intf_state = {"up": "true",
"down": "false"}
- path = ("interfaces", ("interface", "name", str(interface)), "enabled")
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, intf_state[state.lower()])
+ intf = interface.replace("/", "%2F")
+ path = "/interface/{0}".format(intf)
+
+ status_code, resp = HcUtil.\
+ get_honeycomb_data(node, "config_vpp_interfaces", path)
+ if status_code != HTTPCodes.OK:
+ raise HoneycombError(
+ "Not possible to get configuration information about the "
+ "interfaces. Status code: {0}.".format(status_code))
+
+ resp["interface"][0]["enabled"] = intf_state[state.lower()]
+
+ status_code, resp = HcUtil. \
+ put_honeycomb_data(node, "config_vpp_interfaces", resp, path,
+ data_representation=DataRepresentation.JSON)
+ if status_code != HTTPCodes.OK:
+ raise HoneycombError(
+ "The configuration of interface '{0}' was not successful. "
+ "Status code: {1}.".format(interface, status_code))
+ return resp
@staticmethod
def set_interface_up(node, interface):
"The configuration of interface '{0}' was not successful. "
"Status code: {1}.".format(interface, status_code))
return resp
+
+ @staticmethod
+ def create_pbb_sub_interface(node, intf, sub_if_id, params):
+ """Creates a PBB sub-interface on the given interface and sets its
+ parameters.
+
+ :param node: Honeycomb node.
+ :param intf: The interface where PBB sub-interface will be configured.
+ :param sub_if_id: Sub-interface ID.
+ :param params: Configuration parameters of the sub-interface to be
+ created.
+ :type node: dict
+ :type intf: str
+ :type sub_if_id: str or int
+ :type params: dict
+ :return: Content of response.
+ :rtype: bytearray
+ :raises HoneycombError: If the configuration of sub-interface is not
+ successful.
+ """
+
+ interface = intf.replace("/", "%2F")
+ path = "/interface/{0}/sub-interfaces:sub-interfaces/sub-interface/" \
+ "{1}".format(interface, sub_if_id)
+ status_code, resp = HcUtil. \
+ put_honeycomb_data(node, "config_vpp_interfaces", params, path,
+ data_representation=DataRepresentation.JSON)
+ if status_code != HTTPCodes.OK:
+ raise HoneycombError(
+ "The configuration of PBB sub-interface '{0}' was not "
+ "successful. Status code: {1}.".format(intf, status_code))
+ return resp
+
+ @staticmethod
+ def delete_pbb_sub_interface(node, intf, sub_if_id):
+ """Deletes the given PBB sub-interface.
+
+ :param node: Honeycomb node.
+ :param intf: The interface where PBB sub-interface will be deleted.
+ :param sub_if_id: ID of the PBB sub-interface to be deleted.
+ :type node: dict
+ :type intf: str
+ :type sub_if_id: str or int
+ :return: Content of response.
+ :rtype: bytearray
+ :raises HoneycombError: If the removal of sub-interface is not
+ successful.
+ """
+
+ interface = intf.replace("/", "%2F")
+ path = "/interface/{0}/sub-interfaces:sub-interfaces/sub-interface/" \
+ "{1}".format(interface, sub_if_id)
+
+ status_code, resp = HcUtil. \
+ delete_honeycomb_data(node, "config_vpp_interfaces", path)
+ if status_code != HTTPCodes.OK:
+ raise HoneycombError(
+ "The removal of pbb sub-interface '{0}' was not successful. "
+ "Status code: {1}.".format(intf, status_code))
+ return resp
+
+ @staticmethod
+ def get_pbb_sub_interface_oper_data(node, intf, sub_if_id):
+ """Retrieves PBB sub-interface operational data from Honeycomb.
+
+ :param node: Honeycomb node.
+ :param intf: The interface where PBB sub-interface is located.
+ :param sub_if_id: ID of the PBB sub-interface.
+ :type node: dict
+ :type intf: str
+ :type sub_if_id: str or int
+ :return: PBB sub-interface operational data.
+ :rtype: dict
+ :raises HoneycombError: If the removal of sub-interface is not
+ successful.
+ """
+
+ interface = "{0}.{1}".format(intf, sub_if_id)
+ return InterfaceKeywords.get_interface_oper_data(node, interface)
base_path = HoneycombUtil.read_path_from_url_file(url_file)
path = base_path + path
+ logger.trace(path)
return HTTPRequest.put(node=node, path=path, headers=header,
payload=data)
--- /dev/null
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords
+| ... | WITH NAME | IfAPI
+
+*** Keywords ***
+| Honeycomb Creates PBB Sub Interface
+| | [Documentation] | Uses Honeycomb API to set PBB sub-interface on an\
+| | ... | interface.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - super_if - Super-interface. Type: string
+| | ... | - sub_if_id - Sub-interface ID. Type: string
+| | ... | - params - Parameters of the sub-interface to be created.
