{
"version": 4,
- "terraform_version": "0.15.3",
- "serial": 1167,
+ "terraform_version": "1.0.0",
+ "serial": 1170,
"lineage": "e4e7f30a-652d-7a31-e31c-5e3a3388c9b9",
"outputs": {},
"resources": [
"datacenters": [
"yul1"
],
- "deployment_id": "1cd42f80-d43d-96cf-bce9-c1f77872e48b",
+ "deployment_id": "4dc972fd-cb2c-51d8-f730-08b5f7554ceb",
"deployment_status": "successful",
"deregister_on_destroy": true,
"deregister_on_id_change": true,
"id": "prod-alertmanager",
"jobspec": "job \"prod-alertmanager\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-alertmanager\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The constraint allows restricting the set of eligible nodes. Constraints\n # may filter on attributes or client metadata.\n #\n # For more information and examples on the \"volume\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/constraint\n #\n constraint {\n attribute = \"${attr.cpu.arch}\"\n operator = \"!=\"\n value = \"arm64\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task\n #\n task \"prod-task1-alertmanager\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"exec\"\n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n command = \"local/alertmanager-0.21.0.linux-amd64/alertmanager\"\n args = [\n \"--config.file=secrets/alertmanager.yml\"\n ]\n }\n\n # The artifact stanza instructs Nomad to fetch and unpack a remote resource,\n # such as a file, tarball, or binary. Nomad downloads artifacts using the\n # popular go-getter library, which permits downloading artifacts from a\n # variety of locations using a URL as the input source.\n #\n # For more information and examples on the \"artifact\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/artifact\n #\n artifact {\n source = \"https://github.com/prometheus/alertmanager/releases/download/v0.21.0/alertmanager-0.21.0.linux-amd64.tar.gz\"\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template\n #\n template {\n change_mode = \"noop\"\n change_signal = \"SIGINT\"\n destination = \"secrets/alertmanager.yml\"\n left_delimiter = \"{{{\"\n right_delimiter = \"}}}\"\n data = \u003c\u003cEOH\n# The directory from which notification templates are read.\ntemplates:\n- '/etc/alertmanager/template/*.tmpl'\n\n#tls_config:\n# # CA certificate to validate the server certificate with.\n# ca_file: \u003cfilepath\u003e ]\n#\n# # Certificate and key files for client cert authentication to the server.\n# cert_file: \u003cfilepath\u003e\n# key_file: \u003cfilepath\u003e\n#\n# # ServerName extension to indicate the name of the server.\n# # http://tools.ietf.org/html/rfc4366#section-3.1\n# server_name: \u003cstring\u003e\n#\n# # Disable validation of the server certificate.\n# insecure_skip_verify: true\n\n# The root route on which each incoming alert enters.\nroute:\n receiver: 'default-slack-receiver'\n\n # The labels by which incoming alerts are grouped together. For example,\n # multiple alerts coming in for cluster=A and alertname=LatencyHigh would\n # be batched into a single group.\n #\n # To aggregate by all possible labels use '...' as the sole label name.\n # This effectively disables aggregation entirely, passing through all\n # alerts as-is. This is unlikely to be what you want, unless you have\n # a very low alert volume or your upstream notification system performs\n # its own grouping. Example: group_by: [...]\n group_by: ['alertname']\n\n # When a new group of alerts is created by an incoming alert, wait at\n # least 'group_wait' to send the initial notification.\n # This way ensures that you get multiple alerts for the same group that start\n # firing shortly after another are batched together on the first\n # notification.\n group_wait: 30s\n\n # When the first notification was sent, wait 'group_interval' to send a batch\n # of new alerts that started firing for that group.\n group_interval: 5m\n\n # If an alert has successfully been sent, wait 'repeat_interval' to\n # resend them.\n repeat_interval: 3h\n\n # All the above attributes are inherited by all child routes and can\n # overwritten on each.\n # The child route trees.\n routes:\n - match_re:\n alertname: JenkinsJob.*\n receiver: jenkins-slack-receiver\n routes:\n - match:\n severity: critical\n receiver: 'jenkins-slack-receiver'\n\n - match_re:\n service: .*\n receiver: default-slack-receiver\n routes:\n - match:\n severity: critical\n receiver: 'default-slack-receiver'\n\n# Inhibition rules allow to mute a set of alerts given that another alert is\n# firing.\n# We use this to mute any warning-level notifications if the same alert is\n# already critical.\ninhibit_rules:\n- source_match:\n severity: 'critical'\n target_match:\n severity: 'warning'\n equal: ['alertname', 'instance']\n\nreceivers:\n- name: 'jenkins-slack-receiver'\n slack_configs:\n - api_url: 'TE07RD1V1/B01U1NV9HV3/hKZXJJ74g2JcISq4K3QC1eG9'\n channel: '#fdio-jobs-monitoring'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\n\n- name: 'default-slack-receiver'\n slack_configs:\n - api_url: 'TE07RD1V1/B01UUK23B6C/hZTcCu42FUv8d6rtirHtcYIi'\n channel: '#fdio-infra-monitoring'\n send_resolved: true\n icon_url: https://avatars3.githubusercontent.com/u/3380462\n title: |-\n [{{ .Status | toUpper }}{{ if eq .Status \"firing\" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }}\n {{- if gt (len .CommonLabels) (len .GroupLabels) -}}\n {{\" \"}}(\n {{- with .CommonLabels.Remove .GroupLabels.Names }}\n {{- range $index, $label := .SortedPairs -}}\n {{ if $index }}, {{ end }}\n {{- $label.Name }}=\"{{ $label.Value -}}\"\n {{- end }}\n {{- end -}}\n )\n {{- end }}\n text: \u003e-\n {{ range .Alerts -}}\n *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }}\n\n *Description:* {{ .Annotations.description }}\n\n *Details:*\n {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}`\n {{ end }}\n {{ end }}\nEOH\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"alertmanager\"\n port = \"alertmanager\"\n tags = [ \"alertmanager${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Alertmanager Check Live\"\n type = \"http\"\n path = \"/-/healthy\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 1000\n memory = 1024\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"alertmanager\" {\n static = 9093\n }\n }\n }\n }\n }\n}",
