-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| | Given Start L2FWD '1' worker threads and rxqueues '1' with jumbo frames 'no'
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-xconnect | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-eth-l2xcbase-testpmd-ndrdisc
| | [Documentation]
| | Given Start L2FWD '1' worker threads and rxqueues '1' with jumbo frames 'no'
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-xconnect | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-eth-l2xcbase-testpmd-ndrdisc
| | [Documentation]
| | Given Start L2FWD '1' worker threads and rxqueues '1' with jumbo frames 'yes'
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-xconnect | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-eth-l2xcbase-testpmd-ndrdisc
| | [Documentation]
| | Given Start L2FWD '2' worker threads and rxqueues '1' with jumbo frames 'no'
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-xconnect | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-eth-l2xcbase-testpmd-ndrdisc
| | [Documentation]
| | Given Start L2FWD '2' worker threads and rxqueues '1' with jumbo frames 'no'
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-xconnect | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-eth-l2xcbase-testpmd-ndrdisc
| | [Documentation]
| | Given Start L2FWD '2' worker threads and rxqueues '1' with jumbo frames 'yes'
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-xconnect | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-eth-l2xcbase-testpmd-ndrdisc
| | [Documentation]
| | Given Start L2FWD '4' worker threads and rxqueues '2' with jumbo frames 'no'
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-xconnect | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-eth-l2xcbase-testpmd-ndrdisc
| | [Documentation]
| | Given Start L2FWD '4' worker threads and rxqueues '2' with jumbo frames 'no'
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-xconnect | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-eth-l2xcbase-testpmd-ndrdisc
| | [Documentation]
| | Given Start L2FWD '4' worker threads and rxqueues '2' with jumbo frames 'yes'
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-xconnect | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
if time() - start > timeout:
raise RuntimeError('timeout, VM {0} not booted on {1}'.format(
self._qemu_opt['disk_image'], self._node['host']))
+ out = None
try:
self._qemu_qga_flush()
out = self._qemu_qga_exec('guest-ping')
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| | ...
| | ... | *Example:*
| | ...
-| | ... | \| Calculate pps \| 10000000000 | 64
+| | ... | \| Calculate pps \| 10000000000 \| 64 \|
+| | ...
| | [Arguments] | ${bps} | ${framesize}
+| | ...
| | ${framesize}= | Get Frame Size | ${framesize}
| | ${ret}= | Evaluate | (${bps}/((${framesize}+20)*8)).__trunc__()
| | Return From Keyword | ${ret}
| | ...
| | ... | *Example:*
| | ...
-| | ... | \| Get Frame Size \| IMIX_v4_1
+| | ... | \| Get Frame Size \| IMIX_v4_1 \|
+| | ...
| | [Arguments] | ${framesize}
+| | ...
| | Run Keyword If | '${framesize}' == 'IMIX_v4_1'
| | ... | Return From Keyword | 353.83333
| | Return From Keyword | ${framesize}
-| Setup performance global Variables
-| | [Documentation]
-| | ... | Setup suite Variables. Variables are used across performance testing.
-| | ...
-| | ... | _NOTE:_ This KW sets following suite variables:
-| | ... | - glob_loss_acceptance - Loss acceptance treshold
-| | ... | - glob_loss_acceptance_type - Loss acceptance treshold type
-| | ... | - glob_vm_image - Guest VM disk image
-| | ...
-| | Set Suite Variable | ${glob_loss_acceptance} | 0.5
-| | Set Suite Variable | ${glob_loss_acceptance_type} | percentage
-| | Set Suite Variable | ${glob_vm_image} | /var/lib/vm/csit-nested-1.6.img
-
| 2-node circular Topology Variables Setup
| | [Documentation]
| | ... | Compute path for testing on two given nodes in circular
| | ...
| | ... | \| 2-node circular Topology Variables Setup with DUT interface model \
| | ... | \| Intel-X520-DA2 \|
+| | ...
| | [Arguments] | ${iface_model}
+| | ...
| | ${iface_model_list}= | Create list | ${iface_model}
| | Append Node | ${nodes['TG']}
| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list}
| | ...
| | ... | \| 3-node circular Topology Variables Setup with DUT interface model \
| | ... | \| Intel-X520-DA2 \|
+| | ...
| | [Arguments] | ${iface_model}
+| | ...
| | ${iface_model_list}= | Create list | ${iface_model}
| | Append Node | ${nodes['TG']}
| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list}
| | ...
| | ... | \| Scale IPv4 forwarding initialized in a 3-node circular topology \
| | ... | \| 100000 \|
+| | ...
| | [Arguments] | ${count}
+| | ...
| | Set Interface State | ${dut1} | ${dut1_if1} | up
| | Set Interface State | ${dut1} | ${dut1_if2} | up
| | Set Interface State | ${dut2} | ${dut2_if1} | up
| | ...
| | ... | \| IPv4 forwarding with vhost initialized in a 3-node circular \
| | ... | topology \| /tmp/sock1 \| /tmp/sock2 \|
+| | ...
| | [Arguments] | ${sock1} | ${sock2}
+| | ...
| | VPP interfaces in path are up in a 3-node circular topology
| | VPP Vhost interfaces for L2BD forwarding are setup | ${dut1}
| | ... | ${sock1} | ${sock2}
| | Set Test Variable | ${dut2_vif1_mac}
| | Set Test Variable | ${dut2_vif2_mac}
| | Add arp on dut | ${dut1} | ${dut1_if1} | 1.1.1.1 | ${tg1_if1_mac}
-| | ... | vrf=${fib_table_1}
| | Add arp on dut | ${dut1} | ${dut1_if2} | 2.2.2.2 | ${dut2_if1_mac}
-| | ... | vrf=${fib_table_2}
| | Add arp on dut | ${dut1} | ${dut1_vif1} | 4.4.4.2 | 52:54:00:00:04:01
-| | ... | vrf=${fib_table_1}
| | Add arp on dut | ${dut1} | ${dut1_vif2} | 5.5.5.2 | 52:54:00:00:04:02
-| | ... | vrf=${fib_table_2}
| | Add arp on dut | ${dut2} | ${dut2_if1} | 2.2.2.1 | ${dut1_if2_mac}
-| | ... | vrf=${fib_table_1}
| | Add arp on dut | ${dut2} | ${dut2_if2} | 3.3.3.2 | ${tg1_if2_mac}
-| | ... | vrf=${fib_table_2}
| | Add arp on dut | ${dut2} | ${dut2_vif1} | 4.4.4.2 | 52:54:00:00:04:01
-| | ... | vrf=${fib_table_1}
| | Add arp on dut | ${dut2} | ${dut2_vif2} | 5.5.5.2 | 52:54:00:00:04:02
-| | ... | vrf=${fib_table_2}
| | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 4.4.4.2 | ${dut1_vif1}
| | ... | vrf=${fib_table_1}
| | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut1_if1}
| | ...
| | ... | \| Scale IPv6 forwarding initialized in a 3-node circular topology \
| | ... | \| 100000 \|
+| | ...
| | [Arguments] | ${count}
+| | ...
| | ${subn_prefix}= | Set Variable | 64
| | ${host_prefix}= | Set Variable | 128
| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | 2001:3::1 | ${subn_prefix}
| | ...
| | ... | \| L2 xconnect with Vhost-User initialized in a 3-node \
| | ... | circular topology \| /tmp/sock1 \| /tmp/sock2 \|
+| | ...
| | [Arguments] | ${sock1} | ${sock2}
+| | ...
| | VPP Vhost interfaces for L2BD forwarding are setup | ${dut1}
| | ... | ${sock1} | ${sock2}
| | L2 setup xconnect on DUT | ${dut1} | ${dut1_if1} | ${vhost_if1}
| | ... | Setup L2 DB topology by adding two interfaces on each DUT into BD
| | ... | that is created automatically with index 1. Learning is enabled.
| | ... | Interfaces are brought up.
-| | ... |
+| | ...
| | Vpp l2bd forwarding setup | ${dut1} | ${dut1_if1} | ${dut1_if2}
| | Vpp l2bd forwarding setup | ${dut2} | ${dut2_if1} | ${dut2_if2}
| | All Vpp Interfaces Ready Wait | ${nodes}
| | ...
| | ... | \| L2 bridge domains with Vhost-User initialized in a 3-node \
| | ... | circular topology \| 1 \| 2 \| /tmp/sock1 \| /tmp/sock2 \|
+| | ...
| | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2}
+| | ...
| | VPP Vhost interfaces for L2BD forwarding are setup | ${dut1}
| | ... | ${sock1} | ${sock2}
| | Interface is added to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1}
| | [Arguments] | ${topology_type} | ${nic_model}
| | ...
| | Show vpp version on all DUTs
-| | Setup performance global Variables
| | 2-node circular Topology Variables Setup with DUT interface model
| | ... | ${nic_model}
| | Setup 2-node startup configuration of VPP on all DUTs
| | ... | ${tg_if2_dest_mac}
| | ...
| | Show vpp version on all DUTs
-| | Setup performance global Variables
| | 2-node circular Topology Variables Setup with DUT interface model
| | ... | ${nic_model}
| | Setup 2-node startup configuration of VPP on all DUTs
| | ... | *Example:*
| | ...
| | ... | \| 3-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \|
+| | ...
| | [Arguments] | ${topology_type} | ${nic_model}
+| | ...
| | Show vpp version on all DUTs
-| | Setup performance global Variables
| | 3-node circular Topology Variables Setup with DUT interface model
| | ... | ${nic_model}
| | Setup default startup configuration of VPP on all DUTs
| | [Arguments] | ${framesize} | ${start_rate} | ${step_rate}
| | ... | ${topology_type} | ${min_rate} | ${max_rate}
| | ...
-| | ${duration}= | Set Variable | 10
+| | ${duration}= | Set Variable | ${perf_trial_duration}
| | Set Duration | ${duration}
| | Set Search Rate Boundaries | ${max_rate} | ${min_rate}
| | Set Search Linear Step | ${step_rate}
| | ... | ${topology_type} | ${min_rate} | ${max_rate}
| | ... | ${loss_acceptance}=0 | ${loss_acceptance_type}='frames'
| | ...
