"""
raise NotImplementedError("Not supported in VPP.")
+
+
+class IPv6NDProxyKeywords(object):
+ """Keywords for IPv6 Neighbor Discovery proxy configuration."""
+
+ def __init__(self):
+ pass
+
+ @staticmethod
+ def configure_ipv6nd(node, interface, addresses=None):
+ """Configure IPv6 Neighbor Discovery proxy on the specified interface,
+ or remove/replace an existing configuration.
+
+ :param node: Honeycomb node.
+ :param interface: Name of an interface on the node.
+ :param addresses: IPv6 addresses to configure ND proxy with. If no
+ address is provided, ND proxy configuration will be removed.
+ :type node: dict
+ :type interface: str
+ :type addresses: list
+ :returns: Content of response.
+ :rtype: bytearray
+ :raises HoneycombError: If the operation fails.
+ """
+
+ interface = Topology.convert_interface_reference(
+ node, interface, "name")
+ interface = interface.replace("/", "%2F")
+
+ path = "/interface/{0}/ietf-ip:ipv6/nd-proxies".format(interface)
+
+ if addresses is None:
+ status_code, resp = HcUtil. \
+ delete_honeycomb_data(node, "config_vpp_interfaces", path)
+ else:
+ data = {
+ "nd-proxies": {
+ "nd-proxy": [{"address": x} for x in addresses]
+ }
+ }
+
+ status_code, resp = HcUtil. \
+ put_honeycomb_data(node, "config_vpp_interfaces", data, path,
+ data_representation=DataRepresentation.JSON)
+
+ if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
+ raise HoneycombError(
+ "IPv6 ND proxy configuration unsuccessful. "
+ "Status code: {0}.".format(status_code))
+ else:
+ return resp
+
+ @staticmethod
+ def get_ipv6nd_configuration(node, interface):
+ """Read IPv6 Neighbor Discovery proxy configuration on the specified
+ interface.
+
+ :param node: Honeycomb node.
+ :param interface: Name of an interface on the node.
+ :type node: dict
+ :type interface: str
+ :returns: Content of response.
+ :rtype: bytearray
+ :raises HoneycombError: If the configuration could not be read.
+ """
+
+ interface = Topology.convert_interface_reference(
+ node, interface, "name")
+ interface = interface.replace("/", "%2F")
+
+ path = "/interface/{0}/ietf-ip:ipv6/nd-proxies".format(interface)
+
+ status_code, resp = HcUtil.get_honeycomb_data(
+ node, "config_vpp_interfaces", path)
+ if status_code != HTTPCodes.OK:
+ raise HoneycombError(
+ "Could not read IPv6 ND proxy configuration. "
+ "Status code: {0}.".format(status_code))
+ else:
+ return resp
# limitations under the License.
*** Settings ***
-| Library | resources.libraries.python.honeycomb.proxyARP.ProxyARPKeywords
-| Documentation | Keywords used to test Honeycomb proxyARP.
+| Library | resources.libraries.python.honeycomb.proxyARP.IPv6NDProxyKeywords
+| Documentation | Keywords used to test Honeycomb ARP proxy and IPv6ND proxy.
*** Keywords ***
| Honeycomb configures proxyARP
| | ...
| | ... | \| Honeycomb enables proxyARP on interface \| ${nodes['DUT1']} \
| | ... | \| GigabitEthernet0/8/0 \|
+| | ...
| | [Arguments] | ${node} | ${interface}
| | Set proxyARP interface config | ${node} | ${interface} | enable
| | ... | \| GigabitEthernet0/8/0 \|
| | [Arguments] | ${node} | ${interface}
| | Set proxyARP interface config | ${node} | ${interface} | disable
+
+| Honeycomb configures IPv6 ND proxy on interface
+| | [Documentation] | Uses Honeycomb API to enable the IPv6 ND proxy\
+| | ... | feature on an interface.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface on the node. Type: string
+| | ... | - addresses - one or more addresses to configure ND proxy with.\
+| | ... | Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb configures IPv6 ND proxy on interface \
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 10::10 \| 10::11 \|
+| | ...
