from collections import OrderedDict, Counter
from io import open
+from re import search
from string import Template
+from time import sleep
from robot.libraries.BuiltIn import BuiltIn
from resources.libraries.python.Constants import Constants
+from resources.libraries.python.CpuUtils import CpuUtils
from resources.libraries.python.ssh import SSH
from resources.libraries.python.topology import Topology, SocketType
from resources.libraries.python.VppConfigGenerator import VppConfigGenerator
self.engine.container = self.containers[container]
self.engine.restart_vpp()
+ def verify_vpp_in_all_containers(self):
+ """Verify that VPP is installed and running in all containers."""
+ for container in self.containers:
+ self.engine.container = self.containers[container]
+ self.engine.verify_vpp()
+
def configure_vpp_in_all_containers(self, chain_topology, **kwargs):
"""Configure VPP in all containers.
mid1=mid1, mid2=mid2, sid1=sid1, sid2=sid2,
guest_dir=guest_dir, **kwargs
)
+ elif chain_topology == u"chain_vswitch":
+ self._configure_vpp_chain_vswitch(
+ mid1=mid1, mid2=mid2, sid1=sid1, sid2=sid2,
+ guest_dir=guest_dir, **kwargs)
+ elif chain_topology == u"chain_ipsec":
+ idx_match = search(r"\d+$", self.engine.container.name)
+ if idx_match:
+ idx = int(idx_match.group())
+ self._configure_vpp_chain_ipsec(
+ mid1=mid1, mid2=mid2, sid1=sid1, sid2=sid2,
+ guest_dir=guest_dir, nf_instance=idx, **kwargs)
else:
raise RuntimeError(
f"Container topology {chain_topology} not implemented"
vif1_mac=vif1_mac, vif2_mac=vif2_mac
)
+ def _configure_vpp_chain_vswitch(self, **kwargs):
+ """Configure VPP as vswitch in container.
+
+ :param kwargs: Named parameters.
+ :param kwargs: dict
+ """
+ dut = self.engine.container.name.split(u"_")[0]
+ if dut == u"DUT1":
+ if1_pci = Topology.get_interface_pci_addr(
+ self.engine.container.node, kwargs[u"dut1_if2"])
+ if2_pci = Topology.get_interface_pci_addr(
+ self.engine.container.node, kwargs[u"dut1_if1"])
+ if_red_name = Topology.get_interface_name(
+ self.engine.container.node, kwargs[u"dut1_if2"])
+ if_black_name = Topology.get_interface_name(
+ self.engine.container.node, kwargs[u"dut1_if1"])
+ tg_if_ip4 = kwargs[u"tg_if2_ip4"]
+ tg_if_mac = kwargs[u"tg_if2_mac"]
+ else:
+ tg_if_ip4 = kwargs[u"tg_if1_ip4"]
+ tg_if_mac = kwargs[u"tg_if1_mac"]
+ if1_pci = Topology.get_interface_pci_addr(
+ self.engine.container.node, kwargs[u"dut2_if1"])
+ if2_pci = Topology.get_interface_pci_addr(
+ self.engine.container.node, kwargs[u"dut2_if2"])
+ if_red_name = Topology.get_interface_name(
+ self.engine.container.node, kwargs[u"dut2_if1"])
+ if_black_name = Topology.get_interface_name(
+ self.engine.container.node, kwargs[u"dut2_if2"])
+
+ n_instances = int(kwargs[u"n_instances"])
+ rxq = 1
+ if u"rxq" in kwargs:
+ rxq = int(kwargs[u"rxq"])
+ buffers = 215040
+ if u"buffers" in kwargs:
+ buffers = int(kwargs[u"buffers"])
+ nodes = kwargs[u"nodes"]
+ cpuset_cpus = CpuUtils.get_affinity_nf(
+ nodes, dut, nf_chains=1, nf_nodes=1, nf_chain=1,
+ nf_node=1, vs_dtc=0, nf_dtc=8, nf_mtcr=1, nf_dtcr=1
+ )
+ self.engine.create_vpp_startup_config_vswitch(
+ cpuset_cpus, rxq, buffers, if1_pci, if2_pci
+ )
+
+ instances = []
+ for i in range(1, n_instances + 1):
+ instances.append(
+ f"create interface memif id {i} socket-id 1 master\n"
+ f"set interface state memif1/{i} up\n"
+ f"set interface l2 bridge memif1/{i} 1\n"
+ f"create interface memif id {i} socket-id 2 master\n"
+ f"set interface state memif2/{i} up\n"
+ f"set interface l2 bridge memif2/{i} 2\n"
+ f"set ip arp memif2/{i} {tg_if_ip4} {tg_if_mac} "
+ f"static\n\n"
+ )
+
+ self.engine.create_vpp_exec_config(
+ u"memif_create_chain_vswitch_ipsec.exec",
+ socket1=f"{kwargs[u'guest_dir']}/{dut}_memif-vswitch-1",
+ socket2=f"{kwargs[u'guest_dir']}/{dut}_memif-vswitch-2",
+ if_red_name=if_red_name,
+ if_black_name=if_black_name,
+ instances=u"\n\n".join(instances))
+
+
+ def _configure_vpp_chain_ipsec(self, **kwargs):
+ """Configure VPP in container with memifs.
+
+ :param kwargs: Named parameters.
+ :param kwargs: dict
+ """
+ nf_nodes = int(kwargs[u"nf_nodes"])
+ nf_instance = int(kwargs[u"nf_instance"])
+ nodes = kwargs[u"nodes"]
+ dut = self.engine.container.name.split(u"_")[0]
+ cpuset_cpus = CpuUtils.get_affinity_nf(
+ nodes, dut, nf_chains=1, nf_nodes=nf_nodes, nf_chain=1,
+ nf_node=nf_instance, vs_dtc=10, nf_dtc=1, nf_mtcr=1, nf_dtcr=1)
+ self.engine.create_vpp_startup_config_ipsec(cpuset_cpus)
+ local_ip_base = kwargs[u"dut2_if1_ip4"].rsplit(u".", 1)[0]
+
+ if dut == u"DUT1":
+ tnl_local_ip = f"{local_ip_base}.{nf_instance + 100}"
+ tnl_remote_ip = f"{local_ip_base}.{nf_instance}"
+ remote_ip_base = kwargs[u"dut1_if1_ip4"].rsplit(u".", 1)[0]
+ tg_if_ip4 = kwargs[u"tg_if1_ip4"]
+ tg_if_mac = kwargs[u"tg_if1_mac"]
+ raddr_ip4 = kwargs[u"laddr_ip4"]
+ l_mac1 = 17
+ l_mac2 = 18
+ r_mac = 1
+ else:
+ tnl_local_ip = f"{local_ip_base}.{nf_instance}"
+ tnl_remote_ip = f"{local_ip_base}.{nf_instance + 100}"
+ remote_ip_base = kwargs[u"dut2_if2_ip4"].rsplit(u".", 1)[0]
+ tg_if_ip4 = kwargs[u"tg_if2_ip4"]
+ tg_if_mac = kwargs[u"tg_if2_mac"]
+ raddr_ip4 = kwargs[u"raddr_ip4"]
+ l_mac1 = 1
+ l_mac2 = 2
+ r_mac = 17
+
+ self.engine.create_vpp_exec_config(
+ u"memif_create_chain_ipsec.exec",
+ socket1=f"{kwargs['guest_dir']}/{dut}_memif-vswitch-1",
+ socket2=f"{kwargs['guest_dir']}/{dut}_memif-vswitch-2",
+ mid1=nf_instance,
+ mid2=nf_instance,
+ sid1=u"1",
+ sid2=u"2",
+ mac1=f"02:02:00:00:{l_mac1:02X}:{(nf_instance - 1):02X}",
+ mac2=f"02:02:00:00:{l_mac2:02X}:{(nf_instance - 1):02X}",
+ tg_if2_ip4=tg_if_ip4,
+ tg_if2_mac=tg_if_mac,
+ raddr_ip4=raddr_ip4,
+ tnl_local_ip=tnl_local_ip,
+ tnl_remote_ip=tnl_remote_ip,
+ tnl_remote_mac=f"02:02:00:00:{r_mac:02X}:{(nf_instance - 1):02X}",
+ remote_ip=f"{remote_ip_base}.{nf_instance}"
+ )
+ self.engine.execute(
+ f"cat {kwargs['guest_dir']}/ipsec_create_tunnel_cnf_"
+ f"{dut}_{nf_instance}.config >> /tmp/running.exec"
+ )
+
def _configure_vpp_pipeline_ip4(self, **kwargs):
"""Configure VPP in pipeline topology with ip4.
