Align NF_denisty tests

+ Apply layer approach for interfaces

Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I6c1898b9833f9f42b8912f1b521e30093360d7ea

diff --git a/resources/libraries/robot/l2/l2_bridge_domain.robot b/resources/libraries/robot/l2/l2_bridge_domain.robot
index a40f9c9..e15f8b4 100644 (file)
--- a/resources/libraries/robot/l2/l2_bridge_domain.robot
+++ b/resources/libraries/robot/l2/l2_bridge_domain.robot
@@ -591,22 +591,28 @@
 | | ${rxq}= | Run Keyword If | ${auto_scale} == ${True}
 | | ... | Set Variable | ${rxq_count_int}
 | | ... | ELSE | Set Variable | ${1}
-| | ${bd_id2}= | Evaluate | ${nf_nodes}+1
-| | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if1} | ${1}
-| | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if2}
+| | ${bd_id1}= | Evaluate | ${nf_nodes} * (${nf_chain} - 1) + ${nf_chain}
+| | ${bd_id2}= | Evaluate | ${nf_nodes} * ${nf_chain} + ${nf_chain}
+| | ${dut_str}= | Convert To Lowercase | ${dut}
+| | Add interface to bridge domain
+| | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${nf_chain}_1}
+| | ... | ${bd_id1}
+| | Add interface to bridge domain
+| | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${nf_chain}_2}
 | | ... | ${bd_id2}
 | | :FOR | ${nf_node} | IN RANGE | 1 | ${nf_nodes}+1
 | | | ${nf_id}= | Evaluate | (${nf_chain} - ${1}) * ${nf_nodes} + ${nf_node}
 | | | ${sock1}= | Set Variable | memif-${dut}_CNF
 | | | ${sock2}= | Set Variable | memif-${dut}_CNF
+| | | ${bd_id1}= | Evaluate | ${nf_id} + (${nf_chain} - 1)
+| | | ${bd_id2}= | Evaluate | ${bd_id1} + 1
 | | | Set up memif interfaces on DUT node | ${nodes['${dut}']}
 | | | ... | ${sock1} | ${sock2} | ${nf_id} | ${dut}-memif-${nf_id}-if1
 | | | ... | ${dut}-memif-${nf_id}-if2 | ${rxq} | ${rxq}
-| | | ${bd_id2}= | Evaluate | ${nf_node}+1
-| | | Add interface to bridge domain | ${nodes['${dut}']}
-| | | ... | ${${dut}-memif-${nf_id}-if1} | ${nf_node}
-| | | Add interface to bridge domain | ${nodes['${dut}']}
-| | | ... | ${${dut}-memif-${nf_id}-if2} | ${bd_id2}
+| | | Add interface to bridge domain
+| | | ... | ${nodes['${dut}']} | ${${dut}-memif-${nf_id}-if1} | ${bd_id1}
+| | | Add interface to bridge domain
+| | | ... | ${nodes['${dut}']} | ${${dut}-memif-${nf_id}-if2} | ${bd_id2}
 
 | Initialize L2 Bridge Domain with memif pairs
 | | [Documentation]
@@ -680,9 +686,16 @@
 | | ${rxq}= | Run Keyword If | ${auto_scale} == ${True}
 | | ... | Set Variable | ${rxq_count_int}
 | | ... | ELSE | Set Variable | ${1}
+| | ${bd_id1}= | Evaluate | ${nf_nodes} * (${nf_chain} - 1) + ${nf_chain}
+| | ${bd_id2}= | Evaluate | ${nf_nodes} * ${nf_chain} + ${nf_chain}
 | | :FOR | ${dut} | IN | @{duts}
-| | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if1} | ${1}
-| | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if2} | ${2}
+| | | ${dut_str}= | Convert To Lowercase | ${dut}
+| | | Add interface to bridge domain
+| | | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${nf_chain}_1}
+| | | ... | ${bd_id1}
+| | | Add interface to bridge domain
+| | | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${nf_chain}_2}
+| | | ... | ${bd_id2}
 | | | ${nf_id_frst}= | Evaluate | (${nf_chain}-${1}) * ${nf_nodes} + ${1}
 | | | ${nf_id_last}= | Evaluate | (${nf_chain}-${1}) * ${nf_nodes} + ${nf_nodes}
 | | | ${sid_frst}= | Evaluate | ${nf_id_frst} * ${2} - ${1}
@@ -695,10 +708,10 @@
 | | | ... | memif-${dut}_CNF | mid=${nf_id_last} | sid=${sid_last}
 | | | ... | memif_if=${dut}-memif-${nf_id_last}-if2
 | | | ... | rxq=${rxq} | txq=${rxq}
-| | | Add interface to bridge domain | ${nodes['${dut}']}
-| | | ... | ${${dut}-memif-${nf_id_frst}-if1} | ${1}
-| | | Add interface to bridge domain | ${nodes['${dut}']}
-| | | ... | ${${dut}-memif-${nf_id_last}-if2} | ${2}
+| | | Add interface to bridge domain
+| | | ... | ${nodes['${dut}']} | ${${dut}-memif-${nf_id_frst}-if1} | ${bd_id1}
+| | | Add interface to bridge domain
+| | | ... | ${nodes['${dut}']} | ${${dut}-memif-${nf_id_last}-if2} | ${bd_id2}
 
