Add Honeycomb interface management tests (ipv4, ipv6, ethernet, routing)

 - add test cases for managing ipv4, ipv6, ethernet and routing
 configuration on VPP interface
 - add keywords used in these tests to set and verify configuration
 - add method and vat template for dumping an interface's
configured IP addresses
 - add method for converting between ipv4 netmasks and
   network prefixes
 - clean up documentation of older Honeycomb keywords

Note: Test cases are tagged with a placeholder tag to allow manual
test runs locally. It should be replaced with the appropriate
environment tags once Honeycomb service is deployed on virl.

Change-Id: I99ce1e72c8550f520f8c35ef4a93eaebb530db78
Signed-off-by: selias <samelias@cisco.com>
Signed-off-by: Matej Klotton <mklotton@cisco.com>

diff --git a/resources/libraries/python/IPUtil.py b/resources/libraries/python/IPUtil.py
index 8ad01c4..00a7000 100644 (file)
--- a/resources/libraries/python/IPUtil.py
+++ b/resources/libraries/python/IPUtil.py
@@ -12,6 +12,7 @@
 # limitations under the License.
 
 """Common IP utilities library."""
+from ipaddress import IPv4Network
 
 from resources.libraries.python.ssh import SSH
 from resources.libraries.python.constants import Constants
@@ -40,3 +41,21 @@ class IPUtil(object):
         if int(ret_code) != 0:
             raise Exception('VPP ip probe {dev} {ip} failed on {h}'.format(
                 dev=interface, ip=addr, h=node['host']))
+
+
+def convert_ipv4_netmask_prefix(netmask):
+    """Convert network mask to equivalent network prefix length or vice versa.
+
+    Example: mask 255.255.0.0 -> prefix length 16
+    :param netmask: network mask or network prefix length.
+    :type netmask: str or int
+    :return: network mask or network prefix length.
+    :rtype: str or int
+    """
+    temp_address = "0.0.0.0"
+    net = IPv4Network(u"{0}/{1}".format(temp_address, netmask), False)
+
+    if isinstance(netmask, int):
+        return net.netmask
+    elif isinstance(netmask, basestring):
+        return net.prefixlen

diff --git a/resources/libraries/python/InterfaceUtil.py b/resources/libraries/python/InterfaceUtil.py
index 021e8ed..ec2ef69 100644 (file)
--- a/resources/libraries/python/InterfaceUtil.py
+++ b/resources/libraries/python/InterfaceUtil.py
@@ -18,6 +18,7 @@ from time import time, sleep
 from robot.api import logger
 
 from resources.libraries.python.ssh import SSH
+from resources.libraries.python.IPUtil import convert_ipv4_netmask_prefix
 from resources.libraries.python.ssh import exec_cmd_no_error
 from resources.libraries.python.topology import NodeType, Topology
 from resources.libraries.python.VatExecutor import VatExecutor, VatTerminal
@@ -200,6 +201,36 @@ class InterfaceUtil(object):
 
         return data
 
+    @staticmethod
+    def vpp_get_interface_ip_addresses(node, interface, ip_version):
+        """Get list of IP addresses from an interface on a VPP node.
+
+         :param node: VPP node to get data from.
+         :param interface: Name of an interface on the VPP node.
+         :param ip_version: IP protocol version (ipv4 or ipv6).
+         :type node: dict
+         :type interface: str
+         :type ip_version: str
+         :return: List of dictionaries, each containing IP address, subnet
+         prefix length and also the subnet mask for ipv4 addresses.
+         Note: A single interface may have multiple IP addresses assigned.
+         :rtype: list
+        """
+        sw_if_index = Topology.get_interface_sw_index(node, interface)
+
+        with VatTerminal(node) as vat:
+            response = vat.vat_terminal_exec_cmd_from_template(
+                "ip_address_dump.vat", ip_version=ip_version,
+                sw_if_index=sw_if_index)
+
+        data = response[0]
+
+        if ip_version == "ipv4":
+            for item in data:
+                item["netmask"] = convert_ipv4_netmask_prefix(
+                    item["prefix_length"])
+        return data
+
     @staticmethod
     def tg_set_interface_driver(node, pci_addr, driver):
         """Set interface driver on the TG node.

diff --git a/resources/libraries/robot/honeycomb/honeycomb.robot b/resources/libraries/robot/honeycomb/honeycomb.robot
index 7418078..54aff2f 100644 (file)
--- a/resources/libraries/robot/honeycomb/honeycomb.robot
+++ b/resources/libraries/robot/honeycomb/honeycomb.robot
@@ -18,7 +18,7 @@
 
