Report: remove greps

Change-Id: I57fee701a99bcdb4f523011fa774c42ecdacdde4
Signed-off-by: Tibor Frank <tifrank@cisco.com>

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst
index cac2916..e604605 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst
@@ -25,20 +25,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo
 *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
 *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet
 Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/container_memif
-      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/container_memif?h=rls1804>`_.

 
 VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
 
 
 VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
 


@@ -58,17 +46,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo
 *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
 *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet
 Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/container_memif
-      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/container_memif?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst
index 83181bf..60e80ce 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst
@@ -25,20 +25,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo
 *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
 *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet
 Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/kubernetes/perf/container_memif
-      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/kubernetes/perf/container_memif?h=rls1804>`_.

 
 VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
 
 
 VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
 


@@ -58,17 +46,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo
 *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
 *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet
 Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/kubernetes/perf/container_memif
-      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/kubernetes/perf/container_memif?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ip4.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ip4.rst
index d2ffc89..7ea8af4 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/ip4.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ip4.rst
@@ -24,20 +24,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo
 
 *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPv4 Routed-Forwarding.*
 
 
 *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPv4 Routed-Forwarding.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip4
-      $ grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4?h=rls1804>`_.

 
 VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
 
 
 VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
 


@@ -56,17 +44,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo
 
 *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPv4 Routed-Forwarding.*
 
 
 *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPv4 Routed-Forwarding.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip4
-      $ grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ip4_tunnels.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ip4_tunnels.rst
index ad818ff..c148251 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/ip4_tunnels.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ip4_tunnels.rst
@@ -24,20 +24,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo
 
 *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPv4 Overlay Tunnels.*
 
 
 *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPv4 Overlay Tunnels.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip4_tunnels
-      $ grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4_tunnels?h=rls1804>`_.

 
 VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
 
 
 VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
 


@@ -56,17 +44,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo
 
 *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPv4 Overlay Tunnels.*
 
 
 *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPv4 Overlay Tunnels.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip4_tunnels
-      $ grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4_tunnels?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ip6.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ip6.rst
index c2e5102..622813d 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/ip6.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ip6.rst
@@ -24,20 +24,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo
 
 *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPv6 Routed-Forwarding.*
 
 
 *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPv6 Routed-Forwarding.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip6
-      $ grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6?h=rls1804>`_.

 
 VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
 
 
 VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
 


@@ -56,17 +44,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo
 
 *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPv6 Routed-Forwarding.*
 
 
 *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPv6 Routed-Forwarding.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip6
-      $ grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ip6_tunnels.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ip6_tunnels.rst
index 4f8809b..12d21f6 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/ip6_tunnels.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ip6_tunnels.rst
@@ -24,20 +24,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo
 
 *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPv6 Overlay Tunnels.*
 
 
 *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPv6 Overlay Tunnels.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip6_tunnels
-      $ grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6_tunnels?h=rls1804>`_.

 
 VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
 
 
 VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
 


@@ -56,18 +44,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo
 
 *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPv6 Overlay Tunnels.*
 
 
 *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPv6 Overlay Tunnels.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-2t2c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip6_tunnels
-      $ grep -E "78B-2t2c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
-
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6_tunnels?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ipsec.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ipsec.rst
index 952ec51..0c8f3de 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/ipsec.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ipsec.rst
@@ -28,20 +28,8 @@ below.
 
 *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPSec HW with IPv4 Routed-Forwarding.*
 
 
 *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPSec HW with IPv4 Routed-Forwarding.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/crypto
-      $ grep -E "64B-1t1c-.*ipsec.*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls1804>`_.

 
 VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
 
 
 VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
 


@@ -60,17 +48,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo
 
 *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPSec HW with IPv4 Routed-Forwarding.*
 
 
 *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPSec HW with IPv4 Routed-Forwarding.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/crypto
-      $ grep -E "64B-2t2c-.*ipsec.*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/l2.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/l2.rst
index 7842fc8..a430d55 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/l2.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/l2.rst
@@ -25,19 +25,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo
 *Figure 1a. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
 *Figure 1a. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet
 Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.

 
 .. raw:: html
 
 
 .. raw:: html
 


@@ -55,20 +44,8 @@ git repository:
 *Figure 1b. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet
 Switching (feature).*
 
 *Figure 1b. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet
 Switching (feature).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/l2
-      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.

 
 VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
 
 
 VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
 


@@ -88,19 +65,8 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo
 *Figure 2a. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
 *Figure 2a. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet
 Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.