 | Initialize L2 Bridge Domain for multiple pipelines with memif pairs
 | | [Documentation]

diff --git a/tests/vpp/device/container_memif/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot
index a89ab8f..4a3da26 100644 (file)
--- a/tests/vpp/device/container_memif/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot
+++ b/tests/vpp/device/container_memif/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot
@@ -66,7 +66,8 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs | with_trace=${True}
-| | When Start containers for test | auto_scale=${False} | pinning=${False}
+| | When Initialize layer interface
+| | And Start containers for test | auto_scale=${False} | pinning=${False}
 | | And Initialize L2 Bridge Domain with memif pairs | auto_scale=${False}
 | | Then Send ICMPv4 bidirectionally and verify received packets
 | | ... | ${tg} | ${tg_if1} | ${tg_if2}

diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot
index f8f9dad..e1a223b 100644 (file)
--- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot
+++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot
@@ -78,7 +78,8 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
-| | When Start containers for test
+| | When Initialize layer interface
+| | And Start containers for test
 | | And Initialize L2 Bridge Domain with memif pairs
 | | Then Find NDR and PDR intervals using optimized search
 

diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot
index ba5f4ce..1679892 100644 (file)
--- a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot
+++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot
@@ -78,7 +78,8 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
-| | When Start containers for test
+| | When Initialize layer interface
+| | And Start containers for test
 | | And Initialize L2 Bridge Domain with memif pairs
 | | Then Find NDR and PDR intervals using optimized search
 

