CSIT-1342: Edit the static content for CSIT-1810 report

Change-Id: I1b838deed822159d78728805c8269cf8a6592d2c
Signed-off-by: Tibor Frank <tifrank@cisco.com>

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst
index 0199276..d040ccd 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst
@@ -284,6 +284,10 @@ CSIT source code for the test cases used for plots can be found in
             \label{fig:memif-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
+.. raw:: latex
+
+    \clearpage
+
 2n-skx-x710
 ~~~~~~~~~~~
 
@@ -341,6 +345,10 @@ CSIT source code for the test cases used for plots can be found in
             \label{fig:memif-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
+.. raw:: latex
+
+    \clearpage
+
 2n-skx-xxv710
 ~~~~~~~~~~~~~
 

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst
index f975f2d..8c108a3 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst
@@ -220,6 +220,10 @@ CSIT source code for the test cases used for plots can be found in
             \label{fig:k8s-memif-3n-hsw-x710-64b-2t2c-base_and_scale-l2xc-ndr-lat}
     \end{figure}
 
+.. raw:: latex
+
+    \clearpage
+
 64b-1t1c-base_and_scale-l2bd
 ----------------------------
 

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ip4_tunnels.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ip4_tunnels.rst
index 27e83c4..efd578e 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/ip4_tunnels.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ip4_tunnels.rst
@@ -339,6 +339,10 @@ CSIT source code for the test cases used for plots can be found in
             \label{fig:ip4tun-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
+.. raw:: latex
+
+    \clearpage
+
 64b-2t1c-base_and_features
 --------------------------
 

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ipsec.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ipsec.rst
index 30363a7..b4fc3a8 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/ipsec.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ipsec.rst
@@ -104,6 +104,10 @@ CSIT source code for the test cases used for plots can be found in
             \label{fig:ipsec-3n-hsw-xl710-64b-2t2c-base-ndr-lat}
     \end{figure}
 
+.. raw:: latex
+
+    \clearpage
+
 3n-hsw-xl710
 ~~~~~~~~~~~~
 
@@ -161,6 +165,10 @@ CSIT source code for the test cases used for plots can be found in
             \label{fig:ipsec-3n-hsw-xl710-64b-2t2c-scale-ndr-lat}
     \end{figure}
 
+.. raw:: latex
+
+    \clearpage
+
 3n-hsw-xl710
 ~~~~~~~~~~~~
 

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/vm_vhost.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/vm_vhost.rst
index 11072cc..3e22d35 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/vm_vhost.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/vm_vhost.rst
@@ -77,19 +77,19 @@ CSIT source code for the test cases used for plots can be found in
 
     \clearpage
 
-64b-4t2c-base-l2sw
+64b-2t2c-base-l2sw
 ------------------
 
 .. raw:: html
 
     <center><b>
 
-:index:`Packet Latency: vhost-l2sw-3n-hsw-x520-64b-4t2c-base-ndr`
+:index:`Packet Latency: vhost-l2sw-3n-hsw-x520-64b-2t2c-base-ndr`
 
 .. raw:: html
 
     </b>
-    <iframe id="ifrm02" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-3n-hsw-x520-64b-4t2c-base-ndr-lat.html"></iframe>
+    <iframe id="ifrm02" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-3n-hsw-x520-64b-2t2c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -98,8 +98,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-3n-hsw-x520-64b-4t2c-base-ndr-lat}
-            \label{fig:vhost-l2sw-3n-hsw-x520-64b-4t2c-base-ndr-lat}
+            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-3n-hsw-x520-64b-2t2c-base-ndr-lat}
+            \label{fig:vhost-l2sw-3n-hsw-x520-64b-2t2c-base-ndr-lat}
     \end{figure}
 
 .. raw:: latex
@@ -746,6 +746,10 @@ CSIT source code for the test cases used for plots can be found in
             \label{fig:vhost-ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat}
     \end{figure}
 