self.container.node,
SocketType.PAPI,
self.container.name,
- f"{self.container.root}/tmp/vpp_sockets/{self.container.name}/"
- f"api.sock"
+ f"/tmp/vpp_sockets/{self.container.name}/api.sock"
)
topo_instance.add_new_socket(
self.container.node,
SocketType.STATS,
self.container.name,
- f"{self.container.root}/tmp/vpp_sockets/{self.container.name}/"
- f"stats.sock"
+ f"/tmp/vpp_sockets/{self.container.name}/stats.sock"
)
def restart_vpp(self):
self.execute(u"supervisorctl restart vpp")
self.execute(u"cat /tmp/supervisord.log")
- def create_base_vpp_startup_config(self):
+ # TODO Rewrite .execute to accept retries parameter and get rid of this
+ # function.
+ def verify_vpp(self, retries=120, retry_wait=1):
+ """Verify that VPP is installed and running inside container.
+
+ :param retries: Check for VPP for this number of times Default: 120
+ :param retry_wait: Wait for this number of seconds between retries.
+
+ """
+ cmd = (u"vppctl show pci 2>&1 | "
+ u"fgrep -v 'Connection refused' | "
+ u"fgrep -v 'No such file or directory'")
+
+ for _ in range(retries + 1):
+ try:
+ self.execute(cmd)
+ break
+ except RuntimeError:
+ sleep(retry_wait)
+ else:
+ msg = f"VPP did not come up in container: {self.container.name}"
+ raise RuntimeError(msg)
+
+ def create_base_vpp_startup_config(self, cpuset_cpus=None):
"""Create base startup configuration of VPP on container.
:returns: Base VPP startup configuration.
:rtype: VppConfigGenerator
"""
- cpuset_cpus = self.container.cpuset_cpus
+ if cpuset_cpus is None:
+ cpuset_cpus = self.container.cpuset_cpus
# Create config instance
vpp_config = VppConfigGenerator()
# Apply configuration
self.execute(u"mkdir -p /etc/vpp/")
self.execute(
- f'echo "{vpp_config.get_config_str()}" | '
- f'tee /etc/vpp/startup.conf'
+ f'echo "{vpp_config.get_config_str()}" | tee /etc/vpp/startup.conf'
)
def create_vpp_startup_config_func_dev(self):
# Apply configuration
self.execute(u"mkdir -p /etc/vpp/")
self.execute(
- f'echo "{vpp_config.get_config_str()}" | '
- f'tee /etc/vpp/startup.conf'
+ f'echo "{vpp_config.get_config_str()}" | tee /etc/vpp/startup.conf'
+ )
+
+ def create_vpp_startup_config_vswitch(self, cpuset_cpus, rxq, buffers,
+ *devices):
+ """Create startup configuration of VPP vswitch.
+
+ :param cpuset_cpus: CPU list to run on.
+ :param rxq: Number of interface RX queues.
+ :param buffers: Number of buffers per numa.
+ :param devices: List of PCI devices to add.
+ :type cpuset_cpus: list
+ :type rxq: int
+ :type buffers: int
+ :type devices: list
+ """
+ vpp_config = self.create_base_vpp_startup_config(cpuset_cpus)
+ vpp_config.add_dpdk_dev(*devices)
+ vpp_config.add_dpdk_log_level(u"debug")
+ vpp_config.add_plugin(u"disable", u"default")
+ vpp_config.add_plugin(u"enable", u"dpdk_plugin.so")
+ vpp_config.add_plugin(u"enable", u"memif_plugin.so")
+ vpp_config.add_dpdk_no_tx_checksum_offload()
+ vpp_config.add_buffers_per_numa(buffers)
+ vpp_config.add_dpdk_dev_default_rxq(rxq)
+
+ # Apply configuration
+ self.execute(u"mkdir -p /etc/vpp/")
+ self.execute(
+ f'echo "{vpp_config.get_config_str()}" | tee /etc/vpp/startup.conf'
+ )
+
+ def create_vpp_startup_config_ipsec(self, cpuset_cpus):
+ """Create startup configuration of VPP with IPsec on container.
+
+ :param cpuset_cpus: CPU list to run on.
+ :type cpuset_cpus: list
+ """
+ vpp_config = self.create_base_vpp_startup_config(cpuset_cpus)
+ vpp_config.add_plugin(u"disable", u"default")
+ vpp_config.add_plugin(u"enable", u"memif_plugin.so")
+ vpp_config.add_plugin(u"enable", u"crypto_ia32_plugin.so")
+ vpp_config.add_plugin(u"enable", u"crypto_ipsecmb_plugin.so")
+ vpp_config.add_plugin(u"enable", u"crypto_openssl_plugin.so")
+ vpp_config.add_heapsize(u"4G")
+ vpp_config.add_ip_heap_size(u"4G")
+ vpp_config.add_statseg_size(u"4G")
+
+ # Apply configuration
+ self.execute(u"mkdir -p /etc/vpp/")
+ self.execute(
+ f'echo "{vpp_config.get_config_str()}" | tee /etc/vpp/startup.conf'
)
def create_vpp_exec_config(self, template_file, **kwargs):
:param node: DUT Node in the topology.
:type node: dict
"""
- if node['type'] == NodeType.DUT and self.is_core_limit_enabled():
+ if node[u"type"] == NodeType.DUT and self.is_core_limit_enabled():
vpp_pid = DUTSetup.get_vpp_pid(node)
self.enable_coredump_limit(node, vpp_pid)
if disable_on_success:
self.set_core_limit_disabled()
except RuntimeError:
- # If compress was not successful ignore error and skip further
- # processing.
