-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
-# http://www.apache.org/licenses/LICENSE-2.0
+Vagrant.configure("2") do |config|
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
+ # Base box definition, currently using
+ # Official Ubuntu 18.04 LTS (Bionic Beaver) Daily Build
+ config.vm.box = "ubuntu/bionic64"
-# -*- mode: ruby -*-
-# vi: set ts=2 sw=2 sts=2 et ft=ruby :
-
-$user_addition = <<-SHELL
- sudo deluser csit
- sudo adduser --disabled-password --gecos "" csit
- echo csit:csit | sudo chpasswd
- sudo adduser csit vagrant
- id csit
- echo "csit ALL=(root) NOPASSWD:ALL" | sudo tee /etc/sudoers.d/csit
- sudo chmod 0440 /etc/sudoers.d/csit
-SHELL
-
-$install_prereqs = <<-SHELL
- sudo apt-get -y update
- sudo apt-get -y -f install
- sudo apt-get -y install python-virtualenv python-dev iproute2 debhelper dkms
- sudo update-alternatives --install /bin/sh sh /bin/bash 100
-SHELL
-
-$install_vpp = <<-SHELL
- sudo apt-get -y purge vpp\*
- cd /vagrant
- vpp_pkgs="$(echo vpp*.deb)"
- if [ "$vpp_pkgs" != "vpp*.deb" ]; then
- sudo dpkg -i vpp*.deb
- fi
-SHELL
-
-
-def add_dut(config, name, mgmt_ip, port1, port2, port3, port4)
- config.vm.box_check_update = false
- config.vm.define name do |node|
- node.vm.box = "fdio-csit/ubuntu-14.04.4_2016-05-25_1.0"
- node.vm.hostname = name
- node.vm.provision "shell", inline: $user_addition
- node.vm.provision "shell", inline: $install_prereqs
- node.vm.provision "shell", inline: $install_vpp
-
- node.vm.network "private_network", ip: mgmt_ip
- node.vm.network "private_network", type: "dhcp", auto_config: false, virtualbox__intnet: port1
- node.vm.network "private_network", type: "dhcp", auto_config: false, virtualbox__intnet: port2
- node.vm.network "private_network", type: "dhcp", auto_config: false, virtualbox__intnet: port3
- node.vm.network "private_network", type: "dhcp", auto_config: false, virtualbox__intnet: port4
- node.vm.provider "virtualbox" do |vb|
- vb.memory = "3232"
- vb.customize ["modifyvm", :id, "--nicpromisc3", "allow-all"]
- vb.customize ["modifyvm", :id, "--nicpromisc4", "allow-all"]
- vb.customize ["modifyvm", :id, "--nicpromisc5", "allow-all"]
- vb.customize ["modifyvm", :id, "--nicpromisc6", "allow-all"]
- end
- end
-end
+ # Disable automatic box update checking
+ config.vm.box_check_update = false
-net_prefix = ''
-if ENV.key?('VPP_VAGRANT_NET_PREFIX')
- net_prefix = ENV['VPP_VAGRANT_NET_PREFIX'] + '_'
-end
+ # Configure cached packages to be shared between instances of the same base box.
+ if Vagrant.has_plugin?("vagrant-cachier")
+ config.cache.scope = :box
+ end
-def add_tg(config, name, mgmt_ip, port1, port2, port3, port4, port5, port6)
- config.vm.box_check_update = false
- config.vm.define name do |node|
+ # Configure proxy if needed
if Vagrant.has_plugin?("vagrant-proxyconf")
- if ENV["http_proxy"]
- config.proxy.http = ENV["http_proxy"]
- end
- if ENV["https_proxy"]
- config.proxy.https = ENV["https_proxy"]
- end
- if ENV["no_proxy"]
- config.proxy.no_proxy = ENV["no_proxy"]
- end
+ config.proxy.http = "http://192.168.0.2:3128/"
+ config.proxy.https = "http://192.168.0.2:3128/"
+ config.proxy.ftp = "http://192.168.0.2:3128/"
+ config.proxy.no_proxy = "localhost,127.0.0.1"
end
- node.vm.box = "fdio-csit/ubuntu-14.04.4_2016-05-25_1.0"
- node.vm.hostname = name
- node.vm.provision "shell", inline: $user_addition
- node.vm.provision "shell", inline: $install_prereqs
-
- node.vm.network "private_network", ip: mgmt_ip
- node.vm.network "private_network", type: "dhcp", auto_config: false, virtualbox__intnet: port1
