+ All suites and tests still refer to MRR instead of BMRR (or FRMOBL).
+ API change: Traffic should pass with maximum rate
first argument got a default value,
thus it needs to be moved towards the end of argument list.
+ Consequently, the value for it has been deleted from suites.
+ Test message is now compatible only with BMRR parsing.
- Reporting of transmit rate is left as TODO.
+ Global test __init__ with new way of giving defaults to global variables.
+ The new keyword is put into robot_enhancements.robot resource.
+ Number of trials and trial duration are now configurable.
- Bootstrap scripts have no support for overriding the defaults yet.
Change-Id: I4b108cc9c256730e62c03fbacba0a1c314f8ae88
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
| | ... | ${\n}LOSS_ACCEPTANCE: ${loss_acceptance} ${loss_acceptance_type}
| | ... | append=yes
-| Display raw results
-| | [Documentation]
-| | ... | Display raw results from TG in total received/send packets over trial
-| | ... | duration in seconds.
-| | ...
-| | ... | *Arguments:*
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
-| | ... | - results - Measured results. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Display raw results \| 64 \| results \|
-| | ...
-| | [Arguments] | ${framesize} | ${results}
-| | ...
-| | ${framesize}= | Get Frame Size | ${framesize}
-| | @{tokens}= | Split String | ${results} | ,
-| | @{received}= | Split String | @{tokens}[1] | =
-| | @{sent}= | Split String | @{tokens}[2] | =
-| | ${total_received} = | Set Variable | @{received}[1]
-| | ${total_sent} = | Set Variable | @{sent}[1]
-| | Set Test Message | MaxReceivedRate_Results [pkts/${perf_trial_duration}sec]:
-| | Set Test Message | tx ${total_sent}, rx ${total_received} | append=yes
-
| Measure latency pps
| | [Documentation]
| | ... | Send traffic at specified rate. Measure min/avg/max latency
| | ... | Send traffic at maximum rate.
| | ...
| | ... | *Arguments:*
-| | ... | - duration - Duration of traffic run [s]. Type: integer
| | ... | - rate - Rate for sending packets. Type: string
| | ... | - framesize - L2 Frame Size [B] or IMIX_v4_1. Type: integer/string
| | ... | - topology_type - Topology type. Type: string
-| | ... | Type: boolean
+| | ... | - subsamples - How many trials in this measurement. Type:int
+| | ... | - trial_duration - Duration of single trial [s]. Type: float
+| | ... | - fail_no_traffic - Whether to fail on zero receive count. Type: boolean
| | ...
| | ... | *Example:*
| | ...
-| | ... | \| Traffic should pass with maximum rate \| 10 \| 4.0mpps \| 64 \
-| | ... | \| 3-node-IPv4 \|
+| | ... | \| Traffic should pass with maximum rate \| 4.0mpps \| 64 \
+| | ... | \| 3-node-IPv4 \| ${1} \| ${10.0} | ${False}
| | ...
-| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type}
-| | ... | ${fail_no_traffic}=${True}
+| | [Arguments] | ${rate} | ${framesize} | ${topology_type}
+| | ... | ${trial_duration}=${perf_trial_duration} | ${fail_no_traffic}=${True}
+| | ... | ${subsamples}=${perf_trial_multiplicity}
| | ...
-| | ${results}= | Send traffic at specified rate | ${duration} | ${rate}
-| | ... | ${framesize} | ${topology_type}
-| | Display raw results | ${framesize} | ${results}
+| | ${results} = | Send traffic at specified rate | ${trial_duration} | ${rate}
+| | ... | ${framesize} | ${topology_type} | ${subsamples}
+| | Set Test Message | ${\n}Maximum Receive Rate trial results
+| | Set Test Message | in packets per second: ${results}
+| | ... | append=yes
+| | # TODO: Should we also report the percentage relative to transmit rate,
+| | # so that people looking at console can decide how close to 100% it is?
| | Run Keyword If | ${fail_no_traffic} | Fail if no traffic forwarded
| Send traffic at specified rate
| | [Documentation]
| | ... | Send traffic at specified rate.
+| | ... | Return list of measured receive rates.
| | ...
| | ... | *Arguments:*
-| | ... | - duration - Duration of traffic run [s]. Type: integer
+| | ... | - trial_duration - Duration of single trial [s]. Type: float
| | ... | - rate - Rate for sending packets. Type: string
| | ... | - framesize - L2 Frame Size [B]. Type: integer/string
| | ... | - topology_type - Topology type. Type: string
-| | ... | Type: boolean
+| | ... | - subsamples - How many trials in this measurement. Type: int
| | ...
| | ... | *Example:*
| | ...