"json": null,
- "modify_index": "8219920",
+ "modify_index": "8259282",
"name": "prod-alertmanager",
"namespace": "default",
"policy_override": null,
"schema_version": 0,
"attributes": {
"filename": null,
- "id": "ca0c95bbe91c4ac393d5cd5bef8efb90fb5f176f266ba233542fd4338b51c6cc",
- "rendered": "job \"prod-mc\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers.html\n #\n type = \"batch\"\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group.html\n #\n group \"prod-group1-mc\" {\n task \"prod-task1-create-buckets\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"minio/mc:RELEASE.2020-12-10T01-26-17Z\"\n entrypoint = [\n \"/bin/sh\",\n \"-c\",\n \"mc config host add LOCALMINIO http://storage.service.consul:9000 $MINIO_ACCESS_KEY $MINIO_SECRET_KEY \u0026\u0026 mc mb -p LOCALMINIO/logs.fd.io LOCALMINIO/docs.fd.io ; mc policy set public LOCALMINIO/logs.fd.io mc policy set public LOCALMINIO/docs.fd.io mc ilm add --expiry-days '180' LOCALMINIO/logs.fd.io mc admin user add LOCALMINIO storage Storage1234 mc admin policy set LOCALMINIO writeonly user=storage\"\n ]\n dns_servers = [ \"${attr.unique.network.ip-address}\" ]\n privileged = false\n }\n\n # The env stanza configures a list of environment variables to populate\n # the task's environment before starting.\n env {\n \n MINIO_ACCESS_KEY = \"minio\"\n MINIO_SECRET_KEY = \"minio123\"\n \n \n }\n }\n }\n}\n",
+ "id": "558e3a2e96b2b0f9d94e57f74a784d89020ce8d1d877e7adb82301065dfbacb7",
+ "rendered": "job \"prod-mc\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers.html\n #\n type = \"batch\"\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group.html\n #\n group \"prod-group1-mc\" {\n task \"prod-task1-create-buckets\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"minio/mc:RELEASE.2021-07-08T01-15-01Z\"\n entrypoint = [\n \"/bin/sh\",\n \"-c\",\n \"mc config host add LOCALMINIO http://storage.service.consul:9000 $MINIO_ACCESS_KEY $MINIO_SECRET_KEY \u0026\u0026 mc mb -p LOCALMINIO/logs.fd.io LOCALMINIO/docs.fd.io ; mc policy set public LOCALMINIO/logs.fd.io mc policy set public LOCALMINIO/docs.fd.io mc ilm add --expiry-days '180' LOCALMINIO/logs.fd.io mc admin user add LOCALMINIO storage Storage1234 mc admin policy set LOCALMINIO writeonly user=storage\"\n ]\n dns_servers = [ \"${attr.unique.network.ip-address}\" ]\n privileged = false\n }\n\n # The env stanza configures a list of environment variables to populate\n # the task's environment before starting.\n env {\n \n MINIO_ACCESS_KEY = \"minio\"\n MINIO_SECRET_KEY = \"minio123\"\n \n \n }\n }\n }\n}\n",
"template": "job \"${job_name}\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"${datacenters}\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers.html\n #\n type = \"batch\"\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group.html\n #\n group \"prod-group1-mc\" {\n task \"prod-task1-create-buckets\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n %{ if use_vault_provider }\n vault {\n policies = \"${vault_kv_policy_name}\"\n }\n %{ endif }\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"${image}\"\n entrypoint = [\n \"/bin/sh\",\n \"-c\",\n \"${command}\"\n ]\n dns_servers = [ \"$${attr.unique.network.ip-address}\" ]\n privileged = false\n }\n\n # The env stanza configures a list of environment variables to populate\n # the task's environment before starting.\n env {\n %{ if use_vault_provider }\n {{ with secret \"${vault_kv_path}\" }}\n MINIO_ACCESS_KEY = \"{{ .Data.data.${vault_kv_field_access_key} }}\"\n MINIO_SECRET_KEY = \"{{ .Data.data.${vault_kv_field_secret_key} }}\"\n {{ end }}\n %{ else }\n MINIO_ACCESS_KEY = \"${access_key}\"\n MINIO_SECRET_KEY = \"${secret_key}\"\n %{ endif }\n ${ envs }\n }\n }\n }\n}\n",
"vars": {
"access_key": "minio",
"command": "mc config host add LOCALMINIO http://storage.service.consul:9000 $MINIO_ACCESS_KEY $MINIO_SECRET_KEY \u0026\u0026 mc mb -p LOCALMINIO/logs.fd.io LOCALMINIO/docs.fd.io ; mc policy set public LOCALMINIO/logs.fd.io mc policy set public LOCALMINIO/docs.fd.io mc ilm add --expiry-days '180' LOCALMINIO/logs.fd.io mc admin user add LOCALMINIO storage Storage1234 mc admin policy set LOCALMINIO writeonly user=storage",
"datacenters": "yul1",
"envs": "",
- "image": "minio/mc:RELEASE.2020-12-10T01-26-17Z",
+ "image": "minio/mc:RELEASE.2021-07-08T01-15-01Z",
"job_name": "prod-mc",
"minio_port": "9000",
"minio_service_name": "storage",
"schema_version": 0,
"attributes": {
"filename": null,
- "id": "159eaa53aac72f9e698b899822c1bc37e57a815560e0c075a5ce4222752e71e4",
- "rendered": "job \"prod-minio\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # All groups in this job should be scheduled on different hosts.\n constraint {\n operator = \"distinct_hosts\"\n value = \"true\"\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-minio\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 4\n\n # https://www.nomadproject.io/docs/job-specification/volume\n \n volume \"prod-volume1-minio\" {\n type = \"host\"\n read_only = false\n source = \"prod-volume-data1-1\"\n }\n \n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-minio\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n \n volume_mount {\n volume = \"prod-volume1-minio\"\n destination = \"/data/\"\n read_only = false\n }\n \n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"minio/minio:RELEASE.2020-12-03T05-49-24Z\"\n dns_servers = [ \"172.17.0.1\" ]\n network_mode = \"host\"\n command = \"server\"\n args = [ \"http://10.32.8.1{4...7}:9000/data/\" ]\n port_map {\n http = 9000\n }\n privileged = false\n }\n\n # The env stanza configures a list of environment variables to populate\n # the task's environment before starting.\n env {\n\n MINIO_ACCESS_KEY = \"minio\"\n MINIO_SECRET_KEY = \"minio123\"\n\n MINIO_BROWSER=\"off\"\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"storage\"\n port = \"http\"\n tags = [ \"storage${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Min.io Server HTTP Check Live\"\n type = \"http\"\n port = \"http\"\n protocol = \"http\"\n method = \"GET\"\n path = \"/minio/health/live\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n check {\n name = \"Min.io Server HTTP Check Ready\"\n type = \"http\"\n port = \"http\"\n protocol = \"http\"\n method = \"GET\"\n path = \"/minio/health/ready\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 40000\n memory = 40000\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"http\" {\n static = 9000\n }\n }\n }\n }\n }\n}\n",
