From 4aaf57b2317e0f3e8dcc2f313a6503ea72e89e41 Mon Sep 17 00:00:00 2001 From: Peter Mikus Date: Wed, 25 May 2016 13:30:21 +0200 Subject: [PATCH] IPv4 COP - performance - JIRA: CSIT-105 - create topology with COP white-list applied on interfaces using IPv4 in 3-node topology - create necessary keywords to be used in test cases - create ipv4_cop test cases (64B, 1518B, 9000B) Change-Id: I0aeaaf3c295e9691f99fc2e03c57f67e7d568ed4 Signed-off-by: Peter Mikus --- .../performance/Long_IPv4_Cop_Intel-X520-DA2.robot | 544 +++++++++++++++++++++ .../Short_IPv4_Cop_Intel-X520-DA2.robot | 222 +++++++++ 2 files changed, 766 insertions(+) create mode 100644 tests/suites/performance/Long_IPv4_Cop_Intel-X520-DA2.robot create mode 100644 tests/suites/performance/Short_IPv4_Cop_Intel-X520-DA2.robot diff --git a/tests/suites/performance/Long_IPv4_Cop_Intel-X520-DA2.robot b/tests/suites/performance/Long_IPv4_Cop_Intel-X520-DA2.robot new file mode 100644 index 0000000000..45245d92d9 --- /dev/null +++ b/tests/suites/performance/Long_IPv4_Cop_Intel-X520-DA2.robot @@ -0,0 +1,544 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance.robot +| Library | resources.libraries.python.Cop +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4 +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4 +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_LONG +| ... | NIC_Intel-X520-DA2 +| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model +| ... | L3 | Intel-X520-DA2 +| Suite Teardown | 3-node Performance Suite Teardown +| Test Setup | Setup all DUTs before test +| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs +| Documentation | *Throughput search suite (based on RFC2544).* +| ... +| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link +| ... | between nodes. Traffic profile contain 2 L3 streams (1 stream per +| ... | direction). Packets contain Ethernet header, IPv4 header, +| ... | IP protocol=61 and random payload. Ethernet header MAC addresses are +| ... | matching MAC addresses of the TG node. COP (whitelist) is applied +| ... | on link between TG - DUT1 and DUT2 - TG. Additional ipv4 fib table with +| ... | index 1 is created and single entry added to permit all the +| ... | traffic (subnet /24). + +*** Test Cases *** +| Find NDR by using RFC2544 binary search and 64B frames through IPv4 forwarding with COP in 3-node topology +| | [Documentation] +| | ... | Find throughput with non drop rate for 64B frames by using +| | ... | binary search with threshold 0.1Mpps. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR +| | ${framesize}= | Set Variable | 64 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| Find PDR by using RFC2544 binary search and 64B frames through IPv4 forwarding with COP in 3-node topology +| | [Documentation] +| | ... | Find throughput with partial drop rate for 64B frames by using +| | ... | binary search with threshold 0.1Mpps. Loss acceptance is set to 0.5 +| | ... | percent of transmitted packets. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR +| | ${framesize}= | Set Variable | 64 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + +| Find NDR by using RFC2544 binary search and 1518B frames through IPv4 forwarding with COP in 3-node topology +| | [Documentation] +| | ... | Find throughput with non drop rate for 1518B frames by using +| | ... | binary search with threshold 10,000pps. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR +| | ${framesize}= | Set Variable | 1518 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| Find PDR by using RFC2544 binary search and 1518B frames through IPv4 forwarding with COP in 3-node topology +| | [Documentation] +| | ... | Find throughput with partial drop rate for 1518B frames by using +| | ... | binary search with threshold 10,000pps. Loss acceptance is set to 0.5 +| | ... | percent of transmitted packets. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR +| | ${framesize}= | Set Variable | 1518 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + +| Find NDR by using RFC2544 binary search and 9000B frames through IPv4 forwarding with COP in 3-node topology +| | [Documentation] +| | ... | Find throughput with non drop rate for 9000B frames by using +| | ... | binary search with threshold 5,000pps. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR +| | ${framesize}= | Set Variable | 9000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| Find PDR by using RFC2544 binary search and 9000B frames through IPv4 forwarding with COP in 3-node topology +| | [Documentation] +| | ... | Find throughput with partial drop rate for 9000B frames by using +| | ... | binary search with threshold of 5,000pps. Loss acceptance is set to +| | ... | 0.5 percent of transmitted packets. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR +| | ${framesize}= | Set Variable | 9000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + +| Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 64B frames through IPv4 forwarding with COP in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with non drop rate for 64B frames by using +| | ... | binary search with threshold 0.1Mpps. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR +| | ${framesize}= | Set Variable | 64 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 64B frames through IPv4 forwarding with COP in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with partial drop rate for 64B frames by +| | ... | using binary search with threshold 0.1Mpps. Loss acceptance is set to +| | ... | 0.5 percent of transmitted packets. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 64 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + +| Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 1518B frames through IPv4 forwarding with COP in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with non drop rate for 1518B frames by +| | ... | using binary search with threshold 10,000pps. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR +| | ${framesize}= | Set Variable | 1518 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 1518B frames through IPv4 forwarding with COP in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with partial drop rate for 1518B frames by +| | ... | using binary search with threshold 10,000pps. Loss acceptance is set +| | ... | to 0.5 percent of transmitted packets. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 1518 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + +| Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 9000B frames through IPv4 forwarding with COP in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with non drop rate for 9000B frames by +| | ... | using binary search with threshold 5,000pps. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR +| | ${framesize}= | Set Variable | 9000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 9000B frames through IPv4 forwarding with COP in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with partial drop rate for 9000B frames by +| | ... | using binary search with threshold 5,000pps. Loss acceptance is set +| | ... | to 0.5 percent of transmitted packets. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 9000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + +| Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 64B frames through IPv4 forwarding with COP in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 64B +| | ... | frames by using binary search with threshold 0.1Mpps. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR +| | ${framesize}= | Set Variable | 64 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| Find PDR with 4 cores and rss 2 by using RFC2544 binary search and 64B frames through IPv4 forwarding with COP in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with partial drop rate for 64B +| | ... | frames by using binary search with threshold 0.1Mpps. Loss acceptance +| | ... | is set to 0.5 percent of transmitted packets. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 64 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + +| Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 1518B frames through IPv4 forwarding with COP in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 1518B +| | ... | frames by using binary search with threshold 10,000pps. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR +| | ${framesize}= | Set Variable | 1518 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| Find PDR with 4 cores and rss 2 by using RFC2544 binary search and 1518B frames through IPv4 forwarding with COP in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with partial drop rate for 1518B +| | ... | frames by using binary search with threshold 10,000pps. Loss +| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 1518 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + +| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 9000B frames through IPv4 forwarding with COP in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 9000B +| | ... | frames by using binary search with threshold 5,000pps. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR +| | ${framesize}= | Set Variable | 9000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| Find PDR with 4 cores and rss 2 by using RFC2544 linear search and 9000B frames through IPv4 forwarding with COP in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with partial drop rate for 9000B +| | ... | frames by using binary search with threshold 5,000pps. Loss +| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR +| | ${framesize}= | Set Variable | 9000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} +| | ... | ${glob_loss_acceptance} +| | ... | ${glob_loss_acceptance_type} + diff --git a/tests/suites/performance/Short_IPv4_Cop_Intel-X520-DA2.robot b/tests/suites/performance/Short_IPv4_Cop_Intel-X520-DA2.robot new file mode 100644 index 0000000000..c84b6938a4 --- /dev/null +++ b/tests/suites/performance/Short_IPv4_Cop_Intel-X520-DA2.robot @@ -0,0 +1,222 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance.robot +| Library | resources.libraries.python.Cop +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4 +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4 +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_SHORT +| ... | NIC_Intel-X520-DA2 +| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model +| ... | L3 | Intel-X520-DA2 +| Suite Teardown | 3-node Performance Suite Teardown +| Test Setup | Setup all DUTs before test +| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs +| Documentation | Minimal throughput acceptance test cases + +*** Test Cases *** +| 1core VPP passes 64B frames through IPv4 forwarding with COP at 2x 3.5Mpps in 3-node topology +| | [Documentation] +| | ... | VPP with 1 core should pass 64B frames through IPv4 forwarding +| | ... | at 2x 3.5Mpps in 3-node topology +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | ${framesize}= | Set Variable | 64 +| | ${duration}= | Set Variable | 10 +| | ${rate}= | Set Variable | 3.5mpps +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 + +| 1core VPP passes 1518B frames through IPv4 forwarding with COP at 2x 812,743pps in 3-node topology +| | [Documentation] +| | ... | VPP with 1 core should pass 1518B frames through IPv4 forwarding +| | ... | at 2x 812,743pps (2x 10Gbps) in 3-node topology with COP. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | ${framesize}= | Set Variable | 1518 +| | ${duration}= | Set Variable | 10 +| | ${rate}= | Set Variable | 812743pps +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 + +| 1core VPP passes 9000B frames through IPv4 forwarding with COP at 2x 138,580pps in 3-node topology +| | [Documentation] +| | ... | VPP with 1 core should pass 9000B frames through IPv4 forwarding +| | ... | at 2x 138,580pps (2x 10Gbps) in 3-node topology with COP. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | ${framesize}= | Set Variable | 9000 +| | ${duration}= | Set Variable | 10 +| | ${rate}= | Set Variable | 138580pps +| | Given Add '1' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 + +| 2core VPP with rss 1 passes 64B frames through IPv4 forwarding with COP at 2x 7.5Mpps in 3-node topology +| | [Documentation] +| | ... | VPP with 2 cores should pass 64B frames through IPv4 forwarding +| | ... | at 2x 7.5Mpps (2x 10Gbps) in 3-node topology with COP. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ${framesize}= | Set Variable | 64 +| | ${duration}= | Set Variable | 10 +| | ${rate}= | Set Variable | 7.5mpps +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 + +| 2core VPP with rss 1 passes 1518B frames through IPv4 forwarding with COP at 2x 812,743pps in 3-node topology +| | [Documentation] +| | ... | VPP with 2 cores should pass 1518B frames through IPv4 forwarding +| | ... | at 2x 812,743pps (2x 10Gbps) in 3-node topology with COP. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ${framesize}= | Set Variable | 1518 +| | ${duration}= | Set Variable | 10 +| | ${rate}= | Set Variable | 812743pps +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 + +| 2core VPP with rss 1 passes 9000B frames through IPv4 forwarding with COP at 2x 138,580pps in 3-node topology +| | [Documentation] +| | ... | VPP with 2 cores should pass 9000B frames through IPv4 forwarding +| | ... | at 2x 138,580pps (2x 10Gbps) in 3-node topology with COP. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ${framesize}= | Set Variable | 9000 +| | ${duration}= | Set Variable | 10 +| | ${rate}= | Set Variable | 138580pps +| | Given Add '2' worker threads and rss '1' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 + +| 4core VPP with rss 2 passes 64B frames through IPv4 forwarding with COP at 2x 7.8Mpps in 3-node topology +| | [Documentation] +| | ... | VPP with 4 cores and rss 2 should pass 64B frames through IPv4 +| | ... | forwarding at 2x 7.8Mpps in 3-node topology with COP. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ${framesize}= | Set Variable | 64 +| | ${duration}= | Set Variable | 10 +| | ${rate}= | Set Variable | 7.8mpps +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 + +| 4core VPP with rss 2 passes 1518B frames through IPv4 forwarding with COP at 2x 812,743pps in 3-node topology +| | [Documentation] +| | ... | VPP with 4 cores and rss 2 should pass 1518B frames through IPv4 +| | ... | forwarding at 2x 812,743pps (2x 10Gbps) in 3-node topology with COP. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ${framesize}= | Set Variable | 1518 +| | ${duration}= | Set Variable | 10 +| | ${rate}= | Set Variable | 812743pps +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 + +| 4core VPP with rss 2 passes 9000B frames through IPv4 forwarding with COP at 2x 138,580pps in 3-node topology +| | [Documentation] +| | ... | VPP with 4 cores and rss 2 should pass 9000B frames through IPv4 +| | ... | forwarding at 2x 138,580pps (2x 10Gbps) in 3-node topology with COP. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ${framesize}= | Set Variable | 9000 +| | ${duration}= | Set Variable | 10 +| | ${rate}= | Set Variable | 138580pps +| | Given Add '4' worker threads and rss '2' without HTT to all DUTs +| | And Add all PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 -- 2.16.6