+| | [Arguments] | ${node} | ${interface} | @{addresses}
+| | Configure IPv6ND | ${node} | ${interface} | ${addresses}
+
+| Honeycomb disables IPv6 ND proxy on interface
+| | [Documentation] | Uses Honeycomb API to disable the IPv6 ND proxy\
+| | ... | feature on an interface.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface on the node. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb disables IPv6 ND proxy on interface \| ${nodes['DUT1']} \
+| | ... | \| GigabitEthernet0/8/0 \|
+| | [Arguments] | ${node} | ${interface}
+| | Configure IPv6ND | ${node} | ${interface}
+
+| IPv6 ND proxy from Honeycomb should be
+| | [Documentation] | Retrieves IPv6 ND proxy operational data and compares\
+| | ... | with expected values.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface on the node. Type: string
+| | ... | - addresses - one or more addresses to expect. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| IPv6 ND proxy from Honeycomb should be \| ${nodes['DUT1']} \
+| | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 10::11 \|
+| | ...
+| | [Arguments] | ${node} | ${interface} | @{addresses}
+| | ${oper_data}= | Get interface oper data | ${node} | ${interface}
+| | ${oper_data}= | Set Variable
+| | ... | ${oper_data['ietf-ip:ipv6']['nd-proxy:nd-proxies']['nd-proxy']}
+| | ${data}= | Evaluate | [{"address":x} for x in $addresses]
+| | Sort List | ${oper_data}
+| | Sort List | ${data}
+| | Should be equal | ${oper_data} | ${data}
+
+| IPv6 ND proxy from Honeycomb should be empty
+| | [Documentation] | Retrieves IPv6 ND proxy operational data and expects\
+| | ... | to fail due to no data present.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface on the node. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \|IPv6 ND proxy from Honeycomb should be empty \| ${nodes['DUT1']} \
+| | ... | \| GigabitEthernet0/8/0 \|
+| | ...
+| | [Arguments] | ${node} | ${interface}
+| | ${oper_data}= | Get interface oper data | ${node} | ${interface}
+| | Variable Should Not Exist
+| | ... | ${oper_data['ietf-ip:ipv6']['nd-proxy:nd-proxies']['nd-proxy']}
+
+| Verify IPv6ND Proxy
+| | [Documentation] | Send and receive ICMPv6 messages between TG interfaces
+| | ... | through Neighbor Discovery proxy.
+| | ...
+| | ... | *Arguments:*
+| | ... | - tg_node - TG node. Type: dictionary
+| | ... | - tg_interface1 - TG interface. Type: string
+| | ... | - tg_interface2 - TG interface. Type: string
+| | ... | - src_ip - Source IPv6 address to use. Type: string
+| | ... | - dst_ip - Destination IPv6 address to use. Type: string
+| | ... | - src_mac - MAC address of source interface. Type: string
+| | ... | - dst_mac - MAC address of destination interface. Type: string
+| | ... | - proxy_to_src_mac - MAC address of DUT interface on link to source\
+| | ... | TG interface. Type: string
+| | ... | - proxy_to_dst_mac - MAC address of DUT interface on link to dest\
+| | ... | TG interface. Type: string
+| | ...
+| | ... | *Return:*
+| | ... | - No value returned.
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Verify IPv6ND Proxy \| ${nodes['TG']} \
+| | ... | \| eth3 \| eth4 \| 3ffe:62::1 \| 3ffe:63::2 \
+| | ... | \| 08:00:27:cc:4f:54 \| 08:00:27:64:18:d2 \
+| | ... | \| 08:00:27:c9:6a:d5 \| 08:00:27:c4:75:3a \|
+| | ...
+| | [Arguments] | ${tg_node} | ${tg_interface1} | ${tg_interface2}
+| | ... | ${src_ip} | ${dst_ip} | ${src_mac} | ${dst_mac}
+| | ... | ${proxy_to_src_mac} | ${proxy_to_dst_mac}
+| | ${tg_interface_name1}= | Get interface name | ${tg_node} | ${tg_interface1}
+| | ${tg_interface_name2}= | Get interface name | ${tg_node} | ${tg_interface2}
+| | ${args}= | Catenate | --tx_if | ${tg_interface_name1}
+| | ... | --rx_if | ${tg_interface_name2}
+| | ... | --src_ip | ${src_ip}
+| | ... | --dst_ip | ${dst_ip}
+| | ... | --src_mac | ${src_mac}
+| | ... | --dst_mac | ${dst_mac}
+| | ... | --proxy_to_src_mac | ${proxy_to_src_mac}
+| | ... | --proxy_to_dst_mac | ${proxy_to_dst_mac}
+| | Run Traffic Script On Node | ipv6_nd_proxy_check.py
+| | ... | ${tg_node} | ${args}
--- /dev/null
+#!/usr/bin/env python
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Traffic script that sends DHCPv6 proxy packets."""
