Delete old NDR/PDR keywords

Change-Id: I932d46646408a030ffdeb78b3a3e19c39455750d
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

diff --git a/resources/libraries/robot/performance/performance_utils.robot b/resources/libraries/robot/performance/performance_utils.robot
index ec4033a..1be3119 100644 (file)
--- a/resources/libraries/robot/performance/performance_utils.robot
+++ b/resources/libraries/robot/performance/performance_utils.robot
@@ -168,283 +168,6 @@
 | | Return From Keyword If | '${framesize}' == 'IMIX_v4_1' | ${353.83333}
 | | Return From Keyword | ${framesize}
 
-| Find NDR using linear search and pps
-| | [Documentation]
-| | ... | Find throughput by using RFC2544 linear search with non drop rate.
-| | ...
-| | ... | *Arguments:*
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
-| | ... | - start_rate - Initial start rate [pps]. Type: float
-| | ... | - step_rate - Step of linear search [pps]. Type: float
-| | ... | - topology_type - Topology type. Type: string
-| | ... | - min_rate - Lower limit of search [pps]. Type: float
-| | ... | - max_rate - Upper limit of search [pps]. Type: float
-| | ...
-| | ... | *Return:*
-| | ... | - No value returned
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Find NDR using linear search and pps \| 64 \| 5000000 \
-| | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 \|
-| | ...
-| | [Arguments] | ${framesize} | ${start_rate} | ${step_rate}
-| | ... | ${topology_type} | ${min_rate} | ${max_rate}
-| | ...
-| | ${duration}= | Set Variable | ${perf_trial_duration}
-| | Set Duration | ${duration}
-| | Set Search Rate Boundaries | ${max_rate} | ${min_rate}
-| | Set Search Linear Step | ${step_rate}
-| | Set Search Frame Size | ${framesize}
-| | Set Search Rate Type pps
-| | Linear Search | ${start_rate} | ${topology_type}
-| | ${rate_per_stream} | ${lat}= | Verify Search Result
-| | ${tmp}= | Create List | 100%NDR | ${lat}
-| | ${latency}= | Create List | ${tmp}
-| | ${rate_50p}= | Evaluate | int(${rate_per_stream}*0.5)
-| | ${lat_50p}= | Measure latency pps | ${duration} | ${rate_50p}
-| | ... | ${framesize} | ${topology_type}
-| | ${tmp}= | Create List | 50%NDR | ${lat_50p}
-| | Append To List | ${latency} | ${tmp}
-| | ${rate_10p}= | Evaluate | int(${rate_per_stream}*0.1)
-| | ${lat_10p}= | Measure latency pps | ${duration} | ${rate_10p}
-| | ... | ${framesize} | ${topology_type}
-| | ${tmp}= | Create List | 10%NDR | ${lat_10p}
-| | Append To List | ${latency} | ${tmp}
-| | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2
-| | ... | ${latency}
-| | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps
-| | ... | ${framesize} | ${topology_type} | fail_on_loss=${False}
-
-| Find PDR using linear search and pps
-| | [Documentation]
-| | ... | Find throughput by using RFC2544 linear search with partial drop rate
-| | ... | with PDR threshold and type specified by parameter.
-| | ...
-| | ... | *Arguments:*
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
-| | ... | - start_rate - Initial start rate [pps]. Type: float
-| | ... | - step_rate - Step of linear search [pps]. Type: float
-| | ... | - topology_type - Topology type. Type: string
-| | ... | - min_rate - Lower limit of search [pps]. Type: float
-| | ... | - max_rate - Upper limit of search [pps]. Type: float
-| | ... | - loss_acceptance - Accepted loss during search. Type: float
-| | ... | - loss_acceptance_type - Percentage or frames. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Find PDR using linear search and pps \| 64 \| 5000000 \
-| | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 0.5 \| percentage \|
-| | ...
-| | [Arguments] | ${framesize} | ${start_rate} | ${step_rate}
-| | ... | ${topology_type} | ${min_rate} | ${max_rate}
-| | ... | ${loss_acceptance}=0 | ${loss_acceptance_type}='frames'
-| | ...