+ "id": "3df2a58bed278738e5280a087b9d56413910e767c60d6702506bd7820cfdd5b4",
+ "rendered": "job \"prod-minio\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # All groups in this job should be scheduled on different hosts.\n constraint {\n operator = \"distinct_hosts\"\n value = \"true\"\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-minio\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 4\n\n # https://www.nomadproject.io/docs/job-specification/volume\n \n volume \"prod-volume1-minio\" {\n type = \"host\"\n read_only = false\n source = \"prod-volume-data1-1\"\n }\n \n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-minio\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n \n volume_mount {\n volume = \"prod-volume1-minio\"\n destination = \"/data/\"\n read_only = false\n }\n \n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"minio/minio:RELEASE.2021-07-08T01-15-01Z\"\n dns_servers = [ \"172.17.0.1\" ]\n network_mode = \"host\"\n command = \"server\"\n args = [ \"http://10.32.8.1{4...7}:9000/data/\" ]\n port_map {\n http = 9000\n }\n privileged = false\n }\n\n # The env stanza configures a list of environment variables to populate\n # the task's environment before starting.\n env {\n\n MINIO_ACCESS_KEY = \"minio\"\n MINIO_SECRET_KEY = \"minio123\"\n\n MINIO_BROWSER=\"off\"\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"storage\"\n port = \"http\"\n tags = [ \"storage${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Min.io Server HTTP Check Live\"\n type = \"http\"\n port = \"http\"\n protocol = \"http\"\n method = \"GET\"\n path = \"/minio/health/live\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n check {\n name = \"Min.io Server HTTP Check Ready\"\n type = \"http\"\n port = \"http\"\n protocol = \"http\"\n method = \"GET\"\n path = \"/minio/health/ready\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 40000\n memory = 40000\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"http\" {\n static = 9000\n }\n }\n }\n }\n }\n}\n",
"template": "job \"${job_name}\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"${datacenters}\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n%{ if use_canary }\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n%{ endif }\n }\n\n # All groups in this job should be scheduled on different hosts.\n constraint {\n operator = \"distinct_hosts\"\n value = \"true\"\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-minio\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = ${group_count}\n\n # https://www.nomadproject.io/docs/job-specification/volume\n %{ if use_host_volume }\n volume \"prod-volume1-minio\" {\n type = \"host\"\n read_only = false\n source = \"${host_volume}\"\n }\n %{ endif }\n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-minio\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n %{ if use_host_volume }\n volume_mount {\n volume = \"prod-volume1-minio\"\n destination = \"${data_dir}\"\n read_only = false\n }\n %{ endif }\n\n %{ if use_vault_provider }\n vault {\n policies = \"${vault_kv_policy_name}\"\n }\n %{ endif }\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"${image}\"\n dns_servers = [ \"172.17.0.1\" ]\n network_mode = \"host\"\n command = \"server\"\n args = [ \"${host}:${port}${data_dir}\" ]\n port_map {\n http = ${port}\n }\n privileged = false\n }\n\n # The env stanza configures a list of environment variables to populate\n # the task's environment before starting.\n env {\n%{ if use_vault_provider }\n{{ with secret \"${vault_kv_path}\" }}\n MINIO_ACCESS_KEY = \"{{ .Data.data.${vault_kv_field_access_key} }}\"\n MINIO_SECRET_KEY = \"{{ .Data.data.${vault_kv_field_secret_key} }}\"\n{{ end }}\n%{ else }\n MINIO_ACCESS_KEY = \"${access_key}\"\n MINIO_SECRET_KEY = \"${secret_key}\"\n%{ endif }\n ${ envs }\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"${service_name}\"\n port = \"http\"\n tags = [ \"storage$${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Min.io Server HTTP Check Live\"\n type = \"http\"\n port = \"http\"\n protocol = \"http\"\n method = \"GET\"\n path = \"/minio/health/live\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n check {\n name = \"Min.io Server HTTP Check Ready\"\n type = \"http\"\n port = \"http\"\n protocol = \"http\"\n method = \"GET\"\n path = \"/minio/health/ready\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = ${cpu}\n memory = ${memory}\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"http\" {\n static = ${port}\n }\n }\n }\n }\n }\n}\n",
"vars": {
"access_key": "minio",
"group_count": "4",
"host": "http://10.32.8.1{4...7}",
"host_volume": "prod-volume-data1-1",
- "image": "minio/minio:RELEASE.2020-12-03T05-49-24Z",
+ "image": "minio/minio:RELEASE.2021-07-08T01-15-01Z",
"job_name": "prod-minio",
"memory": "40000",
"memory_proxy": "128",
"schema_version": 0,
"attributes": {
"allocation_ids": [
- "bd315c5e-035d-3a08-698d-d119fb48035f",
- "e82e0119-4d2e-89eb-baa3-0ec6bde71661",
- "24e462a6-6d55-a109-47bf-4c83ad5596a7"
+ "da0b1991-d59e-dfe5-3dec-ec64dd9b8ec2",
+ "3a53d56a-fb8e-7218-99fe-0798241aea0d",
+ "59658812-d06d-29bd-e5f3-d35f6ff4def9",
+ "263d4e38-c44c-26c0-451d-c5b1679f5250",
+ "b66d7688-6fdb-2f49-f5d5-24719386531f",
+ "7b3c5ce9-996e-0dc3-3e9e-aced1dd928ca",
+ "732074da-1082-4cc3-8717-e83421a97739",
+ "3172e318-19f8-c9d7-17af-7cab03429e6f"
],
"datacenters": [
"yul1"
],
- "deployment_id": "3d2b1511-51ee-f7e8-5e23-36a0e1022776",
+ "deployment_id": "2d18d058-a30a-a944-feb9-3e2ed8804600",
"deployment_status": "successful",
"deregister_on_destroy": true,
"deregister_on_id_change": true,
"detach": false,
"id": "prod-minio",
