exit ${retval}
fi
-if [[ ! "${VIRL_SID}" =~ session-[a-zA-Z0-9]{6} ]]; then
+if [[ ! "${VIRL_SID}" =~ session-[a-zA-Z0-9_]{6} ]]; then
echo "No VIRL session ID reported."
exit 127
fi
PYTHONPATH=`pwd` pybot -L TRACE \
-v TOPOLOGY_PATH:topologies/enabled/topology.yaml \
- --include vm_env \
- --include 3_NODE_SINGLE_LINK_TOPO \
--exclude 3_node_double_link_topoNOT3_node_single_link_topo \
+ --include VM_ENV \
--exclude PERFTEST \
--noncritical EXPECTED_FAILING \
tests/
cmd = 'ip link set {} {}'.format(interface, state)
exec_cmd_no_error(node, cmd, sudo=True)
else:
- raise Exception('Unknown NodeType: "{}"'.format(node['type']))
+ raise Exception('Node {} has unknown NodeType: "{}"'.
+ format(node['host'], node['type']))
+
+ @staticmethod
+ def set_interface_ethernet_mtu(node, interface, mtu):
+ """Set Ethernet MTU for specified interface.
+
+ Function can be used only for TGs.
+
+ :param node: node where the interface is
+ :param interface: interface name
+ :param mtu: MTU to set
+ :type node: dict
+ :type interface: str
+ :type mtu: int
+ :return: nothing
+ """
+ if node['type'] == NodeType.DUT:
+ ValueError('Node {}: Setting Ethernet MTU for interface '
+ 'on DUT nodes not supported', node['host'])
+ elif node['type'] == NodeType.TG:
+ cmd = 'ip link set {} mtu {}'.format(interface, mtu)
+ exec_cmd_no_error(node, cmd, sudo=True)
+ else:
+ raise ValueError('Node {} has unknown NodeType: "{}"'.
+ format(node['host'], node['type']))
+
+ @staticmethod
+ def set_default_ethernet_mtu_on_all_interfaces_on_node(node):
+ """Set default Ethernet MTU on all interfaces on node.
+
+ Function can be used only for TGs.
+
+ :param node: node where to set default MTU
+ :type node: dict
+ :return: nothing
+ """
+ for ifc in node['interfaces'].values():
+ InterfaceUtil.set_interface_ethernet_mtu(node, ifc['name'], 1500)
@staticmethod
def vpp_node_interfaces_ready_wait(node, timeout=10):
--- /dev/null
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+from resources.libraries.python.VatExecutor import VatExecutor
+from resources.libraries.python.topology import NodeType
+
+class Trace(object):
+
+ @staticmethod
+ def show_packet_trace_on_all_duts(nodes):
+ for node in nodes.values():
+ if node['type'] == NodeType.DUT:
+ vat = VatExecutor()
+ vat.execute_script("show_trace.vat", node, json_out=False)
format(ifc, if_mac))
ifc['name'] = interface_dict["interface_name"]
ifc['vpp_sw_index'] = interface_dict["sw_if_index"]
+ ifc['mtu'] = interface_dict["mtu"]
def update_vpp_interface_data_on_node(self, node):
"""Update vpp generated interface data for a given node in DICT__nodes
"""
for port in node['interfaces'].values():
port_name = port.get('name')
- if port_name is None:
- continue
if port_name == interface:
return port.get('vpp_sw_index')
return None
+ @staticmethod
+ def get_interface_mtu(node, interface):
+ """Get interface MTU.
+
+ Returns physical layer MTU (max. size of Ethernet frame).
+ :param node: Node to get interface MTU on.
+ :param interface: Interface name.
+ :type node: dict
+ :type interface: str
+ :return: MTU or None if not found.
+ :rtype: int
+ """
+ for port in node['interfaces'].values():
+ port_name = port.get('name')
+ if port_name == interface:
+ return port.get('mtu')
+
+ return None
+
@staticmethod
def get_interface_mac_by_port_key(node, port_key):
"""Get MAC address for the interface based on port key.