+.. raw:: latex
+
+    \clearpage
+
 3n-skx-x710
 ~~~~~~~~~~~
 
@@ -778,19 +782,19 @@ CSIT source code for the test cases used for plots can be found in
 
     \clearpage
 
-64b-2t2c-base-l2sw
+64b-4t2c-base-l2sw
 ------------------
 
 .. raw:: html
 
     <center><b>
 
-:index:`Packet Latency: vhost-l2sw-3n-skx-x710-64b-2t2c-base-ndr`
+:index:`Packet Latency: vhost-l2sw-3n-skx-x710-64b-4t2c-base-ndr`
 
 .. raw:: html
 
     </b>
-    <iframe id="ifrm26" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-3n-skx-x710-64b-2t2c-base-ndr-lat.html"></iframe>
+    <iframe id="ifrm26" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-3n-skx-x710-64b-4t2c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -799,8 +803,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-3n-skx-x710-64b-2t2c-base-ndr-lat}
-            \label{fig:vhost-l2sw-3n-skx-x710-64b-2t2c-base-ndr-lat}
+            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-3n-skx-x710-64b-4t2c-base-ndr-lat}
+            \label{fig:vhost-l2sw-3n-skx-x710-64b-4t2c-base-ndr-lat}
     \end{figure}
 
 .. raw:: latex
@@ -836,19 +840,19 @@ CSIT source code for the test cases used for plots can be found in
 
     \clearpage
 
-64b-2t2c-base_and_scale-l2sw
+64b-4t2c-base_and_scale-l2sw
 ----------------------------
 
 .. raw:: html
 
     <center><b>
 
-:index:`Packet Latency: vhost-l2sw-3n-skx-x710-64b-2t2c-base_and_scale-ndr`
+:index:`Packet Latency: vhost-l2sw-3n-skx-x710-64b-4t2c-base_and_scale-ndr`
 
 .. raw:: html
 
     </b>
-    <iframe id="ifrm28" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-3n-skx-x710-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
+    <iframe id="ifrm28" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -857,8 +861,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-3n-skx-x710-64b-2t2c-base_and_scale-ndr-lat}
-            \label{fig:vhost-l2sw-3n-skx-x710-64b-2t2c-base_and_scale-ndr-lat}
+            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:vhost-l2sw-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 .. raw:: latex
@@ -894,19 +898,19 @@ CSIT source code for the test cases used for plots can be found in
 
     \clearpage
 
-64b-2t2c-base-vm-l2sw
+64b-4t2c-base-vm-l2sw
 ---------------------
 
 .. raw:: html
 
     <center><b>
 
-:index:`Packet Latency: vhost-l2sw-3n-skx-x710-64b-2t2c-base-vm-ndr`
+:index:`Packet Latency: vhost-l2sw-3n-skx-x710-64b-4t2c-base-vm-ndr`
 
 .. raw:: html
 
     </b>
-    <iframe id="ifrm30" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-3n-skx-x710-64b-2t2c-base-vm-ndr-lat.html"></iframe>
+    <iframe id="ifrm30" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-3n-skx-x710-64b-4t2c-base-vm-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -915,8 +919,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-3n-skx-x710-64b-2t2c-base-vm-ndr-lat}
-            \label{fig:vhost-l2sw-3n-skx-x710-64b-2t2c-base-vm-ndr-lat}
+            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-3n-skx-x710-64b-4t2c-base-vm-ndr-lat}
+            \label{fig:vhost-l2sw-3n-skx-x710-64b-4t2c-base-vm-ndr-lat}
     \end{figure}
 
 .. raw:: latex
@@ -952,19 +956,19 @@ CSIT source code for the test cases used for plots can be found in
 
     \clearpage
 
-64b-2t2c-base_and_scale-ip4
+64b-4t2c-base_and_scale-ip4
 ---------------------------
 
 .. raw:: html
 
     <center><b>
 
-:index:`Packet Latency: vhost-ip4-3n-skx-x710-64b-2t2c-base_and_scale-ndr`
+:index:`Packet Latency: vhost-ip4-3n-skx-x710-64b-4t2c-base_and_scale-ndr`
 
 .. raw:: html
 
     </b>
-    <iframe id="ifrm32" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-ip4-3n-skx-x710-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
+    <iframe id="ifrm32" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-ip4-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -973,8 +977,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-ip4-3n-skx-x710-64b-2t2c-base_and_scale-ndr-lat}
-            \label{fig:vhost-ip4-3n-skx-x710-64b-2t2c-base_and_scale-ndr-lat}
+            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-ip4-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:vhost-ip4-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 .. raw:: latex
@@ -1013,19 +1017,19 @@ CSIT source code for the test cases used for plots can be found in
 
     \clearpage
 
-64b-2t2c-base-l2sw
+64b-4t2c-base-l2sw
 ------------------
 
 .. raw:: html
 
     <center><b>
 
-:index:`Packet Latency: vhost-l2sw-2n-skx-x710-64b-2t2c-base-ndr`
+:index:`Packet Latency: vhost-l2sw-2n-skx-x710-64b-4t2c-base-ndr`
 
 .. raw:: html
 
     </b>
-    <iframe id="ifrm34" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-2n-skx-x710-64b-2t2c-base-ndr-lat.html"></iframe>
+    <iframe id="ifrm34" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-2n-skx-x710-64b-4t2c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -1034,8 +1038,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-2n-skx-x710-64b-2t2c-base-ndr-lat}
-            \label{fig:vhost-l2sw-2n-skx-x710-64b-2t2c-base-ndr-lat}
+            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-2n-skx-x710-64b-4t2c-base-ndr-lat}
+            \label{fig:vhost-l2sw-2n-skx-x710-64b-4t2c-base-ndr-lat}
     \end{figure}
 
 .. raw:: latex
@@ -1071,19 +1075,19 @@ CSIT source code for the test cases used for plots can be found in
 
     \clearpage
 
-64b-2t2c-base_and_scale-l2sw
+64b-4t2c-base_and_scale-l2sw
 ----------------------------
 
 .. raw:: html
 
     <center><b>
 
-:index:`Packet Latency: vhost-l2sw-2n-skx-x710-64b-2t2c-base_and_scale-ndr`
+:index:`Packet Latency: vhost-l2sw-2n-skx-x710-64b-4t2c-base_and_scale-ndr`
 
 .. raw:: html
 
     </b>
-    <iframe id="ifrm36" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-2n-skx-x710-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
+    <iframe id="ifrm36" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -1092,8 +1096,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-2n-skx-x710-64b-2t2c-base_and_scale-ndr-lat}
-            \label{fig:vhost-l2sw-2n-skx-x710-64b-2t2c-base_and_scale-ndr-lat}
+            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:vhost-l2sw-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 .. raw:: latex
@@ -1129,19 +1133,19 @@ CSIT source code for the test cases used for plots can be found in
 
     \clearpage
 
-64b-2t2c-base-vm-l2sw
+64b-4t2c-base-vm-l2sw
 ---------------------
 
 .. raw:: html
 
     <center><b>
 
-:index:`Packet Latency: vhost-l2sw-2n-skx-x710-64b-2t2c-base-vm-ndr`
+:index:`Packet Latency: vhost-l2sw-2n-skx-x710-64b-4t2c-base-vm-ndr`
 
 .. raw:: html
 