+| | ... | Type - dictionary
+| | ...
+| | ... | *Example:*
+| | ... | \| Honeycomb creates PBB sub interface \| ${node} \| ${super_if}\
+| | ... | \| ${cfg_pbb_sub_if_1_ID} \| ${cfg_pbb_sub_if_1} \|
+| | ...
+| | [Arguments] | ${node} | ${super_if} | ${sub_if_id} | ${params}
+| | ...
+| | IfAPI.Set Interface Up | ${node} | ${super_if}
+| | IfAPI.Create PBB Sub Interface
+| | ... | ${node} | ${super_if} | ${sub_if_id} | ${params}
+
+| Honeycomb Removes PBB Sub Interface
+| | [Documentation] | Uses Honeycomb API to remove PBB sub-interface from its\
+| | ... | super interface.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - super_if - Super-interface. Type: string
+| | ... | - sub_if_id - Sub-interface ID. Type: string
+| | ...
+| | ... | *Example:*
+| | ... | \| Honeycomb Removes PBB sub interface\
+| | ... | \| ${node} \| ${super_if} \| ${cfg_pbb_sub_if_1_ID} \|
+| | ...
+| | [Arguments] | ${node} | ${super_if} | ${sub_if_id}
+| | ...
+| | Delete PBB Sub Interface | ${node} | ${super_if} | ${sub_if_id}
+
+| PBB Sub Interface Operational Data From Honeycomb Should Be
+| | [Documentation] | Retrieves PBB sub-interface operational data from
+| | ... | Honeycomb and compares with expected configuration.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - super_if - Super-interface. Type: string
+| | ... | - sub_if_id - Sub-interface ID. Type: string
+| | ... | - expected_params - Expected operational data. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ... | \| PBB sub interface operational data from Honeycomb should be\
+| | ... | \| ${node} \| ${super_if} \| ${cfg_pbb_sub_if_1_ID}\
+| | ... | \| ${oper_pbb_sub_if_1} \|
+| | ...
+| | [Arguments] | ${node} | ${super_if} | ${sub_if_id} | ${expected_params}
+| | ...
+| | ${data}= | IfAPI.Get PBB Sub Interface Oper Data
+| | ... | ${node} | ${super_if} | ${sub_if_id}
+| | Compare data structures | ${data} | ${expected_params}
+
+| PBB Sub Interface Operational Data From Honeycomb Should Be Empty
+| | [Documentation] | Retrieves interface BPP configuration from Honeycomb,\
+| | ... | and expects an empty dictionary.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - super_if - Super-interface. Type: string
+| | ... | - sub_if_id - Sub-interface ID. Type: string
+| | ...
+| | ... | *Example:*
+| | ... | \| PBB sub interface operational data from Honeycomb should be empty\
+| | ... | \| ${node} \| ${super_if} \| ${cfg_pbb_sub_if_1_ID} \|
+| | ...
+| | [Arguments] | ${node} | ${super_if} | ${sub_if_id}
+| | ...
+| | ${data}= | IfAPI.Get PBB Sub Interface Oper Data
+| | ... | ${node} | ${super_if} | ${sub_if_id}
+| | Should be empty | ${data}
+
+| Honeycomb Fails to Create PBB Sub Interface
+| | [Documentation] | Uses Honeycomb API to set PBB sub-interface with wrong\
+| | ... | parameter(s) and expects to fail.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - super_if - Super-interface. Type: string
+| | ... | - sub_if_id - Sub-interface ID. Type: string
+| | ... | - params - Parameters of the sub-interface to be created.
+| | ... | Type - dictionary
+| | ...
+| | ... | *Example:*
+| | ... | \| Honeycomb fails to create PBB sub interface\
+| | ... | \| ${node} \| ${super_if} \| ${cfg_pbb_sub_if_ID}\
+| | ... | \| ${cfg_pbb_sub_if_no_vlan_tag} \|
+| | ...
+| | [Arguments] | ${node} | ${super_if} | ${sub_if_id} | ${params}
+| | ...
+| | IfAPI.Set Interface Up | ${node} | ${super_if}
+| | Run keyword and expect error | *HoneycombError*not successful*code: *00.
+| | ... | IfAPI.Create PBB Sub Interface
+| | ... | ${node} | ${super_if} | ${sub_if_id} | ${params}
--- /dev/null
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Test variables for provider backbone bridge test suite."""