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot
index ad402b4..7095c26 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${10}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-10c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot
index 28211b1..9faefb0 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${10}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-10c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot
index c8d8dcd..b3a5c73 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${10}
+| ${nf_nodes}= | ${2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-10c2n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${10} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${10} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot
index 34439d6..7011e71 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${6}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c6n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot
index 2ea5c1f..1cf02ac 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${6}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c6n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot
index 71a12d2..9bde1b9 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${8}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c8n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot
index 1a7e81f..e8bee04 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${8}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c8n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot
index a38cd68..5092212 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${10}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c10n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot
index 955ad3a..e66dde9 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${10}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c10n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot
index fe292ca..6b8d910 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot
index 6ec74d6..ae2390f 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot
index 2dfee79..4a17aa4 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c2n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot
index c669d27..d9c5302 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c2n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot
index d77403a..c100f7b 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${4}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c4n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot
index ae20f14..2b7ad90 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${4}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c4n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot
index d7c5a88..235ebd5 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${4}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c4n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot
index 241d3ed..7e85d82 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${4}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c4n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot
index 9a00df1..af3fa7d 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${6}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c6n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot
index 01815d5..329e529 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${6}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c6n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot
index bc742e6..ba1f156 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${8}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c8n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot
index 5c033d5..804b7de 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot
@@ -56,6 +56,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${8}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c8n
 # Container
@@ -83,10 +85,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot
index 2452314..cd9719e 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${10}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c10n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot
index d1d7ee3..bbc8da9 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot
index 3c18a4d..63e66c8 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot
index 3ec2528..3366b1f 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c2n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot
index 7d81538..e0e02e9 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c2n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot
index fba4cc6..e7879e4 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c2n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot
index 72eb9ea..c33f180 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c2n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot
index 9935c5b..4efc267 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${4}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c4n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot
index f2d9ef9..35cd350 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${4}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c4n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot
index b5043b7..3e2b440 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${6}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c6n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot
index 6ab6e2b..63c2fbe 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot
index 26d057b..fcad197 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot
index 6935e82..a5cf0cf 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${6}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot
index e79bba7..3810020 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${6}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot
index be48f03..5705a97 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${6}
+| ${nf_nodes}= | ${2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c2n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot
index a7c45be..66860d6 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${6}
+| ${nf_nodes}= | ${2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c2n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot
index f2cde32..654738f 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${6}
+| ${nf_nodes}= | ${4}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c4n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${6} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot
index ea2cf47..ca7ec7b 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${8}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot
index 9c13ea9..7036190 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${8}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot
index 0021a17..40cb3dd 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${8}
+| ${nf_nodes}= | ${2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c2n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot
index e1cdb44..91b3b5c 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${8}
+| ${nf_nodes}= | ${2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c2n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot
index ae0bd4d..3a41566 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${10}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-10c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot
index fcd4c76..316352f 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${10}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-10c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot
index 5334b05..82d6391 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${10}
+| ${nf_nodes}= | ${2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-10c2n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${10} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${10} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot
index d8e1e76..31f82a5 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${10}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c10n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot
index 7cab2f9..96c5db6 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${10}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c10n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot
index 4a8a859..8bcc07d 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot
index 6165fa0..880f5b7 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot
index 854a568..8866cc1 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c2n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot
index e50ee39..184edf8 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c2n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot
index 08314f7..0cb1651 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${4}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c4n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot
index d0bbf9e..2943e3c 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${4}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c4n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot
index 15045ac..8f13d71 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${6}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c6n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot
index 19b31eb..b19ea39 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${6}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c6n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot
index c4e5e3e..6f6abf1 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${8}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c8n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot
index d35a65c..b5c366c 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${8}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c8n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot
index 5126b35..e6dd856 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${6}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c6n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot
index 43ab05c..fa740f3 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${6}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c6n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot
index 9bacdc0..f803660 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${8}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c8n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot
index 2184195..f0d27c8 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${8}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c8n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot
index 3fafda8..0966830 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${10}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c10n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot
index 181aa7c..1b72df7 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot
index 80d8939..0c555a7 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot
index 54fabb9..2de40ee 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c2n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot
index 858aba1..cef1098 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c2n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot
index ff6246b..20ddcd9 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${4}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c4n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface    
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot
index 61c5457..61f4805 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${4}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c4n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot
index 34d62c9..ada525e 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot
index d842ac6..c5fe624 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot
index 89ed6ce..eb2722f 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${4}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c4n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot
index 8a2763b..bd85786 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${4}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c4n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot
index eb6e872..7fa8978 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${6}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c6n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot
index 8e908e2..bc80ce1 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c2n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot
index 192b445..2814a82 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c2n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot
index b35701b..ab91a25 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${6}
+| ${nf_nodes}= | ${2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c2n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot
index 32de9ef..36142a8 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${6}
+| ${nf_nodes}= | ${2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c2n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot
index 4559794..61503b4 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${6}
+| ${nf_nodes}= | ${4}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c4n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${6} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot
index 3961cec..f89234d 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${6}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot
index f0396f6..3cf0f5e 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${6}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot
index 841f804..266eed5 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${8}
+| ${nf_nodes}= | ${2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c2n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot
index a322084..aef9d4b 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${8}
+| ${nf_nodes}= | ${2}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c2n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot
index a1263e4..a7f3b73 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${2}
 | ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${8}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot
index 0b8d9e5..cb70083 100644 (file)
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot
@@ -55,6 +55,8 @@
 | ${overhead}= | ${0}
 | ${nf_dtcr}= | ${1}
 | ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${8}
+| ${nf_nodes}= | ${1}
 # Traffic profile:
 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c1n
 # Container
@@ -82,10 +84,12 @@
 | | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
 | | And Start containers for test
-| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***