HcAPIKwACL.py [new file with mode: 0644]
resources/libraries/python/honeycomb/HcAPIKwInterfaces.py
resources/libraries/python/honeycomb/HoneycombUtil.py
resources/templates/honeycomb/config_classify_table.url [new file with mode: 0644]
resources/templates/honeycomb/oper_classify_table.url [new file with mode: 0644]

diff --git a/resources/libraries/python/honeycomb/HcAPIKwACL.py b/resources/libraries/python/honeycomb/HcAPIKwACL.py
new file mode 100644 (file)
index 0000000..c11e325
--- /dev/null
@@ -0,0 +1,264 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""This module implements keywords to manipulate ACL data structures using
+Honeycomb REST API."""
+
+from resources.libraries.python.HTTPRequest import HTTPCodes
+from resources.libraries.python.honeycomb.HoneycombSetup import HoneycombError
+from resources.libraries.python.honeycomb.HoneycombUtil \
+    import HoneycombUtil as HcUtil
+from resources.libraries.python.honeycomb.HoneycombUtil \
+    import DataRepresentation
+
+
+class ACLKeywords(object):
+    """Implementation of keywords which make it possible to:
+    - add classify table(s),
+    - remove classify table(s),
+    - get operational data about classify table(s),
+    - add classify session(s),
+    - remove classify session(s),
+    - get operational data about classify sessions(s).
+    """
+
+    def __init__(self):
+        pass
+
+    @staticmethod
+    def _set_classify_table_properties(node, path, data=None):
+        """Set classify table properties and check the return code.
+
+        :param node: Honeycomb node.
+        :param path: Path which is added to the base path to identify the data.
+        :param data: The new data to be set. If None, the item will be removed.
+        :type node: dict
+        :type path: str
+        :type data: dict
+        :return: Content of response.
+        :rtype: bytearray
+        :raises HoneycombError: If the status code in response to PUT is not
+        200 = OK.
+        """
+
+        if data:
+            status_code, resp = HcUtil.\
+                put_honeycomb_data(node, "config_classify_table", data, path,
+                                   data_representation=DataRepresentation.JSON)
+        else:
+            status_code, resp = HcUtil.\
+                delete_honeycomb_data(node, "config_classify_table", path)
+
+        if status_code != HTTPCodes.OK:
+            raise HoneycombError(
+                "The configuration of classify table was not successful. "
+                "Status code: {0}.".format(status_code))
+        return resp
+
+    @staticmethod
+    def add_classify_table(node, table):
+        """Add a classify table to the list of classify tables. The keyword does
+        not validate given data.
+
+        :param node: Honeycomb node.
+        :param table: Classify table to be added.
+        :type node: dict
+        :type table: dict
+        :return: Content of response.
+        :rtype: bytearray
+        """
+
+        path = "/classify-table/" + table["name"]
+        data = {"classify-table": [table, ]}
+        return ACLKeywords._set_classify_table_properties(node, path, data)
+
+    @staticmethod
+    def remove_all_classify_tables(node):
+        """Remove all classify tables defined on the node.
+
+        :param node: Honeycomb node.
+        :type node: dict
+        :return: Content of response.
+        :rtype: bytearray
+        """
+
+        return ACLKeywords._set_classify_table_properties(node, path="")
+
+    @staticmethod
+    def remove_classify_table(node, table_name):
+        """Remove the given classify table.
+
+        :param node: Honeycomb node.
+        :param table_name: Name of the classify table to be removed.
+        :type node: dict
+        :type table_name: str
+        :return: Content of response.
+        :rtype: bytearray
+        """
+
+        path = "/classify-table/" + table_name
+        return ACLKeywords._set_classify_table_properties(node, path)
+
+    @staticmethod
+    def get_all_classify_tables_oper_data(node):
+        """Get operational data about all classify tables present on the node.
+
+        :param node: Honeycomb node.
+        :type node: dict
+        :return: List of classify tables.
+        :rtype: list
+        """
+
+        status_code, resp = HcUtil.\
+            get_honeycomb_data(node, "oper_classify_table")
+
+        if status_code != HTTPCodes.OK:
+            raise HoneycombError(
+                "Not possible to get operational information about the "
+                "classify tables. Status code: {0}.".format(status_code))
+        try:
+            return resp["vpp-classifier"]["classify-table"]
+        except (KeyError, TypeError):
+            return []
+
+    @staticmethod
+    def get_classify_table_oper_data(node, table_name):
