CSIT-1203: Add parsing of NDRPDR test

Change-Id: I55be02df7f8979ad4c10b79d87f5065452a3e6e6
Signed-off-by: Tibor Frank <tifrank@cisco.com>

diff --git a/docs/report/dpdk_performance_tests/packet_latency_graphs/ip4.rst b/docs/report/dpdk_performance_tests/packet_latency_graphs/ip4.rst
index 10b4185..819e4a9 100644 (file)
--- a/docs/report/dpdk_performance_tests/packet_latency_graphs/ip4.rst
+++ b/docs/report/dpdk_performance_tests/packet_latency_graphs/ip4.rst
@@ -24,7 +24,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-3n-hsw-x520-64b-1t1c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-3n-hsw-x520-64b-1t1c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -33,8 +33,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-3n-hsw-x520-64b-1t1c-base-ndr-lat50}
-            \label{fig:l3fwd-3n-hsw-x520-64b-1t1c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-3n-hsw-x520-64b-1t1c-base-ndr-lat}
+            \label{fig:l3fwd-3n-hsw-x520-64b-1t1c-base-ndr-lat}
     \end{figure}
 
 64b-2t2c-base
@@ -49,7 +49,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-3n-hsw-x520-64b-2t2c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-3n-hsw-x520-64b-2t2c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -58,8 +58,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-3n-hsw-x520-64b-2t2c-base-ndr-lat50}
-            \label{fig:l3fwd-3n-hsw-x520-64b-2t2c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-3n-hsw-x520-64b-2t2c-base-ndr-lat}
+            \label{fig:l3fwd-3n-hsw-x520-64b-2t2c-base-ndr-lat}
     \end{figure}
 
 3n-hsw-x710
@@ -77,7 +77,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-3n-hsw-x710-64b-1t1c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-3n-hsw-x710-64b-1t1c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -86,8 +86,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-3n-hsw-x710-64b-1t1c-base-ndr-lat50}
-            \label{fig:l3fwd-3n-hsw-x710-64b-1t1c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-3n-hsw-x710-64b-1t1c-base-ndr-lat}
+            \label{fig:l3fwd-3n-hsw-x710-64b-1t1c-base-ndr-lat}
     \end{figure}
 
 64b-2t2c-base
@@ -102,7 +102,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-3n-hsw-x710-64b-2t2c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-3n-hsw-x710-64b-2t2c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -111,8 +111,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-3n-hsw-x710-64b-2t2c-base-ndr-lat50}
-            \label{fig:l3fwd-3n-hsw-x710-64b-2t2c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-3n-hsw-x710-64b-2t2c-base-ndr-lat}
+            \label{fig:l3fwd-3n-hsw-x710-64b-2t2c-base-ndr-lat}
     \end{figure}
 
 3n-hsw-xl710
@@ -130,7 +130,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-3n-hsw-xl710-64b-1t1c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-3n-hsw-xl710-64b-1t1c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -139,8 +139,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-3n-hsw-xl710-64b-1t1c-base-ndr-lat50}
-            \label{fig:l3fwd-3n-hsw-xl710-64b-1t1c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-3n-hsw-xl710-64b-1t1c-base-ndr-lat}
+            \label{fig:l3fwd-3n-hsw-xl710-64b-1t1c-base-ndr-lat}
     \end{figure}
 
 64b-2t2c-base
@@ -155,7 +155,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-3n-hsw-xl710-64b-2t2c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-3n-hsw-xl710-64b-2t2c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -164,8 +164,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-3n-hsw-xl710-64b-2t2c-base-ndr-lat50}
-            \label{fig:l3fwd-3n-hsw-xl710-64b-2t2c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-3n-hsw-xl710-64b-2t2c-base-ndr-lat}
+            \label{fig:l3fwd-3n-hsw-xl710-64b-2t2c-base-ndr-lat}
     \end{figure}
 
 3n-skx-x710
@@ -183,7 +183,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-3n-skx-x710-64b-2t1c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-3n-skx-x710-64b-2t1c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -192,8 +192,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-3n-skx-x710-64b-2t1c-base-ndr-lat50}
-            \label{fig:l3fwd-3n-skx-x710-64b-2t1c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-3n-skx-x710-64b-2t1c-base-ndr-lat}
+            \label{fig:l3fwd-3n-skx-x710-64b-2t1c-base-ndr-lat}
     \end{figure}
 
 64b-4t2c-base
@@ -208,7 +208,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-3n-skx-x710-64b-4t2c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-3n-skx-x710-64b-4t2c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -217,8 +217,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-3n-skx-x710-64b-4t2c-base-ndr-lat50}
-            \label{fig:l3fwd-3n-skx-x710-64b-4t2c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-3n-skx-x710-64b-4t2c-base-ndr-lat}
+            \label{fig:l3fwd-3n-skx-x710-64b-4t2c-base-ndr-lat}
     \end{figure}
 
 3n-skx-xxv710
@@ -236,7 +236,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-3n-skx-xxv710-64b-2t1c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-3n-skx-xxv710-64b-2t1c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -245,8 +245,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-3n-skx-xxv710-64b-2t1c-base-ndr-lat50}
-            \label{fig:l3fwd-3n-skx-xxv710-64b-2t1c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-3n-skx-xxv710-64b-2t1c-base-ndr-lat}
+            \label{fig:l3fwd-3n-skx-xxv710-64b-2t1c-base-ndr-lat}
     \end{figure}
 
 64b-4t2c-base
@@ -261,7 +261,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-3n-skx-xxv710-64b-4t2c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-3n-skx-xxv710-64b-4t2c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -270,8 +270,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-3n-skx-xxv710-64b-4t2c-base-ndr-lat50}
-            \label{fig:l3fwd-3n-skx-xxv710-64b-4t2c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-3n-skx-xxv710-64b-4t2c-base-ndr-lat}
+            \label{fig:l3fwd-3n-skx-xxv710-64b-4t2c-base-ndr-lat}
     \end{figure}
 
 2n-skx-x710
@@ -289,7 +289,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-2n-skx-x710-64b-2t1c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-2n-skx-x710-64b-2t1c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -298,8 +298,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-2n-skx-x710-64b-2t1c-base-ndr-lat50}
-            \label{fig:l3fwd-2n-skx-x710-64b-2t1c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-2n-skx-x710-64b-2t1c-base-ndr-lat}
+            \label{fig:l3fwd-2n-skx-x710-64b-2t1c-base-ndr-lat}
     \end{figure}
 
 64b-4t2c-base
@@ -314,7 +314,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-2n-skx-x710-64b-4t2c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-2n-skx-x710-64b-4t2c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -323,8 +323,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-2n-skx-x710-64b-4t2c-base-ndr-lat50}
-            \label{fig:l3fwd-2n-skx-x710-64b-4t2c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-2n-skx-x710-64b-4t2c-base-ndr-lat}
+            \label{fig:l3fwd-2n-skx-x710-64b-4t2c-base-ndr-lat}
     \end{figure}
 
 2n-skx-xxv710
@@ -342,7 +342,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-2n-skx-xxv710-64b-2t1c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-2n-skx-xxv710-64b-2t1c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -351,8 +351,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-2n-skx-xxv710-64b-2t1c-base-ndr-lat50}
-            \label{fig:l3fwd-2n-skx-xxv710-64b-2t1c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-2n-skx-xxv710-64b-2t1c-base-ndr-lat}
+            \label{fig:l3fwd-2n-skx-xxv710-64b-2t1c-base-ndr-lat}
     \end{figure}
 
 64b-4t2c-base
@@ -367,7 +367,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-2n-skx-xxv710-64b-4t2c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/l3fwd-2n-skx-xxv710-64b-4t2c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -376,6 +376,6 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-2n-skx-xxv710-64b-4t2c-base-ndr-lat50}
-            \label{fig:l3fwd-2n-skx-xxv710-64b-4t2c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l3fwd-2n-skx-xxv710-64b-4t2c-base-ndr-lat}
+            \label{fig:l3fwd-2n-skx-xxv710-64b-4t2c-base-ndr-lat}
     \end{figure}

diff --git a/docs/report/dpdk_performance_tests/packet_latency_graphs/l2.rst b/docs/report/dpdk_performance_tests/packet_latency_graphs/l2.rst
index 67f8472..6d7ea30 100644 (file)
--- a/docs/report/dpdk_performance_tests/packet_latency_graphs/l2.rst
+++ b/docs/report/dpdk_performance_tests/packet_latency_graphs/l2.rst
@@ -25,7 +25,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-3n-hsw-x520-64b-1t1c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-3n-hsw-x520-64b-1t1c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -34,8 +34,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-3n-hsw-x520-64b-1t1c-base-ndr-lat50}
-            \label{fig:testpmd-3n-hsw-x520-64b-1t1c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-3n-hsw-x520-64b-1t1c-base-ndr-lat}
+            \label{fig:testpmd-3n-hsw-x520-64b-1t1c-base-ndr-lat}
     \end{figure}
 
 64b-2t2c-base
@@ -50,7 +50,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-3n-hsw-x520-64b-2t2c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-3n-hsw-x520-64b-2t2c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -59,8 +59,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-3n-hsw-x520-64b-2t2c-base-ndr-lat50}
-            \label{fig:testpmd-3n-hsw-x520-64b-2t2c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-3n-hsw-x520-64b-2t2c-base-ndr-lat}
+            \label{fig:testpmd-3n-hsw-x520-64b-2t2c-base-ndr-lat}
     \end{figure}
 
 3n-hsw-x710
@@ -78,7 +78,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-3n-hsw-x710-64b-1t1c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-3n-hsw-x710-64b-1t1c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -87,8 +87,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-3n-hsw-x710-64b-1t1c-base-ndr-lat50}
-            \label{fig:testpmd-3n-hsw-x710-64b-1t1c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-3n-hsw-x710-64b-1t1c-base-ndr-lat}
+            \label{fig:testpmd-3n-hsw-x710-64b-1t1c-base-ndr-lat}
     \end{figure}
 
 64b-2t2c-base
@@ -103,7 +103,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-3n-hsw-x710-64b-2t2c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-3n-hsw-x710-64b-2t2c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -112,8 +112,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-3n-hsw-x710-64b-2t2c-base-ndr-lat50}
-            \label{fig:testpmd-3n-hsw-x710-64b-2t2c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-3n-hsw-x710-64b-2t2c-base-ndr-lat}
+            \label{fig:testpmd-3n-hsw-x710-64b-2t2c-base-ndr-lat}
     \end{figure}
 
 3n-hsw-xl710
@@ -131,7 +131,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-3n-hsw-xl710-64b-1t1c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-3n-hsw-xl710-64b-1t1c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -140,8 +140,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-3n-hsw-xl710-64b-1t1c-base-ndr-lat50}
-            \label{fig:testpmd-3n-hsw-xl710-64b-1t1c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-3n-hsw-xl710-64b-1t1c-base-ndr-lat}
+            \label{fig:testpmd-3n-hsw-xl710-64b-1t1c-base-ndr-lat}
     \end{figure}
 
 64b-2t2c-base
@@ -156,7 +156,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-3n-hsw-xl710-64b-2t2c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-3n-hsw-xl710-64b-2t2c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -165,8 +165,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-3n-hsw-xl710-64b-2t2c-base-ndr-lat50}
-            \label{fig:testpmd-3n-hsw-xl710-64b-2t2c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-3n-hsw-xl710-64b-2t2c-base-ndr-lat}
+            \label{fig:testpmd-3n-hsw-xl710-64b-2t2c-base-ndr-lat}
     \end{figure}
 
 3n-skx-x710
@@ -184,7 +184,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-3n-skx-x710-64b-2t1c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-3n-skx-x710-64b-2t1c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -193,8 +193,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-3n-skx-x710-64b-2t1c-base-ndr-lat50}
-            \label{fig:testpmd-3n-skx-x710-64b-2t1c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-3n-skx-x710-64b-2t1c-base-ndr-lat}
+            \label{fig:testpmd-3n-skx-x710-64b-2t1c-base-ndr-lat}
     \end{figure}
 
 64b-4t2c-base
@@ -209,7 +209,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-3n-skx-x710-64b-4t2c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-3n-skx-x710-64b-4t2c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -218,8 +218,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-3n-skx-x710-64b-4t2c-base-ndr-lat50}
-            \label{fig:testpmd-3n-skx-x710-64b-4t2c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-3n-skx-x710-64b-4t2c-base-ndr-lat}
+            \label{fig:testpmd-3n-skx-x710-64b-4t2c-base-ndr-lat}
     \end{figure}
 
 3n-skx-xxv710
@@ -237,7 +237,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-3n-skx-xxv710-64b-2t1c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-3n-skx-xxv710-64b-2t1c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -246,8 +246,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-3n-skx-xxv710-64b-2t1c-base-ndr-lat50}
-            \label{fig:testpmd-3n-skx-xxv710-64b-2t1c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-3n-skx-xxv710-64b-2t1c-base-ndr-lat}
+            \label{fig:testpmd-3n-skx-xxv710-64b-2t1c-base-ndr-lat}
     \end{figure}
 
 64b-4t2c-base
@@ -262,7 +262,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-3n-skx-xxv710-64b-4t2c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-3n-skx-xxv710-64b-4t2c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -271,8 +271,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-3n-skx-xxv710-64b-4t2c-base-ndr-lat50}
-            \label{fig:testpmd-3n-skx-xxv710-64b-4t2c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-3n-skx-xxv710-64b-4t2c-base-ndr-lat}
+            \label{fig:testpmd-3n-skx-xxv710-64b-4t2c-base-ndr-lat}
     \end{figure}
 
 2n-skx-x710
@@ -290,7 +290,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-2n-skx-x710-64b-2t1c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-2n-skx-x710-64b-2t1c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -299,8 +299,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-2n-skx-x710-64b-2t1c-base-ndr-lat50}
-            \label{fig:testpmd-2n-skx-x710-64b-2t1c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-2n-skx-x710-64b-2t1c-base-ndr-lat}
+            \label{fig:testpmd-2n-skx-x710-64b-2t1c-base-ndr-lat}
     \end{figure}
 
 64b-4t2c-base
@@ -315,7 +315,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-2n-skx-x710-64b-4t2c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-2n-skx-x710-64b-4t2c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -324,8 +324,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-2n-skx-x710-64b-4t2c-base-ndr-lat50}
-            \label{fig:testpmd-2n-skx-x710-64b-4t2c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-2n-skx-x710-64b-4t2c-base-ndr-lat}
+            \label{fig:testpmd-2n-skx-x710-64b-4t2c-base-ndr-lat}
     \end{figure}
 
 2n-skx-xxv710
@@ -343,7 +343,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-2n-skx-xxv710-64b-2t1c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-2n-skx-xxv710-64b-2t1c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -352,8 +352,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-2n-skx-xxv710-64b-2t1c-base-ndr-lat50}
-            \label{fig:testpmd-2n-skx-xxv710-64b-2t1c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-2n-skx-xxv710-64b-2t1c-base-ndr-lat}
+            \label{fig:testpmd-2n-skx-xxv710-64b-2t1c-base-ndr-lat}
     \end{figure}
 
 64b-4t2c-base
@@ -368,7 +368,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-2n-skx-xxv710-64b-4t2c-base-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/testpmd-2n-skx-xxv710-64b-4t2c-base-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -377,6 +377,6 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/dpdk/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-2n-skx-xxv710-64b-4t2c-base-ndr-lat50}
-            \label{fig:testpmd-2n-skx-xxv710-64b-4t2c-base-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{testpmd-2n-skx-xxv710-64b-4t2c-base-ndr-lat}
+            \label{fig:testpmd-2n-skx-xxv710-64b-4t2c-base-ndr-lat}
     \end{figure}

diff --git a/docs/report/vpp_performance_tests/csit_release_notes.rst b/docs/report/vpp_performance_tests/csit_release_notes.rst
index 35ab440..1954ad1 100644 (file)
--- a/docs/report/vpp_performance_tests/csit_release_notes.rst
+++ b/docs/report/vpp_performance_tests/csit_release_notes.rst
@@ -55,10 +55,10 @@ NDR Changes
 NDR small packet throughput changes between releases are available in a
 CSV and pretty ASCII formats:
 
-  - `csv format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.csv>`_,
-  - `csv format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.csv>`_,
-  - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.txt>`_,
-  - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.txt>`_.
+  - `csv format for 1t1c <../_static/vpp/performance-changes-1t1c-ndr.csv>`_,
+  - `csv format for 2t2c <../_static/vpp/performance-changes-2t2c-ndr.csv>`_,
+  - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-1t1c-ndr.txt>`_,
+  - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-2t2c-ndr.txt>`_.
 
 .. note::
 
@@ -72,10 +72,10 @@ PDR Changes
 NDR small packet throughput changes between releases are available in a
 CSV and pretty ASCII formats:
 
-  - `csv format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.csv>`_,
-  - `csv format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.csv>`_,
-  - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.txt>`_,
-  - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.txt>`_.
+  - `csv format for 1t1c <../_static/vpp/performance-changes-1t1c-pdr.csv>`_,
+  - `csv format for 2t2c <../_static/vpp/performance-changes-2t2c-pdr.csv>`_,
+  - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-1t1c-pdr.txt>`_,
+  - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-2t2c-pdr.txt>`_.
 
 .. note::
 
@@ -89,12 +89,12 @@ MRR Changes
 MRR small packet throughput changes between releases are available in a
 CSV and pretty ASCII formats:
 
-  - `csv format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.csv>`_,
-  - `csv format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.csv>`_,
-  - `csv format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.csv>`_,
-  - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.txt>`_,
-  - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.txt>`_,
-  - `pretty ASCII format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.txt>`_.
+  - `csv format for 1t1c <../_static/vpp/performance-changes-1t1c-mrr.csv>`_,
+  - `csv format for 2t2c <../_static/vpp/performance-changes-2t2c-mrr.csv>`_,
+  - `csv format for 4t4c <../_static/vpp/performance-changes-4t4c-mrr.csv>`_,
+  - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-1t1c-mrr.txt>`_,
+  - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-2t2c-mrr.txt>`_,
+  - `pretty ASCII format for 4t4c <../_static/vpp/performance-changes-4t4c-mrr.txt>`_.
 
