Update NDRCHK and PDRCHK rates

Change-Id: Ia51d29704d35e2c9f93dcbd1bccc355c9cf64419
Signed-off-by: Peter Mikus <pmikus@cisco.com>

diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot
index 8d88399..b92c436 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot
@@ -60,10 +60,10 @@
 | | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
 | | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify
 | | ... | ref-NDR for 64 Byte frames using single trial throughput test
-| | ... | at 2x 4.1mpps.
+| | ... | at 2x 4.0mpps.
 | | [Tags] | 64B | 1T1C | STHREAD
 | | ${framesize}= | Set Variable | ${64}
-| | ${rate}= | Set Variable | 4.1mpps
+| | ${rate}= | Set Variable | 4.0mpps
 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Add no multi seg to all DUTs

diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrchk.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrchk.robot
index 01dcedb..61ee13c 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrchk.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrchk.robot
@@ -107,10 +107,10 @@
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte
-| | ... | frames using single trial throughput test at 2x 10.4mpps.
+| | ... | frames using single trial throughput test at 2x 9.4mpps.
 | | [Tags] | 64B | 2T2C | MTHREAD
 | | ${framesize}= | Set Variable | ${64}
-| | ${rate}= | Set Variable | 10.4mpps
+| | ${rate}= | Set Variable | 9.4mpps
 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Add no multi seg to all DUTs

diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-pdrchk.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-pdrchk.robot
index 3c49d6b..b609c98 100644 (file)
--- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-pdrchk.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-pdrchk.robot
@@ -127,7 +127,7 @@
 | | [Tags] | 64B | 2T2C | STHREAD
 | | ...
 | | [Template] | Check PDR for IPv4 routing
-| | framesize=${64} | rate=7.4mpps | wt=2 | rxq=1
+| | framesize=${64} | rate=9.4mpps | wt=2 | rxq=1
 
 | tc05-1518B-2t2c-ethip4-ip4base-pdrchk
 | | [Documentation]

diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-ndrchk.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-ndrchk.robot
index a6f8c98..d4ab80e 100644 (file)
--- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-ndrchk.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-ndrchk.robot
@@ -104,10 +104,10 @@
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 78 Byte
-| | ... | frames using single trial throughput test at 2x 5.0mpps.
+| | ... | frames using single trial throughput test at 2x 4.4mpps.
 | | [Tags] | 78B | 2T2C | MTHREAD
 | | ${framesize}= | Set Variable | ${78}
-| | ${rate}= | Set Variable | 5.0mpps
+| | ${rate}= | Set Variable | 4.4mpps
 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Add no multi seg to all DUTs

diff --git a/tests/vpp/perf/l2/10ge2p1x520-dot1ad-l2xcbase-ndrchk.robot b/tests/vpp/perf/l2/10ge2p1x520-dot1ad-l2xcbase-ndrchk.robot
index 4b41625..3f4f0b2 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x520-dot1ad-l2xcbase-ndrchk.robot
+++ b/tests/vpp/perf/l2/10ge2p1x520-dot1ad-l2xcbase-ndrchk.robot
@@ -134,10 +134,10 @@
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC with 802.1ad config with 2 thread, 2 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte
-| | ... | frames using single trial throughput test at 2x 8.5mpps.
+| | ... | frames using single trial throughput test at 2x 8.2mpps.
 | | [Tags] | 64B | 2T2C | MTHREAD
 | | ${framesize}= | Set Variable | ${64}
-| | ${rate}= | Set Variable | 8.5mpps
+| | ${rate}= | Set Variable | 8.2mpps
 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Add no multi seg to all DUTs

diff --git a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-ndrchk.robot b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-ndrchk.robot
index d3a67f3..ae3f2d4 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-ndrchk.robot
+++ b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-ndrchk.robot
@@ -127,10 +127,10 @@
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte
-| | ... | frames using single trial throughput test at 2x 8.7mpps.
+| | ... | frames using single trial throughput test at 2x 8.1mpps.
 | | [Tags] | 64B | 2T2C | MTHREAD
 | | ${framesize}= | Set Variable | ${64}
-| | ${rate}= | Set Variable | 8.7mpps
+| | ${rate}= | Set Variable | 8.1mpps
 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Add no multi seg to all DUTs

diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-ndrchk.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-ndrchk.robot
index 598d45f..3512162 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-ndrchk.robot
+++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-ndrchk.robot
@@ -54,10 +54,10 @@
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte
-| | ... | frames using single trial throughput test at 2x 4.9mpps.
+| | ... | frames using single trial throughput test at 2x 4.0mpps.
 | | [Tags] | 64B | 1T1C | STHREAD
 | | ${framesize}= | Set Variable | ${64}
-| | ${rate}= | Set Variable | 4.9mpps
+| | ${rate}= | Set Variable | 4.0mpps
 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Add no multi seg to all DUTs
@@ -101,10 +101,10 @@
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte
-| | ... | frames using single trial throughput test at 2x 10.4mpps.
+| | ... | frames using single trial throughput test at 2x 9.4mpps.
 | | [Tags] | 64B | 2T2C | MTHREAD
 | | ${framesize}= | Set Variable | ${64}
-| | ${rate}= | Set Variable | 10.4mpps
+| | ${rate}= | Set Variable | 9.4mpps
 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Add no multi seg to all DUTs

diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-pdrchk.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-pdrchk.robot
index 5851239..257efc9 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-pdrchk.robot
+++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-pdrchk.robot
@@ -85,7 +85,7 @@
 | | [Tags] | 64B | 1T1C | STHREAD
 | | ...
 | | [Template] | Check PDR for L2 bridge domain
-| | framesize=${64} | rate=4.9mpps | wt=1 | rxq=1
+| | framesize=${64} | rate=4.0mpps | wt=1 | rxq=1
 
 | tc02-1518B-1t1c-eth-l2bdbasemaclrn-pdrchk
 | | [Documentation]
@@ -121,7 +121,7 @@
 | | [Tags] | 64B | 2T2C | MTHREAD
 | | ...
 | | [Template] | Check PDR for L2 bridge domain
-| | framesize=${64} | rate=10.4mpps | wt=2 | rxq=1
+| | framesize=${64} | rate=9.4mpps | wt=2 | rxq=1
 
 | tc05-1518B-2t2c-eth-l2bdbasemaclrn-pdrchk
 | | [Documentation]

diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-ndrchk.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-ndrchk.robot
index 13a2b75..115df06 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-ndrchk.robot
+++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-ndrchk.robot
@@ -54,10 +54,10 @@
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte
-| | ... | frames using single trial throughput test at 2x 5.9mpps.
+| | ... | frames using single trial throughput test at 2x 5.5mpps.
 | | [Tags] | 64B | 1T1C | STHREAD
 | | ${framesize}= | Set Variable | ${64}
-| | ${rate}= | Set Variable | 5.9mpps
+| | ${rate}= | Set Variable | 5.5mpps
 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
 | | And Add no multi seg to all DUTs

diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-pdrchk.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-pdrchk.robot
index 72589f6..85627f0 100644 (file)
--- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-pdrchk.robot
+++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-pdrchk.robot
@@ -85,7 +85,7 @@
 | | [Tags] | 64B | 1T1C | STHREAD
 | | ...
 | | [Template] | Check PDR for L2 xconnect
-| | framesize=${64} | rate=5.9mpps | wt=1 | rxq=1
+| | framesize=${64} | rate=5.5mpps | wt=1 | rxq=1
 
 | tc02-1518B-1t1c-eth-l2xcbase-pdrchk
 | | [Documentation]