From: Tibor Frank Date: Wed, 9 May 2018 09:26:04 +0000 (+0200) Subject: Report: remove greps X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=commitdiff_plain;h=4fbf1ec2d535d322725d395c369b6c9f7222c8dd Report: remove greps Change-Id: I57fee701a99bcdb4f523011fa774c42ecdacdde4 Signed-off-by: Tibor Frank --- diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst index cac2916d92..e604605ffc 100644 --- a/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst @@ -25,20 +25,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/container_memif - $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -58,17 +46,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/container_memif - $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst index 83181bf420..60e80cea83 100644 --- a/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst @@ -25,20 +25,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/kubernetes/perf/container_memif - $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -58,17 +46,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/kubernetes/perf/container_memif - $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ip4.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ip4.rst index d2ffc890fe..7ea8af4af8 100644 --- a/docs/report/vpp_performance_tests/packet_latency_graphs/ip4.rst +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ip4.rst @@ -24,20 +24,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPv4 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip4 - $ grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -56,17 +44,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPv4 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip4 - $ grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ip4_tunnels.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ip4_tunnels.rst index ad818ffbcf..c1482514ca 100644 --- a/docs/report/vpp_performance_tests/packet_latency_graphs/ip4_tunnels.rst +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ip4_tunnels.rst @@ -24,20 +24,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPv4 Overlay Tunnels.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip4_tunnels - $ grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -56,17 +44,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPv4 Overlay Tunnels.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip4_tunnels - $ grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ip6.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ip6.rst index c2e5102450..622813d763 100644 --- a/docs/report/vpp_performance_tests/packet_latency_graphs/ip6.rst +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ip6.rst @@ -24,20 +24,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPv6 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip6 - $ grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -56,17 +44,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPv6 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip6 - $ grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ip6_tunnels.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ip6_tunnels.rst index 4f8809bb8d..12d21f6bf3 100644 --- a/docs/report/vpp_performance_tests/packet_latency_graphs/ip6_tunnels.rst +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ip6_tunnels.rst @@ -24,20 +24,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPv6 Overlay Tunnels.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip6_tunnels - $ grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -56,18 +44,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPv6 Overlay Tunnels.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-2t2c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip6_tunnels - $ grep -E "78B-2t2c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" * - +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ipsec.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ipsec.rst index 952ec51e8c..0c8f3de767 100644 --- a/docs/report/vpp_performance_tests/packet_latency_graphs/ipsec.rst +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ipsec.rst @@ -28,20 +28,8 @@ below. *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPSec HW with IPv4 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/crypto - $ grep -E "64B-1t1c-.*ipsec.*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -60,17 +48,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPSec HW with IPv4 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/crypto - $ grep -E "64B-2t2c-.*ipsec.*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/l2.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/l2.rst index 7842fc8343..a430d5525d 100644 --- a/docs/report/vpp_performance_tests/packet_latency_graphs/l2.rst +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/l2.rst @@ -25,19 +25,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo *Figure 1a. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. .. raw:: html @@ -55,20 +44,8 @@ git repository: *Figure 1b. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet Switching (feature).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/l2 - $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -88,19 +65,8 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo *Figure 2a. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. .. raw:: html @@ -118,17 +84,5 @@ git repository: *Figure 2b. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet Switching (feature).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/l2 - $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/srv6.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/srv6.rst index bb45c4b9a5..163d892cde 100644 --- a/docs/report/vpp_performance_tests/packet_latency_graphs/srv6.rst +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/srv6.rst @@ -24,20 +24,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy SRv6.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E "78B-1t1c-ethip6.*srv6.*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/srv6 - $ grep -E "78B-1t1c-ethip6.*srv6.*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -56,17 +44,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy SRv6.