 .. note::
 

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst
index 12dc349..230b104 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst
@@ -25,7 +25,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -34,8 +34,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:memif-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:memif-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t2c-base_and_scale
@@ -50,7 +50,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -59,8 +59,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:memif-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:memif-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 3n-hsw-x710
@@ -78,7 +78,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -87,8 +87,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:memif-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:memif-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t2c-base_and_scale
@@ -103,7 +103,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -112,8 +112,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:memif-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:memif-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 3n-hsw-xl710
@@ -131,7 +131,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -140,8 +140,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:memif-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:memif-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t2c-base_and_scale
@@ -156,7 +156,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -165,8 +165,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:memif-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:memif-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 3n-skx-x710
@@ -184,7 +184,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -193,8 +193,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:memif-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:memif-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-4t2c-base_and_scale
@@ -209,7 +209,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -218,8 +218,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:memif-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:memif-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 3n-skx-xxv710
@@ -237,7 +237,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -246,8 +246,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:memif-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:memif-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-4t2c-base_and_scale
@@ -262,7 +262,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -271,8 +271,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:memif-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:memif-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 2n-skx-x710
@@ -290,7 +290,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -299,8 +299,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:memif-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:memif-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-4t2c-base_and_scale
@@ -315,7 +315,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -324,8 +324,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:memif-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:memif-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 2n-skx-xxv710
@@ -343,7 +343,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -352,8 +352,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:memif-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:memif-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-4t2c-base_and_scale
@@ -368,7 +368,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/memif-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -377,6 +377,6 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:memif-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{memif-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:memif-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst
index ad341bd..222a7d8 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst
@@ -25,7 +25,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -34,8 +34,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:k8s-memif-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:k8s-memif-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t2c-base_and_scale
@@ -50,7 +50,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -59,8 +59,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:k8s-memif-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:k8s-memif-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 3n-hsw-x710
@@ -78,7 +78,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -87,8 +87,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:k8s-memif-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:k8s-memif-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t2c-base_and_scale
@@ -103,7 +103,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -112,8 +112,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:k8s-memif-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:k8s-memif-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 3n-skx-x710
@@ -131,7 +131,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -140,8 +140,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:k8s-memif-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:k8s-memif-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-4t2c-base_and_scale
@@ -156,7 +156,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -165,8 +165,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:k8s-memif-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:k8s-memif-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 3n-skx-xxv710
@@ -184,7 +184,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -193,8 +193,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:k8s-memif-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:k8s-memif-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-4t2c-base_and_scale
@@ -209,7 +209,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -218,8 +218,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:k8s-memif-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:k8s-memif-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 2n-skx-x710
@@ -237,7 +237,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -246,8 +246,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:k8s-memif-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:k8s-memif-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-4t2c-base_and_scale
@@ -262,7 +262,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -271,8 +271,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:k8s-memif-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:k8s-memif-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 2n-skx-xxv710
@@ -290,7 +290,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -299,8 +299,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:k8s-memif-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:k8s-memif-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-4t2c-base_and_scale
@@ -315,7 +315,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/k8s-memif-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -324,6 +324,6 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:k8s-memif-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{k8s-memif-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:k8s-memif-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ip4.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ip4.rst
index 16bbe20..a7f3524 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/ip4.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ip4.rst
@@ -25,7 +25,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -34,8 +34,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t2c-base_and_scale
@@ -50,7 +50,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -59,8 +59,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-1t1c-features
@@ -75,7 +75,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-hsw-x520-64b-1t1c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-hsw-x520-64b-1t1c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -84,8 +84,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-hsw-x520-64b-1t1c-features-ndr-lat50}
-            \label{fig:ip4-3n-hsw-x520-64b-1t1c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-hsw-x520-64b-1t1c-features-ndr-lat}
+            \label{fig:ip4-3n-hsw-x520-64b-1t1c-features-ndr-lat}
     \end{figure}
 
 64b-2t2c-features
@@ -100,7 +100,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-hsw-x520-64b-2t2c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-hsw-x520-64b-2t2c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -109,8 +109,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-hsw-x520-64b-2t2c-features-ndr-lat50}
-            \label{fig:ip4-3n-hsw-x520-64b-2t2c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-hsw-x520-64b-2t2c-features-ndr-lat}
+            \label{fig:ip4-3n-hsw-x520-64b-2t2c-features-ndr-lat}
     \end{figure}
 
 3n-hsw-x710
@@ -128,7 +128,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -137,8 +137,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t2c-base_and_scale
@@ -153,7 +153,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -162,8 +162,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-1t1c-features
@@ -178,7 +178,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-hsw-x710-64b-1t1c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-hsw-x710-64b-1t1c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -187,8 +187,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-hsw-x710-64b-1t1c-features-ndr-lat50}
-            \label{fig:ip4-3n-hsw-x710-64b-1t1c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-hsw-x710-64b-1t1c-features-ndr-lat}
+            \label{fig:ip4-3n-hsw-x710-64b-1t1c-features-ndr-lat}
     \end{figure}
 
 64b-2t2c-features
@@ -203,7 +203,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-hsw-x710-64b-2t2c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-hsw-x710-64b-2t2c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -212,8 +212,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-hsw-x710-64b-2t2c-features-ndr-lat50}
-            \label{fig:ip4-3n-hsw-x710-64b-2t2c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-hsw-x710-64b-2t2c-features-ndr-lat}
+            \label{fig:ip4-3n-hsw-x710-64b-2t2c-features-ndr-lat}
     \end{figure}
 
 3n-hsw-xl710
@@ -231,7 +231,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -240,8 +240,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t2c-base_and_scale
@@ -256,7 +256,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -265,8 +265,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 3n-skx-x710
@@ -284,7 +284,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -293,8 +293,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:ip4-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:ip4-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-4t2c-base_and_scale
@@ -309,7 +309,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -318,8 +318,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:ip4-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:ip4-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t1c-features
@@ -334,7 +334,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-skx-x710-64b-2t1c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-skx-x710-64b-2t1c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -343,8 +343,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-skx-x710-64b-2t1c-features-ndr-lat50}
-            \label{fig:ip4-3n-skx-x710-64b-2t1c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-skx-x710-64b-2t1c-features-ndr-lat}
+            \label{fig:ip4-3n-skx-x710-64b-2t1c-features-ndr-lat}
     \end{figure}
 
 64b-4t2c-features
@@ -359,7 +359,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-skx-x710-64b-4t2c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-skx-x710-64b-4t2c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -368,8 +368,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-skx-x710-64b-4t2c-features-ndr-lat50}
-            \label{fig:ip4-3n-skx-x710-64b-4t2c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-skx-x710-64b-4t2c-features-ndr-lat}
+            \label{fig:ip4-3n-skx-x710-64b-4t2c-features-ndr-lat}
     \end{figure}
 
 3n-skx-xxv710
@@ -387,7 +387,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -396,8 +396,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:ip4-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:ip4-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-4t2c-base_and_scale
@@ -412,7 +412,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -421,8 +421,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:ip4-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:ip4-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t1c-features
@@ -437,7 +437,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-skx-xxv710-64b-2t1c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-skx-xxv710-64b-2t1c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -446,8 +446,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-skx-xxv710-64b-2t1c-features-ndr-lat50}
-            \label{fig:ip4-3n-skx-xxv710-64b-2t1c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-skx-xxv710-64b-2t1c-features-ndr-lat}
+            \label{fig:ip4-3n-skx-xxv710-64b-2t1c-features-ndr-lat}
     \end{figure}
 
 64b-4t2c-features
@@ -462,7 +462,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-skx-xxv710-64b-4t2c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-3n-skx-xxv710-64b-4t2c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -471,8 +471,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-skx-xxv710-64b-4t2c-features-ndr-lat50}
-            \label{fig:ip4-3n-skx-xxv710-64b-4t2c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-3n-skx-xxv710-64b-4t2c-features-ndr-lat}
+            \label{fig:ip4-3n-skx-xxv710-64b-4t2c-features-ndr-lat}
     \end{figure}
 
 2n-skx-x710
@@ -490,7 +490,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -499,8 +499,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:ip4-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:ip4-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-4t2c-base_and_scale
@@ -515,7 +515,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -524,8 +524,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:ip4-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:ip4-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t1c-features
@@ -540,7 +540,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-2n-skx-x710-64b-2t1c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-2n-skx-x710-64b-2t1c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -549,8 +549,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-2n-skx-x710-64b-2t1c-features-ndr-lat50}
-            \label{fig:ip4-2n-skx-x710-64b-2t1c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-2n-skx-x710-64b-2t1c-features-ndr-lat}
+            \label{fig:ip4-2n-skx-x710-64b-2t1c-features-ndr-lat}
     \end{figure}
 
 64b-4t2c-features
@@ -565,7 +565,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-2n-skx-x710-64b-4t2c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-2n-skx-x710-64b-4t2c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -574,8 +574,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-2n-skx-x710-64b-4t2c-features-ndr-lat50}
-            \label{fig:ip4-2n-skx-x710-64b-4t2c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-2n-skx-x710-64b-4t2c-features-ndr-lat}
+            \label{fig:ip4-2n-skx-x710-64b-4t2c-features-ndr-lat}
     \end{figure}
 
 2n-skx-xxv710
@@ -593,7 +593,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -602,8 +602,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:ip4-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:ip4-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-4t2c-base_and_scale
@@ -618,7 +618,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -627,8 +627,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:ip4-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:ip4-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t1c-features
@@ -643,7 +643,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-2n-skx-xxv710-64b-2t1c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-2n-skx-xxv710-64b-2t1c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -652,8 +652,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-2n-skx-xxv710-64b-2t1c-features-ndr-lat50}
-            \label{fig:ip4-2n-skx-xxv710-64b-2t1c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-2n-skx-xxv710-64b-2t1c-features-ndr-lat}
+            \label{fig:ip4-2n-skx-xxv710-64b-2t1c-features-ndr-lat}
     \end{figure}
 
 64b-4t2c-features
@@ -668,7 +668,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-2n-skx-xxv710-64b-4t2c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4-2n-skx-xxv710-64b-4t2c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -677,6 +677,6 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-2n-skx-xxv710-64b-4t2c-features-ndr-lat50}
-            \label{fig:ip4-2n-skx-xxv710-64b-4t2c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4-2n-skx-xxv710-64b-4t2c-features-ndr-lat}
+            \label{fig:ip4-2n-skx-xxv710-64b-4t2c-features-ndr-lat}
     \end{figure}

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ip4_tunnels.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ip4_tunnels.rst
index 1957576..e45755e 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/ip4_tunnels.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ip4_tunnels.rst
@@ -25,7 +25,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -34,8 +34,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:ip4tun-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:ip4tun-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t2c-base_and_scale
@@ -50,7 +50,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -59,8 +59,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:ip4tun-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:ip4tun-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 3n-hsw-x710
@@ -78,7 +78,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -87,8 +87,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:ip4tun-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:ip4tun-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t2c-base_and_scale
@@ -103,7 +103,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -112,8 +112,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:ip4tun-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:ip4tun-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 3n-skx-x710
@@ -131,7 +131,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -140,8 +140,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:ip4tun-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:ip4tun-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-4t2c-base_and_scale
@@ -156,7 +156,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -165,8 +165,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:ip4tun-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:ip4tun-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 3n-skx-xxv710
@@ -184,7 +184,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -193,8 +193,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:ip4tun-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:ip4tun-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-4t2c-base_and_scale
@@ -209,7 +209,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -218,8 +218,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:ip4tun-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:ip4tun-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 2n-skx-x710
@@ -237,7 +237,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -246,8 +246,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:ip4tun-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:ip4tun-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-4t2c-base_and_scale
@@ -262,7 +262,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -271,8 +271,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:ip4tun-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:ip4tun-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 2n-skx-xxv710
@@ -290,7 +290,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -299,8 +299,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:ip4tun-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:ip4tun-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-4t2c-base_and_scale
@@ -315,7 +315,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip4tun-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -324,6 +324,6 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:ip4tun-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip4tun-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:ip4tun-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ip6.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ip6.rst
index 4213439..4640d6e 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/ip6.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ip6.rst
@@ -25,7 +25,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -34,8 +34,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:ip6-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:ip6-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 78b-2t2c-base_and_scale
@@ -50,7 +50,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -59,8 +59,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:ip6-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:ip6-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 78b-1t1c-features
@@ -75,7 +75,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-hsw-x520-78b-1t1c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-hsw-x520-78b-1t1c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -84,8 +84,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-hsw-x520-78b-1t1c-features-ndr-lat50}
-            \label{fig:ip6-3n-hsw-x520-78b-1t1c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-hsw-x520-78b-1t1c-features-ndr-lat}
+            \label{fig:ip6-3n-hsw-x520-78b-1t1c-features-ndr-lat}
     \end{figure}
 
 78b-2t2c-features
@@ -100,7 +100,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-hsw-x520-78b-2t2c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-hsw-x520-78b-2t2c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -109,8 +109,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-hsw-x520-78b-2t2c-features-ndr-lat50}
-            \label{fig:ip6-3n-hsw-x520-78b-2t2c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-hsw-x520-78b-2t2c-features-ndr-lat}
+            \label{fig:ip6-3n-hsw-x520-78b-2t2c-features-ndr-lat}
     \end{figure}
 
 3n-hsw-x710
@@ -128,7 +128,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-hsw-x710-78b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-hsw-x710-78b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -137,8 +137,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-hsw-x710-78b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:ip6-3n-hsw-x710-78b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-hsw-x710-78b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:ip6-3n-hsw-x710-78b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 78b-2t2c-base_and_scale
@@ -153,7 +153,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-hsw-x710-78b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-hsw-x710-78b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -162,8 +162,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-hsw-x710-78b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:ip6-3n-hsw-x710-78b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-hsw-x710-78b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:ip6-3n-hsw-x710-78b-2t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 78b-1t1c-features
@@ -178,7 +178,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-hsw-x710-78b-1t1c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-hsw-x710-78b-1t1c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -187,8 +187,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-hsw-x710-78b-1t1c-features-ndr-lat50}
-            \label{fig:ip6-3n-hsw-x710-78b-1t1c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-hsw-x710-78b-1t1c-features-ndr-lat}
+            \label{fig:ip6-3n-hsw-x710-78b-1t1c-features-ndr-lat}
     \end{figure}
 
 78b-2t2c-features
@@ -203,7 +203,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-hsw-x710-78b-2t2c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-hsw-x710-78b-2t2c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -212,8 +212,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-hsw-x710-78b-2t2c-features-ndr-lat50}
-            \label{fig:ip6-3n-hsw-x710-78b-2t2c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-hsw-x710-78b-2t2c-features-ndr-lat}
+            \label{fig:ip6-3n-hsw-x710-78b-2t2c-features-ndr-lat}
     \end{figure}
 
 3n-hsw-xl710
@@ -231,7 +231,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-hsw-xl710-78b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-hsw-xl710-78b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -240,8 +240,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-hsw-xl710-78b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:ip6-3n-hsw-xl710-78b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-hsw-xl710-78b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:ip6-3n-hsw-xl710-78b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 78b-2t2c-base_and_scale
@@ -256,7 +256,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-hsw-xl710-78b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-hsw-xl710-78b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -265,8 +265,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-hsw-xl710-78b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:ip6-3n-hsw-xl710-78b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-hsw-xl710-78b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:ip6-3n-hsw-xl710-78b-2t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 3n-skx-x710
@@ -284,7 +284,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-skx-x710-78b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-skx-x710-78b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -293,8 +293,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-skx-x710-78b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:ip6-3n-skx-x710-78b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-skx-x710-78b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:ip6-3n-skx-x710-78b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 78b-4t2c-base_and_scale
@@ -309,7 +309,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-skx-x710-78b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-skx-x710-78b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -318,8 +318,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-skx-x710-78b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:ip6-3n-skx-x710-78b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-skx-x710-78b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:ip6-3n-skx-x710-78b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 78b-2t1c-features
@@ -334,7 +334,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-skx-x710-78b-2t1c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-skx-x710-78b-2t1c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -343,8 +343,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-skx-x710-78b-2t1c-features-ndr-lat50}
-            \label{fig:ip6-3n-skx-x710-78b-2t1c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-skx-x710-78b-2t1c-features-ndr-lat}
+            \label{fig:ip6-3n-skx-x710-78b-2t1c-features-ndr-lat}
     \end{figure}
 
 78b-4t2c-features
@@ -359,7 +359,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-skx-x710-78b-4t2c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-skx-x710-78b-4t2c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -368,8 +368,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-skx-x710-78b-4t2c-features-ndr-lat50}
-            \label{fig:ip6-3n-skx-x710-78b-4t2c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-skx-x710-78b-4t2c-features-ndr-lat}
+            \label{fig:ip6-3n-skx-x710-78b-4t2c-features-ndr-lat}
     \end{figure}
 
 3n-skx-xxv710
@@ -387,7 +387,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-skx-xxv710-78b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-skx-xxv710-78b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -396,8 +396,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-skx-xxv710-78b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:ip6-3n-skx-xxv710-78b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-skx-xxv710-78b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:ip6-3n-skx-xxv710-78b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 78b-4t2c-base_and_scale
@@ -412,7 +412,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-skx-xxv710-78b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-skx-xxv710-78b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -421,8 +421,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-skx-xxv710-78b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:ip6-3n-skx-xxv710-78b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-skx-xxv710-78b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:ip6-3n-skx-xxv710-78b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 78b-2t1c-features
@@ -437,7 +437,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-skx-xxv710-78b-2t1c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-skx-xxv710-78b-2t1c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -446,8 +446,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-skx-xxv710-78b-2t1c-features-ndr-lat50}
-            \label{fig:ip6-3n-skx-xxv710-78b-2t1c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-skx-xxv710-78b-2t1c-features-ndr-lat}
+            \label{fig:ip6-3n-skx-xxv710-78b-2t1c-features-ndr-lat}
     \end{figure}
 
 78b-4t2c-features
@@ -462,7 +462,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-skx-xxv710-78b-4t2c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-3n-skx-xxv710-78b-4t2c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -471,8 +471,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-skx-xxv710-78b-4t2c-features-ndr-lat50}
-            \label{fig:ip6-3n-skx-xxv710-78b-4t2c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-3n-skx-xxv710-78b-4t2c-features-ndr-lat}
+            \label{fig:ip6-3n-skx-xxv710-78b-4t2c-features-ndr-lat}
     \end{figure}
 
 2n-skx-x710
@@ -490,7 +490,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-2n-skx-x710-78b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-2n-skx-x710-78b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -499,8 +499,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-2n-skx-x710-78b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:ip6-2n-skx-x710-78b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-2n-skx-x710-78b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:ip6-2n-skx-x710-78b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 78b-4t2c-base_and_scale
@@ -515,7 +515,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-2n-skx-x710-78b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-2n-skx-x710-78b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -524,8 +524,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-2n-skx-x710-78b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:ip6-2n-skx-x710-78b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-2n-skx-x710-78b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:ip6-2n-skx-x710-78b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 78b-2t1c-features
@@ -540,7 +540,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-2n-skx-x710-78b-2t1c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-2n-skx-x710-78b-2t1c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -549,8 +549,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-2n-skx-x710-78b-2t1c-features-ndr-lat50}
-            \label{fig:ip6-2n-skx-x710-78b-2t1c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-2n-skx-x710-78b-2t1c-features-ndr-lat}
+            \label{fig:ip6-2n-skx-x710-78b-2t1c-features-ndr-lat}
     \end{figure}
 
 78b-4t2c-features
@@ -565,7 +565,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-2n-skx-x710-78b-4t2c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-2n-skx-x710-78b-4t2c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -574,8 +574,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-2n-skx-x710-78b-4t2c-features-ndr-lat50}
-            \label{fig:ip6-2n-skx-x710-78b-4t2c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-2n-skx-x710-78b-4t2c-features-ndr-lat}
+            \label{fig:ip6-2n-skx-x710-78b-4t2c-features-ndr-lat}
     \end{figure}
 
 2n-skx-xxv710
@@ -593,7 +593,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-2n-skx-xxv710-78b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-2n-skx-xxv710-78b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -602,8 +602,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-2n-skx-xxv710-78b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:ip6-2n-skx-xxv710-78b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-2n-skx-xxv710-78b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:ip6-2n-skx-xxv710-78b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 78b-4t2c-base_and_scale
@@ -618,7 +618,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-2n-skx-xxv710-78b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-2n-skx-xxv710-78b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -627,8 +627,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-2n-skx-xxv710-78b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:ip6-2n-skx-xxv710-78b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-2n-skx-xxv710-78b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:ip6-2n-skx-xxv710-78b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 78b-2t1c-features
@@ -643,7 +643,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-2n-skx-xxv710-78b-2t1c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-2n-skx-xxv710-78b-2t1c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -652,8 +652,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-2n-skx-xxv710-78b-2t1c-features-ndr-lat50}
-            \label{fig:ip6-2n-skx-xxv710-78b-2t1c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-2n-skx-xxv710-78b-2t1c-features-ndr-lat}
+            \label{fig:ip6-2n-skx-xxv710-78b-2t1c-features-ndr-lat}
     \end{figure}
 
 78b-4t2c-features
@@ -668,7 +668,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-2n-skx-xxv710-78b-4t2c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6-2n-skx-xxv710-78b-4t2c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -677,6 +677,6 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-2n-skx-xxv710-78b-4t2c-features-ndr-lat50}
-            \label{fig:ip6-2n-skx-xxv710-78b-4t2c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6-2n-skx-xxv710-78b-4t2c-features-ndr-lat}
+            \label{fig:ip6-2n-skx-xxv710-78b-4t2c-features-ndr-lat}
     \end{figure}

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ip6_tunnels.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ip6_tunnels.rst
index dbbb592..d86db3e 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/ip6_tunnels.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ip6_tunnels.rst
@@ -25,7 +25,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6tun-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6tun-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -34,8 +34,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6tun-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:ip6tun-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6tun-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:ip6tun-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 78b-2t2c-base_and_scale
@@ -50,7 +50,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6tun-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6tun-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -59,6 +59,6 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6tun-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:ip6tun-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6tun-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:ip6tun-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat}
     \end{figure}

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ipsec.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ipsec.rst
index 76759ac..bd7a871 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/ipsec.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ipsec.rst
@@ -28,7 +28,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -37,8 +37,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t2c-base_and_scale
@@ -53,7 +53,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -62,6 +62,6 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat}
     \end{figure}