 
 .. raw:: html
 
 
 .. raw:: html
 


@@ -118,17 +84,5 @@ git repository:
 *Figure 2b. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet
 Switching (feature).*
 
 *Figure 2b. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet
 Switching (feature).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/l2
-      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/srv6.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/srv6.rst
index bb45c4b..163d892 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/srv6.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/srv6.rst
@@ -24,20 +24,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo
 
 *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy SRv6.*
 
 
 *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy SRv6.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E "78B-1t1c-ethip6.*srv6.*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/srv6
-      $ grep -E "78B-1t1c-ethip6.*srv6.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/srv6?h=rls1804>`_.

 
 VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
 
 
 VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
 


@@ -56,17 +44,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo
 
 *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy SRv6.*
 
 
 *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy SRv6.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E "78B-2t2c-ethip6.*srv6.*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/srv6
-      $ grep -E "78B-2t2c-ethip6.*srv6.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/srv6?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/vm_vhost.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/vm_vhost.rst
index 4a9aa6c..5eb8a57 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/vm_vhost.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/vm_vhost.rst
@@ -26,6 +26,9 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo
 *Figure 1a. VPP 1thread 1core - packet latency for Phy-to-VM-to-Phy VM
 vhost-user selected TCs (ipv4).*
 
 *Figure 1a. VPP 1thread 1core - packet latency for Phy-to-VM-to-Phy VM
 vhost-user selected TCs (ipv4).*
 

+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
+

 .. raw:: html
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-vhost-sel2-ndrdisc-lat50.html"></iframe>
 .. raw:: html
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-vhost-sel2-ndrdisc-lat50.html"></iframe>


@@ -42,20 +45,8 @@ vhost-user selected TCs (ipv4).*
 *Figure 1b. VPP 1thread 1core - packet latency for Phy-to-VM-to-Phy VM
 vhost-user selected TCs (l2).*
 
 *Figure 1b. VPP 1thread 1core - packet latency for Phy-to-VM-to-Phy VM
 vhost-user selected TCs (l2).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-1t1c-.*vhost.*-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/vm_vhost
-      $ grep -E "64B-1t1c-.*vhost.*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.

 
 VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
 
 
 VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
 


@@ -75,6 +66,9 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo
 *Figure 2a. VPP 2threads 2cores - packet latency for Phy-to-VM-to-Phy VM
 vhost-user selected TCs (ipv4).*
 
 *Figure 2a. VPP 2threads 2cores - packet latency for Phy-to-VM-to-Phy VM
 vhost-user selected TCs (ipv4).*
 

+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
+

 .. raw:: html
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-vhost-sel2-ndrdisc-lat50.html"></iframe>
 .. raw:: html
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-vhost-sel2-ndrdisc-lat50.html"></iframe>


@@ -91,17 +85,5 @@ vhost-user selected TCs (ipv4).*
 *Figure 2b. VPP 2threads 2cores - packet latency for Phy-to-VM-to-Phy VM
 vhost-user selected TCs (l2).*
 
 *Figure 2b. VPP 2threads 2cores - packet latency for Phy-to-VM-to-Phy VM
 vhost-user selected TCs (l2).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-2t2c-.*vhost.*-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/vm_vhost
-      $ grep -E "64B-2t2c-.*vhost.*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/container_memif.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/container_memif.rst
index e50e735..3aa67ad 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/container_memif.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/container_memif.rst
@@ -29,20 +29,8 @@ in the graph below.
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/container_memif
-      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/container_memif?h=rls1804>`_.

 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.


@@ -63,20 +51,8 @@ in the graph below.
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/container_memif
-      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/container_memif?h=rls1804>`_.

 
 
 PDR Throughput
 
 
 PDR Throughput


@@ -101,20 +77,8 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/container_memif
-      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/container_memif?h=rls1804>`_.

 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.


@@ -135,17 +99,5 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/container_memif
-      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/container_memif?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/container_orchestrated.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/container_orchestrated.rst
index adf87d0..5fd535d 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/container_orchestrated.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/container_orchestrated.rst
@@ -29,20 +29,8 @@ in the graph below.
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/kubernetes/perf/container_memif
-      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/kubernetes/perf/container_memif?h=rls1804>`_.

 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.


@@ -63,20 +51,8 @@ in the graph below.
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/kubernetes/perf/container_memif
-      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/kubernetes/perf/container_memif?h=rls1804>`_.

 
 
 PDR Throughput
 
 
 PDR Throughput


@@ -101,23 +77,8 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/kubernetes/perf/container_memif
-      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
-
-VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
-in the graph below. PDR measured for 0.5% packet loss ratio.
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/kubernetes/perf/container_memif?h=rls1804>`_.