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E "78B-2t2c-ethip6.*srv6.*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/srv6 - $ grep -E "78B-2t2c-ethip6.*srv6.*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/vm_vhost.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/vm_vhost.rst index 4a9aa6c9fb..5eb8a5750c 100644 --- a/docs/report/vpp_performance_tests/packet_latency_graphs/vm_vhost.rst +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/vm_vhost.rst @@ -26,6 +26,9 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo *Figure 1a. VPP 1thread 1core - packet latency for Phy-to-VM-to-Phy VM vhost-user selected TCs (ipv4).* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. + .. raw:: html @@ -42,20 +45,8 @@ vhost-user selected TCs (ipv4).* *Figure 1b. VPP 1thread 1core - packet latency for Phy-to-VM-to-Phy VM vhost-user selected TCs (l2).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-1t1c-.*vhost.*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/vm_vhost - $ grep -E "64B-1t1c-.*vhost.*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -75,6 +66,9 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo *Figure 2a. VPP 2threads 2cores - packet latency for Phy-to-VM-to-Phy VM vhost-user selected TCs (ipv4).* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. + .. raw:: html @@ -91,17 +85,5 @@ vhost-user selected TCs (ipv4).* *Figure 2b. VPP 2threads 2cores - packet latency for Phy-to-VM-to-Phy VM vhost-user selected TCs (l2).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-2t2c-.*vhost.*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/vm_vhost - $ grep -E "64B-2t2c-.*vhost.*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/container_memif.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/container_memif.rst index e50e735252..3aa67ad917 100644 --- a/docs/report/vpp_performance_tests/packet_throughput_graphs/container_memif.rst +++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/container_memif.rst @@ -29,20 +29,8 @@ in the graph below. *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/container_memif - $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -63,20 +51,8 @@ in the graph below. *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/container_memif - $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. PDR Throughput @@ -101,20 +77,8 @@ in the graph below. PDR measured for 0.5% packet loss ratio. *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/container_memif - $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. PDR measured for 0.5% packet loss ratio. @@ -135,17 +99,5 @@ in the graph below. PDR measured for 0.5% packet loss ratio. *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/container_memif - $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/container_orchestrated.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/container_orchestrated.rst index adf87d0e0e..5fd535d9db 100644 --- a/docs/report/vpp_performance_tests/packet_throughput_graphs/container_orchestrated.rst +++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/container_orchestrated.rst @@ -29,20 +29,8 @@ in the graph below. *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/kubernetes/perf/container_memif - $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -63,20 +51,8 @@ in the graph below. *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/kubernetes/perf/container_memif - $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. PDR Throughput @@ -101,23 +77,8 @@ in the graph below. PDR measured for 0.5% packet loss ratio. *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/kubernetes/perf/container_memif - $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" * - -VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented -in the graph below. PDR measured for 0.5% packet loss ratio. +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. .. raw:: html @@ -135,17 +96,5 @@ in the graph below. PDR measured for 0.5% packet loss ratio. *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/kubernetes/perf/container_memif - $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst index 23d7f6cb13..7d2e707ebf 100644 --- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst +++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst @@ -28,20 +28,8 @@ in the graph below. *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip4 - $ grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -62,20 +50,8 @@ in the graph below. *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip4 - $ grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. PDR Throughput ~~~~~~~~~~~~~~ @@ -99,20 +75,8 @@ in the graph below. PDR measured for 0.5% packet loss ratio. *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip4 - $ grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. PDR measured for 0.5% packet loss ratio. @@ -133,17 +97,5 @@ in the graph below. PDR measured for 0.5% packet loss ratio. *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip4 - $ grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst index 98f3bc6737..7b75f7e378 100644 --- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst +++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst @@ -29,20 +29,8 @@ in the graph below. *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip4_tunnels - $ grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -62,20 +50,8 @@ in the graph below. *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip4_tunnels - $ grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. PDR Throughput ~~~~~~~~~~~~~~ @@ -99,20 +75,8 @@ in the graph below. PDR measured for 0.5% packet loss ratio. *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip4_tunnels - $ grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. PDR measured for 0.5% packet loss ratio. @@ -132,17 +96,5 @@ in the graph below. PDR measured for 0.5% packet loss ratio. *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip4_tunnels - $ grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst index ec9940808f..982752aa20 100644 --- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst +++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst @@ -29,20 +29,8 @@ in the graph below. *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip6 - $ grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP NDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -63,20 +51,8 @@ in the graph below. *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip6 - $ grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. PDR Throughput ~~~~~~~~~~~~~~ @@ -100,23 +76,8 @@ in the graph below. PDR measured for 0.5% packet loss ratio. *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip6 - $ grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" * - -VPP PDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented -in the graph below. PDR measured for 0.5% packet loss ratio. +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. .. raw:: html @@ -134,17 +95,5 @@ in the graph below. PDR measured for 0.5% packet loss ratio. *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip6 - $ grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6_tunnels.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6_tunnels.rst index c329715356..8191ec4a9f 100644 --- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6_tunnels.rst +++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6_tunnels.rst @@ -29,20 +29,8 @@ in the graph below. *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv6 Overlay Tunnels.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip6_tunnels - $ grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP NDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -63,20 +51,8 @@ in the graph below. *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv6 Overlay Tunnels.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip6_tunnels - $ grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. PDR Throughput ~~~~~~~~~~~~~~ @@ -100,20 +76,8 @@ in the graph below. PDR measured for 0.5% packet loss ratio. *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv6 Overlay Tunnels.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip6_tunnels - $ grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP PDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. PDR measured for 0.5% packet loss ratio. @@ -134,17 +98,5 @@ in the graph below. PDR measured for 0.5% packet loss ratio. *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv6 Overlay Tunnels.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-2t2c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip6_tunnels - $ grep -E "78B-2t2c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst index b0fd17d644..723e1f29de 100644 --- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst +++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst @@ -31,20 +31,8 @@ in the graph below. *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPSEC HW.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/crypto - $ grep -E "64B-1t1c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -64,20 +52,8 @@ in the graph below. *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPSEC HW.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/crypto - $ grep -E "64B-2t2c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. PDR Throughput ~~~~~~~~~~~~~~ @@ -100,20 +76,8 @@ in the graph below. PDR measured for 0.5% packet loss ratio. *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPSEC HW.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-pdrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/crypto - $ grep -E "64B-1t1c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-pdrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. PDR measured for 0.5% packet loss ratio. @@ -133,17 +97,5 @@ in the graph below. PDR measured for 0.5% packet loss ratio. *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPSEC HW.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-pdrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/crypto - $ grep -E "64B-2t2c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-pdrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst index 6966413b78..701e3b2988 100644 --- a/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst +++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst @@ -29,19 +29,8 @@ in the graph below. *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. .. raw:: html @@ -60,20 +49,8 @@ git repository: *Figure 2. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet Switching (feature).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/l2 - $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -94,20 +71,8 @@ in the graph below. *Figure 3. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/* - +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. .. raw:: html @@ -125,20 +90,8 @@ git repository: *Figure 4. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet Switching (feature).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/l2 - $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. PDR Throughput @@ -163,20 +116,8 @@ in the graph below. PDR measured for 0.5% packet loss ratio. *Figure 5. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*pdrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/* - +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. .. raw:: html @@ -194,20 +135,8 @@ git repository: *Figure 6. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet Switching (feature).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-pdrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/l2 - $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-pdrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. PDR measured for 0.5% packet loss ratio. @@ -228,20 +157,8 @@ in the graph below. PDR measured for 0.5% packet loss ratio. *Figure 7. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*pdrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/* - +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. .. raw:: html @@ -259,14 +176,5 @@ git repository: *Figure 8. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet Switching (feature).