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/l2.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/l2.rst
index 8edabac..4638ef2 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/l2.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/l2.rst
@@ -25,7 +25,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -34,8 +34,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t2c-base_and_scale
@@ -50,7 +50,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -59,8 +59,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-1t1c-features
@@ -75,7 +75,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-hsw-x520-64b-1t1c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-hsw-x520-64b-1t1c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -84,8 +84,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-hsw-x520-64b-1t1c-features-ndr-lat50}
-            \label{fig:l2sw-3n-hsw-x520-64b-1t1c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-hsw-x520-64b-1t1c-features-ndr-lat}
+            \label{fig:l2sw-3n-hsw-x520-64b-1t1c-features-ndr-lat}
     \end{figure}
 
 64b-2t2c-features
@@ -100,7 +100,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-hsw-x520-64b-2t2c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-hsw-x520-64b-2t2c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -109,8 +109,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-hsw-x520-64b-2t2c-features-ndr-lat50}
-            \label{fig:l2sw-3n-hsw-x520-64b-2t2c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-hsw-x520-64b-2t2c-features-ndr-lat}
+            \label{fig:l2sw-3n-hsw-x520-64b-2t2c-features-ndr-lat}
     \end{figure}
 
 3n-hsw-x710
@@ -128,7 +128,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -137,8 +137,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t2c-base_and_scale
@@ -153,7 +153,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -162,8 +162,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-1t1c-features
@@ -178,7 +178,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-hsw-x710-64b-1t1c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-hsw-x710-64b-1t1c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -187,8 +187,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-hsw-x710-64b-1t1c-features-ndr-lat50}
-            \label{fig:l2sw-3n-hsw-x710-64b-1t1c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-hsw-x710-64b-1t1c-features-ndr-lat}
+            \label{fig:l2sw-3n-hsw-x710-64b-1t1c-features-ndr-lat}
     \end{figure}
 
 64b-2t2c-features
@@ -203,7 +203,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-hsw-x710-64b-2t2c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-hsw-x710-64b-2t2c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -212,8 +212,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-hsw-x710-64b-2t2c-features-ndr-lat50}
-            \label{fig:l2sw-3n-hsw-x710-64b-2t2c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-hsw-x710-64b-2t2c-features-ndr-lat}
+            \label{fig:l2sw-3n-hsw-x710-64b-2t2c-features-ndr-lat}
     \end{figure}
 
 3n-hsw-xl710
@@ -231,7 +231,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -240,8 +240,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t2c-base_and_scale
@@ -256,7 +256,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -265,8 +265,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 3n-skx-x710
@@ -284,7 +284,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -293,8 +293,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:l2sw-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:l2sw-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-4t2c-base_and_scale
@@ -309,7 +309,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -318,8 +318,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:l2sw-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:l2sw-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t1c-features
@@ -334,7 +334,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-skx-x710-64b-2t1c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-skx-x710-64b-2t1c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -343,8 +343,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-skx-x710-64b-2t1c-features-ndr-lat50}
-            \label{fig:l2sw-3n-skx-x710-64b-2t1c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-skx-x710-64b-2t1c-features-ndr-lat}
+            \label{fig:l2sw-3n-skx-x710-64b-2t1c-features-ndr-lat}
     \end{figure}
 
 64b-4t2c-features
@@ -359,7 +359,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-skx-x710-64b-4t2c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-skx-x710-64b-4t2c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -368,8 +368,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-skx-x710-64b-4t2c-features-ndr-lat50}
-            \label{fig:l2sw-3n-skx-x710-64b-4t2c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-skx-x710-64b-4t2c-features-ndr-lat}
+            \label{fig:l2sw-3n-skx-x710-64b-4t2c-features-ndr-lat}
     \end{figure}
 
 3n-skx-xxv710
@@ -387,7 +387,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -396,8 +396,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:l2sw-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:l2sw-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-4t2c-base_and_scale
@@ -412,7 +412,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -421,8 +421,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:l2sw-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:l2sw-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t1c-features
@@ -437,7 +437,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-skx-xxv710-64b-2t1c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-skx-xxv710-64b-2t1c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -446,8 +446,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-skx-xxv710-64b-2t1c-features-ndr-lat50}
-            \label{fig:l2sw-3n-skx-xxv710-64b-2t1c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-skx-xxv710-64b-2t1c-features-ndr-lat}
+            \label{fig:l2sw-3n-skx-xxv710-64b-2t1c-features-ndr-lat}
     \end{figure}
 
 64b-4t2c-features
@@ -462,7 +462,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-skx-xxv710-64b-4t2c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-3n-skx-xxv710-64b-4t2c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -471,8 +471,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-skx-xxv710-64b-4t2c-features-ndr-lat50}
-            \label{fig:l2sw-3n-skx-xxv710-64b-4t2c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-3n-skx-xxv710-64b-4t2c-features-ndr-lat}
+            \label{fig:l2sw-3n-skx-xxv710-64b-4t2c-features-ndr-lat}
     \end{figure}
 
 2n-skx-x710
@@ -490,7 +490,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -499,8 +499,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:l2sw-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:l2sw-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-4t2c-base_and_scale
@@ -515,7 +515,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -524,8 +524,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:l2sw-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:l2sw-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t1c-features
@@ -540,7 +540,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-2n-skx-x710-64b-2t1c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-2n-skx-x710-64b-2t1c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -549,8 +549,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-2n-skx-x710-64b-2t1c-features-ndr-lat50}
-            \label{fig:l2sw-2n-skx-x710-64b-2t1c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-2n-skx-x710-64b-2t1c-features-ndr-lat}
+            \label{fig:l2sw-2n-skx-x710-64b-2t1c-features-ndr-lat}
     \end{figure}
 
 64b-4t2c-features
@@ -565,7 +565,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-2n-skx-x710-64b-4t2c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-2n-skx-x710-64b-4t2c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -574,8 +574,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-2n-skx-x710-64b-4t2c-features-ndr-lat50}
-            \label{fig:l2sw-2n-skx-x710-64b-4t2c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-2n-skx-x710-64b-4t2c-features-ndr-lat}
+            \label{fig:l2sw-2n-skx-x710-64b-4t2c-features-ndr-lat}
     \end{figure}
 
 2n-skx-xxv710
@@ -593,7 +593,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -602,8 +602,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50}
-            \label{fig:l2sw-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat}
+            \label{fig:l2sw-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-4t2c-base_and_scale
@@ -618,7 +618,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -627,8 +627,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50}
-            \label{fig:l2sw-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
+            \label{fig:l2sw-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t1c-features
@@ -643,7 +643,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-2n-skx-xxv710-64b-2t1c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-2n-skx-xxv710-64b-2t1c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -652,8 +652,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-2n-skx-xxv710-64b-2t1c-features-ndr-lat50}
-            \label{fig:l2sw-2n-skx-xxv710-64b-2t1c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-2n-skx-xxv710-64b-2t1c-features-ndr-lat}
+            \label{fig:l2sw-2n-skx-xxv710-64b-2t1c-features-ndr-lat}
     \end{figure}
 
 64b-4t2c-features
@@ -668,7 +668,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-2n-skx-xxv710-64b-4t2c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/l2sw-2n-skx-xxv710-64b-4t2c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -677,6 +677,6 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-2n-skx-xxv710-64b-4t2c-features-ndr-lat50}
-            \label{fig:l2sw-2n-skx-xxv710-64b-4t2c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{l2sw-2n-skx-xxv710-64b-4t2c-features-ndr-lat}
+            \label{fig:l2sw-2n-skx-xxv710-64b-4t2c-features-ndr-lat}
     \end{figure}

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/srv6.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/srv6.rst
index 6ac86f2..2cb010f 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/srv6.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/srv6.rst
@@ -25,7 +25,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/srv6-3n-hsw-x520-78b-1t1c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/srv6-3n-hsw-x520-78b-1t1c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -34,8 +34,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{srv6-3n-hsw-x520-78b-1t1c-features-ndr-lat50}
-            \label{fig:srv6-3n-hsw-x520-78b-1t1c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{srv6-3n-hsw-x520-78b-1t1c-features-ndr-lat}
+            \label{fig:srv6-3n-hsw-x520-78b-1t1c-features-ndr-lat}
     \end{figure}
 
 78b-2t2c-features
@@ -50,7 +50,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/srv6-3n-hsw-x520-78b-2t2c-features-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/srv6-3n-hsw-x520-78b-2t2c-features-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -59,6 +59,6 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{srv6-3n-hsw-x520-78b-2t2c-features-ndr-lat50}
-            \label{fig:srv6-3n-hsw-x520-78b-2t2c-features-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{srv6-3n-hsw-x520-78b-2t2c-features-ndr-lat}
+            \label{fig:srv6-3n-hsw-x520-78b-2t2c-features-ndr-lat}
     \end{figure}

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/vm_vhost.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/vm_vhost.rst
index 303f421..dbeca9e 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/vm_vhost.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/vm_vhost.rst
@@ -1,5 +1,5 @@
-KVM VM vHost
-============
+KVM VMs vhost-user
+==================
 
 This section includes summary graphs of VPP Phy-to-VM(s)-to-Phy packet
 latency with with VM virtio and VPP vhost-user virtual interfaces
@@ -26,7 +26,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -35,8 +35,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:vhost-l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:vhost-l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t2c-base_and_scale-l2sw
@@ -51,7 +51,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -60,8 +60,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:vhost-l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:vhost-l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-1t1c-base_and_scale-ip4
@@ -76,7 +76,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -85,8 +85,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:vhost-ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:vhost-ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t2c-base_and_scale-ip4
@@ -101,7 +101,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -110,8 +110,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:vhost-ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:vhost-ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 3n-hsw-x710
@@ -129,7 +129,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -138,8 +138,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:vhost-l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:vhost-l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t2c-base_and_scale-l2sw
@@ -154,7 +154,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -163,8 +163,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:vhost-l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:vhost-l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-1t1c-base_and_scale-ip4
@@ -179,7 +179,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -188,8 +188,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:vhost-ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:vhost-ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t2c-base_and_scale-ip4
@@ -204,7 +204,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -213,8 +213,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:vhost-ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:vhost-ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 3n-hsw-xl710
@@ -232,7 +232,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -241,8 +241,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:vhost-l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:vhost-l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t2c-base_and_scale-l2sw
@@ -257,7 +257,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -266,8 +266,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:vhost-l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:vhost-l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-1t1c-base_and_scale-ip4
@@ -282,7 +282,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -291,8 +291,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50}
-            \label{fig:vhost-ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat}
+            \label{fig:vhost-ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat}
     \end{figure}
 
 64b-2t2c-base_and_scale-ip4
@@ -307,7 +307,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vhost-ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -316,6 +316,6 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50}
-            \label{fig:vhost-ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vhost-ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat}
+            \label{fig:vhost-ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat}
     \end{figure}

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/vts.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/vts.rst
index 4eb2147..977b926 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/vts.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/vts.rst
@@ -26,7 +26,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vts-3n-hsw-x520-64b-1t1c-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vts-3n-hsw-x520-64b-1t1c-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -35,8 +35,8 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vts-3n-hsw-x520-64b-1t1c-ndr-lat50}
-            \label{fig:vts-3n-hsw-x520-64b-1t1c-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vts-3n-hsw-x520-64b-1t1c-ndr-lat}
+            \label{fig:vts-3n-hsw-x520-64b-1t1c-ndr-lat}
     \end{figure}
 
 64b-2t2c
@@ -51,7 +51,7 @@ CSIT source code for the test cases used for plots can be found in
 .. raw:: html
 
     </b>
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vts-3n-hsw-x520-64b-2t2c-ndr-lat50.html"></iframe>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/vts-3n-hsw-x520-64b-2t2c-ndr-lat.html"></iframe>
     <p><br><br></p>
     </center>
 
@@ -60,6 +60,6 @@ CSIT source code for the test cases used for plots can be found in
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vts-3n-hsw-x520-64b-2t2c-ndr-lat50}
-            \label{fig:vts-3n-hsw-x520-64b-2t2c-ndr-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{vts-3n-hsw-x520-64b-2t2c-ndr-lat}
+            \label{fig:vts-3n-hsw-x520-64b-2t2c-ndr-lat}
     \end{figure}

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/vm_vhost.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/vm_vhost.rst
index ed0b6cc..2029254 100644 (file)
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/vm_vhost.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/vm_vhost.rst
@@ -1,5 +1,5 @@
-KVM VM vHost
-============
+KVM VMs vhost-user
+==================
 
 Following sections include summary graphs of VPP Phy-to-VM(s)-to-Phy
 performance with VM virtio and VPP vhost-user virtual interfaces,

diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/vm_vhost.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/vm_vhost.rst
index 6d1880e..6902c1b 100644 (file)
--- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/vm_vhost.rst
+++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/vm_vhost.rst
@@ -1,5 +1,5 @@
-KVM VM vHost
-============
+KVM VMs vhost-user
+==================
 
 Following sections include Throughput Speedup Analysis for VPP multi-
 core multi-thread configurations with no Hyper-Threading, specifically

diff --git a/resources/tools/presentation/generator_plots.py b/resources/tools/presentation/generator_plots.py
index aaee31f..52348fe 100644 (file)
--- a/resources/tools/presentation/generator_plots.py
+++ b/resources/tools/presentation/generator_plots.py
@@ -59,8 +59,9 @@ def plot_performance_box(plot, input_data):
                  format(plot.get("title", "")))
 
     # Transform the data
+    plot_title = plot.get("title", "")
     logging.info("    Creating the data set for the {0} '{1}'.".
-                 format(plot.get("type", ""), plot.get("title", "")))
+                 format(plot.get("type", ""), plot_title))
     data = input_data.filter_data(plot)
     if data is None:
         logging.error("No data.")
@@ -74,7 +75,21 @@ def plot_performance_box(plot, input_data):
                 if y_vals.get(test["parent"], None) is None:
                     y_vals[test["parent"]] = list()
                 try:
-                    y_vals[test["parent"]].append(test["throughput"]["value"])
+                    # TODO: Remove when definitely no NDRPDRDISC tests are used:
+                    if test["type"] in ("NDR", "PDR"):
+                        y_vals[test["parent"]].\
+                            append(test["throughput"]["value"])
+                    elif test["type"] in ("NDRPDR", ):
+                        if "-pdr" in plot_title.lower():
+                            y_vals[test["parent"]].\
+                                append(test["throughput"]["PDR"]["LOWER"])
+                        elif "-ndr" in plot_title.lower():
+                            y_vals[test["parent"]]. \
+                                append(test["throughput"]["NDR"]["LOWER"])
+                        else:
+                            continue
+                    else:
+                        continue
                 except (KeyError, TypeError):
                     y_vals[test["parent"]].append(None)
 
@@ -92,7 +107,8 @@ def plot_performance_box(plot, input_data):
     df = pd.DataFrame(y_vals)
     df.head()
     for i, col in enumerate(df.columns):
-        name = "{0}. {1}".format(i + 1, col.lower().replace('-ndrpdrdisc', ''))
+        name = "{0}. {1}".format(i + 1, col.lower().replace('-ndrpdrdisc', '').
+                                 replace('-ndrpdr', ''))
         traces.append(plgo.Box(x=[str(i + 1) + '.'] * len(df[col]),
                                y=df[col],
                                name=name,
@@ -131,8 +147,9 @@ def plot_latency_box(plot, input_data):
                  format(plot.get("title", "")))
 
     # Transform the data
+    plot_title = plot.get("title", "")
     logging.info("    Creating the data set for the {0} '{1}'.".
-                 format(plot.get("type", ""), plot.get("title", "")))
+                 format(plot.get("type", ""), plot_title))
     data = input_data.filter_data(plot)
     if data is None:
         logging.error("No data.")
@@ -153,18 +170,41 @@ def plot_latency_box(plot, input_data):
                         list()   # direction2, max
                     ]
                 try:
-                    y_tmp_vals[test["parent"]][0].append(
-                        test["latency"]["direction1"]["50"]["min"])
-                    y_tmp_vals[test["parent"]][1].append(
-                        test["latency"]["direction1"]["50"]["avg"])
-                    y_tmp_vals[test["parent"]][2].append(
-                        test["latency"]["direction1"]["50"]["max"])
-                    y_tmp_vals[test["parent"]][3].append(
-                        test["latency"]["direction2"]["50"]["min"])
-                    y_tmp_vals[test["parent"]][4].append(
-                        test["latency"]["direction2"]["50"]["avg"])
-                    y_tmp_vals[test["parent"]][5].append(
-                        test["latency"]["direction2"]["50"]["max"])
+                    # TODO: Remove when definitely no NDRPDRDISC tests are used:
+                    if test["type"] in ("NDR", "PDR"):
+                        y_tmp_vals[test["parent"]][0].append(
+                            test["latency"]["direction1"]["50"]["min"])
+                        y_tmp_vals[test["parent"]][1].append(
+                            test["latency"]["direction1"]["50"]["avg"])
+                        y_tmp_vals[test["parent"]][2].append(
+                            test["latency"]["direction1"]["50"]["max"])
+                        y_tmp_vals[test["parent"]][3].append(
+                            test["latency"]["direction2"]["50"]["min"])
+                        y_tmp_vals[test["parent"]][4].append(
+                            test["latency"]["direction2"]["50"]["avg"])
+                        y_tmp_vals[test["parent"]][5].append(
+                            test["latency"]["direction2"]["50"]["max"])
+                    elif test["type"] in ("NDRPDR", ):
+                        if "-pdr" in plot_title.lower():
+                            ttype = "PDR"
+                        elif "-ndr" in plot_title.lower():
+                            ttype = "NDR"
+                        else:
+                            continue
+                        y_tmp_vals[test["parent"]][0].append(
+                            test["latency"][ttype]["direction1"]["min"])
+                        y_tmp_vals[test["parent"]][1].append(
+                            test["latency"][ttype]["direction1"]["avg"])
+                        y_tmp_vals[test["parent"]][2].append(
+                            test["latency"][ttype]["direction1"]["max"])
+                        y_tmp_vals[test["parent"]][3].append(
+                            test["latency"][ttype]["direction2"]["min"])
+                        y_tmp_vals[test["parent"]][4].append(
+                            test["latency"][ttype]["direction2"]["avg"])
+                        y_tmp_vals[test["parent"]][5].append(
+                            test["latency"][ttype]["direction2"]["max"])
+                    else:
+                        continue
                 except (KeyError, TypeError):
                     pass
 
@@ -190,7 +230,8 @@ def plot_latency_box(plot, input_data):
         return
 
     for i, col in enumerate(df.columns):
-        name = "{0}. {1}".format(i + 1, col.lower().replace('-ndrpdrdisc', ''))
+        name = "{0}. {1}".format(i + 1, col.lower().replace('-ndrpdrdisc', '').
+                                 replace('-ndrpdr', ''))
         traces.append(plgo.Box(x=['TGint1-to-SUT1-to-SUT2-to-TGint2',
                                   'TGint1-to-SUT1-to-SUT2-to-TGint2',
                                   'TGint1-to-SUT1-to-SUT2-to-TGint2',
@@ -240,8 +281,9 @@ def plot_throughput_speedup_analysis(plot, input_data):
                  format(plot.get("title", "")))
 
     # Transform the data
+    plot_title = plot.get("title", "")
     logging.info("    Creating the data set for the {0} '{1}'.".
-                 format(plot.get("type", ""), plot.get("title", "")))
+                 format(plot.get("type", ""), plot_title))
     data = input_data.filter_data(plot)
     if data is None:
         logging.error("No data.")
@@ -256,15 +298,33 @@ def plot_throughput_speedup_analysis(plot, input_data):
                                                   "2": list(),
                                                   "4": list()}
                 try:
-                    if "1T1C" in test["tags"]:
-                        throughput[test["parent"]]["1"].\
-                            append(test["throughput"]["value"])
-                    elif "2T2C" in test["tags"]:
-                        throughput[test["parent"]]["2"]. \
-                            append(test["throughput"]["value"])
-                    elif "4T4C" in test["tags"]:
-                        throughput[test["parent"]]["4"]. \
-                            append(test["throughput"]["value"])
+                    # TODO: Remove when definitely no NDRPDRDISC tests are used:
+                    if test["type"] in ("NDR", "PDR"):
+                        if "1T1C" in test["tags"]:
+                            throughput[test["parent"]]["1"].\
+                                append(test["throughput"]["value"])
+                        elif "2T2C" in test["tags"]:
+                            throughput[test["parent"]]["2"]. \
+                                append(test["throughput"]["value"])
+                        elif "4T4C" in test["tags"]:
+                            throughput[test["parent"]]["4"]. \
+                                append(test["throughput"]["value"])
+                    elif test["type"] in ("NDRPDR", ):
+                        if "-pdr" in plot_title.lower():
+                            ttype = "PDR"
+                        elif "-ndr" in plot_title.lower():
+                            ttype = "NDR"
+                        else:
+                            continue
+                        if "1T1C" in test["tags"]:
+                            throughput[test["parent"]]["1"].\
+                                append(test["throughput"][ttype]["LOWER"])
+                        elif "2T2C" in test["tags"]:
+                            throughput[test["parent"]]["2"]. \
+                                append(test["throughput"][ttype]["LOWER"])
+                        elif "4T4C" in test["tags"]:
+                            throughput[test["parent"]]["4"]. \
+                                append(test["throughput"][ttype]["LOWER"])
                 except (KeyError, TypeError):
                     pass
 
@@ -356,7 +416,7 @@ def plot_http_server_performance_box(plot, input_data):
                 if y_vals.get(test["name"], None) is None:
                     y_vals[test["name"]] = list()
                 try:
-                    y_vals[test["name"]].append(test["result"]["value"])
+                    y_vals[test["name"]].append(test["result"])
                 except (KeyError, TypeError):
                     y_vals[test["name"]].append(None)
 

diff --git a/resources/tools/presentation/generator_tables.py b/resources/tools/presentation/generator_tables.py
index 5c38c1e..cd61e32 100644 (file)
--- a/resources/tools/presentation/generator_tables.py
+++ b/resources/tools/presentation/generator_tables.py
@@ -334,6 +334,8 @@ def table_performance_improvements(table, input_data):
 def _read_csv_template(file_name):
     """Read the template from a .csv file.
 
