tests: add 2n1l l2 acl tests, update 2n-tx2 specs

Modify initialize L2BD ACL keywords to be usable for both 2-node and
3-node topologies and update testsuites accordingly.
Add the missing macip T-rex profile.
Add classifier tests to 2n-tx2 job specs.

Change-Id: I17b84b8fc18ef9a6f275ae0238a0665ac2017f01
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>

diff --git a/GPL/traffic_profiles/trex/trex-stl-2n-ethip4-macsrc10kip4src10k.py b/GPL/traffic_profiles/trex/trex-stl-2n-ethip4-macsrc10kip4src10k.py
new file mode 100644 (file)
index 0000000..a644e99
--- /dev/null
+++ b/GPL/traffic_profiles/trex/trex-stl-2n-ethip4-macsrc10kip4src10k.py
@@ -0,0 +1,170 @@
+# Copyright (c) 2021 Cisco and/or its affiliates.
+#
+# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
+#
+# Licensed under the Apache License 2.0 or
+# GNU General Public License v2.0 or later;  you may not use this file
+# except in compliance with one of these Licenses. You
+# may obtain a copy of the Licenses at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#     https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html
+#
+# Note: If this file is linked with Scapy, which is GPLv2+, your use of it
+# must be under GPLv2+.  If at any point in the future it is no longer linked
+# with Scapy (or other GPLv2+ licensed software), you are free to choose Apache 2.
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Stream profile for T-rex traffic generator.
+
+Stream profile:
+ - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time.
+ - Packet: | ETH | IP |
+ - Direction 0 --> 1:
+   - Source MAC address range:     ca:fe:00:00:00:00 - ca:fe:00:00:27:0f
+   - Source IP address range:      10.0.0.2 - 10.0.39.17
+   - Destination IP address range: 20.0.0.1
+ - Direction 1 --> 0:
+   - Source MAC address range:     fa:ce:00:00:00:00 - fa:ce:00:00:27:0f
+   - Source IP address range:      20.0.0.2 - 20.0.39.17
+   - Destination IP address range: 10.0.0.1
+"""
+
+from trex.stl.api import *
+from profile_trex_stateless_base_class import TrafficStreamsBaseClass
+
+
+class TrafficStreams(TrafficStreamsBaseClass):
+    """Stream profile."""
+
+    def __init__(self):
+        """Initialization and setting of streams' parameters."""
+
+        super(TrafficStreamsBaseClass, self).__init__()
+
+        self.clients = 10000
+
+        # MACs used in packet headers.
+        self.p1_src_start_mac = u"ca:fe:00:00:00:00"  # mask: 00:00:FF:FF:FF:FF
+
+        self.p2_src_start_mac = u"fa:ce:00:00:00:00"  # mask: 00:00:FF:FF:FF:FF
+
+        # IPs used in packet headers.
+        self.p1_src_start_ip = u"10.0.0.2"
+        self.p1_src_end_ip = u"10.0.39.17"
+        self.p1_dst_start_ip = u"20.0.0.1"
+
+        self.p2_src_start_ip = u"20.0.0.2"
+        self.p2_src_end_ip = u"20.0.39.17"
+        self.p2_dst_start_ip = u"10.0.0.1"
+
+    def define_packets(self):
+        """Defines the packets to be sent from the traffic generator.
+
+        Packet definition: | ETH | IP |
+
+        :returns: Packets to be sent from the traffic generator.
+        :rtype: tuple
+        """
+
+        # Direction 0 --> 1
+        base_pkt_a = (
+            Ether(
+                src=self.p1_src_start_mac
+            ) /
+            IP(
+                src=self.p1_src_start_ip,
+                dst=self.p1_dst_start_ip,
+                proto=61
+            )
+        )
+        # Direction 1 --> 0
+        base_pkt_b = (
+            Ether(
+                src=self.p2_src_start_mac
+            ) /
+            IP(
+                src=self.p2_src_start_ip,
+                dst=self.p2_dst_start_ip,
+                proto=61
+            )
+        )
+
+        # Direction 0 --> 1
+        vm1 = STLScVmRaw(
+            [
+                STLVmFlowVar(
+                    name=u"mac_src",
+                    min_value=0,
+                    max_value=self.clients-1,
+                    size=4,
+                    op=u"inc"
+                ),
+                STLVmWrFlowVar(
+                    fv_name=u"mac_src",
+                    pkt_offset=8
+                ),
+                STLVmFlowVar(
+                    name=u"src",
+                    min_value=self.p1_src_start_ip,
+                    max_value=self.p1_src_end_ip,
+                    size=4,
+                    op=u"inc"
+                ),
+                STLVmWrFlowVar(
+                    fv_name=u"src",
+                    pkt_offset=u"IP.src"
+                ),
+                STLVmFixIpv4(
+                    offset=u"IP"
+                )
+            ]
+        )
+        # Direction 1 --> 0
+        vm2 = STLScVmRaw(
+            [
+                STLVmFlowVar(
+                    name=u"mac_src",
+                    min_value=0,
+                    max_value=self.clients-1,
+                    size=4,
+                    op=u"inc"
+                ),
+                STLVmWrFlowVar(
+                    fv_name=u"mac_src",
+                    pkt_offset=8
+                ),
+                STLVmFlowVar(
+                    name=u"src",
+                    min_value=self.p2_src_start_ip,
+                    max_value=self.p2_src_end_ip,
+                    size=4,
+                    op=u"inc"
+                ),
+                STLVmWrFlowVar(
+                    fv_name=u"src",
+                    pkt_offset=u"IP.src"
+                ),
+                STLVmFixIpv4(
+                    offset=u"IP"
+                )
+            ]
+        )
+
+        return base_pkt_a, base_pkt_b, vm1, vm2
+
+
+def register():
+    """Register this traffic profile to T-rex.
+
+    Do not change this function.
+
+    :returns: Traffic streams.
+    :rtype: Object
+    """
+    return TrafficStreams()