- "jobspec": "job \"prod-minio\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # All groups in this job should be scheduled on different hosts.\n constraint {\n operator = \"distinct_hosts\"\n value = \"true\"\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-minio\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 4\n\n # https://www.nomadproject.io/docs/job-specification/volume\n \n volume \"prod-volume1-minio\" {\n type = \"host\"\n read_only = false\n source = \"prod-volume-data1-1\"\n }\n \n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-minio\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n \n volume_mount {\n volume = \"prod-volume1-minio\"\n destination = \"/data/\"\n read_only = false\n }\n \n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"minio/minio:RELEASE.2020-12-03T05-49-24Z\"\n dns_servers = [ \"172.17.0.1\" ]\n network_mode = \"host\"\n command = \"server\"\n args = [ \"http://10.32.8.1{4...7}:9000/data/\" ]\n port_map {\n http = 9000\n }\n privileged = false\n }\n\n # The env stanza configures a list of environment variables to populate\n # the task's environment before starting.\n env {\n\n MINIO_ACCESS_KEY = \"minio\"\n MINIO_SECRET_KEY = \"minio123\"\n\n MINIO_BROWSER=\"off\"\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"storage\"\n port = \"http\"\n tags = [ \"storage${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Min.io Server HTTP Check Live\"\n type = \"http\"\n port = \"http\"\n protocol = \"http\"\n method = \"GET\"\n path = \"/minio/health/live\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n check {\n name = \"Min.io Server HTTP Check Ready\"\n type = \"http\"\n port = \"http\"\n protocol = \"http\"\n method = \"GET\"\n path = \"/minio/health/ready\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 40000\n memory = 40000\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"http\" {\n static = 9000\n }\n }\n }\n }\n }\n}\n",
+ "jobspec": "job \"prod-minio\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 1\n\n health_check = \"checks\"\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 1\n\n # Specifies if the job should auto-promote to the canary version when all\n # canaries become healthy during a deployment. Defaults to false which means\n # canaries must be manually updated with the nomad deployment promote\n # command.\n auto_promote = true\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = true\n\n }\n\n # All groups in this job should be scheduled on different hosts.\n constraint {\n operator = \"distinct_hosts\"\n value = \"true\"\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # https://www.nomadproject.io/docs/job-specification/group\n #\n group \"prod-group1-minio\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 4\n\n # https://www.nomadproject.io/docs/job-specification/volume\n \n volume \"prod-volume1-minio\" {\n type = \"host\"\n read_only = false\n source = \"prod-volume-data1-1\"\n }\n \n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-minio\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n \n volume_mount {\n volume = \"prod-volume1-minio\"\n destination = \"/data/\"\n read_only = false\n }\n \n\n \n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"minio/minio:RELEASE.2021-07-08T01-15-01Z\"\n dns_servers = [ \"172.17.0.1\" ]\n network_mode = \"host\"\n command = \"server\"\n args = [ \"http://10.32.8.1{4...7}:9000/data/\" ]\n port_map {\n http = 9000\n }\n privileged = false\n }\n\n # The env stanza configures a list of environment variables to populate\n # the task's environment before starting.\n env {\n\n MINIO_ACCESS_KEY = \"minio\"\n MINIO_SECRET_KEY = \"minio123\"\n\n MINIO_BROWSER=\"off\"\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # https://www.nomadproject.io/docs/job-specification/service\n #\n service {\n name = \"storage\"\n port = \"http\"\n tags = [ \"storage${NOMAD_ALLOC_INDEX}\" ]\n check {\n name = \"Min.io Server HTTP Check Live\"\n type = \"http\"\n port = \"http\"\n protocol = \"http\"\n method = \"GET\"\n path = \"/minio/health/live\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n check {\n name = \"Min.io Server HTTP Check Ready\"\n type = \"http\"\n port = \"http\"\n protocol = \"http\"\n method = \"GET\"\n path = \"/minio/health/ready\"\n interval = \"10s\"\n timeout = \"2s\"\n }\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # https://www.nomadproject.io/docs/job-specification/resources\n #\n resources {\n cpu = 40000\n memory = 40000\n # The network stanza specifies the networking requirements for the task\n # group, including the network mode and port allocations. When scheduling\n # jobs in Nomad they are provisioned across your fleet of machines along\n # with other jobs and services. Because you don't know in advance what host\n # your job will be provisioned on, Nomad will provide your tasks with\n # network configuration when they start up.\n #\n # https://www.nomadproject.io/docs/job-specification/network\n #\n network {\n port \"http\" {\n static = 9000\n }\n }\n }\n }\n }\n}\n",
"json": null,
- "modify_index": "7541139",
+ "modify_index": "8769570",
"name": "prod-minio",
"namespace": "default",
"policy_override": null,
"schema_version": 0,
"attributes": {
"allocation_ids": [
- "0cb0b594-09c2-bad6-fca4-0fbc2479ef3e",
- "99dab0de-0e97-4ad8-56eb-ffdd062ef656"
+ "0cb0b594-09c2-bad6-fca4-0fbc2479ef3e"
],
"datacenters": [
"yul1"
"schema_version": 0,
"attributes": {
"allocation_ids": [
+ "20d22188-d04e-2f7d-57e7-62b79c39156d",
+ "050b4a00-1192-4a2b-4a06-ca8916d09597",
"dd7ade6e-43c4-cac3-3294-9bd32d6b9764",
- "d4ad3ff3-7b2d-b257-e24e-93955addefad",
"037ac779-c647-2dba-5b64-d11e2243066c"
],
"datacenters": [
"schema_version": 0,
"attributes": {
"allocation_ids": [
- "516e389c-e3ce-92ed-217d-68fceb56f61e",
- "93db39cc-26d0-ef8a-02af-f10d0e7d8db0",
- "a8ee42a1-ff17-8a57-6276-75dc9498653e",
- "a497e3ee-2d8b-2750-620e-223d23114ba0"
+ "7d13dda4-e47f-e2b5-5ebe-e4c2c57f6a66",
+ "e41391a1-bfbf-f1cf-831d-d87da6da8b94",
+ "c9753985-b97f-5d58-79f3-843b63411333",
+ "aa511cae-fa5b-1127-1718-819660c5702b"
],
"datacenters": [
"yul1"
{
"version": 4,
- "terraform_version": "0.15.3",
- "serial": 1165,
+ "terraform_version": "1.0.0",
+ "serial": 1167,
"lineage": "e4e7f30a-652d-7a31-e31c-5e3a3388c9b9",
"outputs": {},
"resources": [
"schema_version": 0,
"attributes": {
"allocation_ids": [
- "778f4f9d-dea8-e5bd-c9cf-f7a7e2d3a24e",
- "644eb7b6-268c-4b0f-ba49-e3f7d2582298"
+ "778f4f9d-dea8-e5bd-c9cf-f7a7e2d3a24e"
],
"datacenters": [
"yul1"
"schema_version": 0,