     </b>
-    <iframe id="ifrm38" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-2n-skx-x710-64b-2t2c-base-vm-ndr-lat.html"></iframe>
+    <iframe id="ifrm38" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-2n-skx-x710-64b-4t2c-base-vm-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -1150,8 +1154,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-2n-skx-x710-64b-2t2c-base-vm-ndr-lat}
-            \label{fig:vhost-l2sw-2n-skx-x710-64b-2t2c-base-vm-ndr-lat}
+            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-2n-skx-x710-64b-4t2c-base-vm-ndr-lat}
+            \label{fig:vhost-l2sw-2n-skx-x710-64b-4t2c-base-vm-ndr-lat}
     \end{figure}
 
 .. raw:: latex
@@ -1187,19 +1191,19 @@ CSIT source code for the test cases used for plots can be found in
 
     \clearpage
 
-64b-2t2c-base_and_scale-ip4
+64b-4t2c-base_and_scale-ip4
 ---------------------------
 
 .. raw:: html
 
     <center><b>
 
-:index:`Packet Latency: vhost-ip4-2n-skx-x710-64b-2t2c-base_and_scale-ndr`
+:index:`Packet Latency: vhost-ip4-2n-skx-x710-64b-4t2c-base_and_scale-ndr`
 
 .. raw:: html
 
     </b>
-    <iframe id="ifrm40" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-ip4-2n-skx-x710-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
+    <iframe id="ifrm40" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-ip4-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -1208,8 +1212,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-ip4-2n-skx-x710-64b-2t2c-base_and_scale-ndr-lat}
-            \label{fig:vhost-ip4-2n-skx-x710-64b-2t2c-base_and_scale-ndr-lat}
+            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-ip4-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:vhost-ip4-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 .. raw:: latex
@@ -1248,19 +1252,19 @@ CSIT source code for the test cases used for plots can be found in
 
     \clearpage
 
-64b-2t2c-base-l2sw
+64b-4t2c-base-l2sw
 ------------------
 
 .. raw:: html
 
     <center><b>
 
-:index:`Packet Latency: vhost-l2sw-2n-skx-xxv710-64b-2t2c-base-ndr`
+:index:`Packet Latency: vhost-l2sw-2n-skx-xxv710-64b-4t2c-base-ndr`
 
 .. raw:: html
 
     </b>
-    <iframe id="ifrm42" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-2n-skx-xxv710-64b-2t2c-base-ndr-lat.html"></iframe>
+    <iframe id="ifrm42" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-2n-skx-xxv710-64b-4t2c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -1269,8 +1273,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-2n-skx-xxv710-64b-2t2c-base-ndr-lat}
-            \label{fig:vhost-l2sw-2n-skx-xxv710-64b-2t2c-base-ndr-lat}
+            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-2n-skx-xxv710-64b-4t2c-base-ndr-lat}
+            \label{fig:vhost-l2sw-2n-skx-xxv710-64b-4t2c-base-ndr-lat}
     \end{figure}
 
 .. raw:: latex
@@ -1306,19 +1310,19 @@ CSIT source code for the test cases used for plots can be found in
 
     \clearpage
 
-64b-2t2c-base_and_scale-l2sw
+64b-4t2c-base_and_scale-l2sw
 ----------------------------
 
 .. raw:: html
 
     <center><b>
 
-:index:`Packet Latency: vhost-l2sw-2n-skx-xxv710-64b-2t2c-base_and_scale-ndr`
+:index:`Packet Latency: vhost-l2sw-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr`
 
 .. raw:: html
 
     </b>
-    <iframe id="ifrm44" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-2n-skx-xxv710-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
+    <iframe id="ifrm44" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -1327,8 +1331,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-2n-skx-xxv710-64b-2t2c-base_and_scale-ndr-lat}
-            \label{fig:vhost-l2sw-2n-skx-xxv710-64b-2t2c-base_and_scale-ndr-lat}
+            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:vhost-l2sw-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 .. raw:: latex
@@ -1364,19 +1368,19 @@ CSIT source code for the test cases used for plots can be found in
 
     \clearpage
 
-64b-2t2c-base-vm-l2sw
+64b-4t2c-base-vm-l2sw
 ---------------------
 
 .. raw:: html
 
     <center><b>
 
-:index:`Packet Latency: vhost-l2sw-2n-skx-xxv710-64b-2t2c-base-vm-ndr`
+:index:`Packet Latency: vhost-l2sw-2n-skx-xxv710-64b-4t2c-base-vm-ndr`
 
 .. raw:: html
 
     </b>
-    <iframe id="ifrm46" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-2n-skx-xxv710-64b-2t2c-base-vm-ndr-lat.html"></iframe>
+    <iframe id="ifrm46" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-2n-skx-xxv710-64b-4t2c-base-vm-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -1385,8 +1389,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-2n-skx-xxv710-64b-2t2c-base-vm-ndr-lat}
-            \label{fig:vhost-l2sw-2n-skx-xxv710-64b-2t2c-base-vm-ndr-lat}
+            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-2n-skx-xxv710-64b-4t2c-base-vm-ndr-lat}
+            \label{fig:vhost-l2sw-2n-skx-xxv710-64b-4t2c-base-vm-ndr-lat}
     \end{figure}
 
 .. raw:: latex
@@ -1422,19 +1426,19 @@ CSIT source code for the test cases used for plots can be found in
 
     \clearpage
 
-64b-2t2c-base_and_scale-ip4
+64b-4t2c-base_and_scale-ip4
 ---------------------------
 
 .. raw:: html
 
     <center><b>
 
-:index:`Packet Latency: vhost-ip4-2n-skx-xxv710-64b-2t2c-base_and_scale-ndr`
+:index:`Packet Latency: vhost-ip4-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr`
 
 .. raw:: html
 
     </b>
-    <iframe id="ifrm48" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-ip4-2n-skx-xxv710-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
+    <iframe id="ifrm48" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-ip4-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -1443,8 +1447,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-ip4-2n-skx-xxv710-64b-2t2c-base_and_scale-ndr-lat}
-            \label{fig:vhost-ip4-2n-skx-xxv710-64b-2t2c-base_and_scale-ndr-lat}
+            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{vhost-ip4-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:vhost-ip4-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 .. raw:: latex

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/container_memif.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/container_memif.rst
index 5789f44..7e48bb4 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/container_memif.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/container_memif.rst
@@ -492,6 +492,10 @@ CSIT source code for the test cases used for plots can be found in
             \label{fig:memif-3n-skx-x710-64b-4t2c-base_and_scale-pdr}
     \end{figure}
 
+.. raw:: latex
+
+    \clearpage
+
 2n-skx-x710
 ~~~~~~~~~~~
 