-| | ${duration}= | Set Variable | 10
+| | ${duration}= | Set Variable | ${perf_trial_duration}
| | Set Duration | ${duration}
| | Set Search Rate Boundaries | ${max_rate} | ${min_rate}
| | Set Search Linear Step | ${step_rate}
| | [Arguments] | ${framesize} | ${binary_min} | ${binary_max}
| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold}
| | ...
-| | ${duration}= | Set Variable | 10
+| | ${duration}= | Set Variable | ${perf_trial_duration}
| | Set Duration | ${duration}
| | Set Search Rate Boundaries | ${max_rate} | ${min_rate}
| | Set Search Frame Size | ${framesize}
| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold}
| | ... | ${loss_acceptance}=0 | ${loss_acceptance_type}='frames'
| | ...
-| | ${duration}= | Set Variable | 10
+| | ${duration}= | Set Variable | ${perf_trial_duration}
| | Set Duration | ${duration}
| | Set Search Rate Boundaries | ${max_rate} | ${min_rate}
| | Set Search Frame Size | ${framesize}
| | [Arguments] | ${framesize} | ${start_rate} | ${step_rate}
| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold}
| | ...
-| | ${duration}= | Set Variable | 10
+| | ${duration}= | Set Variable | ${perf_trial_duration}
| | Set Duration | ${duration}
| | Set Search Rate Boundaries | ${max_rate} | ${min_rate}
| | Set Search Linear Step | ${step_rate}
| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold}
| | ... | ${loss_acceptance}=0 | ${loss_acceptance_type}='frames'
| | ...
-| | ${duration}= | Set Variable | 10
+| | ${duration}= | Set Variable | ${perf_trial_duration}
| | Set Duration | ${duration}
| | Set Search Rate Boundaries | ${max_rate} | ${min_rate}
| | Set Search Linear Step | ${step_rate}
| | ... | - rate - Rate for sending packets. Type: string
| | ... | - framesize - L2 Frame Size [B]. Type: integer
| | ... | - topology_type - Topology type. Type: string
+| | ... | - fail_on_loss - If True, the keyword fails if loss occurred.
+| | ... | Type: boolean
| | ...
| | ... | *Example:*
| | ...
| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node}
| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1
| | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048
-| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${glob_vm_image}
+| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${perf_vm_image}
| | ${vm}= | Run keyword | ${vm_name}.Qemu Start
| | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus}
| | Run keyword | ${vm_name}.Qemu Set Scheduler Policy
| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node}
| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1
| | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048
-| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${glob_vm_image}
+| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${perf_vm_image}
| | ${vm}= | Run keyword | ${vm_name}.Qemu Start
| | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus}
| | Run keyword | ${vm_name}.Qemu Set Scheduler Policy
| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node}
| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1
| | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048
-| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${glob_vm_image}
+| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${perf_vm_image}
| | ${vm}= | Run keyword | ${vm_name}.Qemu Start
| | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus}
| | Run keyword | ${vm_name}.Qemu Set Scheduler Policy
| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node}
| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1
| | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048
-| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${glob_vm_image}
+| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${perf_vm_image}
| | ${vm}= | Run keyword | ${vm_name}.Qemu Start
| | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus}
| | Run keyword | ${vm_name}.Qemu Set Scheduler Policy
| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node}
| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1
| | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048
-| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${glob_vm_image}
+| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${perf_vm_image}
| | ${vm}= | Run keyword | ${vm_name}.Qemu Start
| | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus}
| | Run keyword | ${vm_name}.Qemu Set Scheduler Policy
| | Run keyword | ${vm_name}.Qemu Set Node | ${dut_node}
| | Run keyword | ${vm_name}.Qemu Set Smp | ${count} | ${count} | 1 | 1
| | Run keyword | ${vm_name}.Qemu Set Mem Size | 2048
-| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${glob_vm_image}
+| | Run keyword | ${vm_name}.Qemu Set Disk Image | ${perf_vm_image}
| | ${vm}= | Run keyword | ${vm_name}.Qemu Start
| | Run keyword | ${vm_name}.Qemu Set Affinity | @{qemu_cpus}
| | Run keyword | ${vm_name}.Qemu Set Scheduler Policy
| | ...
| | [Arguments] | ${topology_type} | ${nic_model}
| | ...
-| | Setup performance global Variables
| | 2-node circular Topology Variables Setup with DUT interface model
| | ... | ${nic_model}
| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
| | ...
| | [Arguments] | ${topology_type} | ${nic_model}
| | ...
-| | Setup performance global Variables
| | 3-node circular Topology Variables Setup with DUT interface model
| | ... | ${nic_model}
| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
| | ... | Variable Should Exist | ${DPDK_TEST}
| | Return From Keyword If | "${ret}" == "PASS" | ${TRUE}
| | Return From Keyword | ${FALSE}
+
+| Performance test setup
+| | [Documentation] | Common test setup for performance tests.
+| | ...
+| | Setup all DUTs before test
+| | Reset VAT History On All DUTs | ${nodes}
+
+| Performance test teardown
+| | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \
+| | ... | tests.
+| | ...
+| | ... | *Arguments:*
+| | ... | - rate - Rate for sending packets. Type: string
+| | ... | - framesize - L2 Frame Size [B]. Type: integer
+| | ... | - topology_type - Topology type. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Performance test teardown \| 4.0mpps \| 64 \| 3-node-IPv4 \|
+| | ...
+| | [Arguments] | ${rate} | ${framesize} | ${topology_type}
+| | ...
+| | Show VAT History On All DUTs | ${nodes}
+| | Show statistics on all DUTs
+| | Run Keyword If Test Failed
+| | ... | Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | ${topology_type} | fail_on_loss=${False}
+| | Remove startup configuration of VPP from all DUTs
+
+| Performance ndrchk test teardown
+| | [Documentation] | Common test teardown for ndrchk performance tests.
+| | ...
+| | Show VAT History On All DUTs | ${nodes}
+| | Show statistics on all DUTs
+| | Remove startup configuration of VPP from all DUTs
+
+| Performance test with vhost and VM with dpdk-testpmd teardown
+| | [Documentation] | Common test teardown for performance tests which use
+| | ... | vhost(s) and VM(s) with dpdk-testpmd.
+| | ...
+| | ... | *Arguments:*
+| | ... | - rate - Rate for sending packets. Type: string
+| | ... | - framesize - L2 Frame Size [B]. Type: integer
+| | ... | - topology_type - Topology type. Type: string
+| | ... | - dut1_node - Node where to clean qemu. Type: dictionary
+| | ... | - dut1_vm_refs - VM references on node. Type: dictionary
+| | ... | - dut2_node - Node where to clean qemu. Type: dictionary
+| | ... | - dut2_vm_refs - VM references on node. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Performance test with vhost and VM with dpdk-testpmd teardown \
+| | ... | \| 4.0mpps \| 64 \| 3-node-IPv4 \| ${node['DUT1']} \| ${dut_vm_refs} \
+| | ... | \| ${node['DUT2']} \| ${dut_vm_refs} \|
+| | ...
+| | [Arguments] | ${rate} | ${framesize} | ${topology_type}
+| | ... | ${dut1_node}=${None} | ${dut1_vm_refs}=${None}
+| | ... | ${dut2_node}=${None} | ${dut2_vm_refs}=${None}
+| | ...
+| | Show VAT History On All DUTs | ${nodes}
+| | Show Vpp Vhost On All DUTs
+| | Show statistics on all DUTs
+| | Run Keyword If Test Failed
+| | ... | Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | ${topology_type} | fail_on_loss=${False}
+| | Remove startup configuration of VPP from all DUTs
+| | Run keyword unless | ${dut1_node}==${None}
+| | ... | Guest VM with dpdk-testpmd Teardown | ${dut1} | ${dut1_vm_refs}
+| | Run keyword unless | ${dut2_node}==${None}
+| | ... | Guest VM with dpdk-testpmd Teardown | ${dut2} | ${dut2_vm_refs}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
| ... | NIC_Cisco-VIC-1227 | ETH | L2BDMACLRN | BASE
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Cisco-VIC-1227
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-bridge
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-bridge
+| ...
| Documentation | *RFC2544: Pkt throughput L2BD test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
| | Set Test Documentation | [Ver] Find PDR for ${framesize} Byte\ | append=True
| | Set Test Documentation | frames using binary search start at\ | append=True
| | Set Test Documentation | 10GE linerate, step ${threshold}pps, | append=True
-| | Set Test Documentation | LT=${glob_loss_acceptance} | append=True
-| | Set Test Documentation | ${glob_loss_acceptance_type}. | append=True
+| | Set Test Documentation | LT=${perf_pdr_loss_acceptance} | append=True
+| | Set Test Documentation | ${perf_pdr_loss_acceptance_type}. | append=True
| | Add '${wt}' worker threads and rxqueues '${rxq}' in 3-node single-link topo
| | Add PCI devices to DUTs from 3-node single link topology
| | Run Keyword If | ${framesize} < ${1522} | Add No Multi Seg to all DUTs
| | Find PDR using binary search and pps
| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
*** Test Cases ***
| tc01-64B-1t1c-eth-l2bdbasemaclrn-ndrdisc
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Resource | resources/libraries/robot/tagging.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
-| ... | NIC_Intel-X520-DA2 | L2XCFWD | BASE | DOT1AD
+| ... | NIC_Intel-X520-DA2 | L2XCFWD | BASE | DOT1AD
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
| Documentation | *Reference NDR throughput L2XC with 802.1ad verify test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | ... | frames using single trial throughput test at 2x 2.9mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 2.9mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP interfaces in path are up in a 3-node circular topology
| | When VLAN subinterfaces initialized on 3-node topology
| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
| | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif}
| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc02-1514B-1t1c-dot1ad-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 810635pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1514
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 810635pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP interfaces in path are up in a 3-node circular topology
| | When VLAN subinterfaces initialized on 3-node topology
| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
| | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif}
| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc03-9000B-1t1c-dot1ad-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138458pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138458pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP interfaces in path are up in a 3-node circular topology
| | When VLAN subinterfaces initialized on 3-node topology
| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
| | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif}
| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc04-64B-2t2c-dot1ad-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 7.0mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 7.0mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP interfaces in path are up in a 3-node circular topology
| | When VLAN subinterfaces initialized on 3-node topology
| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
| | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif}
| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc05-1514B-2t2c-dot1ad-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 810635pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1514
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 810635pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP interfaces in path are up in a 3-node circular topology
| | When VLAN subinterfaces initialized on 3-node topology
| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
| | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif}
| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc06-9000B-2t2c-dot1ad-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138458pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138458pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP interfaces in path are up in a 3-node circular topology
| | When VLAN subinterfaces initialized on 3-node topology
| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
| | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif}
| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc07-64B-4t4c-dot1ad-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 8.0mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 8.0mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP interfaces in path are up in a 3-node circular topology
| | When VLAN subinterfaces initialized on 3-node topology
| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
| | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif}
| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc08-1514B-4t4c-dot1ad-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 810635pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1514
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 810635pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP interfaces in path are up in a 3-node circular topology
| | When VLAN subinterfaces initialized on 3-node topology
| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
| | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif}
| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc09-9000B-4t4c-dot1ad-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138458pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138458pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP interfaces in path are up in a 3-node circular topology
| | When VLAN subinterfaces initialized on 3-node topology
| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
| | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif}
| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Resource | resources/libraries/robot/tagging.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | L2XCFWD | BASE | DOT1AD
+| ... | NIC_Intel-X520-DA2 | L2XCFWD | BASE | DOT1AD
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-xconnect
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-xconnect
+| ...