"attributes": {
"filename": null,
- "id": "70bf6c25655c0506a3f1a3946c114216b977c39241f495ef56ef0c07b888e8bc",
- "rendered": "job \"prod-nginx\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers.html\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 0\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = false\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 0\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group.html\n #\n group \"prod-group1-nginx\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # https://www.nomadproject.io/docs/job-specification/volume\n \n volume \"prod-volume1-nginx\" {\n type = \"host\"\n read_only = false\n source = \"prod-volume-data1-1\"\n }\n \n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-nginx\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"nginx:stable\"\n port_map {\n https = 443\n }\n privileged = false\n volumes = [\n \"/etc/ssl/certs/docs.nginx.service.consul.crt:/etc/ssl/certs/docs.nginx.service.consul.crt\",\n \"/etc/ssl/certs/docs.nginx.service.consul.key:/etc/ssl/certs/docs.nginx.service.consul.key\",\n \"/etc/ssl/certs/logs.nginx.service.consul.crt:/etc/ssl/certs/logs.nginx.service.consul.crt\",\n \"/etc/ssl/certs/logs.nginx.service.consul.key:/etc/ssl/certs/logs.nginx.service.consul.key\",\n \"custom/upstream.conf:/etc/nginx/conf.d/upstream.conf\",\n \"custom/logs.conf:/etc/nginx/conf.d/logs.conf\",\n \"custom/docs.conf:/etc/nginx/conf.d/docs.conf\"\n ]\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template.html\n #\n template {\n data = \u003c\u003cEOH\n upstream storage {\n {{ range service \"storage\" }}\n server {{ .Address }}:{{ .Port }};\n {{ end }}\n }\n EOH\n destination = \"custom/upstream.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl default_server;\n server_name logs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/logs.nginx.service.consul.crt;\n ssl_certificate_key /etc/ssl/certs/logs.nginx.service.consul.key;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/;\n server_name_in_redirect off;\n }\n location ~ (.*html.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/html;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*txt.gz|.*log.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/plain;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*xml.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type application/xml;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/logs.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl;\n server_name docs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/docs.nginx.service.consul.crt;\n ssl_certificate_key /etc/ssl/certs/docs.nginx.service.consul.key;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/docs.fd.io/;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/docs.conf\"\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service.html\n #\n service {\n name = \"nginx\"\n port = \"https\"\n tags = [ \"docs\", \"logs\" ]\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources.html\n #\n resources {\n cpu = 2000\n memory = 4096\n network {\n mode = \"bridge\"\n port \"https\" {\n static = 443\n }\n }\n }\n }\n }\n}",
- "template": "job \"${job_name}\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"${datacenters}\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers.html\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 0\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = false\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 0\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group.html\n #\n group \"prod-group1-nginx\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # https://www.nomadproject.io/docs/job-specification/volume\n %{ if use_host_volume }\n volume \"prod-volume1-nginx\" {\n type = \"host\"\n read_only = false\n source = \"${host_volume}\"\n }\n %{ endif }\n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-nginx\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"nginx:stable\"\n port_map {\n https = 443\n }\n privileged = false\n volumes = [\n \"/etc/ssl/certs/docs.nginx.service.consul.crt:/etc/ssl/certs/docs.nginx.service.consul.crt\",\n \"/etc/ssl/certs/docs.nginx.service.consul.key:/etc/ssl/certs/docs.nginx.service.consul.key\",\n \"/etc/ssl/certs/logs.nginx.service.consul.crt:/etc/ssl/certs/logs.nginx.service.consul.crt\",\n \"/etc/ssl/certs/logs.nginx.service.consul.key:/etc/ssl/certs/logs.nginx.service.consul.key\",\n \"custom/upstream.conf:/etc/nginx/conf.d/upstream.conf\",\n \"custom/logs.conf:/etc/nginx/conf.d/logs.conf\",\n \"custom/docs.conf:/etc/nginx/conf.d/docs.conf\"\n ]\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template.html\n #\n template {\n data = \u003c\u003cEOH\n upstream storage {\n {{ range service \"storage\" }}\n server {{ .Address }}:{{ .Port }};\n {{ end }}\n }\n EOH\n destination = \"custom/upstream.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl default_server;\n server_name logs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/logs.nginx.service.consul.crt;\n ssl_certificate_key /etc/ssl/certs/logs.nginx.service.consul.key;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/;\n server_name_in_redirect off;\n }\n location ~ (.*html.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/html;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*txt.gz|.*log.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/plain;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*xml.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type application/xml;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/logs.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl;\n server_name docs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/docs.nginx.service.consul.crt;\n ssl_certificate_key /etc/ssl/certs/docs.nginx.service.consul.key;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/docs.fd.io/;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/docs.conf\"\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service.html\n #\n service {\n name = \"nginx\"\n port = \"https\"\n tags = [ \"docs\", \"logs\" ]\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources.html\n #\n resources {\n cpu = 2000\n memory = 4096\n network {\n mode = \"bridge\"\n port \"https\" {\n static = 443\n }\n }\n }\n }\n }\n}",