+    # FIXME: Not used now.
+
     :param file_name: Name / full path / relative path of the file to read.
     :type file_name: str
     :returns: Data from the template as list (lines) of lists (items on line).
@@ -373,16 +375,21 @@ def table_performance_comparison(table, input_data):
     try:
         header = ["Test case", ]
 
+        if table["include-tests"] == "MRR":
+            hdr_param = "Receive Rate"
+        else:
+            hdr_param = "Throughput"
+
         history = table.get("history", None)
         if history:
             for item in history:
                 header.extend(
-                    ["{0} Throughput [Mpps]".format(item["title"]),
+                    ["{0} {1} [Mpps]".format(item["title"], hdr_param),
                      "{0} Stdev [Mpps]".format(item["title"])])
         header.extend(
-            ["{0} Throughput [Mpps]".format(table["reference"]["title"]),
+            ["{0} {1} [Mpps]".format(table["reference"]["title"], hdr_param),
              "{0} Stdev [Mpps]".format(table["reference"]["title"]),
-             "{0} Throughput [Mpps]".format(table["compare"]["title"]),
+             "{0} {1} [Mpps]".format(table["compare"]["title"], hdr_param),
              "{0} Stdev [Mpps]".format(table["compare"]["title"]),
              "Change [%]"])
         header_str = ",".join(header) + "\n"
@@ -396,45 +403,116 @@ def table_performance_comparison(table, input_data):
     for job, builds in table["reference"]["data"].items():
         for build in builds:
             for tst_name, tst_data in data[job][str(build)].iteritems():
-                if tbl_dict.get(tst_name, None) is None:
+                tst_name_mod = tst_name.replace("-ndrpdrdisc", "").\
+                    replace("-ndrpdr", "").replace("-pdrdisc", "").\
+                    replace("-ndrdisc", "").replace("-pdr", "").\
+                    replace("-ndr", "")
+                if tbl_dict.get(tst_name_mod, None) is None:
                     name = "{0}-{1}".format(tst_data["parent"].split("-")[0],
                                             "-".join(tst_data["name"].
-                                                     split("-")[1:]))
-                    tbl_dict[tst_name] = {"name": name,
-                                          "ref-data": list(),
-                                          "cmp-data": list()}
+                                                     split("-")[:-1]))
+                    tbl_dict[tst_name_mod] = {"name": name,
+                                              "ref-data": list(),
+                                              "cmp-data": list()}
                 try:
-                    tbl_dict[tst_name]["ref-data"].\
-                        append(tst_data["throughput"]["value"])
+                    # TODO: Re-work when NDRPDRDISC tests are not used
+                    if table["include-tests"] == "MRR":
+                        tbl_dict[tst_name_mod]["ref-data"]. \
+                            append(tst_data["result"]["receive-rate"].avg)
+                    elif table["include-tests"] == "PDR":
+                        if tst_data["type"] == "PDR":
+                            tbl_dict[tst_name_mod]["ref-data"]. \
+                                append(tst_data["throughput"]["value"])
+                        elif tst_data["type"] == "NDRPDR":
+                            tbl_dict[tst_name_mod]["ref-data"].append(
+                                tst_data["throughput"]["PDR"]["LOWER"])
+                    elif table["include-tests"] == "NDR":
+                        if tst_data["type"] == "NDR":
+                            tbl_dict[tst_name_mod]["ref-data"]. \
+                                append(tst_data["throughput"]["value"])
+                        elif tst_data["type"] == "NDRPDR":
+                            tbl_dict[tst_name_mod]["ref-data"].append(
+                                tst_data["throughput"]["NDR"]["LOWER"])
+                    else:
+                        continue
                 except TypeError:
                     pass  # No data in output.xml for this test
 
     for job, builds in table["compare"]["data"].items():
         for build in builds:
             for tst_name, tst_data in data[job][str(build)].iteritems():
+                tst_name_mod = tst_name.replace("-ndrpdrdisc", ""). \
+                    replace("-ndrpdr", "").replace("-pdrdisc", ""). \
+                    replace("-ndrdisc", "").replace("-pdr", ""). \
+                    replace("-ndr", "")
                 try:
-                    tbl_dict[tst_name]["cmp-data"].\
-                        append(tst_data["throughput"]["value"])
+                    # TODO: Re-work when NDRPDRDISC tests are not used
+                    if table["include-tests"] == "MRR":
+                        tbl_dict[tst_name_mod]["cmp-data"]. \
+                            append(tst_data["result"]["receive-rate"].avg)
+                    elif table["include-tests"] == "PDR":
+                        if tst_data["type"] == "PDR":
+                            tbl_dict[tst_name_mod]["cmp-data"]. \
+                                append(tst_data["throughput"]["value"])
+                        elif tst_data["type"] == "NDRPDR":
+                            tbl_dict[tst_name_mod]["cmp-data"].append(
+                                tst_data["throughput"]["PDR"]["LOWER"])
+                    elif table["include-tests"] == "NDR":
+                        if tst_data["type"] == "NDR":
+                            tbl_dict[tst_name_mod]["cmp-data"]. \
+                                append(tst_data["throughput"]["value"])
+                        elif tst_data["type"] == "NDRPDR":
+                            tbl_dict[tst_name_mod]["cmp-data"].append(
+                                tst_data["throughput"]["NDR"]["LOWER"])
+                    else:
+                        continue
                 except KeyError:
                     pass
                 except TypeError:
-                    tbl_dict.pop(tst_name, None)
+                    tbl_dict.pop(tst_name_mod, None)
     if history:
         for item in history:
             for job, builds in item["data"].items():
                 for build in builds:
                     for tst_name, tst_data in data[job][str(build)].iteritems():
-                        if tbl_dict.get(tst_name, None) is None:
+                        tst_name_mod = tst_name.replace("-ndrpdrdisc", ""). \
+                            replace("-ndrpdr", "").replace("-pdrdisc", ""). \
+                            replace("-ndrdisc", "").replace("-pdr", ""). \
+                            replace("-ndr", "")
+                        if tbl_dict.get(tst_name_mod, None) is None:
                             continue
-                        if tbl_dict[tst_name].get("history", None) is None:
-                            tbl_dict[tst_name]["history"] = OrderedDict()
-                        if tbl_dict[tst_name]["history"].get(item["title"],
+                        if tbl_dict[tst_name_mod].get("history", None) is None:
+                            tbl_dict[tst_name_mod]["history"] = OrderedDict()
+                        if tbl_dict[tst_name_mod]["history"].get(item["title"],
                                                              None) is None:
-                            tbl_dict[tst_name]["history"][item["title"]] = \
+                            tbl_dict[tst_name_mod]["history"][item["title"]] = \
                                 list()
                         try:
-                            tbl_dict[tst_name]["history"][item["title"]].\
-                                append(tst_data["throughput"]["value"])
+                            # TODO: Re-work when NDRPDRDISC tests are not used
+                            if table["include-tests"] == "MRR":
+                                tbl_dict[tst_name_mod]["history"][item["title"
+                                ]].append(tst_data["result"]["receive-rate"].
+                                          avg)
+                            elif table["include-tests"] == "PDR":
+                                if tst_data["type"] == "PDR":
+                                    tbl_dict[tst_name_mod]["history"][
+                                        item["title"]].\
+                                        append(tst_data["throughput"]["value"])
+                                elif tst_data["type"] == "NDRPDR":
+                                    tbl_dict[tst_name_mod]["history"][item[
+                                        "title"]].append(tst_data["throughput"][
+                                        "PDR"]["LOWER"])
+                            elif table["include-tests"] == "NDR":
+                                if tst_data["type"] == "NDR":
+                                    tbl_dict[tst_name_mod]["history"][
+                                        item["title"]].\
+                                        append(tst_data["throughput"]["value"])
+                                elif tst_data["type"] == "NDRPDR":
+                                    tbl_dict[tst_name_mod]["history"][item[
+                                        "title"]].append(tst_data["throughput"][
+                                        "NDR"]["LOWER"])
+                            else:
+                                continue
                         except (TypeError, KeyError):
                             pass
 
@@ -471,213 +549,14 @@ def table_performance_comparison(table, input_data):
     # Sort the table according to the relative change
     tbl_lst.sort(key=lambda rel: rel[-1], reverse=True)
 
-    # Generate tables:
-    # All tests in csv:
-    tbl_names = ["{0}-ndr-1t1c-full{1}".format(table["output-file"],
-                                               table["output-file-ext"]),
-                 "{0}-ndr-2t2c-full{1}".format(table["output-file"],
-                                               table["output-file-ext"]),
-                 "{0}-ndr-4t4c-full{1}".format(table["output-file"],
-                                               table["output-file-ext"]),
-                 "{0}-pdr-1t1c-full{1}".format(table["output-file"],
-                                               table["output-file-ext"]),
-                 "{0}-pdr-2t2c-full{1}".format(table["output-file"],
-                                               table["output-file-ext"]),
-                 "{0}-pdr-4t4c-full{1}".format(table["output-file"],
-                                               table["output-file-ext"])
-                 ]
-    for file_name in tbl_names:
-        logging.info("      Writing file: '{0}'".format(file_name))
-        with open(file_name, "w") as file_handler:
-            file_handler.write(header_str)
-            for test in tbl_lst:
-                if (file_name.split("-")[-3] in test[0] and    # NDR vs PDR
-                        file_name.split("-")[-2] in test[0]):  # cores
-                    test[0] = "-".join(test[0].split("-")[:-1])
-                    file_handler.write(",".join([str(item) for item in test]) +
-                                       "\n")
-
-    # All tests in txt:
-    tbl_names_txt = ["{0}-ndr-1t1c-full.txt".format(table["output-file"]),
-                     "{0}-ndr-2t2c-full.txt".format(table["output-file"]),
-                     "{0}-ndr-4t4c-full.txt".format(table["output-file"]),
-                     "{0}-pdr-1t1c-full.txt".format(table["output-file"]),
-                     "{0}-pdr-2t2c-full.txt".format(table["output-file"]),
-                     "{0}-pdr-4t4c-full.txt".format(table["output-file"])
-                     ]
-
-    for i, txt_name in enumerate(tbl_names_txt):
-        logging.info("      Writing file: '{0}'".format(txt_name))
-        convert_csv_to_pretty_txt(tbl_names[i], txt_name)
-
-    # Selected tests in csv:
-    input_file = "{0}-ndr-1t1c-full{1}".format(table["output-file"],
-                                               table["output-file-ext"])
-    with open(input_file, "r") as in_file:
-        lines = list()
-        for line in in_file:
-            lines.append(line)
-
-    output_file = "{0}-ndr-1t1c-top{1}".format(table["output-file"],
-                                               table["output-file-ext"])
-    logging.info("      Writing file: '{0}'".format(output_file))
-    with open(output_file, "w") as out_file:
-        out_file.write(header_str)
-        for i, line in enumerate(lines[1:]):
-            if i == table["nr-of-tests-shown"]:
-                break
-            out_file.write(line)
-
-    output_file = "{0}-ndr-1t1c-bottom{1}".format(table["output-file"],
-                                                  table["output-file-ext"])
-    logging.info("      Writing file: '{0}'".format(output_file))
-    with open(output_file, "w") as out_file:
-        out_file.write(header_str)
-        for i, line in enumerate(lines[-1:0:-1]):
-            if i == table["nr-of-tests-shown"]:
-                break
-            out_file.write(line)
-
-    input_file = "{0}-pdr-1t1c-full{1}".format(table["output-file"],
-                                               table["output-file-ext"])
-    with open(input_file, "r") as in_file:
-        lines = list()
-        for line in in_file:
-            lines.append(line)
-
-    output_file = "{0}-pdr-1t1c-top{1}".format(table["output-file"],
-                                               table["output-file-ext"])
-    logging.info("      Writing file: '{0}'".format(output_file))
-    with open(output_file, "w") as out_file:
-        out_file.write(header_str)
-        for i, line in enumerate(lines[1:]):
-            if i == table["nr-of-tests-shown"]:
-                break
-            out_file.write(line)
-
-    output_file = "{0}-pdr-1t1c-bottom{1}".format(table["output-file"],
-                                                  table["output-file-ext"])
-    logging.info("      Writing file: '{0}'".format(output_file))
-    with open(output_file, "w") as out_file:
-        out_file.write(header_str)
-        for i, line in enumerate(lines[-1:0:-1]):
-            if i == table["nr-of-tests-shown"]:
-                break
-            out_file.write(line)
-
-
-def table_performance_comparison_mrr(table, input_data):
-    """Generate the table(s) with algorithm: table_performance_comparison_mrr
-    specified in the specification file.
-
-    :param table: Table to generate.
-    :param input_data: Data to process.
-    :type table: pandas.Series
-    :type input_data: InputData
-    """
-
-    logging.info("  Generating the table {0} ...".
-                 format(table.get("title", "")))
-
-    # Transform the data
-    logging.info("    Creating the data set for the {0} '{1}'.".
-                 format(table.get("type", ""), table.get("title", "")))
-    data = input_data.filter_data(table, continue_on_error=True)
-
-    # Prepare the header of the tables
-    try:
-        header = ["Test case",
-                  "{0} Throughput [Mpps]".format(table["reference"]["title"]),
-                  "{0} stdev [Mpps]".format(table["reference"]["title"]),
-                  "{0} Throughput [Mpps]".format(table["compare"]["title"]),
-                  "{0} stdev [Mpps]".format(table["compare"]["title"]),
-                  "Change [%]"]
-        header_str = ",".join(header) + "\n"
-    except (AttributeError, KeyError) as err:
-        logging.error("The model is invalid, missing parameter: {0}".
-                      format(err))
-        return
-
-    # Prepare data to the table:
-    tbl_dict = dict()
-    for job, builds in table["reference"]["data"].items():
-        for build in builds:
-            for tst_name, tst_data in data[job][str(build)].iteritems():
-                if tbl_dict.get(tst_name, None) is None:
-                    name = "{0}-{1}".format(tst_data["parent"].split("-")[0],
-                                            "-".join(tst_data["name"].
-                                                     split("-")[1:]))
-                    tbl_dict[tst_name] = {"name": name,
-                                          "ref-data": list(),
-                                          "cmp-data": list()}
-                try:
-                    tbl_dict[tst_name]["ref-data"].\
-                        append(tst_data["result"]["receive-rate"].avg)
-                except TypeError:
-                    pass  # No data in output.xml for this test
-
-    for job, builds in table["compare"]["data"].items():
-        for build in builds:
-            for tst_name, tst_data in data[job][str(build)].iteritems():
-                try:
-                    tbl_dict[tst_name]["cmp-data"].\
-                        append(tst_data["result"]["receive-rate"].avg)
-                except KeyError:
-                    pass
-                except TypeError:
-                    tbl_dict.pop(tst_name, None)
-
-    tbl_lst = list()
-    for tst_name in tbl_dict.keys():
-        item = [tbl_dict[tst_name]["name"], ]
-        data_t = tbl_dict[tst_name]["ref-data"]
-        if data_t:
-            item.append(round(mean(data_t) / 1000000, 2))
-            item.append(round(stdev(data_t) / 1000000, 2))
-        else:
-            item.extend([None, None])
-        data_t = tbl_dict[tst_name]["cmp-data"]
-        if data_t:
-            item.append(round(mean(data_t) / 1000000, 2))
-            item.append(round(stdev(data_t) / 1000000, 2))
-        else:
-            item.extend([None, None])
-        if item[1] is not None and item[3] is not None and item[1] != 0:
-            item.append(int(relative_change(float(item[1]), float(item[3]))))
-        if len(item) == 6:
-            tbl_lst.append(item)
-
-    # Sort the table according to the relative change
-    tbl_lst.sort(key=lambda rel: rel[-1], reverse=True)
-
-    # Generate tables:
-    # All tests in csv:
-    tbl_names = ["{0}-1t1c-full{1}".format(table["output-file"],
-                                           table["output-file-ext"]),
-                 "{0}-2t2c-full{1}".format(table["output-file"],
-                                           table["output-file-ext"]),
-                 "{0}-4t4c-full{1}".format(table["output-file"],
-                                           table["output-file-ext"])
-                 ]
-    for file_name in tbl_names:
-        logging.info("      Writing file: '{0}'".format(file_name))
-        with open(file_name, "w") as file_handler:
-            file_handler.write(header_str)
-            for test in tbl_lst:
-                if file_name.split("-")[-2] in test[0]:  # cores
-                    test[0] = "-".join(test[0].split("-")[:-1])
-                    file_handler.write(",".join([str(item) for item in test]) +
-                                       "\n")
-
-    # All tests in txt:
-    tbl_names_txt = ["{0}-1t1c-full.txt".format(table["output-file"]),
-                     "{0}-2t2c-full.txt".format(table["output-file"]),
-                     "{0}-4t4c-full.txt".format(table["output-file"])
-                     ]
+    # Generate csv tables:
+    csv_file = "{0}.csv".format(table["output-file"])
+    with open(csv_file, "w") as file_handler:
+        file_handler.write(header_str)
+        for test in tbl_lst:
+            file_handler.write(",".join([str(item) for item in test]) + "\n")
 
