From: Jan Gelety <jgelety@cisco.com>
Date: Tue, 24 May 2016 16:45:09 +0000 (+0200)
Subject: CIMANAGE-7: Bootstrap for csit-vpp-master-verify-semiweekly job
X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=commitdiff_plain;h=c44aa8b85d0131ffea431d11229043ba6aff162d

CIMANAGE-7: Bootstrap for csit-vpp-master-verify-semiweekly job

- run func and perf_long tests in three test loops
- updated REPO in /resources/tools/download_install_vpp_pkgs.sh

Change-Id: Iff459b7719380404a242c80821806a9450271adf
Signed-off-by: Jan Gelety <jgelety@cisco.com>
---

diff --git a/bootstrap-vpp-master-verify-semiweekly.sh b/bootstrap-vpp-master-verify-semiweekly.sh
new file mode 100644
index 0000000000..2c07d84d1f
--- /dev/null
+++ b/bootstrap-vpp-master-verify-semiweekly.sh
@@ -0,0 +1,429 @@
+#!/bin/bash
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a ght (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not usecopy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+set -x
+
+RETURN_STATUS=0
+
+cat /etc/hostname
+cat /etc/hosts
+
+export DEBIAN_FRONTEND=noninteractive
+sudo apt-get -y update
+sudo apt-get -y install libpython2.7-dev python-virtualenv
+
+PYBOT_ARGS="--noncritical MULTI_THREAD"
+
+ARCHIVE_ARTIFACTS=(log.html output.xml report.html output_perf_data.json)
+
+CUR_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+export PYTHONPATH=${CUR_DIR}
+
+
+# 1st step: Download and prepare VPP packages
+
+# Temporarily download VPP packages from nexus.fd.io
+rm -f *.deb
+if [ "${#}" -ne "0" ]; then
+    arr=(${@})
+    echo ${arr[0]}
+else
+    # Download the latest VPP build .deb install packages
+    echo Downloading VPP packages...
+    bash ./resources/tools/download_install_vpp_pkgs.sh --skip-install
+fi
+
+VPP_DEBS=(*.deb)
+echo ${VPP_DEBS[@]}
+
+VPP_VER=$(echo ${VPP_DEBS#vpp-})
+VPP_VER=$(echo ${VPP_VER%.deb})
+echo VPP version to be tested: ${VPP_VER}
+
+set +x
+echo "******************************************************************************"
+echo "1st step: Download VPP packages                                       FINISHED"
+echo "******************************************************************************"
+set -x
+
+
+# 2nd step: Start virtual env and install requirements
+
+echo Starting virtual env...
+virtualenv env
+. env/bin/activate
+
+echo Installing requirements...
+pip install -r requirements.txt
+
+set +x
+echo "******************************************************************************"
+echo "2nd step: Start virtual env and install requirements                  FINISHED"
+echo "******************************************************************************"
+set -x
+
+
+# 3rd step: Prepare VIRL system
+echo Preparing VIRL system...
+
+VIRL_SERVERS=("10.30.51.28" "10.30.51.29" "10.30.51.30")
+VIRL_SERVER=""
+
+VIRL_USERNAME=jenkins-in
+VIRL_PKEY=priv_key
+VIRL_SERVER_STATUS_FILE="status"
+VIRL_SERVER_EXPECTED_STATUS="PRODUCTION"
+
+SSH_OPTIONS="-i ${VIRL_PKEY} -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o BatchMode=yes -o LogLevel=error"
+
+function ssh_do() {
+    echo
+    echo "### "  ssh $@
+    ssh ${SSH_OPTIONS} $@
+}
+
+rm -f ${VIRL_PKEY}
+cat > ${VIRL_PKEY} <<EOF
+-----BEGIN RSA PRIVATE KEY-----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+-----END RSA PRIVATE KEY-----
+EOF
+chmod 600 ${VIRL_PKEY}
+
+#
+# Pick a random host from the array of VIRL servers, and attempt
+# to reach it and verify it's status.