-| | ... | \| Send traffic at specific rate \| 10 \| 4.0mpps \| 64 \
-| | ... | \| 3-node-IPv4 \|
+| | ... | \| Send traffic at specified rate \| ${1.0} \| 4.0mpps \| 64 \
+| | ... | \| 3-node-IPv4 \| ${10}
| | ...
-| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type}
+| | [Arguments] | ${trial_duration} | ${rate} | ${framesize}
+| | ... | ${topology_type} | ${subsamples}=${1}
| | ...
-| | Clear and show runtime counters with running traffic | ${duration}
+| | Clear and show runtime counters with running traffic | ${trial_duration}
| | ... | ${rate} | ${framesize} | ${topology_type}
| | Run Keyword If | ${dut_stats}==${True} | Clear all counters on all DUTs
| | Run Keyword If | ${dut_stats}==${True} and ${pkt_trace}==${True}
| | ... | VPP Enable Traces On All DUTs | ${nodes}
-| | ${results} = | Send traffic on tg | ${duration} | ${rate} | ${framesize}
-| | ... | ${topology_type} | warmup_time=0
-| | Run Keyword If | ${dut_stats}==${True} | Show statistics on all DUTs | ${nodes}
+| | ${results} = | Create List
+| | :FOR | ${i} | IN RANGE | ${subsamples}
+| | | Send traffic on tg | ${trial_duration} | ${rate} | ${framesize}
+| | | ... | ${topology_type} | warmup_time=0
+| | | ${rx} = | Get Received
+| | | ${rr} = | Evaluate | ${rx} / ${trial_duration}
+| | | Append To List | ${results} | ${rr}
+| | Run Keyword If | ${dut_stats}==${True} | Show statistics on all DUTs
+| | ... | ${nodes}
| | Run Keyword If | ${dut_stats}==${True} and ${pkt_trace}==${True}
| | ... | Show Packet Trace On All Duts | ${nodes} | maximum=${100}
| | Return From Keyword | ${results}
--- /dev/null
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Documentation
+| ... | Place to store general keywords, similar to ones in BuiltIn library.
+| Library | OperatingSystem
+| Library | String
+
+*** Keywords ***
+| Ensure Global Variable
+| | [Documentation] | Give default value (from environment or code) to variable.
+| | ...
+| | ... | Ideally we would just use Variables table to set global variables.
+| | ... | Unfortunately, __init__ files are special (among other things)
+| | ... | by the fact that variables set in the table are not available
+| | ... | for (sub)directory suites.
+| | ... | Therefore we are using BuiltIn.Set_Global_Variable explicitly.
+| | ... | While we are running code here, we allow environment variables
+| | ... | to override the default values.
+| | ... | If environment variable name is not specified (or empty),
+| | ... | the upper case of the variable name is used, prefixed by "CSIT_".
+| | ... | The --variable parameter to pybot takes precedence to environment.
+| | ...
+| | ... | *Arguments:*
+| | ... | - variable_name - Name of global variable to set. Type: string
+| | ... | - default_value - Value to set if not set otherwise. Type: string
+| | ... | - env_var_name - Name of environment variable to read. Type: string
+| | ... | - application - Prefix for default environment variable. Type: string
+| | ...
+| | ... | *Example:*
+| | ... | \| Ensure Global Variable \| perf_trial_duration \| 10.0 \| TRIAL_DUR
+| | ...
+| | [Arguments] | ${variable_name} | ${default_value} | ${env_var_name}=${EMPTY}
+| | ... | ${application}=CSIT
+| | ...
+| | ${env_var_length} = | Get Length | ${env_var_name}
+| | ${default_env_var} = | Convert To Uppercase | ${variable_name}
+| | ${env_var} = | Set Variable If | ${env_var_length}
+| | ... | ${env_var_name} | ${application}_${default_env_var}
+| | ${updated_default} = | Get Environment Variable
+| | ... | ${env_var} | ${default_value}
+| | ${final_value} = | Get Variable Value
+| | ... | \${${variable_name}} | ${updated_default}
+| | Set Global Variable | \${${variable_name}} | ${final_value}
REGEX_MRR = re.compile(r'MaxReceivedRate_Results\s\[pkts/(\d*)sec\]:\s'
r'tx\s(\d*),\srx\s(\d*)')
- REGEX_BMRR = re.compile(r'Maximum Receive Rate Results \[(.*)\]')
+ REGEX_BMRR = re.compile(r'Maximum Receive Rate trial results'
+ r' in packets per second: \[(.*)\]')
REGEX_TC_TAG = re.compile(r'\d+[tT]\d+[cC]')
--- /dev/null
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Documentation | Set global variables common to all tests.