+ # If compress was not successful ignore error and skip
+ # further processing.
continue
:type node: dict
:type service: str
"""
+ DUTSetup.get_service_logs(node, service)
+
command = f"supervisorctl stop {service}" \
if DUTSetup.running_in_container(node) \
else f"service {service} stop"
node, command, timeout=180, sudo=True, message=message
)
- DUTSetup.get_service_logs(node, service)
-
@staticmethod
def stop_service_on_all_duts(nodes, service):
"""Stop the named service on all DUTs.
from resources.libraries.python.InterfaceUtil import InterfaceUtil, \
InterfaceStatusFlags
from resources.libraries.python.PapiExecutor import PapiSocketExecutor
+from resources.libraries.python.ssh import scp_node
from resources.libraries.python.topology import Topology
from resources.libraries.python.VatExecutor import VatExecutor
add(cmd3, history=history, **args3)
papi_exec.get_replies(err_msg)
+ @staticmethod
+ def _create_ipsec_script_files(dut, instances):
+ """Create script files for configuring IPsec in containers
+
+ :param dut: DUT node on which to create the script files
+ :param instances: number of containers on DUT node
+ :type dut: string
+ :type instances: int
+ """
+ scripts = []
+ for cnf in range(0, instances):
+ script_filename = (
+ f"/tmp/ipsec_create_tunnel_cnf_{dut}_{cnf + 1}.config"
+ )
+ scripts.append(open(script_filename, 'w'))
+ return scripts
+
+ @staticmethod
+ def _close_and_copy_ipsec_script_files(
+ dut, nodes, instances, scripts):
+ """Close created scripts and copy them to containers
+
+ :param dut: DUT node on which to create the script files
+ :param nodes: VPP nodes
+ :param instances: number of containers on DUT node
+ :param scripts: dictionary holding the script files
+ :type dut: string
+ :type nodes: dict
+ :type instances: int
+ :type scripts: dict
+ """
+ for cnf in range(0, instances):
+ scripts[cnf].close()
+ script_filename = (
+ f"/tmp/ipsec_create_tunnel_cnf_{dut}_{cnf + 1}.config"
+ )
+ scp_node(nodes[dut], script_filename, script_filename)
+
+
+ @staticmethod
+ def vpp_ipsec_create_tunnel_interfaces_in_containers(
+ nodes, if1_ip_addr, if2_ip_addr, if1_key, if2_key, n_tunnels,
+ crypto_alg, integ_alg, raddr_ip1, raddr_ip2, raddr_range,
+ n_instances):
+ """Create multiple IPsec tunnel interfaces between two VPP nodes.
+
+ :param nodes: VPP nodes to create tunnel interfaces.
+ :param if1_ip_addr: VPP node 1 interface IP4 address.
+ :param if2_ip_addr: VPP node 2 interface IP4 address.
+ :param if1_key: VPP node 1 interface key from topology file.
+ :param if2_key: VPP node 2 interface key from topology file.
+ :param n_tunnels: Number of tunnell interfaces to create.
+ :param crypto_alg: The encryption algorithm name.
+ :param integ_alg: The integrity algorithm name.
+ :param raddr_ip1: Policy selector remote IPv4 start address for the
+ first tunnel in direction node1->node2.
+ :param raddr_ip2: Policy selector remote IPv4 start address for the
+ first tunnel in direction node2->node1.
+ :param raddr_range: Mask specifying range of Policy selector Remote
+ IPv4 addresses. Valid values are from 1 to 32.
+ :param n_instances: Number of containers.
+ :type nodes: dict
+ :type if1_ip_addr: str
+ :type if2_ip_addr: str
+ :type if1_key: str
+ :type if2_key: str
+ :type n_tunnels: int
+ :type crypto_alg: CryptoAlg
+ :type integ_alg: IntegAlg
+ :type raddr_ip1: string
+ :type raddr_ip2: string
+ :type raddr_range: int
+ :type n_instances: int
+ """
+ spi_1 = 100000
+ spi_2 = 200000
+ addr_incr = 1 << (32 - raddr_range)
+
+ dut1_scripts = IPsecUtil._create_ipsec_script_files(
+ u"DUT1", n_instances)
+ dut2_scripts = IPsecUtil._create_ipsec_script_files(
+ u"DUT2", n_instances)
+
+ for cnf in range(0, n_instances):
+ dut1_scripts[cnf].write(
+ u"create loopback interface\n"
+ u"set interface state loop0 up\n\n"
+ )
+ dut2_scripts[cnf].write(
+ f"ip route add {if1_ip_addr}/8 via "
+ f"{ip_address(if2_ip_addr) + cnf + 100} memif1/{cnf + 1}\n\n"
+ )
+
+ for tnl in range(0, n_tunnels):
+ tnl_incr = tnl * addr_incr
+ cnf = tnl % n_instances
+ i = tnl // n_instances
+ ckey = gen_key(IPsecUtil.get_crypto_alg_key_len(crypto_alg)).hex()
+ integ = u""
+ if integ_alg:
+ ikey = gen_key(IPsecUtil.get_integ_alg_key_len(integ_alg)).hex()
+ integ = (
+ f"integ-alg {integ_alg.alg_name} "
+ f"local-integ-key {ikey} "
+ f"remote-integ-key {ikey} "
+ )
+
+ # Configure tunnel end point(s) on left side
+ dut1_scripts[cnf].write(
+ u"set interface ip address loop0 "
+ f"{ip_address(if1_ip_addr) + tnl_incr}/32\n"
+ f"create ipsec tunnel "
+ f"local-ip {ip_address(if1_ip_addr) + tnl_incr} "
+ f"local-spi {spi_1 + tnl} "
+ f"remote-ip {ip_address(if2_ip_addr) + cnf} "
+ f"remote-spi {spi_2 + tnl} "
+ f"crypto-alg {crypto_alg.alg_name} "
+ f"local-crypto-key {ckey} "
+ f"remote-crypto-key {ckey} "
+ f"instance {i} "
+ f"salt 0x0 "
+ f"{integ} \n"
+ f"set interface unnumbered ipip{i} use loop0\n"
+ f"set interface state ipip{i} up\n"
+ f"ip route add {ip_address(raddr_ip2)+tnl}/32 via ipip{i}\n\n"
+ )
+
+ # Configure tunnel end point(s) on right side
+ dut2_scripts[cnf].write(
+ f"set ip arp memif1/{cnf + 1} "
+ f"{ip_address(if1_ip_addr) + tnl_incr} "
+ f"02:02:00:00:{17:02X}:{cnf:02X} static\n"
+ f"create ipsec tunnel local-ip {ip_address(if2_ip_addr) + cnf} "
+ f"local-spi {spi_2 + tnl} "
+ f"remote-ip {ip_address(if1_ip_addr) + tnl_incr} "
+ f"remote-spi {spi_1 + tnl} "
+ f"crypto-alg {crypto_alg.alg_name} "
+ f"local-crypto-key {ckey} "
+ f"remote-crypto-key {ckey} "
+ f"instance {i} "
+ f"salt 0x0 "
+ f"{integ}\n"
+ f"set interface unnumbered ipip{i} use memif1/{cnf + 1}\n"
+ f"set interface state ipip{i} up\n"
+ f"ip route add {ip_address(raddr_ip1) + tnl}/32 via ipip{i}\n\n"
+ )
+
+ IPsecUtil._close_and_copy_ipsec_script_files(
+ u"DUT1", nodes, n_instances, dut1_scripts)
+ IPsecUtil._close_and_copy_ipsec_script_files(
+ u"DUT2", nodes, n_instances, dut2_scripts)
+
@staticmethod
def vpp_ipsec_add_multiple_tunnels(
nodes, interface1, interface2, n_tunnels, crypto_alg, integ_alg,
first tunnel in direction node1->node2.