 
 .. raw:: html
 
 
 .. raw:: html
 


@@ -135,17 +96,5 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/kubernetes/perf/container_memif
-      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/kubernetes/perf/container_memif?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst
index 23d7f6c..7d2e707 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst
@@ -28,20 +28,8 @@ in the graph below.
 
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.*
 
 
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip4
-      $ grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4?h=rls1804>`_.

 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.


@@ -62,20 +50,8 @@ in the graph below.
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv4
 Routed-Forwarding.*
 
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv4
 Routed-Forwarding.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip4
-      $ grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4?h=rls1804>`_.

 
 PDR Throughput
 ~~~~~~~~~~~~~~
 
 PDR Throughput
 ~~~~~~~~~~~~~~


@@ -99,20 +75,8 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv4
 Routed-Forwarding.*
 
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv4
 Routed-Forwarding.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip4
-      $ grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4?h=rls1804>`_.

 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.


@@ -133,17 +97,5 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv4
 Routed-Forwarding.*
 
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv4
 Routed-Forwarding.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip4
-      $ grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst
index 98f3bc6..7b75f7e 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst
@@ -29,20 +29,8 @@ in the graph below.
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv4 Overlay
 Tunnels.*
 
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv4 Overlay
 Tunnels.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip4_tunnels
-      $ grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4_tunnels?h=rls1804>`_.

 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.


@@ -62,20 +50,8 @@ in the graph below.
 
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.*
 
 
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip4_tunnels
-      $ grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4_tunnels?h=rls1804>`_.

 
 PDR Throughput
 ~~~~~~~~~~~~~~
 
 PDR Throughput
 ~~~~~~~~~~~~~~


@@ -99,20 +75,8 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv4 Overlay
 Tunnels.*
 
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv4 Overlay
 Tunnels.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip4_tunnels
-      $ grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4_tunnels?h=rls1804>`_.

 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.


@@ -132,17 +96,5 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.*
 
 
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip4_tunnels
-      $ grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4_tunnels?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst
index ec99408..982752a 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst
@@ -29,20 +29,8 @@ in the graph below.
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv6
 Routed-Forwarding.*
 
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv6
 Routed-Forwarding.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip6
-      $ grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6?h=rls1804>`_.

 
 VPP NDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
 
 VPP NDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.


@@ -63,20 +51,8 @@ in the graph below.
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv6
 Routed-Forwarding.*
 
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv6
 Routed-Forwarding.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip6
-      $ grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6?h=rls1804>`_.

 
 PDR Throughput
 ~~~~~~~~~~~~~~
 
 PDR Throughput
 ~~~~~~~~~~~~~~


@@ -100,23 +76,8 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv6
 Routed-Forwarding.*
 
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv6
 Routed-Forwarding.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip6
-      $ grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
-
-VPP PDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
-in the graph below. PDR measured for 0.5% packet loss ratio.
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6?h=rls1804>`_.

 
 .. raw:: html
 
 
 .. raw:: html
 


@@ -134,17 +95,5 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv6
 Routed-Forwarding.*
 
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv6
 Routed-Forwarding.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip6
-      $ grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6_tunnels.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6_tunnels.rst
index c329715..8191ec4 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6_tunnels.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6_tunnels.rst
@@ -29,20 +29,8 @@ in the graph below.
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv6 Overlay
 Tunnels.*
 
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv6 Overlay
 Tunnels.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip6_tunnels
-      $ grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6_tunnels?h=rls1804>`_.

 
 VPP NDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
 
 VPP NDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.


@@ -63,20 +51,8 @@ in the graph below.
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv6 Overlay
 Tunnels.*
 
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv6 Overlay
 Tunnels.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip6_tunnels
-      $ grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6_tunnels?h=rls1804>`_.

 
 PDR Throughput
 ~~~~~~~~~~~~~~
 
 PDR Throughput
 ~~~~~~~~~~~~~~


@@ -100,20 +76,8 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv6 Overlay
 Tunnels.*
 
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv6 Overlay
 Tunnels.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip6_tunnels
-      $ grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6_tunnels?h=rls1804>`_.

 
 VPP PDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
 
 VPP PDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.


@@ -134,17 +98,5 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv6 Overlay
 Tunnels.*
 
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv6 Overlay
 Tunnels.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-2t2c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip6_tunnels
-      $ grep -E "78B-2t2c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6_tunnels?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst
index b0fd17d..723e1f2 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst
@@ -31,20 +31,8 @@ in the graph below.
 