| Documentation | *RFC2544: Pkt throughput L2XC with 802.1ad test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ${inner_vlan_id}= | 200
| ${type_subif}= | two_tags
| ${tag_rewrite}= | pop-2
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
*** Test Cases ***
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1514B-1t1c-dot1ad-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-dot1ad-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-dot1ad-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1514B-2t2c-dot1ad-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-dot1ad-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-dot1ad-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1514B-4t4c-dot1ad-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-dot1ad-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.QemuUtils
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | DOT1Q | L2BDMACLRN | BASE | VHOST | VM
+| ... | NIC_Intel-X520-DA2 | DOT1Q | L2BDMACLRN | BASE | VHOST | VM
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-bridge
-| ... | fail_on_loss=${False}
-| ... | AND | Show Vpp Vhost On All DUTs
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut1}
-| ... | ${dut1_vm_refs}
-| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut2}
-| ... | ${dut2_vm_refs}
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test with vhost and VM with dpdk-testpmd teardown
+| ... | ${min_rate}pps | ${framesize} | 3-node-bridge
+| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
+| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs}
+| ...
| Documentation | *RFC2544: Packet throughput L2BD test cases with vhost*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-IMIX-1t1c-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-IMIX-2t2c-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-IMIX-4t4c-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.NodePath
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | DOT1Q | L2XCFWD | BASE | VHOST | VM
+| ... | NIC_Intel-X520-DA2 | DOT1Q | L2XCFWD | BASE | VHOST | VM
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-bridge
-| ... | fail_on_loss=${False}
-| ... | AND | Show Vpp Vhost On All DUTs
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut1}
-| ... | ${dut1_vm_refs}
-| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut2}
-| ... | ${dut2_vm_refs}
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test with vhost and VM with dpdk-testpmd teardown
+| ... | ${min_rate}pps | ${framesize} | 3-node-xconnect
+| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
+| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs}
+| ...
| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-IMIX-1t1c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-IMIX-2t2c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-IMIX-4t4c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Resource | resources/libraries/robot/tagging.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
-| ... | NIC_Intel-X520-DA2 | L2XCFWD | BASE | DOT1Q
+| ... | NIC_Intel-X520-DA2 | L2XCFWD | BASE | DOT1Q
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
| Documentation | *Reference NDR throughput L2XC with 802.1q verify test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | ... | frames using single trial throughput test at 2x 2.9mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 2.9mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP interfaces in path are up in a 3-node circular topology
| | When VLAN dot1q subinterfaces initialized on 3-node topology
| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
| | And L2 tag rewrite method setup on interfaces
| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc02-1518B-1t1c-dot1q-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 720000pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 720000pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP interfaces in path are up in a 3-node circular topology
| | When VLAN dot1q subinterfaces initialized on 3-node topology
| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
| | And L2 tag rewrite method setup on interfaces
| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc03-9000B-1t1c-dot1q-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 120000pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 120000pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP interfaces in path are up in a 3-node circular topology
| | When VLAN dot1q subinterfaces initialized on 3-node topology
| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
| | And L2 tag rewrite method setup on interfaces
| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc04-64B-2t2c-dot1q-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 7.0mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 7.0mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP interfaces in path are up in a 3-node circular topology
| | When VLAN dot1q subinterfaces initialized on 3-node topology
| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
| | And L2 tag rewrite method setup on interfaces
| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc05-1518B-2t2c-dot1q-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 720000pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 720000pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP interfaces in path are up in a 3-node circular topology
| | When VLAN dot1q subinterfaces initialized on 3-node topology
| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
| | And L2 tag rewrite method setup on interfaces
| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc06-9000B-2t2c-dot1q-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 120000pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 120000pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP interfaces in path are up in a 3-node circular topology
| | When VLAN dot1q subinterfaces initialized on 3-node topology
| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
| | And L2 tag rewrite method setup on interfaces
| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc07-64B-4t4c-dot1q-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 11.0mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 11.0mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP interfaces in path are up in a 3-node circular topology
| | When VLAN dot1q subinterfaces initialized on 3-node topology
| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
| | And L2 tag rewrite method setup on interfaces
| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc08-1518B-4t4c-dot1q-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 720000pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 720000pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP interfaces in path are up in a 3-node circular topology
| | When VLAN dot1q subinterfaces initialized on 3-node topology
| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
| | And L2 tag rewrite method setup on interfaces
| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc09-9000B-4t4c-dot1q-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 120000pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 120000pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And VPP interfaces in path are up in a 3-node circular topology
| | When VLAN dot1q subinterfaces initialized on 3-node topology
| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
| | And L2 tag rewrite method setup on interfaces
| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Resource | resources/libraries/robot/tagging.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | L2XCFWD | BASE | DOT1Q
+| ... | NIC_Intel-X520-DA2 | L2XCFWD | BASE | DOT1Q
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-xconnect
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-xconnect
+| ...
| Documentation | *RFC2544: Pkt throughput L2XC with 802.1q test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
*** Variables ***
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
*** Test Cases ***
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-dot1q-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-dot1q-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-dot1q-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-dot1q-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-dot1q-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-dot1q-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-dot1q-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-dot1q-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.QemuUtils
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | BASE | VHOST | VM
+| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | BASE | VHOST | VM
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-bridge
-| ... | fail_on_loss=${False}
-| ... | AND | Show Vpp Vhost On All DUTs
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut1}
-| ... | ${dut1_vm_refs}
-| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut2}
-| ... | ${dut2_vm_refs}
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test with vhost and VM with dpdk-testpmd teardown
+| ... | ${min_rate}pps | ${framesize} | 3-node-bridge
+| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
+| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs}
+| ...
| Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
-#Socket names
+# Socket names
| ${bd_id1}= | 1
| ${bd_id2}= | 2
| ${sock1}= | /tmp/sock-1-${bd_id1}
| | ... | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.NodePath
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
-| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | BASE
+| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | BASE
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
| Documentation | *Reference NDR throughput L2BD verify test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | ... | frames using single trial throughput test at 2x 3.2mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 3.2mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 bridge domain initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-bridge
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 bridge domain initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-bridge
| tc02-1518B-1t1c-eth-l2bdbasemaclrn-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 bridge domain initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-bridge
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 bridge domain initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-bridge
| tc03-9000B-1t1c-eth-l2bdbasemaclrn-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 bridge domain initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-bridge
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 bridge domain initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-bridge
| tc04-64B-2t2c-eth-l2bdbasemaclrn-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 6.9mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 6.9mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 bridge domain initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-bridge
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 bridge domain initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-bridge
| tc05-1518B-2t2c-eth-l2bdbasemaclrn-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 bridge domain initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-bridge
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 bridge domain initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-bridge
| tc06-9000B-2t2c-eth-l2bdbasemaclrn-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 bridge domain initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-bridge
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 bridge domain initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-bridge
| tc07-64B-4t4c-eth-l2bdbasemaclrn-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 7.4mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 7.4mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 bridge domain initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-bridge
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 bridge domain initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-bridge
| tc08-1518B-4t4c-eth-l2bdbasemaclrn-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 bridge domain initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-bridge
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 bridge domain initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-bridge
| tc09-9000B-4t4c-eth-l2bdbasemaclrn-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 bridge domain initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-bridge
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 bridge domain initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-bridge
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | BASE
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-bridge
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-bridge
+| ...
| Documentation | *RFC2544: Pkt throughput L2BD test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
*** Keywords ***
| | Find PDR using binary search and pps
| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
*** Test Cases ***
| tc01-64B-1t1c-eth-l2bdbasemaclrn-ndrdisc
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.NodePath
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE | VHOST | VM
+| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE | VHOST | VM
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-bridge
-| ... | fail_on_loss=${False}
-| ... | AND | Show Vpp Vhost On All DUTs
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut1}
-| ... | ${dut1_vm_refs}
-| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut2}
-| ... | ${dut2_vm_refs}
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test with vhost and VM with dpdk-testpmd teardown
+| ... | ${min_rate}pps | ${framesize} | 3-node-xconnect
+| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
+| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs}
+| ...
| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ${bd_id2}= | 2
| ${sock1}= | /tmp/sock-1-${bd_id1}
| ${sock2}= | /tmp/sock-1-${bd_id2}
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
*** Test Cases ***
| | ... | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-IMIX-1t1c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-IMIX-2t2c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-IMIX-4t4c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.InterfaceUtil
| Library | resources.libraries.python.NodePath
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
-| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE
+| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
| Documentation | *Reference NDR throughput L2XC verify test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | ... | frames using single trial throughput test at 2x 3.6mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 3.6mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 xconnect initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc02-1518B-1t1c-eth-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 xconnect initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc03-9000B-1t1c-eth-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 xconnect initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc04-64B-2t2c-eth-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 8.3mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 8.3mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 xconnect initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc05-1518B-2t2c-eth-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 xconnect initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc06-9000B-2t2c-eth-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 xconnect initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc07-64B-4t4c-eth-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 9.3mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 9.3mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 xconnect initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc08-1518B-4t4c-eth-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 xconnect initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc09-9000B-4t4c-eth-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 xconnect initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.InterfaceUtil
| Library | resources.libraries.python.NodePath
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE
+| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-xconnect
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-xconnect
+| ...
| Documentation | *RFC2544: Pkt throughput L2XC test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
*** Test Cases ***
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-eth-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-eth-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-eth-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-eth-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-eth-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-eth-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-eth-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-eth-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc19-IMIX-1t1c-eth-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.Cop
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
+| ... | WITH NAME | dut1_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']}
+| ... | WITH NAME | dut2_v4
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
-| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | COPWHLIST
+| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | COPWHLIST
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
| Documentation | *Reference NDR throughput IPv4 whitelist verify test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | ... | at 2x 3.5mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 3.5mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
-| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 |Â local
-| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 |Â local
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 |Â local
+| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 |Â local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc02-1518B-1t1c-ethip4-ip4base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | at 2x 812743pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
-| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 |Â local
-| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 |Â local
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 |Â local
+| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 |Â local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc03-9000B-1t1c-ethip4-ip4base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | at 2x 138580pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
-| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 |Â local
-| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 |Â local
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 |Â local
+| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 |Â local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc04-64B-2t2c-ethip4-ip4base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | at 2x 6.6mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 6.6mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
-| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 |Â local
-| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 |Â local
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 |Â local
+| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 |Â local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc05-1518B-2t2c-ethip4-ip4base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | at 2x 812743pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
-| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 |Â local
-| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 |Â local
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 |Â local
+| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 |Â local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc06-9000B-2t2c-ethip4-ip4base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | at 2x 138580pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
-| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 |Â local
-| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 |Â local
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 |Â local
+| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 |Â local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc07-64B-4t4c-ethip4-ip4base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | at 2x 10.0mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 10.0mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
-| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 |Â local
-| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 |Â local
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 |Â local
+| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 |Â local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc08-1518B-4t4c-ethip4-ip4base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | at 2x 812743pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
-| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 |Â local
-| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 |Â local
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 |Â local
+| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 |Â local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc09-9000B-4t4c-ethip4-ip4base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | at 2x 138580pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
-| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 |Â local
-| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 |Â local
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 |Â local
+| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 |Â local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.Cop
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
+| ... | WITH NAME | dut1_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']}
+| ... | WITH NAME | dut2_v4
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | COPWHLIST
+| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | COPWHLIST
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-IPv4
+| ...
| Documentation | *RFC2544: Pkt throughput IPv4 whitelist test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
*** Test Cases ***
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-ethip4-ip4base-copwhtlistbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-ethip4-ip4base-copwhtlistbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-ethip4-ip4base-copwhtlistbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-ethip4-ip4base-copwhtlistbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-ethip4-ip4base-copwhtlistbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-ethip4-ip4base-copwhtlistbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-ethip4-ip4base-copwhtlistbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-ethip4-ip4base-copwhtlistbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.QemuUtils
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | BASE | VHOST | VM
+| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | BASE | VHOST | VM
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4
-| ... | fail_on_loss=${False}
-| ... | AND | Show Vpp Vhost On All DUTs
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut1}
-| ... | ${dut1_vm_refs}
-| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut2}
-| ... | ${dut2_vm_refs}
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test with vhost and VM with dpdk-testpmd teardown
+| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4
+| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
+| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs}
+| ...
| Documentation | *RFC2544: Pkt throughput IPv4 test cases with vhost*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-ethip4-ip4base-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-IMIX-1t1c-ethip4-ip4base-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-ethip4-ip4base-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-ethip4-ip4base-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-IMIX-2t2c-ethip4-ip4base-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-ethip4-ip4base-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-ethip4-ip4base-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-IMIX-4t4c-ethip4-ip4base-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.Classify.Classify
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
+| ... | WITH NAME | dut1_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']}
+| ... | WITH NAME | dut2_v4
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
-| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | IACLDST
+| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | IACLDST
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
| Documentation | *Reference NDR throughput IPv4 whitelist verify test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | ... | at 2x 3.1mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 3.1mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
| | ... | ${dut1} | ip4 | dst
| | And Vpp Configures Classify Session L3
| | ... | ip4 | dst | 10.10.10.2
| | And Vpp Enable Input Acl Interface
| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc02-1518B-1t1c-ethip4-ip4base-iacldstbase-ndrchk
| | [Documentation]
| | ... | at 2x 812743pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
| | ... | ${dut1} | ip4 | dst
| | And Vpp Configures Classify Session L3
| | ... | ip4 | dst | 10.10.10.2
| | And Vpp Enable Input Acl Interface
| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc03-9000B-1t1c-ethip4-ip4base-iacldstbase-ndrchk
| | [Documentation]
| | ... | at 2x 138580pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
| | ... | ${dut1} | ip4 | dst
| | And Vpp Configures Classify Session L3
| | ... | ip4 | dst | 10.10.10.2
| | And Vpp Enable Input Acl Interface
| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc04-64B-2t2c-ethip4-ip4base-iacldstbase-ndrchk
| | [Documentation]
| | ... | at 2x 5.8mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 5.8mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
| | ... | ${dut1} | ip4 | dst
| | And Vpp Configures Classify Session L3
| | ... | ip4 | dst | 10.10.10.2
| | And Vpp Enable Input Acl Interface
| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc05-1518B-2t2c-ethip4-ip4base-iacldstbase-ndrchk
| | [Documentation]
| | ... | at 2x 812743pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
| | ... | ${dut1} | ip4 | dst
| | And Vpp Configures Classify Session L3
| | ... | ip4 | dst | 10.10.10.2
| | And Vpp Enable Input Acl Interface
| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc06-9000B-2t2c-ethip4-ip4base-iacldstbase-ndrchk
| | [Documentation]
| | ... | at 2x 138580pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
| | ... | ${dut1} | ip4 | dst
| | And Vpp Configures Classify Session L3
| | ... | ip4 | dst | 10.10.10.2
| | And Vpp Enable Input Acl Interface
| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc07-64B-4t4c-ethip4-ip4base-iacldstbase-ndrchk
| | [Documentation]
| | ... | at 2x 7.8mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 7.8mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv4 forwarding initialized in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
| | ... | ${dut1} | ip4 | dst
| | And Vpp Configures Classify Session L3
| | ... | ip4 | dst | 10.10.10.2
| | And Vpp Enable Input Acl Interface
| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc08-1518B-4t4c-ethip4-ip4base-iacldstbase-ndrchk
| | [Documentation]
| | ... | at 2x 812743pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
| | ... | ${dut1} | ip4 | dst
| | And Vpp Configures Classify Session L3
| | ... | ip4 | dst | 10.10.10.2
| | And Vpp Enable Input Acl Interface
| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc09-9000B-4t4c-ethip4-ip4base-iacldstbase-ndrchk
| | [Documentation]
| | ... | at 2x 138580pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
| | ... | ${dut1} | ip4 | dst
| | And Vpp Configures Classify Session L3
| | ... | ip4 | dst | 10.10.10.2
| | And Vpp Enable Input Acl Interface
| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.Classify.Classify
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
+| ... | WITH NAME | dut1_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']}
+| ... | WITH NAME | dut2_v4
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | IACLDST
+| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | IACLDST
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-IPv4
+| ...
| Documentation | *RFC2544: Pkt throughput IPv4 iAcl whitelist test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
*** Test Cases ***
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-ethip4-ip4base-iacldstbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-ethip4-ip4base-iacldstbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-ethip4-ip4base-iacldstbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-ethip4-ip4base-iacldstbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-ethip4-ip4base-iacldstbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-ethip4-ip4base-iacldstbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-ethip4-ip4base-iacldstbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-ethip4-ip4base-iacldstbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.Policer
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
+| ... | WITH NAME | dut1_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']}
+| ... | WITH NAME | dut2_v4
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
-| ... | NIC_Intel-X520-DA2 | IP4FWD | BASE | DOT1Q
+| ... | NIC_Intel-X520-DA2 | IP4FWD | BASE | DOT1Q
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
| Documentation | *Reference NDR throughput IPv4 policer verify test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | ... | Byte frames using single trial throughput test at 2x 3.1mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 3.1mpps
| | Set Test Variable | ${cb} | ${framesize}
| | Set Test Variable | ${eb} | ${framesize}
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv4 forwarding initialized in a 3-node circular topology
-| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc02-1518B-1t1c-ethip4-ip4base-ipolicemarkbase-ndrchk
| | [Documentation]
| | ... | Byte frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Set Test Variable | ${cb} | ${framesize}
| | Set Test Variable | ${eb} | ${framesize}
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv4 forwarding initialized in a 3-node circular topology
-| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
+| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc03-9000B-1t1c-ethip4-ip4base-ipolicemarkbase-ndrchk
| | [Documentation]
| | ... | Byte frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Set Test Variable | ${cb} | ${framesize}
| | Set Test Variable | ${eb} | ${framesize}
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv4 forwarding initialized in a 3-node circular topology
-| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc04-64B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrchk
| | [Documentation]
| | ... | 64 Byte frames using single trial throughput test at 2x 5.6mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 5.6mpps
| | Set Test Variable | ${cb} | ${framesize}
| | Set Test Variable | ${eb} | ${framesize}
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv4 forwarding initialized in a 3-node circular topology
-| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc05-1518B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrchk
| | [Documentation]
| | ... | 1518 Byte frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Set Test Variable | ${cb} | ${framesize}
| | Set Test Variable | ${eb} | ${framesize}
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv4 forwarding initialized in a 3-node circular topology
-| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc06-9000B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrchk
| | [Documentation]
| | ... | 9000 Byte frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Set Test Variable | ${cb} | ${framesize}
| | Set Test Variable | ${eb} | ${framesize}
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv4 forwarding initialized in a 3-node circular topology
-| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc07-64B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrchk
| | [Documentation]
| | ... | Byte frames using single trial throughput test at 2x 8.9mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 8.9mpps
| | Set Test Variable | ${cb} | ${framesize}
| | Set Test Variable | ${eb} | ${framesize}
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv4 forwarding initialized in a 3-node circular topology
-| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc08-1518B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrchk
| | [Documentation]
| | ... | 1518 Byte frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Set Test Variable | ${cb} | ${framesize}
| | Set Test Variable | ${eb} | ${framesize}
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv4 forwarding initialized in a 3-node circular topology
-| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc09-9000B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrchk
| | [Documentation]
| | ... | 9000 Byte frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Set Test Variable | ${cb} | ${framesize}
| | Set Test Variable | ${eb} | ${framesize}
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv4 forwarding initialized in a 3-node circular topology
-| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.Policer
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
+| ... | WITH NAME | dut1_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']}
+| ... | WITH NAME | dut2_v4
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | IP4FWD | BASE | DOT1Q
+| ... | NIC_Intel-X520-DA2 | IP4FWD | BASE | DOT1Q
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-IPv4
+| ...