-| | ${duration}= | Set Variable | ${perf_trial_duration}
-| | Set Duration | ${duration}
-| | Set Search Rate Boundaries | ${max_rate} | ${min_rate}
-| | Set Search Linear Step | ${step_rate}
-| | Set Search Frame Size | ${framesize}
-| | Set Search Rate Type pps
-| | Set Loss Acceptance | ${loss_acceptance}
-| | Run Keyword If | '${loss_acceptance_type}' == 'percentage'
-| | ... | Set Loss Acceptance Type Percentage
-| | Linear Search | ${start_rate} | ${topology_type}
-| | ${rate_per_stream} | ${lat}= | Verify Search Result
-| | ${tmp}= | Create List | 100%PDR | ${lat}
-| | ${latency}= | Create List | ${tmp}
-| | Display result of PDR search | ${rate_per_stream} | ${framesize} | 2
-| | ... | ${loss_acceptance} | ${loss_acceptance_type} | ${latency}
-| | Traffic should pass with partial loss | ${duration} | ${rate_per_stream}pps
-| | ... | ${framesize} | ${topology_type} | ${loss_acceptance}
-| | ... | ${loss_acceptance_type} | fail_on_loss=${False}
-
-| Find NDR using binary search and pps
-| | [Documentation]
-| | ... | Find throughput by using RFC2544 binary search with non drop rate.
-| | ...
-| | ... | *Arguments:*
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
-| | ... | - binary_min - Lower boundary of search [pps]. Type: float
-| | ... | - binary_max - Upper boundary of search [pps]. Type: float
-| | ... | - topology_type - Topology type. Type: string
-| | ... | - min_rate - Lower limit of search [pps]. Type: float
-| | ... | - max_rate - Upper limit of search [pps]. Type: float
-| | ... | - threshold - Threshold to stop search [pps]. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Find NDR using binary search and pps \| 64 \| 6000000 \
-| | ... | \| 12000000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 50000 \|
-| | ...
-| | [Arguments] | ${framesize} | ${binary_min} | ${binary_max}
-| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold}
-| | ...
-| | ${duration}= | Set Variable | ${perf_trial_duration}
-| | Set Duration | ${duration}
-| | Set Search Rate Boundaries | ${max_rate} | ${min_rate}
-| | Set Search Frame Size | ${framesize}
-| | Set Search Rate Type pps
-| | Set Binary Convergence Threshold | ${threshold}
-| | Binary Search | ${binary_min} | ${binary_max} | ${topology_type}
-| | ${rate_per_stream} | ${lat}= | Verify Search Result
-| | ${tmp}= | Create List | 100%NDR | ${lat}
-| | ${latency}= | Create List | ${tmp}
-| | ${rate_50p}= | Evaluate | int(${rate_per_stream}*0.5)
-| | ${lat_50p}= | Measure latency pps | ${duration} | ${rate_50p}
-| | ... | ${framesize} | ${topology_type}
-| | ${tmp}= | Create List | 50%NDR | ${lat_50p}
-| | Append To List | ${latency} | ${tmp}
-| | ${rate_10p}= | Evaluate | int(${rate_per_stream}*0.1)
-| | ${lat_10p}= | Measure latency pps | ${duration} | ${rate_10p}
-| | ... | ${framesize} | ${topology_type}
-| | ${tmp}= | Create List | 10%NDR | ${lat_10p}
-| | Append To List | ${latency} | ${tmp}
-| | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2
-| | ... | ${latency}
-| | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps
-| | ... | ${framesize} | ${topology_type} | fail_on_loss=${False}
-
-| Find PDR using binary search and pps
-| | [Documentation]
-| | ... | Find throughput by using RFC2544 binary search with partial drop rate
-| | ... | with PDR threshold and type specified by parameter.
-| | ...
-| | ... | *Arguments:*
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
-| | ... | - binary_min - Lower boundary of search [pps]. Type: float
-| | ... | - binary_max - Upper boundary of search [pps]. Type: float
-| | ... | - topology_type - Topology type. Type: string
-| | ... | - min_rate - Lower limit of search [pps]. Type: float
-| | ... | - max_rate - Upper limit of search [pps]. Type: float
-| | ... | - threshold - Threshold to stop search [pps]. Type: integer
-| | ... | - loss_acceptance - Accepted loss during search. Type: float
-| | ... | - loss_acceptance_type - Percentage or frames. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Find PDR using binary search and pps \| 64 \| 6000000 \
-| | ... | \| 12000000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 50000 \| 0.5 \
-| | ... | \| percentage \|
-| | ...