+| Resource | resources/libraries/robot/robot_enhancements.robot
+| Suite Setup | Set Common Variables
+
+*** Keywords ***
+| Set Common Variables
+| | [Documentation] | Set the following global variables.
+| | ...
+| | ... | While currently only MRR tests are using the values,
+| | ... | any new test might decide to use them,
+| | ... | so variable names are generic for "perf" scope.
+| | ...
+| | ... | perf_trial_multiplicity - Number of trials to execute in MRR test.
+| | ... | perf_trial_duration - Duration of one trial in MRR test.
+| | ...
+| | Ensure Global Variable | perf_trial_multiplicity | 1
+| | Ensure Global Variable | perf_trial_duration | 10
| | ... | ${get_framesize} < ${1522} | no | yes
| | ...
| | Given Start L2FWD on all DUTs | ${wt} | ${rxq} | ${jumbo_frames}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${get_framesize} < ${1522} | no | yes
| | ...
| | Given Start L3FWD on all DUTs | ${wt} | ${rxq} | ${jumbo_frames}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${get_framesize} < ${1522} | no | yes
| | ...
| | Given Start L2FWD on all DUTs | ${wt} | ${rxq} | ${jumbo_frames}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${get_framesize} < ${1522} | no | yes
| | ...
| | Given Start L2FWD on all DUTs | ${wt} | ${rxq} | ${jumbo_frames}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2018 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| | ... | Setup suite Variables. Variables are used across performance testing.
| | ...
| | ... | _NOTE:_ This KW sets following suite variables:
-| | ... | - perf_trial_duration - Duration of traffic run [s].
| | ... | - perf_pdr_loss_acceptance - Loss acceptance treshold
| | ... | - perf_pdr_loss_acceptance_type - Loss acceptance treshold type
| | ... | - perf_vm_image - Guest VM disk image
| | ... | - pkt_trace - Switch to enable packet trace for test
| | ... | - dut_stats - Switch to enable DUT statistics
| | ...
-| | Set Global Variable | ${perf_trial_duration} | 10
| | Set Global Variable | ${perf_pdr_loss_acceptance} | 0.5
| | Set Global Variable | ${perf_pdr_loss_acceptance_type} | percentage
| | Set Global Variable | ${perf_vm_image} | /var/lib/vm/csit-nested-1.7.img
-# Copyright (c) 2017 Cisco and/or its affiliates.
+# Copyright (c) 2018 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| | ... | Setup suite Variables. Variables are used across performance testing.
| | ...
| | ... | _NOTE:_ This KW sets following suite variables:
-| | ... | - perf_trial_duration - Duration of traffic run [s]
| | ... | - perf_pdr_loss_acceptance - Loss acceptance treshold
| | ... | - perf_pdr_loss_acceptance_type - Loss acceptance treshold type
| | ... | - pkt_trace - Switch to enable packet trace for test
| | ... | - uio_driver - Default UIO driver
| | ... | - plugins_to_enable - List of plugins to be enabled for test
| | ...
-| | Set Global Variable | ${perf_trial_duration} | 10
| | Set Global Variable | ${perf_pdr_loss_acceptance} | 0.5
| | Set Global Variable | ${perf_pdr_loss_acceptance_type} | percentage
| | Set Global Variable | ${pkt_trace} | ${False}
-# Copyright (c) 2017 Cisco and/or its affiliates.
+# Copyright (c) 2018 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| | ... | Setup suite Variables. Variables are used across performance testing.
| | ...
| | ... | _NOTE:_ This KW sets following suite variables:
-| | ... | - perf_trial_duration - Duration of traffic run [s]
| | ... | - perf_pdr_loss_acceptance - Loss acceptance treshold
| | ... | - perf_pdr_loss_acceptance_type - Loss acceptance treshold type
| | ... | - perf_vm_image - Guest VM disk image
| | ... | - uio_driver - Default UIO driver
| | ... | - plugins_to_enable - List of plugins to be enabled for test
| | ...