+
+# pylint: disable=invalid-name
+
+# Add pbb sub interface
+# Configuration data
+cfg_pbb_sub_if_1_ID = '1'
+cfg_pbb_sub_if_1 = {
+ "sub-interface": [
+ {
+ "identifier": cfg_pbb_sub_if_1_ID,
+ "vlan-type": "dot1ah-types:802dot1ah",
+ "enabled": "true",
+ "admin-status": "up",
+ "oper-status": "up",
+ "pbb": {
+ "source-address": "aa:aa:aa:aa:aa:ab",
+ "destination-address": "bb:bb:bb:bb:bb:bc",
+ "b-vlan-tag-vlan-id": "2223",
+ "i-tag-isid": "12"
+ },
+ }
+ ]
+}
+
+# Expected operational data:
+oper_pbb_sub_if_1 = {
+ 'admin-status': 'up',
+ 'ietf-ip:ipv4': {},
+ 'oper-status': 'up',
+ 'sub-interfaces:sub-interfaces': {},
+ 'type': 'iana-if-type:ethernetCsmacd',
+ 'v3po:ethernet': {
+ 'duplex': 'full',
+ 'mtu': 9216
+ }
+}
+
+# Modify pbb sub interface
+# Configuration data
+cfg_pbb_sub_if_1_ID = '2'
+cfg_pbb_sub_if_1_mod = {
+ "sub-interface": [
+ {
+ "identifier": cfg_pbb_sub_if_1_ID,
+ "vlan-type": "dot1ah-types:802dot1ah",
+ "enabled": "true",
+ "admin-status": "up",
+ "oper-status": "up",
+ "pbb": {
+ "source-address": "aa:aa:aa:aa:aa:de",
+ "destination-address": "bb:bb:bb:bb:bb:ed",
+ "b-vlan-tag-vlan-id": "2223",
+ "i-tag-isid": "12"
+ },
+ }
+ ]
+}
+
+# Expected operational data:
+oper_pbb_sub_if_1_mod = {
+ 'admin-status': 'up',
+ 'ietf-ip:ipv4': {},
+ 'oper-status': 'up',
+ 'sub-interfaces:sub-interfaces': {},
+ 'type': 'iana-if-type:ethernetCsmacd',
+ 'v3po:ethernet': {
+ 'duplex': 'full',
+ 'mtu': 9216
+ }
+}
+
+# Configuration data
+cfg_pbb_sub_if_2_ID = '3'
+cfg_pbb_sub_if_2 = {
+ "sub-interface": [
+ {
+ "identifier": cfg_pbb_sub_if_2_ID,
+ "vlan-type": "dot1ah-types:802dot1ah",
+ "enabled": "true",
+ "admin-status": "up",
+ "oper-status": "up",
+ "pbb": {
+ "source-address": "aa:aa:aa:aa:aa:cc",
+ "destination-address": "bb:bb:bb:bb:bb:dd",
+ "b-vlan-tag-vlan-id": "10",
+ "i-tag-isid": "20"
+ },
+ }
+ ]
+}
+
+# Expected operational data:
+oper_pbb_sub_if_2 = {
+ 'admin-status': 'up',
+ 'ietf-ip:ipv4': {},
+ 'oper-status': 'up',
+ 'sub-interfaces:sub-interfaces': {},
+ 'type': 'iana-if-type:ethernetCsmacd',
+ 'v3po:ethernet': {
+ 'duplex': 'full',
+ 'mtu': 9216
+ }
+}
+
+# Configuration data
+cfg_pbb_sub_if_3_ID = '4'
+cfg_pbb_sub_if_3 = {
+ "sub-interface": [
+ {
+ "identifier": cfg_pbb_sub_if_3_ID,
+ "vlan-type": "dot1ah-types:802dot1ah",
+ "enabled": "true",
+ "admin-status": "up",
+ "oper-status": "up",
+ "pbb": {
+ "source-address": "aa:aa:aa:aa:cc:aa",
+ "destination-address": "bb:bb:bb:bb:dd:bb",
+ "b-vlan-tag-vlan-id": "30",
+ "i-tag-isid": "40"
+ },
+ }
+ ]
+}
+
+# Expected operational data:
+oper_pbb_sub_if_3 = {
+ 'admin-status': 'up',
+ 'ietf-ip:ipv4': {},
+ 'oper-status': 'up',
+ 'sub-interfaces:sub-interfaces': {},
+ 'type': 'iana-if-type:ethernetCsmacd',
+ 'v3po:ethernet': {
+ 'duplex': 'full',
+ 'mtu': 9216
+ }
+}
+
+# Wrong configuration data
+# Wrong source-address
+cfg_pbb_sub_if_ID = '5'
+cfg_pbb_sub_if_wrong_src_addr = {
+ "sub-interface": [
+ {
+ "identifier": cfg_pbb_sub_if_ID,
+ "vlan-type": "dot1ah-types:802dot1ah",