diff --git a/docs/job_specs/report_iterative/2n-tx2/vpp-mlr-00.md b/docs/job_specs/report_iterative/2n-tx2/vpp-mlr-00.md
index d482aa3..2dd9345 100644 (file)
--- a/docs/job_specs/report_iterative/2n-tx2/vpp-mlr-00.md
+++ b/docs/job_specs/report_iterative/2n-tx2/vpp-mlr-00.md
@@ -1,55 +1,11 @@
 # 2n-tx2
 # 2n-tx2

-### tests 201
-### job hrs est. 37.62
-### job hrs real 37.62
-### test mins est. 11.23
-### test mins real 11.23
+### tests 87
+### job hrs est. 6,09
+### job hrs real N/A
+### test mins est. 4.20
+### test mins real N/A

 ## ./container_memif
 ## ./crypto
 ## ./container_memif
 ## ./crypto

-### intel-xl710
-#### dpdk-vfio-pci
-##### ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha
-1c AND 1518b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha
-2c AND 1518b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha
-4c AND 1518b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha
-1c AND imix AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha
-2c AND imix AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha
-4c AND imix AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha
-##### ethip4ipsec4tnlsw-ip4base-int-aes256gcm
-1c AND 1518b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes256gcm
-2c AND 1518b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes256gcm
-4c AND 1518b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes256gcm
-1c AND imix AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes256gcm
-2c AND imix AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes256gcm
-4c AND imix AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes256gcm
-##### ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha
-1c AND 1518b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha
-2c AND 1518b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha
-4c AND 1518b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha
-1c AND imix AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha
-2c AND imix AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha
-4c AND imix AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha
-##### ethip4ipsec1000tnlsw-ip4base-int-aes256gcm
-1c AND 1518b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes256gcm
-2c AND 1518b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes256gcm
-4c AND 1518b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes256gcm
-1c AND imix AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes256gcm
-2c AND imix AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes256gcm
-4c AND imix AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes256gcm
-##### ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha
-1c AND 1518b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha
-2c AND 1518b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha
-4c AND 1518b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha
-1c AND imix AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha
-2c AND imix AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha
-4c AND imix AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha
-##### ethip4ipsec10000tnlsw-ip4base-int-aes256gcm
-1c AND 1518b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes256gcm
-2c AND 1518b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes256gcm
-4c AND 1518b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes256gcm
-1c AND imix AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes256gcm
-2c AND imix AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes256gcm
-4c AND imix AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes256gcm