-| | [Arguments] | ${framesize} | ${binary_min} | ${binary_max}
-| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${loss_acceptance}=0 | ${loss_acceptance_type}='frames'
-| | ...
-| | ${duration}= | Set Variable | ${perf_trial_duration}
-| | Set Duration | ${duration}
-| | Set Search Rate Boundaries | ${max_rate} | ${min_rate}
-| | Set Search Frame Size | ${framesize}
-| | Set Search Rate Type pps
-| | Set Loss Acceptance | ${loss_acceptance}
-| | Run Keyword If | '${loss_acceptance_type}' == 'percentage'
-| | ... | Set Loss Acceptance Type Percentage
-| | Set Binary Convergence Threshold | ${threshold}
-| | Binary Search | ${binary_min} | ${binary_max} | ${topology_type}
-| | ${rate_per_stream} | ${lat}= | Verify Search Result
-| | ${tmp}= | Create List | 100%PDR | ${lat}
-| | ${latency}= | Create List | ${tmp}
-| | Display result of PDR search | ${rate_per_stream} | ${framesize} | 2
-| | ... | ${loss_acceptance} | ${loss_acceptance_type} | ${latency}
-| | Traffic should pass with partial loss | ${duration} | ${rate_per_stream}pps
-| | ... | ${framesize} | ${topology_type} | ${loss_acceptance}
-| | ... | ${loss_acceptance_type} | fail_on_loss=${False}
-
-| Find NDR using combined search and pps
-| | [Documentation]
-| | ... | Find throughput by using RFC2544 combined search (linear+binary) with
-| | ... | non drop rate.
-| | ...
-| | ... | *Arguments:*
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
-| | ... | - start_rate - Initial start rate [pps]. Type: float
-| | ... | - step_rate - Step of linear search [pps]. Type: float
-| | ... | - topology_type - Topology type. Type: string
-| | ... | - min_rate - Lower limit of search [pps]. Type: float
-| | ... | - max_rate - Upper limit of search [pps]. Type: float
-| | ... | - threshold - Threshold to stop search [pps]. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Find NDR using combined search and pps \| 64 \| 5000000 \
-| | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 5000 \|
-| | ...
-| | [Arguments] | ${framesize} | ${start_rate} | ${step_rate}
-| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold}
-| | ...
-| | ${duration}= | Set Variable | ${perf_trial_duration}
-| | Set Duration | ${duration}
-| | Set Search Rate Boundaries | ${max_rate} | ${min_rate}
-| | Set Search Linear Step | ${step_rate}
-| | Set Search Frame Size | ${framesize}
-| | Set Search Rate Type pps
-| | Set Binary Convergence Threshold | ${threshold}
-| | Combined Search | ${start_rate} | ${topology_type}
-| | ${rate_per_stream} | ${lat}= | Verify Search Result
-| | ${tmp}= | Create List | 100%NDR | ${lat}
-| | ${latency}= | Create List | ${tmp}
-| | ${rate_50p}= | Evaluate | int(${rate_per_stream}*0.5)
-| | ${lat_50p}= | Measure latency pps | ${duration} | ${rate_50p}
-| | ... | ${framesize} | ${topology_type}
-| | ${tmp}= | Create List | 50%NDR | ${lat_50p}
-| | Append To List | ${latency} | ${tmp}
-| | ${rate_10p}= | Evaluate | int(${rate_per_stream}*0.1)
-| | ${lat_10p}= | Measure latency pps | ${duration} | ${rate_10p}
-| | ... | ${framesize} | ${topology_type}
-| | ${tmp}= | Create List | 10%NDR | ${lat_10p}
-| | Append To List | ${latency} | ${tmp}
-| | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2
-| | ... | ${latency}
-| | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps
-| | ... | ${framesize} | ${topology_type}
-| | ... | fail_on_loss=${False}
-
-| Find PDR using combined search and pps
-| | [Documentation]
-| | ... | Find throughput by using RFC2544 combined search (linear+binary) with
-| | ... | partial drop rate with PDR threshold and type specified by parameter.
