From: Maciek Konstantynowicz Date: Sat, 28 Apr 2018 13:02:10 +0000 (+0100) Subject: rls1804 report: updates to perf rls notes, methodology. X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=commitdiff_plain;h=7c3ca2753db85af1b71f4c35bcef4f826f60b5f0 rls1804 report: updates to perf rls notes, methodology. Change-Id: I54ef2e63ce03aee509fba7dcbfd1d7faabe6ef91 Signed-off-by: Maciek Konstantynowicz --- diff --git a/docs/report/vpp_performance_tests/csit_release_notes.rst b/docs/report/vpp_performance_tests/csit_release_notes.rst index 8fd8a3b634..74517c3064 100644 --- a/docs/report/vpp_performance_tests/csit_release_notes.rst +++ b/docs/report/vpp_performance_tests/csit_release_notes.rst @@ -4,43 +4,38 @@ CSIT Release Notes Changes in CSIT |release| ------------------------- -#. Added VPP performance tests +#. **Added VPP performance tests** - - **Container Service Chain Topologies Orchestrated by K8s with VPP Memif** + - **MRR tests** : New MRR tests measure the packet forwarding rate + under the maximum load offered by traffic generator over a set + trial duration, regardless of packet loss. Maximum load for + specified Ethernet frame size is set to the bi-directional link + rate. MRR tests are used for continuous performance trending and + for comparison between releases. - - Added tests with VPP vswitch in container connecting a number of VPP- - in-container service chain topologies with L2 Cross-Connect and L2 - Bridge-Domain configurations, orchestrated by Kubernetes. Added - following forwarding topologies: i) "Parallel" with packets flowing from - NIC via VPP to container and back to VPP and NIC; ii) "Chained" (a.k.a. - "Snake") with packets flowing via VPP to container, back to VPP, to next - container, back to VPP and so on until the last container in a chain, - then back to VPP and NIC; iii) "Horizontal" with packets flowing via VPP - to container, then via "horizontal" memif to next container, and so on - until the last container, then back to VPP and NIC; + - **SRv6** : Initial SRv6 (Segment Routing IPv6) tests verifying + performance of IPv6 and SRH (Segment Routing Header) + encapsulation, decapsulation, lookups and rewrites based on + configured End and End.DX6 SRv6 egress functions. - - **MRR tests** +#. **Presentation and Analytics Layer (PAL)** - - ; + - Added continuous performance measuring, trending and anomaly + detection. Includes new PAL code and Jenkins jobs for Performance + Trending (PT) and Performance Analysis (PA) producing performance + trending dashboard and trendline graphs with summary and drill- + down views across all specified tests that can be reviewed and + inspected regularly by FD.io developers and users community. - - **SRv6** +#. **Test Framework Optimizations** - - Initial SRv6 (Segment Routing IPv6) tests verifying performance of - IPv6 and SRH (Segment Routing Header) encapsulation, decapsulation, - lookups and rewrites based on configured End and End.DX6 SRv6 egress - functions; + - **Performance tests efficiency** : Qemu build/install + optimizations, warmup phase handling, vpp restart handling. + Resulted in improved stability and reduced total execution time by + 30% for single pkt size e.g. 64B/78B. -#. Presentation and Analytics Layer - - - Added throughput speedup analysis for multi-core and multi-thread - VPP tests into Presentation and Analytics Layer (PAL) for automated - CSIT test results analysis; - -#. Other changes - - - **Framework optimizations** - - - Performance test duration improvements and stability; + - **General code housekeeping** : ongoing RF keywords + optimizations, removal of redundant RF keywords. Performance Changes ------------------- @@ -98,6 +93,8 @@ pretty ASCII formats: Known Issues ------------ + + Here is the list of known issues in CSIT |release| for VPP performance tests: +---+-------------------------------------------------+------------+-----------------------------------------------------------------+ diff --git a/docs/report/vpp_performance_tests/index.rst