:param raddr_ip2: Policy selector remote IPv4 start address for the
first tunnel in direction node2->node1.
- :param raddr_range: Mask specifying range of Policy selector Remote IPv4
- addresses. Valid values are from 1 to 32.
+ :param raddr_range: Mask specifying range of Policy selector Remote
+ IPv4 addresses. Valid values are from 1 to 32.
:type nodes: dict
:type interface1: str or int
:type interface2: str or int
for node in nodes.values():
if node[u"type"] == NodeType.DUT:
- PapiSocketExecutor.run_cli_cmd(node, f"show trace {maximum}")
+ PapiSocketExecutor.run_cli_cmd_on_all_sockets(
+ node, f"show trace {maximum}")
@staticmethod
def clear_packet_trace_on_all_duts(nodes):
"""
for node in nodes.values():
if node[u"type"] == NodeType.DUT:
- PapiSocketExecutor.run_cli_cmd(node, u"clear trace")
+ PapiSocketExecutor.run_cli_cmd_on_all_sockets(
+ node, u"clear trace")
from resources.libraries.python.DUTSetup import DUTSetup
from resources.libraries.python.PapiExecutor import PapiSocketExecutor
from resources.libraries.python.ssh import exec_cmd_no_error
-from resources.libraries.python.topology import NodeType
+from resources.libraries.python.topology import Topology, SocketType, NodeType
class VPPUtil:
exec_cmd_no_error(node, command, timeout=30, sudo=True)
@staticmethod
- def restart_vpp_service(node):
+ def restart_vpp_service(node, node_key=None):
"""Restart VPP service on the specified topology node.
:param node: Topology node.
+ :param node_key: Topology node key.
:type node: dict
+ :type node_key: str
"""
DUTSetup.restart_service(node, Constants.VPP_UNIT)
+ if node_key:
+ Topology.add_new_socket(
+ node, SocketType.PAPI, node_key, Constants.SOCKSVR_PATH)
+ Topology.add_new_socket(
+ node, SocketType.STATS, node_key, Constants.SOCKSTAT_PATH)
@staticmethod
def restart_vpp_service_on_all_duts(nodes):
:param nodes: Topology nodes.
:type nodes: dict
"""
- for node in nodes.values():
+ for node_key, node in nodes.items():
if node[u"type"] == NodeType.DUT:
- VPPUtil.restart_vpp_service(node)
+ VPPUtil.restart_vpp_service(node, node_key)
@staticmethod
- def stop_vpp_service(node):
+ def stop_vpp_service(node, node_key=None):
"""Stop VPP service on the specified topology node.
:param node: Topology node.
+ :param node_key: Topology node key.
:type node: dict
+ :type node_key: str
"""
DUTSetup.stop_service(node, Constants.VPP_UNIT)
+ if node_key:
+ Topology.del_node_socket_id(node, SocketType.PAPI, node_key)
+ Topology.del_node_socket_id(node, SocketType.STATS, node_key)
@staticmethod
def stop_vpp_service_on_all_duts(nodes):
:param nodes: Topology nodes.
:type nodes: dict
"""
- for node in nodes.values():
+ for node_key, node in nodes.items():
if node[u"type"] == NodeType.DUT:
- VPPUtil.stop_vpp_service(node)
+ VPPUtil.stop_vpp_service(node, node_key)
@staticmethod
def verify_vpp_installed(node):
for cmd in cmds:
try:
- PapiSocketExecutor.run_cli_cmd(node, cmd)
+ PapiSocketExecutor.run_cli_cmd_on_all_sockets(node, cmd)
except AssertionError:
if fail_on_error:
raise
:param node: Topology node.
:type node: dict
"""
- PapiSocketExecutor.run_cli_cmd(node, "elog trace api cli barrier")
+ PapiSocketExecutor.run_cli_cmd_on_all_sockets(
+ node, u"elog trace api cli barrier")
@staticmethod
def vpp_enable_elog_traces_on_all_duts(nodes):
:param node: Topology node.
:type node: dict
"""
- PapiSocketExecutor.run_cli_cmd(node, u"show event-logger")
+ PapiSocketExecutor.run_cli_cmd_on_all_sockets(
+ node, u"show event-logger")
@staticmethod
def show_event_logger_on_all_duts(nodes):
"""Initialize library."""
# VPP Node to apply configuration on
self._node = u""
- # VPP Hostname
- self._hostname = u""
+ # Topology node key
+ self._node_key = u""
# VPP Configuration
self._nodeconfig = dict()
# Serialized VPP Configuration
# VPP Startup config backup location
self._vpp_startup_conf_backup = None
- def set_node(self, node):
+ def set_node(self, node, node_key=None):
"""Set DUT node.
:param node: Node to store configuration on.
+ :param node_key: Topology node key.
:type node: dict
+ :type node_key: str
:raises RuntimeError: If Node type is not DUT.
"""
if node[u"type"] != NodeType.DUT:
u"Startup config can only be applied to DUTnode."
)
self._node = node
- self._hostname = Topology.get_node_hostname(node)
+ self._node_key = node_key
def set_vpp_logfile(self, logfile):
"""Set VPP logfile location.
"""
self.write_config(filename=filename)
- VPPUtil.restart_vpp_service(self._node)
+ VPPUtil.restart_vpp_service(self._node, self._node_key)
if verify_vpp:
VPPUtil.verify_vpp(self._node)
:param node: Node to run command on.
:type node: dict
"""
- PapiSocketExecutor.run_cli_cmd(
+ PapiSocketExecutor.run_cli_cmd_on_all_sockets(
node, u"show memory verbose api-segment stats-segment main-heap"
)
return safe_load(work_file.read())[u"nodes"]
-
class NodeType:
"""Defines node types used in topology dictionaries."""
- # TODO: Two letter initialisms are well-known, but too short for pylint.
- # Candidates: TG -> TGN, VM -> VNF.
-
# Device Under Test (this node has VPP running on it)
DUT = u"DUT"
# Traffic Generator (this node has traffic generator on it)
does not rely on the data retrieved from nodes, this allows to call most of
the methods without having filled active topology with internal nodes data.
"""
-
- def add_node_item(self, node, value, path):
+ @staticmethod
+ def add_node_item(node, value, path):
"""Add item to topology node.
:param node: Topology node.
elif isinstance(node[path[0]], str):
node[path[0]] = dict() if node[path[0]] == u"" \
else {node[path[0]]: u""}
- self.add_node_item(node[path[0]], value, path[1:])
+ Topology.add_node_item(node[path[0]], value, path[1:])
@staticmethod
def add_new_port(node, ptype):
except KeyError:
return None
- def add_new_socket(self, node, socket_type, socket_id, socket_path):
+ @staticmethod
+ def add_new_socket(node, socket_type, socket_id, socket_path):
"""Add socket file of specific SocketType and ID to node.
:param node: Node to add socket on.
:param socket_type: Socket type.
- :param socket_id: Socket id.
+ :param socket_id: Socket id, currently equals to unique node key.
:param socket_path: Socket absolute path.