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPSEC HW.*
 
 
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPSEC HW.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/crypto
-      $ grep -E "64B-1t1c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls1804>`_.

 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.


@@ -64,20 +52,8 @@ in the graph below.
 
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPSEC HW.*
 
 
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPSEC HW.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/crypto
-      $ grep -E "64B-2t2c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls1804>`_.

 
 PDR Throughput
 ~~~~~~~~~~~~~~
 
 PDR Throughput
 ~~~~~~~~~~~~~~


@@ -100,20 +76,8 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPSEC HW.*
 
 
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPSEC HW.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/crypto
-      $ grep -E "64B-1t1c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls1804>`_.

 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.


@@ -133,17 +97,5 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPSEC HW.*
 
 
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPSEC HW.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/crypto
-      $ grep -E "64B-2t2c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst
index 6966413..701e3b2 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst
@@ -29,19 +29,8 @@ in the graph below.
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.

 
 
 .. raw:: html
 
 
 .. raw:: html


@@ -60,20 +49,8 @@ git repository:
 *Figure 2. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (feature).*
 
 *Figure 2. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (feature).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/l2
-      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.

 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.


@@ -94,20 +71,8 @@ in the graph below.
 *Figure 3. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
 *Figure 3. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
-
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.

 
 .. raw:: html
 
 
 .. raw:: html
 


@@ -125,20 +90,8 @@ git repository:
 *Figure 4. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (feature).*
 
 *Figure 4. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (feature).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/l2
-      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.

 
 
 PDR Throughput
 
 
 PDR Throughput


@@ -163,20 +116,8 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 *Figure 5. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
 *Figure 5. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
-
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.

 
 .. raw:: html
 
 
 .. raw:: html
 


@@ -194,20 +135,8 @@ git repository:
 *Figure 6. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (feature).*
 
 *Figure 6. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (feature).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/l2
-      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.

 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.


@@ -228,20 +157,8 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 *Figure 7. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
 *Figure 7. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
-
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.

 
 .. raw:: html
 
 
 .. raw:: html
 


@@ -259,14 +176,5 @@ git repository:
 *Figure 8. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (feature).*
 
 *Figure 8. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (feature).*
 

-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/l2
-      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/srv6.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/srv6.rst
index 5df30d2..0df40ac 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/srv6.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/srv6.rst
@@ -28,20 +28,8 @@ in the graph below.
 
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy SRv6.*
 
 
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy SRv6.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E "78B-1t1c-ethip6.*srv6.*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/srv6
-      $ grep -E "78B-1t1c-ethip6.*srv6.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/srv6?h=rls1804>`_.

 
 VPP NDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
 
 VPP NDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.


@@ -61,20 +49,8 @@ in the graph below.
 
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy SRv6.*
 
 
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy SRv6.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E "78B-2t2c-ethip6.*srv6.*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/srv6
-      $ grep -E "78B-2t2c-ethip6.*srv6.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/srv6?h=rls1804>`_.

 
 PDR Throughput
 ~~~~~~~~~~~~~~
 
 PDR Throughput
 ~~~~~~~~~~~~~~


@@ -97,20 +73,8 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy SRv6.*
 
 
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy SRv6.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E "78B-1t1c-ethip6.*srv6.*pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/srv6
-      $ grep -E "78B-1t1c-ethip6.*srv6.*pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/srv6?h=rls1804>`_.

 
 VPP PDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
 
 VPP PDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.


@@ -131,17 +95,5 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv6
 Routed-Forwarding.*
 
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv6
 Routed-Forwarding.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E "78B-2t2c-ethip6.*srv6.*pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/srv6
-      $ grep -E "78B-2t2c-ethip6.*srv6.*pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/srv6?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/vm_vhost.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/vm_vhost.rst
index 938e06f..af8eec2 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/vm_vhost.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/vm_vhost.rst
@@ -30,6 +30,9 @@ in the graph below.
 *Figure 1a. VPP 1thread 1core - NDR Throughput for Phy-to-VM-to-Phy VM vhost-user
 selected TCs.*
 
 *Figure 1a. VPP 1thread 1core - NDR Throughput for Phy-to-VM-to-Phy VM vhost-user
 selected TCs.*
 

+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
+

 .. raw:: html
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-vhost-sel2-ndrdisc.html"></iframe>
 .. raw:: html
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-vhost-sel2-ndrdisc.html"></iframe>


@@ -46,20 +49,8 @@ selected TCs.*
 *Figure 1b. VPP 1thread 1core - NDR Throughput for Phy-to-VM-to-Phy VM
 vhost-user selected TCs.*
 
 *Figure 1b. VPP 1thread 1core - NDR Throughput for Phy-to-VM-to-Phy VM
 vhost-user selected TCs.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-1t1c-(eth|ethip4)-.*vhost.*-ndrdisc" *0-eth*-*-ndrpdrdisc.robot
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/vm_vhost
-      $ grep -E "64B-1t1c-(eth|ethip4)-.*vhost.*-pdrdisc" *0-eth*-*-ndrpdrdisc.robot
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.