b/docs/report/vpp_performance_tests/index.rst index 1292051a26..45efc3e10b 100644 --- a/docs/report/vpp_performance_tests/index.rst +++ b/docs/report/vpp_performance_tests/index.rst @@ -5,6 +5,7 @@ VPP Performance Tests overview csit_release_notes + methodology packet_throughput_graphs/index throughput_speedup_multi_core/index packet_latency_graphs/index diff --git a/docs/report/vpp_performance_tests/methodology.rst b/docs/report/vpp_performance_tests/methodology.rst new file mode 100644 index 0000000000..1de3fa4217 --- /dev/null +++ b/docs/report/vpp_performance_tests/methodology.rst @@ -0,0 +1,293 @@ +Test Methodology +================ + +Multi-Core and Multi-Threading +------------------------------ + +**Intel Hyper-Threading** - CSIT |release| performance tests are executed with +SUT servers' Intel XEON processors configured in Intel Hyper-Threading Disabled +mode (BIOS setting). This is the simplest configuration used to establish +baseline single-thread single-core application packet processing and forwarding +performance. Subsequent releases of CSIT will add performance tests with Intel +Hyper-Threading Enabled (requires BIOS settings change and hard reboot of +server). + +**Multi-core Tests** - CSIT |release| multi-core tests are executed in the +following VPP thread and core configurations: + +#. 1t1c - 1 VPP worker thread on 1 CPU physical core. +#. 2t2c - 2 VPP worker threads on 2 CPU physical cores. +#. 4t4c - 4 VPP worker threads on 4 CPU physical cores. + +VPP worker threads are the data plane threads. VPP control thread is +running on a separate non-isolated core together with other Linux +processes. Note that in quite a few test cases running VPP workers on 2 +or 4 physical cores hits the I/O bandwidth or packets-per-second limit +of tested NIC. + +Section :ref:`throughput_speedup_multi_core` includes a set of graphs +illustrating packet throughout speedup when running VPP on multiple +cores. + +Packet Throughput +----------------- + +Following values are measured and reported for packet throughput tests: + +- NDR binary search per :rfc:`2544`: + + - Packet rate: "RATE: pps + (2x )"; + - Aggregate bandwidth: "BANDWIDTH: Gbps (untagged)"; + +- PDR binary search per :rfc:`2544`: + + - Packet rate: "RATE: pps (2x + )"; + - Aggregate bandwidth: "BANDWIDTH: Gbps (untagged)"; + - Packet loss tolerance: "LOSS_ACCEPTANCE "; + +- NDR and PDR are measured for the following L2 frame sizes (untagged + Ethernet): + + - IPv4 payload: 64B, IMIX_v4_1 (28x64B,16x570B,4x1518B), 1518B, 9000B; + - IPv6 payload: 78B, 1518B, 9000B; + +- NDR and PDR binary search resolution is determined by the final value of the + rate change, referred to as the final step: + + - The final step is set to 50kpps for all NIC to NIC tests and all L2 + frame sizes except 9000B (changed from 100kpps used in previous + releases). + + - The final step is set to 10kpps for all remaining tests, including 9000B + and all vhost VM and memif Container tests. + +All rates are reported from external Traffic Generator perspective. + +Maximum Receive Rate (MRR) +-------------------------- + +MRR tests measure the packet forwarding rate under the maximum +load offered by traffic generator over a set trial duration, +regardless of packet loss. Maximum load for specified Ethernet frame +size is set to the bi-directional link rate. + +Current parameters for MRR tests: + +- Ethernet frame sizes: 64B (78B for IPv6 tests) for all tests, IMIX for + selected tests (vhost, memif); all quoted sizes include frame CRC, but + exclude per frame transmission overhead of 20B (preamble, inter frame + gap). + +- Maximum load offered: 10GE and 40GE link (sub-)rates depending on NIC + tested, with the actual packet rate depending on frame size, + transmission overhead and traffic generator NIC forwarding capacity. + + - For 10GE NICs the maximum packet rate load is 2* 14.88 Mpps for 64B, + a 10GE bi-directional link rate. + - For 40GE NICs the maximum packet rate load is 2* 18.75 Mpps for 64B, + a 40GE bi-directional link