LISP EID virtualization support

Add new resource data to eid_example data. Need for new Eid API.

Change-Id: I0ed632fe8c1586e2ac4a1060a1900b76f4f6ca07
Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>

diff --git a/tests/suites/lisp/lisp_api_untagged.robot b/tests/suites/lisp/lisp_api_untagged.robot
index 83c5853..ba4951f 100644 (file)
--- a/tests/suites/lisp/lisp_api_untagged.robot
+++ b/tests/suites/lisp/lisp_api_untagged.robot
@@ -91,6 +91,7 @@
 | | ... | configure LISP eid IP address. [Ver1] Check DUT1 configured data
 | | ... | is correct. [Cfg2] Remove configured data. [Ver2] Check DUT1 all
 | | ... | eid IP addresses are removed. [Ref] RFC6830.
+| | [Tags] | EXPECTED_FAILING
 | | Given Enable lisp | ${nodes['DUT1']}
 | | When Lisp eid address is set | ${nodes['DUT1']} | ${eid_table}
 | | Then Lisp eid address is set correctly to eid table | ${nodes['DUT1']}

diff --git a/tests/suites/lisp/resources/lisp_api_resources.py b/tests/suites/lisp/resources/lisp_api_resources.py
index b7278a2..7a85fd8 100644 (file)
--- a/tests/suites/lisp/resources/lisp_api_resources.py
+++ b/tests/suites/lisp/resources/lisp_api_resources.py
@@ -22,24 +22,31 @@ lisp_status = [[{"gpe_status":"disabled",
 """Example lisp local eid we want set to VPP
 and then check if is set correct."""
 eid_table = [{'eid address': '192.168.0.1',
+              'vni': 0,
               'eid prefix len': 24,
               'locator-set': 'ls1'},
              {'eid address': '192.168.1.1',
+              'vni': 0,
               'eid prefix len': 24,
               'locator-set': 'ls1'},
              {'eid address': '192.168.2.1',
+              'vni': 0,
               'eid prefix len': 24,
               'locator-set': 'ls1'},
              {'eid address': '192.168.3.1',
+              'vni': 0,
               'eid prefix len': 24,
               'locator-set': 'ls1'},
              {'eid address': '10:1::1',
+              'vni': 0,
               'eid prefix len': 32,
               'locator-set': 'ls1'},
              {'eid address': '10:2::1',
+              'vni': 0,
               'eid prefix len': 32,
               'locator-set': 'ls1'},
              {'eid address': '10:3::1',
+              'vni': 0,
               'eid prefix len': 32,
               'locator-set': 'ls1'}]