"""
for port in node['interfaces'].values():
port_name = port.get('name')
- if port_name is None:
- continue
if port_name == interface:
return port.get('mac_address')
# See the License for the specific language governing permissions and
# limitations under the License.
*** Settings ***
+| Library | resources.libraries.python.InterfaceUtil
+| Library | resources.libraries.python.NodePath
| Resource | resources/libraries/robot/vat/interfaces.robot
*** Keywords ***
| | VPP reports interfaces through VAT on | ${node}
#| | VPP reports interfaces through ODL on | ${node}
#| | VPP reports interfaces through DEBUGCLI on | ${node}
+
+| Setup MTU on TG based on MTU on DUT
+| | [Documentation] | Type of the tg_node must be TG and dut_node must be DUT
+| | [Arguments] | ${tg_node} | ${dut_node}
+| | Append Nodes | ${tg_node} | ${dut_node}
+| | Compute Path
+| | ${tg_port} | ${tg_node}= | First Interface
+| | ${dut_port} | ${dut_node}= | Last Interface
+| | # get physical layer MTU (max. size of Ethernet frame)
+| | ${mtu}= | Get Interface MTU | ${dut_node} | ${dut_port}
+| | # Ethernet MTU is physical layer MTU minus size of Ethernet header and FCS
+| | ${eth_mtu}= | Evaluate | ${mtu} - 14 - 4
+| | Set Interface Ethernet MTU | ${tg_node} | ${tg_port} | ${eth_mtu}
| Ipv4 icmp echo sweep
| | [Documentation] | Type of the src_node must be TG and dst_node must be DUT
-| | [Arguments] | ${src_node} | ${dst_node} | ${src_port} | ${dst_port}
+| | [Arguments] | ${src_node} | ${dst_node} | ${start_size} | ${end_size} | ${step}
+| | Append Nodes | ${src_node} | ${dst_node}
+| | Compute Path
+| | ${src_port} | ${src_node}= | First Interface
+| | ${dst_port} | ${dst_node}= | Last Interface
| | ${src_ip}= | Get IPv4 address of node "${src_node}" interface "${src_port}" from "${nodes_ipv4_addr}"
| | ${dst_ip}= | Get IPv4 address of node "${dst_node}" interface "${dst_port}" from "${nodes_ipv4_addr}"
| | ${src_mac}= | Get Interface Mac | ${src_node} | ${src_port}
| | ${dst_mac}= | Get Interface Mac | ${dst_node} | ${dst_port}
| | ${args}= | Traffic Script Gen Arg | ${src_port} | ${src_port} | ${src_mac}
| | | ... | ${dst_mac} | ${src_ip} | ${dst_ip}
-| # TODO: end_size is currently minimum MTU size for Ethernet minus IPv4 and
-| # ICMP echo header size (1500 - 20 - 8),
-| # MTU info is not in VAT sw_interface_dump output
-| | ${args}= | Set Variable | ${args} --start_size 1 --end_size 1472 --step 1
-| | Run Traffic Script On Node | ipv4_sweep_ping.py | ${src_node} | ${args}
+| | ${args}= | Set Variable
+| | ... | ${args} --start_size ${start_size} --end_size ${end_size} --step ${step}
+| | Run Traffic Script On Node | ipv4_sweep_ping.py | ${src_node} | ${args} | ${20}
| Send ARP request and validate response
| | [Arguments] | ${tg_node} | ${vpp_node}
"""IPv6 keywords"""
*** Settings ***
-| Library | resources/libraries/python/IPv6Util.py
-| Library | resources/libraries/python/IPv6Setup.py
-| Library | resources/libraries/python/TrafficScriptExecutor.py
-| Library | resources/libraries/python/NodePath.py
-| Library | resources/libraries/python/Routing.py
-| Library | resources/libraries/python/InterfaceUtil.py
+| Library | resources.libraries.python.IPv6Util
+| Library | resources.libraries.python.IPv6Setup
+| Library | resources.libraries.python.TrafficScriptExecutor
+| Library | resources.libraries.python.NodePath
+| Library | resources.libraries.python.Routing
+| Library | resources.libraries.python.InterfaceUtil
| Library | resources.libraries.python.topology.Topology
| Resource | resources/libraries/robot/default.robot