+#
+# The server must be reachable, and have a "status" file with
+# the content "PRODUCTION", to be selected.
+#
+# If the server is not reachable, or does not have the correct
+# status, remove it from the array and start again.
+#
+# Abort if there are no more servers left in the array.
+#
+while [[ ! "$VIRL_SERVER" ]]
+do
+    num_hosts=${#VIRL_SERVERS[@]}
+    if [ $num_hosts == 0 ]
+    then
+        echo "No more VIRL candidate hosts available, failing."
+        exit 127
+    fi
+    element=$[ $RANDOM % $num_hosts ]
+    virl_server_candidate=${VIRL_SERVERS[$element]}
+    virl_server_status=$(ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${virl_server_candidate} cat $VIRL_SERVER_STATUS_FILE 2>&1)
+    echo VIRL HOST $virl_server_candidate status is \"$virl_server_status\"
+    if [ "$virl_server_status" == "$VIRL_SERVER_EXPECTED_STATUS" ]
+    then
+        # Candidate is in good status. Select this server.
+        VIRL_SERVER="$virl_server_candidate"
+    else
+        # Candidate is in bad status. Remove from array.
+        VIRL_SERVERS=("${VIRL_SERVERS[@]:0:$element}" "${VIRL_SERVERS[@]:$[$element+1]}")
+    fi
+done
+
+
+VIRL_DIR_LOC="/tmp"
+VPP_DEBS_VIRL=(${VPP_DEBS[@]})
+
+# Prepend directory location at remote host to deb file list
+for index in "${!VPP_DEBS_VIRL[@]}"; do
+    VPP_DEBS_VIRL[${index}]=${VIRL_DIR_LOC}/${VPP_DEBS_VIRL[${index}]}
+done
+
+echo "Updated file names: " ${VPP_DEBS_VIRL[@]}
+
+cat ${VIRL_PKEY}
+# Copy the files to VIRL host
+scp ${SSH_OPTIONS} *.deb \
+    ${VIRL_USERNAME}@${VIRL_SERVER}:${VIRL_DIR_LOC}/
+
+result=$?
+if [ "${result}" -ne "0" ]; then
+    echo "Failed to copy vpp deb files to virl host"
+    echo ${result}
+    exit ${result}
+fi
+
+# Start a simulation on VIRL server
+echo "Starting simulation on VIRL server"
+
+function stop_virl_simulation {
+    ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${VIRL_SERVER}\
+        "stop-testcase ${VIRL_SID}"
+}
+
+VIRL_SID=$(ssh ${SSH_OPTIONS} \
+    ${VIRL_USERNAME}@${VIRL_SERVER} \
+    "start-testcase -c double-ring-nested ${VPP_DEBS_VIRL[@]}")
+retval=$?
+if [ "$?" -ne "0" ]; then
+    echo "VIRL simulation start failed"
+    exit ${retval}
+fi
+
+if [[ ! "${VIRL_SID}" =~ session-[a-zA-Z0-9_]{6} ]]; then
+    echo "No VIRL session ID reported."
+    exit 127
+fi
+
+# Upon script exit, cleanup the VIRL simulation execution
+trap stop_virl_simulation EXIT
+echo ${VIRL_SID}
+
+ssh_do ${VIRL_USERNAME}@${VIRL_SERVER} cat /scratch/${VIRL_SID}/topology.yaml
+
+# Download the topology file from VIRL session
+scp ${SSH_OPTIONS} \
+    ${VIRL_USERNAME}@${VIRL_SERVER}:/scratch/${VIRL_SID}/topology.yaml \
+    topologies/enabled/topology_VIRL.yaml
+
+retval=$?