sub-rate limited by TG 40GE NIC used, + XL710. + +- Trial duration: 10sec. + +Similarly to NDR/PDR throughput tests, MRR test should be reporting bi- +directional link rate (or NIC rate, if lower) if tested VPP +configuration can handle the packet rate higher than bi-directional link +rate, e.g. large packet tests and/or multi-core tests. + +MRR tests are used for continuous performance trending and for +comparison between releases. + +Packet Latency +-------------- + +TRex Traffic Generator (TG) is used for measuring latency of VPP DUTs. Reported +latency values are measured using following methodology: + +- Latency tests are performed at 10%, 50% of discovered NDR rate (non drop rate) + for each NDR throughput test and packet size (except IMIX). +- TG sends dedicated latency streams, one per direction, each at the rate of + 10kpps at the prescribed packet size; these are sent in addition to the main + load streams. +- TG reports min/avg/max latency values per stream direction, hence two sets + of latency values are reported per test case; future release of TRex is + expected to report latency percentiles. +- Reported latency values are aggregate across two SUTs due to three node + topology used for all performance tests; for per SUT latency, reported value + should be divided by two. +- 1usec is the measurement accuracy advertised by TRex TG for the setup used in + FD.io labs used by CSIT project. +- TRex setup introduces an always-on error of about 2*2usec per latency flow - + additonal Tx/Rx interface latency induced by TRex SW writing and reading + packet timestamps on CPU cores without HW acceleration on NICs closer to the + interface line. + +vhostuser with KVM VMs +---------------------- + +FD.io CSIT performance lab is testing VPP vhost with KVM VMs using following +environment settings: + +- Tests with varying Qemu virtio queue (a.k.a. vring) sizes: [vr256] default 256 + descriptors, [vr1024] 1024 descriptors to optimize for packet throughput. + +- Tests with varying Linux :abbr:`CFS (Completely Fair Scheduler)` settings: + [cfs] default settings, [cfsrr1] CFS RoundRobin(1) policy applied to all data + plane threads handling test packet path including all VPP worker threads and + all Qemu testpmd poll-mode threads. + +- Resulting test cases are all combinations with [vr256,vr1024] and + [cfs,cfsrr1] settings. + +- Adjusted Linux kernel :abbr:`CFS (Completely Fair Scheduler)` scheduler policy + for data plane threads used in CSIT is documented in + `CSIT Performance Environment Tuning wiki `_. + The purpose is to verify performance impact (MRR and NDR/PDR + throughput) and same test measurements repeatability, by making VPP + and VM data plane threads less susceptible to other Linux OS system + tasks hijacking CPU cores running those data plane threads. + +Memif with LXC and Docker Containers +------------------------------------ + +CSIT |release| includes tests taking advantage of VPP memif virtual +interface (shared memory interface) to interconnect VPP running in +Containers. VPP vswitch instance runs in bare-metal user-mode handling +NIC interfaces and connecting over memif (Slave side) to VPPs running in +:abbr:`Linux Container (LXC)` or in Docker Container (DRC) configured +with memif (Master side). LXCs and DRCs run in a priviliged mode with +VPP data plane worker threads pinned to dedicated physical CPU cores per +usual CSIT practice. All VPP instances run the same version of software. +This test topology is equivalent to existing tests with vhost-user and +VMs as described earlier in :ref:`tested_physical_topologies`. + +More information about CSIT LXC and DRC setup and control is available +in :ref:`container_orchestration_in_csit`. + +Memif with K8s Pods/Containers +------------------------------ + +CSIT |release| includes tests of VPP topologies running in K8s +orchestrated Pods/Containers and connected over memif virtual +interfaces. In order to provide simple topology coding flexibility and +extensibility container orchestration is