+ "id": "f6d48eb498752cd7c1c73a26a146961048a1b7f7d53602df55b413f27226e519",
+ "rendered": "job \"prod-nginx\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers.html\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 0\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = false\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 0\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group.html\n #\n group \"prod-group1-nginx\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # https://www.nomadproject.io/docs/job-specification/volume\n \n volume \"prod-volume1-nginx\" {\n type = \"host\"\n read_only = false\n source = \"prod-volume-data1-1\"\n }\n \n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-nginx\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"nginx:stable\"\n port_map {\n https = 443\n }\n privileged = false\n volumes = [\n \"/etc/ssl/certs/docs.nginx.service.consul.crt:/etc/ssl/certs/docs.nginx.service.consul.crt\",\n \"/etc/ssl/private/docs.nginx.service.consul.key:/etc/ssl/private/docs.nginx.service.consul.key\",\n \"/etc/ssl/certs/logs.nginx.service.consul.crt:/etc/ssl/certs/logs.nginx.service.consul.crt\",\n \"/etc/ssl/private/logs.nginx.service.consul.key:/etc/ssl/private/logs.nginx.service.consul.key\",\n \"custom/upstream.conf:/etc/nginx/conf.d/upstream.conf\",\n \"custom/logs.conf:/etc/nginx/conf.d/logs.conf\",\n \"custom/docs.conf:/etc/nginx/conf.d/docs.conf\"\n ]\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template.html\n #\n template {\n data = \u003c\u003cEOH\n upstream storage {\n {{ range service \"storage\" }}\n server {{ .Address }}:{{ .Port }};\n {{ end }}\n }\n EOH\n destination = \"custom/upstream.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl default_server;\n server_name logs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/logs.nginx.service.consul.crt;\n ssl_certificate_key /etc/ssl/private/logs.nginx.service.consul.key;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/;\n server_name_in_redirect off;\n }\n location ~ (.*html.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/html;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*txt.gz|.*log.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/plain;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*xml.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type application/xml;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/logs.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl;\n server_name docs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/docs.nginx.service.consul.crt;\n ssl_certificate_key /etc/ssl/private/docs.nginx.service.consul.key;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/docs.fd.io/;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/docs.conf\"\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service.html\n #\n service {\n name = \"nginx\"\n port = \"https\"\n tags = [ \"docs\", \"logs\" ]\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources.html\n #\n resources {\n cpu = 2000\n memory = 4096\n network {\n mode = \"bridge\"\n port \"https\" {\n static = 443\n }\n }\n }\n }\n }\n}",
+ "template": "job \"${job_name}\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"${datacenters}\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers.html\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 0\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = false\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 0\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group.html\n #\n group \"prod-group1-nginx\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # https://www.nomadproject.io/docs/job-specification/volume\n %{ if use_host_volume }\n volume \"prod-volume1-nginx\" {\n type = \"host\"\n read_only = false\n source = \"${host_volume}\"\n }\n %{ endif }\n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-nginx\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"nginx:stable\"\n port_map {\n https = 443\n }\n privileged = false\n volumes = [\n \"/etc/ssl/certs/docs.nginx.service.consul.crt:/etc/ssl/certs/docs.nginx.service.consul.crt\",\n \"/etc/ssl/private/docs.nginx.service.consul.key:/etc/ssl/private/docs.nginx.service.consul.key\",\n \"/etc/ssl/certs/logs.nginx.service.consul.crt:/etc/ssl/certs/logs.nginx.service.consul.crt\",\n \"/etc/ssl/private/logs.nginx.service.consul.key:/etc/ssl/private/logs.nginx.service.consul.key\",\n \"custom/upstream.conf:/etc/nginx/conf.d/upstream.conf\",\n \"custom/logs.conf:/etc/nginx/conf.d/logs.conf\",\n \"custom/docs.conf:/etc/nginx/conf.d/docs.conf\"\n ]\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template.html\n #\n template {\n data = \u003c\u003cEOH\n upstream storage {\n {{ range service \"storage\" }}\n server {{ .Address }}:{{ .Port }};\n {{ end }}\n }\n EOH\n destination = \"custom/upstream.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl default_server;\n server_name logs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/logs.nginx.service.consul.crt;\n ssl_certificate_key /etc/ssl/private/logs.nginx.service.consul.key;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/;\n server_name_in_redirect off;\n }\n location ~ (.*html.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/html;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*txt.gz|.*log.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/plain;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*xml.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type application/xml;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/logs.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl;\n server_name docs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/docs.nginx.service.consul.crt;\n ssl_certificate_key /etc/ssl/private/docs.nginx.service.consul.key;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/docs.fd.io/;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/docs.conf\"\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service.html\n #\n service {\n name = \"nginx\"\n port = \"https\"\n tags = [ \"docs\", \"logs\" ]\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources.html\n #\n resources {\n cpu = 2000\n memory = 4096\n network {\n mode = \"bridge\"\n port \"https\" {\n static = 443\n }\n }\n }\n }\n }\n}",
