Tox: Remove obsolete checkers

+ coverage is not used
+ naming is now covered fully by suitegen which can be
  improved to do detections of packet encapsulations

Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I9631988e144d3878a6b146214e3aea75694ebf3f

diff --git a/resources/libraries/bash/entry/check/tc_coverage.sh b/resources/libraries/bash/entry/check/tc_coverage.sh
deleted file mode 100644 (file)
index 66afbb4..0000000
--- a/resources/libraries/bash/entry/check/tc_coverage.sh
+++ /dev/null
@@ -1,100 +0,0 @@
-#!/usr/bin/env bash
-
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-set -xeuo pipefail
-
-# This file should be executed from tox, as the assumend working directory
-# is different from where this file is located.
-# This file does not have executable flag nor shebang,
-# to dissuade non-tox callers.
-
-# "set -eu" handles failures from the following two lines.
-BASH_CHECKS_DIR="$(dirname $(readlink -e "${BASH_SOURCE[0]}"))"
-BASH_FUNCTION_DIR="$(readlink -e "${BASH_CHECKS_DIR}/../../function")"
-source "${BASH_FUNCTION_DIR}/common.sh" || {
-    echo "Source failed." >&2
-    exit 1
-}
-
-# Grep of interest: We want all tc01- prefixed (skip TC variations for now).
-# Currently script assumes all variations inside to be part of either
-# auto-generation or not checked at all (VIRL derivates).
-r_grep="tc01-"
-# Parse grep of interest (learn path, learn suite, learn testcase name).
-r_parse='(.*)\/(.*).robot.*(tc[[:digit:]]{2}-.*)'
-
-rm -f "tc_coverage.log" || die
-
-# Disabling -x: Following lines are doing too much garbage output.
-set +x
-
-# Grep interest.
-grep_match=$(grep -RE "${r_grep}" tests/*) || die
-# Extract data from the grep output.
-suites_dirs=($(printf "${grep_match}" | sed -re "s/${r_parse}/\1/")) || die
-suites_names=($(printf "${grep_match}" | sed -re "s/${r_parse}/\2/")) || die
-testcases_names=($(printf "${grep_match}" | sed -re "s/${r_parse}/\3/")) || die
-
-# Extract 2N suites from the global testcase list and normalize output.
-suites_2n=($(printf '%s\n' "${suites_names[@]}" | \
-           grep -E "^(2n1l|2n)-" | \
-           sed -re "s/(2n1l|2n)-//"))
-# Extract 3N suites from the global testcase list.
-suites_3n=($(printf '%s\n' "${suites_names[@]}" | \
-           grep -vE "^(2n1l|2n|eth2p)-"))
-# Extract vpp_device suites from the global testcase list.
-# Code will try to map the naming to perf by normalizing output.
-suites_dev=($(printf '%s\n' "${suites_names[@]}" | \
-            grep -E "^eth2p-" | \
-            sed -re "s/eth2p-/10ge2p1x710-/" | \
-            sed -re "s/-dev/-ndrpdr/" | \
-            sed -re "s/-ethicmpv/-ethip/"))
-
-# Compute intersection of arrays.
-intersection_3n2n=($(comm -12 <(printf '%s\n' "${suites_3n[@]}" | sort) \
-    <(printf '%s\n' "${suites_2n[@]}" | sort)))
-intersection_3ndev=($(comm -12 <(printf '%s\n' "${suites_2n[@]}" | sort) \
-    <(printf '%s\n' "${suites_dev[@]}" | sort)))
-
-# Print the results in CSV format.
-echo "Suite name;Testcase name;2n version;VPP Device version" \
-    > tc_coverage.log
-for i in "${!suites_names[@]}"; do
-    if [[ ! "${suites_names[i]}" =~ ^(2n1l|2n|eth2p)-.* ]]; then
-        echo -n "${suites_names[i]};${testcases_names[i]}" \
-            >> tc_coverage.log
-        if [[ "${intersection_3n2n[@]}" =~ "${suites_names[i]}" ]]; then
-            echo -n ";yes" >> tc_coverage.log
-        else
-            echo -n ";no" >> tc_coverage.log
-        fi
-        if [[ "${intersection_3ndev[@]}" =~ "${suites_names[i]}" ]]; then
-            echo ";yes" >> tc_coverage.log
-        else
-            echo ";no" >> tc_coverage.log
-        fi
-    fi
-done
-
-set -x
-
-echo "Count 2n: ${#suites_2n[@]}"
-echo "Count 3n: ${#suites_3n[@]}"
-echo "Count dev: ${#suites_dev[@]}"
-echo "Coverage 2n3n: ${#intersection_3n2n[@]}"
-echo "Coverage 3ndev: ${#intersection_3ndev[@]}"
-
-warn
-warn "Testcase coverage checker: PASS"

diff --git a/tox.ini b/tox.ini
index e8b28f0..3783bba 100644 (file)
--- a/tox.ini
+++ b/tox.ini
@@ -26,7 +26,7 @@
 
 [tox]
 # Fast and brief checkers to front, slow or verbose checkers to back.
 
 [tox]
 # Fast and brief checkers to front, slow or verbose checkers to back.

-envlist = job_spec, tc_naming, tc_coverage, copyright_year, gpl_license,
+envlist = job_spec, copyright_year, gpl_license,

     new_line_length, line_length, autogen, pylint, doc_verify
 
 # The following is needed as tox requires setup.py by default.
     new_line_length, line_length, autogen, pylint, doc_verify
 
 # The following is needed as tox requires setup.py by default.


@@ -95,18 +95,6 @@ deps =
 whitelist_externals = /bin/bash
 commands = bash {[tox]checker_dir}/pylint.sh
 
 whitelist_externals = /bin/bash
 commands = bash {[tox]checker_dir}/pylint.sh
 

-# TODO: See FIXME in https://gerrit.fd.io/r/16423
-
-[testenv:tc_coverage]
-# Coverage is not needed to be voting.
-ignore_outcome = true
-whitelist_externals = /bin/bash
-commands = bash {[tox]checker_dir}/tc_coverage.sh
-
-[testenv:tc_naming]
-whitelist_externals = /bin/bash
-commands = bash {[tox]checker_dir}/tc_naming.sh
-

 # Keep testenvs sorted alphabetically, please.
 
 # TODO: Add a checker against unresolved merge conflicts.
 # Keep testenvs sorted alphabetically, please.
 
 # TODO: Add a checker against unresolved merge conflicts.