 ## ./ip4
 ### intel-xl710
 #### dpdk-vfio-pci
 ## ./ip4
 ### intel-xl710
 #### dpdk-vfio-pci


@@ -73,6 +29,10 @@
 1c AND 64b AND ndrpdr AND xl710 AND drv_vfio_pci AND dot1q-ip4base
 2c AND 64b AND ndrpdr AND xl710 AND drv_vfio_pci AND dot1q-ip4base
 4c AND 64b AND ndrpdr AND xl710 AND drv_vfio_pci AND dot1q-ip4base
 1c AND 64b AND ndrpdr AND xl710 AND drv_vfio_pci AND dot1q-ip4base
 2c AND 64b AND ndrpdr AND xl710 AND drv_vfio_pci AND dot1q-ip4base
 4c AND 64b AND ndrpdr AND xl710 AND drv_vfio_pci AND dot1q-ip4base

+##### ethip4-ip4base-iacldstbase
+1c AND 64b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4-ip4base-iacldstbase
+2c AND 64b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4-ip4base-iacldstbase
+4c AND 64b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4-ip4base-iacldstbase

 ##### ethip4udp-ip4base-iacl50sf-10kflows
 1c AND 64b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4udp-ip4base-iacl50sf-10kflows
 2c AND 64b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4udp-ip4base-iacl50sf-10kflows
 ##### ethip4udp-ip4base-iacl50sf-10kflows
 1c AND 64b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4udp-ip4base-iacl50sf-10kflows
 2c AND 64b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip4udp-ip4base-iacl50sf-10kflows


@@ -113,6 +73,10 @@
 1c AND 78b AND ndrpdr AND xl710 AND drv_vfio_pci AND dot1q-ip6base
 2c AND 78b AND ndrpdr AND xl710 AND drv_vfio_pci AND dot1q-ip6base
 4c AND 78b AND ndrpdr AND xl710 AND drv_vfio_pci AND dot1q-ip6base
 1c AND 78b AND ndrpdr AND xl710 AND drv_vfio_pci AND dot1q-ip6base
 2c AND 78b AND ndrpdr AND xl710 AND drv_vfio_pci AND dot1q-ip6base
 4c AND 78b AND ndrpdr AND xl710 AND drv_vfio_pci AND dot1q-ip6base

+##### ethip6-ip6base-iacldstbase
+1c AND 64b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip6-ip6base-iacldstbase
+2c AND 64b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip6-ip6base-iacldstbase
+4c AND 64b AND ndrpdr AND xl710 AND drv_vfio_pci AND ethip6-ip6base-iacldstbase

 ## ./ip6_tunnels
 ## ./l2
 ### intel-xl710
 ## ./ip6_tunnels
 ## ./l2
 ### intel-xl710

diff --git a/docs/job_specs/report_iterative/2n-tx2/vpp-mrr-00.md b/docs/job_specs/report_iterative/2n-tx2/vpp-mrr-00.md
index 1dc10cf..e922264 100644 (file)
--- a/docs/job_specs/report_iterative/2n-tx2/vpp-mrr-00.md
+++ b/docs/job_specs/report_iterative/2n-tx2/vpp-mrr-00.md
@@ -1,55 +1,11 @@
 # 2n-tx2
 # 2n-tx2

-### tests 198
-### job hrs est. 22.3
-### job hrs real 22.3
-### test mins est. 6.76
-### test mins real 6.76
+### tests 87
+### job hrs est. 66.12
+### job hrs real N/A
+### test mins est. 0.76
+### test mins real N/A