| Resource | resources/libraries/robot/counters.robot
| | Run Traffic Script On Node | icmpv6_echo.py | ${tg_node} | ${args}
| | Vpp dump stats | ${dst_node}
| | ${ipv6_counter}= | Vpp get interface ipv6 counter | ${dst_node} | ${dst_port}
-| | Should Be Equal | ${ipv6_counter} | ${2} | #ICMPv6 neighbor advertisment + ICMPv6 echo request
+| | Should Be Equal | ${ipv6_counter} | ${2} | #ICMPv6 neighbor advertisement + ICMPv6 echo request
| Ipv6 icmp echo sweep
| | [Documentation] | Type of the src_node must be TG and dst_node must be DUT
-| | [Arguments] | ${tg_node} | ${dut_node} | ${nodes_addr}
-| | Append Nodes | ${tg_node} | ${dut_node}
+| | [Arguments] | ${src_node} | ${dst_node} | ${start_size} | ${end_size}
+| | ... | ${step} | ${nodes_addr}
+| | Append Nodes | ${src_node} | ${dst_node}
| | Compute Path
| | ${src_port} | ${src_node}= | First Interface
| | ${dst_port} | ${dst_node}= | Last Interface
| | ${dst_mac}= | Get Interface Mac | ${dst_node} | ${dst_port}
| | ${args}= | Traffic Script Gen Arg | ${src_port} | ${src_port} | ${src_mac}
| | | ... | ${dst_mac} | ${src_ip} | ${dst_ip}
-| # TODO: end_size is currently minimum MTU size for IPv6 minus IPv6 and ICMPv6
-| # echo header size, MTU info is not in VAT sw_interface_dump output
-| | ${args}= | Set Variable | ${args} --start_size 0 --end_size 1232 --step 1
-| | Run Traffic Script On Node | ipv6_sweep_ping.py | ${tg_node} | ${args} | ${20}
+| | ${args}= | Set Variable
+| | ... | ${args} --start_size ${start_size} --end_size ${end_size} --step ${step}
+| | Run Traffic Script On Node | ipv6_sweep_ping.py | ${src_node} | ${args} | ${20}
| Ipv6 tg to dut1 egress
| | [Documentation] | Send traffic from TG to first DUT egress interface
--- /dev/null
+exec show trace
import os
logging.getLogger("scapy.runtime").setLevel(logging.ERROR)
from resources.libraries.python.PacketVerifier import RxQueue, TxQueue,\
- auto_pad, create_gratuitous_arp_request, checksum_equal
+ create_gratuitous_arp_request, checksum_equal
from resources.libraries.python.TrafficScriptArg import TrafficScriptArg
from scapy.layers.inet import IP, ICMP
from scapy.all import Ether, Raw
# send ICMP echo request with incremented data length and receive ICMP
# echo reply
for echo_seq in range(start_size, end_size+1, step):
- pkt_send = auto_pad(Ether(src=src_mac, dst=dst_mac) /
- IP(src=src_ip, dst=dst_ip) /
- ICMP(id=echo_id, seq=echo_seq) /
- Raw(load=data[0:echo_seq]))
+ pkt_send = (Ether(src=src_mac, dst=dst_mac) /
+ IP(src=src_ip, dst=dst_ip) /
+ ICMP(id=echo_id, seq=echo_seq) /
+ Raw(load=data[0:echo_seq]))
sent_packets.append(pkt_send)
txq.send(pkt_send)
if 'Raw' in icmpv4:
load = icmpv4['Raw'].load
else:
- load = []
+ load = ""
if load != data[0:echo_seq]:
raise RuntimeError(
'Received ICMP payload does not match sent payload')
*** Settings ***
| Library | resources.libraries.python.topology.Topology
| Library | resources.libraries.python.NodePath
+| Library | resources.libraries.python.Trace
| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/interfaces.robot
| Resource | resources/libraries/robot/ipv4.robot
-| Force Tags | HW_ENV | VM_ENV
+| Force Tags | HW_ENV
| Suite Setup | Run Keywords | Setup all DUTs before test
| ... | AND | Setup all TGs before traffic script
| ... | AND | Update All Interface Data On All Nodes | ${nodes}
| ... | AND | Setup DUT nodes for IPv4 testing
| Test Setup | Clear interface counters on all vpp nodes in topology | ${nodes}
+| Test Teardown | Run Keyword If Test Failed | Show packet trace on all DUTs | ${nodes}
*** Test Cases ***
| VPP replies to ICMPv4 echo request