-    for i, txt_name in enumerate(tbl_names_txt):
-        logging.info("      Writing file: '{0}'".format(txt_name))
-        convert_csv_to_pretty_txt(tbl_names[i], txt_name)
+    convert_csv_to_pretty_txt(csv_file, "{0}.txt".format(table["output-file"]))
 
 
 def table_performance_trending_dashboard(table, input_data):
@@ -722,7 +601,7 @@ def table_performance_trending_dashboard(table, input_data):
                     tbl_dict[tst_name] = {"name": name,
                                           "data": OrderedDict()}
                 try:
-                    tbl_dict[tst_name]["data"][str(build)] =  \
+                    tbl_dict[tst_name]["data"][str(build)] = \
                         tst_data["result"]["receive-rate"]
                 except (TypeError, KeyError):
                     pass  # No data in output.xml for this test

diff --git a/resources/tools/presentation/input_data_parser.py b/resources/tools/presentation/input_data_parser.py
index e0393a8..4a72266 100644 (file)
--- a/resources/tools/presentation/input_data_parser.py
+++ b/resources/tools/presentation/input_data_parser.py
@@ -65,13 +65,91 @@ class ExecutionChecker(ResultVisitor):
             }
         }
         "tests": {
+            # NDRPDR tests:
             "ID": {
                 "name": "Test name",
                 "parent": "Name of the parent of the test",
-                "doc": "Test documentation"
-                "msg": "Test message"
+                "doc": "Test documentation",
+                "msg": "Test message",
+                "vat-history": "DUT1 and DUT2 VAT History",
+                "show-run": "Show Run",
+                "tags": ["tag 1", "tag 2", "tag n"],
+                "type": "NDRPDR",
+                "status": "PASS" | "FAIL",
+                "throughput": {
+                    "NDR": {
+                        "LOWER": float,
+                        "UPPER": float
+                    },
+                    "PDR": {
+                        "LOWER": float,
+                        "UPPER": float
+                    }
+                },
+                "latency": {
+                    "NDR": {
+                        "direction1": {
+                            "min": float,
+                            "avg": float,
+                            "max": float
+                        },
+                        "direction2": {
+                            "min": float,
+                            "avg": float,
+                            "max": float
+                        }
+                    },
+                    "PDR": {
+                        "direction1": {
+                            "min": float,
+                            "avg": float,
+                            "max": float
+                        },
+                        "direction2": {
+                            "min": float,
+                            "avg": float,
+                            "max": float
+                        }
+                    }
+                }
+            }
+
+            # TCP tests:
+            "ID": {
+                "name": "Test name",
+                "parent": "Name of the parent of the test",
+                "doc": "Test documentation",
+                "msg": "Test message",
+                "tags": ["tag 1", "tag 2", "tag n"],
+                "type": "TCP",
+                "status": "PASS" | "FAIL",
+                "result": int
+            }
+
+            # MRR, BMRR tests:
+            "ID": {
+                "name": "Test name",
+                "parent": "Name of the parent of the test",
+                "doc": "Test documentation",
+                "msg": "Test message",
                 "tags": ["tag 1", "tag 2", "tag n"],
-                "type": "PDR" | "NDR" | "TCP" | "MRR" | "BMRR",
+                "type": "MRR" | "BMRR",
+                "status": "PASS" | "FAIL",
+                "result": {
+                    "receive-rate": AvgStdevMetadata,
+                }
+            }
+
+            # TODO: Remove when definitely no NDRPDRDISC tests are used:
+            # NDRPDRDISC tests:
+            "ID": {
+                "name": "Test name",
+                "parent": "Name of the parent of the test",
+                "doc": "Test documentation",
+                "msg": "Test message",
+                "tags": ["tag 1", "tag 2", "tag n"],
+                "type": "PDR" | "NDR",
+                "status": "PASS" | "FAIL",
                 "throughput": {  # Only type: "PDR" | "NDR"
                     "value": int,
                     "unit": "pps" | "bps" | "percentage"
@@ -112,13 +190,6 @@ class ExecutionChecker(ResultVisitor):
                         }
                     }
                 },
-                "result": {  # Only type: "TCP"
-                    "value": int,
-                    "unit": "cps" | "rps"
-                },
-                "result": {  # Only type: "MRR" | "BMRR"
-                    "receive-rate": AvgStdevMetadata,
-                },
                 "lossTolerance": "lossTolerance",  # Only type: "PDR"
                 "vat-history": "DUT1 and DUT2 VAT History"
                 "show-run": "Show Run"
@@ -170,8 +241,15 @@ class ExecutionChecker(ResultVisitor):
     .. note:: ID is the lowercase full path to the test.
     """
 
+    # TODO: Remove when definitely no NDRPDRDISC tests are used:
     REGEX_RATE = re.compile(r'^[\D\d]*FINAL_RATE:\s(\d+\.\d+)\s(\w+)')
 
+    REGEX_NDRPDR_RATE = re.compile(r'NDR_LOWER:\s(\d+.\d+).*\n.*\n'
+                                   r'NDR_UPPER:\s(\d+.\d+).*\n'
+                                   r'PDR_LOWER:\s(\d+.\d+).*\n.*\n'
+                                   r'PDR_UPPER:\s(\d+.\d+)')
+
+    # TODO: Remove when definitely no NDRPDRDISC tests are used:
     REGEX_LAT_NDR = re.compile(r'^[\D\d]*'
                                r'LAT_\d+%NDR:\s\[\'(-?\d+/-?\d+/-?\d+)\','
                                r'\s\'(-?\d+/-?\d+/-?\d+)\'\]\s\n'
@@ -184,6 +262,9 @@ class ExecutionChecker(ResultVisitor):
                                r'LAT_\d+%PDR:\s\[\'(-?\d+/-?\d+/-?\d+)\','
                                r'\s\'(-?\d+/-?\d+/-?\d+)\'\][\D\d]*')
 
+    REGEX_NDRPDR_LAT = re.compile(r'LATENCY.*\[\'(.*)\', \'(.*)\'\]\s\n.*\n.*\n'
+                                  r'LATENCY.*\[\'(.*)\', \'(.*)\'\]')
+
     REGEX_TOLERANCE = re.compile(r'^[\D\d]*LOSS_ACCEPTANCE:\s(\d*\.\d*)\s'
                                  r'[\D\d]*')
 
@@ -363,6 +444,7 @@ class ExecutionChecker(ResultVisitor):
                 except KeyError:
                     pass
 
+    # TODO: Remove when definitely no NDRPDRDISC tests are used:
     def _get_latency(self, msg, test_type):
         """Get the latency data from the test message.
 
@@ -409,6 +491,74 @@ class ExecutionChecker(ResultVisitor):
 
         return latency
 
+    def _get_ndrpdr_throughput(self, msg):
+        """Get NDR_LOWER, NDR_UPPER, PDR_LOWER and PDR_UPPER from the test
+        message.
+
+        :param msg: The test message to be parsed.
+        :type msg: str
+        :returns: Parsed data as a dict and the status (PASS/FAIL).
+        :rtype: tuple(dict, str)
+        """
+
+        throughput = {
+            "NDR": {"LOWER": -1.0, "UPPER": -1.0},
+            "PDR": {"LOWER": -1.0, "UPPER": -1.0}
+        }
+        status = "FAIL"
+        groups = re.search(self.REGEX_NDRPDR_RATE, msg)
+
+        if groups is not None:
+            try:
+                throughput["NDR"]["LOWER"] = float(groups.group(1))
+                throughput["NDR"]["UPPER"] = float(groups.group(2))
+                throughput["PDR"]["LOWER"] = float(groups.group(3))
+                throughput["PDR"]["UPPER"] = float(groups.group(4))
+                status = "PASS"
+            except (IndexError, ValueError):
+                pass
+
+        return throughput, status
+
+    def _get_ndrpdr_latency(self, msg):
+        """Get LATENCY from the test message.
+
+        :param msg: The test message to be parsed.
+        :type msg: str
+        :returns: Parsed data as a dict and the status (PASS/FAIL).
+        :rtype: tuple(dict, str)
+        """
+
+        latency = {
+            "NDR": {
+                "direction1": {"min": -1.0, "avg": -1.0, "max": -1.0},
+                "direction2": {"min": -1.0, "avg": -1.0, "max": -1.0}
+            },
+            "PDR": {
+                "direction1": {"min": -1.0, "avg": -1.0, "max": -1.0},
+                "direction2": {"min": -1.0, "avg": -1.0, "max": -1.0}
+            }
+        }
+        status = "FAIL"
+        groups = re.search(self.REGEX_NDRPDR_LAT, msg)
+
+        if groups is not None:
+            keys = ("min", "avg", "max")
+            try:
+                latency["NDR"]["direction1"] = dict(
+                    zip(keys, [float(l) for l in groups.group(1).split('/')]))
+                latency["NDR"]["direction2"] = dict(
+                    zip(keys, [float(l) for l in groups.group(2).split('/')]))
+                latency["PDR"]["direction1"] = dict(
+                    zip(keys, [float(l) for l in groups.group(3).split('/')]))
+                latency["PDR"]["direction2"] = dict(
+                    zip(keys, [float(l) for l in groups.group(4).split('/')]))
+                status = "PASS"
+            except (IndexError, ValueError):
+                pass
+
+        return latency, status
+
     def visit_suite(self, suite):
         """Implements traversing through the suite and its direct children.
 
@@ -489,31 +639,12 @@ class ExecutionChecker(ResultVisitor):
         test_result["doc"] = replace(doc_str, ' |br| [', '[', maxreplace=1)
         test_result["msg"] = test.message.replace('\n', ' |br| '). \
             replace('\r', '').replace('"', "'")
+        test_result["type"] = "FUNC"
         test_result["status"] = test.status
         # Remove TC number from the TC long name (backward compatibility):
         self._test_ID = re.sub(self.REGEX_TC_NUMBER, "", test.longname.lower())
 
-        if test.status == "PASS" and ("NDRPDRDISC" in tags or
-                                      "TCP" in tags or
-                                      "MRR" in tags or
-                                      "BMRR" in tags):
-            if "NDRDISC" in tags:
-                test_type = "NDR"
-            elif "PDRDISC" in tags:
-                test_type = "PDR"
-            elif "TCP" in tags:
-                test_type = "TCP"
-            elif "MRR" in tags:
-                test_type = "MRR"
-            elif "FRMOBL" in tags or "BMRR" in tags:
-                test_type = "BMRR"
-            else:
-                test_result["status"] = "FAIL"
-                self._data["tests"][self._test_ID] = test_result
-                return
-
-            test_result["type"] = test_type
-
+        if "PERFTEST" in tags:
             # Replace info about cores (e.g. -1c-) with the info about threads
             # and cores (e.g. -1t1c-) in the long test case names and in the
             # test case names if necessary.
@@ -542,7 +673,32 @@ class ExecutionChecker(ResultVisitor):
                                   "multi-threading tags.".format(self._test_ID))
                     return
 
-            if test_type in ("NDR", "PDR"):
+        if test.status == "PASS" and ("NDRPDRDISC" in tags or
+                                      "NDRPDR" in tags or
+                                      "TCP" in tags or
+                                      "MRR" in tags or
+                                      "BMRR" in tags):
+            # TODO: Remove when definitely no NDRPDRDISC tests are used:
+            if "NDRDISC" in tags:
+                test_result["type"] = "NDR"
+            # TODO: Remove when definitely no NDRPDRDISC tests are used:
+            elif "PDRDISC" in tags:
+                test_result["type"] = "PDR"
+            elif "NDRPDR" in tags:
+                test_result["type"] = "NDRPDR"
+            elif "TCP" in tags:
+                test_result["type"] = "TCP"
+            elif "MRR" in tags:
+                test_result["type"] = "MRR"
+            elif "FRMOBL" in tags or "BMRR" in tags:
+                test_result["type"] = "BMRR"
+            else:
+                test_result["status"] = "FAIL"
+                self._data["tests"][self._test_ID] = test_result
+                return
+
+            # TODO: Remove when definitely no NDRPDRDISC tests are used:
+            if test_result["type"] in ("NDR", "PDR"):
                 try:
                     rate_value = str(re.search(
                         self.REGEX_RATE, test.message).group(1))
@@ -559,18 +715,22 @@ class ExecutionChecker(ResultVisitor):
                     int(rate_value.split('.')[0])
                 test_result["throughput"]["unit"] = rate_unit
                 test_result["latency"] = \
-                    self._get_latency(test.message, test_type)
-                if test_type == "PDR":
+                    self._get_latency(test.message, test_result["type"])
+                if test_result["type"] == "PDR":
                     test_result["lossTolerance"] = str(re.search(
                         self.REGEX_TOLERANCE, test.message).group(1))
 
-            elif test_type in ("TCP", ):
+            elif test_result["type"] in ("NDRPDR", ):
+                test_result["throughput"], test_result["status"] = \
+                    self._get_ndrpdr_throughput(test.message)
+                test_result["latency"], test_result["status"] = \
+                    self._get_ndrpdr_latency(test.message)
+
+            elif test_result["type"] in ("TCP", ):
                 groups = re.search(self.REGEX_TCP, test.message)
-                test_result["result"] = dict()
-                test_result["result"]["value"] = int(groups.group(2))
-                test_result["result"]["unit"] = groups.group(1)
+                test_result["result"] = int(groups.group(2))
 
-            elif test_type in ("MRR", "BMRR"):
+            elif test_result["type"] in ("MRR", "BMRR"):
                 test_result["result"] = dict()
                 groups = re.search(self.REGEX_BMRR, test.message)
                 if groups is not None:
@@ -1130,6 +1290,8 @@ class InputData(object):
 
         if params is None:
             params = element.get("parameters", None)
+            if params:
+                params.append("type")
 
         data = pd.Series()
         try:

diff --git a/resources/tools/presentation/specification.yaml b/resources/tools/presentation/specification.yaml
index 4bbf1b4..5d64f5c 100644 (file)
--- a/resources/tools/presentation/specification.yaml
+++ b/resources/tools/presentation/specification.yaml
@@ -743,8 +743,8 @@
   format:
     html:
     - full
-#    pdf:
-#    - minimal
+    pdf:
+    - minimal
 
 ################################################################################
 ###                               T A B L E S                                ###
@@ -752,10 +752,9 @@
 
 -
   type: "table"
-  title: "VPP Performance Changes"
+  title: "VPP Performance Changes 1t1c pdr"
   algorithm: "table_performance_comparison"
-  output-file-ext: ".csv"
-  output-file: "{DIR[STATIC,VPP]}/performance-changes"
+  output-file: "{DIR[STATIC,VPP]}/performance-changes-1t1c-pdr"
   history:
     -
       title: "rls1710"
@@ -802,22 +801,192 @@
       - 31  # sel
       - 35  # sel
   data: "vpp-performance-changes"
-  filter: "all"
+  include-tests: "PDR" # "PDR" | "NDR" | "MRR"
+  filter: "'1T1C' and ('NDRPDR' or 'NDRPDRDISC')" # "('NDRPDR' or 'NDRPDRDISC')" | "'MRR'"
   parameters:
   - "name"
   - "parent"
   - "throughput"
-  # Number of the best and the worst tests presented in the table. Use 0 (zero)
-  # to present all tests.
-  nr-of-tests-shown: 20
-  outlier-const: 1.5
 
 -
   type: "table"
-  title: "VPP Performance Changes - MRR"
-  algorithm: "table_performance_comparison_mrr"
-  output-file-ext: ".csv"
-  output-file: "{DIR[STATIC,VPP]}/performance-changes-mrr"
+  title: "VPP Performance Changes 2t2c pdr"
+  algorithm: "table_performance_comparison"
+  output-file: "{DIR[STATIC,VPP]}/performance-changes-2t2c-pdr"
+  history:
+    -
+      title: "rls1710"
+      data:
+        csit-vpp-perf-1710-all:
+        - 11
+        - 12
+        - 13
+        - 14
+        - 15
+        - 16
+        - 17
+        - 18
+        - 19
+        - 20
+  reference:
+    title: "rls1801"
+    data:
+      csit-vpp-perf-1801-all:
+      - 124  # sel
+      - 127  # sel
+      - 128  # sel
+      - 141  # sel
+      - 142  # sel
+      - 143  # sel
+      - 145  # sel
+      - 146  # sel
+      - 162  # sel
+      - 163  # sel
+      - 167  # sel
+      - 172  # sel acl only
+  compare:
+    title: "rls1804"
+    data:
+      csit-vpp-perf-1804-all:
+      - 21  # sel
+      - 22  # sel
+      - 23  # sel
+      - 24  # sel
+      - 27  # sel
+      - 28  # sel
+      - 29  # sel
+      - 30  # sel
+      - 31  # sel
+      - 35  # sel
+  data: "vpp-performance-changes"
+  include-tests: "PDR" # "PDR" | "NDR" | "MRR"
+  filter: "'2T2C' and ('NDRPDR' or 'NDRPDRDISC')" # "('NDRPDR' or 'NDRPDRDISC')" | "'MRR'"
+  parameters:
+  - "name"
+  - "parent"
+  - "throughput"
+
+-
+  type: "table"
+  title: "VPP Performance Changes 1t1c ndr"
+  algorithm: "table_performance_comparison"
+  output-file: "{DIR[STATIC,VPP]}/performance-changes-1t1c-ndr"
+  history:
+    -
+      title: "rls1710"
+      data:
+        csit-vpp-perf-1710-all:
+        - 11
+        - 12
+        - 13
+        - 14
+        - 15
+        - 16
+        - 17
+        - 18
+        - 19
+        - 20
+  reference:
+    title: "rls1801"
+    data:
+      csit-vpp-perf-1801-all:
+      - 124  # sel
+      - 127  # sel
+      - 128  # sel
+      - 141  # sel
+      - 142  # sel
+      - 143  # sel
+      - 145  # sel
+      - 146  # sel
+      - 162  # sel
+      - 163  # sel
+      - 167  # sel
+      - 172  # sel acl only
+  compare:
+    title: "rls1804"
+    data:
+      csit-vpp-perf-1804-all:
+      - 21  # sel
+      - 22  # sel
+      - 23  # sel
+      - 24  # sel
+      - 27  # sel
+      - 28  # sel
+      - 29  # sel
+      - 30  # sel
+      - 31  # sel
+      - 35  # sel
+  data: "vpp-performance-changes"
+  include-tests: "NDR" # "PDR" | "NDR" | "MRR"
+  filter: "'1T1C' and ('NDRPDR' or 'NDRPDRDISC')" # "('NDRPDR' or 'NDRPDRDISC')" | "'MRR'"
+  parameters:
+  - "name"
+  - "parent"
+  - "throughput"
+
+-
+  type: "table"
+  title: "VPP Performance Changes 2t2c ndr"
+  algorithm: "table_performance_comparison"
+  output-file: "{DIR[STATIC,VPP]}/performance-changes-2t2c-ndr"
+  history:
+    -
+      title: "rls1710"
+      data:
+        csit-vpp-perf-1710-all:
+        - 11
+        - 12
+        - 13
+        - 14
+        - 15
+        - 16
+        - 17
+        - 18
+        - 19
+        - 20
+  reference:
+    title: "rls1801"
+    data:
+      csit-vpp-perf-1801-all:
+      - 124  # sel
+      - 127  # sel
+      - 128  # sel
+      - 141  # sel
+      - 142  # sel
+      - 143  # sel
+      - 145  # sel
+      - 146  # sel
+      - 162  # sel
+      - 163  # sel
+      - 167  # sel
+      - 172  # sel acl only
+  compare:
+    title: "rls1804"
+    data:
+      csit-vpp-perf-1804-all:
+      - 21  # sel
+      - 22  # sel
+      - 23  # sel
+      - 24  # sel
+      - 27  # sel
+      - 28  # sel
+      - 29  # sel
+      - 30  # sel
+      - 31  # sel
+      - 35  # sel
+  data: "vpp-performance-changes"
+  include-tests: "NDR" # "PDR" | "NDR" | "MRR"
+  filter: "'2T2C' and ('NDRPDR' or 'NDRPDRDISC')" # "('NDRPDR' or 'NDRPDRDISC')" | "'MRR'"
+  parameters:
+  - "name"
+  - "parent"
+  - "throughput"
+
+-
+  type: "table"
+  title: "VPP Performance Changes - 1t1c MRR"
+  algorithm: "table_performance_comparison"
+  output-file: "{DIR[STATIC,VPP]}/performance-changes-1t1c-mrr"
   reference:
     title: "Release 1801"
     data:
@@ -847,15 +1016,94 @@
       - 21  # mrr - sel
       - 22  # mrr - sel
   data: "vpp-performance-changes-mrr"
-  filter: "all"
+  include-tests: "MRR" # "PDR" | "NDR" | "MRR"
+  filter: "'1T1C' and 'MRR'" # "('NDRPDR' or 'NDRPDRDISC')" | "'MRR'"
+  parameters:
+  - "name"
+  - "parent"
+  - "result"
+
+-
+  type: "table"
+  title: "VPP Performance Changes - 2t2c MRR"
+  algorithm: "table_performance_comparison"
+  output-file: "{DIR[STATIC,VPP]}/performance-changes-2t2c-mrr"
+  reference:
+    title: "Release 1801"
+    data:
+      csit-vpp-perf-check-1801:
+      - 3
+      - 4
+      - 5
+      - 6
+      - 7
+      - 8
+      - 9
+      - 11
+      - 12
+      - 13
+  compare:
+    title: "Release 1804"
+    data:
+      csit-vpp-perf-check-1804:
+      - 6   # mrr - sel
+      - 13  # mrr - sel
+      - 14  # mrr - sel
+      - 15  # mrr - sel
+      - 16  # mrr - sel
+      - 17  # mrr - sel
+      - 19  # mrr - sel
+      - 20  # mrr - sel
+      - 21  # mrr - sel
+      - 22  # mrr - sel
+  data: "vpp-performance-changes-mrr"
+  include-tests: "MRR" # "PDR" | "NDR" | "MRR"
+  filter: "'2T2C' and 'MRR'" # "('NDRPDR' or 'NDRPDRDISC')" | "'MRR'"
+  parameters:
+  - "name"
+  - "parent"
+  - "result"
+
+-
+  type: "table"
+  title: "VPP Performance Changes - 4t4c MRR"
+  algorithm: "table_performance_comparison"
+  output-file: "{DIR[STATIC,VPP]}/performance-changes-4t4c-mrr"
+  reference:
+    title: "Release 1801"
+    data:
+      csit-vpp-perf-check-1801:
+      - 3
+      - 4
+      - 5
+      - 6
+      - 7
+      - 8
+      - 9
+      - 11
+      - 12
+      - 13
+  compare:
+    title: "Release 1804"
+    data:
+      csit-vpp-perf-check-1804:
+      - 6   # mrr - sel
+      - 13  # mrr - sel
+      - 14  # mrr - sel
+      - 15  # mrr - sel
+      - 16  # mrr - sel
+      - 17  # mrr - sel
+      - 19  # mrr - sel
+      - 20  # mrr - sel
+      - 21  # mrr - sel
+      - 22  # mrr - sel
+  data: "vpp-performance-changes-mrr"
+  include-tests: "MRR" # "PDR" | "NDR" | "MRR"
+  filter: "'4T4C' and 'MRR'" # "('NDRPDR' or 'NDRPDRDISC')" | "'MRR'"
   parameters:
   - "name"
   - "parent"
   - "result"
-  # Number of the best and the worst tests presented in the table. Use 0 (zero)
-  # to present all tests.
-  nr-of-tests-shown: 20
-  outlier-const: 1.5
 