 ## ./container_memif
 ## ./crypto
 ## ./container_memif
 ## ./crypto

-### intel-xl710
-#### dpdk-vfio-pci
-##### ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha
-1c AND 1518b AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha
-2c AND 1518b AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha
-4c AND 1518b AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha
-1c AND imix AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha
-2c AND imix AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha
-4c AND imix AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha
-##### ethip4ipsec4tnlsw-ip4base-int-aes256gcm
-1c AND 1518b AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes256gcm
-2c AND 1518b AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes256gcm
-4c AND 1518b AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes256gcm
-1c AND imix AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes256gcm
-2c AND imix AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes256gcm
-4c AND imix AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec4tnlsw-ip4base-int-aes256gcm
-##### ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha
-1c AND 1518b AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha
-2c AND 1518b AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha
-4c AND 1518b AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha
-1c AND imix AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha
-2c AND imix AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha
-4c AND imix AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha
-##### ethip4ipsec1000tnlsw-ip4base-int-aes256gcm
-1c AND 1518b AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes256gcm
-2c AND 1518b AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes256gcm
-4c AND 1518b AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes256gcm
-1c AND imix AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes256gcm
-2c AND imix AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes256gcm
-4c AND imix AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec1000tnlsw-ip4base-int-aes256gcm
-##### ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha
-1c AND 1518b AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha
-2c AND 1518b AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha
-4c AND 1518b AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha
-1c AND imix AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha
-2c AND imix AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha
-4c AND imix AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha
-##### ethip4ipsec10000tnlsw-ip4base-int-aes256gcm
-1c AND 1518b AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes256gcm
-2c AND 1518b AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes256gcm
-4c AND 1518b AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes256gcm
-1c AND imix AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes256gcm
-2c AND imix AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes256gcm
-4c AND imix AND mrr AND xl710 AND drv_vfio_pci AND ethip4ipsec10000tnlsw-ip4base-int-aes256gcm

 ## ./ip4
 ### intel-xl710
 #### dpdk-vfio-pci
 ## ./ip4
 ### intel-xl710
 #### dpdk-vfio-pci


@@ -73,6 +29,10 @@
 1c AND 64b AND mrr AND xl710 AND drv_vfio_pci AND dot1q-ip4base
 2c AND 64b AND mrr AND xl710 AND drv_vfio_pci AND dot1q-ip4base
 4c AND 64b AND mrr AND xl710 AND drv_vfio_pci AND dot1q-ip4base
 1c AND 64b AND mrr AND xl710 AND drv_vfio_pci AND dot1q-ip4base
 2c AND 64b AND mrr AND xl710 AND drv_vfio_pci AND dot1q-ip4base
 4c AND 64b AND mrr AND xl710 AND drv_vfio_pci AND dot1q-ip4base

+##### ethip4-ip4base-iacldstbase
+1c AND 64b AND mrr AND xl710 AND drv_vfio_pci AND ethip4-ip4base-iacldstbase
+2c AND 64b AND mrr AND xl710 AND drv_vfio_pci AND ethip4-ip4base-iacldstbase
+4c AND 64b AND mrr AND xl710 AND drv_vfio_pci AND ethip4-ip4base-iacldstbase

 ##### ethip4udp-ip4base-iacl50sf-10kflows
 1c AND 64b AND mrr AND xl710 AND drv_vfio_pci AND ethip4udp-ip4base-iacl50sf-10kflows
 2c AND 64b AND mrr AND xl710 AND drv_vfio_pci AND ethip4udp-ip4base-iacl50sf-10kflows
 ##### ethip4udp-ip4base-iacl50sf-10kflows
 1c AND 64b AND mrr AND xl710 AND drv_vfio_pci AND ethip4udp-ip4base-iacl50sf-10kflows
 2c AND 64b AND mrr AND xl710 AND drv_vfio_pci AND ethip4udp-ip4base-iacl50sf-10kflows