| Documentation | *RFC2544: Pkt throughput IPv4 policer test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC2698.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
| ${cir}= | ${100}
| ${eir}= | ${150}
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-ethip4-ip4base-ipolicemarkbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-ethip4-ip4base-ipolicemarkbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| Library | resources.libraries.python.topology.Topology
| Library | resources.libraries.python.NodePath
| Library | resources.libraries.python.InterfaceUtil
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
+| ... | WITH NAME | dut1_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']}
+| ... | WITH NAME | dut2_v4
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
-| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | BASE
+| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | BASE
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
| Documentation | *Reference NDR throughput IPv4 routing verify test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | ... | frames using single trial throughput test at 2x 3.5mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 3.5mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv4 forwarding initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc02-1518B-1t1c-ethip4-ip4base-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv4 forwarding initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc03-9000B-1t1c-ethip4-ip4base-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv4 forwarding initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc04-64B-2t2c-ethip4-ip4base-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 7.5mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 7.5mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv4 forwarding initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc05-1518B-2t2c-ethip4-ip4base-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv4 forwarding initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc06-9000B-2t2c-ethip4-ip4base-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv4 forwarding initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc07-64B-4t4c-ethip4-ip4base-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 10.0mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 10.0mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv4 forwarding initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc08-1518B-4t4c-ethip4-ip4base-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv4 forwarding initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc08-9000B-4t4c-ethip4-ip4base-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv4 forwarding initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| Library | resources.libraries.python.topology.Topology
| Library | resources.libraries.python.NodePath
| Library | resources.libraries.python.InterfaceUtil
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
+| ... | WITH NAME | dut1_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']}
+| ... | WITH NAME | dut2_v4
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | BASE
+| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | BASE
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-IPv4
+| ...
| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
*** Test Cases ***
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-ethip4-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-ethip4-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-ethip4-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-ethip4-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-ethip4-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-ethip4-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-ethip4-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-ethip4-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc19-IMIX-1t1c-ethip4-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
-| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_200K
+| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_200K
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
| Documentation | *Reference NDR throughput IPv4 routing verify test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | ... | frames using single trial throughput test at 2x 3.5mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 3.5mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc02-1518B-1t1c-ethip4-ip4scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc03-9000B-1t1c-ethip4-ip4scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc04-64B-2t2c-ethip4-ip4scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 7.5mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 7.5mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc05-1518B-2t2c-ethip4-ip4scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc06-9000B-2t2c-ethip4-ip4scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc07-64B-4t4c-ethip4-ip4scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 10.0mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 10.0mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc08-1518B-4t4c-ethip4-ip4scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc09-9000B-4t4c-ethip4-ip4scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_200K
+| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_200K
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-IPv4-dst-${rts_per_flow}
+| ...
| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
| ${rts_per_flow}= | 100000
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-ethip4-ip4scale200k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-ethip4-ip4scale200k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-ethip4-ip4scale200k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-ethip4-ip4scale200k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-ethip4-ip4scale200k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-ethip4-ip4scale200k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-ethip4-ip4scale200k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-ethip4-ip4scale200k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
-| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_20K
+| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_20K
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
| Documentation | *Reference NDR throughput IPv4 routing verify test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | ... | frames using single trial throughput test at 2x 3.5mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 3.5mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc02-1518B-1t1c-ethip4-ip4scale20k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc03-9000B-1t1c-ethip4-ip4scale20k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc04-64B-2t2c-ethip4-ip4scale20k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 7.5mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 7.5mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc05-1518B-2t2c-ethip4-ip4scale20k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc06-9000B-2t2c-ethip4-ip4scale20k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc07-64B-4t4c-ethip4-ip4scale20k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 10.0mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 10.0mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc08-1518B-4t4c-ethip4-ip4scale20k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc09-9000B-4t4c-ethip4-ip4scale20k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_20K
+| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_20K
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-IPv4-dst-${rts_per_flow}
+| ...
| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
| ${rts_per_flow}= | ${10000}
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-ethip4-ip4scale20k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-ethip4-ip4scale20k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-ethip4-ip4scale20k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-ethip4-ip4scale20k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-ethip4-ip4scale20k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-ethip4-ip4scale20k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-ethip4-ip4scale20k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-ethip4-ip4scale20k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
-| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_2M
+| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_2M
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
| Documentation | *Reference NDR throughput IPv4 routing verify test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | ... | frames using single trial throughput test at 2x 3.5mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 3.5mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Add Heapsize Config to all DUTs | 3G
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Add Heapsize Config to all DUTs | 3G
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc02-1518B-1t1c-ethip4-ip4scale2m-ndrchk
| | [Documentation]
| | ... | receive queue per NIC port at 2x 812743pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Add Heapsize Config to all DUTs | 3G
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Add Heapsize Config to all DUTs | 3G
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc03-9000B-1t1c-ethip4-ip4scale2m-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add Heapsize Config to all DUTs | 3G
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add Heapsize Config to all DUTs | 3G
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc04-64B-2t2c-ethip4-ip4scale2m-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 7.5mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 7.5mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Add Heapsize Config to all DUTs | 3G
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Add Heapsize Config to all DUTs | 3G
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc05-1518B-2t2c-ethip4-ip4scale2m-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Add Heapsize Config to all DUTs | 3G
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Add Heapsize Config to all DUTs | 3G
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc06-9000B-2t2c-ethip4-ip4scale2m-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add Heapsize Config to all DUTs | 3G
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add Heapsize Config to all DUTs | 3G
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc07-64B-4t4c-ethip4-ip4scale2m-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 10.0mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 10.0mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Add Heapsize Config to all DUTs | 3G
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Add Heapsize Config to all DUTs | 3G
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc08-1518B-4t4c-ethip4-ip4scale2m-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Add Heapsize Config to all DUTs | 3G
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Add Heapsize Config to all DUTs | 3G
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
| tc09-9000B-4t4c-ethip4-ip4scale2m-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add Heapsize Config to all DUTs | 3G
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv4-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add Heapsize Config to all DUTs | 3G
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_2M
+| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_2M
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4-dst-${rts_per_flow}
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-IPv4-dst-${rts_per_flow}
+| ...
| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
| ${rts_per_flow}= | ${1000000}
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-ethip4-ip4scale2m-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-ethip4-ip4scale2m-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-ethip4-ip4scale2m-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-ethip4-ip4scale2m-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-ethip4-ip4scale2m-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-ethip4-ip4scale2m-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-ethip4-ip4scale2m-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-ethip4-ip4scale2m-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv4-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| Resource | resources/libraries/robot/performance.robot
| Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot
| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
-| ... | WITH NAME | dut1_v4
+| ... | WITH NAME | dut1_v4
| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']}
-| ... | WITH NAME | dut2_v4
-# import additional Lisp settings from resource file
+| ... | WITH NAME | dut2_v4
| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
| ... | NIC_Intel-X520-DA2 | IP4FWD | ENCAP | LISP | IP4UNRLAY | IP4OVRLAY
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
| Documentation | *Reference NDR throughput Lisp tunnel verify test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
| | ... | test at 2x 1.9mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 1.9mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
-| | ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
+| | ... | ${dut2_to_tg_ip4} | ${prefix4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc02-1480B-1t1c-ethip4lispip4-ip4base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 740000pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1480
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 740000pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
-| | ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
+| | ... | ${dut2_to_tg_ip4} | ${prefix4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc03-9000B-1t1c-ethip4lispip4-ip4base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 120000pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 120000pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
-| | ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
+| | ... | ${dut2_to_tg_ip4} | ${prefix4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc04-64B-2t2c-ethip4lispip4-ip4base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 3.6mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 3.6mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
-| | ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
+| | ... | ${dut2_to_tg_ip4} | ${prefix4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc05-1480B-2t2c-ethip4lispip4-ip4base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 740000pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1480
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 740000pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
-| | ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
+| | ... | ${dut2_to_tg_ip4} | ${prefix4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc06-9000B-2t2c-ethip4lispip4-ip4base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 120000pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 120000pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
-| | ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
+| | ... | ${dut2_to_tg_ip4} | ${prefix4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc07-64B-4t4c-ethip4lispip4-ip4base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 3.5mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 3.5mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
-| | ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
+| | ... | ${dut2_to_tg_ip4} | ${prefix4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc08-1480B-4t4c-ethip4lispip4-ip4base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 740000pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1480
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 740000pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
-| | ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
+| | ... | ${dut2_to_tg_ip4} | ${prefix4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc09-9000B-4t4c-ethip4lispip4-ip4base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 120000pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 120000pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
-| | ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
+| | ... | ${dut2_to_tg_ip4} | ${prefix4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| Resource | resources/libraries/robot/performance.robot
| Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot
| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
-| ... | WITH NAME | dut1_v4
+| ... | WITH NAME | dut1_v4
| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']}
-| ... | WITH NAME | dut2_v4
-# import additional Lisp settings from resource file
+| ... | WITH NAME | dut2_v4
| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
| ... | NIC_Intel-X520-DA2 | IP4FWD | ENCAP | LISP | IP4UNRLAY | IP4OVRLAY
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-IPv4
+| ...