@@ -601,6 +605,10 @@ CSIT source code for the test cases used for plots can be found in
             \label{fig:memif-2n-skx-x710-64b-4t2c-base_and_scale-pdr}
     \end{figure}
 
+.. raw:: latex
+
+    \clearpage
+
 2n-skx-xxv710
 ~~~~~~~~~~~~~
 

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/container_orchestrated.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/container_orchestrated.rst
index 3b6bdfe..1184362 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/container_orchestrated.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/container_orchestrated.rst
@@ -376,6 +376,10 @@ CSIT source code for the test cases used for plots can be found in
             \label{fig:k8s-memif-3n-hsw-x710-64b-2t2c-base_and_scale-l2xc-pdr}
     \end{figure}
 
+.. raw:: latex
+
+    \clearpage
+
 64b-1t1c-base_and_scale-l2bd
 ----------------------------
 

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst
index 7a818d9..c0ceefe 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst
@@ -158,7 +158,7 @@ CSIT source code for the test cases used for plots can be found in
     \clearpage
 
 64b-1t1c-base_and_features
------------------
+--------------------------
 
 .. raw:: html
 
@@ -213,7 +213,7 @@ CSIT source code for the test cases used for plots can be found in
     \clearpage
 
 64b-2t2c-base_and_features
------------------
+--------------------------
 
 .. raw:: html
 
@@ -384,7 +384,7 @@ CSIT source code for the test cases used for plots can be found in
 ~~~~~~~~~~~
 