+        """Get operational data about the given classify table.
+
+        :param node: Honeycomb node.
+        :param table_name: Name of the classify table.
+        :type node: dict
+        :type table_name: str
+        :return: Operational data about the given classify table.
+        :rtype: dict
+        """
+
+        path = "/classify-table/" + table_name
+        status_code, resp = HcUtil.\
+            get_honeycomb_data(node, "oper_classify_table", path)
+
+        if status_code != HTTPCodes.OK:
+            raise HoneycombError(
+                "Not possible to get operational information about the "
+                "classify tables. Status code: {0}.".format(status_code))
+        try:
+            return resp["classify-table"][0]
+        except (KeyError, TypeError):
+            return []
+
+    @staticmethod
+    def get_all_classify_tables_cfg_data(node):
+        """Get configuration data about all classify tables present on the node.
+
+        :param node: Honeycomb node.
+        :type node: dict
+        :return: List of classify tables.
+        :rtype: list
+        """
+
+        status_code, resp = HcUtil.\
+            get_honeycomb_data(node, "config_classify_table")
+
+        if status_code != HTTPCodes.OK:
+            raise HoneycombError(
+                "Not possible to get operational information about the "
+                "classify tables. Status code: {0}.".format(status_code))
+        try:
+            return resp["vpp-classifier"]["classify-table"]
+        except (KeyError, TypeError):
+            return []
+
+    @staticmethod
+    def add_classify_session(node, table_name, session):
+        """Add a classify session to the classify table.
+
+        :param node: Honeycomb node.
+        :param table_name: Name of the classify table.
+        :param session: Classify session to be added to the classify table.
+        :type node: dict
+        :type table_name: str
+        :type session: dict
+        :return: Content of response.
+        :rtype: bytearray
+        """
+
+        path = "/classify-table/" + table_name + \
+               "/classify-session/" + session["match"]
+        data = {"classify-session": [session, ]}
+        return ACLKeywords._set_classify_table_properties(node, path, data)
+
+    @staticmethod
+    def remove_classify_session(node, table_name, session_match):
+        """Remove the given classify session from the classify table.
+
+        :param node: Honeycomb node.
+        :param table_name: Name of the classify table.
+        :param session_match: Classify session match.
+        :type node: dict
+        :type table_name: str
+        :type session_match: str
+        :return: Content of response.
+        :rtype: bytearray
+        """
+
+        path = "/classify-table/" + table_name + \
+               "/classify-session/" + session_match
+        return ACLKeywords._set_classify_table_properties(node, path)
+
+    @staticmethod
+    def get_all_classify_sessions_oper_data(node, table_name):
+        """Get operational data about all classify sessions in the classify
+        table.
+
+        :param node: Honeycomb node.
+        :param table_name: Name of the classify table.
+        :type node: dict
+        :type table_name: str
+        :return: List of classify sessions present in the classify table.
+        :rtype: list
+        """
+
+        table_data = ACLKeywords.get_classify_table_oper_data(node, table_name)
+        try:
+            return table_data["classify-table"][0]["classify-session"]
+        except (KeyError, TypeError):
+            return []
+
+    @staticmethod
+    def get_classify_session_oper_data(node, table_name, session_match):
+        """Get operational data about the given classify session in the classify
+        table.
+
+        :param node: Honeycomb node.
+        :param table_name: Name of the classify table.
+        :param session_match: Classify session match.
+        :type node: dict
+        :type table_name: str
+        :type session_match: str
+        :return: Classify session operational data.
+        :rtype: dict
+        """
+
+        path = "/classify-table/" + table_name + \
+               "/classify-session/" + session_match
+        status_code, resp = HcUtil.\
+            get_honeycomb_data(node, "oper_classify_table", path)
+
+        if status_code != HTTPCodes.OK:
+            raise HoneycombError(
+                "Not possible to get operational information about the "
+                "classify tables. Status code: {0}.".format(status_code))
+        try:
+            return resp["classify-session"][0]
+        except (KeyError, TypeError):
+            return {}
index 4feb22e..ff1589f 100644 (file)
@@ -1200,7 +1200,7 @@ class InterfaceKeywords(object):
             node, super_interface, path, address)
 
