SKIP_PATCH for all PDR tests instead of NDR

Main motivation for this change is the latency reporting
for jobs skipping SKIP_PATCH tests.

Change-Id: Ib466d969c10eb547f3a53808e90e11d83c581d0d
Signed-off-by: Miroslav Miklus <mmiklus@cisco.com>

diff --git a/tests/perf/Long_Bridge_Domain_Intel-X520-DA2.robot b/tests/perf/Long_Bridge_Domain_Intel-X520-DA2.robot
index 549033f..113547b 100644 (file)
--- a/tests/perf/Long_Bridge_Domain_Intel-X520-DA2.robot
+++ b/tests/perf/Long_Bridge_Domain_Intel-X520-DA2.robot
@@ -50,7 +50,7 @@
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -72,7 +72,7 @@
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -96,7 +96,7 @@
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -118,7 +118,7 @@
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -142,7 +142,7 @@
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -163,7 +163,7 @@
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -186,7 +186,7 @@
 | | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -208,7 +208,7 @@
 | | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -344,7 +344,7 @@
 | | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -368,7 +368,7 @@
 | | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.
 | | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -459,7 +459,7 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame size
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame size
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_IMIX_v4_1}
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_IMIX_v4_1}


@@ -482,7 +482,7 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame size
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame size
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_IMIX_v4_1}
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_IMIX_v4_1}

diff --git a/tests/perf/Long_IPv4_Cop_Intel-X520-DA2.robot b/tests/perf/Long_IPv4_Cop_Intel-X520-DA2.robot
index 06bb0f9..df4cee7 100644 (file)
--- a/tests/perf/Long_IPv4_Cop_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv4_Cop_Intel-X520-DA2.robot
@@ -54,7 +54,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -83,7 +83,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -114,7 +114,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 1518 Byte frames using binary search start at 10GE linerate,
 | | ... | step 10kpps.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 1518 Byte frames using binary search start at 10GE linerate,
 | | ... | step 10kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -143,7 +143,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 1518 Byte frames using binary search start at 10GE linerate,
 | | ... | step 10kpps, LT=0.5%.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 1518 Byte frames using binary search start at 10GE linerate,
 | | ... | step 10kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -174,7 +174,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 9000 Byte frames using binary search start at 10GE linerate,
 | | ... | step 5kpps.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 9000 Byte frames using binary search start at 10GE linerate,
 | | ... | step 5kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -202,7 +202,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 9000 Byte frames using binary search start at 10GE linerate,
 | | ... | step 5kpps, LT=0.5%.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 9000 Byte frames using binary search start at 10GE linerate,
 | | ... | step 5kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -232,7 +232,7 @@
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -261,7 +261,7 @@
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -410,7 +410,7 @@
 | | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.
 | | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -439,7 +439,7 @@
 | | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.
 | | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}

diff --git a/tests/perf/Long_IPv4_Fib_200k_Intel-X520-DA2.robot b/tests/perf/Long_IPv4_Fib_200k_Intel-X520-DA2.robot
index 07634aa..3b91471 100644 (file)
--- a/tests/perf/Long_IPv4_Fib_200k_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv4_Fib_200k_Intel-X520-DA2.robot
@@ -52,7 +52,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -76,7 +76,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -102,7 +102,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -126,7 +126,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -152,7 +152,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -175,7 +175,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -200,7 +200,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -224,7 +224,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -348,7 +348,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -372,7 +372,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}

diff --git a/tests/perf/Long_IPv4_Fib_20k_Intel-X520-DA2.robot b/tests/perf/Long_IPv4_Fib_20k_Intel-X520-DA2.robot
index 543f1d9..7b2a2a1 100644 (file)
--- a/tests/perf/Long_IPv4_Fib_20k_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv4_Fib_20k_Intel-X520-DA2.robot
@@ -52,7 +52,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -76,7 +76,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -102,7 +102,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -126,7 +126,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -152,7 +152,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -175,7 +175,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -200,7 +200,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -224,7 +224,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -348,7 +348,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -372,7 +372,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}

