CSIT-597: added additional variables needed for virl host construction. 78/6878/1
authorEd Kern <ejk@cisco.com>
Thu, 25 May 2017 13:25:13 +0000 (07:25 -0600)
committerEd Kern <ejk@cisco.com>
Thu, 25 May 2017 13:25:13 +0000 (07:25 -0600)
Also converted ansible_hosts file to utf-8 because the dos format it was in
was pissing me off.

Change-Id: Ie436f5abc6b397d406efec6e49e0845d915f2310
Signed-off-by: Ed Kern <ejk@cisco.com>
resources/tools/testbed-setup/ansible_hosts
resources/tools/testbed-setup/playbooks/02-virl-bootstrap.yaml

index 92df915..05e1242 100644 (file)
@@ -1,19 +1,19 @@
-#[tg]\r
-#10.30.51.16 hostname=t1-tg1 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7\r
-#10.30.51.20 hostname=t2-tg1 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7\r
-#10.30.51.24 hostname=t3-tg1 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7\r
-\r
-#[sut]\r
-#10.30.51.17 hostname=t1-sut1 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7\r
-#10.30.51.18 hostname=t1-sut2 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7\r
-#10.30.51.21 hostname=t2-sut1 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7\r
-#10.30.51.22 hostname=t2-sut2 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7\r
-#10.30.51.25 hostname=t3-sut1 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7\r
-#10.30.51.26 hostname=t3-sut2 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7\r
-\r
-#By default, let's not touch the VIRL host. Any (unintended) configuration change on VIRL host\r
-#is a recipe for disaster.\r
-#[virl]\r
-#10.30.51.28 hostname=t4-virl1 virl_l2_start=10.30.51.31 virl_l2_end=10.30.51.105 ansible_python_interpreter=/usr/bin/python2.7\r
-#10.30.51.29 hostname=t4-virl2 virl_l2_start=10.30.51.106 virl_l2_end=10.30.51.180 ansible_python_interpreter=/usr/bin/python2.7\r
-#10.30.51.30 hostname=t4-virl3 virl_l2_start=10.30.51.181 virl_l2_end=10.30.51.254 ansible_python_interpreter=/usr/bin/python2.7\r
+#[tg]
+#10.30.51.16 hostname=t1-tg1 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7
+#10.30.51.20 hostname=t2-tg1 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7
+#10.30.51.24 hostname=t3-tg1 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7
+
+#[sut]
+#10.30.51.17 hostname=t1-sut1 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7
+#10.30.51.18 hostname=t1-sut2 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7
+#10.30.51.21 hostname=t2-sut1 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7
+#10.30.51.22 hostname=t2-sut2 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7
+#10.30.51.25 hostname=t3-sut1 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7
+#10.30.51.26 hostname=t3-sut2 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7
+
+#By default, let's not touch the VIRL host. Any (unintended) configuration change on VIRL host
+#is a recipe for disaster.
+#[virl]
+#10.30.51.28 hostname=t4-virl1 virl_l2_start=10.30.52.2 virl_l2_end=10.30.52.253 ansible_python_interpreter=/usr/bin/python2.7 virl_l2_gateway=10.30.52.1 virl_l2_network=10.30.52.0/24
+#10.30.51.29 hostname=t4-virl2 virl_l2_start=10.30.53.2 virl_l2_end=10.30.53.253 ansible_python_interpreter=/usr/bin/python2.7 virl_l2_gateway=10.30.53.1 virl_l2_network=10.30.53.0/24
+#10.30.51.30 hostname=t4-virl3 virl_l2_start=10.30.54.2 virl_l2_end=10.30.54.253 ansible_python_interpreter=/usr/bin/python2.7 virl_l2_gateway=10.30.54.1 virl_l2_network=10.30.54.0/24
\ No newline at end of file
index f3273e2..0178b26 100644 (file)
@@ -10,7 +10,6 @@
   - name: copy vsetting file to /etc
     sudo: yes
     shell: cp /home/virl/virl-bootstrap/vsettings.ini /etc/virl.ini
-  - command: crudini --set /etc/virl.ini DEFAULT l2_network_gateway {{ l2_gateway }}
   - command: crudini --set /etc/virl.ini DEFAULT hostname {{ hostname }}
   - command: crudini --set /etc/virl.ini DEFAULT domain_name linuxfoundation.org
   - command: crudini --set /etc/virl.ini DEFAULT using_dhcp_on_the_public_port False

©2016 FD.io a Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation. Linux is a registered trademark of Linus Torvalds.
Please see our privacy policy and terms of use.