 64b-1t1c-base_and_features
------------------
+--------------------------
 
 .. raw:: html
 
@@ -439,7 +439,7 @@ CSIT source code for the test cases used for plots can be found in
     \clearpage
 
 64b-2t2c-base_and_features
------------------
+--------------------------
 
 .. raw:: html
 
@@ -602,8 +602,12 @@ CSIT source code for the test cases used for plots can be found in
             \label{fig:ip4tun-3n-skx-x710-64b-4t2c-base_and_scale-pdr}
     \end{figure}
 
+.. raw:: latex
+
+    \clearpage
+
 64b-2t1c-base_and_features
------------------
+--------------------------
 
 .. raw:: html
 
@@ -658,7 +662,7 @@ CSIT source code for the test cases used for plots can be found in
     \clearpage
 
 64b-4t2c-base_and_features
------------------
+--------------------------
 
 .. raw:: html
 

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst
index 3d61369..31420b6 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst
@@ -156,6 +156,10 @@ CSIT source code for the test cases used for plots can be found in
             \label{fig:ipsec-3n-hsw-xl710-64b-2t2c-base-pdr}
     \end{figure}
 
+.. raw:: latex
+
+    \clearpage
+
 64b-1t1c-scale
 --------------
 
@@ -262,6 +266,10 @@ CSIT source code for the test cases used for plots can be found in
             \label{fig:ipsec-3n-hsw-xl710-64b-2t2c-scale-pdr}
     \end{figure}
 
+.. raw:: latex
+
+    \clearpage
+
 64b-1t1c-sw
 -----------
 

diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_memif.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_memif.rst
index 16d6a74..2c46304 100644 (file)
--- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_memif.rst
+++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_memif.rst
@@ -274,6 +274,10 @@ CSIT source code for the test cases used for plots can be found in
             \label{fig:memif-3n-skx-x710-64b-base_and_scale-pdr-tsa}
     \end{figure}
 