| Documentation | *RFC6830: Pkt throughput Lisp test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
| ... | *[Ref] Applicable standard specifications:* RFC6830.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
*** Test Cases ***
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1480B-1t1c-ethip4lispip4-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-ethip4lispip4-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-ethip4lispip4-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1480B-2t2c-ethip4lispip4-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-ethip4lispip4-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-ethip4lispip4-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1480B-4t4c-ethip4lispip4-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-ethip4lispip4-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| Resource | resources/libraries/robot/performance.robot
| Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot
| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
-| ... | WITH NAME | dut1_v4
+| ... | WITH NAME | dut1_v4
| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']}
-| ... | WITH NAME | dut2_v4
-# import additional Lisp settings from resource file
+| ... | WITH NAME | dut2_v4
| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
| ... | NIC_Intel-X520-DA2 | IP4FWD | ENCAP | LISP | IP6UNRLAY | IP4OVRLAY
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
| Documentation | *Reference NDR throughput Lisp tunnel verify test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | ... | throughput test at 2x 1.53mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 1.53mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
-| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
-| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
+| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
+| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc02-1460B-1t1c-ethip4lispip6-ip4base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 720000pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1460
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 720000pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
-| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
-| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
+| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
+| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc03-9000B-1t1c-ethip4lispip6-ip4base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 120000pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 120000pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
-| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
-| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
+| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
+| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc04-64B-2t2c-ethip4lispip6-ip4base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 3.25mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 3.25mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
-| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
-| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
+| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
+| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc05-1460B-2t2c-ethip4lispip6-ip4base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 720000pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1460
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 720000pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
-| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
-| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
+| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
+| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc06-9000B-2t2c-ethip4lispip6-ip4base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 120000pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 120000pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
-| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
-| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
+| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
+| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc07-64B-4t4c-ethip4lispip6-ip4base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 3.12mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 3.12mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
-| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
-| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
+| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
+| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc08-1460B-4t4c-ethip4lispip6-ip4base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 720000pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1460
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 720000pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
-| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
-| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
+| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
+| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
| tc09-9000B-4t4c-ethip4lispip6-ip4base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 120000pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 120000pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
-| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
-| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv4
+| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
+| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
+| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| Resource | resources/libraries/robot/performance.robot
| Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot
| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
-| ... | WITH NAME | dut1_v4
+| ... | WITH NAME | dut1_v4
| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']}
-| ... | WITH NAME | dut2_v4
-# import additional Lisp settings from resource file
+| ... | WITH NAME | dut2_v4
| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
| ... | NIC_Intel-X520-DA2 | IP4FWD | ENCAP | LISP | IP6UNRLAY | IP4OVRLAY
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-IPv4
+| ...
| Documentation | *RFC6830: Pkt throughput Lisp test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
| ... | *[Ref] Applicable standard specifications:* RFC6830.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
*** Test Cases ***
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1460B-1t1c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1460B-2t2c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1460B-4t4c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-ethip4lispip6-ip4base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv4
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.QemuUtils
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
| ... | VHOST | VM
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-bridge
-| ... | fail_on_loss=${False}
-| ... | AND | Show Vpp Vhost On All DUTs
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut1}
-| ... | ${dut1_vm_refs}
-| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut2}
-| ... | ${dut2_vm_refs}
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test with vhost and VM with dpdk-testpmd teardown
+| ... | ${min_rate}pps | ${framesize} | 3-node-bridge
+| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
+| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs}
+| ...
| Documentation | *RFC2544: Packet throughput L2BD test cases with VXLANoIPv4
| ... | and vhost*
| ...
| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
| ${vxlan_overhead} | ${50}
-#Socket names
+# Socket names
| ${bd_id1}= | 1
| ${bd_id2}= | 2
| ${sock1}= | /tmp/sock-1-${bd_id1}
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-IMIX-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-IMIX-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10 | ${min_rate}pps | ${framesize}
-| ... | 3-node-bridge | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-bridge
+| ...
| Documentation | *RFC2544: Packet throughput L2BD with VXLANoIPv4 test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | And L2 bridge domain with VXLANoIPv4 initialized in a 3-node circular topology
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-ethip4vxlan-l2bdbasemaclrn-ndrdisc
| | [Documentation]
| | And L2 bridge domain with VXLANoIPv4 initialized in a 3-node circular topology
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-ethip4vxlan-l2bdbasemaclrn-ndrdisc
| | [Documentation]
| | And L2 bridge domain with VXLANoIPv4 initialized in a 3-node circular topology
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-ethip4vxlan-l2bdbasemaclrn-ndrdisc
| | [Documentation]
| | And L2 bridge domain with VXLANoIPv4 initialized in a 3-node circular topology
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-ethip4vxlan-l2bdbasemaclrn-ndrdisc
| | [Documentation]
| | And L2 bridge domain with VXLANoIPv4 initialized in a 3-node circular topology
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-ethip4vxlan-l2bdbasemaclrn-ndrdisc
| | [Documentation]
| | And L2 bridge domain with VXLANoIPv4 initialized in a 3-node circular topology
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-ethip4vxlan-l2bdbasemaclrn-ndrdisc
| | [Documentation]
| | And L2 bridge domain with VXLANoIPv4 initialized in a 3-node circular topology
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-ethip4vxlan-l2bdbasemaclrn-ndrdisc
| | [Documentation]
| | And L2 bridge domain with VXLANoIPv4 initialized in a 3-node circular topology
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-ethip4vxlan-l2bdbasemaclrn-ndrdisc
| | [Documentation]
| | And L2 bridge domain with VXLANoIPv4 initialized in a 3-node circular topology
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
| ... | NIC_Intel-X520-DA2 | L2XCFWD | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
-| Documentation | *Reference NDR throughput L2XC with VXLANoIPv4 verify test cases*
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
+| Documentation | *Reference NDR throughput L2XC with VXLANoIPv4 verify test\
+| ... | cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | with single links between nodes.
| | ... | frames using single trial throughput test at 2x 2.4mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 2.4mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc02-1518B-1t1c-ethip4vxlan-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 787153pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 787153pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc03-9000B-1t1c-ethip4vxlan-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 137816pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 137816pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc04-64B-2t2c-ethip4vxlan-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 5.2mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 5.2mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc05-1518B-2t2c-ethip4vxlan-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 787153pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 787153pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc06-9000B-2t2c-ethip4vxlan-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 137816pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 137816pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc07-64B-4t4c-ethip4vxlan-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 8.4mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 8.4mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc08-1518B-4t4c-ethip4vxlan-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 787153pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 787153pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
| tc09-9000B-4t4c-ethip4vxlan-l2xcbase-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 137816pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 137816pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-xconnect
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-xconnect
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
| ... | NIC_Intel-X520-DA2 | L2XCFWD | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-xconnect
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-bridge
+| ...
| Documentation | *RFC2544: Pkt throughput L2XC with VXLANoIPv4 test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
*** Test Cases ***
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-ethip4vxlan-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-ethip4vxlan-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-ethip4vxlan-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-ethip4vxlan-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-ethip4vxlan-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-ethip4vxlan-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-ethip4vxlan-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-ethip4vxlan-l2xcbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-xconnect
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.Cop
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
-| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | COPWHLIST
+| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | COPWHLIST
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
| Documentation | *Reference NDR throughput IPv6 whitelist verify test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | ... | at 2x 2.8mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 2.8mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv6 forwarding initialized in a 3-node circular topology
-| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 |Â local
-| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 |Â local
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 |Â local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 |Â local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc02-1518B-1t1c-ethip6-ip6base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | at 2x 812743pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv6 forwarding initialized in a 3-node circular topology
-| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 |Â local
-| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 |Â local
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 |Â local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 |Â local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc03-9000B-1t1c-ethip6-ip6base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | at 2x 138580pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv6 forwarding initialized in a 3-node circular topology
-| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 |Â local
-| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 |Â local
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 |Â local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 |Â local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc04-78B-2t2c-ethip6-ip6base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | at 2x 4.9mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 4.9mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv6 forwarding initialized in a 3-node circular topology
-| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 |Â local
-| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 |Â local
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 |Â local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 |Â local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc05-1518B-2t2c-ethip6-ip6base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | at 2x 812743pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv6 forwarding initialized in a 3-node circular topology
-| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 |Â local
-| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 |Â local
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 |Â local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 |Â local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc06-9000B-2t2c-ethip6-ip6base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | at 2x 138580pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv6 forwarding initialized in a 3-node circular topology
-| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 |Â local
-| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 |Â local
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 |Â local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 |Â local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc07-78B-4t4c-ethip6-ip6base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | at 2x 10.1mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 10.1mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv6 forwarding initialized in a 3-node circular topology
-| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 |Â local
-| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 |Â local
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 |Â local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 |Â local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc08-1518B-4t4c-ethip6-ip6base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | at 2x 812743pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv6 forwarding initialized in a 3-node circular topology
-| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 |Â local
-| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 |Â local
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 |Â local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 |Â local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc09-9000B-4t4c-ethip6-ip6base-copwhtlistbase-ndrchk
| | [Documentation]
| | ... | at 2x 138580pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | When IPv6 forwarding initialized in a 3-node circular topology
-| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 |Â local
-| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 |Â local
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
-| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
-| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 |Â local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 |Â local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.Cop
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | COPWHLIST
+| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | COPWHLIST
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-IPv6
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-IPv6
+| ...