- node.vm.network "private_network", type: "dhcp", auto_config: false, virtualbox__intnet: port2
- node.vm.network "private_network", type: "dhcp", auto_config: false, virtualbox__intnet: port3
- node.vm.network "private_network", type: "dhcp", auto_config: false, virtualbox__intnet: port4
- node.vm.network "private_network", type: "dhcp", auto_config: false, virtualbox__intnet: port5
- node.vm.network "private_network", type: "dhcp", auto_config: false, virtualbox__intnet: port6
- node.vm.provider "virtualbox" do |vb|
- vb.memory = "2048"
- vb.customize ["modifyvm", :id, "--nicpromisc3", "allow-all"]
- vb.customize ["modifyvm", :id, "--nicpromisc4", "allow-all"]
- vb.customize ["modifyvm", :id, "--nicpromisc5", "allow-all"]
- vb.customize ["modifyvm", :id, "--nicpromisc6", "allow-all"]
- vb.customize ["modifyvm", :id, "--nicpromisc7", "allow-all"]
- vb.customize ["modifyvm", :id, "--nicpromisc8", "allow-all"]
+
+ # Configure testing network interfaces (TG)
+ config.vm.network "private_network", type: "dhcp", auto_config: false, virtualbox__intnet: "link1", nic_type: "82545EM", mac: "0800270fe04d"
+ config.vm.network "private_network", type: "dhcp", auto_config: false, virtualbox__intnet: "link2", nic_type: "82545EM", mac: "08002761f7ad"
+ config.vm.network "private_network", type: "dhcp", auto_config: false, virtualbox__intnet: "link3", nic_type: "82545EM", mac: "080027dc5da4"
+
+ # Configure testing network interfaces (SUT)
+ config.vm.network "private_network", type: "dhcp", auto_config: false, virtualbox__intnet: "link1", nic_type: "82545EM", mac: "080027385e58"
+ config.vm.network "private_network", type: "dhcp", auto_config: false, virtualbox__intnet: "link2", nic_type: "82545EM", mac: "080027e3f542"
+ config.vm.network "private_network", type: "dhcp", auto_config: false, virtualbox__intnet: "link3", nic_type: "82545EM", mac: "0800274f7c63"
+
+ # Virtualbox machine configuration
+ config.vm.provider "virtualbox" do |vb|
+ vb.name = "vppdevice-bionic"
+ # Run in headless mode
+ vb.gui = false
+
+ # Customize the amount of memory and CPUs assigned:
+ # - for VPP at least 3GB RAM and 2 cores is recommended
+ vb.memory = "8192"
+ vb.cpus = "4"
+
+ # Configure network testing interfaces
+ vb.customize ["modifyvm", :id, "--nicpromisc2", "allow-all"]
+ vb.customize ["modifyvm", :id, "--nicpromisc3", "allow-all"]
+ vb.customize ["modifyvm", :id, "--nicpromisc4", "allow-all"]
+ vb.customize ["modifyvm", :id, "--nicpromisc5", "allow-all"]
+ vb.customize ["modifyvm", :id, "--nicpromisc6", "allow-all"]
+ vb.customize ["modifyvm", :id, "--nicpromisc7", "allow-all"]
end
- end
-end
-Vagrant.configure(2) do |config|
- add_tg(config, "tg", "192.168.255.100/24", net_prefix + "tg_tg", net_prefix + "tg_tg", net_prefix + "tg_dut1_1", net_prefix + "tg_dut1_2", net_prefix + "tg_dut2_1", net_prefix + "tg_dut2_2")
- add_dut(config, "dut1", "192.168.255.101/24", net_prefix + "tg_dut1_1", net_prefix + "tg_dut1_2", net_prefix + "dut1_dut2_1", net_prefix + "dut1_dut2_2")
- add_dut(config, "dut2", "192.168.255.102/24", net_prefix + "tg_dut2_1", net_prefix + "tg_dut2_2", net_prefix + "dut1_dut2_1", net_prefix + "dut1_dut2_2")
+ # Provision the box using ansible local (no Ansible installation needed on host)
+ config.vm.provision "ansible_local" do |ansible|
+ ansible.version = "latest"
+ ansible.compatibility_mode = "2.0"
+ ansible.become = true
+ ansible.verbose = false
+ ansible.limit = "all"
+ ansible.inventory_path = "ansible/vppdevice"
+ ansible.playbook = "ansible/master.yml"
+ end
+
+ config.vm.post_up_message = <<-MESSAGE
+
+ Your virtual machine is configured!