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']}
| | Compute Path
| | ${src_port} | ${src_node}= | First Interface
| | Node "${src_node}" interface "${src_port}" can route to node "${dst_node}" interface "${dst_port}" ${hops} hops away using IPv4
| TG can route to DUT egress interface
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']}
| | Compute Path
| | ${src_port} | ${src_node}= | First Interface
| | Node "${src_node}" interface "${src_port}" can route to node "${dst_node}" interface "${dst_port}" ${hops} hops away using IPv4
| TG can route to DUT2 through DUT1
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']}
| | Compute Path
| | ${src_port} | ${src_node}= | First Interface
| | Node "${src_node}" interface "${src_port}" can route to node "${dst_node}" interface "${dst_port}" ${hops} hops away using IPv4
| TG can route to DUT2 egress interface through DUT1
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | Compute Path
| | ${src_port} | ${src_node}= | First Interface
| | Node "${src_node}" interface "${src_port}" can route to node "${dst_node}" interface "${dst_port}" ${hops} hops away using IPv4
| TG can route to TG through DUT1 and DUT2
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | Compute Path
| | ${src_port} | ${src_node}= | First Interface
| | ${port} | ${node}= | Next Interface
| | Check ipv4 interface counter | ${node} | ${port} | ${exp_counter_val}
-| VPP can process ICMP echo request from min to max packet size with 1B increment
+| VPP can process ICMP echo request from min to 1500B packet size with 1B increment
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
+| | Ipv4 icmp echo sweep | ${nodes['TG']} | ${nodes['DUT1']} | 0 | 1452 | 1
+
+| VPP can process ICMP echo request from 1500B to max packet size with 10B increment
| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
-| | Ipv4 icmp echo sweep | ${nodes['TG']} | ${nodes['DUT1']}
-| | ... | ${nodes['TG']['interfaces']['port3']['name']}
-| | ... | ${nodes['DUT1']['interfaces']['port1']['name']}
+| | [Documentation] | This test case cannot be run reliably on VM_ENV because
+| | ... | the virtual hosts can be connected using a bridge which
+| | ... | has its own MTU
+| | [Setup] | Setup MTU on TG based on MTU on DUT | ${nodes['TG']} | ${nodes['DUT1']}
+| | [Teardown] | Set default Ethernet MTU on all interfaces on node | ${nodes['TG']}
+| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']}
+| | Compute Path
+| | ${dut_port} | ${dut_node}= | Last Interface
+| | ${mtu}= | Get Interface MTU | ${dut_node} | ${dut_port}
+| | # ICMP payload size is frame size minus size of Ehternet header, FCS,
+| | # IPv4 header and ICMP header
+| | ${end_size}= | Evaluate | ${mtu} - 14 - 4 - 20 - 8
+| | Run Keyword If | ${mtu} > 1518
+| | ... | Ipv4 icmp echo sweep | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | 1452 | ${end_size} | 10
| VPP responds to ARP request
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
| | Send ARP request and validate response | ${nodes['TG']} | ${nodes['DUT1']}
*** Settings ***
| Documentation | IPv6 untagged test suite
+| Library | resources.libraries.python.Trace
+| Resource | resources/libraries/robot/interfaces.robot
| Resource | resources/libraries/robot/ipv6.robot
| Resource | resources/libraries/robot/counters.robot
| Resource | resources/libraries/robot/default.robot
| Variables | resources/libraries/python/IPv6NodesAddr.py | ${nodes}
-| Force Tags | HW_ENV | VM_ENV
+| Force Tags | HW_ENV
| Suite Setup | Run Keywords | Setup ipv6 to all dut in topology | ${nodes} | ${nodes_ipv6_addr}
