Tests: Add IPSEC SW scale tests 31/19631/2
authorTibor Frank <tifrank@cisco.com>
Thu, 16 May 2019 08:55:00 +0000 (10:55 +0200)
committerJan Gelety <jgelety@cisco.com>
Thu, 16 May 2019 12:16:42 +0000 (12:16 +0000)
Change-Id: I4339059a0cf67acce668abe42aab59bbb17916d9
Signed-off-by: Tibor Frank <tifrank@cisco.com>
tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-int-aes-gcm-ndrpdr.robot [new file with mode: 0644]
tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-int-cbc-sha1-ndrpdr.robot [new file with mode: 0644]
tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes-gcm-ndrpdr.robot [new file with mode: 0644]
tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-tnl-cbc-sha1-ndrpdr.robot [new file with mode: 0644]

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-int-aes-gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-int-aes-gcm-ndrpdr.robot
new file mode 100644 (file)
index 0000000..6064e91
--- /dev/null
@@ -0,0 +1,161 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/crypto/ipsec.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
+| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | AES_GCM
+| ...
+| Suite Setup | Run Keywords
+| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev
+| ... | AND | Set up performance test suite with crypto ipsecmb
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance test
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
+| ... | Eth-IPv4-IPSec on DUT1-DUT2
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW
+| ... | crypto devices and multiple IPsec tunnels between them.
+| ... | DUTs get IPv4 traffic from TG, encrypt it
+| ... | and send to another DUT, where packets are decrypted and sent back to TG
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, number of flows per flow-group equals to
+| ... | number of IPSec tunnels) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
+| ... | static payload. MAC addresses are matching MAC addresses of the TG
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| ... | is applied to both streams.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| ${nic_name}= | Intel-X710
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.2
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 172.168.1.1
+| ${dut2_if1_ip4}= | 172.168.1.2
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.2
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${32}
+| ${n_tunnels}= | ${1000}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg} = | Crypto Alg AES GCM 128
+| | ${auth_alg} = | Integ Alg AES GCM 128
+| | ${ipsec_proto} = | IPsec Proto ESP
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
+| | Set Max Rate And Jumbo And Handle Multi Seg
+| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology
+| | ... | aesni_gcm | ${phy_cores}
+| | And Add DPDK dev default RXD to all DUTs | 2048
+| | And Add DPDK dev default TXD to all DUTs | 2048
+| | And Apply startup configuration on all VPP DUTs
+| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg}
+| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1}
+| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1}
+| | And VPP IPsec Backend Dump | ${dut1}
+| | And VPP IPsec Backend Dump | ${dut2}
+| | And Initialize IPSec in 3-node circular topology
+| | And VPP IPsec Create Tunnel Interfaces
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsecscale1000tnlsw-ip4base-int-aes-gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsecscale1000tnlsw-ip4base-int-aes-gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsecscale1000tnlsw-ip4base-int-aes-gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsecscale1000tnlsw-ip4base-int-aes-gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsecscale1000tnlsw-ip4base-int-aes-gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsecscale1000tnlsw-ip4base-int-aes-gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc07-9000B-1c-ethip4ipsecscale1000tnlsw-ip4base-int-aes-gcm-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| tc08-9000B-2c-ethip4ipsecscale1000tnlsw-ip4base-int-aes-gcm-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| tc09-9000B-4c-ethip4ipsecscale1000tnlsw-ip4base-int-aes-gcm-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsecscale1000tnlsw-ip4base-int-aes-gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsecscale1000tnlsw-ip4base-int-aes-gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsecscale1000tnlsw-ip4base-int-aes-gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-int-cbc-sha1-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-int-cbc-sha1-ndrpdr.robot
new file mode 100644 (file)
index 0000000..a22d5af
--- /dev/null
@@ -0,0 +1,156 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/crypto/ipsec.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
+| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | CBC_SHA1
+| ...
+| Suite Setup | Run Keywords
+| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev
+| ... | AND | Set up performance test suite with crypto ipsecmb
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance test
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
+| ... | Eth-IPv4-IPSec on DUT1-DUT2
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW
+| ... | crypto devices and multiple IPsec tunnels between them.
