From: Michal Cmarada <mcmarada@cisco.com>
Date: Thu, 7 Feb 2019 08:47:13 +0000 (+0100)
Subject: Re-enabling Honeycomb two IPs same subnet tests
X-Git-Url: https://gerrit.fd.io/r/gitweb?p=csit.git;a=commitdiff_plain;h=fa7eba4ce1949e79a679ea1683d022596d89e496

Re-enabling Honeycomb two IPs same subnet tests

 - reordering tests so unnumbered interface tests
   don't break following tests
 - removing EXPECTED_FAILING for fixed tests

Change-Id: Ic24d878849ab4f451e2fb59856c222167cb35d8f
Signed-off-by: Michal Cmarada <mcmarada@cisco.com>
---

diff --git a/tests/honeycomb/func/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot
index 029d7db86b..50fd656346 100644
--- a/tests/honeycomb/func/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot
+++ b/tests/honeycomb/func/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot
@@ -220,7 +220,34 @@
 | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
 | | ... | ${tg_to_dut_if1} | ${dut_to_tg_if1_mac}
 
-| TC11: Honeycomb can configure unnumbered interface
+| TC11: Honeycomb fails to configure two IPv4 addresses from the same subnet
+| | [Documentation] | Check if Honeycomb can configure two IPv4 addresses in\
+| | ... | the same subnet onto a single interface. It should not be possible.
+| | ...
+| | [Teardown] | Honeycomb removes interface IPv4 addresses | ${node}
+| | ... | ${interface}
+| | ...
+| | When Honeycomb sets interface IPv4 address with prefix
+| | ... | ${node} | ${interface} | 192.168.0.1 | ${9}
+| | Then Honeycomb fails to add interface IPv4 address
+| | ... | ${node} | ${interface} | 192.168.0.2 | ${9}
+| | And Honeycomb fails to add interface IPv4 address
+| | ... | ${node} | ${interface} | 192.232.0.2 | ${9}
+
+| TC12: Honeycomb fails to configure two IPv6 addresses from the same subnet
+| | [Documentation] | Check if Honeycomb can configure two IPv6 addresses in\
+| | ... | the same subnet onto a single interface. It should not be possible.
+| | ...
+| | [Teardown] | Honeycomb removes interface IPv6 addresses | ${node}
+| | ... | ${interface}
+| | When Honeycomb sets interface IPv6 address
+| | ... | ${node} | ${interface} | 10::FF10 | ${64}
+| | Then Honeycomb fails to add interface IPv6 address
+| | ... | ${node} | ${interface} | 10::FF11 | ${64}
+| | And Honeycomb fails to add interface IPv6 address
+| | ... | ${node} | ${interface} | 10::FFFF | ${64}
+
+| TC13: Honeycomb can configure unnumbered interface
 | | [Documentation] | Check if Honeycomb can configure an unnumbered interface\
 | | ... | on a physical interface, borrowing the IP address of another physical\
 | | ... | interface.
@@ -244,7 +271,7 @@
 | | ... | ${node} | ${interface} | ${ipv4_address}
 | | ... | ${ipv4_prefix} | ${ipv4_mask}
 
-| TC12: Honeycomb removes interface unnumbered configuration
+| TC14: Honeycomb removes interface unnumbered configuration
 | | [Documentation] | Check if Honeycomb can remove unnumbered configuration\
 | | ... | from an interface.
 | | ...
@@ -272,39 +299,6 @@
 | | And IPv4 address from Honeycomb should be empty | ${node} | ${interface}
 | | And ipv4 address from VAT should be empty | ${node} | ${interface}
 
-| TC13: Honeycomb fails to configure two IPv4 addresses from the same subnet
-| | [Documentation] | Check if Honeycomb can configure two IPv4 addresses in\
-| | ... | the same subnet onto a single interface. It should not be possible.
-| | ...
-| | [Teardown] | Honeycomb removes interface IPv4 addresses | ${node}
-| | ... | ${interface}
-| | ...
-| | [Tags] | EXPECTED_FAILING
-| | ...
-# VPP API does not configure the second address, but returns success. VPP-649
-| | When Honeycomb sets interface IPv4 address with prefix
-| | ... | ${node} | ${interface} | 192.168.0.1 | ${9}
-| | Then Honeycomb fails to add interface IPv4 address
-| | ... | ${node} | ${interface} | 192.168.0.2 | ${9}
-| | And Honeycomb fails to add interface IPv4 address
-| | ... | ${node} | ${interface} | 192.232.0.2 | ${9}
-
-| TC14: Honeycomb fails to configure two IPv6 addresses from the same subnet
-| | [Documentation] | Check if Honeycomb can configure two IPv6 addresses in\
-| | ... | the same subnet onto a single interface. It should not be possible.
-| | ...
-| | [Tags] | EXPECTED_FAILING
-| | ...
-# VPP API does not configure the second address, but returns success. VPP-649
-| | [Teardown] | Honeycomb removes interface IPv6 addresses | ${node}
-| | ... | ${interface}
-| | When Honeycomb sets interface IPv6 address
-| | ... | ${node} | ${interface} | 10::FF10 | ${64}
-| | Then Honeycomb fails to add interface IPv6 address
-| | ... | ${node} | ${interface} | 10::FF11 | ${64}
-| | And Honeycomb fails to add interface IPv6 address
-| | ... | ${node} | ${interface} | 10::FFFF | ${64}
-
 *** Keywords ***
 | Multiple IP Address Test Teardown
 | | [Arguments] | ${node} | ${interface}