 *** Keywords ***
 | Setup Honeycomb service on DUTs
-| | [Documentation] | *Setup environment for honeycomb testing*
+| | [Documentation] | *Setup environment for honeycomb testing.*
 | | ...
 | | ... | _Setup steps:_
 | | ... | - 1. Login to each honeycomb node using ssh
@@ -28,10 +28,12 @@
 | | ... | connection refused -> 404 -> 401 -> 503 or 500 -> 200 (pass)
 | | ... | - 4. Configure honeycomb nodes using HTTP PUT request
 | | ...
+| | ... | _Arguments:_
+| | ... | - ${duts} - list of nodes to setup Honeycomb on
+| | ...
 | | ... | _Used global constants and variables:_
 | | ... | - RESOURCES_TPL_HC - path to honeycomb templates directory
 | | ... | - HTTPCodes - HTTP protocol status codes
-| | ... | - ${nodes} - dictionary of all nodes in topology.YAML file
 | | ...
 | | [Arguments] | @{duts}
 | | Start honeycomb on DUTs | @{duts}
@@ -39,7 +41,7 @@
 | | ... | Check honeycomb startup state | @{duts}
 
 | Stop honeycomb service on DUTs
-| | [Documentation] | *Cleanup environment after honeycomb testing*
+| | [Documentation] | *Cleanup environment after honeycomb testing.*
 | | ...
 | | ... | _Teardown steps:_
 | | ... | - 1. Login to each honeycomb node using ssh
@@ -48,10 +50,12 @@
 | | ... | Expected sequence of HTTP replies:
 | | ... | 200 -> 404 -> connection refused (pass)
 | | ...
+| | ... | _Arguments:_
+| | ... | - ${duts} - list of nodes to stop Honeycomb on
+| | ...
 | | ... | _Used global constants and variables:_
 | | ... | - RESOURCES_TPL_HC - path to honeycomb templates directory
 | | ... | - HTTPCodes - HTTP protocol status codes
-| | ... | - ${nodes} - dictionary of all nodes in topology.YAML file
 | | ...
 | | [Arguments] | @{duts}
 | | Stop honeycomb on DUTs | @{duts}

diff --git a/resources/libraries/robot/honeycomb/interfaces.robot b/resources/libraries/robot/honeycomb/interfaces.robot
index 338c3cf..0768fd3 100644 (file)
--- a/resources/libraries/robot/honeycomb/interfaces.robot
+++ b/resources/libraries/robot/honeycomb/interfaces.robot
@@ -14,63 +14,307 @@
 *** Settings ***
 | Library | resources/libraries/python/HoneycombUtil.py
 | Library | resources.libraries.python.InterfaceUtil
-| ... | WITH NAME | InterfaceCLI
-| Library | resources.libraries.python.HoneycombAPIKeywords.InterfaceKeywords
-| ... | WITH NAME | interfaceAPI
+| ... | WITH NAME | interfaceCLI
+| Library | resources.libraries.python.HcAPIKwInterfaces.InterfaceKeywords
+| ... | WITH NAME | InterfaceAPI
 
 *** Keywords ***
-| Honeycomb sets interface state
+| Interface state is
+| | [Documentation] | Uses VPP binary API to ensure that the interface under\
+| | ... | test is in the specified admin state.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface on the specified node. Type: string
+| | ... | - state - state to set on interface. Type:string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Interface state is \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \
+| | ... | \| up \|
 | | [Arguments] | ${node} | ${interface} | ${state}
-| | [Documentation] | Uses Honeycomb API to change the admin state
+| | interfaceCLI.Set interface state | ${node} | ${interface} | ${state}
+
+| Honeycomb sets interface state
+| | [Documentation] | Uses Honeycomb API to change the admin state\
 | | ... | of the specified interface.
 | | ...
 | | ... | *Arguments:*
-| | ... | - state - state to set on interface
-| | ... | - node - dictionary of information about a DUT node
-| | ... | - interface - name of an interface on the specified node
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface on the specified node. Type: string
+| | ... | - state - state to set on interface. Type:string
 | | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb sets interface state \| ${nodes['DUT1']} \
+| | ... | \| GigabitEthernet0/8/0 \| up \|
+| | [Arguments] | ${node} | ${interface} | ${state}
 | | interfaceAPI.Set interface state | ${node} | ${interface} | ${state}
 