| Documentation | *RFC2544: Pkt throughput IPv6 whitelist test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
*** Test Cases ***
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-ethip6-ip6base-copwhtlistbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-ethip6-ip6base-copwhtlistbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-78B-2t2c-ethip6-ip6base-copwhtlistbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-ethip6-ip6base-copwhtlistbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-ethip6-ip6base-copwhtlistbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-78B-4t4c-ethip6-ip6base-copwhtlistbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-ethip6-ip6base-copwhtlistbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-ethip6-ip6base-copwhtlistbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.Classify.Classify
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
-| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | IACLDST
+| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | IACLDST
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
| Documentation | *Reference NDR throughput IPv6 whitelist verify test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | ... | at 2x 2.9mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 2.9mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv6 forwarding initialized in a 3-node circular topology
-| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc02-1518B-1t1c-ethip6-ip6base-iacldstbase-ndrchk
| | [Documentation]
| | ... | at 2x 812743pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv6 forwarding initialized in a 3-node circular topology
-| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc03-9000B-1t1c-ethip6-ip6base-iacldstbase-ndrchk
| | [Documentation]
| | ... | at 2x 138580pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv6 forwarding initialized in a 3-node circular topology
-| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc04-78B-2t2c-ethip6-ip6base-iacldstbase-ndrchk
| | [Documentation]
| | ... | at 2x 5.4mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 5.4mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv6 forwarding initialized in a 3-node circular topology
-| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc05-1518B-2t2c-ethip6-ip6base-iacldstbase-ndrchk
| | [Documentation]
| | ... | at 2x 812743pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv6 forwarding initialized in a 3-node circular topology
-| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc06-9000B-2t2c-ethip6-ip6base-iacldstbase-ndrchk
| | [Documentation]
| | ... | at 2x 138580pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv6 forwarding initialized in a 3-node circular topology
-| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc07-78B-4t4c-ethip6-ip6base-iacldstbase-ndrchk
| | [Documentation]
| | ... | at 2x 9.5mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 9.5mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv6 forwarding initialized in a 3-node circular topology
-| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc08-1518B-4t4c-ethip6-ip6base-iacldstbase-ndrchk
| | [Documentation]
| | ... | at 2x 812743pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv6 forwarding initialized in a 3-node circular topology
-| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc09-9000B-4t4c-ethip6-ip6base-iacldstbase-ndrchk
| | [Documentation]
| | ... | at 2x 138580pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv6 forwarding initialized in a 3-node circular topology
-| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.Classify.Classify
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | IACLDST
+| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | IACLDST
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-IPv6
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-IPv6
+| ...
| Documentation | *RFC2544: Pkt throughput IPv6 iAcl whitelist test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
*** Test Cases ***
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-ethip6-ip6base-iacldstbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-ethip6-ip6base-iacldstbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-78B-2t2c-ethip6-ip6base-iacldstbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-ethip6-ip6base-iacldstbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-ethip6-ip6base-iacldstbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-78B-4t4c-ethip6-ip6base-iacldstbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-ethip6-ip6base-iacldstbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-ethip6-ip6base-iacldstbase-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
-| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | BASE
+| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | BASE
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
| Documentation | *Reference NDR throughput IPv6 routing verify test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | ... | frames using single trial throughput test at 2x 2.9mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 2.9mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc02-1518B-1t1c-ethip6-ip6base-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc03-9000B-1t1c-ethip6-ip6base-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc04-78B-2t2c-ethip6-ip6base-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 5.9mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 5.9mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc05-1518B-2t2c-ethip6-ip6base-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc06-9000B-2t2c-ethip6-ip6base-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc07-78B-4t4c-ethip6-ip6base-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 7.3mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 7.3mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc08-1518B-4t4c-ethip6-ip6base-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc09-9000B-4t4c-ethip6-ip6base-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And IPv6 forwarding initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | BASE
+| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | BASE
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-IPv6
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-IPv6
+| ...
| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
*** Test Cases ***
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-ethip6-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-ethip6-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-78B-2t2c-ethip6-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-ethip6-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-ethip6-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-78B-4t4c-ethip6-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-ethip6-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-ethip6-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | SCALE | FIB_200K
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
| Documentation | *Reference NDR throughput IPv6 routing verify test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | ... | frames using single trial throughput test at 2x 2.3mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 2.3mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc02-1518B-1t1c-ethip6-ip6scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc03-9000B-1t1c-ethip6-ip6scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc04-78B-2t2c-ethip6-ip6scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 4.8mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 4.8mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc05-1518B-2t2c-ethip6-ip6scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc06-9000B-2t2c-ethip6-ip6scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc07-78B-4t4c-ethip6-ip6scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 7.7mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 7.7mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc08-1518B-4t4c-ethip6-ip6scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc09-9000B-4t4c-ethip6-ip6scale200k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | SCALE | FIB_200K
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-IPv6-dst-${rts_per_flow}
+| ...
| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
| ${rts_per_flow}= | ${100000}
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-ethip6-ip6scale200k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-ethip6-ip6scale200k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-78B-2t2c-ethip6-ip6scale200k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-ethip6-ip6scale200k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-ethip6-ip6scale200k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-78B-4t4c-ethip6-ip6scale200k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-ethip6-ip6scale200k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-ethip6-ip6scale200k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | SCALE | FIB_20K
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
| Documentation | *Reference NDR throughput IPv6 routing verify test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | ... | frames using single trial throughput test at 2x 2.9mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 2.9mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc02-1518B-1t1c-ethip6-ip6scale20k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc03-9000B-1t1c-ethip6-ip6scale20k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc04-78B-2t2c-ethip6-ip6scale20k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 5.9mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 5.9mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc05-1518B-2t2c-ethip6-ip6scale20k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc06-9000B-2t2c-ethip6-ip6scale20k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc07-78B-4t4c-ethip6-ip6scale20k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 10.0mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 10.0mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc08-1518B-4t4c-ethip6-ip6scale20k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc09-9000B-4t4c-ethip6-ip6scale20k-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | SCALE | FIB_20K
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-IPv6-dst-${rts_per_flow}
+| ...
| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
| ${rts_per_flow}= | ${10000}
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-ethip6-ip6scale20k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-ethip6-ip6scale20k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-78B-2t2c-ethip6-ip6scale20k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-ethip6-ip6scale20k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-ethip6-ip6scale20k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-78B-4t4c-ethip6-ip6scale20k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-ethip6-ip6scale20k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-ethip6-ip6scale20k-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | SCALE | FIB_2M
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
| Documentation | *Reference NDR throughput IPv6 routing verify test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | ... | frames using single trial throughput test at 2x 1.8mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 1.8mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc02-1518B-1t1c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc03-9000B-1t1c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc04-78B-2t2c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 4.0mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 4.0mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc05-1518B-2t2c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc06-9000B-2t2c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc07-78B-4t4c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 6.8mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 6.8mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc08-1518B-4t4c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 812743pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 812743pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
| tc09-9000B-4t4c-ethip6-ip6scale2m-ndrchk
| | [Documentation]
| | ... | frames using single trial throughput test at 2x 138580pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 138580pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${rts_per_flow}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize}
-| | ... | 3-node-IPv6-dst-${rts_per_flow}
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${rts_per_flow}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | SCALE | FIB_2M
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-IPv6-dst-${rts_per_flow}
+| ...
| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
| ${rts_per_flow}= | ${1000000}
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-ethip6-ip6scale2m-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-ethip6-ip6scale2m-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-78B-2t2c-ethip6-ip6scale2m-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-ethip6-ip6scale2m-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-ethip6-ip6scale2m-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-78B-4t4c-ethip6-ip6scale2m-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-ethip6-ip6scale2m-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-ethip6-ip6scale2m-ndrdisc
| | [Documentation]
| | ... | 3-node-IPv6-dst-${rts_per_flow}
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| Resource | resources/libraries/robot/performance.robot
| Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot
| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
-| ... | WITH NAME | dut1_v4
+| ... | WITH NAME | dut1_v4
| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']}
-| ... | WITH NAME | dut2_v4
-# import additional Lisp settings from resource file
+| ... | WITH NAME | dut2_v4
| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
| ... | NIC_Intel-X520-DA2 | IP6FWD | ENCAP | LISP | IP4UNRLAY | IP6OVRLAY
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
| Documentation | *Reference NDR throughput Lisp tunnel verify test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | ... | throughput test at 2x 1.75mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 1.75mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
-| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
-| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
+| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
+| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc02-1460B-1t1c-ethip6lispip4-ip6base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 720000pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1460
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 720000pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
-| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
-| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
+| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
+| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc03-9000B-1t1c-ethip6lispip4-ip6base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 120000pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 120000pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
-| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
-| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
+| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
+| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc04-78B-2t2c-ethip6lispip4-ip6base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 3.42mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 3.42mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
-| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
-| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
+| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
+| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc05-1460B-2t2c-ethip6lispip4-ip6base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 720000pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1460
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 720000pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
-| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
-| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
+| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
+| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc06-9000B-2t2c-ethip6lispip4-ip6base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 120000pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 120000pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
-| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
-| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
+| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
+| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc07-78B-4t4c-ethip6lispip4-ip6base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 3.42mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 3.42mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
-| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
-| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
+| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
+| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc08-1460B-4t4c-ethip6lispip4-ip6base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 720000pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1460
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 720000pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
-| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
-| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
+| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
+| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc09-9000B-4t4c-ethip6lispip4-ip6base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 120000pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 120000pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
-| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
-| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
+| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
+| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| Resource | resources/libraries/robot/performance.robot
| Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot
| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
-| ... | WITH NAME | dut1_v4
+| ... | WITH NAME | dut1_v4
| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']}
-| ... | WITH NAME | dut2_v4
-# import additional Lisp settings from resource file
+| ... | WITH NAME | dut2_v4
| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
| ... | NIC_Intel-X520-DA2 | IP6FWD | ENCAP | LISP | IP4UNRLAY | IP6OVRLAY
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-IPv6
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-IPv6
+| ...
| Documentation | *RFC6830: Pkt throughput Lisp test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
| ... | *[Ref] Applicable standard specifications:* RFC6830.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
*** Test Cases ***
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1460B-1t1c-ethip6lispip4-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-ethip6lispip4-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-78B-2t2c-ethip6lispip4-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1460B-2t2c-ethip6lispip4-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-ethip6lispip4-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-78B-4t4c-ethip6lispip4-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1460B-4t4c-ethip6lispip4-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-ethip6lispip4-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot
-# import additional Lisp settings from resource file
| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
| ... | NIC_Intel-X520-DA2 | IP6FWD | ENCAP | LISP | IP6UNRLAY | IP6OVRLAY
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
| Documentation | *Reference NDR throughput Lisp tunnel verify test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
| | ... | throughput test at 2x 1.56mpps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 1.56mpps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
-| | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
-| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
+| | ... | ${dut2_to_tg_ip6} | ${prefix6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
+| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc02-1460B-1t1c-ethip6lispip6-ip6base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 740000pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 1460
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 740000pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
-| | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
-| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
+| | ... | ${dut2_to_tg_ip6} | ${prefix6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
+| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc03-9000B-1t1c-ethip6lispip6-ip6base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 120000pps.