diff --git a/tests/perf/Long_IPv4_Fib_2M_Intel-X520-DA2.robot b/tests/perf/Long_IPv4_Fib_2M_Intel-X520-DA2.robot
index 1944ba4..c00013a 100644 (file)
--- a/tests/perf/Long_IPv4_Fib_2M_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv4_Fib_2M_Intel-X520-DA2.robot
@@ -52,7 +52,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -76,7 +76,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -102,7 +102,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -126,7 +126,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -152,7 +152,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -175,7 +175,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -200,7 +200,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -224,7 +224,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -348,7 +348,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -372,7 +372,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}

diff --git a/tests/perf/Long_IPv4_Intel-X520-DA2.robot b/tests/perf/Long_IPv4_Intel-X520-DA2.robot
index 3236f93..1f49856 100644 (file)
--- a/tests/perf/Long_IPv4_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv4_Intel-X520-DA2.robot
@@ -54,7 +54,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -76,7 +76,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -100,7 +100,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -122,7 +122,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -146,7 +146,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -167,7 +167,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -190,7 +190,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -212,7 +212,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -326,7 +326,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -348,7 +348,7 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -464,7 +464,7 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame size
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame size
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_IMIX_v4_1}
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_IMIX_v4_1}


@@ -487,7 +487,7 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame size
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame size
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_IMIX_v4_1}
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_IMIX_v4_1}

diff --git a/tests/perf/Long_IPv4_iAcl_Intel-X520-DA2.robot b/tests/perf/Long_IPv4_iAcl_Intel-X520-DA2.robot
index 4d568a8..df3e336 100644 (file)
--- a/tests/perf/Long_IPv4_iAcl_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv4_iAcl_Intel-X520-DA2.robot
@@ -54,7 +54,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -91,7 +91,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -130,7 +130,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 1518 Byte frames using binary search start at 10GE linerate,
 | | ... | step 10kpps.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 1518 Byte frames using binary search start at 10GE linerate,
 | | ... | step 10kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -167,7 +167,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 1518 Byte frames using binary search start at 10GE linerate,
 | | ... | step 10kpps, LT=0.5%.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 1518 Byte frames using binary search start at 10GE linerate,
 | | ... | step 10kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -206,7 +206,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 9000 Byte frames using binary search start at 10GE linerate,
 | | ... | step 5kpps.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 9000 Byte frames using binary search start at 10GE linerate,
 | | ... | step 5kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -242,7 +242,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 9000 Byte frames using binary search start at 10GE linerate,
 | | ... | step 5kpps, LT=0.5%.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 9000 Byte frames using binary search start at 10GE linerate,
 | | ... | step 5kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -280,7 +280,7 @@
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -317,7 +317,7 @@
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -506,7 +506,7 @@
 | | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.
 | | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -543,7 +543,7 @@
 | | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.
 | | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 64 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}

diff --git a/tests/perf/Long_IPv6_Cop_Intel-X520-DA2.robot b/tests/perf/Long_IPv6_Cop_Intel-X520-DA2.robot
index a3755c0..c077f66 100644 (file)
--- a/tests/perf/Long_IPv6_Cop_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv6_Cop_Intel-X520-DA2.robot
@@ -52,7 +52,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -81,7 +81,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -112,7 +112,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 1518 Byte frames using binary search start at 10GE linerate,
 | | ... | step 10kpps.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 1518 Byte frames using binary search start at 10GE linerate,
 | | ... | step 10kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -141,7 +141,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 1518 Byte frames using binary search start at 10GE linerate,
 | | ... | step 10kpps, LT=0.5%.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 1518 Byte frames using binary search start at 10GE linerate,
 | | ... | step 10kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -172,7 +172,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 9000 Byte frames using binary search start at 10GE linerate,
 | | ... | step 5kpps.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 9000 Byte frames using binary search start at 10GE linerate,
 | | ... | step 5kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -200,7 +200,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 9000 Byte frames using binary search start at 10GE linerate,
 | | ... | step 5kpps, LT=0.5%.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 9000 Byte frames using binary search start at 10GE linerate,
 | | ... | step 5kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -230,7 +230,7 @@
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -259,7 +259,7 @@
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -408,7 +408,7 @@
 | | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.
 | | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -437,7 +437,7 @@
 | | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.
 | | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}