+
+from scapy.layers.inet import Ether
+from scapy.layers.inet6 import IPv6, ICMPv6EchoRequest, ICMPv6EchoReply,\
+ ICMPv6ND_NS
+
+from resources.libraries.python.PacketVerifier import RxQueue, TxQueue
+from resources.libraries.python.TrafficScriptArg import TrafficScriptArg
+
+
+def imcpv6nd_solicit(tx_if, src_mac, dst_mac, src_ip, dst_ip):
+ """Send ICMPv6 Neighbor Solicitation packet and expect a response
+ from the proxy.
+
+ :param tx_if: Interface on TG.
+ :param src_mac: MAC address of TG interface.
+ :param dst_mac: MAC address of proxy interface.
+ :param src_ip: IP address of TG interface.
+ :param dst_ip: IP address of proxied interface.
+ :type tx_if: str
+ :type src_mac: str
+ :type dst_mac: str
+ :type src_ip: str
+ :type dst_ip: str
+ :raises RuntimeError: If the received packet is not correct.
+ """
+
+ rxq = RxQueue(tx_if)
+ txq = TxQueue(tx_if)
+
+ sent_packets = []
+
+ icmpv6nd_solicit_pkt =\
+ Ether(src=src_mac, dst=dst_mac) / \
+ IPv6(src=src_ip) / \
+ ICMPv6ND_NS(tgt=dst_ip)
+
+ sent_packets.append(icmpv6nd_solicit_pkt)
+ txq.send(icmpv6nd_solicit_pkt)
+
+ ether = None
+ for _ in range(5):
+ pkt = rxq.recv(3, ignore=sent_packets)
+ if pkt is not None:
+ ether = pkt
+ break
+
+ if ether is None:
+ raise RuntimeError('ICMPv6ND Proxy response timeout.')
+
+ if ether.src != dst_mac:
+ raise RuntimeError("Source MAC address error: {} != {}".format(
+ ether.src, dst_mac))
+ print "Source MAC address: OK."
+
+ if ether.dst != src_mac:
+ raise RuntimeError("Destination MAC address error: {} != {}".format(
+ ether.dst, src_mac))
+ print "Destination MAC address: OK."
+
+ if ether['IPv6'].src != dst_ip:
+ raise RuntimeError("Source IP address error: {} != {}".format(
+ ether['IPv6'].src, dst_ip))
+ print "Source IP address: OK."
+
+ if ether['IPv6'].dst != src_ip:
+ raise RuntimeError("Destination IP address error: {} != {}".format(
+ ether['IPv6'].dst, src_ip))
+ print "Destination IP address: OK."
+
+ try:
+ target_addr = ether['IPv6']\
+ ['ICMPv6 Neighbor Discovery - Neighbor Advertisement'].tgt
+ except (KeyError, AttributeError):
+ raise RuntimeError("Not an ICMPv6ND Neighbor Advertisement packet.")
+
+ if target_addr != dst_ip:
+ raise RuntimeError("ICMPv6 field 'Target address' error:"
+ " {} != {}".format(target_addr, dst_ip))
+ print "Target address field: OK."
+
+
+def ipv6_ping(src_if, dst_if, src_mac, dst_mac,
+ proxy_to_src_mac, proxy_to_dst_mac, src_ip, dst_ip):
+ """Sends ICMPv6 Echo Request, receive it and send a reply.
+
+ :param src_if: First TG interface on link to DUT.
+ :param dst_if: Second TG interface on link to DUT.
+ :param src_mac: MAC address of first interface.
+ :param dst_mac: MAC address of second interface.
+ :param proxy_to_src_mac: MAC address of first proxy interface on DUT.
+ :param proxy_to_dst_mac: MAC address of second proxy interface on DUT.
+ :param src_ip: IP address of first interface.
+ :param dst_ip: IP address of second interface.
+ :type src_if: str
+ :type dst_if: str
+ :type src_mac: str
+ :type dst_mac: str
+ :type proxy_to_src_mac: str
+ :type proxy_to_dst_mac: str
+ :type src_ip: str
+ :type dst_ip: str
+ :raises RuntimeError: If a received packet is not correct.