@@ -113,6 +73,10 @@
 1c AND 78b AND mrr AND xl710 AND drv_vfio_pci AND dot1q-ip6base
 2c AND 78b AND mrr AND xl710 AND drv_vfio_pci AND dot1q-ip6base
 4c AND 78b AND mrr AND xl710 AND drv_vfio_pci AND dot1q-ip6base
 1c AND 78b AND mrr AND xl710 AND drv_vfio_pci AND dot1q-ip6base
 2c AND 78b AND mrr AND xl710 AND drv_vfio_pci AND dot1q-ip6base
 4c AND 78b AND mrr AND xl710 AND drv_vfio_pci AND dot1q-ip6base

+##### ethip6-ip6base-iacldstbase
+1c AND 64b AND mrr AND xl710 AND drv_vfio_pci AND ethip6-ip6base-iacldstbase
+2c AND 64b AND mrr AND xl710 AND drv_vfio_pci AND ethip6-ip6base-iacldstbase
+4c AND 64b AND mrr AND xl710 AND drv_vfio_pci AND ethip6-ip6base-iacldstbase

 ## ./ip6_tunnels
 ## ./l2
 ### intel-xl710
 ## ./ip6_tunnels
 ## ./l2
 ### intel-xl710

diff --git a/resources/libraries/robot/l2/l2_bridge_domain.robot b/resources/libraries/robot/l2/l2_bridge_domain.robot
index 812514b..f54d168 100644 (file)
--- a/resources/libraries/robot/l2/l2_bridge_domain.robot
+++ b/resources/libraries/robot/l2/l2_bridge_domain.robot
@@ -1,4 +1,5 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2021 PANTHEON.tech and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -842,7 +843,7 @@
 | | Set single interfaces in path up
 | | Show Memif on all DUTs | ${nodes}
 
 | | Set single interfaces in path up
 | | Show Memif on all DUTs | ${nodes}
 

-| Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology
+| Initialize L2 bridge domain with MACIP ACLs in circular topology

 | | [Documentation]
 | | ... | Setup L2BD topology by adding two interfaces on DUT1 into bridge
 | | ... | domain that is created automatically with index 1. Learning is
 | | [Documentation]
 | | ... | Setup L2BD topology by adding two interfaces on DUT1 into bridge
 | | ... | domain that is created automatically with index 1. Learning is


@@ -850,14 +851,16 @@
 | | ... | DUT1 interfaces.
 | |
 | | Set interfaces in path up
 | | ... | DUT1 interfaces.
 | |
 | | Set interfaces in path up

+| |

 | | VPP Add L2 Bridge Domain
 | | ... | ${dut1} | ${1} | ${DUT1_${int}1}[0] | ${DUT1_${int}2}[0]
 | | VPP Add L2 Bridge Domain
 | | ... | ${dut1} | ${1} | ${DUT1_${int}1}[0] | ${DUT1_${int}2}[0]

-| | Configure L2XC
-| | ... | ${dut2} | ${DUT2_${int}1}[0] | ${DUT2_${int}2}[0]

 | | Configure MACIP ACLs
 | | ... | ${dut1} | ${DUT1_${int}1}[0] | ${DUT1_${int}2}[0]
 | | Configure MACIP ACLs
 | | ... | ${dut1} | ${DUT1_${int}1}[0] | ${DUT1_${int}2}[0]

+| |
+| | Run Keyword If | ${duts_count} == 2
+| | ... | Configure L2XC | ${dut2} | ${DUT2_${int}1}[0] | ${DUT2_${int}2}[0]

 
 

-| Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | [Documentation]
 | | ... | Setup L2BD topology by adding two interfaces on DUT1 into bridge
 | | ... | domain that is created automatically with index 1. Learning is
 | | [Documentation]
 | | ... | Setup L2BD topology by adding two interfaces on DUT1 into bridge
 | | ... | domain that is created automatically with index 1. Learning is


@@ -865,9 +868,11 @@
 | | ... | interfaces.
 | |
 | | Set interfaces in path up
 | | ... | interfaces.
 | |
 | | Set interfaces in path up