-| | Set Global Variable | ${perf_trial_duration} | 10
| | Set Global Variable | ${perf_pdr_loss_acceptance} | 0.5
| | Set Global Variable | ${perf_pdr_loss_acceptance_type} | percentage
| | Set Global Variable | ${perf_vm_image} | /var/lib/vm/csit-nested-1.7.img
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And Initialize L2 Bridge Domain for '1' memif pairs and '${rxq}' rxqueues in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | And Initialize L2 xconnect for single memif in 3-node circular topology
| | ... | ${rxq}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And Initialize L2 xconnect for '1' memif pairs and '${rxq}' rxqueues in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And Initialize L2 xconnect for '1' memif pairs and '${rxq}' rxqueues in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And Initialize L2 Bridge Domain for '1' memif pairs and '${rxq}' rxqueues in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | And Initialize L2 xconnect for single memif in 3-node circular topology
| | ... | ${rxq}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And Initialize L2 xconnect for '1' memif pairs and '${rxq}' rxqueues in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And Initialize L2 xconnect for '1' memif pairs and '${rxq}' rxqueues in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And Initialize L2 Bridge Domain for '1' memif pairs and '${rxq}' rxqueues in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And Initialize L2 xconnect for '1' memif pairs and '${rxq}' rxqueues in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
| | And Set interfaces in path in 3-node circular topology up
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
| | And Set interfaces in path in 3-node circular topology up
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
| | And Set interfaces in path in 3-node circular topology up
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
| | And Set interfaces in path in 3-node circular topology up
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
| | And Set interfaces in path in 3-node circular topology up
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg}
| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
| | And Set interfaces in path in 3-node circular topology up
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ip4 | dst | 10.10.10.2
| | And Vpp Enable Input Acl Interface
| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv4 forwarding in 3-node circular topology
| | And Initialize IPv4 policer 2r3c-'ca' in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv4 forwarding in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv4 forwarding with scaling in 3-node circular topology
| | ... | ${rts_per_flow}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv4 forwarding with scaling in 3-node circular topology
| | ... | ${rts_per_flow}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv4 forwarding with scaling in 3-node circular topology
| | ... | ${rts_per_flow}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in 3-node circular topology
| | ${traffic_profile}= | Set Variable | trex-sl-3n-ethip4udp-10u1000p-conc
| | Set Test Variable | ${traffic_profile}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in 3-node circular topology
| | ${traffic_profile}= | Set Variable | trex-sl-3n-ethip4udp-10u1000p-conc
| | Set Test Variable | ${traffic_profile}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in 3-node circular topology
| | ${traffic_profile}= | Set Variable | trex-sl-3n-ethip4udp-10u1000p-conc
| | Set Test Variable | ${traffic_profile}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in 3-node circular topology
| | ${traffic_profile}= | Set Variable | trex-sl-3n-ethip4udp-10u1000p-conc
| | Set Test Variable | ${traffic_profile}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Add NAT to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize NAT44 in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Add NAT to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize NAT44 in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1
| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ip4 | dst | 10.10.10.2
| | And Vpp Enable Input Acl Interface
| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv4 forwarding in 3-node circular topology
| | And Initialize IPv4 policer 2r3c-'ca' in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv4 forwarding in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv4 forwarding with scaling in 3-node circular topology
| | ... | ${rts_per_flow}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv4 forwarding with scaling in 3-node circular topology
| | ... | ${rts_per_flow}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv4 forwarding with scaling in 3-node circular topology
| | ... | ${rts_per_flow}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in 3-node circular topology
| | ${traffic_profile}= | Set Variable | trex-sl-3n-ethip4udp-10u1000p-conc
| | Set Test Variable | ${traffic_profile}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in 3-node circular topology
| | ${traffic_profile}= | Set Variable | trex-sl-3n-ethip4udp-10u1000p-conc
| | Set Test Variable | ${traffic_profile}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in 3-node circular topology
| | ${traffic_profile}= | Set Variable | trex-sl-3n-ethip4udp-10u1000p-conc
| | Set Test Variable | ${traffic_profile}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in 3-node circular topology
| | ${traffic_profile}= | Set Variable | trex-sl-3n-ethip4udp-10u1000p-conc
| | Set Test Variable | ${traffic_profile}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Add NAT to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize NAT44 in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Add NAT to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize NAT44 in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv4 forwarding in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${dut2_if1} | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${dut2_if1} | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv6 forwarding in 3-node circular topology
| | And Initialize IPv6 iAcl whitelist in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And Initialize IPv6 forwarding in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv6 forwarding with scaling in 3-node circular topology
| | ... | ${rts_per_flow}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv6 forwarding with scaling in 3-node circular topology
| | ... | ${rts_per_flow}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv6 forwarding with scaling in 3-node circular topology
| | ... | ${rts_per_flow}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv6 forwarding in 3-node circular topology
| | And Initialize IPv6 iAcl whitelist in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And Initialize IPv6 forwarding in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv6 forwarding with scaling in 3-node circular topology