+ """
+ rxq = RxQueue(dst_if)
+ txq = TxQueue(src_if)
+
+ icmpv6_ping_pkt = \
+ Ether(src=src_mac, dst=proxy_to_src_mac) / \
+ IPv6(src=src_ip, dst=dst_ip) / \
+ ICMPv6EchoRequest()
+
+ txq.send(icmpv6_ping_pkt)
+
+ ether = None
+ for _ in range(5):
+ pkt = rxq.recv(3)
+ if pkt is not None:
+ ether = pkt
+ break
+
+ if ether is None:
+ raise RuntimeError('ICMPv6 Echo Request timeout.')
+ try:
+ ether["IPv6"]["ICMPv6 Echo Request"]
+ except KeyError:
+ raise RuntimeError("Received packet is not an ICMPv6 Echo Request.")
+ print "ICMP Echo: OK."
+
+ rxq = RxQueue(src_if)
+ txq = TxQueue(dst_if)
+
+ icmpv6_ping_pkt = \
+ Ether(src=dst_mac, dst=proxy_to_dst_mac) / \
+ IPv6(src=dst_ip, dst=src_ip) / \
+ ICMPv6EchoReply()
+
+ txq.send(icmpv6_ping_pkt)
+
+ ether = None
+ for _ in range(5):
+ pkt = rxq.recv(3)
+ if pkt is not None:
+ ether = pkt
+ break
+
+ if ether is None:
+ raise RuntimeError('DHCPv6 SOLICIT timeout')
+ try:
+ ether["IPv6"]["ICMPv6 Echo Reply"]
+ except KeyError:
+ raise RuntimeError("Received packet is not an ICMPv6 Echo Reply.")
+
+ print "ICMP Reply: OK."
+
+
+def main():
+ """Send DHCPv6 proxy messages."""
+
+ args = TrafficScriptArg(['src_ip', 'dst_ip', 'src_mac', 'dst_mac',
+ 'proxy_to_src_mac', 'proxy_to_dst_mac'])
+
+ src_if = args.get_arg('tx_if')
+ dst_if = args.get_arg('rx_if')
+ src_ip = args.get_arg("src_ip")
+ dst_ip = args.get_arg("dst_ip")
+ src_mac = args.get_arg('src_mac')
+ dst_mac = args.get_arg('dst_mac')
+ proxy_to_src_mac = args.get_arg('proxy_to_src_mac')
+ proxy_to_dst_mac = args.get_arg('proxy_to_dst_mac')
+
+ # Neighbor solicitation
+ imcpv6nd_solicit(src_if, src_mac, proxy_to_src_mac, src_ip, dst_ip)
+
+ # Verify route (ICMP echo/reply)
+ ipv6_ping(src_if, dst_if, src_mac, dst_mac,
+ proxy_to_src_mac, proxy_to_dst_mac, src_ip, dst_ip)
+
+if __name__ == "__main__":
+ main()
| Suite Teardown
| ... | Run Keyword If Any Tests Failed
| ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
-| Force Tags | honeycomb_sanity | honeycomb_test
+| Force Tags | honeycomb_sanity
| Documentation | *Honeycomb proxyARP management test suite.*
*** Test Cases ***
--- /dev/null
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Variables ***
+# Interface to run configuration tests on.
+| ${interface}= | ${node['interfaces']['port1']['name']}
+# IPv6 addresses to configure on DUT.
+| ${dut_to_tg_if1_ip}= | 10::1
+| ${dut_to_tg_if2_ip}= | 11::1
+# IPv6 addresses used for TG interfaces.
+| ${test_src_ip}= | 10::2
+| ${test_dst_ip}= | 11::2
+| ${test_dst_ip2}= | 11::3
+# IPv6 subnet prefix length
+| ${prefix_length}= | 64
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
+| Resource | resources/libraries/robot/honeycomb/interfaces.robot
+| Resource | resources/libraries/robot/honeycomb/proxyarp.robot
+| Resource | resources/libraries/robot/testing_path.robot
+| Resource | resources/libraries/robot/ipv6.robot
+| Resource | resources/libraries/robot/traffic.robot
+| Resource | resources/libraries/robot/dhcp_proxy.robot
+| Library | resources.libraries.python.Trace
+| Test Setup | Clear Packet Trace on All DUTs | ${nodes}
+| Suite Teardown | Restart Honeycomb And VPP | ${node}
+| Force Tags | honeycomb_sanity | honeycomb_test
+| Documentation | *Honeycomb IPv6 neighbor discovery proxy test suite.*
+
+*** Test Cases ***
+| TC01: Honeycomb can configure IPv6 ND proxy on an interface
+| | [Documentation] | Check if Honeycomb can configure the IPv6 ND proxy\
+| | ... | feature on an interface.