+| |

 | | VPP Add L2 Bridge Domain
 | | ... | ${dut1} | ${1} | ${DUT1_${int}1}[0] | ${DUT1_${int}2}[0]
 | | VPP Add L2 Bridge Domain
 | | ... | ${dut1} | ${1} | ${DUT1_${int}1}[0] | ${DUT1_${int}2}[0]

-| | Configure L2XC
-| | ... | ${dut2} | ${DUT2_${int}1}[0] | ${DUT2_${int}2}[0]

 | | Configure IPv4 ACLs
 | | ... | ${dut1} | ${DUT1_${int}1}[0] | ${DUT1_${int}2}[0]
 | | Configure IPv4 ACLs
 | | ... | ${dut1} | ${DUT1_${int}1}[0] | ${DUT1_${int}2}[0]

+| |
+| | Run Keyword If | ${duts_count} == 2
+| | ... | Configure L2XC | ${dut2} | ${DUT2_${int}1}[0] | ${DUT2_${int}2}[0]

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot
index b7416d3..250c97e 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot
index ab801c7..b1e322e 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot
index 69f0400..faaabf4 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot
index a7845d8..d2f30dc 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot
index 6eec4c8..e103f90 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot
index b145d74..46c634a 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot
index 99eb67e..c3d4b39 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot
index bf3e6d4..468be89 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot
index ce176eb..296eba2 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot
index 15ec1f5..7733818 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot
index fe7b01c..8900ee1 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot
index f5bc65a..8536a3d 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot
index b211900..d358500 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot
index 3ecbc81..d5bb12e 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot
index 1319127..515737a 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot
index dc109a6..3764d73 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot
index 7cb11aa..d9232df 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot
index 8d60c90..b3e4975 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot
index a83ffd8..135ceeb 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -102,7 +102,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with MACIP ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot
index a1e3bdf..80e1cde 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -102,7 +102,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with MACIP ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot
index edae101..540289c 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -102,7 +102,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with MACIP ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot
index b06b6ee..1fecc12 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -101,7 +101,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with MACIP ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot
index ee6a9a4..ef5b112 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -101,7 +101,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with MACIP ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot
index 8fd53db..815ae62 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -101,7 +101,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with MACIP ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot
index 5af5168..6038e1e 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -101,7 +101,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with MACIP ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot
index 49aaa5d..0266f48 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -101,7 +101,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with MACIP ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot
index fbb7603..fa42e92 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -101,7 +101,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with MACIP ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot
index 3190db0..b71b11e 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot
index 5c2d5e0..a0ef617 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot
index cb1af1c..160c5dc 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot
index 985e4c8..801bea5 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot
index eaced3f..10847c1 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot
index a5bb88e..ebf8f33 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot
index 098df72..297d297 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot
index f7db2c7..8a68386 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot
index 1f3f040..ad9f0cf 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot
index 32e312d..ffe5675 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot
index dd0506b..086fc3e 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot
index 42ae2db..98673c4 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot
index 1767330..fb33596 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot
index 48d6807..4030d37 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot
index 0655e3a..639467d 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot
index 4ccade5..64efd47 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot
index 71cce9a..a018cfa 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot
index 9a84890..bb1f54c 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -100,7 +100,7 @@
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface
 | | And Apply Startup configuration on all VPP DUTs
 | | When Initialize layer driver | ${nic_driver}
 | | And Initialize layer interface

-| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology

 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***

diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot
new file mode 100644 (file)
index 0000000..5c79af9
--- /dev/null
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot
@@ -0,0 +1,153 @@
+# Copyright (c) 2021 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
+| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
+| ... | IACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | eth-l2bdbasemaclrn-iacl50sf-10kflows
+|
+| Suite Setup | Setup suite topology interfaces | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance | acl
+|
+| Test Template | Local Template
+|
+| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 1-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
+| ... | and MAC learning enabled.\
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
+| ... | DUT1 is tested with ${nic_name}.\
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on\
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
+| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
+| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L2
+| ${overhead}= | ${0}
+# ACL test setup
+| ${acl_action}= | permit+reflect
+| ${acl_apply_type}= | input
+| ${no_hit_aces_number}= | 50
+| ${flows_per_dir}= | 10k
+# starting points for non-hitting ACLs
+| ${src_ip_start}= | 30.30.30.1
+| ${dst_ip_start}= | 40.40.40.1
+| ${ip_step}= | ${1}
+| ${sport_start}= | ${1000}
+| ${dport_start}= | ${1000}
+| ${port_step}= | ${1}
+| ${trex_stream1_subnet}= | 10.10.10.0/24
+| ${trex_stream2_subnet}= | 20.20.20.0/24
+# Traffic profile:
+| ${traffic_profile}= | trex-stl-2n-ethip4udp-10u1000p-conc
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy
+| | ... | core(s).
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}

diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot
new file mode 100644 (file)
index 0000000..9a85004
--- /dev/null
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot
@@ -0,0 +1,153 @@
+# Copyright (c) 2021 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
+| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
+| ... | IACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | eth-l2bdbasemaclrn-iacl50sl-10kflows
+|
+| Suite Setup | Setup suite topology interfaces | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance | acl
+|
+| Test Template | Local Template
+|
+| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
+| ... | and MAC learning enabled.\
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
+| ... | DUT1 is tested with ${nic_name}.\
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on\
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
+| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
+| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L2
+| ${overhead}= | ${0}
+# ACL test setup
+| ${acl_action}= | permit
+| ${acl_apply_type}= | input
+| ${no_hit_aces_number}= | 50
+| ${flows_per_dir}= | 10k
+# starting points for non-hitting ACLs
+| ${src_ip_start}= | 30.30.30.1
+| ${dst_ip_start}= | 40.40.40.1
+| ${ip_step}= | ${1}
+| ${sport_start}= | ${1000}
+| ${dport_start}= | ${1000}
+| ${port_step}= | ${1}
+| ${trex_stream1_subnet}= | 10.10.10.0/24
+| ${trex_stream2_subnet}= | 20.20.20.0/24
+# Traffic profile:
+| ${traffic_profile}= | trex-stl-2n-ethip4udp-10u1000p-conc
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy
+| | ... | core(s).
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}

diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot
new file mode 100644 (file)
index 0000000..7a0b909
--- /dev/null
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot
@@ -0,0 +1,154 @@
+# Copyright (c) 2021 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
+| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS
+| ... | IACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | eth-l2bdbasemaclrn-macip-iacl50sl-10kflows
+|
+| Suite Setup | Setup suite topology interfaces | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance | macipacl
+|
+| Test Template | Local Template
+|
+| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
+| ... | and MAC learning enabled.\
+| ... | Required MACIP ACL rules are applied to input paths of both DUT1\
+| ... | interfaces. DUT1 is tested with ${nic_name}.\
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on\
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
+| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG\
+| ... | node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L2
+| ${overhead}= | ${0}
+# ACL test setup
+| ${acl_action}= | permit
+| ${no_hit_aces_number}= | 50
+| ${flows_per_dir}= | 10k
+# starting points for non-hitting ACLs
+| ${src_ip_start}= | 30.30.30.1
+| ${ip_step}= | ${1}
+| ${src_mac_start}= | 01:02:03:04:05:06
+| ${src_mac_step}= | ${1000}
+| ${src_mac_mask}= | 00:00:00:00:00:00
+| ${tg_stream1_mac}= | ca:fe:00:00:00:00
+| ${tg_stream2_mac}= | fa:ce:00:00:00:00
+| ${tg_mac_mask}= | ff:ff:ff:ff:c0:00
+| ${tg_stream1_subnet}= | 10.0.0.0/18
+| ${tg_stream2_subnet}= | 20.0.0.0/18
+# traffic profile
+| ${traffic_profile}= | trex-stl-2n-ethip4-macsrc10kip4src10k
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize L2 bridge domain with MACIP ACLs in circular topology
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}

diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot
new file mode 100644 (file)
index 0000000..bf97552
--- /dev/null
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot
@@ -0,0 +1,153 @@
+# Copyright (c) 2021 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
+| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
+| ... | OACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | eth-l2bdbasemaclrn-oacl50sf-10kflows
+|
+| Suite Setup | Setup suite topology interfaces | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance | acl
+|
+| Test Template | Local Template
+|
+| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
+| ... | and MAC learning enabled.\
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
+| ... | DUT1 is tested with ${nic_name}.\
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on\
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
+| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
+| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L2
+| ${overhead}= | ${0}
+# ACL test setup
+| ${acl_action}= | permit+reflect
+| ${acl_apply_type}= | output
+| ${no_hit_aces_number}= | 50
+| ${flows_per_dir}= | 10k
+# starting points for non-hitting ACLs
+| ${src_ip_start}= | 30.30.30.1
+| ${dst_ip_start}= | 40.40.40.1
+| ${ip_step}= | ${1}
+| ${sport_start}= | ${1000}
+| ${dport_start}= | ${1000}
+| ${port_step}= | ${1}
+| ${trex_stream1_subnet}= | 10.10.10.0/24
+| ${trex_stream2_subnet}= | 20.20.20.0/24
+# Traffic profile:
+| ${traffic_profile}= | trex-stl-2n-ethip4udp-10u1000p-conc
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}

diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot
new file mode 100644 (file)
index 0000000..5064cac
--- /dev/null
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot
@@ -0,0 +1,153 @@
+# Copyright (c) 2021 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
+| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
+| ... | OACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | eth-l2bdbasemaclrn-oacl50sl-10kflows
+|
+| Suite Setup | Setup suite topology interfaces | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance | acl
+|
+| Test Template | Local Template
+|
+| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
+| ... | and MAC learning enabled.\
+| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
+| ... | DUT1 is tested with ${nic_name}.\
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on\
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
+| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
+| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L2
+| ${overhead}= | ${0}
+# ACL test setup
+| ${acl_action}= | permit
+| ${acl_apply_type}= | output
+| ${no_hit_aces_number}= | 50
+| ${flows_per_dir}= | 10k
+# starting points for non-hitting ACLs
+| ${src_ip_start}= | 30.30.30.1
+| ${dst_ip_start}= | 40.40.40.1
+| ${ip_step}= | ${1}
+| ${sport_start}= | ${1000}
+| ${dport_start}= | ${1000}
+| ${port_step}= | ${1}
+| ${trex_stream1_subnet}= | 10.10.10.0/24
+| ${trex_stream2_subnet}= | 20.20.20.0/24
+# Traffic profile:
+| ${traffic_profile}= | trex-stl-2n-ethip4udp-10u1000p-conc
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize L2 bridge domain with IPv4 ACLs in circular topology
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}

diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot
index 9060b49..e17bf81 100644 (file)
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -29,7 +29,7 @@
 |
 | Documentation | *RFC2544: Pkt throughput for L2BD test cases*
 |
 |
 | Documentation | *RFC2544: Pkt throughput for L2BD test cases*
 |

-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 2-node circular topology\
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\

 | ... | with single links between nodes.
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
 | ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\
 | ... | with single links between nodes.
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
 | ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\

diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot
index b42c127..16c732c 100644 (file)
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -29,7 +29,7 @@
 |
 | Documentation | *RFC2544: Pkt throughput for L2BD test cases*
 |
 |
 | Documentation | *RFC2544: Pkt throughput for L2BD test cases*
 |

-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 2-node circular topology\
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\

 | ... | with single links between nodes.
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
 | ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\
 | ... | with single links between nodes.
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
 | ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\

diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot
index aa3f30f..5b4e8c1 100644 (file)
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.

 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:


@@ -29,7 +29,7 @@
 |
 | Documentation | *RFC2544: Pkt throughput for L2BD test cases*
 |
 |
 | Documentation | *RFC2544: Pkt throughput for L2BD test cases*
 |

-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 2-node circular topology\
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\

 | ... | with single links between nodes.
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
 | ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\
 | ... | with single links between nodes.
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
 | ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\