| | [Tags] | 1T1C | STHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 120000pps
| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
-| | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
-| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
+| | ... | ${dut2_to_tg_ip6} | ${prefix6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
+| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc04-78B-2t2c-ethip6lispip6-ip6base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 3.2mpps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 3.2mpps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
-| | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
-| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
+| | ... | ${dut2_to_tg_ip6} | ${prefix6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
+| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc05-1460B-2t2c-ethip6lispip6-ip6base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 740000pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 1460
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 740000pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
-| | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
-| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
+| | ... | ${dut2_to_tg_ip6} | ${prefix6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
+| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc06-9000B-2t2c-ethip6lispip6-ip6base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 120000pps.
| | [Tags] | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 120000pps
| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
-| | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
-| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
+| | ... | ${dut2_to_tg_ip6} | ${prefix6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
+| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc07-78B-4t4c-ethip6lispip6-ip6base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 3.2mpps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 78
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 3.2mpps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
-| | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
-| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
+| | ... | ${dut2_to_tg_ip6} | ${prefix6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
+| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc08-1460B-4t4c-ethip6lispip6-ip6base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 740000pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 1460
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 740000pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
-| | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
-| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
+| | ... | ${dut2_to_tg_ip6} | ${prefix6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
+| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
| tc09-9000B-4t4c-ethip6lispip6-ip6base-ndrchk
| | [Documentation]
| | ... | throughput test at 2x 120000pps.
| | [Tags] | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
| | ${rate}= | Set Variable | 120000pps
| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
-| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
-| | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
-| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6
+| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
+| | ... | ${dut2_to_tg_ip6} | ${prefix6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
+| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot
-# import additional Lisp settings from resource file
| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
| ... | NIC_Intel-X520-DA2 | IP6FWD | ENCAP | LISP | IP6UNRLAY | IP6OVRLAY
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-X520-DA2
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-IPv6
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-IPv6
+| ...
| Documentation | *RFC6830: Pkt throughput Lisp test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
| ... | *[Ref] Applicable standard specifications:* RFC6830.
*** Variables ***
-#X520-DA2 bandwidth limit
+# X520-DA2 bandwidth limit
| ${s_limit} | ${10000000000}
*** Test Cases ***
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1460B-1t1c-ethip6lispip6-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-9000B-1t1c-ethip6lispip6-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-78B-2t2c-ethip6lispip6-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1460B-2t2c-ethip6lispip6-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-9000B-2t2c-ethip6lispip6-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-78B-4t4c-ethip6lispip6-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1460B-4t4c-ethip6lispip6-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-9000B-4t4c-ethip6lispip6-ip6base-ndrdisc
| | [Documentation]
| | ... | ${binary_max} | 3-node-IPv6
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| | ... | ${glob_loss_acceptance}
-| | ... | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.QemuUtils
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM
+| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Intel-X710
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-bridge
-| ... | fail_on_loss=${False}
-| ... | AND | Show Vpp Vhost On All DUTs
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut1}
-| ... | ${dut1_vm_refs}
-| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut2}
-| ... | ${dut2_vm_refs}
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test with vhost and VM with dpdk-testpmd teardown
+| ... | ${min_rate}pps | ${framesize} | 3-node-bridge
+| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
+| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs}
+| ...
| Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Intel-X710
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-bridge
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-bridge
+| ...
| Documentation | *RFC2544: Pkt throughput L2BD test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-#X710 bandwidth limit
+# X710 bandwidth limit
| ${s_limit} | ${10000000000}
*** Keywords ***
| | Find PDR using binary search and pps
| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
*** Test Cases ***
| tc01-64B-1t1c-eth-l2bdbasemaclrn-ndrdisc
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.NodePath
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Cisco-VIC-1385 | ETH | L2BDMACLRN | BASE
+| ... | NIC_Cisco-VIC-1385 | ETH | L2BDMACLRN | BASE
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Cisco-VIC-1385
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-bridge
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-bridge
+| ...
| Documentation | *RFC2544: Pkt throughput L2BD test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | And L2 bridge domain initialized in a 3-node circular topology
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-eth-l2bdbasemaclrn-ndrdisc
| | [Documentation]
| | And L2 bridge domain initialized in a 3-node circular topology
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-eth-l2bdbasemaclrn-ndrdisc
| | [Documentation]
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.QemuUtils
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-XL710 | ETH | L2BDMACLRN | BASE | VHOST | VM
+| ... | NIC_Intel-XL710 | ETH | L2BDMACLRN | BASE | VHOST | VM
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Intel-XL710
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-bridge
-| ... | fail_on_loss=${False}
-| ... | AND | Show Vpp Vhost On All DUTs
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut1}
-| ... | ${dut1_vm_refs}
-| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut2}
-| ... | ${dut2_vm_refs}
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test with vhost and VM with dpdk-testpmd teardown
+| ... | ${min_rate}pps | ${framesize} | 3-node-bridge
+| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
+| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs}
+| ...
| Documentation | *RFC2544: Packet throughput L2BD test cases with vhost*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc03-1518B-1t1c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc05-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc07-64B-2t2c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc09-1518B-2t2c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc11-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc13-64B-4t4c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc15-1518B-4t4c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
| tc17-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
| | [Documentation]
| | And Setup scheduler policy for VPP on all DUTs
| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
| | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate}
-| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${threshold} | ${perf_pdr_loss_acceptance}
+| | ... | ${perf_pdr_loss_acceptance_type}
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.NodePath
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-XL710 | ETH | L2BDMACLRN | BASE
+| ... | NIC_Intel-XL710 | ETH | L2BDMACLRN | BASE
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Intel-XL710
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-bridge
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-bridge
+| ...
| Documentation | *RFC2544: Pkt throughput L2BD test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-#XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
+# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
| ${s_24.5G} | ${24500000000}
-#XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
+# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
| ${s_18.75Mpps} | ${18750000}
*** Keywords ***
| | Find PDR using binary search and pps
| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
| L2 Bridge Domain PDR Binary Search
| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${s_limit}
| | Find PDR using binary search and pps
| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge
| | ... | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
*** Test Cases ***
| tc01-64B-1t1c-eth-l2bdbasemaclrn-ndrdisc
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| Resource | resources/libraries/robot/performance.robot
| Library | resources.libraries.python.InterfaceUtil
| Library | resources.libraries.python.NodePath
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-XL710 | ETH | L2XCFWD | BASE
+| ... | NIC_Intel-XL710 | ETH | L2XCFWD | BASE
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L2 | Intel-XL710
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-xconnect
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-xconnect
+| ...
| Documentation | *RFC2544: Pkt throughput L2XC test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-#XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
+# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
| ${s_24.5G} | ${24500000000}
-#XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
+# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
| ${s_18.75Mpps} | ${18750000}
*** Test Cases ***
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| Library | resources.libraries.python.topology.Topology
| Library | resources.libraries.python.NodePath
| Library | resources.libraries.python.InterfaceUtil
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
+| ... | WITH NAME | dut1_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']}
+| ... | WITH NAME | dut2_v4
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-XL710 | ETH | IP4FWD | BASE
+| ... | NIC_Intel-XL710 | ETH | IP4FWD | BASE
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-XL710
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-IPv4
+| ...
| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-#XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
+# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
| ${s_24.5G} | ${24500000000}
-#XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
+# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
| ${s_18.75Mpps} | ${18750000}
*** Test Cases ***
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/performance.robot
+| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-XL710 | ETH | IP6FWD | BASE
+| ... | NIC_Intel-XL710 | ETH | IP6FWD | BASE
+| ...
| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
| ... | L3 | Intel-XL710
| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ... | Run Keyword If Test Failed
-| ... | Traffic should pass with no loss | 10
-| ... | ${min_rate}pps | ${framesize} | 3-node-IPv6
-| ... | fail_on_loss=${False}
-| ... | AND | Remove startup configuration of VPP from all DUTs
-| ... | AND | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| ... | 3-node-IPv6
+| ...
| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-#XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
+# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
| ${s_24.5G} | ${24500000000}
-#XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
+# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
| ${s_18.75Mpps} | ${18750000}
*** Test Cases ***
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| Resource | resources/libraries/robot/interfaces.robot
| Library | resources.libraries.python.SetupFramework
| Library | resources.libraries.python.CpuUtils
-| Suite Setup | Run Keywords | Setup Framework | ${nodes}
+| Suite Setup | Run Keywords | Setup performance global Variables
+| ... | AND | Setup Framework | ${nodes}
| ... | AND | Setup All DUTs | ${nodes}
| ... | AND | Get CPU Layout from all nodes | ${nodes}
| ... | AND | Update All Interface Data On All Nodes
| ... | ${nodes} | skip_tg=${True} | numa_node=${True}
+
+*** Keywords ***
+| Setup performance global Variables
+| | [Documentation]
+| | ... | Setup suite Variables. Variables are used across performance testing.
+| | ...
+| | ... | _NOTE:_ This KW sets following suite variables:
+| | ... | - perf_trial_duration - Duration of traffic run [s].
+| | ... | - perf_pdr_loss_acceptance - Loss acceptance treshold
+| | ... | - perf_pdr_loss_acceptance_type - Loss acceptance treshold type
+| | ... | - perf_vm_image - Guest VM disk image
+| | ...
+| | Set Global Variable | ${perf_trial_duration} | 10
+| | Set Global Variable | ${perf_pdr_loss_acceptance} | 0.5
+| | Set Global Variable | ${perf_pdr_loss_acceptance_type} | percentage
+| | Set Global Variable | ${perf_vm_image} | /var/lib/vm/csit-nested-1.6.img