Reconf: Fix bidir/unidir mismatch

Results if NDR search is in TPS (so unidir) since
https://gerrit.fd.io/r/c/csit/+/28208

The bug was causing all reconf tests report zero loss,
as they used half of NDR load during reconfiguration.

+ Small improvements to descriptions of other traffic keywords.

Change-Id: Ib9af5861cc09e698eb762feb3f0a019571d17962
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

diff --git a/resources/libraries/robot/performance/performance_utils.robot b/resources/libraries/robot/performance/performance_utils.robot
index d45adc6..9a1de5c 100644 (file)
--- a/resources/libraries/robot/performance/performance_utils.robot
+++ b/resources/libraries/robot/performance/performance_utils.robot
@@ -87,8 +87,8 @@
 | | ... | using PLRsearch algorithm.
 | | ... | Display results as formatted test message.
 | | ... | Fail if computed lower bound is 110% of the minimal rate or less.
-| | ... | Input rates are understood as uni-directional,
-| | ... | reported result contains aggregate rates.
+| | ... | Input rates are unidirectional, in transaction per second.
+| | ... | Reported result may contain aggregate pps rates, depending on test.
 | | ... | Currently, the min_rate value is hardcoded to match test teardowns.
 | | ... | Call \${resetter} (if defined) to reset DUT state before each trial.
 | |
@@ -143,8 +143,8 @@
 | | ... | using an optimized search algorithm.
 | | ... | Display findings as a formatted test message.
 | | ... | Fail if a resulting lower bound has too high loss fraction.
-| | ... | Input rates are understood as uni-directional,
-| | ... | reported result contains aggregate rates.
+| | ... | Input rates are unidirectional, in transaction per second.
+| | ... | Reported result may contain aggregate pps rates, depending on test.
 | | ... | Additional latency measurements are performed for smaller loads,
 | | ... | even if latency stream is disabled in search. Their results
 | | ... | are also displayed.
@@ -159,7 +159,7 @@
 | | ... | Type: string
 | | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: integer or
 | | ... | string
-| | ... | - max_rate - Calculated maximal transmit rate [tps].
+| | ... | - max_rate - Calculated maximal unidirectional transmit rate [tps].
 | | ... | Type: float
 | | ... | - resetter - Callable to reset DUT state before each trial.
 | | ... | - transaction_scale - Number of ASTF transaction (zero if unlimited).
@@ -236,8 +236,8 @@
 | Find Throughput Using MLRsearch
 | | [Documentation]
 | | ... | Find and return lower bound NDR (zero PLR)
-| | ... | aggregate throughput using MLRsearch algorithm.
-| | ... | Input rates are understood as uni-directional.
+| | ... | throughput using MLRsearch algorithm.
+| | ... | Input and output rates are understood as uni-directional, in tps.
 | | ... | Currently, the min_rate value is hardcoded to match test teardowns.
 | | ... | Call \${resetter} (if defined) to reset DUT state before each trial.
 | |
@@ -246,7 +246,7 @@
 | | ... | Type: string
 | | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: integer or
 | | ... | string
-| | ... | - max_rate - Calculated maximal transmit rate [tps].
+| | ... | - max_rate - Calculated maximal unidirectional transmit rate [tps].
 | | ... | Type: float
 | | ... | - resetter - Callable to reset DUT state before each trial.
 | | ... | - transaction_scale - Number of ASTF transaction (zero if unlimited).
@@ -254,7 +254,8 @@
 | | ... | transactions. Default is "packet".
 | |
 | | ... | *Returns:*
-| | ... | - Lower bound for bi-directional throughput at given PLR. Type: float
+| | ... | - Lower bound for uni-directional tps throughput at given PLR.
+| | ... | Type: float
 | |
 | | ... | *Example:*
 | |
@@ -296,13 +297,13 @@
 | | [Documentation]
 | | ... | Send traffic at specified rate, single trial.
 | | ... | Extract latency information and append it to text message.
-| | ... | The rate argument is int, so should not include "pps".
+| | ... | The rate argument is float, so should not include "pps".
 | | ... | If the given rate is too low, a safe value is used instead.
 | | ... | Call \${resetter} (if defined) to reset DUT state before each trial.
 | |
 | | ... | *Arguments:*
 | | ... | - message_prefix - Preface to test message addition. Type: string
-| | ... | - rate - Rate [tps] for sending packets.
+| | ... | - rate - Unidirectional rate [tps] for sending packets.
 | | ... | Type: float
 | |
 | | ... | *Example:*
@@ -352,7 +353,7 @@
 | | ... | string
 | | ... | - ramp_up_duration - Suitable traffic duration [s].
 | | ... | Type: float
-| | ... | - ramp_up_rate - Suitable transmit rate [tps].
+| | ... | - ramp_up_rate - Suitable unidirectional transmit rate [tps].
 | | ... | Type: float
 | | ... | - transaction_type - String identifier to determine how to count
 | | ... | transactions. Default is "packet".
@@ -394,7 +395,7 @@
 | |
 | | ... | *Arguments:*
 | | ... | - trial_duration - Duration of single trial [s]. Type: float
-| | ... | - rate - Target transmit rate [tps]. Type: float
+| | ... | - rate - Target unidirectional transmit rate [tps]. Type: float
 | | ... | Type: string
 | | ... | - trial_multiplicity - How many trials in this measurement.
 | | ... | Type: boolean
@@ -614,7 +615,7 @@
 | | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: integer or
 | | ... | string
 | | ... | *Arguments:*
-| | ... | - rate - Rate [tps] for sending packets.
+| | ... | - rate - Unidirectional rate [tps] for sending packets.
 | | ... | Type: float
 | |
 | | ... | *Example:*

