CSIT-458 Use node aware config in all perf TCs

- Use node aware config in all perf TCs

Change-Id: Icbf92bf232efef49d07c1324c64ae55125e90fb2
Signed-off-by: pmikus <pmikus@cisco.com>

diff --git a/resources/libraries/robot/default.robot b/resources/libraries/robot/default.robot
index 238749a..8602f70 100644 (file)
--- a/resources/libraries/robot/default.robot
+++ b/resources/libraries/robot/default.robot
@@ -81,30 +81,6 @@
 | | Add rxqueues config | ${dut1} | ${rxqueues}
 | | Add rxqueues config | ${dut2} | ${rxqueues}
 
 | | Add rxqueues config | ${dut1} | ${rxqueues}
 | | Add rxqueues config | ${dut2} | ${rxqueues}
 

-| Add '${m}' worker threads and rxqueues '${n}' without HTT to all DUTs
-| | [Documentation] |  Setup M worker threads without HTT and rxqueues N in
-| | ...             |  startup configuration of VPP to all DUTs
-| | ${cpu}= | Catenate | main-core | 0 | corelist-workers
-| | ${cpu}= | Run Keyword If | '${m}' == '1' | Catenate | ${cpu} | 1
-| | ...     | ELSE IF        | '${m}' == '2' | Catenate | ${cpu} | 1-2
-| | ...     | ELSE IF        | '${m}' == '4' | Catenate | ${cpu} | 1-4
-| | ...     | ELSE IF        | '${m}' == '6' | Catenate | ${cpu} | 1-6
-| | ...     | ELSE           | Fail | Not supported combination
-| | ${rxqueues}= | Catenate | num-rx-queues | ${n}
-| | Add worker threads and rxqueues to all DUTs | ${cpu} | ${rxqueues}
-
-| Add '${m}' worker threads and rxqueues '${n}' with HTT to all DUTs
-| | [Documentation] |  Setup M worker threads with HTT and rxqueues N in
-| | ...             |  startup configuration of VPP to all DUTs
-| | ${cpu}= | Catenate | main-core | 0 | corelist-workers
-| | ${cpu}= | Run Keyword If | '${m}' == '2' | Catenate | ${cpu} | 1,10
-| | ...     | ELSE IF        | '${m}' == '4' | Catenate | ${cpu} | 1-2,10-11
-| | ...     | ELSE IF        | '${m}' == '6' | Catenate | ${cpu} | 1-3,10-12
-| | ...     | ELSE IF        | '${m}' == '8' | Catenate | ${cpu} | 1-4,10-13
-| | ...     | ELSE           | Fail | Not supported combination
-| | ${rxqueues}= | Catenate | num-rx-queues | ${n}
-| | Add worker threads and rxqueues to all DUTs | ${cpu} | ${rxqueues}
-

 | Add worker threads and rxqueues to all DUTs
 | | [Documentation] | Setup worker threads and rxqueues in VPP startup
 | | ...             | configuration to all DUTs
 | Add worker threads and rxqueues to all DUTs
 | | [Documentation] | Setup worker threads and rxqueues in VPP startup
 | | ...             | configuration to all DUTs


@@ -186,7 +162,7 @@
 | Setup default startup configuration of VPP on all DUTs
 | | [Documentation] | Setup default startup configuration of VPP to all DUTs
 | | Remove startup configuration of VPP from all DUTs
 | Setup default startup configuration of VPP on all DUTs
 | | [Documentation] | Setup default startup configuration of VPP to all DUTs
 | | Remove startup configuration of VPP from all DUTs

-| | Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | Add all PCI devices to all DUTs
 | | Apply startup configuration on all VPP DUTs
 
 | | Add all PCI devices to all DUTs
 | | Apply startup configuration on all VPP DUTs
 

diff --git a/resources/libraries/robot/performance.robot b/resources/libraries/robot/performance.robot
index 2c235dd..f7cd96a 100644 (file)
--- a/resources/libraries/robot/performance.robot
+++ b/resources/libraries/robot/performance.robot
@@ -676,11 +676,11 @@
 | | ...
 | | ... | \| 2-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \|
 | | [Arguments] | ${topology_type} | ${nic_model}
 | | ...
 | | ... | \| 2-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \|
 | | [Arguments] | ${topology_type} | ${nic_model}

-| | Setup default startup configuration of VPP on all DUTs

 | | Show vpp version on all DUTs
 | | Setup performance global Variables
 | | 2-node circular Topology Variables Setup with DUT interface model
 | | ... | ${nic_model}
 | | Show vpp version on all DUTs
 | | Setup performance global Variables
 | | 2-node circular Topology Variables Setup with DUT interface model
 | | ... | ${nic_model}

+| | Setup default startup configuration of VPP on all DUTs

 | | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
 | | ...                          | ${dut1} | ${dut1_if1}
 | | ...                          | ${dut1} | ${dut1_if2}
 | | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
 | | ...                          | ${dut1} | ${dut1_if1}
 | | ...                          | ${dut1} | ${dut1_if2}


@@ -701,11 +701,11 @@
 | | ...
 | | ... | \| 3-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \|
 | | [Arguments] | ${topology_type} | ${nic_model}
 | | ...
 | | ... | \| 3-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \|
 | | [Arguments] | ${topology_type} | ${nic_model}

-| | Setup default startup configuration of VPP on all DUTs

 | | Show vpp version on all DUTs
 | | Setup performance global Variables
 | | 3-node circular Topology Variables Setup with DUT interface model
 | | ... | ${nic_model}
 | | Show vpp version on all DUTs
 | | Setup performance global Variables
 | | 3-node circular Topology Variables Setup with DUT interface model
 | | ... | ${nic_model}