diff --git a/tests/perf/Long_IPv6_Fib_200k_Intel-X520-DA2.robot b/tests/perf/Long_IPv6_Fib_200k_Intel-X520-DA2.robot
index 470179e..10b2047 100644 (file)
--- a/tests/perf/Long_IPv6_Fib_200k_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv6_Fib_200k_Intel-X520-DA2.robot
@@ -52,7 +52,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -76,7 +76,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -102,7 +102,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -126,7 +126,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -152,7 +152,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -175,7 +175,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -200,7 +200,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -224,7 +224,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -348,7 +348,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -372,7 +372,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}

diff --git a/tests/perf/Long_IPv6_Fib_20k_Intel-X520-DA2.robot b/tests/perf/Long_IPv6_Fib_20k_Intel-X520-DA2.robot
index 0345939..fbd175c 100644 (file)
--- a/tests/perf/Long_IPv6_Fib_20k_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv6_Fib_20k_Intel-X520-DA2.robot
@@ -52,7 +52,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -76,7 +76,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -102,7 +102,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -126,7 +126,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -152,7 +152,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -175,7 +175,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -200,7 +200,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -224,7 +224,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -348,7 +348,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -372,7 +372,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}

diff --git a/tests/perf/Long_IPv6_Fib_2M_Intel-X520-DA2.robot b/tests/perf/Long_IPv6_Fib_2M_Intel-X520-DA2.robot
index fa4bab2..d598dc7 100644 (file)
--- a/tests/perf/Long_IPv6_Fib_2M_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv6_Fib_2M_Intel-X520-DA2.robot
@@ -52,7 +52,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -76,7 +76,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -102,7 +102,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -126,7 +126,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -152,7 +152,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -175,7 +175,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -200,7 +200,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -224,7 +224,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -348,7 +348,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -372,7 +372,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}

diff --git a/tests/perf/Long_IPv6_Intel-X520-DA2.robot b/tests/perf/Long_IPv6_Intel-X520-DA2.robot
index f89e6f3..d48402d 100644 (file)
--- a/tests/perf/Long_IPv6_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv6_Intel-X520-DA2.robot
@@ -48,7 +48,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -70,7 +70,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -94,7 +94,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -116,7 +116,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -140,7 +140,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -161,7 +161,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -184,7 +184,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -206,7 +206,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -320,7 +320,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -342,7 +342,7 @@
 | | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 78 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}

diff --git a/tests/perf/Long_IPv6_iAcl_Intel-X520-DA2.robot b/tests/perf/Long_IPv6_iAcl_Intel-X520-DA2.robot
index c0000ae..a6161f3 100644 (file)
--- a/tests/perf/Long_IPv6_iAcl_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv6_iAcl_Intel-X520-DA2.robot
@@ -52,7 +52,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -76,7 +76,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -102,7 +102,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 1518 Byte frames using binary search start at 10GE linerate,
 | | ... | step 10kpps.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 1518 Byte frames using binary search start at 10GE linerate,
 | | ... | step 10kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -126,7 +126,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 1518 Byte frames using binary search start at 10GE linerate,
 | | ... | step 10kpps, LT=0.5%.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 1518 Byte frames using binary search start at 10GE linerate,
 | | ... | step 10kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -152,7 +152,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 9000 Byte frames using binary search start at 10GE linerate,
 | | ... | step 5kpps.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 9000 Byte frames using binary search start at 10GE linerate,
 | | ... | step 5kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -175,7 +175,7 @@
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 9000 Byte frames using binary search start at 10GE linerate,
 | | ... | step 5kpps, LT=0.5%.
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 9000 Byte frames using binary search start at 10GE linerate,
 | | ... | step 5kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -200,7 +200,7 @@
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -224,7 +224,7 @@
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.
 | | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -348,7 +348,7 @@
 | | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.
 | | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}