     @staticmethod
             node, super_interface, path, address)
 
     @staticmethod
-    def remove_all_ipv4_addresses_from_sub_interface(node, super_interface,
+    def remove_all_ipv4_addresses_from_sub_interface(node, super_interface, # pylint: disable=invalid-name
                                                      identifier):
         """Remove all ipv4 addresses from the specified sub-interface.
 
                                                      identifier):
         """Remove all ipv4 addresses from the specified sub-interface.
 
@@ -1305,3 +1305,69 @@ class InterfaceKeywords(object):
         vxlan_gpe_structure = [new_vxlan_gpe, ]
         return InterfaceKeywords._set_interface_properties(
             node, interface, path, vxlan_gpe_structure)
         vxlan_gpe_structure = [new_vxlan_gpe, ]
         return InterfaceKeywords._set_interface_properties(
             node, interface, path, vxlan_gpe_structure)
+
+    @staticmethod
+    def enable_acl_on_interface(node, interface, table_name):
+        """Enable ACL on the given interface.
+
+        :param node: Honeycomb node.
+        :param interface: The interface where the ACL will be enabled.
+        :param table_name: Name of the classify table.
+        :type node: dict
+        :type interface: str
+        :type table_name: str
+        :return: Content of response.
+        :rtype: bytearray
+        :raises HoneycombError: If the configuration of interface is not
+        successful.
+        """
+
+        interface = interface.replace("/", "%2F")
+
+        data = {
+            "v3po:acl": {
+                "l2-acl": {
+                    "classify-table": table_name
+                },
+                "ip4-acl": {
+                    "classify-table": table_name
+                }
+            }
+        }
+
+        path = "/interface/" + interface + "/v3po:acl"
+        status_code, resp = HcUtil.\
+            put_honeycomb_data(node, "config_vpp_interfaces", data, path,
+                               data_representation=DataRepresentation.JSON)
+        if status_code != HTTPCodes.OK:
+            raise HoneycombError(
+                "The configuration of interface '{0}' was not successful. "
+                "Status code: {1}.".format(interface, status_code))
+        return resp
+
+    @staticmethod
+    def disable_acl_on_interface(node, interface):
+        """Disable ACL on the given interface.
+
+        :param node: Honeycomb node.
+        :param interface: The interface where the ACL will be disabled.
+        :type node: dict
+        :type interface: str
+        :return: Content of response.
+        :rtype: bytearray
+        :raises HoneycombError: If the configuration of interface is not
+        successful.
+        """
+
+        interface = interface.replace("/", "%2F")
+
+        path = "/interface/" + interface + "/v3po:acl"
+
+        status_code, resp = HcUtil.\
+            delete_honeycomb_data(node, "config_vpp_interfaces", path)
+
+        if status_code != HTTPCodes.OK:
+            raise HoneycombError(
+                "The configuration of interface '{0}' was not successful. "
+                "Status code: {1}.".format(interface, status_code))
+        return resp
index 2f8392e..8f1392c 100644 (file)
@@ -285,24 +285,27 @@ class HoneycombUtil(object):
         return origin_data
 
     @staticmethod
         return origin_data
 
     @staticmethod
-    def get_honeycomb_data(node, url_file):
+    def get_honeycomb_data(node, url_file, path=""):
         """Retrieve data from Honeycomb according to given URL.
 
         :param node: Honeycomb node.
         :param url_file: URL file. The argument contains only the name of file
         without extension, not the full path.
         """Retrieve data from Honeycomb according to given URL.
 