+| | Setup default startup configuration of VPP on all DUTs

 | | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
 | | ...                          | ${dut1} | ${dut1_if1}
 | | ...                          | ${dut2} | ${dut2_if2}
 | | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
 | | ...                          | ${dut1} | ${dut1_if1}
 | | ...                          | ${dut2} | ${dut2_if2}

diff --git a/tests/perf/Long_Bridge_Domain_Vhost_Intel-X520-DA2.robot b/tests/perf/Long_Bridge_Domain_Vhost_Intel-X520-DA2.robot
index cc1b578..1019152 100644 (file)
--- a/tests/perf/Long_Bridge_Domain_Vhost_Intel-X520-DA2.robot
+++ b/tests/perf/Long_Bridge_Domain_Vhost_Intel-X520-DA2.robot
@@ -83,7 +83,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -114,7 +114,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -147,7 +147,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -178,7 +178,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -212,7 +212,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -244,7 +244,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  L2 bridge domains with Vhost-User initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  L2 bridge domains with Vhost-User initialized in a 3-node circular topology


@@ -276,7 +276,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -307,7 +307,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -340,7 +340,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -371,7 +371,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -405,7 +405,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -437,7 +437,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -470,7 +470,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -501,7 +501,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -534,7 +534,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -565,7 +565,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -599,7 +599,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -631,7 +631,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs

diff --git a/tests/perf/Long_IPv4_Cop_Intel-X520-DA2.robot b/tests/perf/Long_IPv4_Cop_Intel-X520-DA2.robot
index 868e708..1f66141 100644 (file)
--- a/tests/perf/Long_IPv4_Cop_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv4_Cop_Intel-X520-DA2.robot
@@ -70,7 +70,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -99,7 +99,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -130,7 +130,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -159,7 +159,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -190,7 +190,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology


@@ -218,7 +218,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology


@@ -248,7 +248,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -277,7 +277,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -308,7 +308,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -337,7 +337,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -368,7 +368,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology


@@ -396,7 +396,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology


@@ -426,7 +426,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -455,7 +455,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -486,7 +486,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -515,7 +515,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -546,7 +546,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology


@@ -574,7 +574,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Long_IPv4_Fib_200k_Intel-X520-DA2.robot b/tests/perf/Long_IPv4_Fib_200k_Intel-X520-DA2.robot
index 4f6b8c7..920321b 100644 (file)
--- a/tests/perf/Long_IPv4_Fib_200k_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv4_Fib_200k_Intel-X520-DA2.robot
@@ -66,7 +66,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -90,7 +90,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -116,7 +116,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -140,7 +140,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -166,7 +166,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology


@@ -189,7 +189,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology


@@ -214,7 +214,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -238,7 +238,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -264,7 +264,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -288,7 +288,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -314,7 +314,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology


@@ -337,7 +337,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology


@@ -362,7 +362,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -386,7 +386,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -412,7 +412,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -436,7 +436,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -462,7 +462,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology


@@ -485,7 +485,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Long_IPv4_Fib_20k_Intel-X520-DA2.robot b/tests/perf/Long_IPv4_Fib_20k_Intel-X520-DA2.robot
index 926cd1e..de1999b 100644 (file)
--- a/tests/perf/Long_IPv4_Fib_20k_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv4_Fib_20k_Intel-X520-DA2.robot
@@ -66,7 +66,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -90,7 +90,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -116,7 +116,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -140,7 +140,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -166,7 +166,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology


@@ -189,7 +189,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology


@@ -214,7 +214,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -238,7 +238,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -264,7 +264,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -288,7 +288,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -314,7 +314,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology


@@ -337,7 +337,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology


@@ -362,7 +362,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -386,7 +386,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -412,7 +412,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -436,7 +436,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -462,7 +462,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology


@@ -485,7 +485,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Long_IPv4_Fib_2M_Intel-X520-DA2.robot b/tests/perf/Long_IPv4_Fib_2M_Intel-X520-DA2.robot
index 5a04275..fa9b1bd 100644 (file)
--- a/tests/perf/Long_IPv4_Fib_2M_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv4_Fib_2M_Intel-X520-DA2.robot
@@ -66,7 +66,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G


@@ -91,7 +91,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G


@@ -118,7 +118,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G


@@ -143,7 +143,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G


@@ -170,7 +170,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Apply startup configuration on all VPP DUTs


@@ -194,7 +194,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Apply startup configuration on all VPP DUTs


@@ -220,7 +220,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G


@@ -245,7 +245,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G


@@ -272,7 +272,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G


@@ -297,7 +297,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G


@@ -324,7 +324,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Apply startup configuration on all VPP DUTs


@@ -348,7 +348,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Apply startup configuration on all VPP DUTs


@@ -374,7 +374,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G


@@ -399,7 +399,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G


@@ -426,7 +426,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G


@@ -451,7 +451,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G


@@ -478,7 +478,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Apply startup configuration on all VPP DUTs


@@ -502,7 +502,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Apply startup configuration on all VPP DUTs

diff --git a/tests/perf/Long_IPv4_Intel-X520-DA2.robot b/tests/perf/Long_IPv4_Intel-X520-DA2.robot
index 3a079cc..b9f68c5 100644 (file)
--- a/tests/perf/Long_IPv4_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv4_Intel-X520-DA2.robot
@@ -70,7 +70,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -92,7 +92,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -116,7 +116,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -138,7 +138,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -162,7 +162,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology


@@ -183,7 +183,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology


@@ -206,7 +206,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -228,7 +228,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -252,7 +252,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -274,7 +274,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -298,7 +298,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology


@@ -319,7 +319,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology


@@ -342,7 +342,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -364,7 +364,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -388,7 +388,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -410,7 +410,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -434,7 +434,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology


@@ -455,7 +455,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology


@@ -479,7 +479,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add all PCI devices to all DUTs
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add all PCI devices to all DUTs
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -502,7 +502,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add all PCI devices to all DUTs
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add all PCI devices to all DUTs
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs

diff --git a/tests/perf/Long_IPv4_Policer_Intel-X520-DA2.robot b/tests/perf/Long_IPv4_Policer_Intel-X520-DA2.robot
index f8a15a9..d691bf9 100644 (file)
--- a/tests/perf/Long_IPv4_Policer_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv4_Policer_Intel-X520-DA2.robot
@@ -74,7 +74,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -100,7 +100,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -127,7 +127,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -153,7 +153,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -180,7 +180,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology


@@ -205,7 +205,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology


@@ -232,7 +232,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -258,7 +258,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -285,7 +285,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -311,7 +311,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -338,7 +338,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology


@@ -363,7 +363,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology


@@ -389,7 +389,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -415,7 +415,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -442,7 +442,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -468,7 +468,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -495,7 +495,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology


@@ -520,7 +520,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Long_IPv4_Vhost_Intel-X520-DA2.robot b/tests/perf/Long_IPv4_Vhost_Intel-X520-DA2.robot
index 828139f..a492cae 100644 (file)
--- a/tests/perf/Long_IPv4_Vhost_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv4_Vhost_Intel-X520-DA2.robot
@@ -82,7 +82,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -115,7 +115,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -150,7 +150,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -183,7 +183,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -219,7 +219,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -253,7 +253,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding with Vhost initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding with Vhost initialized in a 3-node circular topology


@@ -287,7 +287,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -320,7 +320,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -355,7 +355,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -388,7 +388,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -424,7 +424,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -458,7 +458,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -493,7 +493,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -526,7 +526,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -561,7 +561,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -594,7 +594,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -630,7 +630,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -664,7 +664,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs

diff --git a/tests/perf/Long_IPv4_iAcl_Intel-X520-DA2.robot b/tests/perf/Long_IPv4_iAcl_Intel-X520-DA2.robot
index 1b4d146..d5e9877 100644 (file)
--- a/tests/perf/Long_IPv4_iAcl_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv4_iAcl_Intel-X520-DA2.robot
@@ -70,7 +70,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -107,7 +107,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -146,7 +146,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -183,7 +183,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -222,7 +222,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology


@@ -258,7 +258,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology


@@ -296,7 +296,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -333,7 +333,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -372,7 +372,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -409,7 +409,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -448,7 +448,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology


@@ -484,7 +484,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology


@@ -522,7 +522,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -559,7 +559,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -598,7 +598,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -635,7 +635,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -674,7 +674,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology


@@ -710,7 +710,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Long_IPv6_Cop_Intel-X520-DA2.robot b/tests/perf/Long_IPv6_Cop_Intel-X520-DA2.robot
index 37f853f..d7eee8a 100644 (file)
--- a/tests/perf/Long_IPv6_Cop_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv6_Cop_Intel-X520-DA2.robot
@@ -68,7 +68,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -97,7 +97,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -128,7 +128,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -157,7 +157,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -188,7 +188,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv6 forwarding initialized in a 3-node circular topology


@@ -216,7 +216,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv6 forwarding initialized in a 3-node circular topology


@@ -246,7 +246,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -275,7 +275,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -306,7 +306,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -335,7 +335,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -366,7 +366,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv6 forwarding initialized in a 3-node circular topology


@@ -394,7 +394,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv6 forwarding initialized in a 3-node circular topology


@@ -424,7 +424,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -453,7 +453,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -484,7 +484,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -513,7 +513,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -544,7 +544,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv6 forwarding initialized in a 3-node circular topology


@@ -572,7 +572,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv6 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Long_IPv6_Fib_200k_Intel-X520-DA2.robot b/tests/perf/Long_IPv6_Fib_200k_Intel-X520-DA2.robot
index 3e75c9e..82f5ad0 100644 (file)
--- a/tests/perf/Long_IPv6_Fib_200k_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv6_Fib_200k_Intel-X520-DA2.robot
@@ -66,7 +66,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -90,7 +90,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -116,7 +116,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -140,7 +140,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -166,7 +166,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology


@@ -189,7 +189,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology


@@ -214,7 +214,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -238,7 +238,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -264,7 +264,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -288,7 +288,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -314,7 +314,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology


@@ -337,7 +337,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology


@@ -362,7 +362,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -386,7 +386,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -412,7 +412,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -436,7 +436,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -462,7 +462,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology


@@ -485,7 +485,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Long_IPv6_Fib_20k_Intel-X520-DA2.robot b/tests/perf/Long_IPv6_Fib_20k_Intel-X520-DA2.robot
index 53399d8..f779650 100644 (file)
--- a/tests/perf/Long_IPv6_Fib_20k_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv6_Fib_20k_Intel-X520-DA2.robot
@@ -66,7 +66,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -90,7 +90,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -116,7 +116,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -140,7 +140,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -166,7 +166,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology


@@ -189,7 +189,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology


@@ -214,7 +214,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -238,7 +238,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -264,7 +264,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -288,7 +288,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -314,7 +314,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology


@@ -337,7 +337,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology


@@ -362,7 +362,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -386,7 +386,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -412,7 +412,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -436,7 +436,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -462,7 +462,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology


@@ -485,7 +485,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Long_IPv6_Fib_2M_Intel-X520-DA2.robot b/tests/perf/Long_IPv6_Fib_2M_Intel-X520-DA2.robot
index d7a7676..c9619fe 100644 (file)
--- a/tests/perf/Long_IPv6_Fib_2M_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv6_Fib_2M_Intel-X520-DA2.robot
@@ -66,7 +66,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -90,7 +90,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -116,7 +116,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -140,7 +140,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -166,7 +166,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology


@@ -189,7 +189,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology


@@ -214,7 +214,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -238,7 +238,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -264,7 +264,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -288,7 +288,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -314,7 +314,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology


@@ -337,7 +337,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology


@@ -362,7 +362,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -386,7 +386,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -412,7 +412,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -436,7 +436,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -462,7 +462,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology


@@ -485,7 +485,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Long_IPv6_Intel-X520-DA2.robot b/tests/perf/Long_IPv6_Intel-X520-DA2.robot
index 648d836..62a5204 100644 (file)
--- a/tests/perf/Long_IPv6_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv6_Intel-X520-DA2.robot
@@ -64,7 +64,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -86,7 +86,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -110,7 +110,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -132,7 +132,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -156,7 +156,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology


@@ -177,7 +177,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology


@@ -200,7 +200,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -222,7 +222,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -246,7 +246,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -268,7 +268,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -292,7 +292,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology


@@ -313,7 +313,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology


@@ -336,7 +336,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -358,7 +358,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -382,7 +382,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -404,7 +404,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -428,7 +428,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology


@@ -449,7 +449,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Long_IPv6_Intel-XL710.robot b/tests/perf/Long_IPv6_Intel-XL710.robot
index d8c8de1..260f701 100644 (file)
--- a/tests/perf/Long_IPv6_Intel-XL710.robot
+++ b/tests/perf/Long_IPv6_Intel-XL710.robot
@@ -66,7 +66,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -88,7 +88,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -110,7 +110,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -132,7 +132,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -154,7 +154,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -176,7 +176,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs

diff --git a/tests/perf/Long_IPv6_iAcl_Intel-X520-DA2.robot b/tests/perf/Long_IPv6_iAcl_Intel-X520-DA2.robot
index 32222d2..790d03c 100644 (file)
--- a/tests/perf/Long_IPv6_iAcl_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv6_iAcl_Intel-X520-DA2.robot
@@ -67,7 +67,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -91,7 +91,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -117,7 +117,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -141,7 +141,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -167,7 +167,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology


@@ -190,7 +190,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology


@@ -215,7 +215,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -239,7 +239,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -265,7 +265,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -289,7 +289,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -315,7 +315,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology


@@ -338,7 +338,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology


@@ -363,7 +363,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -387,7 +387,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -413,7 +413,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -437,7 +437,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -463,7 +463,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology


@@ -486,7 +486,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Long_Lisp_Intel-X520-DA2.robot b/tests/perf/Long_Lisp_Intel-X520-DA2.robot
index 5235160..8938e21 100644 (file)
--- a/tests/perf/Long_Lisp_Intel-X520-DA2.robot
+++ b/tests/perf/Long_Lisp_Intel-X520-DA2.robot
@@ -73,7 +73,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -105,7 +105,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -138,7 +138,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -169,7 +169,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -202,7 +202,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 forwarding initialized in a 3-node circular topology


@@ -233,7 +233,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 forwarding initialized in a 3-node circular topology


@@ -265,7 +265,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -297,7 +297,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -331,7 +331,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -363,7 +363,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -397,7 +397,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 forwarding initialized in a 3-node circular topology


@@ -428,7 +428,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 forwarding initialized in a 3-node circular topology


@@ -460,7 +460,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -492,7 +492,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -526,7 +526,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -558,7 +558,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -592,7 +592,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 forwarding initialized in a 3-node circular topology


@@ -623,7 +623,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 forwarding initialized in a 3-node circular topology


@@ -655,7 +655,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -687,7 +687,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -720,7 +720,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -752,7 +752,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -785,7 +785,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 forwarding initialized in a 3-node circular topology


@@ -816,7 +816,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 forwarding initialized in a 3-node circular topology


@@ -848,7 +848,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -880,7 +880,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -914,7 +914,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -946,7 +946,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -980,7 +980,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 forwarding initialized in a 3-node circular topology


@@ -1011,7 +1011,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 forwarding initialized in a 3-node circular topology


@@ -1043,7 +1043,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -1075,7 +1075,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -1109,7 +1109,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -1141,7 +1141,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -1175,7 +1175,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 forwarding initialized in a 3-node circular topology


@@ -1206,7 +1206,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 forwarding initialized in a 3-node circular topology


@@ -1238,7 +1238,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -1270,7 +1270,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -1303,7 +1303,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -1335,7 +1335,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -1368,7 +1368,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology


@@ -1399,7 +1399,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology


@@ -1431,7 +1431,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -1463,7 +1463,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -1497,7 +1497,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -1529,7 +1529,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -1563,7 +1563,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology


@@ -1594,7 +1594,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology


@@ -1626,7 +1626,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -1658,7 +1658,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -1692,7 +1692,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -1724,7 +1724,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -1758,7 +1758,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology


@@ -1789,7 +1789,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology


@@ -1821,7 +1821,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -1853,7 +1853,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -1886,7 +1886,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -1918,7 +1918,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -1951,7 +1951,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology


@@ -1982,7 +1982,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology


@@ -2014,7 +2014,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -2046,7 +2046,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -2080,7 +2080,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -2112,7 +2112,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -2146,7 +2146,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology


@@ -2177,7 +2177,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology


@@ -2209,7 +2209,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -2241,7 +2241,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -2275,7 +2275,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -2307,7 +2307,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -2341,7 +2341,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology


@@ -2372,7 +2372,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Long_Xconnect_Dot1ad_Intel-X520-DA2.robot b/tests/perf/Long_Xconnect_Dot1ad_Intel-X520-DA2.robot
index 2a0e8b6..f289c32 100644 (file)
--- a/tests/perf/Long_Xconnect_Dot1ad_Intel-X520-DA2.robot
+++ b/tests/perf/Long_Xconnect_Dot1ad_Intel-X520-DA2.robot
@@ -72,7 +72,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -103,7 +103,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -136,7 +136,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -167,7 +167,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -200,7 +200,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology


@@ -230,7 +230,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology


@@ -262,7 +262,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -293,7 +293,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -326,7 +326,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -357,7 +357,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -390,7 +390,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology


@@ -420,7 +420,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology


@@ -452,7 +452,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -483,7 +483,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -516,7 +516,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -547,7 +547,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -580,7 +580,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology


@@ -610,7 +610,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology

diff --git a/tests/perf/Long_Xconnect_Dot1q_Intel-X520-DA2.robot b/tests/perf/Long_Xconnect_Dot1q_Intel-X520-DA2.robot
index 64f6c65..2bb435d 100644 (file)
--- a/tests/perf/Long_Xconnect_Dot1q_Intel-X520-DA2.robot
+++ b/tests/perf/Long_Xconnect_Dot1q_Intel-X520-DA2.robot
@@ -68,7 +68,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -98,7 +98,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -130,7 +130,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -160,7 +160,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -192,7 +192,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology


@@ -221,7 +221,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology


@@ -252,7 +252,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -282,7 +282,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -314,7 +314,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -344,7 +344,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -376,7 +376,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology


@@ -405,7 +405,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology


@@ -436,7 +436,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -466,7 +466,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -498,7 +498,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -528,7 +528,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -560,7 +560,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology


@@ -589,7 +589,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology

diff --git a/tests/perf/Long_Xconnect_Intel-X520-DA2.robot b/tests/perf/Long_Xconnect_Intel-X520-DA2.robot
index 7f630c5..6a45286 100644 (file)
--- a/tests/perf/Long_Xconnect_Intel-X520-DA2.robot
+++ b/tests/perf/Long_Xconnect_Intel-X520-DA2.robot
@@ -66,7 +66,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -88,7 +88,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -112,7 +112,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -134,7 +134,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -158,7 +158,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect initialized in a 3-node circular topology


@@ -179,7 +179,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect initialized in a 3-node circular topology


@@ -202,7 +202,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -224,7 +224,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -248,7 +248,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -270,7 +270,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -294,7 +294,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect initialized in a 3-node circular topology


@@ -315,7 +315,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect initialized in a 3-node circular topology


@@ -338,7 +338,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -360,7 +360,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -384,7 +384,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -406,7 +406,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -430,7 +430,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect initialized in a 3-node circular topology


@@ -451,7 +451,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect initialized in a 3-node circular topology


@@ -475,7 +475,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add all PCI devices to all DUTs
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add all PCI devices to all DUTs
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -498,7 +498,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add all PCI devices to all DUTs
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add all PCI devices to all DUTs
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs

diff --git a/tests/perf/Long_Xconnect_Vhost_Intel-X520-DA2.robot b/tests/perf/Long_Xconnect_Vhost_Intel-X520-DA2.robot
index c2d43b3..6c98969 100644 (file)
--- a/tests/perf/Long_Xconnect_Vhost_Intel-X520-DA2.robot
+++ b/tests/perf/Long_Xconnect_Vhost_Intel-X520-DA2.robot
@@ -81,7 +81,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -112,7 +112,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -145,7 +145,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -176,7 +176,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -210,7 +210,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -242,7 +242,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -275,7 +275,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -306,7 +306,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -339,7 +339,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -370,7 +370,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -404,7 +404,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -436,7 +436,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -469,7 +469,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -500,7 +500,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -533,7 +533,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -564,7 +564,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -598,7 +598,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -630,7 +630,7 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs

diff --git a/tests/perf/Long_Xconnect_Vxlan_Ipv4_Intel-X520-DA2.robot b/tests/perf/Long_Xconnect_Vxlan_Ipv4_Intel-X520-DA2.robot
index 958ca3b..cb74e0d 100644 (file)
--- a/tests/perf/Long_Xconnect_Vxlan_Ipv4_Intel-X520-DA2.robot
+++ b/tests/perf/Long_Xconnect_Vxlan_Ipv4_Intel-X520-DA2.robot
@@ -66,7 +66,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -88,7 +88,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -112,7 +112,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology


@@ -133,7 +133,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology


@@ -156,7 +156,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology


@@ -177,7 +177,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology


@@ -200,7 +200,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -222,7 +222,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -246,7 +246,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology


@@ -267,7 +267,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology


@@ -290,7 +290,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology


@@ -311,7 +311,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology


@@ -334,7 +334,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -356,7 +356,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -380,7 +380,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology


@@ -401,7 +401,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology


@@ -424,7 +424,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology


@@ -445,7 +445,7 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology

diff --git a/tests/perf/Short_Bridge_Domain_Intel-X520-DA2.robot b/tests/perf/Short_Bridge_Domain_Intel-X520-DA2.robot
index 62012bd..5bde927 100644 (file)
--- a/tests/perf/Short_Bridge_Domain_Intel-X520-DA2.robot
+++ b/tests/perf/Short_Bridge_Domain_Intel-X520-DA2.robot
@@ -52,7 +52,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.2mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.2mpps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -69,7 +69,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -86,7 +86,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 bridge domain initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 bridge domain initialized in a 3-node circular topology


@@ -102,7 +102,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 6.9mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 6.9mpps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -119,7 +119,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -136,7 +136,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 bridge domain initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 bridge domain initialized in a 3-node circular topology


@@ -152,7 +152,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 7.4mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 7.4mpps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -169,7 +169,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -186,7 +186,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 bridge domain initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 bridge domain initialized in a 3-node circular topology

diff --git a/tests/perf/Short_IPv4_Cop_Intel-X520-DA2.robot b/tests/perf/Short_IPv4_Cop_Intel-X520-DA2.robot
index a186782..462b119 100644 (file)
--- a/tests/perf/Short_IPv4_Cop_Intel-X520-DA2.robot
+++ b/tests/perf/Short_IPv4_Cop_Intel-X520-DA2.robot
@@ -55,7 +55,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.5mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.5mpps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -78,7 +78,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -101,7 +101,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology


@@ -123,7 +123,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 6.6mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 6.6mpps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -146,7 +146,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -169,7 +169,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology


@@ -191,7 +191,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 10.0mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 10.0mpps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -214,7 +214,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -237,7 +237,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Short_IPv4_Fib_200k_Intel-X520-DA2.robot b/tests/perf/Short_IPv4_Fib_200k_Intel-X520-DA2.robot
index f9fa2c7..1644676 100644 (file)
--- a/tests/perf/Short_IPv4_Fib_200k_Intel-X520-DA2.robot
+++ b/tests/perf/Short_IPv4_Fib_200k_Intel-X520-DA2.robot
@@ -53,7 +53,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.5mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.5mpps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -72,7 +72,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -91,7 +91,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology


@@ -109,7 +109,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 7.5mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 7.5mpps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -128,7 +128,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -147,7 +147,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology


@@ -165,7 +165,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 10.0mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 10.0mpps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -184,7 +184,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -203,7 +203,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Short_IPv4_Fib_20k_Intel-X520-DA2.robot b/tests/perf/Short_IPv4_Fib_20k_Intel-X520-DA2.robot
index 7f55b24..877d88b 100644 (file)
--- a/tests/perf/Short_IPv4_Fib_20k_Intel-X520-DA2.robot
+++ b/tests/perf/Short_IPv4_Fib_20k_Intel-X520-DA2.robot
@@ -53,7 +53,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.5mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.5mpps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -72,7 +72,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -91,7 +91,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology


@@ -109,7 +109,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 7.5mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 7.5mpps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -128,7 +128,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -147,7 +147,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology


@@ -165,7 +165,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 10.0mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 10.0mpps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -184,7 +184,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -203,7 +203,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv4 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Short_IPv4_Fib_2M_Intel-X520-DA2.robot b/tests/perf/Short_IPv4_Fib_2M_Intel-X520-DA2.robot
index aaf94d5..fc37173 100644 (file)
--- a/tests/perf/Short_IPv4_Fib_2M_Intel-X520-DA2.robot
+++ b/tests/perf/Short_IPv4_Fib_2M_Intel-X520-DA2.robot
@@ -53,7 +53,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.5mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.5mpps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G


@@ -73,7 +73,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G


@@ -93,7 +93,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Apply startup configuration on all VPP DUTs


@@ -112,7 +112,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 7.5mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 7.5mpps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G


@@ -132,7 +132,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G


@@ -152,7 +152,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Apply startup configuration on all VPP DUTs


@@ -171,7 +171,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 10.0mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 10.0mpps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G


@@ -191,7 +191,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Add Heapsize Config to all DUTs | 3G


@@ -211,7 +211,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add Heapsize Config to all DUTs | 3G
 | | And   Apply startup configuration on all VPP DUTs

diff --git a/tests/perf/Short_IPv4_Intel-X520-DA2.robot b/tests/perf/Short_IPv4_Intel-X520-DA2.robot
index e072af9..8f47bca 100644 (file)
--- a/tests/perf/Short_IPv4_Intel-X520-DA2.robot
+++ b/tests/perf/Short_IPv4_Intel-X520-DA2.robot
@@ -56,7 +56,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.5mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.5mpps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -73,7 +73,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -90,7 +90,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology


@@ -106,7 +106,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 7.5mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 7.5mpps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -123,7 +123,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -140,7 +140,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology


@@ -156,7 +156,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 10.0mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 10.0mpps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -173,7 +173,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -190,7 +190,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Short_IPv4_Policer_Intel-X520-DA2.robot b/tests/perf/Short_IPv4_Policer_Intel-X520-DA2.robot
index 2592b06..125b1e6 100644 (file)
--- a/tests/perf/Short_IPv4_Policer_Intel-X520-DA2.robot
+++ b/tests/perf/Short_IPv4_Policer_Intel-X520-DA2.robot
@@ -61,7 +61,7 @@
 | | ${rate}= | Set Variable | 3.1mpps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${rate}= | Set Variable | 3.1mpps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -81,7 +81,7 @@
 | | ${rate}= | Set Variable | 812743pps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${rate}= | Set Variable | 812743pps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -101,7 +101,7 @@
 | | ${rate}= | Set Variable | 138580pps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${rate}= | Set Variable | 138580pps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology


@@ -120,7 +120,7 @@
 | | ${rate}= | Set Variable | 5.6mpps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${rate}= | Set Variable | 5.6mpps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -140,7 +140,7 @@
 | | ${rate}= | Set Variable | 812743pps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${rate}= | Set Variable | 812743pps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -160,7 +160,7 @@
 | | ${rate}= | Set Variable | 138580pps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${rate}= | Set Variable | 138580pps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology


@@ -179,7 +179,7 @@
 | | ${rate}= | Set Variable | 8.9mpps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${rate}= | Set Variable | 8.9mpps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -199,7 +199,7 @@
 | | ${rate}= | Set Variable | 812743pps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${rate}= | Set Variable | 812743pps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -219,7 +219,7 @@
 | | ${rate}= | Set Variable | 138580pps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
 | | ${rate}= | Set Variable | 138580pps
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv4 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Short_IPv4_iAcl_Intel-X520-DA2.robot b/tests/perf/Short_IPv4_iAcl_Intel-X520-DA2.robot
index ddce710..d0836bb 100644 (file)
--- a/tests/perf/Short_IPv4_iAcl_Intel-X520-DA2.robot
+++ b/tests/perf/Short_IPv4_iAcl_Intel-X520-DA2.robot
@@ -55,7 +55,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.1mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.1mpps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -86,7 +86,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -117,7 +117,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology


@@ -147,7 +147,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 5.8mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 5.8mpps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -178,7 +178,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -209,7 +209,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology


@@ -239,7 +239,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 7.8mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 7.8mpps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -270,7 +270,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -301,7 +301,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Short_IPv6_Cop_Intel-X520-DA2.robot b/tests/perf/Short_IPv6_Cop_Intel-X520-DA2.robot
index 2b81ed4..7494e4f 100644 (file)
--- a/tests/perf/Short_IPv6_Cop_Intel-X520-DA2.robot
+++ b/tests/perf/Short_IPv6_Cop_Intel-X520-DA2.robot
@@ -53,7 +53,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 2.8mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 2.8mpps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -76,7 +76,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -99,7 +99,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv6 forwarding initialized in a 3-node circular topology


@@ -121,7 +121,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 4.9mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 4.9mpps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -144,7 +144,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -167,7 +167,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv6 forwarding initialized in a 3-node circular topology