done with `Kubernetes +`_ using `Docker +`_ images for all container applications +including VPP. `Ligato `_ is used for the +Pod/Container networking orchestration that is integrated with K8s, +including memif support. + +In these tests VPP vswitch runs in a K8s Pod with Docker Container (DRC) +handling NIC interfaces and connecting over memif to more instances of +VPP running in Pods/DRCs. All DRCs run in a priviliged mode with VPP +data plane worker threads pinned to dedicated physical CPU cores per +usual CSIT practice. All VPP instances run the same version of software. +This test topology is equivalent to existing tests with vhost-user and +VMs as described earlier in :ref:`tested_physical_topologies`. + +Further documentation is available in +:ref:`container_orchestration_in_csit`. + +IPSec with Intel QAT HW cards +----------------------------- + +VPP IPSec performance tests are using DPDK cryptodev device driver in +combination with HW cryptodev devices - Intel QAT 8950 50G - present in +LF FD.io physical testbeds. DPDK cryptodev can be used for all IPSec +data plane functions supported by VPP. + +Currently CSIT |release| implements following IPSec test cases: + +- AES-GCM, CBC-SHA1 ciphers, in combination with IPv4 routed-forwarding + with Intel xl710 NIC. +- CBC-SHA1 ciphers, in combination with LISP-GPE overlay tunneling for + IPv4-over-IPv4 with Intel xl710 NIC. + +TRex Traffic Generator Usage +---------------------------- + +`TRex traffic generator `_ is used for all +CSIT performance tests. TRex stateless mode is used to measure NDR and PDR +throughputs using binary search (NDR and PDR discovery tests) and for quick +checks of DUT performance against the reference NDRs (NDR check tests) for +specific configuration. + +TRex is installed and run on the TG compute node. The typical procedure is: + +- If the TRex is not already installed on TG, it is installed in the + suite setup phase - see `TRex intallation`_. +- TRex configuration is set in its configuration file + :: + + /etc/trex_cfg.yaml + +- TRex is started in the background mode + :: + + $ sh -c 'cd /scripts/ && sudo nohup ./t-rex-64 -i -c 7 --iom 0 > /tmp/trex.log 2>&1 &' > /dev/null + +- There are traffic streams dynamically prepared for each test, based on traffic + profiles. The traffic is sent and the statistics obtained using + :command:`trex_stl_lib.api.STLClient`. + +**Measuring packet loss** + +- Create an instance of STLClient +- Connect to the client +- Add all streams +- Clear statistics +- Send the traffic for defined time +- Get the statistics + +If there is a warm-up phase required, the traffic is sent also before test and +the statistics are ignored. + +**Measuring latency** + +If measurement of latency is requested, two more packet streams are created (one +for each direction) with TRex flow_stats parameter set to STLFlowLatencyStats. In +that case, returned statistics will also include min/avg/max latency values. + +TCP/IP tests with WRK tool +-------------------------- + +`WRK HTTP benchmarking tool `_ is used for +experimental TCP/IP and HTTP tests of VPP TCP/IP stack and built-in +static HTTP server. WRK has been chosen as it is capable of generating +significant TCP/IP and HTTP loads by scaling number of threads across +multi-core processors. + +This in turn enables quite high scale benchmarking of the main TCP/IP +and HTTP service including HTTP TCP/IP Connections-Per-Second (CPS), +HTTP Requests-Per-Second and HTTP Bandwidth Throughput. + +The initial tests are designed as follows: + +- HTTP and TCP/IP Connections-Per-Second (CPS) + + - WRK configured to use 8 threads across 8 cores, 1 thread per core. + - Maximum of 50 concurrent connections across all WRK threads. + - Timeout for server responses set to 5 seconds. + - Test duration is 30 seconds. + - Expected HTTP test sequence: + + - Single HTTP GET Request sent per open connection. + - Connection close after valid HTTP reply. + - Resulting flow sequence - 8 packets: >S,A,>Req,F, A. + +- HTTP Requests-Per-Second + + - WRK configured to use 8 threads across 8 cores, 1 thread per core. + - Maximum of 50 concurrent connections across all WRK threads. + - Timeout for server responses set to 5 seconds. + - Test duration is 30 seconds. + - Expected HTTP test sequence: + + - Multiple HTTP GET Requests sent in sequence per open connection. + - Connection close after set test duration time. + - Resulting flow sequence: >S,A,>Req[1],Req[n],F,A. diff --git a/docs/report/vpp_performance_tests/overview.rst b/docs/report/vpp_performance_tests/overview.rst index 5f85b77b51..4f8fd19388 100644 --- a/docs/report/vpp_performance_tests/overview.rst +++ b/docs/report/vpp_performance_tests/overview.rst @@ -237,265 +237,3 @@ and system functional tests, introduced in CSIT |release-1|. The naming should be intuitive for majority of the tests. Complete description of CSIT test naming convention is provided on `CSIT test naming wiki `_. - -Methodology: Multi-Core and Multi-Threading -------------------------------------------- - -**Intel Hyper-Threading** - CSIT |release| performance tests are executed with -SUT servers' Intel XEON processors configured in Intel Hyper-Threading Disabled -mode (BIOS setting). This is the simplest configuration used to establish -baseline single-thread single-core application packet processing and forwarding -performance. Subsequent releases of CSIT will add performance tests with Intel -Hyper-Threading Enabled (requires BIOS settings change and hard reboot of -server). - -**Multi-core Tests** - CSIT |release| multi-core tests are executed in the -following VPP thread and core configurations: - -#. 1t1c - 1 VPP worker thread on 1 CPU physical core. -#. 2t2c - 2 VPP worker threads on 2 CPU physical cores. -#. 4t4c - 4 VPP worker threads on 4 CPU physical cores. - -VPP worker threads are the data plane threads. VPP control thread is -running on a separate non-isolated core together with other Linux -processes. Note that in quite a few test cases running VPP workers on 2 -or 4 physical cores hits the I/O bandwidth or packets-per-second limit -of tested NIC. - -Section :ref:`throughput_speedup_multi_core` includes a set of graphs -illustrating packet throughout speedup when running VPP on multiple -cores. - -Methodology: Packet Throughput ------------------------------- - -Following values are measured and reported for packet throughput tests: - -- NDR binary search per :rfc:`2544`: - - - Packet rate: "RATE: pps - (2x )"; - - Aggregate bandwidth: "BANDWIDTH: Gbps (untagged)"; - -- PDR binary search per :rfc:`2544`: - - - Packet rate: "RATE: pps (2x - )"; - - Aggregate bandwidth: "BANDWIDTH: Gbps (untagged)"; - - Packet loss tolerance: "LOSS_ACCEPTANCE "; - -- NDR and PDR are measured for the following L2 frame sizes: - - - IPv4: 64B, IMIX_v4_1 (28x64B,16x570B,4x1518B), 1518B, 9000B; - - IPv6: 78B, 1518B, 9000B; - -- NDR and PDR binary search resolution is determined by the final value of the - rate change, referred to as the final step: - - - The final step is set to 50kpps for all NIC to NIC tests and all L2 - frame sizes except 9000B (changed from 100kpps used in previous - releases). - - - The final step is set to 10kpps for all remaining tests, including 9000B - and all vhost VM and memif Container tests. - -All rates are reported from external Traffic Generator perspective. - -Methodology: Packet Latency ---------------------------- - -TRex Traffic Generator (TG) is used for measuring latency of VPP DUTs. Reported -latency values are measured using following methodology: - -- Latency tests are performed at 10%, 50% of discovered NDR rate (non drop rate) - for each NDR throughput test and packet size (except IMIX). -- TG sends dedicated latency streams, one per direction, each at the rate of - 10kpps at the prescribed packet size; these are sent in addition to the main - load streams. -- TG reports min/avg/max latency values per stream direction, hence two sets - of latency values are reported per test case; future release of TRex is - expected to report