 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.


@@ -80,6 +71,9 @@ in the graph below.
 *Figure 2a. VPP 2threads 2cores - NDR Throughput for Phy-to-VM-to-Phy VM
 vhost-user selected TCs.*
 
 *Figure 2a. VPP 2threads 2cores - NDR Throughput for Phy-to-VM-to-Phy VM
 vhost-user selected TCs.*
 

+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
+

 .. raw:: html
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-vhost-sel2-ndrdisc.html"></iframe>
 .. raw:: html
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-vhost-sel2-ndrdisc.html"></iframe>


@@ -96,20 +90,8 @@ vhost-user selected TCs.*
 *Figure 2b. VPP 2threads 2cores - NDR Throughput for Phy-to-VM-to-Phy VM
 vhost-user selected TCs.*
 
 *Figure 2b. VPP 2threads 2cores - NDR Throughput for Phy-to-VM-to-Phy VM
 vhost-user selected TCs.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-2t2c-(eth|ethip4)-.*vhost.*-ndrdisc" *0-eth*-*-ndrpdrdisc.robot
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/vm_vhost
-      $ grep -E "64B-2t2c-(eth|ethip4)-.*vhost.*-pdrdisc" *0-eth*-*-ndrpdrdisc.robot
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.

 
 PDR Throughput
 ~~~~~~~~~~~~~~
 
 PDR Throughput
 ~~~~~~~~~~~~~~


@@ -133,6 +115,9 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 *Figure 3a. VPP 1thread 1core - PDR Throughput for Phy-to-VM-to-Phy VM
 vhost-user selected TCs.*
 
 *Figure 3a. VPP 1thread 1core - PDR Throughput for Phy-to-VM-to-Phy VM
 vhost-user selected TCs.*
 

+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
+

 .. raw:: html
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-vhost-sel2-pdrdisc.html"></iframe>
 .. raw:: html
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-vhost-sel2-pdrdisc.html"></iframe>


@@ -149,20 +134,8 @@ vhost-user selected TCs.*
 *Figure 3b. VPP 1thread 1core - PDR Throughput for Phy-to-VM-to-Phy VM
 vhost-user selected TCs.*
 
 *Figure 3b. VPP 1thread 1core - PDR Throughput for Phy-to-VM-to-Phy VM
 vhost-user selected TCs.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-1t1c-(eth|ethip4)-.*vhost.*-pdrdisc" *0-eth*-*-ndrpdrdisc.robot
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/vm_vhost
-      $ grep -E "64B-1t1c-(eth|ethip4)-.*vhost.*-pdrdisc" *0-eth*-*-ndrpdrdisc.robot
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.

 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.


@@ -183,6 +156,9 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 *Figure 4a. VPP 2thread 2core - PDR Throughput for Phy-to-VM-to-Phy VM
 vhost-user selected TCs.*
 
 *Figure 4a. VPP 2thread 2core - PDR Throughput for Phy-to-VM-to-Phy VM
 vhost-user selected TCs.*
 

+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
+

 .. raw:: html
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-vhost-sel2-pdrdisc.html"></iframe>
 .. raw:: html
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-vhost-sel2-pdrdisc.html"></iframe>


@@ -199,17 +175,5 @@ vhost-user selected TCs.*
 *Figure 4b. VPP 2thread 2core - PDR Throughput for Phy-to-VM-to-Phy VM
 vhost-user selected TCs.*
 
 *Figure 4b. VPP 2thread 2core - PDR Throughput for Phy-to-VM-to-Phy VM
 vhost-user selected TCs.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-2t2c-(eth|ethip4)-.*vhost.*-pdrdisc" *0-eth*-*-ndrpdrdisc.robot
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/vm_vhost
-      $ grep -E "64B-2t2c-(eth|ethip4)-.*vhost.*-pdrdisc" *0-eth*-*-ndrpdrdisc.robot
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_memif.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_memif.rst
index f2c8323..4fb8791 100644 (file)
--- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_memif.rst
+++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_memif.rst
@@ -34,20 +34,8 @@ NIC 10ge2p1x520
 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).*
 
 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/container_memif
-      $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/container_memif?h=rls1804>`_.