@@ -189,7 +189,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 10.1mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 10.1mpps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -212,7 +212,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -235,7 +235,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv6 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Short_IPv6_Fib_200k_Intel-X520-DA2.robot b/tests/perf/Short_IPv6_Fib_200k_Intel-X520-DA2.robot
index 560fcec..8e391ab 100644 (file)
--- a/tests/perf/Short_IPv6_Fib_200k_Intel-X520-DA2.robot
+++ b/tests/perf/Short_IPv6_Fib_200k_Intel-X520-DA2.robot
@@ -53,7 +53,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 2.9mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 2.9mpps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -72,7 +72,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -91,7 +91,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology


@@ -109,7 +109,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 5.9mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 5.9mpps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -128,7 +128,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -147,7 +147,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology


@@ -165,7 +165,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 10.3mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 10.3mpps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -184,7 +184,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -203,7 +203,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Short_IPv6_Fib_20k_Intel-X520-DA2.robot b/tests/perf/Short_IPv6_Fib_20k_Intel-X520-DA2.robot
index 804f81c..925c1b2 100644 (file)
--- a/tests/perf/Short_IPv6_Fib_20k_Intel-X520-DA2.robot
+++ b/tests/perf/Short_IPv6_Fib_20k_Intel-X520-DA2.robot
@@ -53,7 +53,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 2.9mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 2.9mpps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -72,7 +72,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -91,7 +91,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology


@@ -109,7 +109,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 5.9mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 5.9mpps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -128,7 +128,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -147,7 +147,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology


@@ -165,7 +165,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 10.0mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 10.0mpps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -184,7 +184,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -203,7 +203,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Short_IPv6_Fib_2M_Intel-X520-DA2.robot b/tests/perf/Short_IPv6_Fib_2M_Intel-X520-DA2.robot
index 15e58f9..bf11df9 100644 (file)
--- a/tests/perf/Short_IPv6_Fib_2M_Intel-X520-DA2.robot
+++ b/tests/perf/Short_IPv6_Fib_2M_Intel-X520-DA2.robot
@@ -53,7 +53,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 2.3mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 2.3mpps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -72,7 +72,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -91,7 +91,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology


@@ -109,7 +109,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 4.9mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 4.9mpps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -128,7 +128,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -147,7 +147,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology


@@ -165,7 +165,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 9.5mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 9.5mpps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -184,7 +184,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -203,7 +203,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Scale IPv6 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Short_IPv6_Intel-X520-DA2.robot b/tests/perf/Short_IPv6_Intel-X520-DA2.robot
index 3ee92fb..62442c7 100644 (file)
--- a/tests/perf/Short_IPv6_Intel-X520-DA2.robot
+++ b/tests/perf/Short_IPv6_Intel-X520-DA2.robot
@@ -52,7 +52,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 2.9mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 2.9mpps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -69,7 +69,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -86,7 +86,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology


@@ -102,7 +102,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 5.9mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 5.9mpps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -119,7 +119,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -136,7 +136,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology


@@ -152,7 +152,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 7.3mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 7.3mpps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -169,7 +169,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -186,7 +186,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Short_IPv6_iAcl_Intel-X520-DA2.robot b/tests/perf/Short_IPv6_iAcl_Intel-X520-DA2.robot
index fa9ea4e..5d1a4e2 100644 (file)
--- a/tests/perf/Short_IPv6_iAcl_Intel-X520-DA2.robot
+++ b/tests/perf/Short_IPv6_iAcl_Intel-X520-DA2.robot
@@ -53,7 +53,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 2.9mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 2.9mpps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -71,7 +71,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -89,7 +89,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology


@@ -106,7 +106,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 5.4mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 5.4mpps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -124,7 +124,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -142,7 +142,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology


@@ -159,7 +159,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 9.5mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 9.5mpps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -177,7 +177,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -195,7 +195,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   IPv6 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Short_Lisp_Intel-X520-DA2.robot b/tests/perf/Short_Lisp_Intel-X520-DA2.robot
index 6ecfe59..cde3ed3 100644 (file)
--- a/tests/perf/Short_Lisp_Intel-X520-DA2.robot
+++ b/tests/perf/Short_Lisp_Intel-X520-DA2.robot
@@ -64,7 +64,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 1.9mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 1.9mpps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -89,7 +89,7 @@
 | | ${framesize}= | Set Variable | 1480
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 740000pps
 | | ${framesize}= | Set Variable | 1480
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 740000pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -114,7 +114,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 forwarding initialized in a 3-node circular topology


@@ -138,7 +138,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.6mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.6mpps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -163,7 +163,7 @@
 | | ${framesize}= | Set Variable | 1480
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 740000pps
 | | ${framesize}= | Set Variable | 1480
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 740000pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -188,7 +188,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 forwarding initialized in a 3-node circular topology


@@ -212,7 +212,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.5mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.5mpps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -237,7 +237,7 @@
 | | ${framesize}= | Set Variable | 1480
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 740000pps
 | | ${framesize}= | Set Variable | 1480
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 740000pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -262,7 +262,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 forwarding initialized in a 3-node circular topology


@@ -286,7 +286,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 1.56mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 1.56mpps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -311,7 +311,7 @@
 | | ${framesize}= | Set Variable | 1460
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 740000pps
 | | ${framesize}= | Set Variable | 1460
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 740000pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -336,7 +336,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 forwarding initialized in a 3-node circular topology


@@ -360,7 +360,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.2mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.2mpps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -385,7 +385,7 @@
 | | ${framesize}= | Set Variable | 1460
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 740000pps
 | | ${framesize}= | Set Variable | 1460
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 740000pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -410,7 +410,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 forwarding initialized in a 3-node circular topology


@@ -434,7 +434,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.2mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.2mpps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -459,7 +459,7 @@
 | | ${framesize}= | Set Variable | 1460
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 740000pps
 | | ${framesize}= | Set Variable | 1460
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 740000pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -484,7 +484,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 forwarding initialized in a 3-node circular topology