+| | Given IPv6 ND proxy from Honeycomb should be empty | ${node} | ${interface}
+| | And Honeycomb sets interface state | ${node} | ${interface} | up
+| | When Honeycomb configures IPv6 ND proxy on interface
+| | ... | ${node} | ${interface} | ${test_dst_ip}
+| | Then IPv6 ND proxy from Honeycomb should be
+| | ... | ${node} | ${interface} | ${test_dst_ip}
+
+| TC02: Honeycomb can disable IPv6 ND proxy on an interface
+| | [Documentation] | Check if Honeycomb can remove IPv6 ND proxy feature\
+| | ... | configuration from an interface.
+| | Given IPv6 ND proxy from Honeycomb should be
+| | ... | ${node} | ${interface} | ${test_dst_ip}
+| | When Honeycomb disables IPv6 ND proxy on interface | ${node} | ${interface}
+| | Then IPv6 ND proxy from Honeycomb should be empty | ${node} | ${interface}
+
+| TC03: Honeycomb can configure multiple IPv6 ND proxies on an interface
+| | [Documentation] | Check if Honeycomb can configure two ND proxies\
+| | ... | on one interface.
+| | [Teardown] | Honeycomb disables IPv6 ND proxy on interface
+| | ... | ${node} | ${interface}
+| | Given IPv6 ND proxy from Honeycomb should be empty | ${node} | ${interface}
+| | And Honeycomb sets interface state | ${node} | ${interface} | up
+| | When Honeycomb configures IPv6 ND proxy on interface
+| | ... | ${node} | ${interface} | ${test_dst_ip} | ${test_dst_ip2}
+| | Then IPv6 ND proxy from Honeycomb should be
+| | ... | ${node} | ${interface} | ${test_dst_ip} | ${test_dst_ip2}
+
+| TC04: VPP proxies valid ICMPv6 Neighbor Discovery request
+| | [Documentation] |
+| | ... | [Top] TG=DUT
+| | ... | [Cfg] On DUT configure IPv6 addresses and neighbors, supress router\
+| | ... | advertisement and configure IPv6 Neighbor Discovery proxy.
+| | ... | [Ver] Make TG send a neighbor solicitation packet to it's other\
+| | ... | interface through DUT, verify DUT responds to the packet instead\
+| | ... | of forwarding it. Then exchange ICMPv6 Echo request/reply to verify\
+| | ... | connectivity between interfaces.
+| | ... | [Ref] RFC 4389
+| | ...
+| | [Teardown] | Run Keywords
+| | ... | Show Packet Trace on All DUTs | ${nodes} | AND
+| | ... | Honeycomb disables IPv6 ND proxy on interface
+| | ... | ${dut_node} | ${dut_to_tg_if2}
+| | Given Path for 2-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up
+| | Honeycomb sets interface ipv6 address | ${dut_node}
+| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length}
+| | Honeycomb sets interface ipv6 address | ${dut_node}
+| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length}
+| | And Vpp Ra Suppress Link Layer | ${dut_node} | ${dut_to_tg_if1}
+| | And Vpp Ra Suppress Link Layer | ${dut_node} | ${dut_to_tg_if2}
+| | And Honeycomb adds interface ipv6 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | ... | ${test_src_ip} | ${tg_to_dut_if1_mac}
+| | And Honeycomb adds interface ipv6 neighbor | ${dut_node} | ${dut_to_tg_if2}
+| | ... | ${test_dst_ip} | ${tg_to_dut_if2_mac}
+| | When Honeycomb configures IPv6 ND proxy on interface
+| | ... | ${dut_node} | ${dut_to_tg_if2} | ${test_dst_ip}
+| | Then Verify IPv6ND Proxy | ${tg_node}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2}
+| | ... | ${test_src_ip} | ${test_dst_ip}
+| | ... | ${tg_to_dut_if1_mac} | ${tg_to_dut_if2_mac}
+| | ... | ${dut_to_tg_if1_mac} | ${dut_to_tg_if2_mac}
Code Review / csit.git / commitdiff