latency percentiles. -- Reported latency values are aggregate across two SUTs due to three node - topology used for all performance tests; for per SUT latency, reported value - should be divided by two. -- 1usec is the measurement accuracy advertised by TRex TG for the setup used in - FD.io labs used by CSIT project. -- TRex setup introduces an always-on error of about 2*2usec per latency flow - - additonal Tx/Rx interface latency induced by TRex SW writing and reading - packet timestamps on CPU cores without HW acceleration on NICs closer to the - interface line. - - -Methodology: KVM VM vhost -------------------------- - -CSIT |release| introduced test environment configuration changes to KVM Qemu -vhost-user tests in order to more representatively measure |vpp-release| -performance in configurations with vhost-user interfaces and different Qemu -settings. - -FD.io CSIT performance lab is testing VPP vhost with KVM VMs using following -environment settings: - -- Tests with varying Qemu virtio queue (a.k.a. vring) sizes: [vr256] default 256 - descriptors, [vr1024] 1024 descriptors to optimize for packet throughput; - -- Tests with varying Linux :abbr:`CFS (Completely Fair Scheduler)` settings: - [cfs] default settings, [cfsrr1] CFS RoundRobin(1) policy applied to all data - plane threads handling test packet path including all VPP worker threads and - all Qemu testpmd poll-mode threads; - -- Resulting test cases are all combinations with [vr256,vr1024] and - [cfs,cfsrr1] settings; - -- Adjusted Linux kernel :abbr:`CFS (Completely Fair Scheduler)` scheduler policy - for data plane threads used in CSIT is documented in - `CSIT Performance Environment Tuning wiki `_. - The purpose is to verify performance impact (NDR, PDR throughput) and - same test measurements repeatability, by making VPP and VM data plane - threads less susceptible to other Linux OS system tasks hijacking CPU - cores running those data plane threads. - -Methodology: LXC and Docker Containers memif --------------------------------------------- - -CSIT |release| introduced additional tests taking advantage of VPP memif virtual -interface (shared memory interface) tests to interconnect VPP instances. VPP -vswitch instance runs in bare-metal user-mode handling Intel x520 NIC 10GbE, -Intel x710 NIC 10GbE, Intel xl710 NIC 40GbE interfaces and connecting over memif -(Slave side) virtual interfaces to more instances of VPP running in -:abbr:`LXC (Linux Container)` or in Docker Containers, both with memif virtual -interfaces (Master side). LXCs and Docker Containers run in a priviliged mode -with VPP data plane worker threads pinned to dedicated physical CPU cores per -usual CSIT practice. All VPP instances run the same version of software. -This test topology is equivalent to existing tests with vhost-user and -VMs as described earlier in :ref:`tested_physical_topologies`. - -More information about CSIT LXC and Docker Container setup and control -is available in :ref:`container_orchestration_in_csit`. - -Methodology: Container Topologies Orchestrated by K8s ------------------------------------------------------ - -CSIT |release| introduced new tests of Container topologies connected -over the memif virtual interface (shared memory interface). In order to -provide simple topology coding flexibility and extensibility container -orchestration is done with `Kubernetes `_ -using `Docker `_ images for all container -applications including VPP. `Ligato `_ is -used to address the container networking orchestration that is -integrated with K8s, including memif support. - -For these tests VPP vswitch instance runs in a Docker Container handling -Intel x520 NIC 10GbE, Intel x710 NIC 10GbE interfaces and connecting over memif -virtual interfaces to more instances of VPP running in Docker Containers -with memif virtual interfaces. All Docker Containers run in a priviliged mode -with VPP data plane worker threads pinned to dedicated physical CPU cores per -usual CSIT practice. All VPP instances run the same