+if [ "$?" -ne "0" ]; then
+    echo "Failed to copy topology file from VIRL simulation"
+    exit ${retval}
+fi
+
+set +x
+echo "******************************************************************************"
+echo "3rd step: Start the simulation on the VIRL server                     FINISHED"
+echo "******************************************************************************"
+set -x
+
+
+# 4th step: Run functional test suites
+
+RC=0
+MORE_FAILS=0
+
+echo Running functional tests on the VIRL system...
+
+# There are used three iterations of functional tests there
+# to check the stability and reliability of the results.
+for test_set in 1 2 3
+do
+    echo
+    echo Functional test loop: ${test_set}
+    echo
+
+    pybot -L TRACE \
+        -v TOPOLOGY_PATH:topologies/enabled/topology_VIRL.yaml \
+        --include vm_envAND3_node_single_link_topo \
+        --include vm_envAND3_node_double_link_topo \
+        --exclude PERFTEST \
+        --noncritical EXPECTED_FAILING \
+        --output log_func_test_set${test_set} \
+        tests/
+    PARTIAL_RC=$(echo $?)
+    if [ ${PARTIAL_RC} -eq 250 ]; then
+        MORE_FAILS=1
+    fi
+    RC=$((RC+PARTIAL_RC))
+done
+
+set +x
+echo "******************************************************************************"
+echo "4th step: Run functional tests                                        FINISHED"
+echo "******************************************************************************"
+set -x
+
+
+# 5th step: Reserve and prepare HW system
+
+echo Making a reservation for the HW system...
+
+# Space separated list of available testbeds, described by topology files
+TOPOLOGIES="topologies/available/lf_testbed1-X710-X520.yaml \
+            topologies/available/lf_testbed2-X710-X520.yaml \
+            topologies/available/lf_testbed3-X710-X520.yaml"
+
+# Reservation dir
+RESERVATION_DIR="/tmp/reservation_dir"
+INSTALLATION_DIR="/tmp/install_dir"
+
+WORKING_TOPOLOGY=""
+
+# We iterate over available topologies and wait until we reserve topology
+while :; do
+    for TOPOLOGY in ${TOPOLOGIES};
+    do
+        python ${CUR_DIR}/resources/tools/topo_reservation.py -t ${TOPOLOGY}
+        if [ $? -eq 0 ]; then
+            WORKING_TOPOLOGY=${TOPOLOGY}
+            echo "Reserved: ${WORKING_TOPOLOGY}"
+            break
+        fi
+    done
+
+    if [ ! -z "${WORKING_TOPOLOGY}" ]; then
+        # Exit the infinite while loop if we made a reservation
+        break
+    fi
+
+    # Wait ~3minutes before next try
+    SLEEP_TIME=$[ ( $RANDOM % 20 ) + 180 ]s
+    echo "Sleeping ${SLEEP_TIME}"
+    sleep ${SLEEP_TIME}
+done
+
+function cancel_all {
+    python ${CUR_DIR}/resources/tools/topo_installation.py -c -d ${INSTALLATION_DIR} -t $1
+    python ${CUR_DIR}/resources/tools/topo_reservation.py -c -t $1
+}
+
+# Upon script exit, cleanup the VIRL simulation execution
+# and cancel the reservation and installation of HW system
+# and delete all vpp packages.
+trap "stop_virl_simulation; cancel_all ${WORKING_TOPOLOGY}" EXIT
+
+python ${CUR_DIR}/resources/tools/topo_installation.py -t ${WORKING_TOPOLOGY} \
+                                                       -d ${INSTALLATION_DIR} \
+                                                       -p ${VPP_DEBS[@]}
+
+if [ $? -eq 0 ]; then
+    echo "VPP Installed on hosts from: ${WORKING_TOPOLOGY}"
+else
+    echo "Failed to copy vpp deb files to DUTs"
+    exit 1
+fi
+
+set +x
+echo "******************************************************************************"
+echo "5th step: Making a reservation for HW system                          FINISHED"
+echo "******************************************************************************"
+set -x
+
+# 6th step: Run performance tests
+
+# Performance tests on HW system
+echo Performance tests on HW system
+
+pybot ${PYBOT_ARGS} \
+    -L TRACE \
+    -v TOPOLOGY_PATH:${WORKING_TOPOLOGY} \
+    --include perftest_long \
+    --output log_perf_test_set \
+    tests/
+
+PARTIAL_RC=$(echo $?)