 | Interface state from Honeycomb should be
-| | [Arguments] | ${node} | ${interface} | ${state}
-| | [Documentation] | Retrieves interface admin state through Honeycomb and
-| | ... | compares with state supplied in argument
+| | [Documentation] | Retrieves interface admin state through Honeycomb and\
+| | ... | compares with state supplied in argument.
 | | ...
 | | ... | *Arguments:*
-| | ... | - state - expected interface state
-| | ... | - node - dictionary of information about a DUT node
-| | ... | - interface - name of an interface on the specified node
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface on the specified node. Type: string
+| | ... | - state - expected interface state. Type: string
+| | ...
+| | ... | *Example:*
 | | ...
-| | ${api_data}= | interfaceAPI.Get interface oper info | ${node} | ${interface}
+| | ... | \| Interface state from Honeycomb should be \| ${nodes['DUT1']} \
+| | ... | \| GigabitEthernet0/8/0 \| up \|
+| | [Arguments] | ${node} | ${interface} | ${state}
+| | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface}
 | | ${api_state}= | Set Variable | ${api_data['admin-status']}
 | | Should be equal | ${api_state} | ${state}
 
 | Interface state from VAT should be
-| | [Arguments] | ${node} | ${interface} | ${state}
-| | [Documentation] | Retrieves interface admin state through VAT and compares
-| | ... | with state supplied in argument
+| | [Documentation] | Retrieves interface admin state through VAT and compares\
+| | ... | with state supplied in argument.
 | | ...
 | | ... | *Arguments:*
-| | ... | - state - expected interface state
-| | ... | - node - dictionary of information about a DUT node
-| | ... | - interface - name of an interface on the specified node
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface on the specified node. Type: string
+| | ... | - state - expected interface state. Type: string
 | | ...
 | | ... | _NOTE:_ Vat returns state as int (1/0) instead of string (up/down).
 | | ... | This keyword also handles translation.
 | | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Interface state from VAT should be \| ${nodes['DUT1']} \
+| | ... | \| GigabitEthernet0/8/0 \| up \|
+| | [Arguments] | ${node} | ${interface} | ${state}
 | | ${vat_data}= | InterfaceCLI.VPP get interface data | ${node} | ${interface}
 | | ${vat_state}= | Set Variable if
 | | ... | ${vat_data['admin_up_down']} == 1 | up | down
 | | Should be equal | ${vat_state} | ${state}
 
