From: Jan Gelety Date: Fri, 24 Mar 2017 12:10:03 +0000 (+0100) Subject: CSIT-550: Add x520 L2 x-connect perf test with 2 VMs per DUT X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=commitdiff_plain;h=c62252736158be8cf740905c35400085d3478369 CSIT-550: Add x520 L2 x-connect perf test with 2 VMs per DUT - 10ge2p1x520-eth-l2xcbase-eth-4vhost-2vm-ndrpdrdisc Change-Id: I9dc6888d5b94922835fa0fcae2b0763b3a1fa9a3 Signed-off-by: Jan Gelety --- diff --git a/resources/libraries/robot/performance.robot b/resources/libraries/robot/performance.robot index 58c8f568d1..c275f77a22 100644 --- a/resources/libraries/robot/performance.robot +++ b/resources/libraries/robot/performance.robot @@ -779,6 +779,48 @@ | | L2 setup xconnect on DUT | ${dut2} | ${dut2_if2} | ${vhost_if2} | | All Vpp Interfaces Ready Wait | ${nodes} +| L2 xconnect with Vhost-User for '${nr}' initialized in a 3-node circular topology +| | [Documentation] +| | ... | Create pairs of Vhost-User interfaces on all defined VPP nodes. Cross +| | ... | connect each Vhost interface with one physical interface or virtual +| | ... | interface to create a chain accross DUT node. +| | ... +| | ... | *Arguments:* +| | ... | _None_ +| | ... +| | ... | *Note:* +| | ... | Socket paths for VM are defined in following format: +| | ... | - /tmp/sock-${VM_ID}-1 +| | ... | - /tmp/sock-${VM_ID}-2 +| | ... +| | ... | *Example:* +| | ... +| | ... | \| L2 xconnect with Vhost-User for '2' initialized in a 3-node \ +| | ... | circular topology \| +| | ... +| | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 +| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 +| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 +| | | ${prev_index}= | Evaluate | ${number}-1 +| | | VPP Vhost interfaces for L2BD forwarding are setup | ${dut1} +| | | ... | ${sock1} | ${sock2} | dut1-vhost-${number}-if1 +| | | ... | dut1-vhost-${number}-if2 +| | | ${dut1_xconnect_if1}= | Set Variable If | ${number}==1 | ${dut1_if1} +| | | ... | ${dut1-vhost-${prev_index}-if2} +| | | L2 setup xconnect on DUT | ${dut1} | ${dut1_xconnect_if1} +| | | ... | ${dut1-vhost-${number}-if1} +| | | VPP Vhost interfaces for L2BD forwarding are setup | ${dut2} +| | | ... | ${sock1} | ${sock2} | dut2-vhost-${number}-if1 +| | | ... | dut2-vhost-${number}-if2 +| | | ${dut2_xconnect_if1}= | Set Variable If | ${number}==1 | ${dut2_if1} +| | | ... | ${dut2-vhost-${prev_index}-if2} +| | | L2 setup xconnect on DUT | ${dut2} | ${dut2_xconnect_if1} +| | | ... | ${dut2-vhost-${number}-if1} +| | | Run Keyword If | ${number}==${nr} | L2 setup xconnect on DUT +| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | ${dut1_if2} +| | | Run Keyword If | ${number}==${nr} | L2 setup xconnect on DUT +| | | ... | ${dut2} | ${dut2-vhost-${number}-if2} | ${dut2_if2} + | L2 xconnect with Vhost-User and VLAN initialized in a 3-node circular topology | | [Documentation] | | ... | Create two Vhost-User interfaces on all defined VPP nodes. Cross diff --git a/tests/perf/10ge2p1x520-eth-l2xcbase-eth-2vhost-1vm-ndrpdrdisc.robot b/tests/perf/10ge2p1x520-eth-l2xcbase-eth-2vhost-1vm-ndrpdrdisc.robot index 17a339328a..97f0bf511f 100644 --- a/tests/perf/10ge2p1x520-eth-l2xcbase-eth-2vhost-1vm-ndrpdrdisc.robot +++ b/tests/perf/10ge2p1x520-eth-l2xcbase-eth-2vhost-1vm-ndrpdrdisc.robot @@ -91,7 +91,7 @@ | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2} | | And Setup scheduler policy for VPP on all DUTs | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} @@ -123,7 +123,7 @@ | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2} | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} | | ... | ${perf_pdr_loss_acceptance} @@ -157,7 +157,7 @@ | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2} | | And Setup scheduler policy for VPP on all DUTs | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} @@ -189,7 +189,7 @@ | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2} | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} | | ... | ${perf_pdr_loss_acceptance} @@ -199,7 +199,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \ | | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps. +| | ... | size using binary search start at 10GE linerate, step 10kpps. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 1T1C | STHREAD | NDRDISC | | ${framesize}= | Set Variable | IMIX_v4_1 @@ -224,7 +224,7 @@ | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2} | | And Setup scheduler policy for VPP on all DUTs | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} @@ -232,7 +232,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \ | | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps, LT=0.5%. +| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | IMIX_v4_1 @@ -257,7 +257,7 @@ | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2} | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} | | ... | ${perf_pdr_loss_acceptance} @@ -291,7 +291,7 @@ | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2} | | And Setup scheduler policy for VPP on all DUTs | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} @@ -323,7 +323,7 @@ | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2} | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} | | ... | ${perf_pdr_loss_acceptance} @@ -357,7 +357,7 @@ | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2} | | And Setup scheduler policy for VPP on all DUTs | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} @@ -389,7 +389,7 @@ | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2} | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} | | ... | ${perf_pdr_loss_acceptance} @@ -399,7 +399,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \ | | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps. +| | ... | size using binary search start at 10GE linerate, step 10kpps. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | IMIX_v4_1 @@ -424,7 +424,7 @@ | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2} | | And Setup scheduler policy for VPP on all DUTs | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} @@ -432,7 +432,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \ | | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps, LT=0.5%. +| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | IMIX_v4_1 @@ -457,7 +457,7 @@ | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2} | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} | | ... | ${perf_pdr_loss_acceptance} @@ -491,7 +491,7 @@ | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2} | | And Setup scheduler policy for VPP on all DUTs | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} @@ -523,7 +523,7 @@ | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2} | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} | | ... | ${perf_pdr_loss_acceptance} @@ -557,7 +557,7 @@ | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2} | | And Setup scheduler policy for VPP on all DUTs | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} @@ -589,7 +589,7 @@ | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2} | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} | | ... | ${perf_pdr_loss_acceptance} @@ -599,7 +599,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \ | | ... | 2 receive queues per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps. +| | ... | size using binary search start at 10GE linerate, step 10kpps. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | IMIX_v4_1 @@ -624,7 +624,7 @@ | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2} | | And Setup scheduler policy for VPP on all DUTs | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} @@ -632,7 +632,7 @@ | | [Documentation] | | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \ | | ... | 2 receive queues per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 5kpps, LT=0.5%. +| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | IMIX_v4_1 @@ -657,9 +657,8 @@ | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2} | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} | | ... | ${perf_pdr_loss_acceptance} | | ... | ${perf_pdr_loss_acceptance_type} - diff --git a/tests/perf/10ge2p1x520-eth-l2xcbase-eth-4vhost-2vm-ndrpdrdisc.robot b/tests/perf/10ge2p1x520-eth-l2xcbase-eth-4vhost-2vm-ndrpdrdisc.robot new file mode 100644 index 0000000000..d58458f72b --- /dev/null +++ b/tests/perf/10ge2p1x520-eth-l2xcbase-eth-4vhost-2vm-ndrpdrdisc.robot @@ -0,0 +1,565 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance.robot +| Library | resources.libraries.python.NodePath +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC +| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE | VHOST | VM +| ... +| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| Suite Teardown | 3-node Performance Suite Teardown +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test with vhost and VM with dpdk-testpmd teardown +| ... | ${min_rate}pps | ${framesize} | 3-node-xconnect +| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} +| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connects. Qemu Guests are connected to VPP via vhost-user interfaces. +| ... | Guests are running DPDK testpmd interconnecting vhost-user interfaces +| ... | using 5 cores pinned to cpus 6-10 and 11-15 and 2048M memory. Testpmd is +| ... | using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 +| ... | cores dedicated for io), forwarding mode is set to io, rxd/txd=256, +| ... | burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using either binary search or linear search +| ... | algorithms with configured starting rate and final step that determines +| ... | throughput measurement resolution. Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +#CPU settings +| ${system_cpus}= | ${1} +| ${vpp_cpus}= | ${5} +| ${vm_cpus}= | ${5} + +*** Test Cases *** +| tc01-64B-1t1c-eth-l2xcbase-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps. +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 xconnect with Vhost-User for '2' initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc02-64B-1t1c-eth-l2xcbase-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 xconnect with Vhost-User for '2' initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc03-1518B-1t1c-eth-l2xcbase-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps. +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 xconnect with Vhost-User for '2' initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc04-1518B-1t1c-eth-l2xcbase-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 xconnect with Vhost-User for '2' initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc05-IMIX-1t1c-eth-l2xcbase-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \ +| | ... | size using binary search start at 10GE linerate, step 10kpps. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 xconnect with Vhost-User for '2' initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc06-IMIX-1t1c-eth-l2xcbase-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \ +| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 xconnect with Vhost-User for '2' initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc07-64B-2t2c-eth-l2xcbase-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps. +| | [Tags] | 2T2C | MTHREAD | NDRDISC +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 xconnect with Vhost-User for '2' initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc08-64B-2t2c-eth-l2xcbase-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 xconnect with Vhost-User for '2' initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc09-1518B-2t2c-eth-l2xcbase-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps. +| | [Tags] | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 xconnect with Vhost-User for '2' initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc10-1518B-2t2c-eth-l2xcbase-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 xconnect with Vhost-User for '2' initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc11-IMIX-2t2c-eth-l2xcbase-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \ +| | ... | size using binary search start at 10GE linerate, step 10kpps. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | [Tags] | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 xconnect with Vhost-User for '2' initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc12-IMIX-2t2c-eth-l2xcbase-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \ +| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 xconnect with Vhost-User for '2' initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc13-64B-4t4c-eth-l2xcbase-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps. +| | [Tags] | 4T4C | MTHREAD | NDRDISC +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 xconnect with Vhost-User for '2' initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc14-64B-4t4c-eth-l2xcbase-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 xconnect with Vhost-User for '2' initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc15-1518B-4t4c-eth-l2xcbase-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps. +| | [Tags] | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 xconnect with Vhost-User for '2' initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc16-1518B-4t4c-eth-l2xcbase-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 1518 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 xconnect with Vhost-User for '2' initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc17-IMIX-4t4c-eth-l2xcbase-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \ +| | ... | size using binary search start at 10GE linerate, step 10kpps. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | [Tags] | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 xconnect with Vhost-User for '2' initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc18-IMIX-4t4c-eth-l2xcbase-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \ +| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 xconnect with Vhost-User for '2' initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}