 
 PDR Throughput
 --------------
 
 PDR Throughput
 --------------


@@ -74,17 +62,5 @@ NIC 10ge2p1x520
 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).*
 
 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/container_memif
-      $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/container_memif?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_orchestrated.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_orchestrated.rst
index 5bc49a7..4e8ff4c 100644 (file)
--- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_orchestrated.rst
+++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_orchestrated.rst
@@ -34,20 +34,8 @@ NIC 10ge2p1x520
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" 10ge2p1x520*
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/kubernetes/perf/container_memif
-      $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" 10ge2p1x520*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/kubernetes/perf/container_memif?h=rls1804>`_.

 
 NIC 10ge2p1x710
 ~~~~~~~~~~~~~~~
 
 NIC 10ge2p1x710
 ~~~~~~~~~~~~~~~


@@ -68,20 +56,8 @@ NIC 10ge2p1x710
 *Figure 2. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
 *Figure 2. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" 10ge2p1x710*
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/kubernetes/perf/container_memif
-      $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" 10ge2p1x710*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/kubernetes/perf/container_memif?h=rls1804>`_.

 
 PDR Throughput
 --------------
 
 PDR Throughput
 --------------


@@ -108,20 +84,8 @@ NIC 10ge2p1x520
 *Figure 3. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
 *Figure 3. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" 10ge2p1x520*
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/kubernetes/perf/container_memif
-      $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" 10ge2p1x520*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/kubernetes/perf/container_memif?h=rls1804>`_.

 
 NIC 10ge2p1x710
 ~~~~~~~~~~~~~~~
 
 NIC 10ge2p1x710
 ~~~~~~~~~~~~~~~


@@ -142,17 +106,5 @@ NIC 10ge2p1x710
 *Figure 4. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
 *Figure 4. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" 10ge2p1x710*
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/kubernetes/perf/container_memif
-      $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" 10ge2p1x710*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/kubernetes/perf/container_memif?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4.rst
index 5f2e7d2..0b2b7ef 100644 (file)
--- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4.rst
+++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4.rst
@@ -34,20 +34,8 @@ NIC 10ge2p1x520
 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.*
 
 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -E '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520*
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip4
-      $ grep -E '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4?h=rls1804>`_.

 
 NIC 40ge2p1xl710
 ~~~~~~~~~~~~~~~~
 
 NIC 40ge2p1xl710
 ~~~~~~~~~~~~~~~~


@@ -68,20 +56,8 @@ NIC 40ge2p1xl710
 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.*
 
 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 40ge2p1xl710*
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip4
-      $ grep -P '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 40ge2p1xl710*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4?h=rls1804>`_.

 
 PDR Throughput
 --------------
 
 PDR Throughput
 --------------


@@ -109,17 +85,5 @@ NIC 10ge2p1x520
 *Figure 3. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.*
 
 *Figure 3. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -E '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520*
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip4
-      $ grep -E '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4_tunnels.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4_tunnels.rst
index 4b4777c..001584b 100644 (file)
--- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4_tunnels.rst
+++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4_tunnels.rst
@@ -34,20 +34,8 @@ NIC 10ge2p1x520
 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.*
 
 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-(1t1c|2t2c|4t4c)-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip4_tunnels
-      $ grep -E "64B-(1t1c|2t2c|4t4c)-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4_tunnels?h=rls1804>`_.

 
 PDR Throughput
 --------------
 
 PDR Throughput
 --------------


@@ -74,17 +62,5 @@ NIC 10ge2p1x520
 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.*
 
 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-(1t1c|2t2c|4t4c)-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip4_tunnels
-      $ grep -E "64B-(1t1c|2t2c|4t4c)-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4_tunnels?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6.rst
index d17f76d..e8c70d0 100644 (file)
--- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6.rst
+++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6.rst
@@ -35,20 +35,8 @@ NIC 10ge2p1x520
 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.*
 
 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520*
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip6
-      $ grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6?h=rls1804>`_.

 
 NIC 40ge2p1xl710
 ~~~~~~~~~~~~~~~~
 
 NIC 40ge2p1xl710
 ~~~~~~~~~~~~~~~~


@@ -69,20 +57,8 @@ NIC 40ge2p1xl710
 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.*
 
 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-ndrdisc' 40ge2p1xl710*
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip6
-      $ grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-ndrdisc' 40ge2p1xl710*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6?h=rls1804>`_.