:type node: dict
:type socket_type: SocketType
:type socket_path: str
"""
path = [u"sockets", socket_type, socket_id]
- self.add_node_item(node, socket_path, path)
+ Topology.add_node_item(node, socket_path, path)
+
+ @staticmethod
+ def del_node_socket_id(node, socket_type, socket_id):
+ """Delete socket of specific SocketType and ID from node.
+
+ :param node: Node to delete socket from.
+ :param socket_type: Socket type.
+ :param socket_id: Socket id, currently equals to unique node key.
+ :type node: dict
+ :type socket_type: SocketType
+ :type socket_id: str
+ """
+ node[u"sockets"][socket_type].pop(socket_id)
@staticmethod
def get_node_sockets(node, socket_type=None):
| | ... | interface=${dut1_if1}
| | Vpp Route Add | ${dut2} | ${raddr_ip4} | 8 | gateway=${tg_if2_ip4}
| | ... | interface=${dut2_if2}
+
+| Initialize IPSec in 3-node circular container topology
+| | [Documentation]
+| | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular
+| | ... | topology. Get the interface MAC addresses and setup ARP on all VPP
+| | ... | interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG and
+| | ... | DUT1-DUT2 links. Set routing for encrypted traffic on both DUT nodes
+| | ... | with prefix /8 and next hop of neighbour DUT or TG interface IPv4
+| | ... | address.
+| |
+| | Set interfaces in path up on DUT | DUT1
+| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1}
+| | ... | ${dut1_if1_ip4} | 24
+| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | ${tg_if1_ip4} | ${tg_if1_mac}
+| | Vpp Route Add | ${dut1} | ${laddr_ip4} | 8 | gateway=${tg_if1_ip4}
+| | ... | interface=${dut1_if1}
| | ... | nodes=${nf_nodes}
| | ... | ELSE IF | '${container_chain_topology}' == 'chain_ipsec'
| | ... | ${group}.Configure VPP In All Containers | ${container_chain_topology}
+| | ... | tg_if1_ip4=${tg_if1_ip4} | tg_if1_mac=${tg_if1_mac}
| | ... | tg_if2_ip4=${tg_if2_ip4} | tg_if2_mac=${tg_if2_mac}
+| | ... | dut1_if1_ip4=${dut1_if1_ip4} | dut1_if2_ip4=${dut1_if2_ip4}
| | ... | dut2_if1_ip4=${dut2_if1_ip4} | dut2_if2_ip4=${dut2_if2_ip4}
-| | ... | raddr_ip4=${raddr_ip4} | nodes=${nodes} | nf_nodes=${nf_nodes}
+| | ... | raddr_ip4=${raddr_ip4} | laddr_ip4=${laddr_ip4}
+| | ... | nodes=${nodes} | nf_nodes=${nf_nodes}
| | ... | ELSE IF | '${container_chain_topology}' == 'pipeline_ip4'
| | ... | ${group}.Configure VPP In All Containers | ${container_chain_topology}
| | ... | tg_if1_mac=${tg_if1_mac} | tg_if2_mac=${tg_if2_mac}
| |
| | Run Keyword | ${group}.Destroy all containers
+| Verify VPP in all '${group}' containers
+| | [Documentation] | Verify that VPP is running inside containers in specific
+| | ... | container group on all DUT nodes. Does 120 retries with one second
+| | ... | between retries.
+| |
+| | Run Keyword | ${group}.Verify VPP in all containers
+
| Start containers for test
| | [Documentation]
| | ... | Start containers for test.
| | Start VPP in all '${container_group}' containers
| | Append To List | ${container_groups} | ${container_group}
| | Save VPP PIDs
+
+# TODO: Remove the vswitch startup.conf and read the host configuration instead.
+| Start vswitch in container on DUT
+| | [Documentation]
+| | ... | Configure and start vswitch in container.
+| |
+| | ... | *Arguments:*
+| | ... | - dut: DUT node on which to install vswitch. Type: string
+| | ... | - phy_cores - Number of physical cores to use. Type: integer
+| | ... | - rx_queues: Number of RX queues. Type: integer
+| |
+| | ... | *Example:*
+| |
+| | ... | \| Start vswitch in container on DUT \| DUT1 \| 1 \| 1 \|
+| |
+| | [Arguments] | ${dut} | ${phy_cores} | ${rx_queues}=${None}
+| |
+| | Set Test Variable | ${container_group} | VSWITCH
+| | Import Library | resources.libraries.python.ContainerUtils.ContainerManager
+| | ... | engine=${container_engine} | WITH NAME | VSWITCH
+| | Construct container on DUT | ${dut}
+| | ... | nf_chains=${1} | nf_nodes=${1} | nf_chain=${1}
+| | ... | nf_node=${1} | auto_scale=${False} | pinning=${False}
+| | Acquire all '${container_group}' containers
+| | Create all '${container_group}' containers
+| | ${cpu_count_int} | Convert to Integer | ${phy_cores}
+| | ${thr_count_int} | Convert to Integer | ${phy_cores}
+| | ${smt_used}= | Is SMT enabled | ${nodes['${dut}']['cpuinfo']}
+| | ${thr_count_int}= | Run keyword if | ${smt_used}
+| | ... | Evaluate | int(${cpu_count_int}*2)
+| | ... | ELSE | Set variable | ${thr_count_int}
+| | ${rxq_count_int}= | Run keyword if | ${rx_queues}
+| | ... | Set variable | ${rx_queues}
+| | ... | ELSE | Evaluate | int(${thr_count_int}/2)
+| | ${rxq_count_int}= | Run keyword if | ${rxq_count_int} == 0
+| | ... | Set variable | ${1}
+| | ... | ELSE | Set variable | ${rxq_count_int}
+| | VSWITCH.Configure VPP in all containers | chain_vswitch
+| | ... | rxq=${rxq_count_int} | n_instances=${n_instances}
+| | ... | buffers=${215040} | node=${dut}
+| | ... | dut1_if1=${dut1_if1} | dut1_if2=${dut1_if2}
+| | ... | dut2_if1=${dut2_if1} | dut2_if2=${dut2_if2}
+| | ... | dut2_if2_ip4=${dut2_if2_ip4}
+| | ... | tg_if1_ip4=${tg_if1_ip4} | tg_if1_mac=${tg_if1_mac}
+| | ... | tg_if2_ip4=${tg_if2_ip4} | tg_if2_mac=${tg_if2_mac}
+| | ... | nodes=${nodes}
+| | Start VPP in all '${container_group}' containers
+| | Verify VPP in all '${container_group}' containers
+
+| Start vswitch in container
+| | [Documentation]
+| | ... | Configure and start vswitch in container on all DUTs.