-| Interface state is
-| | [Arguments] | ${node} | ${interface} | ${state}
-| | [Documentation] | Uses VPP binary API to ensure that the interface under
-| | ... | test is in the specified admin state.
+| Honeycomb sets interface ipv4 configuration
+| | [Documentation] | Uses Honeycomb API to change ipv4 configuration\
+| | ... | of the specified interface.
 | | ...
 | | ... | *Arguments:*
-| | ... | - state - state to set on interface
-| | ... | - node - dictionary of information about a DUT node
-| | ... | - interface - name of an interface on the specified node
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface on the specified node. Type: string
+| | ... | - address - IP address to set. Type: string
+| | ... | - netmask - subnet mask to set. Type: string
+| | ... | - fib_address - IP address to add to fib table. Type: string
+| | ... | - fib_mac - MAC address to add to fib table. Type: string
+| | ... | - settings - ipv4 interface settings. Type: dictionary
 | | ...
-| | interfaceAPI.Set interface state | ${node} | ${interface} | ${state}
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb sets interface ipv4 configuration \| ${nodes['DUT1']} \
+| | ... | \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 255.255.255.0 \
+| | ... | \| 192.168.0.3 \| 08:00:27:c0:5d:37 \
+| | ... | \| ${{'enabled': True, 'mtu': 1500}} \|
+| | [Arguments] | ${node} | ${interface} | ${address} | ${netmask}
+| | ... | ${fib_address} | ${fib_mac} | ${settings}
+| | interfaceAPI.Add first ipv4 address
+| | ... | ${node} | ${interface} | ${address} | ${netmask}
+| | interfaceAPI.Add first ipv4 neighbor
+| | ... | ${node} | ${interface} | ${fib_address} | ${fib_mac}
+| | :FOR | ${key} | IN | @{settings.keys()}
+| | | interfaceAPI.Configure interface ipv4
+| | | ... | ${node} | ${interface} | ${key} | ${settings['${key}']}
+
+| IPv4 config from Honeycomb should be
+| | [Documentation] | Retrieves interface ipv4 configuration through Honeycomb\
+| | ... | and compares with state supplied in argument.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface on the specified node. Type: string
+| | ... | - address - IP address to expect. Type: string
+| | ... | - netmask - subnet mask to expect. Type: string
+| | ... | - fib_address - IP address to expect in fib table. Type: string
+| | ... | - fib_mac - MAC address to expect in fib table. Type: string
+| | ... | - settings - ipv4 interface settings to expect. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| IPv4 config from Honeycomb should be \| ${nodes['DUT1']} \
+| | ... | \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 255.255.255.0 \
+| | ... | \| 192.168.0.3 \| 08:00:27:c0:5d:37 \
+| | ... | \| ${{'enabled': True, 'mtu': 1500}} \|
+| | [Arguments] | ${node} | ${interface} | ${address} | ${netmask}
+| | ... | ${fib_address} | ${fib_mac} | ${settings}
+| | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface}
+| | Should be equal | ${address}
+| | ... | ${api_data['ietf-ip:ipv4']['address'][0]['ip']}
+| | Should be equal | ${netmask}
+| | ... | ${api_data['ietf-ip:ipv4']['address'][0]['netmask']}
+| | Should be equal | ${fib_address}
+| | ... | ${api_data['ietf-ip:ipv4']['neighbor'][0]['ip']
+| | Should be equal | ${fib_mac}
+| | ... | ${api_data['ietf-ip:ipv4']['neighbor'][0]['link-layer-address']
+| | :FOR | ${key} | IN | @{settings.keys()}
+| | | Should be equal
+| | | ... | ${settings['{key']} | ${api_data['ietf-ip:ipv4']['{$key}']}
+
+| IPv4 config from VAT should be
+| | [Documentation] | Retrieves interface ipv4 configuration through VAT and\
+| | ... | compares with state supplied in argument.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface on the specified node. Type: string
+| | ... | - address - IP address to expect. Type: string
+| | ... | - netmask - subnet mask to expect. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| IPv4 config from VAT should be \| ${nodes['DUT1']} \
+| | ... | \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 255.255.255.0 \|
+| | [Arguments] | ${node} | ${interface} | ${address} | ${netmask}
+| | ${vpp_data}= | interfaceCLI.VPP get interface ip addresses
+| | ... | ${node} | ${interface} | ipv4
+| | Should be equal | ${vpp_data[0]['ip']} | ${address}
+| | Should be equal | ${vpp_data[0]['netmask']} | ${netmask}
+
+| Honeycomb sets interface ipv6 configuration
+| | [Documentation] | Uses Honeycomb API to change ipv6 configuration\
+| | ... | of the specified interface.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface on the specified node. Type: string
+| | ... | - address - IP address to set. Type: string
+| | ... | - prefix - length of subnet prefix to set. Type: string
+| | ... | - fib_address - IP address to add to fib table. Type: string
+| | ... | - fib_mac - MAC address to add to fib table. Type: string
+| | ... | - settings - ipv6 interface settings. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb sets interface ipv6 configuration \| ${nodes['DUT1']} \
+| | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 64 \
+| | ... | \| 10::11 \| 08:00:27:c0:5d:37 \| ${{'enabled': True, 'mtu': 1500}} \|
+| | [Arguments] | ${node} | ${interface} | ${address} | ${prefix}
+| | ... | ${fib_address} | ${fib_mac} | ${settings}
+| | interfaceAPI.Add first ipv6 address
+| | ... | ${node} | ${interface} | ${address} | ${prefix}
+| | interfaceAPI.Add first ipv6 neighbor
+| | ... | ${node} | ${interface} | ${fib_address} | ${fib_mac}
+| | :FOR | ${key} | IN | @{settings.keys()}
+| | | interfaceAPI.Configure interface ipv6
+| | | ... | ${node} | ${interface} | ${key} | ${settings['${key}']}
+
+| IPv6 config from Honeycomb should be
+| | [Documentation] | Retrieves interface ipv6 configuration through Honeycomb\
+| | ... | and compares with state supplied in argument.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface on the specified node. Type: string
+| | ... | - address - IP address to expect. Type: string
+| | ... | - prefix - length of subnet prefix to expect. Type: string
+| | ... | - fib_address - IP address to expect in fib table. Type: string
+| | ... | - fib_mac - MAC address to expect in fib table. Type: string
+| | ... | - settings - ipv6 interface settings to expect. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| IPv6 config from Honeycomb should be \| ${nodes['DUT1']} \
+| | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 64 \
+| | ... | \| 10::11 \| 08:00:27:c0:5d:37 \| ${{'enabled': True, 'mtu': 1500}} \|
+| | [Arguments] | ${node} | ${interface} | ${address} | ${prefix}
+| | ... | ${fib_address} | ${fib_mac} | ${settings}
+| | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface}
+| | Should be equal | ${address}
+| | ... | ${api_data['ietf-ip:ipv6']['address'][0]['ip']}
+| | Should be equal | ${prefix}
+| | ... | ${api_data['ietf-ip:ipv6']['address'][0]['prefix-length']}
+| | Should be equal | ${fib_address}
+| | ... | ${api_data['ietf-ip:ipv6']['neighbor'][0]['ip']
+| | Should be equal | ${fib_mac}
+| | ... | ${api_data['ietf-ip:ipv6']['neighbor'][0]['link-layer-address']
+| | :FOR | ${key} | IN | @{settings.keys()}
+| | | Should be equal
+| | ... | ${settings['{key']} | ${api_data['ietf-ip:ipv6']['{$key}']}
+
+| IPv6 config from VAT should be
+| | [Documentation] | Retrieves interface ipv6 configuration through VAT and\
+| | ... | compares with state supplied in argument.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface on the specified node. Type: string
+| | ... | - address - IP address to expect. Type: string
+| | ... | - prefix - length of subnet prefix to expect. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| IPv6 config from VAT should be \| ${nodes['DUT1']} \
+| | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 64 \|
+| | [Arguments] | ${node} | ${interface} | ${address} | ${prefix}
+| | ${vpp_data}= | interfaceCLI.VPP get interface ip addresses
+| | ... | ${node} | ${interface} | ipv6
+| | Should be equal | ${vpp_data[0]['ip']} | ${address}
+| | Should be equal | ${vpp_data[0]['prefix-length']} | ${prefix}
+
+| Honeycomb sets interface ethernet and routing configuration
+| | [Documentation] | Uses Honeycomb API to change interface configuration.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface on the specified node. Type: string
+| | ... | - ethernet - interface ethernet settings. Type: dictionary
+| | ... | - routing - interface routing settings. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb sets interface ethernet and routing configuration \
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${{'mtu': 1500}} \
+| | ... | \| ${{'vrf-if': 2}} \|
+| | [Arguments] | ${node} | ${interface} | ${ethernet} | ${routing}
+| | :FOR | ${key} | IN | @{ethernet.keys()}
+| | | interfaceAPI.Configure interface ethernet
+| | | ... | ${node} | ${interface} | ${key} | ${ethernet['${key}']}
+| | :FOR | ${key} | IN | @{routing.keys()}
+| | | interfaceAPI.Configure interface routing
+| | | ... | ${node} | ${interface} | ${key} | ${routing['${key}']}
+
+| Interface ethernet and routing configuration from Honeycomb should be
+| | [Documentation] | Retrieves interface routing and ethernet configuration\
+| | ... | through Honeycomb and compares with settings supplied in arguments.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface on the specified node. Type: string
+| | ... | - ethernet - interface ethernet settings. Type: dictionary
+| | ... | - routing - interface routing settings. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Interface ethernet and routing configuration from Honeycomb \
+| | ... | should be \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \
+| | ... | \| ${{'mtu': 1500}} \| ${{'vrf-id': 2}} \|
+| | [Arguments] | ${node} | ${interface} | ${ethernet} | ${routing}
+| | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface}
+| | :FOR | ${key} | IN | @{ethernet.keys()}
+| | | Should be equal | ${api_data['${key}']} | ${ethernet['${key}']}
+| | :FOR | ${key} | IN | @{routing.keys()}
+| | | Should be equal | ${api_data['${key}']} | ${routing['${key}']}
+
+| Interface ethernet and routing configuration from VAT should be
+| | [Documentation] | Retrieves interface routing and ethernet configuration\
+| | ... | through VAT and compares with settings supplied in arguments.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface on the specified node. Type: string
+| | ... | - mtu - value of maximum transmission unit expected. Type: integer
+| | ... | - vrf-id - ID number of a VPN expected on interface. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Interface ethernet and routing configuration from VAT \
+| | ... | should be \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1500} \
+| | ... | \| ${2} \|
+| | [Arguments] | ${node} | ${interface} | ${mtu} | ${vrf-id}
+| | ${vat_data}= | InterfaceCLI.VPP get interface data | ${node} | ${interface}
+| | Should be equal | ${vat_data['mtu']} | ${mtu}
+| | Should be equal | ${vat_data['sub_inner_vlan_id']} | ${vrf-id}