+
+ Login to the box using command:
+ vagrant ssh
+
+ To run some tests use the VPP Device bootstrap script, eg:
+ cd /home/vagrant/csit/resources/libraries/bash/entry
+ ./bootstrap_vpp_device.sh csit-vpp-device-master-ubuntu1804-1n-vbox
+
+ To run only selected tests based on TAGS, export environment variables
+ before running the test suite:
+ export GERRIT_EVENT_TYPE="comment-added"
+ export GERRIT_EVENT_COMMENT_TEXT="devicetest memif"
+ ./bootstrap_vpp_device.sh csit-vpp-device-master-ubuntu1804-1n-vbox
+
+ For more information please visit:
+ https://docs.fd.io/csit/rls1810/report/index.html
+ https://docs.fd.io/csit/master/trending/
+
+ MESSAGE
+
end
--- /dev/null
+---
+# file: csit/tasks/main.yml
+
+- name: Upload config to rename network interfaces
+ copy:
+ src: files/99-vppdevice.yaml
+ dest: /etc/netplan/99-vppdevice.yaml
+ owner: root
+ group: root
+ mode: 0644
+
+- name: Apply network config changes
+ command: /usr/sbin/netplan apply
+
+- name: Install required system tools and packages
+ apt:
+ name:
+ - wget
+ - curl
+ - python-pip
+ - virtualenv
+ - libpcap-dev
+ state: present
+
+- name: Adjust number of hugepages
+ sysctl:
+ name: vm.nr_hugepages
+ value: 512
+ state: present
+ sysctl_file: /etc/sysctl.d/90-csit.conf
+ reload: yes
+
+- name: Add an Apt signing key, for docker-ce repository
+ apt_key:
+ url: https://download.docker.com/linux/ubuntu/gpg
+ state: present
+
+- name: Add docker-ce apt repository if not present
+ apt_repository:
+ repo: "deb https://download.docker.com/linux/ubuntu {{ ansible_distribution_release }} stable"
+ state: present
+
+- name: Install docker-ce if it's not already installed
+ apt:
+ name: docker-ce
+ state: present
+
+- name: "Add user for running tests: {{ csit.test_user.name }}"
+ user:
+ name: "{{ csit.test_user.name }}"
+ password: "{{ csit.test_user.password }}"
+ home: "{{ csit.test_user.home }}"
+ shell: "{{ csit.test_user.shell }}"
+
+- name: "Allow passwordless sudo for user: {{ csit.test_user.name }}"
+ lineinfile:
+ path: "/etc/sudoers.d/{{ csit.test_user.name }}"
+ line: "{{ csit.test_user.name }} ALL=(ALL) NOPASSWD:ALL"
+ create: yes
+
+- name: Add vagrant user to docker group
+ user:
+ name: vagrant
+ groups:
+ - docker
+
+- name: Reload groups for current session
+ command: /usr/bin/newgrp docker
+
+- name: Load required kernel modules
+ modprobe:
+ name: "{{ item }}"
+ state: present
+ with_items:
+ - vfio-pci
+
+- name: Enable required kernel modules on boot
+ lineinfile:
+ path: /etc/modules
+ line: "{{ item }}"
+ state: present
+ insertafter: EOF
+ with_items:
+ - vfio-pci
+
+- name: Clone CSIT repository
+ become_user: vagrant
+ git:
+ repo: "{{ csit.repository.url }}"
+ dest: "{{ csit.home }}"
+ accept_hostkey: yes
+ version: "{{ csit.repository.version }}"
+
+- name: Install and update pip and virtualenv
+ become_user: vagrant
+ pip:
+ name:
+ - pip
+ - virtualenv
+ state: latest
+
+- name: Prepare python virtual environmant for CSIT
+ become_user: vagrant
+ command: "/usr/bin/virtualenv {{ csit.home }}/env"
+ args:
+ chdir: "{{ csit.home }}"
+ creates: "{{ csit.home }}/env/bin/activate"
+
+- name: Install python dependencies (from {{ csit.home }}/requirements.txt)
+ become_user: vagrant
+ shell: source {{ csit.home }}/env/bin/activate && pip install --timeout 300 -r {{ csit.home }}/requirements.txt
+ args:
+ executable: /bin/bash
+
+- name: Load csit docker image from local drive if it exists (/vagrant/csit-sut.tar)
+ shell: |
+ if [ -z "$(docker images -q `cat {{ csit.home }}/VPP_DEVICE_IMAGE`)" ] && [ -e /vagrant/csit-sut.tar ]; then
+ docker load -i /vagrant/csit-sut.tar;
+ fi;
+ ignore_errors: yes
Code Review / csit.git / commitdiff