+| ... | DUTs get IPv4 traffic from TG, encrypt it
+| ... | and send to another DUT, where packets are decrypted and sent back to TG
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, number of flows per flow-group equals to
+| ... | number of IPSec tunnels) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
+| ... | static payload. MAC addresses are matching MAC addresses of the TG
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| ... | is applied to both streams.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| ${nic_name}= | Intel-X710
+| ${overhead}= | ${58}
+| ${tg_if1_ip4}= | 192.168.10.2
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 172.168.1.1
+| ${dut2_if1_ip4}= | 172.168.1.2
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.2
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${32}
+| ${n_tunnels}= | ${1000}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES CBC 128
+| | ${auth_alg}= | Integ Alg SHA1 96
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
+| | Set Max Rate And Jumbo And Handle Multi Seg
+| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology
+| | ... | aesni_mb | ${phy_cores}
+| | And Add DPDK dev default RXD to all DUTs | 2048
+| | And Add DPDK dev default TXD to all DUTs | 2048
+| | And Apply startup configuration on all VPP DUTs
+| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg}
+| | And Initialize IPSec in 3-node circular topology
+| | And VPP IPsec Create Tunnel Interfaces
+| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
+| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsecscale1000tnlsw-ip4base-int-cbc-sha1-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsecscale1000tnlsw-ip4base-int-cbc-sha1-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsecscale1000tnlsw-ip4base-int-cbc-sha1-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsecscale1000tnlsw-ip4base-int-cbc-sha1-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsecscale1000tnlsw-ip4base-int-cbc-sha1-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsecscale1000tnlsw-ip4base-int-cbc-sha1-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc07-9000B-1c-ethip4ipsecscale1000tnlsw-ip4base-int-cbc-sha1-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| tc08-9000B-2c-ethip4ipsecscale1000tnlsw-ip4base-int-cbc-sha1-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| tc09-9000B-4c-ethip4ipsecscale1000tnlsw-ip4base-int-cbc-sha1-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsecscale1000tnlsw-ip4base-int-cbc-sha1-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsecscale1000tnlsw-ip4base-int-cbc-sha1-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsecscale1000tnlsw-ip4base-int-cbc-sha1-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes-gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes-gcm-ndrpdr.robot
new file mode 100644 (file)
index 0000000..2bdc7f2
--- /dev/null
@@ -0,0 +1,168 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/crypto/ipsec.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
+| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE | AES_GCM
+| ...
+| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name}
+| ... | SW_cryptodev
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance test
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *IPv4 IPsec tunnel mode performance test suite.*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
+| ... | Eth-IPv4-IPSec on DUT1-DUT2
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW
+| ... | crypto devices and multiple IPsec tunnels between them. DUTs get IPv4
+| ... | traffic from TG, encrypt it and send to another DUT, where packets are
+| ... | decrypted and sent back to TG.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, number of flows per flow-group equals to
+| ... | number of IPSec tunnels) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
+| ... | static payload. MAC addresses are matching MAC addresses of the TG
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| ... | is applied to both streams.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| ${nic_name}= | Intel-X710
+| ${overhead}= | ${54}
+| ${tg_if1_ip4}= | 192.168.10.2
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 172.168.1.1
+| ${dut2_if1_ip4}= | 172.168.1.2
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.2
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${32}
+| ${n_tunnels}= | ${1000}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - search_type - NDR or PDR. Type: string
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ... | - min_rate - Min rate for binary search, default value: ${50000}.
+| | ... | Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES GCM 128
+| | ${auth_alg}= | Integ Alg AES GCM 128
+| | ${ipsec_proto}= | IPsec Proto ESP
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
+| | Set Max Rate And Jumbo And Handle Multi Seg
+| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology
+| | ... | aesni_gcm | ${phy_cores}
+| | And Add DPDK dev default RXD to all DUTs | 2048
+| | And Add DPDK dev default TXD to all DUTs | 2048
+| | And Apply startup configuration on all VPP DUTs
+| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg}
+| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1}
+| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1}
+| | And VPP IPsec Backend Dump | ${dut1}
+| | And VPP IPsec Backend Dump | ${dut2}
+| | And Initialize IPSec in 3-node circular topology
+| | And Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | gateway=${dut2_if1_ip4}
+| | ... | interface=${dut1_if2}
+| | And Vpp Route Add | ${dut2} | ${laddr_ip4} | 8 | gateway=${dut1_if2_ip4}
+| | ... | interface=${dut2_if1}
+| | And VPP IPsec Add Multiple Tunnels
+| | ... | ${dut1} | ${dut2} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels}
+| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key}
+| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4}
+| | ... | ${addr_range}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes-gcm-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes-gcm-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes-gcm-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes-gcm-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes-gcm-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes-gcm-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc07-9000B-1c-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes-gcm-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| tc08-9000B-2c-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes-gcm-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| tc09-9000B-4c-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes-gcm-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes-gcm-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes-gcm-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsecscale1000tnlsw-ip4base-tnl-aes-gcm-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-tnl-cbc-sha1-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnlsw-ip4base-tnl-cbc-sha1-ndrpdr.robot
new file mode 100644 (file)
index 0000000..a5eab25
--- /dev/null
@@ -0,0 +1,163 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/crypto/ipsec.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
+| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE | CBC_SHA1
+| ...
+| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name}
+| ... | SW_cryptodev
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance test
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *IPv4 IPsec tunnel mode performance test suite.*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
+| ... | Eth-IPv4-IPSec on DUT1-DUT2
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW
+| ... | crypto devices and multiple IPsec tunnels between them. DUTs get IPv4
+| ... | traffic from TG, encrypt it and send to another DUT, where packets are
+| ... | decrypted and sent back to TG.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, number of flows per flow-group equals to
+| ... | number of IPSec tunnels) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
+| ... | static payload. MAC addresses are matching MAC addresses of the TG
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
+| ... | is applied to both streams.
+| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
+
+*** Variables ***
+| ${nic_name}= | Intel-X710
+| ${overhead}= | ${58}
+| ${tg_if1_ip4}= | 192.168.10.2
+| ${dut1_if1_ip4}= | 192.168.10.1
+| ${dut1_if2_ip4}= | 172.168.1.1
+| ${dut2_if1_ip4}= | 172.168.1.2
+| ${dut2_if2_ip4}= | 192.168.20.1
+| ${tg_if2_ip4}= | 192.168.20.2
+| ${raddr_ip4}= | 20.0.0.0
+| ${laddr_ip4}= | 10.0.0.0
+| ${addr_range}= | ${32}
+| ${n_tunnels}= | ${1000}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - search_type - NDR or PDR. Type: string
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ... | - min_rate - Min rate for binary search, default value: ${50000}.
+| | ... | Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES CBC 128
+| | ${auth_alg}= | Integ Alg SHA1 96
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
+| | Set Max Rate And Jumbo And Handle Multi Seg
+| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology
+| | ... | aesni_mb | ${phy_cores}
+| | And Add DPDK dev default RXD to all DUTs | 2048
+| | And Add DPDK dev default TXD to all DUTs | 2048
+| | And Apply startup configuration on all VPP DUTs
+| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg}
+| | And Initialize IPSec in 3-node circular topology
+| | And Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | gateway=${dut2_if1_ip4}
+| | ... | interface=${dut1_if2}
+| | And Vpp Route Add | ${dut2} | ${laddr_ip4} | 8 | gateway=${dut1_if2_ip4}
+| | ... | interface=${dut2_if1}
+| | And VPP IPsec Add Multiple Tunnels
+| | ... | ${dut1} | ${dut2} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels}
+| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key}
+| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4}
+| | ... | ${addr_range}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsecscale1000tnlsw-ip4base-tnl-cbc-sha1-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsecscale1000tnlsw-ip4base-tnl-cbc-sha1-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsecscale1000tnlsw-ip4base-tnl-cbc-sha1-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsecscale1000tnlsw-ip4base-tnl-cbc-sha1-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsecscale1000tnlsw-ip4base-tnl-cbc-sha1-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsecscale1000tnlsw-ip4base-tnl-cbc-sha1-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc07-9000B-1c-ethip4ipsecscale1000tnlsw-ip4base-tnl-cbc-sha1-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| tc08-9000B-2c-ethip4ipsecscale1000tnlsw-ip4base-tnl-cbc-sha1-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| tc09-9000B-4c-ethip4ipsecscale1000tnlsw-ip4base-tnl-cbc-sha1-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsecscale1000tnlsw-ip4base-tnl-cbc-sha1-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsecscale1000tnlsw-ip4base-tnl-cbc-sha1-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsecscale1000tnlsw-ip4base-tnl-cbc-sha1-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}

©2016 FD.io a Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation. Linux is a registered trademark of Linus Torvalds.
Please see our privacy policy and terms of use.