+| |
+| | ... | *Arguments:*
+| | ... | - phy_cores - Number of physical cores to use. Type: integer
+| | ... | - rx_queues: Number of RX queues. Type: integer
+| |
+| | ... | *Example:*
+| |
+| | ... | \| Start vswitch in container \| 1 \| 1 \|
+| |
+| | [Arguments] | ${phy_cores} | ${rx_queues}=${None}
+| |
+| | FOR | ${dut} | IN | @{duts}
+| | | Run Keyword | Start vswitch in container on DUT
+| | | ... | ${dut} | ${phy_cores} | ${rx_queues}
+| | END
+| | Append To List | ${container_groups} | ${container_group}
+| | Save VPP PIDs
| | FOR | ${dut} | IN | @{duts}
| | | Import Library | resources.libraries.python.VppConfigGenerator
| | | ... | WITH NAME | ${dut}
-| | | Run keyword | ${dut}.Set Node | ${nodes['${dut}']}
+| | | Run keyword | ${dut}.Set Node | ${nodes['${dut}']} | node_key=${dut}
| | | Run keyword | ${dut}.Add Unix Log
| | | Run keyword | ${dut}.Add Unix CLI Listen
| | | Run keyword | ${dut}.Add Unix Nodaemon
| |
| | FOR | ${dut} | IN | @{duts}
| | | Run keyword | ${dut}.Apply Config
-| | | Add New Socket | ${nodes['${dut}']} | PAPI | ${dut} | ${SOCKSVR_PATH}
-| | | Add New Socket | ${nodes['${dut}']} | STATS | ${dut} | ${SOCKSTAT_PATH}
| | END
| | Save VPP PIDs
| | Enable Coredump Limit VPP on All DUTs | ${nodes}
| | Update All Interface Data On All Nodes | ${nodes} | skip_tg=${True}
| | Run keyword If | ${with_trace} | VPP Enable Traces On All Duts | ${nodes}
+| Apply startup configuration on VPP DUT
+| | [Documentation] | Write VPP startup configuration and restart VPP DUT.
+| |
+| | ... | *Arguments:*
+| | ... | - dut - DUT on which to apply the configuration. Type: string
+| | ... | - with_trace - Enable packet trace after VPP restart Type: boolean
+| |
+| | [Arguments] | ${dut} | ${with_trace}=${False}
+| |
+| | Run keyword | ${dut}.Apply Config
+| | Save VPP PIDs on DUT | ${dut}
+| | Enable Coredump Limit VPP on DUT | ${nodes['${dut}']}
+| | ${dutnode}= | Copy Dictionary | ${nodes}
+| | Keep In Dictionary | ${dutnode} | ${dut}
+| | Update All Interface Data On All Nodes | ${dutnode} | skip_tg=${True}
+| | Run keyword If | ${with_trace} | VPP Enable Traces On Dut
+| | ... | ${nodes['${dut}']}
+
| Save VPP PIDs
| | [Documentation] | Get PIDs of VPP processes from all DUTs in topology and\
| | ... | set it as a test variable. The PIDs are stored as dictionary items\
| | END
| | Set Test Variable | ${setup_vpp_pids}
+| Save VPP PIDs on DUT
+| | [Documentation] | Get PID of VPP processes from DUT and\
+| | ... | set it as a test variable. The PID is stored as dictionary item\
+| | ... | where the key is the host and the value is the PID.
+| |
+| | [Arguments] | ${dut}
+| |
+| | ${vpp_pids}= | Get VPP PID | ${nodes['${dut}']}
+| | Run Keyword If | ${vpp_pids} is None | FAIL
+| | ... | No VPP PID found on node ${nodes['${dut}']['host']
+| | ${status} | ${message}= | Run Keyword And Ignore Error
+| | ... | Variable Should Exist | ${setup_vpp_pids}
+| | ${setup_vpp_pids}= | Run Keyword If | '${status}' == 'FAIL'
+| | ... | Create Dictionary | ${nodes['${dut}']['host']}=${vpp_pids}
+| | ... | ELSE | Set To Dictionary | ${setup_vpp_pids}
+| | ... | ${nodes['${dut}']['host']}=${vpp_pids}
+| | Set Test Variable | ${setup_vpp_pids}
+
| Verify VPP PID in Teardown
| | [Documentation] | Check if the VPP PIDs on all DUTs are the same at the end\
| | ... | of test as they were at the begining. If they are not, only a message\
| | ... | *Set UP state on VPP interfaces in path on all DUT nodes and set
| | ... | maximal MTU.*
| |
+| | FOR | ${dut} | IN | @{duts}
+| | | Set interfaces in path up on DUT | ${dut}
+| | END
+| | All VPP Interfaces Ready Wait | ${nodes} | retries=${300}
+
+| Set interfaces in path up on DUT
+| | [Documentation]
+| | ... | *Set UP state on VPP interfaces in path on specified DUT node and
+| | ... | set maximal MTU.*
+| |
+| | ... | *Arguments:*
+| | ... | - dut - DUT node on which to set the interfaces up.
+| | ... | Type: string
+| |
+| | ... | *Example:*
+| |
+| | ... | \| Set interfaces in path up on DUT \| DUT1 \|
+| |
+| | [Arguments] | ${dut}
# TODO: Rework KW to set all interfaces in path UP and set MTU (including
# software interfaces. Run KW at the start phase of VPP setup to split
# from other "functional" configuration. This will allow modularity of this
# library
-| | FOR | ${dut} | IN | @{duts}
-| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error
-| | | ... | Variable Should Exist | ${${dut}_if1}
-| | | Run Keyword If | '${if1_status}' == 'PASS'
-| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1} | up
-| | | ... | ELSE
-| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_1} | up
-| | | Run Keyword Unless | '${if1_status}' == 'PASS'
-| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_2} | up
-| | | ${if2_status} | ${value}= | Run Keyword And Ignore Error
-| | | ... | Variable Should Exist | ${${dut}_if2}
-| | | Run Keyword If | '${if2_status}' == 'PASS'
-| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2} | up
-| | | ... | ELSE
-| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2_1} | up
-| | | Run Keyword Unless | '${if2_status}' == 'PASS'
-| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2_2} | up
-| | END
-| | FOR | ${dut} | IN | @{duts}
-| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error
-| | | ... | Variable Should Exist | ${${dut}_if1}
-| | | Run Keyword If | '${if1_status}' == 'PASS'
-| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1}
-| | | ... | ELSE
-| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_1}
-| | | Run Keyword Unless | '${if1_status}' == 'PASS'
-| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_2}
-| | | ${if2_status} | ${value}= | Run Keyword And Ignore Error
-| | | ... | Variable Should Exist | ${${dut}_if2}
-| | | Run Keyword If | '${if2_status}' == 'PASS'
-| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2}
-| | | ... | ELSE
-| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2_1}
-| | | Run Keyword Unless | '${if2_status}' == 'PASS'
-| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2_2}
-| | END
-| | All VPP Interfaces Ready Wait | ${nodes} | retries=${300}
+| | ${if1_status} | ${value}= | Run Keyword And Ignore Error
+| | ... | Variable Should Exist | ${${dut}_if1}
+| | Run Keyword If | '${if1_status}' == 'PASS'
+| | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1} | up
+| | ... | ELSE
+| | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_1} | up
+| | Run Keyword Unless | '${if1_status}' == 'PASS'
+| | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_2} | up
+| | ${if2_status} | ${value}= | Run Keyword And Ignore Error
+| | ... | Variable Should Exist | ${${dut}_if2}
+| | Run Keyword If | '${if2_status}' == 'PASS'
+| | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2} | up
+| | ... | ELSE
+| | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2_1} | up
+| | Run Keyword Unless | '${if2_status}' == 'PASS'
+| | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2_2} | up
+| | ${if1_status} | ${value}= | Run Keyword And Ignore Error
+| | ... | Variable Should Exist | ${${dut}_if1}
+| | Run Keyword If | '${if1_status}' == 'PASS'
+| | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1}
+| | ... | ELSE
+| | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_1}
+| | Run Keyword Unless | '${if1_status}' == 'PASS'
+| | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_2}
+| | ${if2_status} | ${value}= | Run Keyword And Ignore Error
+| | ... | Variable Should Exist | ${${dut}_if2}
+| | Run Keyword If | '${if2_status}' == 'PASS'
+| | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2}
+| | ... | ELSE
+| | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2_1}
+| | Run Keyword Unless | '${if2_status}' == 'PASS'
+| | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2_2}
| Set single interfaces in path up
| | [Documentation]
| |
| | Remove All Added Ports On All DUTs From Topology | ${nodes}
| | Show PAPI History On All DUTs | ${nodes}
-| | Show Log On All DUTs | ${nodes}
| | Run Keyword If Test Failed
| | ... | Get Core Files on All Nodes | ${nodes}
| | Run Keyword If Test Failed
--- /dev/null
+create memif socket id 1 filename $socket1
+create interface memif id $mid1 socket-id $sid1 hw-addr $mac1 slave
+set interface ip address memif$sid1/$mid1 $tnl_local_ip/24
+set interface state memif$sid1/$mid1 up
+
+create memif socket id 2 filename $socket2
+create interface memif id $mid2 socket-id $sid2 hw-addr $mac2 slave
+set interface ip address memif$sid2/$mid2 $remote_ip/24
+set interface state memif$sid2/$mid2 up
+
+set ip arp memif$sid2/$mid2 $tg_if2_ip4 $tg_if2_mac static
+set ip arp memif$sid1/$mid1 $tnl_remote_ip $tnl_remote_mac static
+ip route add $raddr_ip4/8 via $tg_if2_ip4 memif$sid2/$mid2
--- /dev/null
+create memif socket id 1 filename $socket1
+create memif socket id 2 filename $socket2
+
+create bridge-domain 1 learn 1 forward 1 uu-flood 1 flood 1 arp-term 0
+create bridge-domain 2 learn 1 forward 1 uu-flood 1 flood 1 arp-term 0
+
+set interface l2 bridge $if_red_name 1
+set interface l2 bridge $if_black_name 2
+set interface state $if_red_name up
+set interface state $if_black_name up
+
+$instances
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.3.231
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.3.231
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:00'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:00"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:00"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.3.231'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.3.231"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.3.231'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.3.231"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=0,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=0,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.3.231
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.3.231
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:01'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:01"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:01"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.3.231'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.3.231"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.3.231'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.3.231"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=1,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=1,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.3.231
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.3.231
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:03'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:03"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:03"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.3.231'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.3.231"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.3.231'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.3.231"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=3,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=3,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.3.231
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.3.231
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:07'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:07"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:07"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.3.231'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.3.231"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.3.231'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.3.231"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=7,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=7,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.39.15
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.39.15
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:00'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:00"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:00"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.39.15'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.39.15"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.39.15'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.39.15"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=0,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=0,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.39.15
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.39.15
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:01'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:01"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:01"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.39.15'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.39.15"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.39.15'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.39.15"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=1,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=1,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.39.15
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.39.15
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:03'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:03"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:03"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.39.15'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.39.15"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.39.15'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.39.15"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=3,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=3,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.39.15
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.39.15
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:07'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:07"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:07"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.39.15'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.39.15"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.39.15'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.39.15"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=7,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=7,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.78.31
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.78.31
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:00'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:00"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:00"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.78.31'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.78.31"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.78.31'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.78.31"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=0,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=0,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.78.31
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.78.31
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:01'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:01"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:01"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.78.31'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.78.31"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.78.31'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.78.31"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=1,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=1,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.78.31
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.78.31
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:03'
+ self.p1_dst_start_mac = "02:02:00:00:12:00"
