| | ${rxq}= | Run Keyword If | ${auto_scale} == ${True}
| | ... | Set Variable | ${rxq_count_int}
| | ... | ELSE | Set Variable | ${1}
-| | ${bd_id2}= | Evaluate | ${nf_nodes}+1
-| | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if1} | ${1}
-| | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if2}
+| | ${bd_id1}= | Evaluate | ${nf_nodes} * (${nf_chain} - 1) + ${nf_chain}
+| | ${bd_id2}= | Evaluate | ${nf_nodes} * ${nf_chain} + ${nf_chain}
+| | ${dut_str}= | Convert To Lowercase | ${dut}
+| | Add interface to bridge domain
+| | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${nf_chain}_1}
+| | ... | ${bd_id1}
+| | Add interface to bridge domain
+| | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${nf_chain}_2}
| | ... | ${bd_id2}
| | :FOR | ${nf_node} | IN RANGE | 1 | ${nf_nodes}+1
| | | ${nf_id}= | Evaluate | (${nf_chain} - ${1}) * ${nf_nodes} + ${nf_node}
| | | ${sock1}= | Set Variable | memif-${dut}_CNF
| | | ${sock2}= | Set Variable | memif-${dut}_CNF
+| | | ${bd_id1}= | Evaluate | ${nf_id} + (${nf_chain} - 1)
+| | | ${bd_id2}= | Evaluate | ${bd_id1} + 1
| | | Set up memif interfaces on DUT node | ${nodes['${dut}']}
| | | ... | ${sock1} | ${sock2} | ${nf_id} | ${dut}-memif-${nf_id}-if1
| | | ... | ${dut}-memif-${nf_id}-if2 | ${rxq} | ${rxq}
-| | | ${bd_id2}= | Evaluate | ${nf_node}+1
-| | | Add interface to bridge domain | ${nodes['${dut}']}
-| | | ... | ${${dut}-memif-${nf_id}-if1} | ${nf_node}
-| | | Add interface to bridge domain | ${nodes['${dut}']}
-| | | ... | ${${dut}-memif-${nf_id}-if2} | ${bd_id2}
+| | | Add interface to bridge domain
+| | | ... | ${nodes['${dut}']} | ${${dut}-memif-${nf_id}-if1} | ${bd_id1}
+| | | Add interface to bridge domain
+| | | ... | ${nodes['${dut}']} | ${${dut}-memif-${nf_id}-if2} | ${bd_id2}
| Initialize L2 Bridge Domain with memif pairs
| | [Documentation]
| | ${rxq}= | Run Keyword If | ${auto_scale} == ${True}
| | ... | Set Variable | ${rxq_count_int}
| | ... | ELSE | Set Variable | ${1}
+| | ${bd_id1}= | Evaluate | ${nf_nodes} * (${nf_chain} - 1) + ${nf_chain}
+| | ${bd_id2}= | Evaluate | ${nf_nodes} * ${nf_chain} + ${nf_chain}
| | :FOR | ${dut} | IN | @{duts}
-| | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if1} | ${1}
-| | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if2} | ${2}
+| | | ${dut_str}= | Convert To Lowercase | ${dut}
+| | | Add interface to bridge domain
+| | | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${nf_chain}_1}
+| | | ... | ${bd_id1}
+| | | Add interface to bridge domain
+| | | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${nf_chain}_2}
+| | | ... | ${bd_id2}
| | | ${nf_id_frst}= | Evaluate | (${nf_chain}-${1}) * ${nf_nodes} + ${1}
| | | ${nf_id_last}= | Evaluate | (${nf_chain}-${1}) * ${nf_nodes} + ${nf_nodes}
| | | ${sid_frst}= | Evaluate | ${nf_id_frst} * ${2} - ${1}
| | | ... | memif-${dut}_CNF | mid=${nf_id_last} | sid=${sid_last}
| | | ... | memif_if=${dut}-memif-${nf_id_last}-if2
| | | ... | rxq=${rxq} | txq=${rxq}
-| | | Add interface to bridge domain | ${nodes['${dut}']}
-| | | ... | ${${dut}-memif-${nf_id_frst}-if1} | ${1}
-| | | Add interface to bridge domain | ${nodes['${dut}']}
-| | | ... | ${${dut}-memif-${nf_id_last}-if2} | ${2}
+| | | Add interface to bridge domain
+| | | ... | ${nodes['${dut}']} | ${${dut}-memif-${nf_id_frst}-if1} | ${bd_id1}
+| | | Add interface to bridge domain
+| | | ... | ${nodes['${dut}']} | ${${dut}-memif-${nf_id_last}-if2} | ${bd_id2}
| Initialize L2 Bridge Domain for multiple pipelines with memif pairs
| | [Documentation]
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
-| | When Start containers for test | auto_scale=${False} | pinning=${False}
+| | When Initialize layer interface
+| | And Start containers for test | auto_scale=${False} | pinning=${False}
| | And Initialize L2 Bridge Domain with memif pairs | auto_scale=${False}
| | Then Send ICMPv4 bidirectionally and verify received packets
| | ... | ${tg} | ${tg_if1} | ${tg_if2}
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | When Start containers for test
+| | When Initialize layer interface
+| | And Start containers for test
| | And Initialize L2 Bridge Domain with memif pairs
| | Then Find NDR and PDR intervals using optimized search
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | When Start containers for test
+| | When Initialize layer interface
+| | And Start containers for test
| | And Initialize L2 Bridge Domain with memif pairs
| | Then Find NDR and PDR intervals using optimized search
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${10}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-10c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${10}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-10c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${10}
+| ${nf_nodes}= | ${2}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-10c2n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${10} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${10} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${6}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c6n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${6}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c6n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${8}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c8n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${8}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c8n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${10}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c10n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${10}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c10n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${2}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c2n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${2}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c2n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${4}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c4n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${4}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c4n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${4}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c4n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${4}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c4n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${6}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c6n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${6}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c6n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${8}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c8n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${8}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