+ "enabled": "true",
+ "admin-status": "up",
+ "oper-status": "up",
+ "pbb": {
+ "source-address": "ab:cd:ef:gh:ij",
+ "destination-address": "bb:bb:bb:bb:bb:bc",
+ "b-vlan-tag-vlan-id": "2223",
+ "i-tag-isid": "12"
+ },
+ }
+ ]
+}
+
+# Wrong destination-address
+cfg_pbb_sub_if_wrong_dst_addr = {
+ "sub-interface": [
+ {
+ "identifier": cfg_pbb_sub_if_ID,
+ "vlan-type": "dot1ah-types:802dot1ah",
+ "enabled": "true",
+ "admin-status": "up",
+ "oper-status": "up",
+ "pbb": {
+ "source-address": "aa:aa:aa:aa:aa:ab",
+ "destination-address": "ab:cd:ef:gh:ij",
+ "b-vlan-tag-vlan-id": "2223",
+ "i-tag-isid": "12"
+ },
+ }
+ ]
+}
+
+# Wrong b-vlan-tag-vlan-id
+cfg_pbb_sub_if_wrong_vlan_tag = {
+ "sub-interface": [
+ {
+ "identifier": cfg_pbb_sub_if_ID,
+ "vlan-type": "dot1ah-types:802dot1ah",
+ "enabled": "true",
+ "admin-status": "up",
+ "oper-status": "up",
+ "pbb": {
+ "source-address": "aa:aa:aa:aa:aa:ab",
+ "destination-address": "bb:bb:bb:bb:bb:bc",
+ "b-vlan-tag-vlan-id": "123456789",
+ "i-tag-isid": "12"
+ },
+ }
+ ]
+}
+
+# Wrong i-tag-isid
+cfg_pbb_sub_if_wrong_i_tag = {
+ "sub-interface": [
+ {
+ "identifier": cfg_pbb_sub_if_ID,
+ "vlan-type": "dot1ah-types:802dot1ah",
+ "enabled": "true",
+ "admin-status": "up",
+ "oper-status": "up",
+ "pbb": {
+ "source-address": "aa:aa:aa:aa:aa:ab",
+ "destination-address": "bb:bb:bb:bb:bb:bc",
+ "b-vlan-tag-vlan-id": "2223",
+ "i-tag-isid": "167772152345"
+ },
+ }
+ ]
+}
+
+# b-vlan-tag-vlan-id is missing
+cfg_pbb_sub_if_no_vlan_tag = {
+ "sub-interface": [
+ {
+ "identifier": cfg_pbb_sub_if_ID,
+ "vlan-type": "dot1ah-types:802dot1ah",
+ "enabled": "true",
+ "admin-status": "up",
+ "oper-status": "up",
+ "pbb": {
+ "source-address": "aa:aa:aa:aa:aa:ab",
+ "destination-address": "bb:bb:bb:bb:bb:bc",
+ "i-tag-isid": "12"
+ },
+ }
+ ]
+}
--- /dev/null
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Variables***
+| ${super_if}= | ${node['interfaces']['port1']['name']}
+
+*** Settings ***
+| Resource | resources/libraries/robot/honeycomb/provider_backbone_bridge.robot
+| Variables | resources/test_data/honeycomb/pbb/pbb.py
+| Documentation | *Honeycomb provider backbone bridge test suite.*
+| Suite Teardown | Run Keyword If Any Tests Failed
+| ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
+| Force Tags | honeycomb_sanity
+
+*** Test Cases ***
+| TC01: Honeycomb sets PBB sub-interface
+| | [Documentation] | Honeycomb creates a new PBB sub-interface and checks its\
+| | ... | operational data.
+| | ...
+| | Given PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_1_ID}
+| | When Honeycomb creates PBB sub interface | ${node} | ${super_if}
+| | ... | ${cfg_pbb_sub_if_1_ID} | ${cfg_pbb_sub_if_1}
+| | Then PBB sub interface operational data from Honeycomb should be
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_1_ID} | ${oper_pbb_sub_if_1}
+
+| TC02: Honeycomb modifies existing PBB sub-interface
+| | [Documentation] | Honeycomb modifies an existing PBB sub-interface and\
+| | ... | checks its operational data.
+| | ...