 
 PDR Throughput
 --------------
 
 PDR Throughput
 --------------


@@ -110,17 +86,5 @@ NIC 10ge2p1x520
 *Figure 3. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.*
 
 *Figure 3. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-pdrdisc' 10ge2p1x520*
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip6
-      $ grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-pdrdisc' 10ge2p1x520*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6_tunnels.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6_tunnels.rst
index 8438aa7..3965242 100644 (file)
--- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6_tunnels.rst
+++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6_tunnels.rst
@@ -34,20 +34,8 @@ NIC 10ge2p1x520
 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy IPv6 Overlay Tunnels.*
 
 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy IPv6 Overlay Tunnels.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-(1t1c|2t2c|4t4c)-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip6_tunnels
-      $ grep -E "78B-(1t1c|2t2c|4t4c)-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6_tunnels?h=rls1804>`_.

 
 PDR Throughput
 --------------
 
 PDR Throughput
 --------------


@@ -74,17 +62,5 @@ NIC 10ge2p1x520
 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy IPv6 Overlay Tunnels.*
 
 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy IPv6 Overlay Tunnels.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-(1t1c|2t2c|4t4c)-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/ip6_tunnels
-      $ grep -E "78B-(1t1c|2t2c|4t4c)-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6_tunnels?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst
index 46d4265..a5a4d7d 100644 (file)
--- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst
+++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst
@@ -36,20 +36,8 @@ NIC 40ge2p1xl710
 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy IPSEC HW.*
 
 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy IPSEC HW.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-(1t1c|2t2c|4t4c)-ethip4ipsec(base|tpt).*-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/crypto
-      $ grep -E "64B-(1t1c|2t2c|4t4c)-ethip4ipsec(base|tpt).*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls1804>`_.

 
 PDR Throughput
 --------------
 
 PDR Throughput
 --------------


@@ -79,17 +67,5 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy IPSEC HW.*
 
 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy IPSEC HW.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-(1t1c|2t2c|4t4c)-ethip4ipsec(base|tpt).*-ndrdisc" *
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/crypto
-      $ grep -E "64B-(1t1c|2t2c|4t4c)-ethip4ipsec(base|tpt).*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/l2.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/l2.rst
index 3c0a37e..5db8eba 100644 (file)
--- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/l2.rst
+++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/l2.rst
@@ -34,19 +34,8 @@ NIC 10ge2p1x520
 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy L2 Ethernet Switching.*
 
 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy L2 Ethernet Switching.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(eth.*)*ndrdisc" 10ge2p1x520*
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(eth.*)*ndrdisc" tests/vpp/perf/l2/10ge2p1x520*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.

 
 NIC 40ge2p1xl710
 ~~~~~~~~~~~~~~~~
 
 NIC 40ge2p1xl710
 ~~~~~~~~~~~~~~~~


@@ -67,19 +56,8 @@ NIC 40ge2p1xl710
 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy L2 Ethernet Switching.*
 
 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy L2 Ethernet Switching.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" 40ge2p1xl710*
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/40ge2p1xl710*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.

 
 PDR Throughput
 --------------
 
 PDR Throughput
 --------------


@@ -107,16 +85,5 @@ NIC 10ge2p1x520
 *Figure 3. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy L2 Ethernet Switching.*
 
 *Figure 3. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy L2 Ethernet Switching.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(eth.*)*pdrdisc" 10ge2p1x520*
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(eth.*)*pdrdisc" tests/vpp/perf/l2/10ge2p1x520*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/srv6.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/srv6.rst
index 9f96654..4ece4d5 100644 (file)
--- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/srv6.rst
+++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/srv6.rst
@@ -35,20 +35,8 @@ NIC 10ge2p1x520
 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy SRv6.*
 
 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy SRv6.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E '78B-(1t1c|2t2c|4t4c)-ethip6.*srv6.*ndrdisc' 10ge2p1x520*
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/srv6
-      $ grep -E '78B-(1t1c|2t2c|4t4c)-ethip6.*srv6.*ndrdisc' 10ge2p1x520*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/srv6?h=rls1804>`_.

