From: Tibor Frank Date: Tue, 5 Jun 2018 07:48:24 +0000 (+0200) Subject: CSIT-1115: Add dpdk mrr tests X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=commitdiff_plain;h=84aade31caf9df41a880affad7aef4549dfc6b5e CSIT-1115: Add dpdk mrr tests Change-Id: Ib9d060f7e0d476b79debc750409da5277478e5b4 Signed-off-by: Tibor Frank --- diff --git a/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-mrr.robot b/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-mrr.robot new file mode 100644 index 0000000000..69d617e764 --- /dev/null +++ b/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-mrr.robot @@ -0,0 +1,218 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/dpdk/default.robot +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.DPDK.DPDKTools +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | PERFTEST | MRR | 1NUMA +| ... | NIC_Intel-X520-DA2 | DPDK | ETH | L2XCFWD | BASE +| ... +| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| Suite Teardown | Tear down DPDK 3-node performance topology +| ... +| Documentation | *Raw results L2 routing test cases* +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 frame forwarding. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK testpmd\ +| ... | application and use the io forwarding mode. DUT1 and DUT2 tested with\ +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | interfaces. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 + +*** Keywords *** +| Check RR for eth-l2xcbase-testpmd +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with ${wt} thread(s), ${wt}\ +| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | trial throughput test. +| | ... +| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... +| | # Test Variables required for test teardown +| | Set Test Variable | ${framesize} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${jumbo_frames}= | Set Variable If +| | ... | ${get_framesize} < ${1522} | no | yes +| | ... +| | Given Start L2FWD '${wt}' worker threads and '${rxq}' rxqueues with jumbo frames '${jumbo_frames}' +| | Then Traffic should pass with maximum rate | ${perf_trial_duration} +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1t1c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 64B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${64} | wt=1 | rxq=1 + +| tc02-1518B-1t1c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 1518B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${1518} | wt=1 | rxq=1 + +| tc03-9000B-1t1c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 9000B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${9000} | wt=1 | rxq=1 + +| tc04-IMIX-1t1c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ +| | ... | trial throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=IMIX_v4_1 | wt=1 | rxq=1 + +| tc05-64B-2t2c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 64B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${64} | wt=2 | rxq=1 + +| tc06-1518B-2t2c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 1518B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${1518} | wt=2 | rxq=1 + +| tc07-9000B-2t2c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 9000B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${9000} | wt=2 | rxq=1 + +| tc08-IMIX-2t2c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ +| | ... | trial throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=IMIX_v4_1 | wt=2 | rxq=1 + +| tc09-64B-4t4c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | 4 phy cores, 2 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 64B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${64} | wt=4 | rxq=2 + +| tc10-1518B-4t4c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | 4 phy cores, 2 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 1518B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${1518} | wt=4 | rxq=2 + +| tc11-9000B-4t4c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | 4 phy cores, 2 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 9000B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${9000} | wt=4 | rxq=2 + +| tc12-IMIX-4t4c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | 4 phy cores, 2 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ +| | ... | trial throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=IMIX_v4_1 | wt=4 | rxq=2 diff --git a/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot b/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot new file mode 100644 index 0000000000..afc39c4820 --- /dev/null +++ b/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot @@ -0,0 +1,217 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/dpdk/default.robot +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.DPDK.DPDKTools +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR | 1NUMA +| ... | NIC_Intel-X520-DA2 | DPDK | IP4FWD | BASE | ETH +| ... +| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model +| ... | L3 | Intel-X520-DA2 +| Suite Teardown | Tear down DPDK 3-node performance topology +| ... +| Documentation | *Raw results IPv4 routing test cases* +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L3 IPv4 routing. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK l3fwd application\ +| ... | DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | interfaces. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst253_l3fwd + +*** Keywords *** +| Check RR for ethip4-ip4base-l3fwd +| | [Documentation] +| | ... | [Cfg] DUT runs L3 IPv4 routing config with ${wt} thread(s), ${wt}\ +| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | trial throughput test. +| | ... +| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... +| | # Test Variables required for test teardown +| | Set Test Variable | ${framesize} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${jumbo_frames}= | Set Variable If +| | ... | ${get_framesize} < ${1522} | no | yes +| | ... +| | Given Start L3FWD '${wt}' worker threads and '${rxq}' rxqueues with jumbo frames '${jumbo_frames}' +| | Then Traffic should pass with maximum rate | ${perf_trial_duration} +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1t1c-ethip4-ip4base-l3fwd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 64B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for ethip4-ip4base-l3fwd +| | framesize=${64} | wt=1 | rxq=1 + +| tc02-1518B-1t1c-ethip4-ip4base-l3fwd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 1518B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for ethip4-ip4base-l3fwd +| | framesize=${1518} | wt=1 | rxq=1 + +| tc03-9000B-1t1c-ethip4-ip4base-l3fwd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 9000B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for ethip4-ip4base-l3fwd +| | framesize=${9000} | wt=1 | rxq=1 + +| tc04-IMIX-1t1c-ethip4-ip4base-l3fwd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ +| | ... | trial throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for ethip4-ip4base-l3fwd +| | framesize=IMIX_v4_1 | wt=1 | rxq=1 + +| tc05-64B-2t2c-ethip4-ip4base-l3fwd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads,\ +| | ... | 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 64B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for ethip4-ip4base-l3fwd +| | framesize=${64} | wt=2 | rxq=1 + +| tc06-1518B-2t2c-ethip4-ip4base-l3fwd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads,\ +| | ... | 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 1518B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for ethip4-ip4base-l3fwd +| | framesize=${1518} | wt=2 | rxq=1 + +| tc07-9000B-2t2c-ethip4-ip4base-l3fwd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads,\ +| | ... | 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 9000B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for ethip4-ip4base-l3fwd +| | framesize=${9000} | wt=2 | rxq=1 + +| tc08-IMIX-2t2c-ethip4-ip4base-l3fwd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads,\ +| | ... | 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ +| | ... | trial throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for ethip4-ip4base-l3fwd +| | framesize=IMIX_v4_1 | wt=2 | rxq=1 + +| tc09-64B-4t4c-ethip4-ip4base-l3fwd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads,\ +| | ... | 4 phy cores, 2 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 64B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for ethip4-ip4base-l3fwd +| | framesize=${64} | wt=4 | rxq=2 + +| tc10-1518B-4t4c-ethip4-ip4base-l3fwd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads,\ +| | ... | 4 phy cores, 2 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 1518B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for ethip4-ip4base-l3fwd +| | framesize=${1518} | wt=4 | rxq=2 + +| tc11-9000B-4t4c-ethip4-ip4base-l3fwd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads,\ +| | ... | 4 phy cores, 2 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 9000B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for ethip4-ip4base-l3fwd +| | framesize=${9000} | wt=4 | rxq=2 + +| tc12-IMIX-4t4c-ethip4-ip4base-l3fwd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads,\ +| | ... | 4 phy cores, 2 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ +| | ... | trial throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for ethip4-ip4base-l3fwd +| | framesize=IMIX_v4_1 | wt=4 | rxq=2 diff --git a/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-mrr.robot b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-mrr.robot new file mode 100644 index 0000000000..14e3fe378e --- /dev/null +++ b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-mrr.robot @@ -0,0 +1,218 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/dpdk/default.robot +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.DPDK.DPDKTools +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | PERFTEST | MRR | 1NUMA +| ... | NIC_Intel-X710 | DPDK | ETH | L2XCFWD | BASE +| ... +| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X710 +| Suite Teardown | Tear down DPDK 3-node performance topology +| ... +| Documentation | *Raw results L2 routing test cases* +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 frame forwarding. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK testpmd\ +| ... | application and use the io forwarding mode. DUT1 and DUT2 tested with\ +| ... | 2p10GE NIC X710 by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | interfaces. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit}= | ${10000000000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 + +*** Keywords *** +| Check RR for eth-l2xcbase-testpmd +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with ${wt} thread(s), ${wt}\ +| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | trial throughput test. +| | ... +| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... +| | # Test Variables required for test teardown +| | Set Test Variable | ${framesize} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${jumbo_frames}= | Set Variable If +| | ... | ${get_framesize} < ${1522} | no | yes +| | ... +| | Given Start L2FWD '${wt}' worker threads and '${rxq}' rxqueues with jumbo frames '${jumbo_frames}' +| | Then Traffic should pass with maximum rate | ${perf_trial_duration} +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1t1c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 64B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${64} | wt=1 | rxq=1 + +| tc02-1518B-1t1c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 1518B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${1518} | wt=1 | rxq=1 + +| tc03-9000B-1t1c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 9000B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${9000} | wt=1 | rxq=1 + +| tc04-IMIX-1t1c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ +| | ... | trial throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=IMIX_v4_1 | wt=1 | rxq=1 + +| tc05-64B-2t2c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 64B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${64} | wt=2 | rxq=1 + +| tc06-1518B-2t2c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 1518B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${1518} | wt=2 | rxq=1 + +| tc07-9000B-2t2c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 9000B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${9000} | wt=2 | rxq=1 + +| tc08-IMIX-2t2c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ +| | ... | trial throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=IMIX_v4_1 | wt=2 | rxq=1 + +| tc09-64B-4t4c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | 4 phy cores, 2 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 64B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${64} | wt=4 | rxq=2 + +| tc10-1518B-4t4c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | 4 phy cores, 2 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 1518B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${1518} | wt=4 | rxq=2 + +| tc11-9000B-4t4c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | 4 phy cores, 2 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 9000B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${9000} | wt=4 | rxq=2 + +| tc12-IMIX-4t4c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | 4 phy cores, 2 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ +| | ... | trial throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=IMIX_v4_1 | wt=4 | rxq=2 diff --git a/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-mrr.robot b/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-mrr.robot new file mode 100644 index 0000000000..d5ad503715 --- /dev/null +++ b/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-mrr.robot @@ -0,0 +1,222 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/dpdk/default.robot +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.DPDK.DPDKTools +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | PERFTEST | MRR | 1NUMA +| ... | NIC_Intel-XL710 | DPDK | ETH | L2XCFWD | BASE +| ... +| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-XL710 +| Suite Teardown | Tear down DPDK 3-node performance topology +| ... +| Documentation | *Raw results L2 routing test cases* +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 frame forwarding. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK testpmd\ +| ... | application and use the io forwarding mode. DUT1 and DUT2 tested with\ +| ... | 2p40GE NIC XL710 by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | interfaces. + +*** Variables *** +# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +| ${s_24.5G}= | ${24500000000} +# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +| ${s_18.75Mpps}= | ${18750000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 + +*** Keywords *** +| Check RR for eth-l2xcbase-testpmd +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with ${wt} thread(s), ${wt}\ +| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | trial throughput test. +| | ... +| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... +| | # Test Variables required for test teardown +| | Set Test Variable | ${framesize} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${get_framesize} +| | ${max_rate}= | Set Variable If +| | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate} +| | ${jumbo_frames}= | Set Variable If +| | ... | ${get_framesize} < ${1522} | no | yes +| | ... +| | Given Start L2FWD '${wt}' worker threads and '${rxq}' rxqueues with jumbo frames '${jumbo_frames}' +| | Then Traffic should pass with maximum rate | ${perf_trial_duration} +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1t1c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 64B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${64} | wt=1 | rxq=1 + +| tc02-1518B-1t1c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 1518B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${1518} | wt=1 | rxq=1 + +| tc03-9000B-1t1c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 9000B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${9000} | wt=1 | rxq=1 + +| tc04-IMIX-1t1c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ +| | ... | trial throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=IMIX_v4_1 | wt=1 | rxq=1 + +| tc05-64B-2t2c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 64B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${64} | wt=2 | rxq=1 + +| tc06-1518B-2t2c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 1518B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${1518} | wt=2 | rxq=1 + +| tc07-9000B-2t2c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 9000B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${9000} | wt=2 | rxq=1 + +| tc08-IMIX-2t2c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ +| | ... | trial throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=IMIX_v4_1 | wt=2 | rxq=1 + +| tc09-64B-4t4c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | 4 phy cores, 2 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 64B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${64} | wt=4 | rxq=2 + +| tc10-1518B-4t4c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | 4 phy cores, 2 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 1518B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${1518} | wt=4 | rxq=2 + +| tc11-9000B-4t4c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | 4 phy cores, 2 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ +| | ... | trial throughput test. +| | ... +| | [Tags] | 9000B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=${9000} | wt=4 | rxq=2 + +| tc12-IMIX-4t4c-eth-l2xcbase-testpmd-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | 4 phy cores, 2 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ +| | ... | trial throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for eth-l2xcbase-testpmd +| | framesize=IMIX_v4_1 | wt=4 | rxq=2