+| | Given PBB sub interface operational data from Honeycomb should be
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_1_ID} | ${oper_pbb_sub_if_1}
+| | When Honeycomb creates PBB sub interface | ${node} | ${super_if}
+| | ... | ${cfg_pbb_sub_if_1_ID} | ${cfg_pbb_sub_if_1_mod}
+| | Then PBB sub interface operational data from Honeycomb should be
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_1_ID}
+| | ... | ${oper_pbb_sub_if_1_mod}
+
+| TC03: Honeycomb deletes existing PBB sub-interface
+| | [Documentation] | Honeycomb deletes an existing PBB sub-interface and\
+| | ... | checks operational data.
+| | ...
+| | Given PBB sub interface operational data from Honeycomb should be
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_1_ID}
+| | ... | ${oper_pbb_sub_if_1_mod}
+| | When Honeycomb Removes PBB sub interface
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_1_ID}
+| | Given PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_1_ID}
+
+| TC04: Honeycomb creates two PBB sub-interface
+| | [Documentation] | Honeycomb creates two PBB sub-interfaces on the same\
+| | ... | super interface and checks their operational data.
+| | ...
+| | Given PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_2_ID}
+| | And PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_3_ID}
+| | When Honeycomb creates PBB sub interface | ${node} | ${super_if}
+| | ... | ${cfg_pbb_sub_if_2_ID} | ${cfg_pbb_sub_if_2}
+| | And Honeycomb creates PBB sub interface | ${node} | ${super_if}
+| | ... | ${cfg_pbb_sub_if_3_ID} | ${cfg_pbb_sub_if_3}
+| | Then PBB sub interface operational data from Honeycomb should be
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_2_ID} | ${oper_pbb_sub_if_2}
+| | And PBB sub interface operational data from Honeycomb should be
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_3_ID} | ${oper_pbb_sub_if_3}
+
+| TC05: Honeycomb fails to set wrong destination-address for new PBB sub-interface
+| | [Documentation] | Honeycomb fails to create a new PBB sub-interface with\
+| | ... | wrong value of parameter destination-address, type yang:mac-address.
+| | ...
+| | Given PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_ID}
+| | When Honeycomb fails to create PBB sub interface | ${node} | ${super_if}
+| | ... | ${cfg_pbb_sub_if_ID} | ${cfg_pbb_sub_if_wrong_dst_addr}
+| | Then PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_ID}
+
+| TC06: Honeycomb fails to set wrong source-address for new PBB sub-interface
+| | [Documentation] | Honeycomb fails to create a new PBB sub-interface with\
+| | ... | wrong value of parameter source-address, type yang:mac-address.
+| | ...
+| | Given PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_ID}
+| | When Honeycomb fails to create PBB sub interface | ${node} | ${super_if}
+| | ... | ${cfg_pbb_sub_if_ID} | ${cfg_pbb_sub_if_wrong_src_addr}
+| | Then PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_ID}
+
+| TC07: Honeycomb fails to set wrong b-vlan-tag-vlan-id for new PBB sub-interface
+| | [Documentation] | Honeycomb fails to create a new PBB sub-interface with\
+| | ... | wrong value of parameter b-vlan-tag-vlan-id, type uint16, 12 bit\
+| | ... | range, range "1..4095".
+| | ...
+| | Given PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_ID}
+| | When Honeycomb fails to create PBB sub interface | ${node} | ${super_if}
+| | ... | ${cfg_pbb_sub_if_ID} | ${cfg_pbb_sub_if_wrong_vlan_tag}
+| | Then PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_ID}
+
+| TC08: Honeycomb fails to set wrong i-tag-isid for new PBB sub-interface
+| | [Documentation] | Honeycomb fails to create a new PBB sub-interface with\
+| | ... | wrong value of parameter i-tag-isid, type uint32, 24 bit range,\
+| | ... | range "1..16777215".
+| | ...
+| | Given PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_ID}
+| | When Honeycomb fails to create PBB sub interface | ${node} | ${super_if}
+| | ... | ${cfg_pbb_sub_if_ID} | ${cfg_pbb_sub_if_wrong_i_tag}
+| | Then PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_ID}
+
+| TC07: Honeycomb fails to create new PBB sub-interface without vlan tag
+| | [Documentation] | Honeycomb fails to create a new PBB sub-interface without\
+| | ... | parameter b-vlan-tag-vlan-id.
+| | ...
+| | Given PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_ID}
+| | When Honeycomb fails to create PBB sub interface | ${node} | ${super_if}
+| | ... | ${cfg_pbb_sub_if_ID} | ${cfg_pbb_sub_if_no_vlan_tag}
+| | Then PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_ID}
Code Review / csit.git / commitdiff