* -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-pdrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/l2 - $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-pdrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/srv6.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/srv6.rst index 5df30d20d9..0df40ac636 100644 --- a/docs/report/vpp_performance_tests/packet_throughput_graphs/srv6.rst +++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/srv6.rst @@ -28,20 +28,8 @@ in the graph below. *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy SRv6.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E "78B-1t1c-ethip6.*srv6.*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/srv6 - $ grep -E "78B-1t1c-ethip6.*srv6.*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP NDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -61,20 +49,8 @@ in the graph below. *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy SRv6.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E "78B-2t2c-ethip6.*srv6.*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/srv6 - $ grep -E "78B-2t2c-ethip6.*srv6.*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. PDR Throughput ~~~~~~~~~~~~~~ @@ -97,20 +73,8 @@ in the graph below. PDR measured for 0.5% packet loss ratio. *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy SRv6.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E "78B-1t1c-ethip6.*srv6.*pdrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/srv6 - $ grep -E "78B-1t1c-ethip6.*srv6.*pdrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP PDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. PDR measured for 0.5% packet loss ratio. @@ -131,17 +95,5 @@ in the graph below. PDR measured for 0.5% packet loss ratio. *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E "78B-2t2c-ethip6.*srv6.*pdrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/srv6 - $ grep -E "78B-2t2c-ethip6.*srv6.*pdrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/vm_vhost.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/vm_vhost.rst index 938e06fa3f..af8eec226b 100644 --- a/docs/report/vpp_performance_tests/packet_throughput_graphs/vm_vhost.rst +++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/vm_vhost.rst @@ -30,6 +30,9 @@ in the graph below. *Figure 1a. VPP 1thread 1core - NDR Throughput for Phy-to-VM-to-Phy VM vhost-user selected TCs.* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. + .. raw:: html @@ -46,20 +49,8 @@ selected TCs.* *Figure 1b. VPP 1thread 1core - NDR Throughput for Phy-to-VM-to-Phy VM vhost-user selected TCs.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-1t1c-(eth|ethip4)-.*vhost.*-ndrdisc" *0-eth*-*-ndrpdrdisc.robot - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/vm_vhost - $ grep -E "64B-1t1c-(eth|ethip4)-.*vhost.*-pdrdisc" *0-eth*-*-ndrpdrdisc.robot +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -80,6 +71,9 @@ in the graph below. *Figure 2a. VPP 2threads 2cores - NDR Throughput for Phy-to-VM-to-Phy VM vhost-user selected TCs.* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. + .. raw:: html @@ -96,20 +90,8 @@ vhost-user selected TCs.* *Figure 2b. VPP 2threads 2cores - NDR Throughput for Phy-to-VM-to-Phy VM vhost-user selected TCs.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-2t2c-(eth|ethip4)-.*vhost.*-ndrdisc" *0-eth*-*-ndrpdrdisc.robot - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/vm_vhost - $ grep -E "64B-2t2c-(eth|ethip4)-.*vhost.*-pdrdisc" *0-eth*-*-ndrpdrdisc.robot +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. PDR Throughput ~~~~~~~~~~~~~~ @@ -133,6 +115,9 @@ in the graph below. PDR measured for 0.5% packet loss ratio. *Figure 3a. VPP 1thread 1core - PDR Throughput for Phy-to-VM-to-Phy VM vhost-user selected TCs.* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. + .. raw:: html @@ -149,20 +134,8 @@ vhost-user selected TCs.* *Figure 3b. VPP 1thread 1core - PDR Throughput for Phy-to-VM-to-Phy VM vhost-user selected TCs.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-1t1c-(eth|ethip4)-.*vhost.*-pdrdisc" *0-eth*-*-ndrpdrdisc.robot - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/vm_vhost - $ grep -E "64B-1t1c-(eth|ethip4)-.*vhost.*-pdrdisc" *0-eth*-*-ndrpdrdisc.robot +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. PDR measured for 0.5% packet loss ratio. @@ -183,6 +156,9 @@ in the graph below. PDR measured for 0.5% packet loss ratio. *Figure 4a. VPP 2thread 2core - PDR Throughput for Phy-to-VM-to-Phy VM vhost-user selected TCs.* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. + .. raw:: html @@ -199,17 +175,5 @@ vhost-user selected TCs.* *Figure 4b. VPP 2thread 2core - PDR Throughput for Phy-to-VM-to-Phy VM vhost-user selected TCs.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-2t2c-(eth|ethip4)-.*vhost.*-pdrdisc" *0-eth*-*-ndrpdrdisc.robot - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/vm_vhost - $ grep -E "64B-2t2c-(eth|ethip4)-.*vhost.*-pdrdisc" *0-eth*-*-ndrpdrdisc.robot +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_memif.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_memif.rst index f2c8323d49..4fb8791dff 100644 --- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_memif.rst +++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_memif.rst @@ -34,20 +34,8 @@ NIC 10ge2p1x520 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized NDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/container_memif - $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. PDR Throughput -------------- @@ -74,17 +62,5 @@ NIC 10ge2p1x520 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized PDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/container_memif - $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_orchestrated.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_orchestrated.rst index 5bc49a7d97..4e8ff4cd25 100644 --- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_orchestrated.rst +++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_orchestrated.rst @@ -34,20 +34,8 @@ NIC 10ge2p1x520 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" 10ge2p1x520* - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/kubernetes/perf/container_memif - $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" 10ge2p1x520* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. NIC 10ge2p1x710 ~~~~~~~~~~~~~~~ @@ -68,20 +56,8 @@ NIC 10ge2p1x710 *Figure 2. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" 10ge2p1x710* - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/kubernetes/perf/container_memif - $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" 10ge2p1x710* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. PDR Throughput -------------- @@ -108,20 +84,8 @@ NIC 10ge2p1x520 *Figure 3. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" 10ge2p1x520* - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/kubernetes/perf/container_memif - $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" 10ge2p1x520* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. NIC 10ge2p1x710 ~~~~~~~~~~~~~~~ @@ -142,17 +106,5 @@ NIC 10ge2p1x710 *Figure 4. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" 10ge2p1x710* - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/kubernetes/perf/container_memif - $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" 10ge2p1x710* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4.rst index 5f2e7d2824..0b2b7ef791 100644 --- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4.rst +++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4.rst @@ -34,20 +34,8 @@ NIC 10ge2p1x520 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -E '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520* - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip4 - $ grep -E '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. NIC 40ge2p1xl710 ~~~~~~~~~~~~~~~~ @@ -68,20 +56,8 @@ NIC 40ge2p1xl710 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 40ge2p1xl710* - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip4 - $ grep -P '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 40ge2p1xl710* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. PDR Throughput -------------- @@ -109,17 +85,5 @@ NIC 10ge2p1x520 *Figure 3. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized PDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -E '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520* - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip4 - $ grep -E '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4_tunnels.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4_tunnels.rst index 4b4777cd68..001584b856 100644 --- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4_tunnels.rst +++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4_tunnels.rst @@ -34,20 +34,8 @@ NIC 10ge2p1x520 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized NDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-(1t1c|2t2c|4t4c)-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip4_tunnels - $ grep -E "64B-(1t1c|2t2c|4t4c)-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. PDR Throughput -------------- @@ -74,17 +62,5 @@ NIC 10ge2p1x520 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized PDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-(1t1c|2t2c|4t4c)-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip4_tunnels - $ grep -E "64B-(1t1c|2t2c|4t4c)-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6.rst index d17f76da24..e8c70d0c18 100644 --- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6.rst +++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6.rst @@ -35,20 +35,8 @@ NIC 10ge2p1x520 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized NDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520* - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip6 - $ grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. NIC 40ge2p1xl710 ~~~~~~~~~~~~~~~~ @@ -69,20 +57,8 @@ NIC 40ge2p1xl710 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized NDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-ndrdisc' 40ge2p1xl710* - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip6 - $ grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-ndrdisc' 40ge2p1xl710* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. PDR Throughput -------------- @@ -110,17 +86,5 @@ NIC 10ge2p1x520 *Figure 3. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized PDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-pdrdisc' 10ge2p1x520* - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip6 - $ grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-pdrdisc' 10ge2p1x520* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6_tunnels.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6_tunnels.rst index 8438aa748d..3965242e8c 100644 --- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6_tunnels.rst +++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6_tunnels.rst @@ -34,20 +34,8 @@ NIC 10ge2p1x520 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized NDR Throughput for Phy-to-Phy IPv6 Overlay Tunnels.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-(1t1c|2t2c|4t4c)-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip6_tunnels - $ grep -E "78B-(1t1c|2t2c|4t4c)-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. PDR Throughput -------------- @@ -74,17 +62,5 @@ NIC 10ge2p1x520 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized PDR Throughput for Phy-to-Phy IPv6 Overlay Tunnels.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-(1t1c|2t2c|4t4c)-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip6_tunnels - $ grep -E "78B-(1t1c|2t2c|4t4c)-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst index 46d426530e..a5a4d7d1bc 100644 --- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst +++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst @@ -36,20 +36,8 @@ NIC 40ge2p1xl710 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized NDR Throughput for Phy-to-Phy IPSEC HW.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-(1t1c|2t2c|4t4c)-ethip4ipsec(base|tpt).*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/crypto - $ grep -E "64B-(1t1c|2t2c|4t4c)-ethip4ipsec(base|tpt).*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. PDR Throughput -------------- @@ -79,17 +67,5 @@ in the graph below. PDR measured for 0.5% packet loss ratio. *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized PDR Throughput for Phy-to-Phy IPSEC HW.