 -
   type: "table"
@@ -7996,13 +8244,13 @@
 
 ################################################################################
 
-# Packet Throughput - VPP vhost l2sw 3n-hsw-x520
+# Packet Throughput - VPP vhost ip4 3n-hsw-x520
 -
   type: "plot"
-  title: "VPP Throughput: vhost-l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr"
+  title: "VPP Throughput: vhost-ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and 
@@ -8023,10 +8271,10 @@
 
 -
   type: "plot"
-  title: "VPP Throughput: vhost-l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr"
+  title: "VPP Throughput: vhost-ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and 
@@ -8047,10 +8295,10 @@
 
 -
   type: "plot"
-  title: "VPP Throughput: vhost-l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-pdr"
+  title: "VPP Throughput: vhost-ip4-3n-hsw-x520-64b-1t1c-base_and_scale-pdr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-pdr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x520-64b-1t1c-base_and_scale-pdr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and 
@@ -8071,10 +8319,10 @@
 
 -
   type: "plot"
-  title: "VPP Throughput: vhost-l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-pdr"
+  title: "VPP Throughput: vhost-ip4-3n-hsw-x520-64b-2t2c-base_and_scale-pdr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-pdr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x520-64b-2t2c-base_and_scale-pdr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and 
@@ -8093,13 +8341,13 @@
     title: ""  # No title
     layout: "plot-throughput"
 
-# Packet Throughput - VPP vhost ip4 3n-hsw-x520
+# Packet Throughput - VPP vhost l2sw 3n-hsw-x520
 -
   type: "plot"
-  title: "VPP Throughput: vhost-ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr"
+  title: "VPP Throughput: vhost-l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and 
@@ -8123,10 +8371,10 @@
 
 -
   type: "plot"
-  title: "VPP Throughput: vhost-ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr"
+  title: "VPP Throughput: vhost-l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and 
@@ -8150,10 +8398,10 @@
 
 -
   type: "plot"
-  title: "VPP Throughput: vhost-ip4-3n-hsw-x520-64b-1t1c-base_and_scale-pdr"
+  title: "VPP Throughput: vhost-l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-pdr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x520-64b-1t1c-base_and_scale-pdr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-pdr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and 
@@ -8177,10 +8425,10 @@
 
 -
   type: "plot"
-  title: "VPP Throughput: vhost-ip4-3n-hsw-x520-64b-2t2c-base_and_scale-pdr"
+  title: "VPP Throughput: vhost-l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-pdr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x520-64b-2t2c-base_and_scale-pdr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-pdr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and 
@@ -8202,13 +8450,13 @@
     title: ""  # No title
     layout: "plot-throughput"
 
-# Packet Throughput - VPP vhost l2sw 3n-hsw-x710
+# Packet Throughput - VPP vhost ip4 3n-hsw-x710
 -
   type: "plot"
-  title: "VPP Throughput: vhost-l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr"
+  title: "VPP Throughput: vhost-ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and 
@@ -8229,10 +8477,10 @@
 
 -
   type: "plot"
-  title: "VPP Throughput: vhost-l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr"
+  title: "VPP Throughput: vhost-ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and 
@@ -8253,10 +8501,10 @@
 
 -
   type: "plot"
-  title: "VPP Throughput: vhost-l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-pdr"
+  title: "VPP Throughput: vhost-ip4-3n-hsw-x710-64b-1t1c-base_and_scale-pdr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-pdr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x710-64b-1t1c-base_and_scale-pdr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and 
@@ -8277,10 +8525,10 @@
 
 -
   type: "plot"
-  title: "VPP Throughput: vhost-l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-pdr"
+  title: "VPP Throughput: vhost-ip4-3n-hsw-x710-64b-2t2c-base_and_scale-pdr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-pdr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x710-64b-2t2c-base_and_scale-pdr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and 
@@ -8299,13 +8547,13 @@
     title: ""  # No title
     layout: "plot-throughput"
 
-# Packet Throughput - VPP vhost ip4 3n-hsw-x710
+# Packet Throughput - VPP vhost l2sw 3n-hsw-x710
 -
   type: "plot"
-  title: "VPP Throughput: vhost-ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr"
+  title: "VPP Throughput: vhost-l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and 
@@ -8329,10 +8577,10 @@
 
 -
   type: "plot"
-  title: "VPP Throughput: vhost-ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr"
+  title: "VPP Throughput: vhost-l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and 
@@ -8356,10 +8604,10 @@
 
 -
   type: "plot"
-  title: "VPP Throughput: vhost-ip4-3n-hsw-x710-64b-1t1c-base_and_scale-pdr"
+  title: "VPP Throughput: vhost-l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-pdr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x710-64b-1t1c-base_and_scale-pdr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-pdr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and 
@@ -8383,10 +8631,10 @@
 
 -
   type: "plot"
-  title: "VPP Throughput: vhost-ip4-3n-hsw-x710-64b-2t2c-base_and_scale-pdr"
+  title: "VPP Throughput: vhost-l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-pdr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x710-64b-2t2c-base_and_scale-pdr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-pdr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and 
@@ -8408,13 +8656,13 @@
     title: ""  # No title
     layout: "plot-throughput"
 
-# Packet Throughput - VPP vhost l2sw 3n-hsw-xl710
+# Packet Throughput - VPP vhost ip4 3n-hsw-xl710
 -
   type: "plot"
-  title: "VPP Throughput: vhost-l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr"
+  title: "VPP Throughput: vhost-ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and 
@@ -8435,10 +8683,10 @@
 
 -
   type: "plot"
-  title: "VPP Throughput: vhost-l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr"
+  title: "VPP Throughput: vhost-ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and 
@@ -8459,10 +8707,10 @@
 
 -
   type: "plot"
-  title: "VPP Throughput: vhost-l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-pdr"
+  title: "VPP Throughput: vhost-ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-pdr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-pdr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-pdr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and 
@@ -8483,10 +8731,10 @@
 
 -
   type: "plot"
-  title: "VPP Throughput: vhost-l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-pdr"
+  title: "VPP Throughput: vhost-ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-pdr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-pdr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-pdr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and 
@@ -8505,13 +8753,13 @@
     title: ""  # No title
     layout: "plot-throughput"
 
-# Packet Throughput - VPP vhost ip4 3n-hsw-xl710
+# Packet Throughput - VPP vhost l2sw 3n-hsw-xl710
 -
   type: "plot"
-  title: "VPP Throughput: vhost-ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr"
+  title: "VPP Throughput: vhost-l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and 
@@ -8535,10 +8783,10 @@
 
 -
   type: "plot"
-  title: "VPP Throughput: vhost-ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr"
+  title: "VPP Throughput: vhost-l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and 
@@ -8562,10 +8810,10 @@
 
 -
   type: "plot"
-  title: "VPP Throughput: vhost-ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-pdr"
+  title: "VPP Throughput: vhost-l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-pdr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-pdr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-pdr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and 
@@ -8589,10 +8837,10 @@
 