"vars": {
"datacenters": "yul1",
"host_volume": "prod-volume-data1-1",
"schema_version": 0,
"attributes": {
"allocation_ids": [
- "99dab0de-0e97-4ad8-56eb-ffdd062ef656",
- "2a22caca-680f-d551-8d33-a236a446ecd7",
- "7542b5ec-2690-6e2c-16de-e93ff5fddb7a",
- "e5dd038d-ac82-49d9-24c0-338460688136"
+ "0cb0b594-09c2-bad6-fca4-0fbc2479ef3e",
+ "99dab0de-0e97-4ad8-56eb-ffdd062ef656"
],
"datacenters": [
"yul1"
"deregister_on_id_change": true,
"detach": false,
"id": "prod-nginx",
- "jobspec": "job \"prod-nginx\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers.html\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 0\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = false\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 0\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group.html\n #\n group \"prod-group1-nginx\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # https://www.nomadproject.io/docs/job-specification/volume\n \n volume \"prod-volume1-nginx\" {\n type = \"host\"\n read_only = false\n source = \"prod-volume-data1-1\"\n }\n \n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-nginx\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"nginx:stable\"\n port_map {\n https = 443\n }\n privileged = false\n volumes = [\n \"/etc/ssl/certs/docs.nginx.service.consul.crt:/etc/ssl/certs/docs.nginx.service.consul.crt\",\n \"/etc/ssl/certs/docs.nginx.service.consul.key:/etc/ssl/certs/docs.nginx.service.consul.key\",\n \"/etc/ssl/certs/logs.nginx.service.consul.crt:/etc/ssl/certs/logs.nginx.service.consul.crt\",\n \"/etc/ssl/certs/logs.nginx.service.consul.key:/etc/ssl/certs/logs.nginx.service.consul.key\",\n \"custom/upstream.conf:/etc/nginx/conf.d/upstream.conf\",\n \"custom/logs.conf:/etc/nginx/conf.d/logs.conf\",\n \"custom/docs.conf:/etc/nginx/conf.d/docs.conf\"\n ]\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template.html\n #\n template {\n data = \u003c\u003cEOH\n upstream storage {\n {{ range service \"storage\" }}\n server {{ .Address }}:{{ .Port }};\n {{ end }}\n }\n EOH\n destination = \"custom/upstream.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl default_server;\n server_name logs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/logs.nginx.service.consul.crt;\n ssl_certificate_key /etc/ssl/certs/logs.nginx.service.consul.key;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/;\n server_name_in_redirect off;\n }\n location ~ (.*html.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/html;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*txt.gz|.*log.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/plain;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*xml.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type application/xml;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/logs.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl;\n server_name docs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/docs.nginx.service.consul.crt;\n ssl_certificate_key /etc/ssl/certs/docs.nginx.service.consul.key;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/docs.fd.io/;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/docs.conf\"\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service.html\n #\n service {\n name = \"nginx\"\n port = \"https\"\n tags = [ \"docs\", \"logs\" ]\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources.html\n #\n resources {\n cpu = 2000\n memory = 4096\n network {\n mode = \"bridge\"\n port \"https\" {\n static = 443\n }\n }\n }\n }\n }\n}",
+ "jobspec": "job \"prod-nginx\" {\n # The \"region\" parameter specifies the region in which to execute the job.\n # If omitted, this inherits the default region name of \"global\".\n # region = \"global\"\n #\n # The \"datacenters\" parameter specifies the list of datacenters which should\n # be considered when placing this task. This must be provided.\n datacenters = \"yul1\"\n\n # The \"type\" parameter controls the type of job, which impacts the scheduler's\n # decision on placement. This configuration is optional and defaults to\n # \"service\". For a full list of job types and their differences, please see\n # the online documentation.\n #\n # For more information, please see the online documentation at:\n #\n # https://www.nomadproject.io/docs/jobspec/schedulers.html\n #\n type = \"service\"\n\n update {\n # The \"max_parallel\" parameter specifies the maximum number of updates to\n # perform in parallel. In this case, this specifies to update a single task\n # at a time.\n max_parallel = 0\n\n # The \"min_healthy_time\" parameter specifies the minimum time the allocation\n # must be in the healthy state before it is marked as healthy and unblocks\n # further allocations from being updated.\n min_healthy_time = \"10s\"\n\n # The \"healthy_deadline\" parameter specifies the deadline in which the\n # allocation must be marked as healthy after which the allocation is\n # automatically transitioned to unhealthy. Transitioning to unhealthy will\n # fail the deployment and potentially roll back the job if \"auto_revert\" is\n # set to true.\n healthy_deadline = \"3m\"\n\n # The \"progress_deadline\" parameter specifies the deadline in which an\n # allocation must be marked as healthy. The deadline begins when the first\n # allocation for the deployment is created and is reset whenever an allocation\n # as part of the deployment transitions to a healthy state. If no allocation\n # transitions to the healthy state before the progress deadline, the\n # deployment is marked as failed.\n progress_deadline = \"10m\"\n\n # The \"auto_revert\" parameter specifies if the job should auto-revert to the\n # last stable job on deployment failure. A job is marked as stable if all the\n # allocations as part of its deployment were marked healthy.\n auto_revert = false\n\n # The \"canary\" parameter specifies that changes to the job that would result\n # in destructive updates should create the specified number of canaries\n # without stopping any previous allocations. Once the operator determines the\n # canaries are healthy, they can be promoted which unblocks a rolling update\n # of the remaining allocations at a rate of \"max_parallel\".