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-(1t1c|2t2c|4t4c)-ethip4ipsec(base|tpt).*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/crypto - $ grep -E "64B-(1t1c|2t2c|4t4c)-ethip4ipsec(base|tpt).*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/l2.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/l2.rst index 3c0a37edf0..5db8eba307 100644 --- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/l2.rst +++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/l2.rst @@ -34,19 +34,8 @@ NIC 10ge2p1x520 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized NDR Throughput for Phy-to-Phy L2 Ethernet Switching.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(eth.*)*ndrdisc" 10ge2p1x520* - :shell: - -.. only:: latex - - .. code-block:: bash - - $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(eth.*)*ndrdisc" tests/vpp/perf/l2/10ge2p1x520* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. NIC 40ge2p1xl710 ~~~~~~~~~~~~~~~~ @@ -67,19 +56,8 @@ NIC 40ge2p1xl710 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized NDR Throughput for Phy-to-Phy L2 Ethernet Switching.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" 40ge2p1xl710* - :shell: - -.. only:: latex - - .. code-block:: bash - - $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/40ge2p1xl710* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. PDR Throughput -------------- @@ -107,16 +85,5 @@ NIC 10ge2p1x520 *Figure 3. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized PDR Throughput for Phy-to-Phy L2 Ethernet Switching.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(eth.*)*pdrdisc" 10ge2p1x520* - :shell: - -.. only:: latex - - .. code-block:: bash - - $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(eth.*)*pdrdisc" tests/vpp/perf/l2/10ge2p1x520* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/srv6.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/srv6.rst index 9f96654891..4ece4d538e 100644 --- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/srv6.rst +++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/srv6.rst @@ -35,20 +35,8 @@ NIC 10ge2p1x520 *Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized NDR Throughput for Phy-to-Phy SRv6.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E '78B-(1t1c|2t2c|4t4c)-ethip6.*srv6.*ndrdisc' 10ge2p1x520* - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/srv6 - $ grep -E '78B-(1t1c|2t2c|4t4c)-ethip6.*srv6.*ndrdisc' 10ge2p1x520* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. PDR Throughput -------------- @@ -76,17 +64,5 @@ NIC 10ge2p1x520 *Figure 3. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized PDR Throughput for Phy-to-Phy SRv6.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E '78B-(1t1c|2t2c|4t4c)-ethip6.*srv6.*pdrdisc' 10ge2p1x520* - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/srv6 - $ grep -E '78B-(1t1c|2t2c|4t4c)-ethip6.*srv6.*pdrdisc' 10ge2p1x520* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/vm_vhost.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/vm_vhost.rst index fe4d4deb6b..9bd49b42ab 100644 --- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/vm_vhost.rst +++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/vm_vhost.rst @@ -33,6 +33,9 @@ NIC 10ge2p1x520 *Figure 1a. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. + .. raw:: html @@ -49,20 +52,8 @@ NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* *Figure 1b. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|ethip4)-.*vhost.*-ndrdisc" 10ge2p1x520*-ndrpdrdisc.robot - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/vm_vhost - $ grep -E "grep -E "64B-(1t1c|2t2c|4t4c)-(eth|ethip4)-.*vhost.*-ndrdisc" 10ge2p1x520*-ndrpdrdisc.robot +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. NIC 10ge2p1x710 ~~~~~~~~~~~~~~~ @@ -83,20 +74,8 @@ NIC 10ge2p1x710 *Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-ndrdisc" 10ge2p1x710* - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/vm_vhost - $ grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-ndrdisc" 10ge2p1x710* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. NIC 40ge2p1xl710 ~~~~~~~~~~~~~~~~ @@ -117,6 +96,9 @@ NIC 40ge2p1xl710 *Figure 3a. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. + .. raw:: html @@ -133,20 +115,8 @@ NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* *Figure 3b. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-ndrdisc" 40ge2p1xl710* - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/vm_vhost - $ grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-ndrdisc" 40ge2p1xl710* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. PDR Throughput -------------- @@ -173,6 +143,9 @@ NIC 10ge2p1x520 *Figure 4a. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. + .. raw:: html @@ -189,20 +162,8 @@ PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* *Figure 4b. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|ethip4)-.*vhost.*-pdrdisc" 10ge2p1x520*-ndrpdrdisc.robot - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/vm_vhost - $ grep -E "grep -E "64B-(1t1c|2t2c|4t4c)-(eth|ethip4)-.*vhost.*-pdrdisc" 10ge2p1x520*-ndrpdrdisc.robot +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. NIC 10ge2p1x710 ~~~~~~~~~~~~~~~ @@ -223,20 +184,8 @@ NIC 10ge2p1x710 *Figure 5. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-pdrdisc" 10ge2p1x710* - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/vm_vhost - $ grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-pdrdisc" 10ge2p1x710* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. NIC 40ge2p1xl710 ~~~~~~~~~~~~~~~~ @@ -257,6 +206,9 @@ NIC 40ge2p1xl710 *Figure 6a. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. + .. raw:: html @@ -273,17 +225,5 @@ PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* *Figure 6b. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-pdrdisc" 40ge2p1xl710* - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/vm_vhost - $ grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-pdrdisc" 40ge2p1xl710* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_.