 -
   type: "plot"
-  title: "VPP Throughput: vhost-ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-pdr"
+  title: "VPP Throughput: vhost-l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-pdr"
   algorithm: "plot_performance_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-pdr"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-pdr"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and 
@@ -10083,10 +10331,10 @@
 # Packet Latency - VPP L2 3n-hsw-x520
 -
   type: "plot"
-  title: "VPP Latency: l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and
@@ -10107,10 +10355,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and
@@ -10131,10 +10379,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: l2sw-3n-hsw-x520-64b-1t1c-features-ndr-lat50"
+  title: "VPP Latency: l2sw-3n-hsw-x520-64b-1t1c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-hsw-x520-64b-1t1c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-hsw-x520-64b-1t1c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and
@@ -10156,10 +10404,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: l2sw-3n-hsw-x520-64b-2t2c-features-ndr-lat50"
+  title: "VPP Latency: l2sw-3n-hsw-x520-64b-2t2c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-hsw-x520-64b-2t2c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-hsw-x520-64b-2t2c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and
@@ -10182,10 +10430,10 @@
 # Packet Latency - VPP L2 3n-hsw-x710
 -
   type: "plot"
-  title: "VPP Latency: l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -10206,10 +10454,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -10230,10 +10478,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: l2sw-3n-hsw-x710-64b-1t1c-features-ndr-lat50"
+  title: "VPP Latency: l2sw-3n-hsw-x710-64b-1t1c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-hsw-x710-64b-1t1c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-hsw-x710-64b-1t1c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -10255,10 +10503,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: l2sw-3n-hsw-x710-64b-2t2c-features-ndr-lat50"
+  title: "VPP Latency: l2sw-3n-hsw-x710-64b-2t2c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-hsw-x710-64b-2t2c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-hsw-x710-64b-2t2c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -10281,10 +10529,10 @@
 # Packet Latency - VPP L2 3n-hsw-xl710
 -
   type: "plot"
-  title: "VPP Latency: l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and
@@ -10305,10 +10553,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and
@@ -10330,10 +10578,10 @@
 # Packet Latency - VPP L2 3n-skx-x710
 -
   type: "plot"
-  title: "VPP Latency: l2sw-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: l2sw-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -10354,10 +10602,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: l2sw-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: l2sw-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -10378,10 +10626,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: l2sw-3n-skx-x710-64b-2t1c-features-ndr-lat50"
+  title: "VPP Latency: l2sw-3n-skx-x710-64b-2t1c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-skx-x710-64b-2t1c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-skx-x710-64b-2t1c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -10403,10 +10651,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: l2sw-3n-skx-x710-64b-4t2c-features-ndr-lat50"
+  title: "VPP Latency: l2sw-3n-skx-x710-64b-4t2c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-skx-x710-64b-4t2c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-skx-x710-64b-4t2c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -10429,10 +10677,10 @@
 # Packet Latency - VPP L2 3n-skx-xxv710
 -
   type: "plot"
-  title: "VPP Latency: l2sw-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: l2sw-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -10453,10 +10701,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: l2sw-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: l2sw-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -10477,10 +10725,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: l2sw-3n-skx-xxv710-64b-2t1c-features-ndr-lat50"
+  title: "VPP Latency: l2sw-3n-skx-xxv710-64b-2t1c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-skx-xxv710-64b-2t1c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-skx-xxv710-64b-2t1c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -10502,10 +10750,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: l2sw-3n-skx-xxv710-64b-4t2c-features-ndr-lat50"
+  title: "VPP Latency: l2sw-3n-skx-xxv710-64b-4t2c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-skx-xxv710-64b-4t2c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-3n-skx-xxv710-64b-4t2c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -10528,10 +10776,10 @@
 # Packet Latency - VPP L2 2n-skx-x710
 -
   type: "plot"
-  title: "VPP Latency: l2sw-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: l2sw-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -10552,10 +10800,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: l2sw-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: l2sw-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -10576,10 +10824,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: l2sw-2n-skx-x710-64b-2t1c-features-ndr-lat50"
+  title: "VPP Latency: l2sw-2n-skx-x710-64b-2t1c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-2n-skx-x710-64b-2t1c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-2n-skx-x710-64b-2t1c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -10601,10 +10849,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: l2sw-2n-skx-x710-64b-4t2c-features-ndr-lat50"
+  title: "VPP Latency: l2sw-2n-skx-x710-64b-4t2c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-2n-skx-x710-64b-4t2c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-2n-skx-x710-64b-4t2c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -10627,10 +10875,10 @@
 # Packet Latency - VPP L2 2n-skx-xxv710
 -
   type: "plot"
-  title: "VPP Latency: l2sw-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: l2sw-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -10651,10 +10899,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: l2sw-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: l2sw-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -10675,10 +10923,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: l2sw-2n-skx-xxv710-64b-2t1c-features-ndr-lat50"
+  title: "VPP Latency: l2sw-2n-skx-xxv710-64b-2t1c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-2n-skx-xxv710-64b-2t1c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-2n-skx-xxv710-64b-2t1c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -10700,10 +10948,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: l2sw-2n-skx-xxv710-64b-4t2c-features-ndr-lat50"
+  title: "VPP Latency: l2sw-2n-skx-xxv710-64b-4t2c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/l2sw-2n-skx-xxv710-64b-4t2c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/l2sw-2n-skx-xxv710-64b-4t2c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -10728,10 +10976,10 @@
 # Packet Latency - VPP Container Memif 3n-hsw-x520
 -
   type: "plot"
-  title: "VPP Latency: memif-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: memif-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/memif-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/memif-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and
@@ -10752,10 +11000,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: memif-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: memif-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/memif-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/memif-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and
@@ -10777,10 +11025,10 @@
 # Packet Latency - VPP Container Memif 3n-hsw-x710
 -
   type: "plot"
-  title: "VPP Latency: memif-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: memif-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/memif-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/memif-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -10801,10 +11049,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: memif-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: memif-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/memif-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/memif-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -10826,10 +11074,10 @@
 # Packet Latency - VPP Container Memif 3n-hsw-xl710
 -
   type: "plot"
-  title: "VPP Latency: memif-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: memif-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/memif-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/memif-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and
@@ -10850,10 +11098,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: memif-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: memif-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/memif-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/memif-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and
@@ -10875,10 +11123,10 @@
 # Packet Latency - VPP Container Memif 3n-skx-x710
 -
   type: "plot"
-  title: "VPP Latency: memif-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: memif-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/memif-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/memif-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -10899,10 +11147,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: memif-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: memif-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/memif-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/memif-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -10924,10 +11172,10 @@
 # Packet Latency - VPP Container Memif 3n-skx-xxv710
 -
   type: "plot"
-  title: "VPP Latency: memif-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: memif-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/memif-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/memif-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -10948,10 +11196,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: memif-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: memif-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/memif-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/memif-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -10973,10 +11221,10 @@
 # Packet Latency - VPP Container Memif 2n-skx-x710
 -
   type: "plot"
-  title: "VPP Latency: memif-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: memif-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/memif-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/memif-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -10997,10 +11245,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: memif-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: memif-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/memif-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/memif-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -11022,10 +11270,10 @@
 # Packet Latency - VPP Container Memif 2n-skx-xxv710
 -
   type: "plot"
-  title: "VPP Latency: memif-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: memif-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/memif-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/memif-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -11046,10 +11294,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: memif-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: memif-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/memif-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/memif-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -11073,10 +11321,10 @@
 # Packet Latency - VPP Container Memif 3n-hsw-x520
 -
   type: "plot"
-  title: "VPP Latency: k8s-memif-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: k8s-memif-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/k8s-memif-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/k8s-memif-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat"
   data: "plot-ligato-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and
@@ -11097,10 +11345,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: k8s-memif-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: k8s-memif-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/k8s-memif-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/k8s-memif-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat"
   data: "plot-ligato-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and
@@ -11122,10 +11370,10 @@
 # Packet Latency - VPP Container Memif 3n-hsw-x710
 -
   type: "plot"
-  title: "VPP Latency: k8s-memif-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: k8s-memif-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/k8s-memif-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/k8s-memif-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat"
   data: "plot-ligato-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -11146,10 +11394,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: k8s-memif-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: k8s-memif-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/k8s-memif-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/k8s-memif-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat"
   data: "plot-ligato-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -11171,10 +11419,10 @@
 # Packet Latency - VPP Container Memif 3n-skx-x710
 -
   type: "plot"
-  title: "VPP Latency: k8s-memif-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: k8s-memif-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/k8s-memif-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/k8s-memif-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat"
   data: "plot-ligato-throughput-latency-3n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -11195,10 +11443,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: k8s-memif-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: k8s-memif-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/k8s-memif-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/k8s-memif-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat"
   data: "plot-ligato-throughput-latency-3n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -11220,10 +11468,10 @@
 # Packet Latency - VPP Container Memif 3n-skx-xxv710
 -
   type: "plot"
-  title: "VPP Latency: k8s-memif-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: k8s-memif-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/k8s-memif-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/k8s-memif-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat"
   data: "plot-ligato-throughput-latency-3n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -11244,10 +11492,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: k8s-memif-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: k8s-memif-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/k8s-memif-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/k8s-memif-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat"
   data: "plot-ligato-throughput-latency-3n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -11269,10 +11517,10 @@
 # Packet Latency - VPP Container Memif 2n-skx-x710
 -
   type: "plot"
-  title: "VPP Latency: k8s-memif-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: k8s-memif-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/k8s-memif-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/k8s-memif-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat"
   data: "plot-ligato-throughput-latency-2n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -11293,10 +11541,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: k8s-memif-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: k8s-memif-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/k8s-memif-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/k8s-memif-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat"
   data: "plot-ligato-throughput-latency-2n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -11318,10 +11566,10 @@
 # Packet Latency - VPP Container Memif 2n-skx-xxv710
 -
   type: "plot"
-  title: "VPP Latency: k8s-memif-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: k8s-memif-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/k8s-memif-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/k8s-memif-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat"
   data: "plot-ligato-throughput-latency-2n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -11342,10 +11590,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: k8s-memif-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: k8s-memif-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/k8s-memif-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/k8s-memif-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat"
   data: "plot-ligato-throughput-latency-2n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -11369,10 +11617,10 @@
 # Packet Latency - VPP IPv4 3n-hsw-x520
 -
   type: "plot"
-  title: "VPP Latency: ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and
@@ -11393,10 +11641,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and
@@ -11417,10 +11665,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4-3n-hsw-x520-64b-1t1c-features-ndr-lat50"
+  title: "VPP Latency: ip4-3n-hsw-x520-64b-1t1c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-3n-hsw-x520-64b-1t1c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-3n-hsw-x520-64b-1t1c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and
@@ -11442,10 +11690,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4-3n-hsw-x520-64b-2t2c-features-ndr-lat50"
+  title: "VPP Latency: ip4-3n-hsw-x520-64b-2t2c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-3n-hsw-x520-64b-2t2c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-3n-hsw-x520-64b-2t2c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and
@@ -11468,10 +11716,10 @@
 # Packet Latency - VPP IPv4 3n-hsw-x710
 -
   type: "plot"
-  title: "VPP Latency: ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -11492,10 +11740,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -11516,10 +11764,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4-3n-hsw-x710-64b-1t1c-features-ndr-lat50"
+  title: "VPP Latency: ip4-3n-hsw-x710-64b-1t1c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-3n-hsw-x710-64b-1t1c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-3n-hsw-x710-64b-1t1c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -11541,10 +11789,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4-3n-hsw-x710-64b-2t2c-features-ndr-lat50"
+  title: "VPP Latency: ip4-3n-hsw-x710-64b-2t2c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-3n-hsw-x710-64b-2t2c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-3n-hsw-x710-64b-2t2c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -11567,10 +11815,10 @@
 # Packet Latency - VPP IPv4 3n-hsw-xl710
 -
   type: "plot"
-  title: "VPP Latency: ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and
@@ -11591,10 +11839,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and
@@ -11616,10 +11864,10 @@
 # Packet Latency - VPP IPv4 3n-skx-x710
 -
   type: "plot"
-  title: "VPP Latency: ip4-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -11640,10 +11888,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -11664,10 +11912,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4-3n-skx-x710-64b-2t1c-features-ndr-lat50"
+  title: "VPP Latency: ip4-3n-skx-x710-64b-2t1c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-3n-skx-x710-64b-2t1c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-3n-skx-x710-64b-2t1c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -11689,10 +11937,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4-3n-skx-x710-64b-4t2c-features-ndr-lat50"
+  title: "VPP Latency: ip4-3n-skx-x710-64b-4t2c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-3n-skx-x710-64b-4t2c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-3n-skx-x710-64b-4t2c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -11715,10 +11963,10 @@
 # Packet Latency - VPP IPv4 3n-skx-xxv710
 -
   type: "plot"
-  title: "VPP Latency: ip4-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -11739,10 +11987,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -11763,10 +12011,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4-3n-skx-xxv710-64b-2t1c-features-ndr-lat50"
+  title: "VPP Latency: ip4-3n-skx-xxv710-64b-2t1c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-3n-skx-xxv710-64b-2t1c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-3n-skx-xxv710-64b-2t1c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -11788,10 +12036,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4-3n-skx-xxv710-64b-4t2c-features-ndr-lat50"
+  title: "VPP Latency: ip4-3n-skx-xxv710-64b-4t2c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-3n-skx-xxv710-64b-4t2c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-3n-skx-xxv710-64b-4t2c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -11814,10 +12062,10 @@
 # Packet Latency - VPP IPv4 2n-skx-x710
 -
   type: "plot"
-  title: "VPP Latency: ip4-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -11838,10 +12086,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -11862,10 +12110,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4-2n-skx-x710-64b-2t1c-features-ndr-lat50"
+  title: "VPP Latency: ip4-2n-skx-x710-64b-2t1c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-2n-skx-x710-64b-2t1c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-2n-skx-x710-64b-2t1c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -11887,10 +12135,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4-2n-skx-x710-64b-4t2c-features-ndr-lat50"
+  title: "VPP Latency: ip4-2n-skx-x710-64b-4t2c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-2n-skx-x710-64b-4t2c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-2n-skx-x710-64b-4t2c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -11913,10 +12161,10 @@
 # Packet Latency - VPP IPv4 2n-skx-xxv710
 -
   type: "plot"
-  title: "VPP Latency: ip4-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -11937,10 +12185,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -11961,10 +12209,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4-2n-skx-xxv710-64b-2t1c-features-ndr-lat50"
+  title: "VPP Latency: ip4-2n-skx-xxv710-64b-2t1c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-2n-skx-xxv710-64b-2t1c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-2n-skx-xxv710-64b-2t1c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -11986,10 +12234,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4-2n-skx-xxv710-64b-4t2c-features-ndr-lat50"
+  title: "VPP Latency: ip4-2n-skx-xxv710-64b-4t2c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4-2n-skx-xxv710-64b-4t2c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-2n-skx-xxv710-64b-4t2c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -12014,10 +12262,10 @@
 # Packet Latency - VPP Ipv4 tunnels 3n-hsw-x520
 -
   type: "plot"
-  title: "VPP Latency: ip4tun-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4tun-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4tun-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4tun-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and
@@ -12038,10 +12286,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4tun-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4tun-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4tun-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4tun-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and
@@ -12063,10 +12311,10 @@
 # Packet Latency - VPP Ipv4 tunnels 3n-hsw-x710
 -
   type: "plot"
-  title: "VPP Latency: ip4tun-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4tun-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4tun-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4tun-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -12087,10 +12335,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4tun-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4tun-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4tun-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4tun-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -12112,10 +12360,10 @@
 # Packet Latency - VPP Ipv4 tunnels 3n-skx-x710
 -
   type: "plot"
-  title: "VPP Latency: ip4tun-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4tun-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4tun-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4tun-3n-skx-x710-64b-2t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -12136,10 +12384,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4tun-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4tun-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4tun-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4tun-3n-skx-x710-64b-4t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -12161,10 +12409,10 @@
 # Packet Latency - VPP Ipv4 tunnels 3n-skx-xxv710
 -
   type: "plot"
-  title: "VPP Latency: ip4tun-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4tun-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4tun-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4tun-3n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -12185,10 +12433,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4tun-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4tun-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4tun-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4tun-3n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -12210,10 +12458,10 @@
 # Packet Latency - VPP Ipv4 tunnels 2n-skx-x710
 -
   type: "plot"
-  title: "VPP Latency: ip4tun-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4tun-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4tun-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4tun-2n-skx-x710-64b-2t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -12234,10 +12482,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4tun-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4tun-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4tun-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4tun-2n-skx-x710-64b-4t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -12260,10 +12508,10 @@
 # Packet Latency - VPP Ipv4 tunnels 2n-skx-xxv710
 -
   type: "plot"
-  title: "VPP Latency: ip4tun-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4tun-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4tun-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4tun-2n-skx-xxv710-64b-2t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -12284,10 +12532,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip4tun-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip4tun-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip4tun-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4tun-2n-skx-xxv710-64b-4t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -12311,10 +12559,10 @@
 # Packet Latency - VPP IPv6 3n-hsw-x520
 -
   type: "plot"
-  title: "VPP Latency: ip6-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip6-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '78B' and
@@ -12336,10 +12584,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip6-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip6-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '78B' and
@@ -12361,10 +12609,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip6-3n-hsw-x520-78b-1t1c-features-ndr-lat50"
+  title: "VPP Latency: ip6-3n-hsw-x520-78b-1t1c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-3n-hsw-x520-78b-1t1c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-3n-hsw-x520-78b-1t1c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '78B' and
@@ -12387,10 +12635,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip6-3n-hsw-x520-78b-2t2c-features-ndr-lat50"
+  title: "VPP Latency: ip6-3n-hsw-x520-78b-2t2c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-3n-hsw-x520-78b-2t2c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-3n-hsw-x520-78b-2t2c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '78B' and
@@ -12414,10 +12662,10 @@
 # Packet Latency - VPP IPv6 3n-hsw-x710
 -
   type: "plot"
-  title: "VPP Latency: ip6-3n-hsw-x710-78b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip6-3n-hsw-x710-78b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-3n-hsw-x710-78b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-3n-hsw-x710-78b-1t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '78B' and
@@ -12439,10 +12687,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip6-3n-hsw-x710-78b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip6-3n-hsw-x710-78b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-3n-hsw-x710-78b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-3n-hsw-x710-78b-2t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '78B' and
@@ -12464,10 +12712,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip6-3n-hsw-x710-78b-1t1c-features-ndr-lat50"
+  title: "VPP Latency: ip6-3n-hsw-x710-78b-1t1c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-3n-hsw-x710-78b-1t1c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-3n-hsw-x710-78b-1t1c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '78B' and
@@ -12490,10 +12738,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip6-3n-hsw-x710-78b-2t2c-features-ndr-lat50"
+  title: "VPP Latency: ip6-3n-hsw-x710-78b-2t2c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-3n-hsw-x710-78b-2t2c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-3n-hsw-x710-78b-2t2c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '78B' and
@@ -12517,10 +12765,10 @@
 # Packet Latency - VPP IPv6 3n-hsw-xl710
 -
   type: "plot"
-  title: "VPP Latency: ip6-3n-hsw-xl710-78b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip6-3n-hsw-xl710-78b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-3n-hsw-xl710-78b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-3n-hsw-xl710-78b-1t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '78B' and
@@ -12542,10 +12790,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip6-3n-hsw-xl710-78b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip6-3n-hsw-xl710-78b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-3n-hsw-xl710-78b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-3n-hsw-xl710-78b-2t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '78B' and
@@ -12568,10 +12816,10 @@
 # Packet Latency - VPP IPv6 3n-skx-x710
 -
   type: "plot"
-  title: "VPP Latency: ip6-3n-skx-x710-78b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip6-3n-skx-x710-78b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-3n-skx-x710-78b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-3n-skx-x710-78b-2t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-X710' and
            '78B' and
@@ -12593,10 +12841,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip6-3n-skx-x710-78b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip6-3n-skx-x710-78b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-3n-skx-x710-78b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-3n-skx-x710-78b-4t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-X710' and
            '78B' and
@@ -12618,10 +12866,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip6-3n-skx-x710-78b-2t1c-features-ndr-lat50"
+  title: "VPP Latency: ip6-3n-skx-x710-78b-2t1c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-3n-skx-x710-78b-2t1c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-3n-skx-x710-78b-2t1c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-X710' and
            '78B' and
@@ -12644,10 +12892,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip6-3n-skx-x710-78b-4t2c-features-ndr-lat50"
+  title: "VPP Latency: ip6-3n-skx-x710-78b-4t2c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-3n-skx-x710-78b-4t2c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-3n-skx-x710-78b-4t2c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-X710' and
            '78B' and
@@ -12671,10 +12919,10 @@
 # Packet Latency - VPP IPv6 3n-skx-xxv710
 -
   type: "plot"
-  title: "VPP Latency: ip6-3n-skx-xxv710-78b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip6-3n-skx-xxv710-78b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-3n-skx-xxv710-78b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-3n-skx-xxv710-78b-2t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-XXV710' and
            '78B' and
@@ -12696,10 +12944,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip6-3n-skx-xxv710-78b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip6-3n-skx-xxv710-78b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-3n-skx-xxv710-78b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-3n-skx-xxv710-78b-4t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-XXV710' and
            '78B' and
@@ -12721,10 +12969,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip6-3n-skx-xxv710-78b-2t1c-features-ndr-lat50"
+  title: "VPP Latency: ip6-3n-skx-xxv710-78b-2t1c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-3n-skx-xxv710-78b-2t1c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-3n-skx-xxv710-78b-2t1c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-XXV710' and
            '78B' and
@@ -12747,10 +12995,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip6-3n-skx-xxv710-78b-4t2c-features-ndr-lat50"
+  title: "VPP Latency: ip6-3n-skx-xxv710-78b-4t2c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-3n-skx-xxv710-78b-4t2c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-3n-skx-xxv710-78b-4t2c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-skx"
   filter: "'NIC_Intel-XXV710' and
            '78B' and
@@ -12774,10 +13022,10 @@
 # Packet Latency - VPP IPv6 2n-skx-x710
 -
   type: "plot"
-  title: "VPP Latency: ip6-2n-skx-x710-78b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip6-2n-skx-x710-78b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-2n-skx-x710-78b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-2n-skx-x710-78b-2t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-X710' and
            '78B' and
@@ -12799,10 +13047,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip6-2n-skx-x710-78b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip6-2n-skx-x710-78b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-2n-skx-x710-78b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-2n-skx-x710-78b-4t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-X710' and
            '78B' and
@@ -12824,10 +13072,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip6-2n-skx-x710-78b-2t1c-features-ndr-lat50"
+  title: "VPP Latency: ip6-2n-skx-x710-78b-2t1c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-2n-skx-x710-78b-2t1c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-2n-skx-x710-78b-2t1c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-X710' and
            '78B' and
@@ -12850,10 +13098,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip6-2n-skx-x710-78b-4t2c-features-ndr-lat50"
+  title: "VPP Latency: ip6-2n-skx-x710-78b-4t2c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-2n-skx-x710-78b-4t2c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-2n-skx-x710-78b-4t2c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-X710' and
            '78B' and
@@ -12877,10 +13125,10 @@
 # Packet Latency - VPP IPv6 2n-skx-xxv710
 -
   type: "plot"
-  title: "VPP Latency: ip6-2n-skx-xxv710-78b-2t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip6-2n-skx-xxv710-78b-2t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-2n-skx-xxv710-78b-2t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-2n-skx-xxv710-78b-2t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-XXV710' and
            '78B' and
@@ -12902,10 +13150,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip6-2n-skx-xxv710-78b-4t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip6-2n-skx-xxv710-78b-4t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-2n-skx-xxv710-78b-4t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-2n-skx-xxv710-78b-4t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-XXV710' and
            '78B' and
@@ -12927,10 +13175,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip6-2n-skx-xxv710-78b-2t1c-features-ndr-lat50"
+  title: "VPP Latency: ip6-2n-skx-xxv710-78b-2t1c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-2n-skx-xxv710-78b-2t1c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-2n-skx-xxv710-78b-2t1c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-XXV710' and
            '78B' and
@@ -12953,10 +13201,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip6-2n-skx-xxv710-78b-4t2c-features-ndr-lat50"
+  title: "VPP Latency: ip6-2n-skx-xxv710-78b-4t2c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6-2n-skx-xxv710-78b-4t2c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6-2n-skx-xxv710-78b-4t2c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-2n-skx"
   filter: "'NIC_Intel-XXV710' and
            '78B' and
@@ -12982,10 +13230,10 @@
 # Packet Latency - VPP IPv6 tunnels 3n-hsw-x520
 -
   type: "plot"
-  title: "VPP Latency: ip6tun-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip6tun-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6tun-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6tun-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '78B' and
@@ -12995,7 +13243,7 @@
            ('VXLAN' or 'VXLANGPE' or 'LISP' or 'LISPGPE' or 'GRE') and
            not 'VHOST'"
   parameters:
-  - "throughput"
+  - "latency"
   - "parent"
   traces:
     boxmean: False
@@ -13005,10 +13253,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ip6tun-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ip6tun-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ip6tun-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip6tun-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '78B' and
@@ -13018,7 +13266,7 @@
            ('VXLAN' or 'VXLANGPE' or 'LISP' or 'LISPGPE' or 'GRE') and
            not 'VHOST'"
   parameters:
-  - "throughput"
+  - "latency"
   - "parent"
   traces:
     boxmean: False
@@ -13031,10 +13279,10 @@
 # Packet Latency - VPP IPSec 3n-hsw-xl710
 -
   type: "plot"
-  title: "VPP Latency: ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and
@@ -13055,10 +13303,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and
@@ -13082,10 +13330,10 @@
 # Packet Latency - VPP SRv6 3n-hsw-x520
 -
   type: "plot"
-  title: "VPP Latency: srv6-3n-hsw-x520-78b-1t1c-features-ndr-lat50"
+  title: "VPP Latency: srv6-3n-hsw-x520-78b-1t1c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/srv6-3n-hsw-x520-78b-1t1c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/srv6-3n-hsw-x520-78b-1t1c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '78B' and 
@@ -13105,10 +13353,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: srv6-3n-hsw-x520-78b-2t2c-features-ndr-lat50"
+  title: "VPP Latency: srv6-3n-hsw-x520-78b-2t2c-features-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/srv6-3n-hsw-x520-78b-2t2c-features-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/srv6-3n-hsw-x520-78b-2t2c-features-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '78B' and 
@@ -13128,13 +13376,13 @@
 
 ################################################################################
 
-# Packet Latency - VPP vhost l2sw 3n-hsw-x520
+# Packet Latency - VPP vhost ip4 3n-hsw-x520
 -
   type: "plot"
-  title: "VPP Latency: vhost-l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: vhost-ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and 
@@ -13153,10 +13401,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: vhost-l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: vhost-ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and 
@@ -13173,13 +13421,13 @@
     title: ""  # No title
     layout: "plot-latency"
 
-# Packet Latency - VPP vhost ip4 3n-hsw-x520
+# Packet Latency - VPP vhost l2sw 3n-hsw-x520
 -
   type: "plot"
-  title: "VPP Latency: vhost-ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: vhost-l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x520-64b-1t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and 
@@ -13201,10 +13449,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: vhost-ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: vhost-l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x520-64b-2t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and 
@@ -13224,13 +13472,13 @@
     title: ""  # No title
     layout: "plot-latency"
 
-# Packet Latency - VPP vhost l2sw 3n-hsw-x710
+# Packet Latency - VPP vhost ip4 3n-hsw-x710
 -
   type: "plot"
-  title: "VPP Latency: vhost-l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: vhost-ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and 
@@ -13249,10 +13497,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: vhost-l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: vhost-ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and 
@@ -13269,13 +13517,13 @@
     title: ""  # No title
     layout: "plot-latency"
 
-# Packet Latency - VPP vhost ip4 3n-hsw-x710
+# Packet Latency - VPP vhost l2sw 3n-hsw-x710
 -
   type: "plot"
-  title: "VPP Latency: vhost-ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: vhost-l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x710-64b-1t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and 
@@ -13297,10 +13545,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: vhost-ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: vhost-l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x710-64b-2t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and 
@@ -13320,13 +13568,13 @@
     title: ""  # No title
     layout: "plot-latency"
 
-# Packet Latency - VPP vhost l2sw 3n-hsw-xl710
+# Packet Latency - VPP vhost ip4 3n-hsw-xl710
 -
   type: "plot"
-  title: "VPP Latency: vhost-l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: vhost-ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and 
@@ -13345,10 +13593,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: vhost-l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: vhost-ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/ip4-l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and 
@@ -13365,13 +13613,13 @@
     title: ""  # No title
     layout: "plot-latency"
 
-# Packet Latency - VPP vhost ip4 3n-hsw-xl710
+# Packet Latency - VPP vhost l2sw 3n-hsw-xl710
 -
   type: "plot"
-  title: "VPP Latency: vhost-ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: vhost-l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and 
@@ -13393,10 +13641,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: vhost-ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50"
+  title: "VPP Latency: vhost-l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and 
@@ -13417,13 +13665,14 @@
     layout: "plot-latency"
 
 ################################################################################
+
 # Packet Latency - VPP VTS 3n-hsw-x520
 -
   type: "plot"
-  title: "VPP Latency: vts-3n-hsw-x520-64b-1t1c-ndr-lat50"
+  title: "VPP Latency: vts-3n-hsw-x520-64b-1t1c-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vts-3n-hsw-x520-64b-1t1c-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/vts-3n-hsw-x520-64b-1t1c-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and
@@ -13441,10 +13690,10 @@
 
 -
   type: "plot"
-  title: "VPP Latency: vts-3n-hsw-x520-64b-2t2c-ndr-lat50"
+  title: "VPP Latency: vts-3n-hsw-x520-64b-2t2c-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vts-3n-hsw-x520-64b-2t2c-ndr-lat50"
+  output-file: "{DIR[STATIC,VPP]}/vts-3n-hsw-x520-64b-2t2c-ndr-lat"
   data: "plot-vpp-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and
@@ -13465,10 +13714,10 @@
 # Packet Latency - DPDK l3fwd 3n-hsw-x520
 -
   type: "plot"
-  title: "DPDK Latency: l3fwd-3n-hsw-x520-64b-1t1c-base-ndr-lat50"
+  title: "DPDK Latency: l3fwd-3n-hsw-x520-64b-1t1c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/l3fwd-3n-hsw-x520-64b-1t1c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/l3fwd-3n-hsw-x520-64b-1t1c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and
@@ -13489,10 +13738,10 @@
 
 -
   type: "plot"
-  title: "DPDK Latency: l3fwd-3n-hsw-x520-64b-2t2c-base-ndr-lat50"
+  title: "DPDK Latency: l3fwd-3n-hsw-x520-64b-2t2c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/l3fwd-3n-hsw-x520-64b-2t2c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/l3fwd-3n-hsw-x520-64b-2t2c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and
@@ -13514,10 +13763,10 @@
 # Packet Latency - DPDK l3fwd 3n-hsw-x710
 -
   type: "plot"
-  title: "DPDK Latency: l3fwd-3n-hsw-x710-64b-1t1c-base-ndr-lat50"
+  title: "DPDK Latency: l3fwd-3n-hsw-x710-64b-1t1c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/l3fwd-3n-hsw-x710-64b-1t1c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/l3fwd-3n-hsw-x710-64b-1t1c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -13538,10 +13787,10 @@
 
 -
   type: "plot"
-  title: "DPDK Latency: l3fwd-3n-hsw-x710-64b-2t2c-base-ndr-lat50"
+  title: "DPDK Latency: l3fwd-3n-hsw-x710-64b-2t2c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/l3fwd-3n-hsw-x710-64b-2t2c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/l3fwd-3n-hsw-x710-64b-2t2c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -13563,10 +13812,10 @@
 # Packet Latency - DPDK l3fwd 3n-hsw-xl710
 -
   type: "plot"
-  title: "DPDK Latency: l3fwd-3n-hsw-xl710-64b-1t1c-base-ndr-lat50"
+  title: "DPDK Latency: l3fwd-3n-hsw-xl710-64b-1t1c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/l3fwd-3n-hsw-xl710-64b-1t1c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/l3fwd-3n-hsw-xl710-64b-1t1c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and
@@ -13587,10 +13836,10 @@
 