@@ -508,7 +508,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 1.53mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 1.53mpps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -533,7 +533,7 @@
 | | ${framesize}= | Set Variable | 1460
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 720000pps
 | | ${framesize}= | Set Variable | 1460
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 720000pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -558,7 +558,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology


@@ -582,7 +582,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.25mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.25mpps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -607,7 +607,7 @@
 | | ${framesize}= | Set Variable | 1460
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 720000pps
 | | ${framesize}= | Set Variable | 1460
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 720000pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -632,7 +632,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology


@@ -656,7 +656,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.12mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.12mpps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -681,7 +681,7 @@
 | | ${framesize}= | Set Variable | 1460
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 720000pps
 | | ${framesize}= | Set Variable | 1460
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 720000pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -706,7 +706,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology


@@ -730,7 +730,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 1.75mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 1.75mpps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -755,7 +755,7 @@
 | | ${framesize}= | Set Variable | 1460
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 720000pps
 | | ${framesize}= | Set Variable | 1460
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 720000pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -780,7 +780,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology


@@ -804,7 +804,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.42mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.42mpps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -829,7 +829,7 @@
 | | ${framesize}= | Set Variable | 1460
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 720000pps
 | | ${framesize}= | Set Variable | 1460
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 720000pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -854,7 +854,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology


@@ -878,7 +878,7 @@
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.42mpps
 | | ${framesize}= | Set Variable | 78
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.42mpps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -903,7 +903,7 @@
 | | ${framesize}= | Set Variable | 1460
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 720000pps
 | | ${framesize}= | Set Variable | 1460
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 720000pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -928,7 +928,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology

diff --git a/tests/perf/Short_Xconnect_Dot1ad_Intel-X520-DA2.robot b/tests/perf/Short_Xconnect_Dot1ad_Intel-X520-DA2.robot
index 0c453a1..5bbc018 100644 (file)
--- a/tests/perf/Short_Xconnect_Dot1ad_Intel-X520-DA2.robot
+++ b/tests/perf/Short_Xconnect_Dot1ad_Intel-X520-DA2.robot
@@ -60,7 +60,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 2.9mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 2.9mpps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -86,7 +86,7 @@
 | | ${framesize}= | Set Variable | 1514
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 810635pps
 | | ${framesize}= | Set Variable | 1514
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 810635pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -112,7 +112,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138458pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138458pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology


@@ -137,7 +137,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 7.0mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 7.0mpps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -163,7 +163,7 @@
 | | ${framesize}= | Set Variable | 1514
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 810635pps
 | | ${framesize}= | Set Variable | 1514
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 810635pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -189,7 +189,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138458pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138458pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology


@@ -214,7 +214,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 8.0mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 8.0mpps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -240,7 +240,7 @@
 | | ${framesize}= | Set Variable | 1514
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 810635pps
 | | ${framesize}= | Set Variable | 1514
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 810635pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -266,7 +266,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138458pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138458pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology

diff --git a/tests/perf/Short_Xconnect_Dot1q_Intel-X520-DA2.robot b/tests/perf/Short_Xconnect_Dot1q_Intel-X520-DA2.robot
index d6bc868..530bfd0 100644 (file)
--- a/tests/perf/Short_Xconnect_Dot1q_Intel-X520-DA2.robot
+++ b/tests/perf/Short_Xconnect_Dot1q_Intel-X520-DA2.robot
@@ -56,7 +56,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 2.9mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 2.9mpps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -81,7 +81,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 720000pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 720000pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -106,7 +106,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology


@@ -130,7 +130,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 7.0mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 7.0mpps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -155,7 +155,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 720000pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 720000pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -180,7 +180,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology


@@ -204,7 +204,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 11.0mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 11.0mpps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -229,7 +229,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 720000pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 720000pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -254,7 +254,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 120000pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology

diff --git a/tests/perf/Short_Xconnect_Intel-X520-DA2.robot b/tests/perf/Short_Xconnect_Intel-X520-DA2.robot
index 6862d08..e62529f 100644 (file)
--- a/tests/perf/Short_Xconnect_Intel-X520-DA2.robot
+++ b/tests/perf/Short_Xconnect_Intel-X520-DA2.robot
@@ -52,7 +52,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.6mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.6mpps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -69,7 +69,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -86,7 +86,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect initialized in a 3-node circular topology


@@ -102,7 +102,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 8.3mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 8.3mpps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -119,7 +119,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -136,7 +136,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect initialized in a 3-node circular topology


@@ -152,7 +152,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 9.3mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 9.3mpps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -169,7 +169,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -186,7 +186,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect initialized in a 3-node circular topology

diff --git a/tests/perf/Short_Xconnect_Vxlan_Ipv4_Intel-X520-DA2.robot b/tests/perf/Short_Xconnect_Vxlan_Ipv4_Intel-X520-DA2.robot
index 4ede1ce..0e005f7 100644 (file)
--- a/tests/perf/Short_Xconnect_Vxlan_Ipv4_Intel-X520-DA2.robot
+++ b/tests/perf/Short_Xconnect_Vxlan_Ipv4_Intel-X520-DA2.robot
@@ -52,7 +52,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 2.4mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 2.4mpps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -69,7 +69,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 787153pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 787153pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology


@@ -85,7 +85,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 137816pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 137816pps

-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology


@@ -101,7 +101,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 5.2mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 5.2mpps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -118,7 +118,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 787153pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 787153pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology


@@ -134,7 +134,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 137816pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 137816pps

-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology


@@ -150,7 +150,7 @@
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 8.4mpps
 | | ${framesize}= | Set Variable | 64
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 8.4mpps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs


@@ -167,7 +167,7 @@
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 787153pps
 | | ${framesize}= | Set Variable | 1518
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 787153pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology


@@ -183,7 +183,7 @@
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 137816pps
 | | ${framesize}= | Set Variable | 9000
 | | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 137816pps

-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo

 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology