From 9c75b7bf5af74aa13cfa3aeeaf726cd965850fce Mon Sep 17 00:00:00 2001 From: Peter Mikus Date: Fri, 9 Aug 2019 12:46:42 +0000 Subject: [PATCH] Clean: Various libraries - Remove translate TC as they have no perf opposite - Remove unused keywords - Merge similar keywords / rename - Move keywords from perf library to categories Signed-off-by: Peter Mikus Change-Id: I6433006136e2497ad8fb17193aa20c578d836999 --- resources/libraries/robot/crypto/ipsec.robot | 73 +-- resources/libraries/robot/dpdk/default.robot | 8 +- resources/libraries/robot/features/acl.robot | 294 +++++++++ resources/libraries/robot/features/gbp.robot | 2 +- resources/libraries/robot/ip/ip6.robot | 86 +++ resources/libraries/robot/ip/nat.robot | 58 +- .../libraries/robot/l2/l2_bridge_domain.robot | 26 - resources/libraries/robot/l2/tagging.robot | 90 +-- resources/libraries/robot/overlay/gre.robot | 43 -- resources/libraries/robot/overlay/srv6.robot | 195 ++++++ resources/libraries/robot/overlay/vxlan.robot | 12 +- .../performance/performance_configuration.robot | 654 --------------------- .../robot/performance/performance_utils.robot | 15 +- resources/libraries/robot/shared/counters.robot | 10 +- resources/libraries/robot/shared/default.robot | 2 + resources/libraries/robot/shared/traffic.robot | 50 +- .../eth2p-ethip4-sfc-classifier-func.robot | 2 +- .../eth2p-ethip4-nsh-proxy-inbound-func.robot | 2 +- .../eth2p-ethip4-nsh-proxy-outbound-func.robot | 2 +- .../func/sff/eth2p-ethip4-sfc-sff-func.robot | 2 +- ...ad--dot1q-l2bdbasemaclrn-vlantrans21-func.robot | 221 ------- ...2p-dot1ad-l2bdbasemaclrn-vlantrans22-func.robot | 405 ------------- ...p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot | 189 ------ .../vpp/func/l2xc/eth2p-dot1ad-l2xcbase-func.robot | 3 +- .../eth2p-dot1ad-l2xcbase-vlantrans22-func.robot | 346 ----------- ...thip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot | 5 +- ...hip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot | 5 +- ...thip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot | 5 +- ...thip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot | 5 +- ...hip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot | 5 +- ...thip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot | 5 +- ...ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot | 5 +- ...thip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot | 5 +- ...ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot | 5 +- ...ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot | 5 +- ...thip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot | 5 +- ...ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot | 5 +- ...thip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot | 5 +- ...hip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot | 5 +- ...thip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot | 5 +- ...thip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot | 5 +- ...hip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot | 5 +- ...thip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot | 5 +- ...thip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot | 5 +- ...hip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot | 5 +- ...thip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot | 5 +- ...thip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot | 5 +- ...hip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot | 5 +- ...thip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot | 5 +- ...ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot | 5 +- ...thip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot | 5 +- ...ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot | 5 +- ...ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot | 5 +- ...thip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot | 5 +- ...ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot | 5 +- ...thip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot | 5 +- ...hip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot | 5 +- ...thip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot | 5 +- ...thip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot | 5 +- ...hip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot | 5 +- ...thip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot | 5 +- ...ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot | 5 +- ...ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot | 5 +- ...thip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot | 5 +- ...thip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot | 5 +- .../l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot | 3 +- .../l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot | 3 +- .../2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot | 2 +- 68 files changed, 848 insertions(+), 2150 deletions(-) create mode 100644 resources/libraries/robot/features/acl.robot delete mode 100644 resources/libraries/robot/overlay/gre.robot delete mode 100644 tests/vpp/func/l2bd/eth2p-dot1ad--dot1q-l2bdbasemaclrn-vlantrans21-func.robot delete mode 100644 tests/vpp/func/l2bd/eth2p-dot1ad-l2bdbasemaclrn-vlantrans22-func.robot delete mode 100644 tests/vpp/func/l2xc/eth2p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot delete mode 100644 tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-vlantrans22-func.robot diff --git a/resources/libraries/robot/crypto/ipsec.robot b/resources/libraries/robot/crypto/ipsec.robot index d5966a6cf5..f7d065ee4a 100644 --- a/resources/libraries/robot/crypto/ipsec.robot +++ b/resources/libraries/robot/crypto/ipsec.robot @@ -17,12 +17,8 @@ | Library | resources.libraries.python.IPsecUtil | Library | resources.libraries.python.IPUtil | Library | resources.libraries.python.IPv6Util -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.TrafficScriptExecutor | ... -| Resource | resources/libraries/robot/shared/default.robot -| ... -| Documentation | IPsec keywords +| Documentation | IPsec keywords. *** Keywords *** | Generate keys for IPSec @@ -182,50 +178,23 @@ | | ... | sa_id=${l_sa_id} | laddr_range=${l_ip} | | ... | raddr_range=${r_ip} | inbound=${FALSE} -| Send IPsec Packet and verify ESP encapsulation in received packet -| | [Documentation] | Send IPsec packet from TG to DUT. Receive IPsec packet\ -| | ... | from DUT on TG and verify ESP encapsulation. -| | ... -| | ... | *Arguments:* -| | ... | - node - TG node. Type: dictionary -| | ... | - interface - TG Interface. Type: string -| | ... | - dst_mac - Destination MAC. Type: string -| | ... | - crypto_alg - Encrytion algorithm. Type: enum -| | ... | - crypto_key - Encryption key. Type: string -| | ... | - integ_alg - Integrity algorithm. Type: enum -| | ... | - integ_key - Integrity key. Type: string -| | ... | - l_spi - Local SPI. Type: integer -| | ... | - r_spi - Remote SPI. Type: integer -| | ... | - l_ip - Local IP address. Type: string -| | ... | - r_ip - Remote IP address. Type: string -| | ... | - l_tunnel - Local tunnel IP address (optional). Type: string -| | ... | - r_tunnel - Remote tunnel IP address (optional). Type: string -| | ... -| | ... | *Example:* -| | ... | \| ${encr_alg}= \| Crypto Alg AES CBC 128 \| -| | ... | \| ${auth_alg}= \| Integ Alg SHA1 96 \| -| | ... | \| Send IPsec Packet and verify ESP encapsulation in received packet\ -| | ... | \| ${nodes['TG']} \| eth1 \ -| | ... | \| 52:54:00:d4:d8:22 \| ${encr_alg} \| sixteenbytes_key \ -| | ... | \| ${auth_alg} \| twentybytessecretkey \| ${1001} \| ${1000} \ -| | ... | \| 192.168.3.3 \| 192.168.4.4 \| 192.168.100.2 \| 192.168.100.3 \| -| | ... -| | [Arguments] | ${node} | ${interface} | ${dst_mac} | ${crypto_alg} -| | ... | ${crypto_key} | ${integ_alg} | ${integ_key} | ${l_spi} -| | ... | ${r_spi} | ${l_ip} | ${r_ip} | ${l_tunnel}=${None} -| | ... | ${r_tunnel}=${None} -| | ... -| | ${src_mac}= | Get Interface Mac | ${node} | ${interface} -| | ${if_name}= | Get Interface Name | ${node} | ${interface} -| | ${args}= | Traffic Script Gen Arg | ${if_name} | ${if_name} | ${src_mac} -| | ... | ${dst_mac} | ${l_ip} | ${r_ip} -| | ${crypto_alg_str}= | Get Crypto Alg Scapy Name | ${crypto_alg} -| | ${integ_alg_str}= | Get Integ Alg Scapy Name | ${integ_alg} -| | ${args}= | Catenate | ${args} | --crypto_alg ${crypto_alg_str} -| | ... | --crypto_key ${crypto_key} | --integ_alg ${integ_alg_str} -| | ... | --integ_key ${integ_key} | --l_spi ${l_spi} | --r_spi ${r_spi} -| | ${args}= | Set Variable If | "${l_tunnel}" == "${None}" | ${args} -| | ... | ${args} --src_tun ${l_tunnel} -| | ${args}= | Set Variable If | "${r_tunnel}" == "${None}" | ${args} -| | ... | ${args} --dst_tun ${r_tunnel} -| | Run Traffic Script On Node | ipsec.py | ${node} | ${args} +| Initialize IPSec in 3-node circular topology +| | [Documentation] +| | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular +| | ... | topology. Get the interface MAC addresses and setup ARP on all VPP +| | ... | interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG and +| | ... | DUT1-DUT2 links. Set routing for encrypted traffic on both DUT nodes +| | ... | with prefix /8 and next hop of neighbour DUT or TG interface IPv4 +| | ... | address. +| | ... +| | Set interfaces in path up +| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} +| | ... | ${dut1_if1_ip4} | 24 +| | VPP Interface Set IP Address | ${dut2} | ${dut2_if2} +| | ... | ${dut2_if2_ip4} | 24 +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | ${tg_if1_ip4} | ${tg_if1_mac} +| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | ${tg_if2_ip4} | ${tg_if2_mac} +| | Vpp Route Add | ${dut1} | ${laddr_ip4} | 8 | gateway=${tg_if1_ip4} +| | ... | interface=${dut1_if1} +| | Vpp Route Add | ${dut2} | ${raddr_ip4} | 8 | gateway=${tg_if2_ip4} +| | ... | interface=${dut2_if2} diff --git a/resources/libraries/robot/dpdk/default.robot b/resources/libraries/robot/dpdk/default.robot index 32ddcce63f..4b8ec0b08b 100644 --- a/resources/libraries/robot/dpdk/default.robot +++ b/resources/libraries/robot/dpdk/default.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2019 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -12,17 +12,13 @@ # limitations under the License. *** Settings *** -| Variables | resources/libraries/python/topology.py -| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.InterfaceUtil | Library | resources.libraries.python.CpuUtils -| Library | resources.libraries.python.DUTSetup -| Library | resources.libraries.python.TGSetup | Library | resources.libraries.python.DPDK.L2fwdTest | Library | resources.libraries.python.DPDK.L3fwdTest | Library | Collections *** Keywords *** - | Start L2FWD on all DUTs | | [Documentation] | Start the l2fwd with M worker threads and rxqueues N and | | ... | jumbo support frames on/off on all DUTs. diff --git a/resources/libraries/robot/features/acl.robot b/resources/libraries/robot/features/acl.robot new file mode 100644 index 0000000000..a70a34c2db --- /dev/null +++ b/resources/libraries/robot/features/acl.robot @@ -0,0 +1,294 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Documentation | ACL keywords. + +*** Keywords *** +| Configure MACIP ACLs +| | [Documentation] +| | ... | Configure MACIP ACL with required number of not-hitting permit ACEs +| | ... | plus two hitting ACEs for both traffic directions. +| | ... +| | ... | *Arguments:* +| | ... | - dut_node - DUT node. Type: dictionary +| | ... | - dut_if1 - DUT node interface1 name (Optional). Type: string +| | ... | - dut_if2 - DUT node interface2 name (Optional). Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Configure MACIP ACLs \| ${nodes['DUT1']} \| GigabitEthernet0/7/0 \ +| | ... | \| GigabitEthernet0/8/0 \| +| | ... +| | ... | _NOTE:_ This KW uses following test case variables: +| | ... | - src_ip_start - Source IP address start. Type: string +| | ... | - ip_step - IP address step. Type: string +| | ... | - src_mac_start - Source MAC address start in format with colons. +| | ... | Type: string +| | ... | - src_mac_step - Source MAC address step. Type: string +| | ... | - src_mac_mask - Source MAC address mask. 00:00:00:00:00:00 is a +| | ... | wildcard mask. Type: string +| | ... | - no_hit_aces_number - Number of not-hitting ACEs to be configured. +| | ... | Type: integer +| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect. +| | ... | Type: string +| | ... | - tg_stream1_subnet - IP subnet used by TG in direction 0->1. +| | ... | Type: string +| | ... | - tg_stream2_subnet - IP subnet used by TG in direction 1->0. +| | ... | Type: string +| | ... | - tg_stream1_mac - Source MAC address of traffic stream 1. +| | ... | Type: string +| | ... | - tg_stream2_mac - Source MAC address of traffic stream 2. +| | ... | Type: string +| | ... | - tg_mac_mask - MAC address mask for traffic streams. +| | ... | 00:00:00:00:00:00 is a wildcard mask. Type: string +| | ... +| | [Arguments] | ${dut} | ${dut_if1}=${NONE} | ${dut_if2}=${NONE} +| | ... +| | ${src_ip_int} = | IP To Int | ${src_ip_start} +| | ${src_ip_int} = | Evaluate | ${src_ip_int} - ${ip_step} +| | ... +| | ${ip_limit} = | Set Variable | 255.255.255.255 +| | ${ip_limit_int} = | IP To Int | ${ip_limit} +| | ... +| | ${src_mac_int} = | Mac To Int | ${src_mac_start} +| | ${src_mac_int} = | Evaluate | ${src_mac_int} - ${src_mac_step} +| | ... +| | ${mac_limit} = | Set Variable | ff:ff:ff:ff:ff:ff +| | ${mac_limit_int} = | Mac To Int | ${mac_limit} +| | ... +| | ${acl}= | Set Variable | ipv4 permit +| | :FOR | ${nr} | IN RANGE | 0 | ${no_hit_aces_number} +| | | ${src_ip_int} = | Evaluate | ${src_ip_int} + ${ip_step} +| | | ${src_mac_int} = | Evaluate | ${src_mac_int} + ${src_mac_step} +| | | ${ipv4_limit_reached}= | Set Variable If +| | | ... | ${src_ip_int} > ${ip_limit_int} | ${TRUE} +| | | ${mac_limit_reached}= | Set Variable If +| | | ... | ${src_mac_int} > ${mac_limit_int} | ${TRUE} +| | | Run Keyword If | '${ipv4_limit_reached}' == '${TRUE}' | Log +| | | ... | Can't do more iterations - IPv4 address limit has been reached. +| | | ... | WARN +| | | Run Keyword If | '${mac_limit_reached}' == '${TRUE}' | Log +| | | ... | Can't do more iterations - MAC address limit has been reached. +| | | ... | WARN +| | | ${src_ip} = | Run Keyword If | '${ipv4_limit_reached}' == '${TRUE}' +| | | ... | Set Variable | ${ip_limit} +| | | ... | ELSE | Int To IP | ${src_ip_int} +| | | ${src_mac}= | Run Keyword If | '${mac_limit_reached}' == '${TRUE}' +| | | ... | Set Variable | ${mac_limit} +| | | ... | ELSE | Int To Mac | ${src_mac_int} +| | | ${acl}= | Catenate | ${acl} | ip ${src_ip}/32 +| | | ... | mac ${src_mac} | mask ${src_mac_mask}, +| | | Exit For Loop If | '${ipv4_limit_reached}' == '${TRUE}' or '${mac_limit_reached}' == '${TRUE}' +| | ${acl0}= | Catenate | ${acl} +| | ... | ipv4 ${acl_action} ip ${tg_stream1_subnet} mac ${tg_stream1_mac} +| | ... | mask ${tg_mac_mask} +| | ${acl1}= | Catenate | ${acl} +| | ... | ipv4 ${acl_action} ip ${tg_stream2_subnet} mac ${tg_stream2_mac} +| | ... | mask ${tg_mac_mask} +| | Add Macip Acl Multi Entries | ${dut} | rules=${acl0} +| | Add Macip Acl Multi Entries | ${dut} | rules=${acl1} +| | ${acl_idx}= | Set Variable | 0 +| | Run Keyword Unless | '${dut_if1}' == '${NONE}' +| | ... | Add Del Macip Acl Interface | ${dut} | ${dut_if1} | add | ${acl_idx} +| | ${acl_idx}= | Set Variable | 1 +| | Run Keyword Unless | '${dut_if2}' == '${NONE}' +| | ... | Add Del Macip Acl Interface | ${dut} | ${dut_if2} | add | ${acl_idx} + +| Configure IPv4 ACLs +| | [Documentation] +| | ... | Configure ACL with required number of not-hitting permit ACEs plus two +| | ... | hitting ACEs for both traffic directions. +| | ... +| | ... | *Arguments:* +| | ... | - dut_node - DUT node. Type: dictionary +| | ... | - dut_if1 - DUT node interface1 name (Optional). Type: string +| | ... | - dut_if2 - DUT node interface2 name (Optional). Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Configure IPv4 ACLs \| ${nodes['DUT1']} \| GigabitEthernet0/7/0 \ +| | ... | \| GigabitEthernet0/8/0 \| +| | ... +| | ... | _NOTE:_ This KW uses following test case variables: +| | ... | - src_ip_start - Source IP address start. Type: string +| | ... | - dst_ip_start - Destination IP address start. Type: string +| | ... | - ip_step - IP address step. Type: string +| | ... | - sport_start - Source port number start. Type: string +| | ... | - dport_start - Destination port number start. Type: string +| | ... | - port_step - Port number step. Type: string +| | ... | - no_hit_aces_number - Number of not-hitting ACEs to be configured. +| | ... | Type: integer +| | ... | - acl_apply_type - To what path apply the ACL - input or output. +| | ... | Type: string +| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect. +| | ... | Type: string +| | ... | - trex_stream1_subnet - IP subnet used by T-Rex in direction 0->1. +| | ... | Type: string +| | ... | - trex_stream2_subnet - IP subnet used by T-Rex in direction 1->0. +| | ... | Type: string +| | ... +| | [Arguments] | ${dut} | ${dut_if1}=${NONE} | ${dut_if2}=${NONE} +| | ${src_ip_int} = | Evaluate +| | ... | int(ipaddress.ip_address(unicode($src_ip_start))) - $ip_step +| | ... | modules=ipaddress +| | ${dst_ip_int} = | Evaluate +| | ... | int(ipaddress.ip_address(unicode($dst_ip_start))) - $ip_step +| | ... | modules=ipaddress +| | ${ip_limit} = | Set Variable | 255.255.255.255 +| | ${ip_limit_int} = | Evaluate +| | ... | int(ipaddress.ip_address(unicode($ip_limit))) | modules=ipaddress +| | ${sport}= | Evaluate | $sport_start - $port_step +| | ${dport}= | Evaluate | $dport_start - $port_step +| | ${port_limit}= | Set Variable | ${65535} +| | ${acl}= | Set Variable | ipv4 permit +| | :FOR | ${nr} | IN RANGE | 0 | ${no_hit_aces_number} +| | | ${src_ip_int} = | Evaluate | $src_ip_int + $ip_step +| | | ${dst_ip_int} = | Evaluate | $dst_ip_int + $ip_step +| | | ${sport}= | Evaluate | $sport + $port_step +| | | ${dport}= | Evaluate | $dport + $port_step +| | | ${ipv4_limit_reached}= | Set Variable If +| | | ... | $src_ip_int > $ip_limit_int or $src_ip_int > $ip_limit_int +| | | ... | ${TRUE} +| | | ${udp_limit_reached}= | Set Variable If +| | | ... | $sport > $port_limit or $dport > $port_limit | ${TRUE} +| | | Run Keyword If | $ipv4_limit_reached is True | Log +| | | ... | Can't do more iterations - IPv4 address limit has been reached. +| | | ... | WARN +| | | Run Keyword If | $udp_limit_reached is True | Log +| | | ... | Can't do more iterations - UDP port limit has been reached. +| | | ... | WARN +| | | ${src_ip} = | Run Keyword If | $ipv4_limit_reached is True +| | | ... | Set Variable | ${ip_limit} +| | | ... | ELSE | Evaluate | str(ipaddress.ip_address($src_ip_int)) +| | | ... | modules=ipaddress +| | | ${dst_ip} = | Run Keyword If | $ipv4_limit_reached is True +| | | ... | Set Variable | ${ip_limit} +| | | ... | ELSE | Evaluate | str(ipaddress.ip_address($dst_ip_int)) +| | | ... | modules=ipaddress +| | | ${sport}= | Set Variable If | ${sport} > $port_limit | $port_limit +| | | ... | ${sport} +| | | ${dport}= | Set Variable If | ${dport} > $port_limit | $port_limit +| | | ... | ${dport} +| | | ${acl}= | Catenate | ${acl} | src ${src_ip}/32 dst ${dst_ip}/32 +| | | ... | sport ${sport} | dport ${dport}, +| | | Exit For Loop If +| | | ... | $ipv4_limit_reached is True or $udp_limit_reached is True +| | ${acl}= | Catenate | ${acl} +| | ... | ipv4 ${acl_action} src ${trex_stream1_subnet}, +| | ... | ipv4 ${acl_action} src ${trex_stream2_subnet} +| | Add Replace Acl Multi Entries | ${dut} | rules=${acl} +| | @{acl_list}= | Create List | ${0} +| | Run Keyword If | 'input' in $acl_apply_type and $dut_if1 is not None +| | ... | Set Acl List For Interface | ${dut} | ${dut_if1} | input | ${acl_list} +| | Run Keyword If | 'input' in $acl_apply_type and $dut_if2 is not None +| | ... | Set Acl List For Interface | ${dut} | ${dut_if2} | input | ${acl_list} +| | Run Keyword If | 'output' in $acl_apply_type and $dut_if1 is not None +| | ... | Set Acl List For Interface | ${dut} | ${dut_if1} | output +| | ... | ${acl_list} +| | Run Keyword If | 'output' in $acl_apply_type and $dut_if2 is not None +| | ... | Set Acl List For Interface | ${dut} | ${dut_if2} | output +| | ... | ${acl_list} + +| Configure ACLs on a single interface +| | [Documentation] +| | ... | Configure ACL +| | ... +| | ... | *Arguments:* +| | ... | - dut - DUT node. Type: string +| | ... | - dut_if - DUT node interface name. Type: string +| | ... | - acl_apply_type - To what path apply the ACL - input or output. +| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect. +| | ... | - subnets - Subnets to apply the specific ACL. Type: list +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Configure ACLs on a single interface \| ${nodes['DUT1']} +| | ... | \| ... \| GigabitEthernet0/7/0 \| input \| permit | 0.0.0.0/0 +| | ... +| | [Arguments] | ${dut} | ${dut_if} | ${acl_apply_type} | ${acl_action} +| | ... | @{subnets} +| | Set Test variable | ${acl} | ${EMPTY} +| | :FOR | ${subnet} | IN | @{subnets} +| | | ${acl} = | Run Keyword If | '${acl}' == '${EMPTY}' +| | | ... | Set Variable | ipv4 ${acl_action} src ${subnet} +| | | ... | ELSE +| | | ... | Catenate | SEPARATOR=", " | ${acl} +| | | ... | ipv4 ${acl_action} src ${subnet} +| | Add Replace Acl Multi Entries | ${dut} | rules=${acl} +| | @{acl_list} = | Create List | ${0} +| | Set Acl List For Interface | ${dut} | ${dut_if} | ${acl_apply_type} +| | ... | ${acl_list} + +| Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | [Documentation] +| | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node +| | ... | circular topology. Get the interface MAC addresses and setup ARP on +| | ... | all VPP interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG +| | ... | links. In case of 3-node topology setup IPv4 adresses with /30 prefix +| | ... | on DUT1-DUT2 link and set routing on both DUT nodes with prefix /24 +| | ... | and next hop of neighbour DUT interface IPv4 address. +| | ... | Apply required ACL rules to DUT1 interfaces. +| | ... +| | ... | *Arguments:* +| | ... | - ip_nr - Number of IPs to be used. Type: integer +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize IPv4 routing fwith IPv4 ACLs on DUT1 \ +| | ... | in 3-node circular topology \| +| | ... +| | [Arguments] | ${ip_nr}=${1} +| | ... +| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2} +| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2} +| | ... | ELSE | Set Variable | ${dut1} +| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2_if2} +| | ... | ELSE | Set Variable | ${dut1_if2} +| | ... +| | Set interfaces in path up +| | ... +| | :FOR | ${number} | IN RANGE | 2 | ${ip_nr}+2 +| | | VPP Add IP Neighbor +| | | ... | ${dut1} | ${dut1_if1} | 10.10.10.${number} | ${tg_if1_mac} +| | | VPP Add IP Neighbor +| | | ... | ${dut} | ${dut_if2} | 20.20.20.${number} | ${tg_if2_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add IP Neighbor +| | ... | ${dut2} | ${dut2_if1} | 1.1.1.1 | ${dut1_if2_mac} +| | ... +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if1} | 10.10.10.1 | 24 +| | VPP Interface Set IP Address +| | ... | ${dut} | ${dut_if2} | 20.20.20.1 | 24 +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if2} | 1.1.1.1 | 30 +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Interface Set IP Address +| | ... | ${dut2} | ${dut2_if1} | 1.1.1.2 | 30 +| | ... +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | gateway=1.1.1.2 +| | ... | interface=${dut1_if2} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | gateway=1.1.1.1 +| | ... | interface=${dut2_if1} +| | ... +| | Configure IPv4 ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2} diff --git a/resources/libraries/robot/features/gbp.robot b/resources/libraries/robot/features/gbp.robot index 6ebdad1532..8495475639 100644 --- a/resources/libraries/robot/features/gbp.robot +++ b/resources/libraries/robot/features/gbp.robot @@ -14,7 +14,7 @@ *** Settings *** | Library | resources.libraries.python.GBP | ... -| Documentation | GBP keywords +| Documentation | GBP keywords. *** Keywords *** | Initialize GBP routing domains on node diff --git a/resources/libraries/robot/ip/ip6.robot b/resources/libraries/robot/ip/ip6.robot index 9c50fb4812..c4ef0b7c1f 100644 --- a/resources/libraries/robot/ip/ip6.robot +++ b/resources/libraries/robot/ip/ip6.robot @@ -221,3 +221,89 @@ | | | ... | interface=${dut1-vhost-${number}-if1} | vrf=${fib_table_1} | | | Vpp Route Add | ${dut1} | 2001:1::0 | 64 | gateway=1:2::1 | | | ... | interface=${dut1-vhost-${number}-if2} | vrf=${fib_table_2} + +| Initialize IPv6 forwarding with VLAN dot1q sub-interfaces in circular topology +| | [Documentation] +| | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node +| | ... | circular topology. In case of 3-node topology create VLAN +| | ... | sub-interfaces between DUTs. In case of 2-node topology create VLAN +| | ... | sub-interface on dut1-if2 interface. Get the interface MAC addresses +| | ... | and setup ARPs. Setup IPv6 addresses with /64 prefix on DUT-TG links +| | ... | and set routing with prefix /64. In case of 3-node set IPv6 adresses +| | ... | with /64 prefix on VLAN and set routing on both DUT nodes with prefix +| | ... | /64. Set next hop of neighbour DUT interface IPv6 address. All +| | ... | interfaces are brought up. +| | ... +| | ... | *Arguments:* +| | ... | - tg_if1_net - TG interface 1 IPv6 subnet used by traffic generator. +| | ... | Type: integer +| | ... | - tg_if2_net - TG interface 2 IPv6 subnet used by traffic generator. +| | ... | Type: integer +| | ... | - subid - ID of the sub-interface to be created. Type: string +| | ... | - tag_rewrite - Method of tag rewrite. Type: string +| | ... +| | ... | _NOTE:_ This KW uses following test case variables: +| | ... | - dut1 - DUT1 node. +| | ... | - dut2 - DUT2 node. +| | ... | - dut1_if2 - DUT1 interface towards DUT2. +| | ... | - dut2_if1 - DUT2 interface towards DUT1. +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize IPv6 forwarding with VLAN dot1q sub-interfaces\ +| | ... | in circular topology \| 2001:1::0 \| 2001:2::0 \| 10 \| pop-1 \| +| | ... +| | [Arguments] | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite} +| | ... +| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2} +| | ... +| | Set interfaces in path up +| | ... +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Initialize VLAN dot1q sub-interfaces in circular topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology +| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure L2 tag rewrite method on interfaces | ${dut1} +| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite} +| | ... | ELSE | Configure L2 tag rewrite method on interfaces +| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite} +| | ... +| | ${prefix}= | Set Variable | 64 +| | ${host_prefix}= | Set Variable | 64 +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2002:1::1 | ${tg_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add Ip Neighbor +| | ... | ${dut1} | ${subif_index_1} | 2002:2::2 | ${dut2_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add Ip Neighbor +| | ... | ${dut2} | ${subif_index_2} | 2002:2::1 | ${dut1_if2_mac} +| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2} +| | ... | ELSE | Set Variable | ${dut1} +| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2_if2} +| | ... | ELSE | Set Variable | ${subif_index_1} +| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 2002:3::1 | ${tg_if2_mac} +| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 2002:1::2 | ${prefix} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Interface Set IP Address | ${dut1} | ${subif_index_1} | 2002:2::1 +| | ... | ${prefix} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Interface Set IP Address | ${dut2} | ${subif_index_2} | 2002:2::2 +| | ... | ${prefix} +| | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 2002:3::2 | ${prefix} +| | Vpp All Ra Suppress Link Layer | ${nodes} +| | Vpp Route Add | ${dut1} | ${tg_if1_net} | ${host_prefix} +| | ... | gateway=2002:1::1 | interface=${dut1_if1} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut1} | ${tg_if2_net} | ${host_prefix} +| | ... | gateway=2002:2::2 | interface=${subif_index_1} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut2} | ${tg_if1_net} | ${host_prefix} +| | ... | gateway=2002:2::1 | interface=${subif_index_2} +| | Vpp Route Add | ${dut} | ${tg_if2_net} | ${host_prefix} +| | ... | gateway=2002:3::1 | interface=${dut_if2} + diff --git a/resources/libraries/robot/ip/nat.robot b/resources/libraries/robot/ip/nat.robot index ff3d5bac08..bff8b27dbf 100644 --- a/resources/libraries/robot/ip/nat.robot +++ b/resources/libraries/robot/ip/nat.