-| | ...
-| | ... | *Arguments:*
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
-| | ... | - start_rate - Initial start rate [pps]. Type: float
-| | ... | - step_rate - Step of linear search [pps]. Type: float
-| | ... | - topology_type - Topology type. Type: string
-| | ... | - min_rate - Lower limit of search [pps]. Type: float
-| | ... | - max_rate - Upper limit of search [pps]. Type: float
-| | ... | - threshold - Threshold to stop search [pps]. Type: integer
-| | ... | - loss_acceptance - Accepted loss during search. Type: float
-| | ... | - loss_acceptance_type - Percentage or frames. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Find PDR using combined search and pps \| 64 \| 5000000 \
-| | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 5000 \| 0.5 \
-| | ... | \| percentage \|
-| | ...
-| | [Arguments] | ${framesize} | ${start_rate} | ${step_rate}
-| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${loss_acceptance}=0 | ${loss_acceptance_type}='frames'
-| | ...
-| | ${duration}= | Set Variable | ${perf_trial_duration}
-| | Set Duration | ${duration}
-| | Set Search Rate Boundaries | ${max_rate} | ${min_rate}
-| | Set Search Linear Step | ${step_rate}
-| | Set Search Frame Size | ${framesize}
-| | Set Search Rate Type pps
-| | Set Loss Acceptance | ${loss_acceptance}
-| | Run Keyword If | '${loss_acceptance_type}' == 'percentage'
-| | ... | Set Loss Acceptance Type Percentage
-| | Set Binary Convergence Threshold | ${threshold}
-| | Combined Search | ${start_rate} | ${topology_type}
-| | ${rate_per_stream} | ${lat}= | Verify Search Result
-| | ${tmp}= | Create List | 100%PDR | ${lat}
-| | ${latency}= | Create List | ${tmp}
-| | Display result of PDR search | ${rate_per_stream} | ${framesize} | 2
-| | ... | ${loss_acceptance} | ${loss_acceptance_type} | ${latency}
-| | Traffic should pass with partial loss | ${duration} | ${rate_per_stream}pps
-| | ... | ${framesize} | ${topology_type} | ${loss_acceptance}
-| | ... | ${loss_acceptance_type} | fail_on_loss=${False}
-
 | Find NDR and PDR intervals using optimized search
 | | [Documentation]
 | | ... | Find boundaries for RFC2544 compatible NDR and PDR values
@@ -614,78 +337,6 @@
 | | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps
 | | ... | ${framesize} | ${topology_type} | fail_on_loss=${False}
 
-| Display result of NDR search
-| | [Documentation]
-| | ... | Display result of NDR search in packet per seconds (total and per
-| | ... | stream) and Gbps total bandwidth with untagged packet.
-| | ... | Througput is calculated as:
-| | ... | Measured rate per stream * Total number of streams
-| | ... | Bandwidth is calculated as:
-| | ... | (Throughput * (L2 Frame Size + IPG) * 8) / Max bitrate of NIC
-| | ...
-| | ... | *Arguments:*
-| | ... | - rate_per_stream - Measured rate per stream [pps]. Type: string
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
-| | ... | - nr_streams - Total number of streams. Type: integer
-| | ... | - latency - Latency stats. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Display result of NDR search \| 4400000 \| 64 \| 2 \
-| | ... | \| [100%NDR, [10/10/10, 1/2/3]] \|
-| | ...
-| | [Arguments] | ${rate_per_stream} | ${framesize} | ${nr_streams} | ${latency}
-| | ...
-| | ${framesize}= | Get Frame Size | ${framesize}
-| | ${rate_total}= | Evaluate | ${rate_per_stream}*${nr_streams}
-| | ${bandwidth_total}= | Evaluate | ${rate_total}*(${framesize}+20)*8/(10**9)
-| | Set Test Message | FINAL_RATE: ${rate_total} pps
-| | Set Test Message | (${nr_streams}x ${rate_per_stream} pps) | append=yes
-| | Set Test Message | ${\n}FINAL_BANDWIDTH: ${bandwidth_total} Gbps (untagged)
-| | ... | append=yes
-| | Set Test Message | ${\n}LATENCY usec [min/avg/max] | append=yes
-| | :FOR | ${lat} | IN | @{latency}
-| | | Set Test Message | ${\n}LAT_${lat[0]}: ${lat[1]} | append=yes
-
-| Display result of PDR search
-| | [Documentation]
-| | ... | Display result of PDR search in packet per seconds (total and per
-| | ... | stream) and Gbps total bandwidth with untagged packet.
-| | ... | Througput is calculated as:
-| | ... | Measured rate per stream * Total number of streams
-| | ... | Bandwidth is calculated as:
-| | ... | (Throughput * (L2 Frame Size + IPG) * 8) / Max bitrate of NIC
-| | ...
-| | ... | *Arguments:*
-| | ... | - rate_per_stream - Measured rate per stream [pps]. Type: string
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
-| | ... | - nr_streams - Total number of streams. Type: integer
-| | ... | - loss_acceptance - Accepted loss during search. Type: float
-| | ... | - loss_acceptance_type - Percentage or frames. Type: string
-| | ... | - latency - Latency stats. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Display result of PDR search \| 4400000 \| 64 \| 2 \| 0.5 \
-| | ... | \| percentage \| [100%NDR, [10/10/10, 1/2/3]] \|
-| | ...
-| | [Arguments] | ${rate_per_stream} | ${framesize} | ${nr_streams}
-| | ... | ${loss_acceptance} | ${loss_acceptance_type} | ${latency}
-| | ...
-| | ${framesize}= | Get Frame Size | ${framesize}
-| | ${rate_total}= | Evaluate | ${rate_per_stream}*${nr_streams}
-| | ${bandwidth_total}= | Evaluate | ${rate_total}*(${framesize}+20)*8/(10**9)
-| | Set Test Message | FINAL_RATE: ${rate_total} pps
-| | Set Test Message | (${nr_streams}x ${rate_per_stream} pps) | append=yes
-| | Set Test Message | ${\n}FINAL_BANDWIDTH: ${bandwidth_total} Gbps (untagged)
-| | ... | append=yes
-| | Set Test Message | ${\n}LATENCY usec [min/avg/max] | append=yes
-| | :FOR | ${lat} | IN | @{latency}
-| | | Set Test Message | ${\n}LAT_${lat[0]}: ${lat[1]} | append=yes
-| | Set Test Message
-| | ... | ${\n}LOSS_ACCEPTANCE: ${loss_acceptance} ${loss_acceptance_type}
-| | ... | append=yes
-
 | Measure latency pps
 | | [Documentation]
 | | ... | Send traffic at specified rate. Measure min/avg/max latency
@@ -732,33 +383,6 @@
 | | ... | ${topology_type}
 | | Run Keyword If | ${fail_on_loss} | No traffic loss occurred
 
-| Traffic should pass with partial loss
-| | [Documentation]
-| | ... | Send traffic at specified rate. Partial packet loss is accepted
-| | ... | within loss acceptance value specified as argument.
-| | ...
-| | ... | *Arguments:*
-| | ... | - duration - Duration of traffic run [s]. Type: integer
-| | ... | - rate - Rate for sending packets. Type: string
-| | ... | - framesize - L2 Frame Size [B] or IMIX_v4_1. Type: integer/string
-| | ... | - topology_type - Topology type. Type: string
-| | ... | - loss_acceptance - Accepted loss during search. Type: float
-| | ... | - loss_acceptance_type - Percentage or frames. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Traffic should pass with partial loss \| 10 \| 4.0mpps \| 64 \
-| | ... | \| 3-node-IPv4 \| 0.5 \| percentage \|
-| | ...
-| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type}
-| | ... | ${loss_acceptance} | ${loss_acceptance_type}
-| | ... | ${fail_on_loss}=${True}
-| | ...
-| | Send traffic at specified rate | ${duration} | ${rate} | ${framesize}
-| | ... | ${topology_type}
-| | Run Keyword If | ${fail_on_loss} | Partial traffic loss accepted
-| | ... | ${loss_acceptance} | ${loss_acceptance_type}
-
 | Traffic should pass with maximum rate
 | | [Documentation]
 | | ... | Send traffic at maximum rate.