+ self.p1_dst_end_mac = "02:02:00:00:12:03"
+
+ self.p2_dst_start_mac = "02:02:00:00:02:00"
+ self.p2_dst_end_mac = "02:02:00:00:02:03"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.78.31'
+ self.p1_src_start_ip = "10.0.0.1"
+ self.p1_dst_start_ip = "20.0.0.0"
+ self.p1_dst_end_ip = "20.0.78.31"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.78.31'
+ self.p2_src_start_ip = "20.0.0.1"
+ self.p2_dst_start_ip = "10.0.0.0"
+ self.p2_dst_end_ip = "10.0.78.31"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=3,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=3,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.78.31
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.78.31
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:07'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:07"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:07"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.78.31'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.78.31"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.78.31'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.78.31"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=7,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=7,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.0.3
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.0.3
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:00'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:00"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:00"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.0.3'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.0.3"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.0.3'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.0.3"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=0,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=0,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.0.3
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.0.3
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:01'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:01"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:01"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.0.3'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.0.3"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.0.3'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.0.3"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=1,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
STLVmFixIpv4(offset="IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=1,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.0.3
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.0.3
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:03'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:03"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:03"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.0.3'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.0.3"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.0.3'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.0.3"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=3,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=3,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.0.39
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.0.39
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:00'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:00"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:00"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.0.39'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.0.39"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.0.39'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.0.39"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=0,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=0,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.0.39
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.0.39
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:01'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:01"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:01"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.0.39'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.0.39"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.0.39'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.0.39"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=1,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
STLVmFixIpv4(offset="IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=1,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.0.39
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.0.39
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:03'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:03"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:03"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.0.39'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.0.39"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.0.39'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.0.39"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=3,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=3,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.0.39
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.0.39
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:07'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:07"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:07"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.0.39'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.0.39"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.0.39'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.0.39"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=7,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=7,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:00'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:00"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:00"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.1.143'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.1.143"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.1.143'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.1.143"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=0,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=0,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:01'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:01"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:01"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.1.143'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.1.143"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.1.143'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.1.143"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=1,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=1,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:03'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:03"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:03"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.1.143'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.1.143"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.1.143'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.1.143"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=3,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=3,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:07'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:07"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:07"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.1.143'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.1.143"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.1.143'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.1.143"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=7,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=7,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.156.63
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.156.63
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:00'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:00"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:00"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.156.63'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.156.63"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.156.63'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.156.63"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=0,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=0,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.156.63
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.156.63
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:01'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:01"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:01"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.156.63'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.156.63"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.156.63'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.156.63"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=1,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=1,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.156.63
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.156.63
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:03'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:03"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:03"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.156.63'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.156.63"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.156.63'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.156.63"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=3,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=3,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.156.63
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.156.63
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:07'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:07"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:07"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.156.63'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.156.63"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.156.63'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.156.63"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=7,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=7,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.19.135
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.19.135
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:00'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:00"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:00"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.19.135'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.19.135"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.19.135'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.19.135"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=0,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=0,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.19.135
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.19.135
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:01'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:01"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:01"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.19.135'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.19.135"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.19.135'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.19.135"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=1,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=1,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.19.135
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.19.135
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:03'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:03"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:03"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.19.135'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.19.135"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.19.135'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.19.135"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=3,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=3,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.19.135
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.19.135
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:07'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:07"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:07"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.19.135'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.19.135"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.19.135'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.19.135"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=7,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=7,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.234.95
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.234.95
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:00'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:00"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:00"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.234.95'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.234.95"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.234.95'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.234.95"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=0,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=0,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.234.95
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.234.95
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:01'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:01"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:01"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.234.95'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.234.95"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.234.95'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.234.95"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=1,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=1,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.234.95
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.234.95
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:03'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:03"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:03"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.234.95'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.234.95"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.234.95'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.234.95"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=3,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=3,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
- Packet: ETH / IP /
- Direction 0 --> 1:
- Source IP address range: 10.0.0.1
- - Destination IP address range: 20.0.0.0 - 20.0.234.95
+ - Destination IP address range: 20.0.0.0 - 20.0.1.143
- Direction 1 --> 0:
- Source IP address range: 20.0.0.1
- - Destination IP address range: 10.0.0.0 - 10.0.234.95
+ - Destination IP address range: 10.0.0.0 - 10.0.1.143
"""
from trex.stl.api import *
super(TrafficStreamsBaseClass, self).__init__()
- self.p2_dst_start_mac = '02:02:00:00:00:00'
- self.p2_dst_end_mac = '02:02:00:00:00:07'
+ self.p1_dst_start_mac = u"02:02:00:00:12:00"
+ self.p1_dst_end_mac = u"02:02:00:00:12:07"
+
+ self.p2_dst_start_mac = u"02:02:00:00:02:00"
+ self.p2_dst_end_mac = u"02:02:00:00:02:07"