+if [ ${PARTIAL_RC} -eq 250 ]; then
+    MORE_FAILS=1
+fi
+RC=$((RC+PARTIAL_RC))
+
+set +x
+echo "******************************************************************************"
+echo "6th step: Run performance tests                                       FINISHED"
+echo "******************************************************************************"
+set -x
+
+
+# Set RETURN_STATUS=1 if some critical test failed
+if [ ! ${RC} -eq 0 ]; then
+        RETURN_STATUS=1
+fi
+
+# Log the final result
+if [ ${RC} -eq 0 ]; then
+    set +x
+    echo
+    echo "=============================================================================="
+    echo "Final result of all test loops:                                       | PASS |"
+    echo "All critical tests have passed."
+    echo "=============================================================================="
+    echo
+    set -x
+elif [ ${MORE_FAILS} -eq 0 ]; then
+    if [ ${RC} -eq 1 ]; then
+        HLP_STR="test has"
+    else
+        HLP_STR="tests have"
+    fi
+    set +x
+    echo
+    echo "=============================================================================="
+    echo "Final result of all test loops:                                       | FAIL |"
+    echo "${RC} critical ${HLP_STR} failed."
+    echo "=============================================================================="
+    echo
+    set -x
+else
+    set +x
+    echo
+    echo "=============================================================================="
+    echo "Final result of all test loops:                                       | FAIL |"
+    echo "More then 250 critical tests have failed in one test loop."
+    echo "=============================================================================="
+    echo
+    set -x
+fi
+
+
+# 7th step: Post-processing test data
+echo Post-processing test data...
+
+# Getting JSON perf data output
+python ${CUR_DIR}/resources/tools/robot_output_parser.py \
+       -i ${CUR_DIR}/log_perf_test_set.xml \
+       -o ${CUR_DIR}/output_perf_data.json \
+       -v ${VPP_VER}
+if [ ! $? -eq 0 ]; then
+    echo "Parsing ${CUR_DIR}/log_perf_test_set.xml failed"
+fi
+
+# Rebot output post-processing
+rebot --output output.xml ./log_func_test_set1.xml ./log_func_test_set2.xml \
+    ./log_func_test_set3.xml ./log_perf_test_set.xml
+
+# Remove unnecessary files
+rm -f ./log_test_set1.xml ./log_test_set2.xml ./log_test_set3.xml \
+    ./log_perf_test_set.xml
+
+# Archive artifacts
+mkdir archive
+for i in ${ARCHIVE_ARTIFACTS[@]}; do
+    cp $( readlink -f ${i} | tr '\n' ' ' ) archive/
+done
+
+echo Post-processing finished.
+
+exit ${RETURN_STATUS}
diff --git a/resources/tools/download_install_vpp_pkgs.sh b/resources/tools/download_install_vpp_pkgs.sh
index 025be87720..20a1ae42f5 100755
--- a/resources/tools/download_install_vpp_pkgs.sh
+++ b/resources/tools/download_install_vpp_pkgs.sh
@@ -20,7 +20,7 @@ trap 'rm -f *.deb.md5;rm -f *.deb; exit' ERR
 
 URL="https://nexus.fd.io/service/local/artifact/maven/content"
 VER="RELEASE"
-REPO="fd.io.dev"
+REPO="fd.io.master.ubuntu.trusty.main"
 GROUP="io.fd.vpp"
 ARTIFACTS="vpp vpp-dbg vpp-dev vpp-dpdk-dev vpp-dpdk-dkms vpp-lib"
 PACKAGE="deb deb.md5"