c8n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${10}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c10n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${2}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c2n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${2}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c2n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${2}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c2n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${2}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c2n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${4}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c4n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${4}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c4n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${6}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c6n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${6}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${6}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${6}
+| ${nf_nodes}= | ${2}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c2n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${6}
+| ${nf_nodes}= | ${2}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c2n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${6}
+| ${nf_nodes}= | ${4}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c4n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${6} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${8}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${8}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${8}
+| ${nf_nodes}= | ${2}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c2n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${8}
+| ${nf_nodes}= | ${2}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c2n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple chains with memif pairs
-| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${10}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-10c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${10}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-10c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${10}
+| ${nf_nodes}= | ${2}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-10c2n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${10} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${10} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${10}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c10n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${10}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c10n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${2}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c2n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${2}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c2n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${4}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c4n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${4}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c4n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${6}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c6n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${6}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c6n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${8}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c8n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${8}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c8n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${6}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c6n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${6}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c6n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${8}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c8n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${8}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c8n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${10}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c10n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${10} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${2}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c2n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${2}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c2n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${4}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c4n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${2}
+| ${nf_nodes}= | ${4}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c4n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${4}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c4n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${4}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c4n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${6}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c6n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${6} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${2}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c2n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${4}
+| ${nf_nodes}= | ${2}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c2n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${6}
+| ${nf_nodes}= | ${2}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c2n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${6}
+| ${nf_nodes}= | ${2}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c2n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${6}
+| ${nf_nodes}= | ${4}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c4n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${6} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${4} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${6}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${6}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${8}
+| ${nf_nodes}= | ${2}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c2n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${8}
+| ${nf_nodes}= | ${2}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c2n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
+| ${nf_chains}= | ${8}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
+| ${nf_chains}= | ${8}
+| ${nf_nodes}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-8c1n
# Container
| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer interface
+| | ... | count=${nf_chains}
| | And Start containers for test
-| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
-| | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False}
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***