| | ... | ${rts_per_flow}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv6 forwarding with scaling in 3-node circular topology
| | ... | ${rts_per_flow}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv6 forwarding with scaling in 3-node circular topology
| | ... | ${rts_per_flow}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Add DPDK dev default TXD to all DUTs | 2048
| | And Apply startup configuration on all VPP DUTs
| | And Initialize IPv6 forwarding in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domains with VLAN dot1q sub-interfaces in a 3-node circular topology
| | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Connect interfaces and VLAN sub-interfaces using L2XC
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And Initialize L2 bridge domain in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domain in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domain in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domain in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And Initialize L2 xconnect in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domains with VLAN dot1q sub-interfaces in a 3-node circular topology
| | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Connect interfaces and VLAN sub-interfaces using L2XC
| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And Initialize L2 bridge domain in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domain in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domain in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domain in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | And Initialize L2 xconnect in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Add DPDK dev default TXD to all DUTs | 2048
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domain in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Add DPDK dev default TXD to all DUTs | 2048
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 xconnect in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
| | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv6 forwarding over SRv6 with encapsulation with '1' x SID 'with' decapsulation in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv6 forwarding over SRv6 with encapsulation with '2' x SID 'with' decapsulation in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv6 forwarding over SRv6 with encapsulation with '2' x SID 'without' decapsulation in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'dynamic_proxy' behaviour in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'masquerading' behaviour in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'static_proxy' behaviour in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
| | ... | jumbo_frames=${jumbo_frames}
| | And Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
| | ... | jumbo_frames=${jumbo_frames}
| | And Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | jumbo_frames=${jumbo_frames}
| | And Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
| | And All Vpp Interfaces Ready Wait | ${nodes}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | jumbo_frames=${jumbo_frames}
| | And Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
| | And All Vpp Interfaces Ready Wait | ${nodes}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
| | ... | jumbo_frames=${jumbo_frames}
| | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
| | ... | jumbo_frames=${jumbo_frames}
| | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
| | ... | jumbo_frames=${jumbo_frames}
| | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
| | ... | jumbo_frames=${jumbo_frames}
| | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domains with Vhost-User for '2' VMs in 3-node circular topology
| | And Configure '2' guest VMs with dpdk-testpmd connected via vhost-user in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
| | ... | jumbo_frames=${jumbo_frames}
| | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
| | ... | jumbo_frames=${jumbo_frames}
| | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 xconnect with Vhost-User for '2' in 3-node circular topology
| | And Configure '2' guest VMs with dpdk-testpmd connected via vhost-user in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
| | ... | ${dut2_vif2_mac} | jumbo_frames=${jumbo_frames}
| | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
| | ... | ${dut2_vif2_mac} | jumbo_frames=${jumbo_frames}
| | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv4 forwarding with vhost for '2' VMs in 3-node circular topology
| | And Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
| | ... | jumbo_frames=${jumbo_frames}
| | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
| | ... | jumbo_frames=${jumbo_frames}
| | And Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
| | ... | jumbo_frames=${jumbo_frames}
| | And Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | jumbo_frames=${jumbo_frames}
| | And Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
| | And All Vpp Interfaces Ready Wait | ${nodes}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | jumbo_frames=${jumbo_frames}
| | And Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
| | And All Vpp Interfaces Ready Wait | ${nodes}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
| | ... | jumbo_frames=${jumbo_frames}
| | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
| | ... | jumbo_frames=${jumbo_frames}
| | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
| | ... | jumbo_frames=${jumbo_frames}
| | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domains with Vhost-User for '2' VMs in 3-node circular topology
| | And Configure '2' guest VMs with dpdk-testpmd connected via vhost-user in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
| | ... | jumbo_frames=${jumbo_frames}
| | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
| | ... | jumbo_frames=${jumbo_frames}
| | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 xconnect with Vhost-User for '2' in 3-node circular topology
| | And Configure '2' guest VMs with dpdk-testpmd connected via vhost-user in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
| | ... | ${dut2_vif2_mac} | jumbo_frames=${jumbo_frames}
| | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
| | ... | ${dut2_vif2_mac} | jumbo_frames=${jumbo_frames}
| | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv4 forwarding with vhost for '2' VMs in 3-node circular topology
| | And Configure '2' guest VMs with dpdk-testpmd-mac connected via vhost-user in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
| | ... | jumbo_frames=${jumbo_frames}
| | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
| | ... | jumbo_frames=${jumbo_frames}
| | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
| | ... | jumbo_frames=${jumbo_frames}
| | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domains with Vhost-User for '2' VMs in 3-node circular topology
| | And Configure '2' guest VMs with dpdk-testpmd connected via vhost-user in 3-node circular topology
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
Code Review / csit.git / commitdiff