 
 PDR Throughput
 --------------
 
 PDR Throughput
 --------------


@@ -76,17 +64,5 @@ NIC 10ge2p1x520
 *Figure 3. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy SRv6.*
 
 *Figure 3. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy SRv6.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E '78B-(1t1c|2t2c|4t4c)-ethip6.*srv6.*pdrdisc' 10ge2p1x520*
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/srv6
-      $ grep -E '78B-(1t1c|2t2c|4t4c)-ethip6.*srv6.*pdrdisc' 10ge2p1x520*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/srv6?h=rls1804>`_.

diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/vm_vhost.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/vm_vhost.rst
index fe4d4de..9bd49b4 100644 (file)
--- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/vm_vhost.rst
+++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/vm_vhost.rst
@@ -33,6 +33,9 @@ NIC 10ge2p1x520
 *Figure 1a. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 
 *Figure 1a. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 

+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
+

 .. raw:: html
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/10ge2p1x520-64B-vhost-sel2-tsa-ndrdisc.html"></iframe>
 .. raw:: html
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/10ge2p1x520-64B-vhost-sel2-tsa-ndrdisc.html"></iframe>


@@ -49,20 +52,8 @@ NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 *Figure 1b. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 
 *Figure 1b. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|ethip4)-.*vhost.*-ndrdisc" 10ge2p1x520*-ndrpdrdisc.robot
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/vm_vhost
-      $ grep -E "grep -E "64B-(1t1c|2t2c|4t4c)-(eth|ethip4)-.*vhost.*-ndrdisc" 10ge2p1x520*-ndrpdrdisc.robot
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.

 
 NIC 10ge2p1x710
 ~~~~~~~~~~~~~~~
 
 NIC 10ge2p1x710
 ~~~~~~~~~~~~~~~


@@ -83,20 +74,8 @@ NIC 10ge2p1x710
 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 
 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-ndrdisc" 10ge2p1x710*
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/vm_vhost
-      $ grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-ndrdisc" 10ge2p1x710*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.

 
 NIC 40ge2p1xl710
 ~~~~~~~~~~~~~~~~
 
 NIC 40ge2p1xl710
 ~~~~~~~~~~~~~~~~


@@ -117,6 +96,9 @@ NIC 40ge2p1xl710
 *Figure 3a. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 
 *Figure 3a. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 

+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
+

 .. raw:: html
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/40ge2p1xl710-64B-vhost-sel2-tsa-ndrdisc.html"></iframe>
 .. raw:: html
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/40ge2p1xl710-64B-vhost-sel2-tsa-ndrdisc.html"></iframe>


@@ -133,20 +115,8 @@ NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 *Figure 3b. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 
 *Figure 3b. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-ndrdisc" 40ge2p1xl710*
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/vm_vhost
-      $ grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-ndrdisc" 40ge2p1xl710*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.

 
 PDR Throughput
 --------------
 
 PDR Throughput
 --------------


@@ -173,6 +143,9 @@ NIC 10ge2p1x520
 *Figure 4a. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 
 *Figure 4a. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 

+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
+

 .. raw:: html
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/10ge2p1x520-64B-vhost-sel2-tsa-pdrdisc.html"></iframe>
 .. raw:: html
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/10ge2p1x520-64B-vhost-sel2-tsa-pdrdisc.html"></iframe>


@@ -189,20 +162,8 @@ PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 *Figure 4b. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 
 *Figure 4b. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|ethip4)-.*vhost.*-pdrdisc" 10ge2p1x520*-ndrpdrdisc.robot
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/vm_vhost
-      $ grep -E "grep -E "64B-(1t1c|2t2c|4t4c)-(eth|ethip4)-.*vhost.*-pdrdisc" 10ge2p1x520*-ndrpdrdisc.robot
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.

 
 NIC 10ge2p1x710
 ~~~~~~~~~~~~~~~
 
 NIC 10ge2p1x710
 ~~~~~~~~~~~~~~~


@@ -223,20 +184,8 @@ NIC 10ge2p1x710
 *Figure 5. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 
 *Figure 5. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-pdrdisc" 10ge2p1x710*
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/vm_vhost
-      $ grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-pdrdisc" 10ge2p1x710*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.

 
 NIC 40ge2p1xl710
 ~~~~~~~~~~~~~~~~
 
 NIC 40ge2p1xl710
 ~~~~~~~~~~~~~~~~


@@ -257,6 +206,9 @@ NIC 40ge2p1xl710
 *Figure 6a. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 
 *Figure 6a. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 

+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
+

 .. raw:: html
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/40ge2p1xl710-64B-vhost-sel2-tsa-pdrdisc.html"></iframe>
 .. raw:: html
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/40ge2p1xl710-64B-vhost-sel2-tsa-pdrdisc.html"></iframe>


@@ -273,17 +225,5 @@ PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 *Figure 6b. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 
 *Figure 6b. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
 PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
 

-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
-   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-pdrdisc" 40ge2p1xl710*
-      :shell:
-
-.. only:: latex
-
-   .. code-block:: bash
-
-      $ cd tests/vpp/perf/vm_vhost
-      $ grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-pdrdisc" 40ge2p1xl710*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.