diff --git a/resources/templates/vat/ip_address_dump.vat b/resources/templates/vat/ip_address_dump.vat
new file mode 100644 (file)
index 0000000..60585ed
--- /dev/null
+++ b/resources/templates/vat/ip_address_dump.vat
@@ -0,0 +1 @@
+ip_address_dump {ip_version} sw_if_index {sw_if_index}

diff --git a/tests/suites/honeycomb/interface_management.robot b/tests/suites/honeycomb/interface_management.robot
index 37200d0..f741f95 100644 (file)
--- a/tests/suites/honeycomb/interface_management.robot
+++ b/tests/suites/honeycomb/interface_management.robot
@@ -12,8 +12,19 @@
 # limitations under the License.
 
 *** Variables ***
+# Node and interface to run tests on.
 | ${node}= | ${nodes['DUT1']}
 | ${interface}= | ${node['interfaces'].values()[0]['name']}
+# Configuration which will be set and verified during tests.
+| @{ipv4_address}= | 192.168.0.2 | 255.255.255.0
+| @{ipv4_neighbor}= | 192.168.0.3 | 08:00:27:c0:5d:37
+| &{ipv4_settings}= | enabled=${True} | forwarding=${True} | mtu=9000
+| @{ipv6_address}= | 10::10 | 64
+| @{ipv6_neighbor}= | 10::11 | 08:00:27:c0:5d:37
+| &{ipv6_settings}= | enabled=${True} | forwarding=${True} | mtu=9000
+| ... | dup-addr-detect-transmits=5
+| &{ethernet}= | mtu=9000
+| &{routing}= | vrf-id=27
 
 *** Settings ***
 | Resource | resources/libraries/robot/default.robot
@@ -27,8 +38,8 @@
 | ... | Test suite uses the first interface of the first DUT node.
 
 *** Test Cases ***
-| Honeycomb modifies interface state
-| | [Documentation] | Check if Honeycomb API can modify the admin state of
+| Honeycomb configures and reads interface state
+| | [Documentation] | Check if Honeycomb API can modify the admin state of\
 | | ... | VPP interfaces.
 | | [Tags] | honeycomb_sanity
 | | Given Interface state is | ${node} | ${interface} | down
@@ -40,3 +51,38 @@
 | | Then Interface state from Honeycomb should be
 | | ... | ${node} | ${interface} | down
 | | And Interface state from VAT should be | ${node} | ${interface} | down
+
+| Honeycomb modifies interface configuration - ipv4
+| | [Documentation] | Check if Honeycomb API can configure interfaces for ipv4.
+| | [Tags] | honeycomb_sanity
+| | When Honeycomb sets interface ipv4 configuration
+| | ... | ${node} | ${interface} | @{ipv4_address} | @{ipv4_neighbor}
+| | ... | ${ipv4_settings}
+| | Then IPv4 config from Honeycomb should be
+| | ... | ${node} | ${interface} | @{ipv4_address} | @{ipv4_neighbor}
+| | ... | ${ipv4_settings}
+| | And IPv4 config from VAT should be
+| | ... | ${node} | ${interface} | @{ipv4_address}
+
+| Honeycomb modifies interface configuration - ipv6
+| | [Documentation] | Check if Honeycomb API can configure interfaces for ipv6.
+| | [Tags] | honeycomb_sanity
+| | When Honeycomb sets interface ipv6 configuration
+| | ... | ${node} | ${interface} | @{ipv6_address} | @{ipv6_neighbor}
+| | ... | ${ipv6_settings}
+| | Then IPv6 config from Honeycomb should be
+| | ... | ${node} | ${interface} | @{ipv6_address} | @{ipv6_neighbor}
+| | ... | ${ipv6_settings}
+| | And IPv6 config from VAT should be
+| | ... | ${node} | ${interface} | @{ipv6_address}
+
+| Honeycomb modifies interface configuration - ethernet,routing
+| | [Documentation] | Check if Honeycomb API can configure interface ethernet\
+| | ... | and routing settings.
+| | [Tags] | honeycomb_sanity
+| | When Honeycomb sets interface ethernet and routing configuration
+| | ... | ${node} | ${interface} | ${ethernet} | ${routing}
+| | Then Interface ethernet and routing configuration from Honeycomb should be
+| | ... | ${node} | ${interface} | ${ethernet} | ${routing}
+| | And Interface ethernet and routing configuration from VAT should be
+| | ... | ${node} | ${interface} | ${ethernet['mtu']} | ${routing['vrf-id']}