 -
   type: "plot"
-  title: "DPDK Latency: l3fwd-3n-hsw-xl710-64b-2t2c-base-ndr-lat50"
+  title: "DPDK Latency: l3fwd-3n-hsw-xl710-64b-2t2c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/l3fwd-3n-hsw-xl710-64b-2t2c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/l3fwd-3n-hsw-xl710-64b-2t2c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and
@@ -13612,10 +13861,10 @@
 # Packet Latency - DPDK l3fwd 3n-skx-x710
 -
   type: "plot"
-  title: "DPDK Latency: l3fwd-3n-skx-x710-64b-2t1c-base-ndr-lat50"
+  title: "DPDK Latency: l3fwd-3n-skx-x710-64b-2t1c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/l3fwd-3n-skx-x710-64b-2t1c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/l3fwd-3n-skx-x710-64b-2t1c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-3n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -13636,10 +13885,10 @@
 
 -
   type: "plot"
-  title: "DPDK Latency: l3fwd-3n-skx-x710-64b-4t2c-base-ndr-lat50"
+  title: "DPDK Latency: l3fwd-3n-skx-x710-64b-4t2c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/l3fwd-3n-skx-x710-64b-4t2c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/l3fwd-3n-skx-x710-64b-4t2c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-3n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -13661,10 +13910,10 @@
 # Packet Latency - DPDK l3fwd 3n-skx-xxv710
 -
   type: "plot"
-  title: "DPDK Latency: l3fwd-3n-skx-xxv710-64b-2t1c-base-ndr-lat50"
+  title: "DPDK Latency: l3fwd-3n-skx-xxv710-64b-2t1c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/l3fwd-3n-skx-xxv710-64b-2t1c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/l3fwd-3n-skx-xxv710-64b-2t1c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-3n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -13685,10 +13934,10 @@
 
 -
   type: "plot"
-  title: "DPDK Latency: l3fwd-3n-skx-xxv710-64b-4t2c-base-ndr-lat50"
+  title: "DPDK Latency: l3fwd-3n-skx-xxv710-64b-4t2c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/l3fwd-3n-skx-xxv710-64b-4t2c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/l3fwd-3n-skx-xxv710-64b-4t2c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-3n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -13710,10 +13959,10 @@
 # Packet Latency - DPDK l3fwd 2n-skx-x710
 -
   type: "plot"
-  title: "DPDK Latency: l3fwd-2n-skx-x710-64b-2t1c-base-ndr-lat50"
+  title: "DPDK Latency: l3fwd-2n-skx-x710-64b-2t1c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/l3fwd-2n-skx-x710-64b-2t1c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/l3fwd-2n-skx-x710-64b-2t1c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-2n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -13734,10 +13983,10 @@
 
 -
   type: "plot"
-  title: "DPDK Latency: l3fwd-2n-skx-x710-64b-4t2c-base-ndr-lat50"
+  title: "DPDK Latency: l3fwd-2n-skx-x710-64b-4t2c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/l3fwd-2n-skx-x710-64b-4t2c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/l3fwd-2n-skx-x710-64b-4t2c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-2n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -13759,10 +14008,10 @@
 # Packet Latency - DPDK l3fwd 2n-skx-xxv710
 -
   type: "plot"
-  title: "DPDK Latency: l3fwd-2n-skx-xxv710-64b-2t1c-base-ndr-lat50"
+  title: "DPDK Latency: l3fwd-2n-skx-xxv710-64b-2t1c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/l3fwd-2n-skx-xxv710-64b-2t1c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/l3fwd-2n-skx-xxv710-64b-2t1c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-2n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -13783,10 +14032,10 @@
 
 -
   type: "plot"
-  title: "DPDK Latency: l3fwd-2n-skx-xxv710-64b-4t2c-base-ndr-lat50"
+  title: "DPDK Latency: l3fwd-2n-skx-xxv710-64b-4t2c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/l3fwd-2n-skx-xxv710-64b-4t2c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/l3fwd-2n-skx-xxv710-64b-4t2c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-2n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -13810,10 +14059,10 @@
 # Packet Latency - DPDK testpmd 3n-hsw-x520
 -
   type: "plot"
-  title: "DPDK Latency: testpmd-3n-hsw-x520-64b-1t1c-base-ndr-lat50"
+  title: "DPDK Latency: testpmd-3n-hsw-x520-64b-1t1c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/testpmd-3n-hsw-x520-64b-1t1c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/testpmd-3n-hsw-x520-64b-1t1c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and
@@ -13834,10 +14083,10 @@
 
 -
   type: "plot"
-  title: "DPDK Latency: testpmd-3n-hsw-x520-64b-2t2c-base-ndr-lat50"
+  title: "DPDK Latency: testpmd-3n-hsw-x520-64b-2t2c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/testpmd-3n-hsw-x520-64b-2t2c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/testpmd-3n-hsw-x520-64b-2t2c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and
@@ -13859,10 +14108,10 @@
 # Packet Latency - DPDK testpmd 3n-hsw-x710
 -
   type: "plot"
-  title: "DPDK Latency: testpmd-3n-hsw-x710-64b-1t1c-base-ndr-lat50"
+  title: "DPDK Latency: testpmd-3n-hsw-x710-64b-1t1c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/testpmd-3n-hsw-x710-64b-1t1c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/testpmd-3n-hsw-x710-64b-1t1c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -13883,10 +14132,10 @@
 
 -
   type: "plot"
-  title: "DPDK Latency: testpmd-3n-hsw-x710-64b-2t2c-base-ndr-lat50"
+  title: "DPDK Latency: testpmd-3n-hsw-x710-64b-2t2c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/testpmd-3n-hsw-x710-64b-2t2c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/testpmd-3n-hsw-x710-64b-2t2c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -13908,10 +14157,10 @@
 # Packet Latency - DPDK testpmd 3n-hsw-xl710
 -
   type: "plot"
-  title: "DPDK Latency: testpmd-3n-hsw-xl710-64b-1t1c-base-ndr-lat50"
+  title: "DPDK Latency: testpmd-3n-hsw-xl710-64b-1t1c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/testpmd-3n-hsw-xl710-64b-1t1c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/testpmd-3n-hsw-xl710-64b-1t1c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and
@@ -13932,10 +14181,10 @@
 
 -
   type: "plot"
-  title: "DPDK Latency: testpmd-3n-hsw-xl710-64b-2t2c-base-ndr-lat50"
+  title: "DPDK Latency: testpmd-3n-hsw-xl710-64b-2t2c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/testpmd-3n-hsw-xl710-64b-2t2c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/testpmd-3n-hsw-xl710-64b-2t2c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and
@@ -13957,10 +14206,10 @@
 # Packet Latency - DPDK testpmd 3n-skx-x710
 -
   type: "plot"
-  title: "DPDK Latency: testpmd-3n-skx-x710-64b-2t1c-base-ndr-lat50"
+  title: "DPDK Latency: testpmd-3n-skx-x710-64b-2t1c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/testpmd-3n-skx-x710-64b-2t1c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/testpmd-3n-skx-x710-64b-2t1c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-3n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -13981,10 +14230,10 @@
 
 -
   type: "plot"
-  title: "DPDK Latency: testpmd-3n-skx-x710-64b-4t2c-base-ndr-lat50"
+  title: "DPDK Latency: testpmd-3n-skx-x710-64b-4t2c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/testpmd-3n-skx-x710-64b-4t2c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/testpmd-3n-skx-x710-64b-4t2c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-3n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -14006,10 +14255,10 @@
 # Packet Latency - DPDK testpmd 3n-skx-xxv710
 -
   type: "plot"
-  title: "DPDK Latency: testpmd-3n-skx-xxv710-64b-2t1c-base-ndr-lat50"
+  title: "DPDK Latency: testpmd-3n-skx-xxv710-64b-2t1c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/testpmd-3n-skx-xxv710-64b-2t1c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/testpmd-3n-skx-xxv710-64b-2t1c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-3n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -14030,10 +14279,10 @@
 
 -
   type: "plot"
-  title: "DPDK Latency: testpmd-3n-skx-xxv710-64b-4t2c-base-ndr-lat50"
+  title: "DPDK Latency: testpmd-3n-skx-xxv710-64b-4t2c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/testpmd-3n-skx-xxv710-64b-4t2c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/testpmd-3n-skx-xxv710-64b-4t2c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-3n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -14055,10 +14304,10 @@
 # Packet Latency - DPDK testpmd 2n-skx-x710
 -
   type: "plot"
-  title: "DPDK Latency: testpmd-2n-skx-x710-64b-2t1c-base-ndr-lat50"
+  title: "DPDK Latency: testpmd-2n-skx-x710-64b-2t1c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/testpmd-2n-skx-x710-64b-2t1c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/testpmd-2n-skx-x710-64b-2t1c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-2n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -14079,10 +14328,10 @@
 
 -
   type: "plot"
-  title: "DPDK Latency: testpmd-2n-skx-x710-64b-4t2c-base-ndr-lat50"
+  title: "DPDK Latency: testpmd-2n-skx-x710-64b-4t2c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/testpmd-2n-skx-x710-64b-4t2c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/testpmd-2n-skx-x710-64b-4t2c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-2n-skx"
   filter: "'NIC_Intel-X710' and
            '64B' and
@@ -14104,10 +14353,10 @@
 # Packet Latency - DPDK testpmd 2n-skx-xxv710
 -
   type: "plot"
-  title: "DPDK Latency: testpmd-2n-skx-xxv710-64b-2t1c-base-ndr-lat50"
+  title: "DPDK Latency: testpmd-2n-skx-xxv710-64b-2t1c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/testpmd-2n-skx-xxv710-64b-2t1c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/testpmd-2n-skx-xxv710-64b-2t1c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-2n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -14128,10 +14377,10 @@
 
 -
   type: "plot"
-  title: "DPDK Latency: testpmd-2n-skx-xxv710-64b-4t2c-base-ndr-lat50"
+  title: "DPDK Latency: testpmd-2n-skx-xxv710-64b-4t2c-base-ndr-lat"
   algorithm: "plot_latency_box"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,DPDK]}/testpmd-2n-skx-xxv710-64b-4t2c-base-ndr-lat50"
+  output-file: "{DIR[STATIC,DPDK]}/testpmd-2n-skx-xxv710-64b-4t2c-base-ndr-lat"
   data: "plot-dpdk-throughput-latency-2n-skx"
   filter: "'NIC_Intel-XXV710' and
            '64B' and
@@ -17058,13 +17307,13 @@
 
 ################################################################################
 
-# Speedup - VPP vhost l2sw 3n-hsw-x520
+# Speedup - VPP vhost ip4 3n-hsw-x520
 -
   type: "plot"
-  title: "VPP Speedup: vhost-l2sw-3n-hsw-x520-64b-base_and_scale-ndr-tsa"
+  title: "VPP Speedup: vhost-ip4-3n-hsw-x520-64b-base_and_scale-ndr-tsa"
   algorithm: "plot_throughput_speedup_analysis"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x520-64b-base_and_scale-ndr-tsa"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x520-64b-base_and_scale-ndr-tsa"
   data: "plot-throughput-speedup-analysis-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and 
@@ -17081,10 +17330,10 @@
 
 -
   type: "plot"
-  title: "VPP Speedup: vhost-l2sw-3n-hsw-x520-64b-base_and_scale-pdr-tsa"
+  title: "VPP Speedup: vhost-ip4-3n-hsw-x520-64b-base_and_scale-pdr-tsa"
   algorithm: "plot_throughput_speedup_analysis"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x520-64b-base_and_scale-pdr-tsa"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x520-64b-base_and_scale-pdr-tsa"
   data: "plot-throughput-speedup-analysis-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and 
@@ -17099,13 +17348,13 @@
     title: ""  # No title
     layout: "plot-throughput-speedup-analysis"
 
-# Speedup - VPP vhost ip4 3n-hsw-x520
+# Speedup - VPP vhost l2sw 3n-hsw-x520
 -
   type: "plot"
-  title: "VPP Speedup: vhost-ip4-3n-hsw-x520-64b-base_and_scale-ndr-tsa"
+  title: "VPP Speedup: vhost-l2sw-3n-hsw-x520-64b-base_and_scale-ndr-tsa"
   algorithm: "plot_throughput_speedup_analysis"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x520-64b-base_and_scale-ndr-tsa"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x520-64b-base_and_scale-ndr-tsa"
   data: "plot-throughput-speedup-analysis-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and 
@@ -17125,10 +17374,10 @@
 
 -
   type: "plot"
-  title: "VPP Speedup: vhost-ip4-3n-hsw-x520-64b-base_and_scale-pdr-tsa"
+  title: "VPP Speedup: vhost-l2sw-3n-hsw-x520-64b-base_and_scale-pdr-tsa"
   algorithm: "plot_throughput_speedup_analysis"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x520-64b-base_and_scale-pdr-tsa"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x520-64b-base_and_scale-pdr-tsa"
   data: "plot-throughput-speedup-analysis-3n-hsw"
   filter: "'NIC_Intel-X520-DA2' and
            '64B' and 
@@ -17146,13 +17395,13 @@
     title: ""  # No title
     layout: "plot-throughput-speedup-analysis"
 
-# Speedup - VPP vhost l2sw 3n-hsw-x710
+# Speedup - VPP vhost ip4 3n-hsw-x710
 -
   type: "plot"
-  title: "VPP Speedup: vhost-l2sw-3n-hsw-x710-64b-base_and_scale-ndr-tsa"
+  title: "VPP Speedup: vhost-ip4-3n-hsw-x710-64b-base_and_scale-ndr-tsa"
   algorithm: "plot_throughput_speedup_analysis"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x710-64b-base_and_scale-ndr-tsa"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x710-64b-base_and_scale-ndr-tsa"
   data: "plot-throughput-speedup-analysis-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and 
@@ -17169,10 +17418,10 @@
 
 -
   type: "plot"
-  title: "VPP Speedup: vhost-l2sw-3n-hsw-x710-64b-base_and_scale-pdr-tsa"
+  title: "VPP Speedup: vhost-ip4-3n-hsw-x710-64b-base_and_scale-pdr-tsa"
   algorithm: "plot_throughput_speedup_analysis"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x710-64b-base_and_scale-pdr-tsa"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x710-64b-base_and_scale-pdr-tsa"
   data: "plot-throughput-speedup-analysis-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and 
@@ -17187,13 +17436,13 @@
     title: ""  # No title
     layout: "plot-throughput-speedup-analysis"
 
-# Speedup - VPP vhost ip4 3n-hsw-x710
+# Speedup - VPP vhost l2sw 3n-hsw-x710
 -
   type: "plot"
-  title: "VPP Speedup: vhost-ip4-3n-hsw-x710-64b-base_and_scale-ndr-tsa"
+  title: "VPP Speedup: vhost-l2sw-3n-hsw-x710-64b-base_and_scale-ndr-tsa"
   algorithm: "plot_throughput_speedup_analysis"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x710-64b-base_and_scale-ndr-tsa"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x710-64b-base_and_scale-ndr-tsa"
   data: "plot-throughput-speedup-analysis-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and 
@@ -17213,10 +17462,10 @@
 
 -
   type: "plot"
-  title: "VPP Speedup: vhost-ip4-3n-hsw-x710-64b-base_and_scale-pdr-tsa"
+  title: "VPP Speedup: vhost-l2sw-3n-hsw-x710-64b-base_and_scale-pdr-tsa"
   algorithm: "plot_throughput_speedup_analysis"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-x710-64b-base_and_scale-pdr-tsa"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-x710-64b-base_and_scale-pdr-tsa"
   data: "plot-throughput-speedup-analysis-3n-hsw"
   filter: "'NIC_Intel-X710' and
            '64B' and 
@@ -17234,13 +17483,13 @@
     title: ""  # No title
     layout: "plot-throughput-speedup-analysis"
 
-# Speedup - VPP vhost l2sw 3n-hsw-xl710
+# Speedup - VPP vhost ip4 3n-hsw-xl710
 -
   type: "plot"
-  title: "VPP Speedup: vhost-l2sw-3n-hsw-xl710-64b-base_and_scale-ndr-tsa"
+  title: "VPP Speedup: vhost-ip4-3n-hsw-xl710-64b-base_and_scale-ndr-tsa"
   algorithm: "plot_throughput_speedup_analysis"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-xl710-64b-base_and_scale-ndr-tsa"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-xl710-64b-base_and_scale-ndr-tsa"
   data: "plot-throughput-speedup-analysis-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and 
@@ -17257,10 +17506,10 @@
 
 -
   type: "plot"
-  title: "VPP Speedup: vhost-l2sw-3n-hsw-xl710-64b-base_and_scale-pdr-tsa"
+  title: "VPP Speedup: vhost-ip4-3n-hsw-xl710-64b-base_and_scale-pdr-tsa"
   algorithm: "plot_throughput_speedup_analysis"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-xl710-64b-base_and_scale-pdr-tsa"
+  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-xl710-64b-base_and_scale-pdr-tsa"
   data: "plot-throughput-speedup-analysis-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and 
@@ -17275,13 +17524,13 @@
     title: ""  # No title
     layout: "plot-throughput-speedup-analysis"
 
-# Speedup - VPP vhost ip4 3n-hsw-xl710
+# Speedup - VPP vhost l2sw 3n-hsw-xl710
 -
   type: "plot"
-  title: "VPP Speedup: vhost-ip4-3n-hsw-xl710-64b-base_and_scale-ndr-tsa"
+  title: "VPP Speedup: vhost-l2sw-3n-hsw-xl710-64b-base_and_scale-ndr-tsa"
   algorithm: "plot_throughput_speedup_analysis"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-xl710-64b-base_and_scale-ndr-tsa"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-xl710-64b-base_and_scale-ndr-tsa"
   data: "plot-throughput-speedup-analysis-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and 
@@ -17301,10 +17550,10 @@
 
 -
   type: "plot"
-  title: "VPP Speedup: vhost-ip4-3n-hsw-xl710-64b-base_and_scale-pdr-tsa"
+  title: "VPP Speedup: vhost-l2sw-3n-hsw-xl710-64b-base_and_scale-pdr-tsa"
   algorithm: "plot_throughput_speedup_analysis"
   output-file-type: ".html"
-  output-file: "{DIR[STATIC,VPP]}/vhost-ip4-3n-hsw-xl710-64b-base_and_scale-pdr-tsa"
+  output-file: "{DIR[STATIC,VPP]}/vhost-l2sw-3n-hsw-xl710-64b-base_and_scale-pdr-tsa"
   data: "plot-throughput-speedup-analysis-3n-hsw"
   filter: "'NIC_Intel-XL710' and
            '64B' and 

diff --git a/resources/tools/presentation/specification_CPTA.yaml b/resources/tools/presentation/specification_CPTA.yaml
index d7a3c18..b827e21 100644 (file)
--- a/resources/tools/presentation/specification_CPTA.yaml
+++ b/resources/tools/presentation/specification_CPTA.yaml
@@ -172,13 +172,10 @@
 -
   type: "output"
   output:
-#   "report"
     "CPTA"  # Continuous Performance Trending and Analysis
   format:
     html:
     - full
-    pdf:
-    - minimal
 
 ################################################################################
 ###                               T A B L E S                                ###
@@ -191,7 +188,7 @@
   output-file-ext: ".csv"
   output-file: "{DIR[STATIC,VPP]}/performance-trending-dashboard-1t1c"
   data: "plot-performance-trending-all"
-  filter: "'MRR' and '1T1C'"
+  filter: "'MRR' and '1T1C' and not 'NIC_Intel-XXV710'"
   parameters:
   - "name"
   - "parent"
@@ -212,7 +209,7 @@
   output-file-ext: ".csv"
   output-file: "{DIR[STATIC,VPP]}/performance-trending-dashboard-2t2c"
   data: "plot-performance-trending-all"
-  filter: "'MRR' and '2T2C'"
+  filter: "'MRR' and '2T2C' and not 'NIC_Intel-XXV710'"
   parameters:
   - "name"
   - "parent"
@@ -233,7 +230,7 @@
   output-file-ext: ".csv"
   output-file: "{DIR[STATIC,VPP]}/performance-trending-dashboard-4t4c"
   data: "plot-performance-trending-all"
-  filter: "'MRR' and '4T4C'"
+  filter: "'MRR' and '4T4C' and not 'NIC_Intel-XXV710'"
   parameters:
   - "name"
   - "parent"
@@ -275,7 +272,7 @@
   output-file-ext: ".csv"
   output-file: "{DIR[STATIC,VPP]}/failed-tests"
   data: "plot-performance-trending-all"
-  filter: "'MRR'"
+  filter: "'MRR' and not 'NIC_Intel-XXV710'"
   parameters:
   - "name"
   - "parent"