@@ -372,7 +372,7 @@
 | | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.
 | | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR
 | | ... | for 78 Byte frames using binary search start at 10GE linerate,
 | | ... | step 100kpps, LT=0.5%.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}

diff --git a/tests/perf/Long_Xconnect_Dot1ad_Intel-X520-DA2.robot b/tests/perf/Long_Xconnect_Dot1ad_Intel-X520-DA2.robot
index 96ea290..a37ebbb 100644 (file)
--- a/tests/perf/Long_Xconnect_Dot1ad_Intel-X520-DA2.robot
+++ b/tests/perf/Long_Xconnect_Dot1ad_Intel-X520-DA2.robot
@@ -58,7 +58,7 @@
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}


@@ -89,7 +89,7 @@
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}


@@ -122,7 +122,7 @@
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1514 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1514 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 1514
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B}
 | | ${framesize}= | Set Variable | 1514
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B}


@@ -153,7 +153,7 @@
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1514 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1514 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 1514
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B}
 | | ${framesize}= | Set Variable | 1514
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B}


@@ -186,7 +186,7 @@
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9008B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9008B}


@@ -216,7 +216,7 @@
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9008B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9008B}


@@ -248,7 +248,7 @@
 | | ... | [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}


@@ -279,7 +279,7 @@
 | | ... | [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}


@@ -438,7 +438,7 @@
 | | ... | [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}


@@ -469,7 +469,7 @@
 | | ... | [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}

diff --git a/tests/perf/Long_Xconnect_Dot1q_Intel-X520-DA2.robot b/tests/perf/Long_Xconnect_Dot1q_Intel-X520-DA2.robot
index 5513694..1699130 100644 (file)
--- a/tests/perf/Long_Xconnect_Dot1q_Intel-X520-DA2.robot
+++ b/tests/perf/Long_Xconnect_Dot1q_Intel-X520-DA2.robot
@@ -54,7 +54,7 @@
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_68B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_68B}


@@ -84,7 +84,7 @@
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_68B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_68B}


@@ -116,7 +116,7 @@
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B}


@@ -146,7 +146,7 @@
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B}


@@ -178,7 +178,7 @@
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9004B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9004B}


@@ -207,7 +207,7 @@
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9004B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9004B}


@@ -238,7 +238,7 @@
 | | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_68B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_68B}


@@ -268,7 +268,7 @@
 | | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_68B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_68B}


@@ -422,7 +422,7 @@
 | | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_68B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_68B}


@@ -452,7 +452,7 @@
 | | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_68B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_68B}

diff --git a/tests/perf/Long_Xconnect_Intel-X520-DA2.robot b/tests/perf/Long_Xconnect_Intel-X520-DA2.robot
index 110ff4f..45518c4 100644 (file)
--- a/tests/perf/Long_Xconnect_Intel-X520-DA2.robot
+++ b/tests/perf/Long_Xconnect_Intel-X520-DA2.robot
@@ -50,7 +50,7 @@
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -72,7 +72,7 @@
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -96,7 +96,7 @@
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -118,7 +118,7 @@
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
 | | ${framesize}= | Set Variable | 1518
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}


@@ -142,7 +142,7 @@
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -163,7 +163,7 @@
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}


@@ -186,7 +186,7 @@
 | | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -208,7 +208,7 @@
 | | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -322,7 +322,7 @@
 | | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -344,7 +344,7 @@
 | | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.

-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}


@@ -459,7 +459,7 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame size
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame size
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR

 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_IMIX_v4_1}
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_IMIX_v4_1}


@@ -482,7 +482,7 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame size
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame size
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)

-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH

 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_IMIX_v4_1}
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_IMIX_v4_1}