+.. raw:: latex
+
+    \clearpage
+
 2n-skx-x710
 ~~~~~~~~~~~
 
@@ -328,6 +332,10 @@ CSIT source code for the test cases used for plots can be found in
             \label{fig:memif-2n-skx-x710-64b-base_and_scale-pdr-tsa}
     \end{figure}
 
+.. raw:: latex
+
+    \clearpage
+
 2n-skx-xxv710
 ~~~~~~~~~~~~~
 

diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_orchestrated.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_orchestrated.rst
index 604b070..c125eb7 100644 (file)
--- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_orchestrated.rst
+++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_orchestrated.rst
@@ -213,6 +213,10 @@ CSIT source code for the test cases used for plots can be found in
             \label{fig:k8s-memif-3n-hsw-x710-64b-base_and_scale-l2xc-pdr-tsa}
     \end{figure}
 
+.. raw:: latex
+
+    \clearpage
+
 64b-base_and_scale-l2bd
 -----------------------
 

diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst
index f62c910..f495665 100644 (file)
--- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst
+++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst
@@ -102,6 +102,10 @@ CSIT source code for the test cases used for plots can be found in
             \label{fig:ipsec-3n-hsw-xl710-64b-base-pdr-tsa}
     \end{figure}
 
+.. raw:: latex
+
+    \clearpage
+
 64b-hw-scale
 ------------
 
@@ -153,6 +157,10 @@ CSIT source code for the test cases used for plots can be found in
             \label{fig:ipsec-3n-hsw-xl710-64b-scale-pdr-tsa}
     \end{figure}
 
+.. raw:: latex
+
+    \clearpage
+
 64b-sw-base
 -----------
 

diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/vm_vhost.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/vm_vhost.rst
index e8c03ee..4eeb3ef 100644 (file)
--- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/vm_vhost.rst
+++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/vm_vhost.rst
@@ -711,6 +711,10 @@ CSIT source code for the test cases used for plots can be found in
             \label{fig:vhost-ip4-3n-hsw-xl710-64b-base_and_scale-pdr-tsa}
     \end{figure}
 
+.. raw:: latex
+
+    \clearpage
+
 3n-skx-x710
 ~~~~~~~~~~~
 

diff --git a/resources/tools/presentation/generator_plots.py b/resources/tools/presentation/generator_plots.py
index a488bdf..51b2940 100644 (file)
--- a/resources/tools/presentation/generator_plots.py
+++ b/resources/tools/presentation/generator_plots.py
@@ -437,7 +437,11 @@ def plot_throughput_speedup_analysis(plot, input_data):
             vals[name]["diff"] = \
                 [(y_val_1 - y_1c_max[test_name]) * 100 / y_val_1, None, None]
 
-            val_max = max(max(vals[name]["val"], vals[name]["ideal"]))
+            try:
+                val_max = max(max(vals[name]["val"], vals[name]["ideal"]))
+            except ValueError as err:
+                logging.error(err)
+                continue
             if val_max:
                 y_max.append(int((val_max / 10) + 1) * 10)
 
@@ -502,8 +506,11 @@ def plot_throughput_speedup_analysis(plot, input_data):
     x_vals = [1, 2, 4]
 
     # Limits:
-    threshold = 1.1 * max(y_max)  # 10%
-
+    try:
+        threshold = 1.1 * max(y_max)  # 10%
+    except ValueError as err:
+        logging.error(err)
+        return
     nic_limit /= 1000000.0
     if nic_limit < threshold:
         traces.append(plgo.Scatter(

diff --git a/resources/tools/presentation/specification.yaml b/resources/tools/presentation/specification.yaml
index b0f65a3..43170fb 100644 (file)
--- a/resources/tools/presentation/specification.yaml
+++ b/resources/tools/presentation/specification.yaml
@@ -9738,7 +9738,7 @@
            '78B' and
            ('IP6BASE' or 'FIB_20K' or 'FIB_200K' or 'FIB_2M') and
            'NDRPDR' and
-           '4T12' and
+           '4T2C' and
            'IP6FWD' and
            not 'SRv6' and
            not 'IPSEC' and