3n-hsw-xl710
~~~~~~~~~~~~
-.. todo::
- Introduction
-
CSIT source code for the test cases used for plots can be found in
`CSIT git repository <https://git.fd.io/csit/tree/tests/dpdk/perf?h=rls2001>`_.
Packet Latency
==============
-.. todo::
- Introduction
+DPDK Testpmd and L3fwd latency results are generated based on the test
+data obtained from |csit-release| NDR-PDR throughput tests executed
+across physical testbeds hosted in LF FD.io labs: 3n-hsw, 3n-skx, 2n-
+skx, 2n-clx, 3n-dnv, 2n-dnv, 3n-tsh.
+
+Latency by percentile distribution plots are used to show packet latency
+percentiles at different packet rate load levels: i) No-Load latency
+streams only, ii) Low-Load at 10% PDR, iii) Mid-Load at 50% PDR and iv)
+High-Load at 90% PDR.
+
+Additional information about graph data:
+
+#. **Graph Title**: describes tested DUT packet path.
+
+#. **X-axis Labels**: percentile of packets.
+
+#. **Y-axis Labels**: measured one-way packet latency values in [uSec].
+
+#. **Graph Legend**: list of latency tests at different packet rate load
+ level.
+
+#. **Hover Information**: packet rate load level, stream direction
+ (East-West, West-East), percentile, one-way latency.
.. note::
Test results have been generated by
- `FD.io test executor dpdk performance job 2n-skx`_,
- `FD.io test executor dpdk performance job 3n-skx`_,
- `FD.io test executor dpdk performance job 2n-clx`_, and
`FD.io test executor dpdk performance job 3n-hsw`_ with RF
result files csit-dpdk-perf-|srelease|-\*.zip
`archived here <../../_static/archive/>`_.
- Required per test case data set size is **10** and for DPDK tests
- this is the actual size, as all scheduled test executions completed
- successfully.
.. toctree::
:maxdepth: 3
LXC/DRC Container Memif
=======================
-.. todo::
- Introduction
-
CSIT source code for the test cases used for plots can be found in
`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/container_memif?h=rls2001>`_.
Packet Latency
==============
-.. todo::
- Introduction
+VPP latency results are generated based on the test data obtained from
+|csit-release| NDR-PDR throughput tests executed across physical
+testbeds hosted in LF FD.io labs: 3n-hsw, 3n-skx, 2n- skx, 2n-clx,
+3n-dnv, 2n-dnv, 3n-tsh.
+
+Latency by percentile distribution plots are used to show packet latency
+percentiles at different packet rate load levels: i) No-Load latency
+streams only, ii) Low-Load at 10% PDR, iii) Mid-Load at 50% PDR and iv)
+High-Load at 90% PDR.
+
+Additional information about graph data:
+
+#. **Graph Title**: describes tested DUT packet path.
+
+#. **X-axis Labels**: percentile of packets.
+
+#. **Y-axis Labels**: measured one-way packet latency values in [uSec].
+
+#. **Graph Legend**: list of latency tests at different packet rate load
+ level.
+
+#. **Hover Information**: packet rate load level, stream direction
+ (East-West, West-East), percentile, one-way latency.
.. note::
Test results have been generated by
- `FD.io test executor vpp performance job 2n-skx`_,
- `FD.io test executor vpp performance job 3n-skx`_,
- `FD.io test executor vpp performance job 2n-clx`_,
`FD.io test executor vpp performance job 3n-hsw`_ and
`FD.io test executor vpp performance job 3n-tsh`_ with RF
result files csit-vpp-perf-|srelease|-\*.zip
IPv4 Routing
============
-.. todo::
- Introduction
-
CSIT source code for the test cases used for plots can be found in
`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4?h=rls2001>`_.
IPv4 Tunnels
============
-.. todo::
- Introduction
-
CSIT source code for the test cases used for plots can be found in
`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4_tunnels?h=rls2001>`_.
IPv6 Routing
============
-.. todo::
- Introduction
-
CSIT source code for the test cases used for plots can be found in
`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6?h=rls2001>`_.
IPSec IPv4 Routing
==================
-.. todo::
- Introduction
-
CSIT source code for the test cases used for plots can be found in
`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls2001>`_.
L2 Ethernet Switching
=====================
-.. todo::
- Introduction
-
CSIT source code for the test cases used for plots can be found in
`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls2001>`_.
SRv6 Routing
============
-.. todo::
- Introduction
-
CSIT source code for the test cases used for plots can be found in
`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/srv6?h=rls2001>`_.
KVM VMs vhost-user
==================
-.. todo::
- Introduction
-
CSIT source code for the test cases used for plots can be found in
`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls2001>`_.
Code Review / csit.git / commitdiff