| ... | AND | Vpp nodes ra supress link layer | ${nodes}
| ... | AND | Vpp nodes setup ipv6 routing | ${nodes} | ${nodes_ipv6_addr}
| ... | AND | Setup all TGs before traffic script
| Test Setup | Clear interface counters on all vpp nodes in topology | ${nodes}
+| Test Teardown | Run Keyword If Test Failed | Show packet trace on all DUTs | ${nodes}
*** Test Cases ***
| VPP replies to ICMPv6 echo request
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
| | Ipv6 icmp echo | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes_ipv6_addr}
-| VPP can process ICMPv6 echo request from min to max packet size with 1B increment
+| VPP can process ICMPv6 echo request from min to 1500B packet size with 1B increment
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
+| | Ipv6 icmp echo sweep | ${nodes['TG']} | ${nodes['DUT1']} | 0 | 1452 | 1 | ${nodes_ipv6_addr}
+
+| VPP can process ICMPv6 echo request from 1500B to max packet size with 10B increment
| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
-| | Ipv6 icmp echo sweep | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes_ipv6_addr}
+| | [Documentation] | This test case cannot be run reliably on VM_ENV because
+| | ... | the virtual hosts can be connected using a bridge which
+| | ... | has its own MTU
+| | [Setup] | Setup MTU on TG based on MTU on DUT | ${nodes['TG']} | ${nodes['DUT1']}
+| | [Teardown] | Set default Ethernet MTU on all interfaces on node | ${nodes['TG']}
+| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']}
+| | Compute Path
+| | ${dut_port} | ${dut_node}= | Last Interface
+| | ${mtu}= | Get Interface MTU | ${dut_node} | ${dut_port}
+| | # ICMPv6 payload size is frame size minus size of Ehternet header, FCS,
+| | # IPv6 header and ICMPv6 header
+| | ${end_size}= | Evaluate | ${mtu} - 14 - 4 - 40 - 8
+| | Run Keyword If | ${mtu} > 1518
+| | ... | Ipv6 icmp echo sweep | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | 1452 | ${end_size} | 10 | ${nodes_ipv6_addr}
| TG can route to first DUT egress interface
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
| | Ipv6 tg to dut1 egress | ${nodes['TG']} | ${nodes['DUT1']} |
| | ... | ${nodes['DUT2']} | ${nodes_ipv6_addr}
| TG can route to second DUT through first DUT
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
| | Ipv6 tg to dut2 via dut1 | ${nodes['TG']} | ${nodes['DUT1']}
| | ... | ${nodes['DUT2']} | ${nodes_ipv6_addr}
| TG can route to second DUT egress interface through first DUT
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
| | Ipv6 tg to dut2 egress via dut1 | ${nodes['TG']} | ${nodes['DUT1']}
| | ... | ${nodes['DUT2']} | ${nodes_ipv6_addr}
| TG can route to TG through first and second DUT
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
| | Ipv6 tg to tg routed | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']}
| | ... | ${nodes_ipv6_addr}
| VPP replies to IPv6 Neighbor Solicitation
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
| | Ipv6 neighbor solicitation | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes_ipv6_addr}
| Resource | resources/libraries/robot/default.robot
| Resource | resources/libraries/robot/vxlan.robot
| Resource | resources/libraries/robot/l2_traffic.robot
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | EXPECTED_FAILING
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | EXPECTED_FAILING | VM_ENV | HW_ENV
| Suite Setup | Run Keywords | Setup all DUTs before test
| ... | AND | Setup all TGs before traffic script
| ... | AND | Setup VXLAN tunnel on nodes | ${nodes['TG']}
Code Review / csit.git / commitdiff