\n #\n # Further, setting \"canary\" equal to the count of the task group allows\n # blue/green deployments. When the job is updated, a full set of the new\n # version is deployed and upon promotion the old version is stopped.\n canary = 0\n }\n\n # The reschedule stanza specifies the group's rescheduling strategy. If\n # specified at the job level, the configuration will apply to all groups\n # within the job. If the reschedule stanza is present on both the job and the\n # group, they are merged with the group stanza taking the highest precedence\n # and then the job.\n reschedule {\n delay = \"30s\"\n delay_function = \"constant\"\n unlimited = true\n }\n\n # The \"group\" stanza defines a series of tasks that should be co-located on\n # the same Nomad client. Any task within a group will be placed on the same\n # client.\n #\n # For more information and examples on the \"group\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/group.html\n #\n group \"prod-group1-nginx\" {\n # The \"count\" parameter specifies the number of the task groups that should\n # be running under this group. This value must be non-negative and defaults\n # to 1.\n count = 1\n\n # https://www.nomadproject.io/docs/job-specification/volume\n \n volume \"prod-volume1-nginx\" {\n type = \"host\"\n read_only = false\n source = \"prod-volume-data1-1\"\n }\n \n\n # The restart stanza configures a tasks's behavior on task failure. Restarts\n # happen on the client that is running the task.\n #\n # https://www.nomadproject.io/docs/job-specification/restart\n #\n restart {\n interval = \"30m\"\n attempts = 40\n delay = \"15s\"\n mode = \"delay\"\n }\n\n # The \"task\" stanza creates an individual unit of work, such as a Docker\n # container, web application, or batch processing.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/task.html\n #\n task \"prod-task1-nginx\" {\n # The \"driver\" parameter specifies the task driver that should be used to\n # run the task.\n driver = \"docker\"\n\n # The \"config\" stanza specifies the driver configuration, which is passed\n # directly to the driver to start the task. The details of configurations\n # are specific to each driver, so please see specific driver\n # documentation for more information.\n config {\n image = \"nginx:stable\"\n port_map {\n https = 443\n }\n privileged = false\n volumes = [\n \"/etc/ssl/certs/docs.nginx.service.consul.crt:/etc/ssl/certs/docs.nginx.service.consul.crt\",\n \"/etc/ssl/private/docs.nginx.service.consul.key:/etc/ssl/private/docs.nginx.service.consul.key\",\n \"/etc/ssl/certs/logs.nginx.service.consul.crt:/etc/ssl/certs/logs.nginx.service.consul.crt\",\n \"/etc/ssl/private/logs.nginx.service.consul.key:/etc/ssl/private/logs.nginx.service.consul.key\",\n \"custom/upstream.conf:/etc/nginx/conf.d/upstream.conf\",\n \"custom/logs.conf:/etc/nginx/conf.d/logs.conf\",\n \"custom/docs.conf:/etc/nginx/conf.d/docs.conf\"\n ]\n }\n\n # The \"template\" stanza instructs Nomad to manage a template, such as\n # a configuration file or script. This template can optionally pull data\n # from Consul or Vault to populate runtime configuration data.\n #\n # For more information and examples on the \"template\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/template.html\n #\n template {\n data = \u003c\u003cEOH\n upstream storage {\n {{ range service \"storage\" }}\n server {{ .Address }}:{{ .Port }};\n {{ end }}\n }\n EOH\n destination = \"custom/upstream.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl default_server;\n server_name logs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/logs.nginx.service.consul.crt;\n ssl_certificate_key /etc/ssl/private/logs.nginx.service.consul.key;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/;\n server_name_in_redirect off;\n }\n location ~ (.*html.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/html;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*txt.gz|.*log.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type text/plain;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n location ~ (.*xml.gz)$ {\n add_header Content-Encoding gzip;\n add_header Content-Type application/xml;\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/logs.fd.io/$1;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/logs.conf\"\n }\n template {\n data = \u003c\u003cEOH\n server {\n listen 443 ssl;\n server_name docs.nginx.service.consul;\n keepalive_timeout 70;\n ssl_session_cache shared:SSL:10m;\n ssl_session_timeout 10m;\n ssl_protocols TLSv1.2;\n ssl_prefer_server_ciphers on;\n ssl_ciphers \"ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384\";\n ssl_certificate /etc/ssl/certs/docs.nginx.service.consul.crt;\n ssl_certificate_key /etc/ssl/private/docs.nginx.service.consul.key;\n location / {\n chunked_transfer_encoding off;\n proxy_connect_timeout 300;\n proxy_http_version 1.1;\n proxy_set_header Host $host:$server_port;\n proxy_set_header Connection \"\";\n proxy_pass http://storage/docs.fd.io/;\n server_name_in_redirect off;\n }\n }\n EOH\n destination = \"custom/docs.conf\"\n }\n\n # The service stanza instructs Nomad to register a service with Consul.\n #\n # For more information and examples on the \"task\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/service.html\n #\n service {\n name = \"nginx\"\n port = \"https\"\n tags = [ \"docs\", \"logs\" ]\n }\n\n # The \"resources\" stanza describes the requirements a task needs to\n # execute. Resource requirements include memory, network, cpu, and more.\n # This ensures the task will execute on a machine that contains enough\n # resource capacity.\n #\n # For more information and examples on the \"resources\" stanza, please see\n # the online documentation at:\n #\n # https://www.nomadproject.io/docs/job-specification/resources.html\n #\n resources {\n cpu = 2000\n memory = 4096\n network {\n mode = \"bridge\"\n port \"https\" {\n static = 443\n }\n }\n }\n }\n }\n}",
"json": null,
- "modify_index": "8219998",
+ "modify_index": "8220180",
"name": "prod-nginx",
"namespace": "default",
"policy_override": null,
Code Review / csit.git / commitdiff