         :param node: Honeycomb node.
         :param url_file: URL file. The argument contains only the name of file
         without extension, not the full path.
+        :param path: Path which is added to the base path to identify the data.
         :type node: dict
         :type url_file: str
         :type node: dict
         :type url_file: str
+        :type path: str
         :return: Status code and content of response.
         :rtype tuple
         """
 
         :return: Status code and content of response.
         :rtype tuple
         """
 
-        path = HoneycombUtil.read_path_from_url_file(url_file)
+        base_path = HoneycombUtil.read_path_from_url_file(url_file)
+        path = base_path + path
         status_code, resp = HTTPRequest.get(node, path)
         return status_code, loads(resp)
 
     @staticmethod
         status_code, resp = HTTPRequest.get(node, path)
         return status_code, loads(resp)
 
     @staticmethod
-    def put_honeycomb_data(node, url_file, data,
+    def put_honeycomb_data(node, url_file, data, path="",
                            data_representation=DataRepresentation.JSON):
         """Send configuration data using PUT request and return the status code
         and response content.
                            data_representation=DataRepresentation.JSON):
         """Send configuration data using PUT request and return the status code
         and response content.
@@ -311,10 +314,12 @@ class HoneycombUtil(object):
         :param url_file: URL file. The argument contains only the name of file
         without extension, not the full path.
         :param data: Configuration data to be sent to Honeycomb.
         :param url_file: URL file. The argument contains only the name of file
         without extension, not the full path.
         :param data: Configuration data to be sent to Honeycomb.
+        :param path: Path which is added to the base path to identify the data.
         :param data_representation: How the data is represented.
         :type node: dict
         :type url_file: str
         :type data: dict, str
         :param data_representation: How the data is represented.
         :type node: dict
         :type url_file: str
         :type data: dict, str
+        :type path: str
         :type data_representation: DataRepresentation
         :return: Status code and content of response.
         :rtype: tuple
         :type data_representation: DataRepresentation
         :return: Status code and content of response.
         :rtype: tuple
@@ -332,7 +337,8 @@ class HoneycombUtil(object):
 
         logger.trace(data)
 
 
         logger.trace(data)
 
-        path = HoneycombUtil.read_path_from_url_file(url_file)
+        base_path = HoneycombUtil.read_path_from_url_file(url_file)
+        path = base_path + path
         return HTTPRequest.put(node=node, path=path, headers=header,
                                payload=data)
 
         return HTTPRequest.put(node=node, path=path, headers=header,
                                payload=data)
 
@@ -373,17 +379,20 @@ class HoneycombUtil(object):
                                 payload=data, timeout=timeout)
 
     @staticmethod
                                 payload=data, timeout=timeout)
 
     @staticmethod
-    def delete_honeycomb_data(node, url_file):
+    def delete_honeycomb_data(node, url_file, path=""):
         """Delete data from Honeycomb according to given URL.
 
         :param node: Honeycomb node.
         :param url_file: URL file. The argument contains only the name of file
         without extension, not the full path.
         """Delete data from Honeycomb according to given URL.
 
         :param node: Honeycomb node.
         :param url_file: URL file. The argument contains only the name of file
         without extension, not the full path.
+        :param path: Path which is added to the base path to identify the data.
         :type node: dict
         :type url_file: str
         :type node: dict
         :type url_file: str
+        :type path: str
         :return: Status code and content of response.
         :rtype tuple
         """
 
         :return: Status code and content of response.
         :rtype tuple
         """
 
-        path = HoneycombUtil.read_path_from_url_file(url_file)
+        base_path = HoneycombUtil.read_path_from_url_file(url_file)
+        path = base_path + path
         return HTTPRequest.delete(node, path)
         return HTTPRequest.delete(node, path)
diff --git a/resources/templates/honeycomb/config_classify_table.url b/resources/templates/honeycomb/config_classify_table.url
new file mode 100644 (file)
index 0000000..986b117
--- /dev/null
@@ -0,0 +1 @@
+/restconf/config/vpp-classifier:vpp-classifier
\ No newline at end of file
diff --git a/resources/templates/honeycomb/oper_classify_table.url b/resources/templates/honeycomb/oper_classify_table.url
new file mode 100644 (file)
index 0000000..f9fd294
--- /dev/null
@@ -0,0 +1 @@
+/restconf/operational/vpp-classifier:vpp-classifier-state
\ No newline at end of file