# IPs used in packet headers.
- self.p1_src_start_ip = '10.0.0.1'
- self.p1_dst_start_ip = '20.0.0.0'
- self.p1_dst_end_ip = '20.0.234.95'
+ self.p1_src_start_ip = u"10.0.0.1"
+ self.p1_dst_start_ip = u"20.0.0.0"
+ self.p1_dst_end_ip = u"20.0.234.95"
- self.p2_src_start_ip = '20.0.0.1'
- self.p2_dst_start_ip = '10.0.0.0'
- self.p2_dst_end_ip = '10.0.234.95'
+ self.p2_src_start_ip = u"20.0.0.1"
+ self.p2_dst_start_ip = u"10.0.0.0"
+ self.p2_dst_end_ip = u"10.0.234.95"
def define_packets(self):
"""Defines the packets to be sent from the traffic generator.
"""
# Direction 0 --> 1
- base_pkt_a = (Ether() /
+ base_pkt_a = (Ether(dst=self.p1_dst_start_mac) /
IP(src=self.p1_src_start_ip,
dst=self.p1_dst_start_ip,
proto=61))
proto=61))
# Direction 0 --> 1
- vm1 = STLScVmRaw([STLVmFlowVar(name="dst",
+ vm1 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
+ min_value=0,
+ max_value=7,
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p1_dst_start_ip,
max_value=self.p1_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
# Direction 1 --> 0
- vm2 = STLScVmRaw([STLVmFlowVar(name="mac_dst",
+ vm2 = STLScVmRaw([STLVmFlowVar(name=u"mac_dst",
min_value=0,
max_value=7,
- size=1, op="inc"),
- STLVmWrFlowVar(fv_name="mac_dst", pkt_offset=5),
- STLVmFlowVar(name="dst",
+ size=1, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"mac_dst", pkt_offset=5),
+ STLVmFlowVar(name=u"dst",
min_value=self.p2_dst_start_ip,
max_value=self.p2_dst_end_ip,
- size=4, op="inc"),
- STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"),
- STLVmFixIpv4(offset="IP")])
+ size=4, op=u"inc"),
+ STLVmWrFlowVar(fv_name=u"dst", pkt_offset=u"IP.dst"),
+ STLVmFixIpv4(offset=u"IP")])
return base_pkt_a, base_pkt_b, vm1, vm2
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 8DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 8 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${8}
+| ${n_tunnels}= | ${10000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 1DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 1 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${1}
+| ${n_tunnels}= | ${10000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 2DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 2 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${2}
+| ${n_tunnels}= | ${10000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 4DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 4 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${4}
+| ${n_tunnels}= | ${10000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 8DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 8 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${8}
+| ${n_tunnels}= | ${1000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 1DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 1 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${1}
+| ${n_tunnels}= | ${1000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 2DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 2 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${2}
+| ${n_tunnels}= | ${1000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 4DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 4 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${4}
+| ${n_tunnels}= | ${1000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_20000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 8DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 8 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${8}
+| ${n_tunnels}= | ${20000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_20000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 1DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 1 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${1}
+| ${n_tunnels}= | ${20000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_20000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 2DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 2 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${2}
+| ${n_tunnels}= | ${20000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_20000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 4DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 4 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${4}
+| ${n_tunnels}= | ${20000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 8DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 8 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${8}
+| ${n_tunnels}= | ${40000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 1DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 1 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${1}
+| ${n_tunnels}= | ${40000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 2DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 2 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${2}
+| ${n_tunnels}= | ${40000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 4DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 4 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${4}
+| ${n_tunnels}= | ${40000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_400
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 8DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 8 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${8}
+| ${n_tunnels}= | ${400}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_400
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 1DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 1 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${1}
+| ${n_tunnels}= | ${400}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_400
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 2DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 2 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${2}
+| ${n_tunnels}= | ${400}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_400
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 4DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 4 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${4}
+| ${n_tunnels}= | ${400}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 8DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 8 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${8}
+| ${n_tunnels}= | ${40}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 1DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 1 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${1}
+| ${n_tunnels}= | ${40}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 2DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 2 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${2}
+| ${n_tunnels}= | ${40}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 4DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 4 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${4}
+| ${n_tunnels}= | ${40}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 1DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 1 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${1}
+| ${n_tunnels}= | ${4}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 2DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 2 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${2}
+| ${n_tunnels}= | ${4}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 4DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 4 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${4}
+| ${n_tunnels}= | ${4}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 8DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 8 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${8}
+| ${n_tunnels}= | ${5000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 1DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 1 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${1}
+| ${n_tunnels}= | ${5000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 2DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 2 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${2}
+| ${n_tunnels}= | ${5000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 4DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 4 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${4}
+| ${n_tunnels}= | ${5000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_60000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 8DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 8 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${8}
+| ${n_tunnels}= | ${60000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_60000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 1DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 1 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${1}
+| ${n_tunnels}= | ${60000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_60000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 2DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 2 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${2}
+| ${n_tunnels}= | ${60000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_60000
+| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 4DCR
+| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
+|
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance | container
+|
+| Test Template | Local Template
+|
+| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
+| ... | 4 docker container*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.254
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 100.0.0.254
+| ${dut2_if1_ip4}= | 200.0.0.1
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.254
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${24}
+| ${n_instances}= | ${4}
+| ${n_tunnels}= | ${60000}
+| ${nf_dtcr}= | ${1}
+| ${nf_dtc}= | ${1}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_ipsec
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
+| | ... | containers.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 256
+| | ${auth_alg}= | Set Variable | ${None}
+| | ${ipsec_proto} = | IPsec Proto ESP
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize IPSec in 3-node circular topology
+| | And Stop VPP service on all DUTs | ${nodes}
+| | And VPP IPsec Create Tunnel Interfaces in Containers
+| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
+| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
+| | And Start containers for test
+| | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
+| | ... | pinning=${False}
+| | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4drc1c-vppip4-aes256gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
--- /dev/null
+#!/usr/bin/env python
+
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+from resources.libraries.python.autogen.Regenerator import Regenerator
+
+Regenerator().regenerate_glob(u"*.robot")
Code Review / csit.git / commitdiff