version of software. This -test topology is equivalent to existing tests with vhost-user and VMs as -described earlier in :ref:`tested_physical_topologies`. - -More information about CSIT Container Topologies Orchestrated by K8s is -available in :ref:`container_orchestration_in_csit`. - -Methodology: IPSec with Intel QAT HW cards ------------------------------------------- - -VPP IPSec performance tests are using DPDK cryptodev device driver in -combination with HW cryptodev devices - Intel QAT 8950 50G - present in -LF FD.io physical testbeds. DPDK cryptodev can be used for all IPSec -data plane functions supported by VPP. - -Currently CSIT |release| implements following IPSec test cases: - -- AES-GCM, CBC-SHA1 ciphers, in combination with IPv4 routed-forwarding - with Intel xl710 NIC. -- CBC-SHA1 ciphers, in combination with LISP-GPE overlay tunneling for - IPv4-over-IPv4 with Intel xl710 NIC. - -Methodology: TRex Traffic Generator Usage ------------------------------------------ - -`TRex traffic generator `_ is used for all -CSIT performance tests. TRex stateless mode is used to measure NDR and PDR -throughputs using binary search (NDR and PDR discovery tests) and for quick -checks of DUT performance against the reference NDRs (NDR check tests) for -specific configuration. - -TRex is installed and run on the TG compute node. The typical procedure is: - -- If the TRex is not already installed on TG, it is installed in the - suite setup phase - see `TRex intallation`_. -- TRex configuration is set in its configuration file - :: - - /etc/trex_cfg.yaml - -- TRex is started in the background mode - :: - - $ sh -c 'cd /scripts/ && sudo nohup ./t-rex-64 -i -c 7 --iom 0 > /tmp/trex.log 2>&1 &' > /dev/null - -- There are traffic streams dynamically prepared for each test, based on traffic - profiles. The traffic is sent and the statistics obtained using - :command:`trex_stl_lib.api.STLClient`. - -**Measuring packet loss** - -- Create an instance of STLClient -- Connect to the client -- Add all streams -- Clear statistics -- Send the traffic for defined time -- Get the statistics - -If there is a warm-up phase required, the traffic is sent also before test and -the statistics are ignored. - -**Measuring latency** - -If measurement of latency is requested, two more packet streams are created (one -for each direction) with TRex flow_stats parameter set to STLFlowLatencyStats. In -that case, returned statistics will also include min/avg/max latency values. - -Methodology: TCP/IP tests with WRK tool ---------------------------------------- - -`WRK HTTP benchmarking tool `_ is used for -experimental TCP/IP and HTTP tests of VPP TCP/IP stack and built-in -static HTTP server. WRK has been chosen as it is capable of generating -significant TCP/IP and HTTP loads by scaling number of threads across -multi-core processors. - -This in turn enables quite high scale benchmarking of the main TCP/IP -and HTTP service including HTTP TCP/IP Connections-Per-Second (CPS), -HTTP Requests-Per-Second and HTTP Bandwidth Throughput. - -The initial tests are designed as follows: - -- HTTP and TCP/IP Connections-Per-Second (CPS) - - - WRK configured to use 8 threads across 8 cores, 1 thread per core. - - Maximum of 50 concurrent connections across all WRK threads. - - Timeout for server responses set to 5 seconds. - - Test duration is 30 seconds. - - Expected HTTP test sequence: - - - Single HTTP GET Request sent per open connection. - - Connection close after valid HTTP reply. - - Resulting flow sequence - 8 packets: >S,A,>Req,F, A. - -- HTTP Requests-Per-Second - - - WRK configured to use 8 threads across 8 cores, 1 thread per core. - - Maximum of 50 concurrent connections across all WRK threads. - - Timeout for server responses set to 5 seconds. - - Test duration is 30 seconds. - - Expected HTTP test sequence: - - - Multiple HTTP GET Requests sent in sequence per open connection. - - Connection close after set test duration time. - - Resulting flow sequence: >S,A,>Req[1],Req[n],F,A.