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
index 71f05cc..2bc7109 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -109,8 +109,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
index 35c3e5a..cb7b0a8 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -109,8 +109,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
index 6bd4e5f..c320ccf 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -110,8 +110,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
index 0793780..255987a 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -110,8 +110,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
index 00e0bd7..fa2759b 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -109,8 +109,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
index d2616a9..3c2cfa7 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -109,8 +109,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
index 729c4ae..349b658 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -110,8 +110,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
index bc2dada..07297ac 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -110,8 +110,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
index e802692..8ab6dcb 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -109,8 +109,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
index d5e3a0f..6b9ae46 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -109,8 +109,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
index 1a24c6a..e32456c 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -110,8 +110,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
index d0c235e..d21b2c5 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -110,8 +110,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
index c712e49..51fc3ee 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -109,8 +109,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
index 9f6eda4..159f136 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -109,8 +109,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
index 6fee5fb..5a9f776 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -110,8 +110,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
index ba0b6bc..8d94e9c 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -110,8 +110,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
index 18ea04a..4b91d69 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -109,8 +109,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
index 83b8746..25944d3 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -109,8 +109,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
index 5d21180..cadb95b 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -110,8 +110,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
index e4cfe4d..2f62543 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -110,8 +110,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
index 2e23474..89c9ab0 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -109,8 +109,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
index bbdb57f..62830af 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -109,8 +109,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
index aa27e1c..38789a2 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -110,8 +110,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
index 08da271..27bf368 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -110,8 +110,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
index b387a4e..46bc84c 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -109,8 +109,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
index 1d89410..ae32708 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -109,8 +109,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
index 97a7842..f8809f9 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -110,8 +110,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
index 368c758..4567c86 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -110,8 +110,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
index 2c16245..73be86c 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -109,8 +109,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
index 122e24e..784ae84 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -109,8 +109,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
index f2c4319..70842d4 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -110,8 +110,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
index 39752a9..6c647c8 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -110,8 +110,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
index ab49221..1610c41 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -109,8 +109,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
index 6d76d08..2853c7f 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -109,8 +109,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
index d009ad6..24ef76b 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -110,8 +110,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
index a5a15da..748b2c1 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -110,8 +110,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
index fbfb631..3c91b4b 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -109,8 +109,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
index f3569b8..8ed3fd6 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -109,8 +109,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
index 08fba2f..982cb06 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -110,8 +110,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
index 6afea0d..f1e1c3b 100644 (file)
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -110,8 +110,7 @@
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And VPP IPsec Create Tunnel Interfaces
 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot
index eb3abb3..a0a8f3c 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -105,8 +105,7 @@
 | | And Configure chains of NFs connected via vhost-user
 | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
 | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And Initialize layer dot1q
 | | ... | count=${nf_total_chains} | vlan_per_chain=${False}

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot
index 01886d9..18ef575 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -105,8 +105,7 @@
 | | And Configure chains of NFs connected via vhost-user
 | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
 | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And Initialize layer dot1q
 | | ... | count=${nf_total_chains} | vlan_per_chain=${False}

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot
index adf9dbc..a73d74a 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -105,8 +105,7 @@
 | | And Configure chains of NFs connected via vhost-user
 | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
 | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And Initialize layer dot1q
 | | ... | count=${nf_total_chains} | vlan_per_chain=${False}

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot
index 7319d68..daaf060 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -105,8 +105,7 @@
 | | And Configure chains of NFs connected via vhost-user
 | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
 | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And Initialize layer dot1q
 | | ... | count=${nf_total_chains} | vlan_per_chain=${False}

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot
index 697e5fe..55b6d99 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -105,8 +105,7 @@
 | | And Configure chains of NFs connected via vhost-user
 | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
 | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And Initialize layer dot1q
 | | ... | count=${nf_total_chains} | vlan_per_chain=${False}

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot
index fe93ae2..fb9882e 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -105,8 +105,7 @@
 | | And Configure chains of NFs connected via vhost-user
 | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
 | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And Initialize layer dot1q
 | | ... | count=${nf_total_chains} | vlan_per_chain=${False}

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot
index fb4ec99..9aaba04 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -105,8 +105,7 @@
 | | And Configure chains of NFs connected via vhost-user
 | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
 | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And Initialize layer dot1q
 | | ... | count=${nf_total_chains} | vlan_per_chain=${False}

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot
index cbcccfc..67f7b00 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -105,8 +105,7 @@
 | | And Configure chains of NFs connected via vhost-user
 | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
 | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And Initialize layer dot1q
 | | ... | count=${nf_total_chains} | vlan_per_chain=${False}

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot
index 8d21fee..58a2908 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -105,8 +105,7 @@
 | | And Configure chains of NFs connected via vhost-user
 | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
 | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And Initialize layer dot1q
 | | ... | count=${nf_total_chains} | vlan_per_chain=${False}

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot
index f907f80..5d9ea7c 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -105,8 +105,7 @@
 | | And Configure chains of NFs connected via vhost-user
 | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
 | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And Initialize layer dot1q
 | | ... | count=${nf_total_chains} | vlan_per_chain=${False}

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot
index 8f82411..c5c0816 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -105,8 +105,7 @@
 | | And Configure chains of NFs connected via vhost-user
 | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
 | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And Initialize layer dot1q
 | | ... | count=${nf_total_chains} | vlan_per_chain=${False}

diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot
index d34c71d..fd26e1f 100644 (file)
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -105,8 +105,7 @@
 | | And Configure chains of NFs connected via vhost-user
 | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
 | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io
-| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
-| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
+| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
 | | Start Traffic on Background | ${unidirectional_throughput}
 | | And Initialize layer dot1q
 | | ... | count=${nf_total_chains} | vlan_per_chain=${False}