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2019 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,6 +13,7 @@ *** Settings *** | Library | resources.libraries.python.NATUtil +| ... | Documentation | Keywords for NAT feature in VPP. *** Keywords *** @@ -69,3 +70,58 @@ | | [Arguments] | ${node} | | ... | | Show NAT | ${node} + +| Initialize NAT44 in circular topology +| | [Documentation] | Initialization of 2-node / 3-node topology with NAT44 +| | ... | between DUTs: +| | ... | - set interfaces up +| | ... | - set IP addresses +| | ... | - set ARP +| | ... | - create routes +| | ... | - set NAT44 - only on DUT1 +| | ... +| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2} +| | ... +| | Set interfaces in path up +| | ... +| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 10.0.0.1 | 20 +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} +| | ... | 11.0.0.1 | 20 +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Interface Set IP Address | ${dut2} | ${dut2_if1} +| | ... | 11.0.0.2 | 20 +| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2} +| | ... | ELSE | Set Variable | ${dut1} +| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2_if2} +| | ... | ELSE | Set Variable | ${dut1_if2} +| | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 12.0.0.1 | 20 +| | ... +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.0.0.2 | ${tg_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | 11.0.0.2 | ${dut2_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add IP Neighbor +| | ... | ${dut2} | ${dut2_if1} | 11.0.0.1 | ${dut1_if2_mac} +| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 12.0.0.2 | ${tg_if2_mac} +| | ... +| | Vpp Route Add | ${dut1} | 20.0.0.0 | 18 | gateway=10.0.0.2 +| | ... | interface=${dut1_if1} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut1} | 12.0.0.2 | 32 | gateway=11.0.0.2 +| | ... | interface=${dut1_if2} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut2} | 12.0.0.0 | 24 | gateway=12.0.0.2 +| | ... | interface=${dut2_if2} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut2} | 200.0.0.0 | 30 | gateway=11.0.0.1 +| | ... | interface=${dut2_if1} +| | ... +| | Configure inside and outside interfaces +| | ... | ${dut1} | ${dut1_if1} | ${dut1_if2} +| | Configure deterministic mode for NAT44 +| | ... | ${dut1} | 20.0.0.0 | 18 | 200.0.0.0 | 30 diff --git a/resources/libraries/robot/l2/l2_bridge_domain.robot b/resources/libraries/robot/l2/l2_bridge_domain.robot index 6a3a466cdb..a40f9c9c59 100644 --- a/resources/libraries/robot/l2/l2_bridge_domain.robot +++ b/resources/libraries/robot/l2/l2_bridge_domain.robot @@ -67,32 +67,6 @@ | | Set Interface State | ${dut_node} | ${dut_if} | up | | Add Interface To L2 BD | ${dut_node} | ${dut_if} | ${bd_id} | ${shg} -| Add destination port to L2FIB -| | [Documentation] -| | ... | Create a static L2FIB entry for required destination port -| | ... | on defined interface and bridge domain ID of the given VPP node. -| | ... -| | ... | *Arguments:* -| | ... | - ${dest_node} - Destination node. Type: dictionary -| | ... | - ${dest_node_if} - Destination node interface name. Type: string -| | ... | - ${vpp_node} - DUT node to add L2FIB entry on. Type: dictionary -| | ... | - ${vpp_node_if} - DUT node interface name. Type: string -| | ... | - ${bd_id} - Bridge domain ID. Type: integer -| | ... -| | ... | *Return:* -| | ... | - No value returned -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Add destination port to L2FIB \| ${nodes['TG']} \ -| | ... | \| eth1 \| ${nodes['DUT2']} \| GigabitEthernet0/8/0 \| 3 \| -| | ... -| | [Arguments] | ${node} | ${dest_node_if} | ${vpp_node} -| | ... | ${vpp_node_if} | ${bd_id} -| | ... -| | ${mac}= | Get Interface Mac | ${node} | ${dest_node_if} -| | Vpp Add L2fib Entry | ${vpp_node} | ${mac} | ${vpp_node_if} | ${bd_id} - | Initialize L2 bridge domain on node | | [Documentation] | | ... | Setup L2 bridge domain topology by adding two interfaces on DUT into diff --git a/resources/libraries/robot/l2/tagging.robot b/resources/libraries/robot/l2/tagging.robot index 67703d9ea0..a48e10c427 100644 --- a/resources/libraries/robot/l2/tagging.robot +++ b/resources/libraries/robot/l2/tagging.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2019 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -12,15 +12,13 @@ # limitations under the License. *** Settings *** -| Documentation | Keywords for VLAN tests -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/l2/l2_xconnect.robot | Library | resources.libraries.python.L2Util | Library | resources.libraries.python.InterfaceUtil | Library | resources.libraries.python.NodePath +| ... +| Documentation | Keywords for VLAN tests *** Keywords *** - | Initialize VLAN sub-interfaces in 3-node circular topology | | [Arguments] | ${DUT1} | ${INT1} | ${DUT2} | ${INT2} | ${SUB_ID} | | ... | ${OUTER_VLAN_ID} | ${INNER_VLAN_ID} | ${TYPE_SUBIF} @@ -120,88 +118,6 @@ | | Run Keyword Unless | ${DUT2} == ${None} | | ... | L2 Vlan tag rewrite | ${DUT2} | ${SUB_INT2} | ${TAG_REWRITE_METHOD} -| Connect interfaces and VLAN sub-interfaces using L2XC -| | [Arguments] | ${DUT1} | ${INT1} | ${SUB_INT1} | ${DUT2}=${None} -| | ... | ${INT2}=${None} | ${SUB_INT2}=${None} -| | [Documentation] | Add interface and subinterface to bidirectional -| | ... | L2-xconnect on DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - DUT1 - Node to add bidirectional cross-connect. -| | ... | - INT1 - Interface to add to the cross-connect. -| | ... | - SUB_INT1 - Sub-interface to add to the cross-connect. -| | ... | - DUT2 - Node to add bidirectional cross-connect. -| | ... | - INT2 - Interface to add to the cross-connect. -| | ... | - SUB_INT2 - Sub-interface to add to the cross-connect. -| | ... -| | Configure L2XC | ${DUT1} | ${INT1} | ${SUB_INT1} -| | Run Keyword Unless | ${DUT2} == ${None} -| | ... | Configure L2XC | ${DUT2} | ${INT2} | ${SUB_INT2} - -| Create vlan sub-interface -| | [Documentation] | Create VLAN sub-interface on DUT and set admin status up. -| | ... -| | ... | *Arguments:* -| | ... | - dut_node - Node to add VLAN sub-intreface. Type: dictionary -| | ... | - interface - Interface to create VLAN sub-interface. Type: string -| | ... | - vlan_id - VLAN ID. Type: integer -| | ... -| | ... | *Return:* -| | ... | - vlan_name - VLAN sub-interface name. Type: string -| | ... | - vlan_index - VLAN sub-interface SW index. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create vlan sub-interface \| ${nodes['DUT1']} \| port3 \| 100 \| -| | ... -| | [Arguments] | ${dut_node} | ${interface} | ${vlan_id} -| | ... -| | [Return] | ${vlan_name} | ${vlan_index} -| | ... -| | Set Interface State | ${dut_node} | ${interface} | up -| | ${interface_name}= | Get interface name | ${dut_node} | ${interface} -| | ${vlan_name} | ${vlan_index}= | Create Vlan Subinterface -| | ... | ${dut_node} | ${interface_name} | ${vlan_id} -| | Set Interface State | ${dut_node} | ${vlan_index} | up - -| Create tagged sub-interface -| | [Documentation] | Create tagged sub-interface on DUT. Type of tagged \ -| | ... | sub-intreface depends on type_subif value: -| | ... | - one_tag -> VLAN -| | ... | - two_tags -> QinQ VLAN -| | ... | - two_tags dot1ad - DOT1AD -| | ... -| | ... | *Arguments:* -| | ... | - dut_node - Node to add VLAN sub-intreface. Type: dictionary -| | ... | - interface - Interface to create tagged sub-interface. Type: string -| | ... | - subif_id - Sub-interface ID. Type: integer -| | ... | - outer_vlan_id - VLAN (outer) ID (Optional). Type: integer -| | ... | - inner_vlan_id - VLAN inner ID (Optional). Type: integer -| | ... | - type_subif - Sub-interface type (Optional). Type: string -| | ... -| | ... | *Return:* -| | ... | - subif_name - Sub-interface name. Type: string -| | ... | - subif_index - Sub-interface SW index. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create tagged sub-interface \| ${nodes['DUT1']} \| port1 \| 10 \ -| | ... | \| outer_vlan_id=100 \| inner_vlan_id=200 \ -| | ... | \| type_subif=two_tags dot1ad \| -| | ... -| | [Arguments] | ${dut_node} | ${interface} | ${subif_id} -| | ... | ${outer_vlan_id}=${None} | ${inner_vlan_id}=${None} -| | ... | ${type_subif}=${None} -| | ... -| | [Return] | ${subif_name} | ${subif_index} -| | ... -| | Set Interface State | ${dut_node} | ${interface} | up -| | ${interface_name}= | Get interface name | ${dut_node} | ${interface} -| | ${subif_name} | ${subif_index}= | Create Subinterface -| | ... | ${dut_node} | ${interface_name} | ${subif_id} -| | ... | outer_vlan_id=${outer_vlan_id} | inner_vlan_id=${inner_vlan_id} -| | ... | type_subif=${type_subif} - | Configure L2 tag rewrite method on interface | | [Documentation] | Set L2 tag rewrite on (sub-)interface on DUT | | ... diff --git a/resources/libraries/robot/overlay/gre.robot b/resources/libraries/robot/overlay/gre.robot deleted file mode 100644 index fd38a1764a..0000000000 --- a/resources/libraries/robot/overlay/gre.robot +++ /dev/null @@ -1,43 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/interfaces.robot - -*** Keywords *** -| Create GRE tunnel interface and set it up -| | [Documentation] | Create GRE tunnel interface and set it up on defined VPP node and put \ -| | ... | the interface to UP state. -| | ... -| | ... | *Arguments:* -| | ... | - dut_node - DUT node where to create GRE tunnel. Type: dictionary -| | ... | - source_ip_address - GRE tunnel source IP address. Type: string -| | ... | - destination_ip_address - GRE tunnel destination IP address. -| | ... | Type: string -| | ... -| | ... | *Return:* -| | ... | - name - Name of created GRE tunnel interface. Type: string -| | ... | - index - SW interface index of created GRE tunnel interface. -| | ... | Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| ${gre_name} \| ${gre_index}= \ -| | ... | \| Create GRE tunnel interface and set it up \| ${dut} \ -| | ... | \| 192.0.1.1 \| 192.0.1.2 \| -| | ... -| | [Arguments] | ${dut_node} | ${source_ip_address} | ${destination_ip_address} -| | ${name} | ${index}= | Create GRE tunnel interface -| | ... | ${dut_node} | ${source_ip_address} | ${destination_ip_address} -| | Set Interface State | ${dut_node} | ${index} | up -| | [Return] | ${name} | ${index} diff --git a/resources/libraries/robot/overlay/srv6.robot b/resources/libraries/robot/overlay/srv6.robot index a0a557e6d9..1be008a44a 100644 --- a/resources/libraries/robot/overlay/srv6.robot +++ b/resources/libraries/robot/overlay/srv6.robot @@ -282,3 +282,198 @@ | | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | Show SR LocalSIDs | ${nodes['${dut}']} + +| Initialize IPv6 forwarding over SRv6 with encapsulation with '${n}' x SID '${prepos}' decapsulation in 3-node circular topology +| | [Documentation] +| | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular +| | ... | topology. Get the interface MAC addresses and setup neighbours on all +| | ... | VPP interfaces. Setup IPv6 addresses on all interfaces. Set segment +| | ... | routing for IPv6 for required number of SIDs and configure IPv6 routes +| | ... | on both DUT nodes. +| | ... +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if1} | ${dut1_if1_ip6} | ${prefix} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if2} | ${dut1_if2_ip6} | ${prefix} +| | VPP Interface Set IP Address +| | ... | ${dut2} | ${dut2_if1} | ${dut2_if1_ip6} | ${prefix} +| | VPP Interface Set IP Address +| | ... | ${dut2} | ${dut2_if2} | ${dut2_if2_ip6} | ${prefix} +| | Vpp All Ra Suppress Link Layer | ${nodes} +| | :FOR | ${number} | IN RANGE | 2 | ${dst_addr_nr}+2 +| | | ${hexa_nr}= | Convert To Hex | ${number} +| | | VPP Add IP Neighbor | ${dut1} +| | | ... | ${dut1_if1} | ${tg_if1_ip6_subnet}${hexa_nr} | ${tg_if1_mac} +| | | VPP Add IP Neighbor | ${dut2} +| | | ... | ${dut2_if2} | ${tg_if2_ip6_subnet}${hexa_nr} | ${tg_if2_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${dut2_if1_ip6} | ${dut2_if1_mac} +| | VPP Add IP Neighbor +| | ... | ${dut2} | ${dut2_if1} | ${dut1_if2_ip6} | ${dut1_if2_mac} +| | ${sid1}= | Set Variable If +| | ... | "${n}" == "1" | ${dut2_sid1} +| | ... | "${n}" == "2" | ${dut2_sid1_1} +| | ${sid2}= | Set Variable If +| | ... | "${n}" == "1" | ${dut1_sid2} +| | ... | "${n}" == "2" | ${dut1_sid2_1} +| | Vpp Route Add | ${dut1} | ${sid1} | ${sid_prefix} | gateway=${dut2_if1_ip6} +| | ... | interface=${dut1_if2} +| | Vpp Route Add | ${dut2} | ${sid2} | ${sid_prefix} | gateway=${dut1_if2_ip6} +| | ... | interface=${dut2_if1} +# Configure SRv6 for direction0 +| | Set SR Encaps Source Address on DUT | ${dut1} | ${dut1_sid1} +| | @{sid_list_dir0}= | Run Keyword If | "${n}" == "1" +| | ... | Create List | ${dut2_sid1} +| | ... | ELSE IF | "${n}" == "2" +| | ... | Create List | ${dut2_sid1_1} | ${dut2_sid1_2} +| | Configure SR Policy on DUT | ${dut1} | ${dut1_bsid} | encap +| | ... | @{sid_list_dir0} +| | Configure SR Steer on DUT | ${dut1} | L3 | ${dut1_bsid} +| | ... | ip_addr=${tg_if2_ip6_subnet} | prefix=${sid_prefix} +| | Run Keyword If | "${n}" == "1" +| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.dx6 +| | ... | interface=${dut2_if2} | next_hop=${tg_if2_ip6_subnet}2 +| | Run Keyword If | "${n}" == "2" +| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1_1} | end +| | Run Keyword If | "${n}" == "2" and "${prepos}" != "without" +| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1_2} | end.dx6 +| | ... | interface=${dut2_if2} | next_hop=${tg_if2_ip6_subnet}2 +| | Run Keyword If | "${n}" == "2" and "${prepos}" == "without" +| | ... | Vpp Route Add | ${dut2} | ${dut2_sid1_2} | ${sid_prefix} +| | ... | gateway=${tg_if2_ip6_subnet}2 | interface=${dut2_if2} +# Configure SRv6 for direction1 +| | Set SR Encaps Source Address on DUT | ${dut2} | ${dut2_sid2} +| | @{sid_list_dir1}= | Run Keyword If | "${n}" == "1" +| | ... | Create List | ${dut1_sid2} +| | ... | ELSE IF | "${n}" == "2" +| | ... | Create List | ${dut1_sid2_1} | ${dut1_sid2_2} +| | Configure SR Policy on DUT | ${dut2} | ${dut2_bsid} | encap +| | ... | @{sid_list_dir1} +| | Configure SR Steer on DUT | ${dut2} | L3 | ${dut2_bsid} +| | ... | ip_addr=${tg_if1_ip6_subnet} | prefix=${sid_prefix} +| | Run Keyword If | "${n}" == "1" +| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.dx6 +| | ... | interface=${dut1_if1} | next_hop=${tg_if1_ip6_subnet}2 +| | Run Keyword If | "${n}" == "2" +| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2_1} | end +| | Run Keyword If | "${n}" == "2" and "${prepos}" != "without" +| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2_2} | end.dx6 +| | ... | interface=${dut1_if1} | next_hop=${tg_if1_ip6_subnet}2 +| | Run Keyword If | "${n}" == "2" and "${prepos}" == "without" +| | ... | Vpp Route Add | ${dut1} | ${dut1_sid2_2} | ${sid_prefix} +| | ... | gateway=${tg_if1_ip6_subnet}2 | interface=${dut1_if1} +| | Set interfaces in path up + +| Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via '${behavior}' behaviour in 3-node circular topology +| | [Documentation] +| | ... | Create pair of Memif interfaces on all defined VPP nodes. Set UP +| | ... | state on VPP interfaces in path on nodes in 3-node circular topology. +| | ... | Get the interface MAC addresses and setup neighbours on all VPP +| | ... | interfaces. Setup IPv6 addresses on all interfaces. Set segment +| | ... | routing for IPv6 with defined behaviour function and configure IPv6 +| | ... | routes on both DUT nodes. +| | ... +| | ... | *Note:* +| | ... | KW uses test variable rxq_count_int set by KW Add worker threads +| | ... | and rxqueues to all DUTs +| | ... +| | ${sock1}= | Set Variable | memif-DUT1_CNF +| | ${sock2}= | Set Variable | memif-DUT2_CNF +| | Set up memif interfaces on DUT node | ${dut1} | ${sock1} | ${sock1} +| | ... | ${1} | dut1-memif-1-if1 | dut1-memif-1-if2 | ${rxq_count_int} +| | ... | ${rxq_count_int} +| | VPP Set interface MTU | ${dut1} | ${dut1-memif-1-if1} +| | VPP Set interface MTU | ${dut1} | ${dut1-memif-1-if2} +| | Set up memif interfaces on DUT node | ${dut2} | ${sock2} | ${sock2} +| | ... | ${1} | dut2-memif-1-if1 | dut2-memif-1-if2 | ${rxq_count_int} +| | ... | ${rxq_count_int} +| | VPP Set interface MTU | ${dut2} | ${dut2-memif-1-if1} +| | VPP Set interface MTU | ${dut2} | ${dut2-memif-1-if2} +| | :FOR | ${dut} | IN | @{duts} +| | | Show Memif | ${nodes['${dut}']} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if1} | ${dut1_if1_ip6} | ${prefix} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if2} | ${dut1_if2_ip6} | ${prefix} +| | VPP Interface Set IP Address | ${dut1} | ${dut1-memif-1-if1} +| | ... | ${dut1-memif-1-if1_ip6} | ${mem_prefix} +| | VPP Interface Set IP Address | ${dut1} | ${dut1-memif-1-if2} +| | ... | ${dut1-memif-1-if2_ip6} | ${mem_prefix} +| | VPP Interface Set IP Address +| | ... | ${dut2} | ${dut2_if1} | ${dut2_if1_ip6} | ${prefix} +| | VPP Interface Set IP Address +| | ... | ${dut2} | ${dut2_if2} | ${dut2_if2_ip6} | ${prefix} +| | VPP Interface Set IP Address | ${dut2} | ${dut2-memif-1-if1} +| | ... | ${dut2-memif-1-if1_ip6} | ${mem_prefix} +| | VPP Interface Set IP Address | ${dut2} | ${dut2-memif-1-if2} +| | ... | ${dut2-memif-1-if2_ip6} | ${mem_prefix} +| | Vpp All Ra Suppress Link Layer | ${nodes} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${dut2_if1_ip6} | ${dut2_if1_mac} +| | VPP Add IP Neighbor +| | ... | ${dut2} | ${dut2_if1} | ${dut1_if2_ip6} | ${dut1_if2_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if1} | ${tg_if1_ip6_subnet}2 | ${tg_if1_mac} +| | VPP Add IP Neighbor +| | ... | ${dut2} | ${dut2_if2} | ${tg_if2_ip6_subnet}2 | ${tg_if2_mac} +| | ${dut1-memif-1-if2_mac}= | Get Interface MAC | ${dut1} | memif2 +| | ${dut2-memif-1-if2_mac}= | Get Interface MAC | ${dut2} | memif2 +| | VPP Add IP Neighbor | ${dut1} +| | ... | ${dut1-memif-1-if1} | ${dut1_nh} | ${dut1-memif-1-if2_mac} +| | VPP Add IP Neighbor | ${dut2} +| | ... | ${dut2-memif-1-if1} | ${dut2_nh} | ${dut2-memif-1-if2_mac} +| | Vpp Route Add | ${dut1} | ${dut2_sid1} | ${sid_prefix} +| | ... | gateway=${dut2_if1_ip6} | interface=${dut1_if2} +| | Vpp Route Add | ${dut1} | ${out_sid2_1} | ${sid_prefix} +| | ... | gateway=${tg_if1_ip6_subnet}2 | interface=${dut1_if1} +| | Vpp Route Add | ${dut2} | ${dut1_sid2} | ${sid_prefix} +| | ... | gateway=${dut1_if2_ip6} | interface=${dut2_if1} +| | Vpp Route Add | ${dut2} | ${out_sid1_1} | ${sid_prefix} +| | ... | gateway=${tg_if2_ip6_subnet}2 | interface=${dut2_if2} +# Configure SRv6 for direction0 on DUT1 +| | Set SR Encaps Source Address on DUT | ${dut1} | ${dut1_sid1} +| | @{sid_list_dir0}= | Create List | ${dut2_sid1} | ${out_sid1_1} +| | ... | ${out_sid1_2} +| | Configure SR Policy on DUT | ${dut1} | ${dut1_bsid} | encap +| | ... | @{sid_list_dir0} +| | Configure SR Steer on DUT | ${dut1} | L3 | ${dut1_bsid} +| | ... | ip_addr=${tg_if2_ip6_subnet} | prefix=${sid_prefix} +# Configure SRv6 for direction1 on DUT2 +| | Set SR Encaps Source Address on DUT | ${dut2} | ${dut2_sid2} +| | @{sid_list_dir1}= | Create List | ${dut1_sid2} | ${out_sid2_1} +| | ... | ${out_sid2_2} +| | Configure SR Policy on DUT | ${dut2} | ${dut2_bsid} | encap +| | ... | @{sid_list_dir1} +| | Configure SR Steer on DUT | ${dut2} | L3 | ${dut2_bsid} +| | ... | ip_addr=${tg_if1_ip6_subnet} | prefix=${sid_prefix} +# Configure SRv6 for direction0 on DUT2 +| | ${dut2_out_if}= | Get Interface Name | ${dut2} | memif1 +| | ${dut2_in_if}= | Get Interface Name | ${dut2} | memif2 +| | Remove Values From List | ${sid_list_dir0} | ${dut2_sid1} +| | Run Keyword If | "${behavior}" == "static_proxy" +| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.as +| | ... | ${NONE} | ${dut2_nh} | ${NONE} | ${dut2_out_if} | ${dut2_in_if} +| | ... | ${dut1_sid1} | @{sid_list_dir0} +| | ... | ELSE IF | "${behavior}" == "dynamic_proxy" +| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.ad +| | ... | next_hop=${dut2_nh} | out_if=${dut2_out_if} | in_if=${dut2_in_if} +| | ... | ELSE IF | "${behavior}" == "masquerading" +| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.am +| | ... | next_hop=${dut2_nh} | out_if=${dut2_out_if} | in_if=${dut2_in_if} +| | ... | ELSE | Fail | Unsupported behaviour: ${behavior} +# Configure SRv6 for direction1 on DUT1 +| | ${dut1_out_if}= | Get Interface Name | ${dut1} | memif1 +| | ${dut1_in_if}= | Get Interface Name | ${dut1} | memif2 +| | Remove Values From List | ${sid_list_dir1} | ${dut1_sid2} +| | Run Keyword If | "${behavior}" == "static_proxy" +| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.as +| | ... | ${NONE} | ${dut1_nh} | ${NONE} | ${dut1_out_if} | ${dut1_in_if} +| | ... | ${dut2_sid2} | @{sid_list_dir1} +| | ... | ELSE IF | "${behavior}" == "dynamic_proxy" +| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.ad +| | ... | next_hop=${dut1_nh} | out_if=${dut1_out_if} | in_if=${dut1_in_if} +| | ... | ELSE IF | "${behavior}" == "masquerading" +| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.am +| | ... | next_hop=${dut1_nh} | out_if=${dut1_out_if} | in_if=${dut1_in_if} +| | ... | ELSE | Fail | Unsupported behaviour: ${behavior} +| | Set interfaces in path up diff --git a/resources/libraries/robot/overlay/vxlan.robot b/resources/libraries/robot/overlay/vxlan.robot index 42c1eba096..f03abdc11a 100644 --- a/resources/libraries/robot/overlay/vxlan.robot +++ b/resources/libraries/robot/overlay/vxlan.robot @@ -12,19 +12,9 @@ # limitations under the License. *** Settings *** -| Library | Collections | Library | resources.libraries.python.InterfaceUtil -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.IPv6Util -| Library | resources.libraries.python.L2Util -| Library | resources.libraries.python.NodePath | ... -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -| Resource | resources/libraries/robot/l2/l2_xconnect.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| ... -| Documentation | VXLAN keywords +| Documentation | VXLAN keywords. *** Keywords *** | Get VXLAN dump diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index 09382d736e..7c7c7bbceb 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -12,578 +12,9 @@ # limitations under the License. *** Settings *** -| Library | resources.libraries.python.DpdkUtil -| Library | resources.libraries.python.InterfaceUtil -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.TestConfig -| Library | resources.libraries.python.TrafficGenerator -| Library | resources.libraries.python.TrafficGenerator.TGDropRateSearchImpl -| Library | resources.libraries.python.VhostUser -| ... | Documentation | Performance suite keywords - configuration *** Keywords *** -| Initialize IPSec in 3-node circular topology -| | [Documentation] -| | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular -| | ... | topology. Get the interface MAC addresses and setup ARP on all VPP -| | ... | interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG and -| | ... | DUT1-DUT2 links. Set routing for encrypted traffic on both DUT nodes -| | ... | with prefix /8 and next hop of neighbour DUT or TG interface IPv4 -| | ... | address. -| | ... -| | Set interfaces in path up -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} -| | ... | ${dut1_if1_ip4} | 24 -| | VPP Interface Set IP Address | ${dut2} | ${dut2_if2} -| | ... | ${dut2_if2_ip4} | 24 -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | ${tg_if1_ip4} | ${tg_if1_mac} -| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | ${tg_if2_ip4} | ${tg_if2_mac} -| | Vpp Route Add | ${dut1} | ${laddr_ip4} | 8 | gateway=${tg_if1_ip4} -| | ... | interface=${dut1_if1} -| | Vpp Route Add | ${dut2} | ${raddr_ip4} | 8 | gateway=${tg_if2_ip4} -| | ... | interface=${dut2_if2} - -| Initialize IPv6 forwarding with VLAN dot1q sub-interfaces in circular topology -| | [Documentation] -| | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node -| | ... | circular topology. In case of 3-node topology create VLAN -| | ... | sub-interfaces between DUTs. In case of 2-node topology create VLAN -| | ... | sub-interface on dut1-if2 interface. Get the interface MAC addresses -| | ... | and setup ARPs. Setup IPv6 addresses with /64 prefix on DUT-TG links -| | ... | and set routing with prefix /64. In case of 3-node set IPv6 adresses -| | ... | with /64 prefix on VLAN and set routing on both DUT nodes with prefix -| | ... | /64. Set next hop of neighbour DUT interface IPv6 address. All -| | ... | interfaces are brought up. -| | ... -| | ... | *Arguments:* -| | ... | - tg_if1_net - TG interface 1 IPv6 subnet used by traffic generator. -| | ... | Type: integer -| | ... | - tg_if2_net - TG interface 2 IPv6 subnet used by traffic generator. -| | ... | Type: integer -| | ... | - subid - ID of the sub-interface to be created. Type: string -| | ... | - tag_rewrite - Method of tag rewrite. Type: string -| | ... -| | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - dut1 - DUT1 node. -| | ... | - dut2 - DUT2 node. -| | ... | - dut1_if2 - DUT1 interface towards DUT2. -| | ... | - dut2_if1 - DUT2 interface towards DUT1. -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize IPv6 forwarding with VLAN dot1q sub-interfaces\ -| | ... | in circular topology \| 2001:1::0 \| 2001:2::0 \| 10 \| pop-1 \| -| | ... -| | [Arguments] | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite} -| | ... -| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut2} -| | ... -| | Set interfaces in path up -| | ... -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} -| | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Configure L2 tag rewrite method on interfaces | ${dut1} -| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite} -| | ... | ELSE | Configure L2 tag rewrite method on interfaces -| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite} -| | ... -| | ${prefix}= | Set Variable | 64 -| | ${host_prefix}= | Set Variable | 64 -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2002:1::1 | ${tg_if1_mac} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Add Ip Neighbor -| | ... | ${dut1} | ${subif_index_1} | 2002:2::2 | ${dut2_if1_mac} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Add Ip Neighbor -| | ... | ${dut2} | ${subif_index_2} | 2002:2::1 | ${dut1_if2_mac} -| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | ${dut2} -| | ... | ELSE | Set Variable | ${dut1} -| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | ${dut2_if2} -| | ... | ELSE | Set Variable | ${subif_index_1} -| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 2002:3::1 | ${tg_if2_mac} -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 2002:1::2 | ${prefix} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Interface Set IP Address | ${dut1} | ${subif_index_1} | 2002:2::1 -| | ... | ${prefix} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Interface Set IP Address | ${dut2} | ${subif_index_2} | 2002:2::2 -| | ... | ${prefix} -| | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 2002:3::2 | ${prefix} -| | Vpp All Ra Suppress Link Layer | ${nodes} -| | Vpp Route Add | ${dut1} | ${tg_if1_net} | ${host_prefix} -| | ... | gateway=2002:1::1 | interface=${dut1_if1} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut1} | ${tg_if2_net} | ${host_prefix} -| | ... | gateway=2002:2::2 | interface=${subif_index_1} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut2} | ${tg_if1_net} | ${host_prefix} -| | ... | gateway=2002:2::1 | interface=${subif_index_2} -| | Vpp Route Add | ${dut} | ${tg_if2_net} | ${host_prefix} -| | ... | gateway=2002:3::1 | interface=${dut_if2} - -| Initialize IPv6 forwarding over SRv6 with encapsulation with '${n}' x SID '${prepos}' decapsulation in 3-node circular topology -| | [Documentation] -| | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular -| | ... | topology. Get the interface MAC addresses and setup neighbours on all -| | ... | VPP interfaces. Setup IPv6 addresses on all interfaces. Set segment -| | ... | routing for IPv6 for required number of SIDs and configure IPv6 routes -| | ... | on both DUT nodes. -| | ... -| | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if1} | ${dut1_if1_ip6} | ${prefix} -| | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if2} | ${dut1_if2_ip6} | ${prefix} -| | VPP Interface Set IP Address -| | ... | ${dut2} | ${dut2_if1} | ${dut2_if1_ip6} | ${prefix} -| | VPP Interface Set IP Address -| | ... | ${dut2} | ${dut2_if2} | ${dut2_if2_ip6} | ${prefix} -| | Vpp All Ra Suppress Link Layer | ${nodes} -| | :FOR | ${number} | IN RANGE | 2 | ${dst_addr_nr}+2 -| | | ${hexa_nr}= | Convert To Hex | ${number} -| | | VPP Add IP Neighbor | ${dut1} -| | | ... | ${dut1_if1} | ${tg_if1_ip6_subnet}${hexa_nr} | ${tg_if1_mac} -| | | VPP Add IP Neighbor | ${dut2} -| | | ... | ${dut2_if2} | ${tg_if2_ip6_subnet}${hexa_nr} | ${tg_if2_mac} -| | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if2} | ${dut2_if1_ip6} | ${dut2_if1_mac} -| | VPP Add IP Neighbor -| | ... | ${dut2} | ${dut2_if1} | ${dut1_if2_ip6} | ${dut1_if2_mac} -| | ${sid1}= | Set Variable If -| | ... | "${n}" == "1" | ${dut2_sid1} -| | ... | "${n}" == "2" | ${dut2_sid1_1} -| | ${sid2}= | Set Variable If -| | ... | "${n}" == "1" | ${dut1_sid2} -| | ... | "${n}" == "2" | ${dut1_sid2_1} -| | Vpp Route Add | ${dut1} | ${sid1} | ${sid_prefix} | gateway=${dut2_if1_ip6} -| | ... | interface=${dut1_if2} -| | Vpp Route Add | ${dut2} | ${sid2} | ${sid_prefix} | gateway=${dut1_if2_ip6} -| | ... | interface=${dut2_if1} -# Configure SRv6 for direction0 -| | Set SR Encaps Source Address on DUT | ${dut1} | ${dut1_sid1} -| | @{sid_list_dir0}= | Run Keyword If | "${n}" == "1" -| | ... | Create List | ${dut2_sid1} -| | ... | ELSE IF | "${n}" == "2" -| | ... | Create List | ${dut2_sid1_1} | ${dut2_sid1_2} -| | Configure SR Policy on DUT | ${dut1} | ${dut1_bsid} | encap -| | ... | @{sid_list_dir0} -| | Configure SR Steer on DUT | ${dut1} | L3 | ${dut1_bsid} -| | ... | ip_addr=${tg_if2_ip6_subnet} | prefix=${sid_prefix} -| | Run Keyword If | "${n}" == "1" -| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.dx6 -| | ... | interface=${dut2_if2} | next_hop=${tg_if2_ip6_subnet}2 -| | Run Keyword If | "${n}" == "2" -| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1_1} | end -| | Run Keyword If | "${n}" == "2" and "${prepos}" != "without" -| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1_2} | end.dx6 -| | ... | interface=${dut2_if2} | next_hop=${tg_if2_ip6_subnet}2 -| | Run Keyword If | "${n}" == "2" and "${prepos}" == "without" -| | ... | Vpp Route Add | ${dut2} | ${dut2_sid1_2} | ${sid_prefix} -| | ... | gateway=${tg_if2_ip6_subnet}2 | interface=${dut2_if2} -# Configure SRv6 for direction1 -| | Set SR Encaps Source Address on DUT | ${dut2} | ${dut2_sid2} -| | @{sid_list_dir1}= | Run Keyword If | "${n}" == "1" -| | ... | Create List | ${dut1_sid2} -| | ... | ELSE IF | "${n}" == "2" -| | ... | Create List | ${dut1_sid2_1} | ${dut1_sid2_2} -| | Configure SR Policy on DUT | ${dut2} | ${dut2_bsid} | encap -| | ... | @{sid_list_dir1} -| | Configure SR Steer on DUT | ${dut2} | L3 | ${dut2_bsid} -| | ... | ip_addr=${tg_if1_ip6_subnet} | prefix=${sid_prefix} -| | Run Keyword If | "${n}" == "1" -| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.dx6 -| | ... | interface=${dut1_if1} | next_hop=${tg_if1_ip6_subnet}2 -| | Run Keyword If | "${n}" == "2" -| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2_1} | end -| | Run Keyword If | "${n}" == "2" and "${prepos}" != "without" -| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2_2} | end.dx6 -| | ... | interface=${dut1_if1} | next_hop=${tg_if1_ip6_subnet}2 -| | Run Keyword If | "${n}" == "2" and "${prepos}" == "without" -| | ... | Vpp Route Add | ${dut1} | ${dut1_sid2_2} | ${sid_prefix} -| | ... | gateway=${tg_if1_ip6_subnet}2 | interface=${dut1_if1} -| | Set interfaces in path up - -| Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via '${behavior}' behaviour in 3-node circular topology -| | [Documentation] -| | ... | Create pair of Memif interfaces on all defined VPP nodes. Set UP -| | ... | state on VPP interfaces in path on nodes in 3-node circular topology. -| | ... | Get the interface MAC addresses and setup neighbours on all VPP -| | ... | interfaces. Setup IPv6 addresses on all interfaces. Set segment -| | ... | routing for IPv6 with defined behaviour function and configure IPv6 -| | ... | routes on both DUT nodes. -| | ... -| | ... | *Note:* -| | ... | KW uses test variable rxq_count_int set by KW Add worker threads -| | ... | and rxqueues to all DUTs -| | ... -| | ${sock1}= | Set Variable | memif-DUT1_CNF -| | ${sock2}= | Set Variable | memif-DUT2_CNF -| | Set up memif interfaces on DUT node | ${dut1} | ${sock1} | ${sock1} -| | ... | ${1} | dut1-memif-1-if1 | dut1-memif-1-if2 | ${rxq_count_int} -| | ... | ${rxq_count_int} -| | VPP Set interface MTU | ${dut1} | ${dut1-memif-1-if1} -| | VPP Set interface MTU | ${dut1} | ${dut1-memif-1-if2} -| | Set up memif interfaces on DUT node | ${dut2} | ${sock2} | ${sock2} -| | ... | ${1} | dut2-memif-1-if1 | dut2-memif-1-if2 | ${rxq_count_int} -| | ... | ${rxq_count_int} -| | VPP Set interface MTU | ${dut2} | ${dut2-memif-1-if1} -| | VPP Set interface MTU | ${dut2} | ${dut2-memif-1-if2} -| | :FOR | ${dut} | IN | @{duts} -| | | Show Memif | ${nodes['${dut}']} -| | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if1} | ${dut1_if1_ip6} | ${prefix} -| | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if2} | ${dut1_if2_ip6} | ${prefix} -| | VPP Interface Set IP Address | ${dut1} | ${dut1-memif-1-if1} -| | ... | ${dut1-memif-1-if1_ip6} | ${mem_prefix} -| | VPP Interface Set IP Address | ${dut1} | ${dut1-memif-1-if2} -| | ... | ${dut1-memif-1-if2_ip6} | ${mem_prefix} -| | VPP Interface Set IP Address -| | ... | ${dut2} | ${dut2_if1} | ${dut2_if1_ip6} | ${prefix} -| | VPP Interface Set IP Address -| | ... | ${dut2} | ${dut2_if2} | ${dut2_if2_ip6} | ${prefix} -| | VPP Interface Set IP Address | ${dut2} | ${dut2-memif-1-if1} -| | ... | ${dut2-memif-1-if1_ip6} | ${mem_prefix} -| | VPP Interface Set IP Address | ${dut2} | ${dut2-memif-1-if2} -| | ... | ${dut2-memif-1-if2_ip6} | ${mem_prefix} -| | Vpp All Ra Suppress Link Layer | ${nodes} -| | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if2} | ${dut2_if1_ip6} | ${dut2_if1_mac} -| | VPP Add IP Neighbor -| | ... | ${dut2} | ${dut2_if1} | ${dut1_if2_ip6} | ${dut1_if2_mac} -| | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if1} | ${tg_if1_ip6_subnet}2 | ${tg_if1_mac} -| | VPP Add IP Neighbor -| | ... | ${dut2} | ${dut2_if2} | ${tg_if2_ip6_subnet}2 | ${tg_if2_mac} -| | ${dut1-memif-1-if2_mac}= | Get Interface MAC | ${dut1} | memif2 -| | ${dut2-memif-1-if2_mac}= | Get Interface MAC | ${dut2} | memif2 -| | VPP Add IP Neighbor | ${dut1} -| | ... | ${dut1-memif-1-if1} | ${dut1_nh} | ${dut1-memif-1-if2_mac} -| | VPP Add IP Neighbor | ${dut2} -| | ... | ${dut2-memif-1-if1} | ${dut2_nh} | ${dut2-memif-1-if2_mac} -| | Vpp Route Add | ${dut1} | ${dut2_sid1} | ${sid_prefix} -| | ... | gateway=${dut2_if1_ip6} | interface=${dut1_if2} -| | Vpp Route Add | ${dut1} | ${out_sid2_1} | ${sid_prefix} -| | ... | gateway=${tg_if1_ip6_subnet}2 | interface=${dut1_if1} -| | Vpp Route Add | ${dut2} | ${dut1_sid2} | ${sid_prefix} -| | ... | gateway=${dut1_if2_ip6} | interface=${dut2_if1} -| | Vpp Route Add | ${dut2} | ${out_sid1_1} | ${sid_prefix} -| | ... | gateway=${tg_if2_ip6_subnet}2 | interface=${dut2_if2} -# Configure SRv6 for direction0 on DUT1 -| | Set SR Encaps Source Address on DUT | ${dut1} | ${dut1_sid1} -| | @{sid_list_dir0}= | Create List | ${dut2_sid1} | ${out_sid1_1} -| | ... | ${out_sid1_2} -| | Configure SR Policy on DUT | ${dut1} | ${dut1_bsid} | encap -| | ... | @{sid_list_dir0} -| | Configure SR Steer on DUT | ${dut1} | L3 | ${dut1_bsid} -| | ... | ip_addr=${tg_if2_ip6_subnet} | prefix=${sid_prefix} -# Configure SRv6 for direction1 on DUT2 -| | Set SR Encaps Source Address on DUT | ${dut2} | ${dut2_sid2} -| | @{sid_list_dir1}= | Create List | ${dut1_sid2} | ${out_sid2_1} -| | ... | ${out_sid2_2} -| | Configure SR Policy on DUT | ${dut2} | ${dut2_bsid} | encap -| | ... | @{sid_list_dir1} -| | Configure SR Steer on DUT | ${dut2} | L3 | ${dut2_bsid} -| | ... | ip_addr=${tg_if1_ip6_subnet} | prefix=${sid_prefix} -# Configure SRv6 for direction0 on DUT2 -| | ${dut2_out_if}= | Get Interface Name | ${dut2} | memif1 -| | ${dut2_in_if}= | Get Interface Name | ${dut2} | memif2 -| | Remove Values From List | ${sid_list_dir0} | ${dut2_sid1} -| | Run Keyword If | "${behavior}" == "static_proxy" -| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.as -| | ... | ${NONE} | ${dut2_nh} | ${NONE} | ${dut2_out_if} | ${dut2_in_if} -| | ... | ${dut1_sid1} | @{sid_list_dir0} -| | ... | ELSE IF | "${behavior}" == "dynamic_proxy" -| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.ad -| | ... | next_hop=${dut2_nh} | out_if=${dut2_out_if} | in_if=${dut2_in_if} -| | ... | ELSE IF | "${behavior}" == "masquerading" -| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.am -| | ... | next_hop=${dut2_nh} | out_if=${dut2_out_if} | in_if=${dut2_in_if} -| | ... | ELSE | Fail | Unsupported behaviour: ${behavior} -# Configure SRv6 for direction1 on DUT1 -| | ${dut1_out_if}= | Get Interface Name | ${dut1} | memif1 -| | ${dut1_in_if}= | Get Interface Name | ${dut1} | memif2 -| | Remove Values From List | ${sid_list_dir1} | ${dut1_sid2} -| | Run Keyword If | "${behavior}" == "static_proxy" -| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.as -| | ... | ${NONE} | ${dut1_nh} | ${NONE} | ${dut1_out_if} | ${dut1_in_if} -| | ... | ${dut2_sid2} | @{sid_list_dir1} -| | ... | ELSE IF | "${behavior}" == "dynamic_proxy" -| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.ad -| | ... | next_hop=${dut1_nh} | out_if=${dut1_out_if} | in_if=${dut1_in_if} -| | ... | ELSE IF | "${behavior}" == "masquerading" -| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.am -| | ... | next_hop=${dut1_nh} | out_if=${dut1_out_if} | in_if=${dut1_in_if} -| | ... | ELSE | Fail | Unsupported behaviour: ${behavior} -| | Set interfaces in path up - -| Configure IPv4 ACLs -| | [Documentation] -| | ... | Configure ACL with required number of not-hitting permit ACEs plus two -| | ... | hitting ACEs for both traffic directions. -| | ... -| | ... | *Arguments:* -| | ... | - dut_node - DUT node. Type: dictionary -| | ... | - dut_if1 - DUT node interface1 name (Optional). Type: string -| | ... | - dut_if2 - DUT node interface2 name (Optional). Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure IPv4 ACLs \| ${nodes['DUT1']} \| GigabitEthernet0/7/0 \ -| | ... | \| GigabitEthernet0/8/0 \| -| | ... -| | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - src_ip_start - Source IP address start. Type: string -| | ... | - dst_ip_start - Destination IP address start. Type: string -| | ... | - ip_step - IP address step. Type: string -| | ... | - sport_start - Source port number start. Type: string -| | ... | - dport_start - Destination port number start. Type: string -| | ... | - port_step - Port number step. Type: string -| | ... | - no_hit_aces_number - Number of not-hitting ACEs to be configured. -| | ... | Type: integer -| | ... | - acl_apply_type - To what path apply the ACL - input or output. -| | ... | Type: string -| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect. -| | ... | Type: string -| | ... | - trex_stream1_subnet - IP subnet used by T-Rex in direction 0->1. -| | ... | Type: string -| | ... | - trex_stream2_subnet - IP subnet used by T-Rex in direction 1->0. -| | ... | Type: string -| | ... -| | [Arguments] | ${dut} | ${dut_if1}=${NONE} | ${dut_if2}=${NONE} -| | ${src_ip_int} = | Evaluate -| | ... | int(ipaddress.ip_address(unicode($src_ip_start))) - $ip_step -| | ... | modules=ipaddress -| | ${dst_ip_int} = | Evaluate -| | ... | int(ipaddress.ip_address(unicode($dst_ip_start))) - $ip_step -| | ... | modules=ipaddress -| | ${ip_limit} = | Set Variable | 255.255.255.255 -| | ${ip_limit_int} = | Evaluate -| | ... | int(ipaddress.ip_address(unicode($ip_limit))) | modules=ipaddress -| | ${sport}= | Evaluate | $sport_start - $port_step -| | ${dport}= | Evaluate | $dport_start - $port_step -| | ${port_limit}= | Set Variable | ${65535} -| | ${acl}= | Set Variable | ipv4 permit -| | :FOR | ${nr} | IN RANGE | 0 | ${no_hit_aces_number} -| | | ${src_ip_int} = | Evaluate | $src_ip_int + $ip_step -| | | ${dst_ip_int} = | Evaluate | $dst_ip_int + $ip_step -| | | ${sport}= | Evaluate | $sport + $port_step -| | | ${dport}= | Evaluate | $dport + $port_step -| | | ${ipv4_limit_reached}= | Set Variable If -| | | ... | $src_ip_int > $ip_limit_int or $src_ip_int > $ip_limit_int -| | | ... | ${TRUE} -| | | ${udp_limit_reached}= | Set Variable If -| | | ... | $sport > $port_limit or $dport > $port_limit | ${TRUE} -| | | Run Keyword If | $ipv4_limit_reached is True | Log -| | | ... | Can't do more iterations - IPv4 address limit has been reached. -| | | ... | WARN -| | | Run Keyword If | $udp_limit_reached is True | Log -| | | ... | Can't do more iterations - UDP port limit has been reached. -| | | ... | WARN -| | | ${src_ip} = | Run Keyword If | $ipv4_limit_reached is True -| | | ... | Set Variable | ${ip_limit} -| | | ... | ELSE | Evaluate | str(ipaddress.ip_address($src_ip_int)) -| | | ... | modules=ipaddress -| | | ${dst_ip} = | Run Keyword If | $ipv4_limit_reached is True -| | | ... | Set Variable | ${ip_limit} -| | | ... | ELSE | Evaluate | str(ipaddress.ip_address($dst_ip_int)) -| | | ... | modules=ipaddress -| | | ${sport}= | Set Variable If | ${sport} > $port_limit | $port_limit -| | | ... | ${sport} -| | | ${dport}= | Set Variable If | ${dport} > $port_limit | $port_limit -| | | ... | ${dport} -| | | ${acl}= | Catenate | ${acl} | src ${src_ip}/32 dst ${dst_ip}/32 -| | | ... | sport ${sport} | dport ${dport}, -| | | Exit For Loop If -| | | ... | $ipv4_limit_reached is True or $udp_limit_reached is True -| | ${acl}= | Catenate | ${acl} -| | ... | ipv4 ${acl_action} src ${trex_stream1_subnet}, -| | ... | ipv4 ${acl_action} src ${trex_stream2_subnet} -| | Add Replace Acl Multi Entries | ${dut} | rules=${acl} -| | @{acl_list}= | Create List | ${0} -| | Run Keyword If | 'input' in $acl_apply_type and $dut_if1 is not None -| | ... | Set Acl List For Interface | ${dut} | ${dut_if1} | input | ${acl_list} -| | Run Keyword If | 'input' in $acl_apply_type and $dut_if2 is not None -| | ... | Set Acl List For Interface | ${dut} | ${dut_if2} | input | ${acl_list} -| | Run Keyword If | 'output' in $acl_apply_type and $dut_if1 is not None -| | ... | Set Acl List For Interface | ${dut} | ${dut_if1} | output -| | ... | ${acl_list} -| | Run Keyword If | 'output' in $acl_apply_type and $dut_if2 is not None -| | ... | Set Acl List For Interface | ${dut} | ${dut_if2} | output -| | ... | ${acl_list} - -| Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology -| | [Documentation] -| | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node -| | ... | circular topology. Get the interface MAC addresses and setup ARP on -| | ... | all VPP interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG -| | ... | links. In case of 3-node topology setup IPv4 adresses with /30 prefix -| | ... | on DUT1-DUT2 link and set routing on both DUT nodes with prefix /24 -| | ... | and next hop of neighbour DUT interface IPv4 address. -| | ... | Apply required ACL rules to DUT1 interfaces. -| | ... -| | ... | *Arguments:* -| | ... | - ip_nr - Number of IPs to be used. Type: integer or string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize IPv4 routing for '10' addresses with IPv4 ACLs on DUT1 \ -| | ... | in 3-node circular topology \| -| | ... -| | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - tg - TG node. -| | ... | - dut1 - DUT1 node. -| | ... | - dut2 - DUT2 node. -| | ... | - tg_if1 - TG interface 1 towards DUT1. -| | ... | - tg_if2 - TG interface 2 towards DUT2 (3-node topo) or DUT1 -| | ... | (2-node topo). -| | ... | - dut1_if1 - DUT1 interface 1 towards TG. -| | ... | - dut1_if2 - DUT1 interface 2 towards DUT2 (3-node topo) or TG -| | ... | (2-node topo). -| | ... | - dut2_if1 - DUT2 interface 1 towards DUT1. -| | ... | - dut2_if2 - DUT2 interface 2 towards TG. -| | ... -| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut2} -| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | ${dut2} -| | ... | ELSE | Set Variable | ${dut1} -| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | ${dut2_if2} -| | ... | ELSE | Set Variable | ${dut1_if2} -| | ... -| | Set interfaces in path up -| | ... -| | :FOR | ${number} | IN RANGE | 2 | ${ip_nr}+2 -| | | VPP Add IP Neighbor -| | | ... | ${dut1} | ${dut1_if1} | 10.10.10.${number} | ${tg_if1_mac} -| | | VPP Add IP Neighbor -| | | ... | ${dut} | ${dut_if2} | 20.20.20.${number} | ${tg_if2_mac} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Add IP Neighbor -| | ... | ${dut2} | ${dut2_if1} | 1.1.1.1 | ${dut1_if2_mac} -| | ... -| | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if1} | 10.10.10.1 | 24 -| | VPP Interface Set IP Address -| | ... | ${dut} | ${dut_if2} | 20.20.20.1 | 24 -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if2} | 1.1.1.1 | 30 -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Interface Set IP Address -| | ... | ${dut2} | ${dut2_if1} | 1.1.1.2 | 30 -| | ... -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | gateway=1.1.1.2 -| | ... | interface=${dut1_if2} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | gateway=1.1.1.1 -| | ... | interface=${dut2_if1} -| | ... -| | Configure IPv4 ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2} - -| Configure MACIP ACLs -| | [Documentation] -| | ... | Configure MACIP ACL with required number of not-hitting permit ACEs -| | ... | plus two hitting ACEs for both traffic directions. -| | ... -| | ... | *Arguments:* -| | ... | - dut_node - DUT node. Type: dictionary -| | ... | - dut_if1 - DUT node interface1 name (Optional). Type: string -| | ... | - dut_if2 - DUT node interface2 name (Optional). Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure MACIP ACLs \| ${nodes['DUT1']} \| GigabitEthernet0/7/0 \ -| | ... | \| GigabitEthernet0/8/0 \| -| | ... -| | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - src_ip_start - Source IP address start. Type: string -| | ... | - ip_step - IP address step. Type: string -| | ... | - src_mac_start - Source MAC address start in format with colons. -| | ... | Type: string -| | ... | - src_mac_step - Source MAC address step. Type: string -| | ... | - src_mac_mask - Source MAC address mask. 00:00:00:00:00:00 is a -| | ... | wildcard mask. Type: string -| | ... | - no_hit_aces_number - Number of not-hitting ACEs to be configured. -| | ... | Type: integer -| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect. -| | ... | Type: string -| | ... | - tg_stream1_subnet - IP subnet used by TG in direction 0->1. -| | ... | Type: string -| | ... | - tg_stream2_subnet - IP subnet used by TG in direction 1->0. -| | ... | Type: string -| | ... | - tg_stream1_mac - Source MAC address of traffic stream 1. -| | ... | Type: string -| | ... | - tg_stream2_mac - Source MAC address of traffic stream 2. -| | ... | Type: string -| | ... | - tg_mac_mask - MAC address mask for traffic streams. -| | ... | 00:00:00:00:00:00 is a wildcard mask. Type: string -| | ... -| | [Arguments] | ${dut} | ${dut_if1}=${NONE} | ${dut_if2}=${NONE} -| | ... -| | ${src_ip_int} = | IP To Int | ${src_ip_start} -| | ${src_ip_int} = | Evaluate | ${src_ip_int} - ${ip_step} -| | ... -| | ${ip_limit} = | Set Variable | 255.255.255.255 -| | ${ip_limit_int} = | IP To Int | ${ip_limit} -| | ... -| | ${src_mac_int} = | Mac To Int | ${src_mac_start} -| | ${src_mac_int} = | Evaluate | ${src_mac_int} - ${src_mac_step} -| | ... -| | ${mac_limit} = | Set Variable | ff:ff:ff:ff:ff:ff -| | ${mac_limit_int} = | Mac To Int | ${mac_limit} -| | ... -| | ${acl}= | Set Variable | ipv4 permit -| | :FOR | ${nr} | IN RANGE | 0 | ${no_hit_aces_number} -| | | ${src_ip_int} = | Evaluate | ${src_ip_int} + ${ip_step} -| | | ${src_mac_int} = | Evaluate | ${src_mac_int} + ${src_mac_step} -| | | ${ipv4_limit_reached}= | Set Variable If -| | | ... | ${src_ip_int} > ${ip_limit_int} | ${TRUE} -| | | ${mac_limit_reached}= | Set Variable If -| | | ... | ${src_mac_int} > ${mac_limit_int} | ${TRUE} -| | | Run Keyword If | '${ipv4_limit_reached}' == '${TRUE}' | Log -| | | ... | Can't do more iterations - IPv4 address limit has been reached. -| | | ... | WARN -| | | Run Keyword If | '${mac_limit_reached}' == '${TRUE}' | Log -| | | ... | Can't do more iterations - MAC address limit has been reached. -| | | ... | WARN -| | | ${src_ip} = | Run Keyword If | '${ipv4_limit_reached}' == '${TRUE}' -| | | ... | Set Variable | ${ip_limit} -| | | ... | ELSE | Int To IP | ${src_ip_int} -| | | ${src_mac}= | Run Keyword If | '${mac_limit_reached}' == '${TRUE}' -| | | ... | Set Variable | ${mac_limit} -| | | ... | ELSE | Int To Mac | ${src_mac_int} -| | | ${acl}= | Catenate | ${acl} | ip ${src_ip}/32 -| | | ... | mac ${src_mac} | mask ${src_mac_mask}, -| | | Exit For Loop If | '${ipv4_limit_reached}' == '${TRUE}' or '${mac_limit_reached}' == '${TRUE}' -| | ${acl0}= | Catenate | ${acl} -| | ... | ipv4 ${acl_action} ip ${tg_stream1_subnet} mac ${tg_stream1_mac} -| | ... | mask ${tg_mac_mask} -| | ${acl1}= | Catenate | ${acl} -| | ... | ipv4 ${acl_action} ip ${tg_stream2_subnet} mac ${tg_stream2_mac} -| | ... | mask ${tg_mac_mask} -| | Add Macip Acl Multi Entries | ${dut} | rules=${acl0} -| | Add Macip Acl Multi Entries | ${dut} | rules=${acl1} -| | ${acl_idx}= | Set Variable | 0 -| | Run Keyword Unless | '${dut_if1}' == '${NONE}' -| | ... | Add Del Macip Acl Interface | ${dut} | ${dut_if1} | add | ${acl_idx} -| | ${acl_idx}= | Set Variable | 1 -| | Run Keyword Unless | '${dut_if2}' == '${NONE}' -| | ... | Add Del Macip Acl Interface | ${dut} | ${dut_if2} | add | ${acl_idx} - | Initialize LISP IPv4 forwarding in 3-node circular topology | | [Documentation] | Custom setup of IPv4 addresses on all DUT nodes and TG \ | | ... | Don`t set route. @@ -782,88 +213,3 @@ | | ... | ${dut1} | ${dut1_if2} | ${dut2_dut1_ip4_address} | ${dut2_if1_mac} | | VPP Add IP Neighbor | | ... | ${dut2} | ${dut2_if1} | ${dut1_dut2_ip4_address} | ${dut1_if2_mac} - -| Initialize NAT44 in circular topology -| | [Documentation] | Initialization of 2-node / 3-node topology with NAT44 -| | ... | between DUTs: -| | ... | - set interfaces up -| | ... | - set IP addresses -| | ... | - set ARP -| | ... | - create routes -| | ... | - set NAT44 - only on DUT1 -| | ... -| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut2} -| | ... -| | Set interfaces in path up -| | ... -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 10.0.0.1 | 20 -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} -| | ... | 11.0.0.1 | 20 -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Interface Set IP Address | ${dut2} | ${dut2_if1} -| | ... | 11.0.0.2 | 20 -| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | ${dut2} -| | ... | ELSE | Set Variable | ${dut1} -| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | ${dut2_if2} -| | ... | ELSE | Set Variable | ${dut1_if2} -| | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 12.0.0.1 | 20 -| | ... -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.0.0.2 | ${tg_if1_mac} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if2} | 11.0.0.2 | ${dut2_if1_mac} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Add IP Neighbor -| | ... | ${dut2} | ${dut2_if1} | 11.0.0.1 | ${dut1_if2_mac} -| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 12.0.0.2 | ${tg_if2_mac} -| | ... -| | Vpp Route Add | ${dut1} | 20.0.0.0 | 18 | gateway=10.0.0.2 -| | ... | interface=${dut1_if1} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut1} | 12.0.0.2 | 32 | gateway=11.0.0.2 -| | ... | interface=${dut1_if2} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut2} | 12.0.0.0 | 24 | gateway=12.0.0.2 -| | ... | interface=${dut2_if2} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut2} | 200.0.0.0 | 30 | gateway=11.0.0.1 -| | ... | interface=${dut2_if1} -| | ... -| | Configure inside and outside interfaces -| | ... | ${dut1} | ${dut1_if1} | ${dut1_if2} -| | Configure deterministic mode for NAT44 -| | ... | ${dut1} | 20.0.0.0 | 18 | 200.0.0.0 | 30 - -| Configure ACLs on a single interface -| | [Documentation] -| | ... | Configure ACL -| | ... -| | ... | *Arguments:* -| | ... | - dut - DUT node. Type: string -| | ... | - dut_if - DUT node interface name. Type: string -| | ... | - acl_apply_type - To what path apply the ACL - input or output. -| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect. -| | ... | - subnets - Subnets to apply the specific ACL. Type: list -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure ACLs on a single interface \| ${nodes['DUT1']} -| | ... | \| ... \| GigabitEthernet0/7/0 \| input \| permit | 0.0.0.0/0 -| | ... -| | [Arguments] | ${dut} | ${dut_if} | ${acl_apply_type} | ${acl_action} -| | ... | @{subnets} -| | Set Test variable | ${acl} | ${EMPTY} -| | :FOR | ${subnet} | IN | @{subnets} -| | | ${acl} = | Run Keyword If | '${acl}' == '${EMPTY}' -| | | ... | Set Variable | ipv4 ${acl_action} src ${subnet} -| | | ... | ELSE -| | | ... | Catenate | SEPARATOR=", " | ${acl} -| | | ... | ipv4 ${acl_action} src ${subnet} -| | Add Replace Acl Multi Entries | ${dut} | rules=${acl} -| | @{acl_list} = | Create List | ${0} -| | Set Acl List For Interface | ${dut} | ${dut_if} | ${acl_apply_type} -| | ... | ${acl_list} diff --git a/resources/libraries/robot/performance/performance_utils.robot b/resources/libraries/robot/performance/performance_utils.robot index 8507ae68f5..7f971378e3 100644 --- a/resources/libraries/robot/performance/performance_utils.robot +++ b/resources/libraries/robot/performance/performance_utils.robot @@ -23,18 +23,9 @@ | Library | resources.libraries.python.TrafficGenerator.OptimizedSearch | Library | resources.libraries.python.TrafficGenerator.TGDropRateSearchImpl | Library | resources.libraries.python.Trace -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/counters.robot -| Resource | resources/libraries/robot/shared/container.robot -| Resource | resources/libraries/robot/shared/memif.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -| Resource | resources/libraries/robot/l2/l2_xconnect.robot -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/ip/ip6.robot -| Resource | resources/libraries/robot/l2/tagging.robot -| Documentation | Performance suite keywords - utilities to find and verify NDR -| ... | and PDR. +| ... +| Documentation +| ... | Performance suite keywords - utilities to find and verify NDR and PDR. *** Keywords *** | Find NDR and PDR intervals using optimized search diff --git a/resources/libraries/robot/shared/counters.robot b/resources/libraries/robot/shared/counters.robot index 728e8c8b55..2746a1abc9 100644 --- a/resources/libraries/robot/shared/counters.robot +++ b/resources/libraries/robot/shared/counters.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2019 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -12,15 +12,11 @@ # limitations under the License. *** Settings *** -| Documentation | VPP counters keywords | Library | resources.libraries.python.VppCounters +| ... +| Documentation | VPP counters keywords *** Keywords *** -| Clear interface counters on all vpp nodes in topology -| | [Documentation] | Clear interface counters on all VPP nodes in topology -| | [Arguments] | ${nodes} -| | Clear Interface Counters on all DUTs | ${nodes} - | Clear all counters on all DUTs | | [Documentation] | Clear runtime, interface, hardware and error counters | | ... | on all DUTs with VPP instance diff --git a/resources/libraries/robot/shared/default.robot b/resources/libraries/robot/shared/default.robot index d867e79da9..751fbc3e6e 100644 --- a/resources/libraries/robot/shared/default.robot +++ b/resources/libraries/robot/shared/default.robot @@ -30,6 +30,7 @@ | Library | resources.libraries.python.PapiHistory | Library | resources.libraries.python.SchedUtils | Library | resources.libraries.python.Tap +| Library | resources.libraries.python.TestConfig | Library | resources.libraries.python.TGSetup | Library | resources.libraries.python.topology.Topology | Library | resources.libraries.python.Trace @@ -53,6 +54,7 @@ | Resource | resources/libraries/robot/shared/counters.robot | Resource | resources/libraries/robot/shared/interfaces.robot | Resource | resources/libraries/robot/shared/container.robot +| Resource | resources/libraries/robot/shared/memif.robot | Resource | resources/libraries/robot/shared/suite_teardown.robot | Resource | resources/libraries/robot/shared/suite_setup.robot | Resource | resources/libraries/robot/shared/test_teardown.robot diff --git a/resources/libraries/robot/shared/traffic.robot b/resources/libraries/robot/shared/traffic.robot index 173a52ee92..9a0728a967 100644 --- a/resources/libraries/robot/shared/traffic.robot +++ b/resources/libraries/robot/shared/traffic.robot @@ -839,4 +839,52 @@ | | ... | --src_mac ${src_mac} | --dst_ip ${dst_ip} | --src_ip ${src_ip} | | ... | --timeout ${timeout} | | Run Traffic Script On Node | send_icmp_wait_for_reply.py -| | ... | ${tg_node} | ${args} \ No newline at end of file +| | ... | ${tg_node} | ${args} + +| Send IPsec Packet and verify ESP encapsulation in received packet +| | [Documentation] | Send IPsec packet from TG to DUT. Receive IPsec packet\ +| | ... | from DUT on TG and verify ESP encapsulation. +| | ... +| | ... | *Arguments:* +| | ... | - node - TG node. Type: dictionary +| | ... | - interface - TG Interface. Type: string +| | ... | - dst_mac - Destination MAC. Type: string +| | ... | - crypto_alg - Encrytion algorithm. Type: enum +| | ... | - crypto_key - Encryption key. Type: string +| | ... | - integ_alg - Integrity algorithm. Type: enum +| | ... | - integ_key - Integrity key. Type: string +| | ... | - l_spi - Local SPI. Type: integer +| | ... | - r_spi - Remote SPI. Type: integer +| | ... | - l_ip - Local IP address. Type: string +| | ... | - r_ip - Remote IP address. Type: string +| | ... | - l_tunnel - Local tunnel IP address (optional). Type: string +| | ... | - r_tunnel - Remote tunnel IP address (optional). Type: string +| | ... +| | ... | *Example:* +| | ... | \| ${encr_alg}= \| Crypto Alg AES CBC 128 \| +| | ... | \| ${auth_alg}= \| Integ Alg SHA1 96 \| +| | ... | \| Send IPsec Packet and verify ESP encapsulation in received packet\ +| | ... | \| ${nodes['TG']} \| eth1 \ +| | ... | \| 52:54:00:d4:d8:22 \| ${encr_alg} \| sixteenbytes_key \ +| | ... | \| ${auth_alg} \| twentybytessecretkey \| ${1001} \| ${1000} \ +| | ... | \| 192.168.3.3 \| 192.168.4.4 \| 192.168.100.2 \| 192.168.100.3 \| +| | ... +| | [Arguments] | ${node} | ${interface} | ${dst_mac} | ${crypto_alg} +| | ... | ${crypto_key} | ${integ_alg} | ${integ_key} | ${l_spi} +| | ... | ${r_spi} | ${l_ip} | ${r_ip} | ${l_tunnel}=${None} +| | ... | ${r_tunnel}=${None} +| | ... +| | ${src_mac}= | Get Interface Mac | ${node} | ${interface} +| | ${if_name}= | Get Interface Name | ${node} | ${interface} +| | ${args}= | Traffic Script Gen Arg | ${if_name} | ${if_name} | ${src_mac} +| | ... | ${dst_mac} | ${l_ip} | ${r_ip} +| | ${crypto_alg_str}= | Get Crypto Alg Scapy Name | ${crypto_alg} +| | ${integ_alg_str}= | Get Integ Alg Scapy Name | ${integ_alg} +| | ${args}= | Catenate | ${args} | --crypto_alg ${crypto_alg_str} +| | ... | --crypto_key ${crypto_key} | --integ_alg ${integ_alg_str} +| | ... | --integ_key ${integ_key} | --l_spi ${l_spi} | --r_spi ${r_spi} +| | ${args}= | Set Variable If | "${l_tunnel}" == "${None}" | ${args} +| | ... | ${args} --src_tun ${l_tunnel} +| | ${args}= | Set Variable If | "${r_tunnel}" == "${None}" | ${args} +| | ... | ${args} --dst_tun ${r_tunnel} +| | Run Traffic Script On Node | ipsec.py | ${node} | ${args} diff --git a/tests/nsh_sfc/func/classifier/eth2p-ethip4-sfc-classifier-func.robot b/tests/nsh_sfc/func/classifier/eth2p-ethip4-sfc-classifier-func.robot index 184715ee01..b922771ea1 100644 --- a/tests/nsh_sfc/func/classifier/eth2p-ethip4-sfc-classifier-func.robot +++ b/tests/nsh_sfc/func/classifier/eth2p-ethip4-sfc-classifier-func.robot @@ -26,7 +26,7 @@ | ... | Setup DUT nodes for 'Classifier' functional testing | Test Setup | Run Keywords | Save VPP PIDs | AND | ... | Reset PAPI History On All DUTs | ${nodes} | AND -| ... | Clear interface counters on all vpp nodes in topology | ${nodes} +| ... | Clear Interface Counters on all DUTs | ${nodes} | Test Teardown | Run Keywords | ... | Show packet trace on all DUTs | ${nodes} | AND | ... | Show PAPI History On All DUTs | ${nodes} | AND diff --git a/tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-inbound-func.robot b/tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-inbound-func.robot index 9733576f4c..518ed2a3fc 100644 --- a/tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-inbound-func.robot +++ b/tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-inbound-func.robot @@ -26,7 +26,7 @@ | ... | Setup DUT nodes for 'Proxy Inbound' functional testing | Test Setup | Run Keywords | Save VPP PIDs | AND | ... | Reset PAPI History On All DUTs | ${nodes} | AND -| ... | Clear interface counters on all vpp nodes in topology | ${nodes} +| ... | Clear Interface Counters on all DUTs | ${nodes} | Test Teardown | Run Keywords | ... | Show packet trace on all DUTs | ${nodes} | AND | ... | Show PAPI History On All DUTs | ${nodes} | AND diff --git a/tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-outbound-func.robot b/tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-outbound-func.robot index 8bddfc99b5..b228511cad 100644 --- a/tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-outbound-func.robot +++ b/tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-outbound-func.robot @@ -26,7 +26,7 @@ | ... | Setup DUT nodes for 'Proxy Outbound' functional testing | Test Setup | Run Keywords | Save VPP PIDs | AND | ... | Reset PAPI History On All DUTs | ${nodes} | AND -| ... | Clear interface counters on all vpp nodes in topology | ${nodes} +| ... | Clear Interface Counters on all DUTs | ${nodes} | Test Teardown | Run Keywords | ... | Show packet trace on all DUTs | ${nodes} | AND | ... | Show PAPI History On All DUTs | ${nodes} | AND diff --git a/tests/nsh_sfc/func/sff/eth2p-ethip4-sfc-sff-func.robot b/tests/nsh_sfc/func/sff/eth2p-ethip4-sfc-sff-func.robot index 382436a99a..e86c659f8c 100644 --- a/tests/nsh_sfc/func/sff/eth2p-ethip4-sfc-sff-func.robot +++ b/tests/nsh_sfc/func/sff/eth2p-ethip4-sfc-sff-func.robot @@ -26,7 +26,7 @@ | ... | Setup DUT nodes for 'SFF' functional testing | Test Setup | Run Keywords | Save VPP PIDs | AND | ... | Reset PAPI History On All DUTs | ${nodes} | AND -| ... | Clear interface counters on all vpp nodes in topology | ${nodes} +| ... | Clear Interface Counters on all DUTs | ${nodes} | Test Teardown | Run Keywords | ... | Show packet trace on all DUTs | ${nodes} | AND | ... | Show PAPI History On All DUTs | ${nodes} | AND diff --git a/tests/vpp/func/l2bd/eth2p-dot1ad--dot1q-l2bdbasemaclrn-vlantrans21-func.robot b/tests/vpp/func/l2bd/eth2p-dot1ad--dot1q-l2bdbasemaclrn-vlantrans21-func.robot deleted file mode 100644 index 38f370ef34..0000000000 --- a/tests/vpp/func/l2bd/eth2p-dot1ad--dot1q-l2bdbasemaclrn-vlantrans21-func.robot +++ /dev/null @@ -1,221 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/l2/tagging.robot -| Resource | resources/libraries/robot/l2/l2_traffic.robot -| Library | resources.libraries.python.Trace -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | SKIP_VPP_PATCH -| Test Setup | Set up functional test -| Test Teardown | Tear down functional test -| Documentation | *L2BD with VLAN tag rewrite test cases - transalte-2-1* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet encapsulations:* Eth-dot1ad-IPv4-ICMPv4 or -| ... | Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, Eth-dot1q-IPv4-ICMPv4 or -| ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv4-ICMPv4 or Eth-IPv6-ICMPv6 -| ... | on TG-DUT2 for L2 switching of IPv4/IPv6. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with bridge domain (L2BD) -| ... | switching combined with MAC learning enabled and added VLAN -| ... | sub-interface with VLAN tag rewrite translate-2-1 method of interface -| ... | towards TG and interface towards DUT2. DUT2 is configured with L2 -| ... | bridge domain (L2BD) switching between VLAN sub-interface with VLAN tag -| ... | rewrite pop-1 method of interface towards DUT1 and interface towards TG. -| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are -| ... | sent from TG on link to DUT1 and received in TG on link form DUT2; -| ... | on receive TG verifies packets for correctness and their IPv4 src-addr, -| ... | dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q, IEEE 802.1ad. - -*** Variables *** -| ${bd_id1}= | 1 - -| ${subid}= | 10 - -| ${outer_vlan_id1}= | 110 -| ${outer_vlan_id2}= | 120 -| ${outer_vlan_wrong}= | 150 - -| ${inner_vlan_id1}= | 210 - -| ${src_ip6}= | 3ffe:63::1 -| ${dst_ip6}= | 3ffe:63::2 - -*** Test Cases *** -| TC01: DUT1 and DUT2 with L2BD and VLAN translate-2-1 (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1, \ -| | ... | Eth-dot1q-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to -| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite -| | ... | translate-2-1 method; on DUT2 configure L2 bridge domain (L2BD) with -| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv4 Echo Req -| | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Send ICMP packet and verify received packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} - -| TC02: DUT1 and DUT2 with L2BD and VLAN translate-2-1 with wrong tag used (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1, \ -| | ... | Eth-dot1q-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to -| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite -| | ... | translate-2-1 method to set tag different from tag set on VLAN -| | ... | sub-interface of DUT2; on DUT2 configure L2 bridge domain (L2BD) with -| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv4 Echo Req -| | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is not received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_wrong} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} - - -| TC03: DUT1 and DUT2 with L2BD and VLAN translate-2-1 (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, \ -| | ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to -| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite -| | ... | translate-2-1 method; on DUT2 configure L2 bridge domain (L2BD) with -| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv6 Echo Req -| | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Send ICMP packet and verify received packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip6} -| | ... | dst_ip=${dst_ip6} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} - -| TC04: DUT1 and DUT2 with L2BD and VLAN translate-2-1 with wrong tag used (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, \ -| | ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to -| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite -| | ... | translate-2-1 method to set tag different from tag set on VLAN -| | ... | sub-interface of DUT2; on DUT2 configure L2 bridge domain (L2BD) with -| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv6 Echo Req -| | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is not received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_wrong} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} diff --git a/tests/vpp/func/l2bd/eth2p-dot1ad-l2bdbasemaclrn-vlantrans22-func.robot b/tests/vpp/func/l2bd/eth2p-dot1ad-l2bdbasemaclrn-vlantrans22-func.robot deleted file mode 100644 index 06a4794086..0000000000 --- a/tests/vpp/func/l2bd/eth2p-dot1ad-l2bdbasemaclrn-vlantrans22-func.robot +++ /dev/null @@ -1,405 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/l2/tagging.robot -| Resource | resources/libraries/robot/l2/l2_traffic.robot -| Library | resources.libraries.python.Trace -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | SKIP_VPP_PATCH -| Test Setup | Set up functional test -| Test Teardown | Tear down functional test -| Documentation | *L2BD with VLAN tag rewrite test cases - translate-2-2* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet encapsulations:* Eth-dot1ad-IPv4-ICMPv4 or -| ... | Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and DUT1-DUT2, Eth-IPv4-ICMPv4 or -| ... | Eth-IPv6-ICMPv6 on TG-DUT2 for L2 switching of IPv4/IPv6. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with bridge domain (L2BD) -| ... | switching combined with MAC learning enabled and added VLAN -| ... | sub-interface with VLAN tag rewrite translate-2-2 method of interface -| ... | towards TG and interface towards DUT2. DUT2 is configured with L2 -| ... | bridge domain (L2BD) switching between VLAN sub-interface with VLAN tag -| ... | rewrite pop-2 method of interface towards DUT1 and interface towards TG. -| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are -| ... | sent from TG on link to DUT1 and received in TG on link form DUT2; -| ... | on receive TG verifies packets for correctness and their IPv4 src-addr, -| ... | dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q, IEEE 802.1ad. - -*** Variables *** -| ${bd_id1}= | 1 - -| ${subid}= | 10 - -| ${outer_vlan_id1}= | 110 -| ${outer_vlan_id2}= | 120 -| ${outer_vlan_wrong}= | 150 - -| ${inner_vlan_id1}= | 210 -| ${inner_vlan_id2}= | 220 -| ${inner_vlan_wrong}= | 250 - -| ${src_ip6}= | 3ffe:63::1 -| ${dst_ip6}= | 3ffe:63::2 - -*** Test Cases *** -| TC01: DUT1 and DUT2 with L2BD and VLAN translate-2-2 switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method; -| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG and -| | ... | one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-2 -| | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify -| | ... | that packet is received. [Ref] IEEE 802.1ad -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Send ICMP packet and verify received packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} - -| TC02: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong inner tag used (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set inner tag different from inner tag set on Dot1ad sub-interface of -| | ... | DUT2; on DUT2 configure L2 bridge domain (L2BD) with one interface to -| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite -| | ... | pop-2 tagged with Dot1ad tags from one of its interfaces to another -| | ... | one method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; -| | ... | verify that packet is not received. [Ref] IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} - -| TC03: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong outer tag used (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set outer tag different from outer tag set on Dot1ad sub-interface of -| | ... | DUT2; on DUT2 configure L2 bridge domain (L2BD) with one interface to -| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite -| | ... | pop-2 tagged with Dot1ad tags from one of its interfaces to another -| | ... | one method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; -| | ... | verify that packet is not received. [Ref] IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} - -| TC04: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong outer and inner tags used (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set tags different from tags set on Dot1ad sub-interface of DUT2; -| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG -| | ... | and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-2 -| | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify -| | ... | that packet is not received. [Ref] IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} - -| TC05: DUT1 and DUT2 with L2BD and VLAN translate-2-2 switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method; -| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG and -| | ... | one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1 -| | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify -| | ... | that packet is received. [Ref] IEEE 802.1ad -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Send ICMP packet and verify received packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip6} -| | ... | dst_ip=${dst_ip6} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} - -| TC06: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong inner tag used (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set inner tag different from inner tag set on Dot1ad sub-interface of -| | ... | DUT2; on DUT2 configure L2 bridge domain (L2BD) with one interface to -| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite -| | ... | pop-1 tagged with Dot1ad tags from one of its interfaces to another -| | ... | one method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; -| | ... | verify that packet is not received. [Ref] IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} - -| TC07: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong outer tag used (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set outer tag different from outer tag set on Dot1ad sub-interface of -| | ... | DUT2; on DUT2 configure L2 bridge domain (L2BD) with one interface to -| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite -| | ... | pop-1 tagged with Dot1ad tags from one of its interfaces to another -| | ... | one method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; -| | ... | verify that packet is not received. [Ref] IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} - -| TC08: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong outer and inner tags used (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set tags different from tags set on Dot1ad sub-interface of DUT2; -| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG -| | ... | and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1 -| | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify -| | ... | that packet is not received. [Ref] IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} diff --git a/tests/vpp/func/l2xc/eth2p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot b/tests/vpp/func/l2xc/eth2p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot deleted file mode 100644 index c0e8c5c899..0000000000 --- a/tests/vpp/func/l2xc/eth2p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot +++ /dev/null @@ -1,189 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/l2/tagging.robot -| Resource | resources/libraries/robot/l2/l2_traffic.robot -| Library | resources.libraries.python.Trace -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | SKIP_VPP_PATCH -| Test Setup | Set up functional test -| Test Teardown | Tear down functional test -| Documentation | *L2XC with VLAN tag rewrite test cases - translate-2-1* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet encapsulations:* Eth-dot1ad-IPv4-ICMPv4 or -| ... | Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, Eth-dot1q-IPv4-ICMPv4 or -| ... | Eth-dot1aq-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2 -| ... | for L2 switching of IPv4/IPv6. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect -| ... | (L2XC) switching between VLAN sub-interface with VLAN tag rewrite -| ... | translate-2-1 method of interface towards TG and interface towards DUT2. -| ... | DUT2 is configured configured with L2 cross-connect (L2XC) switching -| ... | between VLAN sub-interface with VLAN tag rewrite pop-1 method -| ... | of interface towards DUT1 and interface towards TG. -| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are -| ... | sent from TG on link to DUT1 and received in TG on link form DUT2; -| ... | on receive TG verifies packets for correctness and their IPv4 src-addr, -| ... | dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q, IEEE 802.1ad. - -*** Variables *** -| ${subid}= | 10 - -| ${outer_vlan_id1}= | 110 -| ${outer_vlan_id2}= | 120 -| ${outer_vlan_wrong}= | 150 - -| ${inner_vlan_id1}= | 210 - -| ${src_ip}= | 3ffe:63::1 -| ${dst_ip}= | 3ffe:63::2 - -*** Test Cases *** -| TC01: DUT1 and DUT2 with L2XC and VLAN translate-2-1 (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1, \ -| | ... | Eth-dot1q-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to -| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite -| | ... | translate-2-1 method; on DUT2 configure L2 cross-connect (L2XC) with -| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv4 Echo Req -| | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Connect interfaces and VLAN sub-interfaces using L2XC -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Send ICMP packet and verify received packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} - -| TC02: DUT1 and DUT2 with L2XC and VLAN translate-2-1 with wrong tag used (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1, \ -| | ... | Eth-dot1q-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to -| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite -| | ... | translate-2-1 method to set tag different from tag set on VLAN -| | ... | sub-interface of DUT2; on DUT2 configure L2 cross-connect (L2XC) with -| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv4 Echo Req -| | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is not received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_wrong} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Connect interfaces and VLAN sub-interfaces using L2XC -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} - -| TC03: DUT1 and DUT2 with L2XC and VLAN translate-2-1 (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, \ -| | ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to -| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite -| | ... | translate-2-1 method; on DUT2 configure L2 cross-connect (L2XC) with -| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv6 Echo Req -| | ... | tagegd with Dot1ad tags from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Connect interfaces and VLAN sub-interfaces using L2XC -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Send ICMP packet and verify received packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip} -| | ... | dst_ip=${dst_ip} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} - -| TC04: DUT1 and DUT2 with L2XC and VLAN translate-2-1 with wrong tag used (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, \ -| | ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to -| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite -| | ... | translate-2-1 method to set tag different from tag set on VLAN -| | ... | sub-interface of DUT2; on DUT2 configure L2 cross-connect (L2XC) with -| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv6 Echo Req -| | ... | tagegd with Dot1ad tags from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is not received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_wrong} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Connect interfaces and VLAN sub-interfaces using L2XC -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} diff --git a/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-func.robot b/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-func.robot index f030e618f7..e3f0571047 100644 --- a/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-func.robot +++ b/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-func.robot @@ -62,8 +62,9 @@ | | And Configure L2 tag rewrite method on interfaces | | ... | ${dut1_node} | ${subif_index_1} | ${dut2_node} | ${subif_index_2} | | ... | ${tag_rewrite_method} -| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | And Configure L2XC | | ... | ${dut1_node} | ${dut1_to_tg} | ${subif_index_1} +| | And Configure L2XC | | ... | ${dut2_node} | ${dut2_to_tg} | ${subif_index_2} | | Then Send ICMP packet and verify received packet | | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} diff --git a/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-vlantrans22-func.robot b/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-vlantrans22-func.robot deleted file mode 100644 index 14406da97f..0000000000 --- a/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-vlantrans22-func.robot +++ /dev/null @@ -1,346 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/l2/tagging.robot -| Resource | resources/libraries/robot/l2/l2_traffic.robot -| Library | resources.libraries.python.Trace -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | SKIP_VPP_PATCH -| Test Setup | Set up functional test -| Test Teardown | Tear down functional test -| Documentation | *L2XC with VLAN tag rewrite test cases - translate-2-2* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet encapsulations:* Eth-dot1ad-IPv4-ICMPv4 or -| ... | Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and DUT1-DUT2, Eth-IPv4-ICMPv4 or -| ... | Eth-IPv6-ICMPv6 on TG-DUT2 for L2 switching of IPv4/IPv6. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect -| ... | (L2XC) switching between VLAN sub-interface with VLAN tag rewrite -| ... | translate-2-2 method of interface towards TG and interface towards DUT2. -| ... | DUT2 is configured configured with L2 cross-connect (L2XC) switching -| ... | between VLAN sub-interface with VLAN tag rewrite pop-2 method -| ... | of interface towards DUT1 and interface towards TG. -| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are -| ... | sent from TG on link to DUT1 and received in TG on link form DUT2; -| ... | on receive TG verifies packets for correctness and their IPv4 src-addr, -| ... | dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q, IEEE 802.1ad. - -*** Variables *** -| ${subid}= | 10 - -| ${outer_vlan_id1}= | 110 -| ${outer_vlan_id2}= | 120 -| ${outer_vlan_wrong}= | 150 - -| ${inner_vlan_id1}= | 210 -| ${inner_vlan_id2}= | 220 -| ${inner_vlan_wrong}= | 250 - -| ${src_ip}= | 3ffe:63::1 -| ${dst_ip}= | 3ffe:63::2 - -*** Test Cases *** -| TC01: DUT1 and DUT2 with L2XC and VLAN translate-2-2 switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method; -| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG and -| | ... | one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1 -| | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify -| | ... | that packet is received. [Ref] IEEE 802.1ad -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Connect interfaces and VLAN sub-interfaces using L2XC -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Send ICMP packet and verify received packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} - -| TC02: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong inner tag used (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set inner tag different from inner tag set on Dot1ad sub-interface of -| | ... | DUT2; on DUT2 configure L2 cross-connect (L2XC) with one interface to -| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite -| | ... | pop-1 tagged with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify -| | ... | that packet is not received. [Ref] IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Connect interfaces and VLAN sub-interfaces using L2XC -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} - -| TC03: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer tag used (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set outer tag different from outer tag set on Dot1ad sub-interface of -| | ... | DUT2; on DUT2 configure L2 cross-connect (L2XC) with one interface to -| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite -| | ... | pop-1 tagged with Dot1ad tags from one of its interfaces to another -| | ... | one method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; -| | ... | verify that packet is not received. [Ref] IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Connect interfaces and VLAN sub-interfaces using L2XC -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} - -| TC04: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer and inner tags used (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set tags different from tags set on Dot1ad sub-interface of DUT2; -| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG -| | ... | and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1 -| | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify -| | ... | that packet is not received. [Ref] IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Connect interfaces and VLAN sub-interfaces using L2XC -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} - -| TC05: DUT1 and DUT2 with L2XC and VLAN translate-2-2 switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method; -| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG and -| | ... | one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1 -| | ... | tagegd with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify -| | ... | that packet is received. [Ref] IEEE 802.1ad -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Connect interfaces and VLAN sub-interfaces using L2XC -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Send ICMP packet and verify received packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip} -| | ... | dst_ip=${dst_ip} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} - -| TC06: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong inner tag used (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set inner tag different from inner tag set on Dot1ad sub-interface of -| | ... | DUT2; on DUT2 configure L2 cross-connect (L2XC) with one interface to -| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite -| | ... | pop-1 tagegd with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify -| | ... | that packet is not received. [Ref] IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Connect interfaces and VLAN sub-interfaces using L2XC -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} - -| TC07: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer tag used (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set outer tag different from outer tag set on Dot1ad sub-interface of -| | ... | DUT2; on DUT2 configure L2 cross-connect (L2XC) with one interface to -| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite -| | ... | pop-1 tagegd with Dot1ad tags from one of its interfaces to another -| | ... | one method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; -| | ... | verify that packet is not received. [Ref] IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Connect interfaces and VLAN sub-interfaces using L2XC -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} - -| TC08: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer and inner tags used (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set tags different from tags set on Dot1ad sub-interface of DUT2; -| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG -| | ... | and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1 -| | ... | tagegd with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify -| | ... | that packet is not received. [Ref] IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Connect interfaces and VLAN sub-interfaces using L2XC -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot index 71419b5df9..381c09cb27 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | input | ${no_hit_aces_number}= | 10 | ${flows_per_dir}= | 100 +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot index 3fa03d1c30..0c8aaa0988 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | input | ${no_hit_aces_number}= | 10 | ${flows_per_dir}= | 100k +| ${ip_nr}= | ${100} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 100 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot index 61673c6dcf..08ca48e24b 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | input | ${no_hit_aces_number}= | 10 | ${flows_per_dir}= | 10k +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot index 261d1718c6..8d9769bba3 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | input | ${no_hit_aces_number}= | 10 | ${flows_per_dir}= | 100 +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot index 0869a58cc8..e869784249 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | input | ${no_hit_aces_number}= | 10 | ${flows_per_dir}= | 100k +| ${ip_nr}= | ${100} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 100 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot index d52f9d8c00..f156c1e276 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | input | ${no_hit_aces_number}= | 10 | ${flows_per_dir}= | 10k +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot index 642c802661..f59dc58550 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | input | ${no_hit_aces_number}= | 1 | ${flows_per_dir}= | 100 +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot index fc201e761c..166a57d097 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | input | ${no_hit_aces_number}= | 1 | ${flows_per_dir}= | 100k +| ${ip_nr}= | ${100} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 100 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot index cecf7338ac..d37416efa4 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | input | ${no_hit_aces_number}= | 1 | ${flows_per_dir}= | 10k +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -89,8 +90,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot index 049b649d03..aca0b05668 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | input | ${no_hit_aces_number}= | 1 | ${flows_per_dir}= | 100 +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot index ae2cb58b77..b5ddf3deed 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot @@ -51,6 +51,7 @@ | ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} +| ${ip_nr}= | ${100} # ACL test setup | ${acl_action}= | permit | ${acl_apply_type}= | input @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 100 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot index c8fdba2eb8..845868661c 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | input | ${no_hit_aces_number}= | 1 | ${flows_per_dir}= | 10k +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -89,8 +90,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot index 78d7679aaa..2682a4c0ae 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | input | ${no_hit_aces_number}= | 50 | ${flows_per_dir}= | 100 +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot index 43cf6b4a29..3af4c48a66 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | input | ${no_hit_aces_number}= | 50 | ${flows_per_dir}= | 100k +| ${ip_nr}= | ${100} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 100 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot index cf8a757ec7..c5b92b7f0b 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | input | ${no_hit_aces_number}= | 50 | ${flows_per_dir}= | 10k +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -89,8 +90,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot index b1be819909..7db631aa65 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | input | ${no_hit_aces_number}= | 50 | ${flows_per_dir}= | 100 +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot index 3fed11a167..13e0c69395 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | input | ${no_hit_aces_number}= | 50 | ${flows_per_dir}= | 100k +| ${ip_nr}= | ${100} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 100 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot index 2b457766d6..0d25ee22b0 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | input | ${no_hit_aces_number}= | 50 | ${flows_per_dir}= | 10k +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -89,8 +90,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot index 6e43a21612..5726c02ec2 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | output | ${no_hit_aces_number}= | 10 | ${flows_per_dir}= | 100 +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot index 7a902bc9d2..bc806f3ce4 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | output | ${no_hit_aces_number}= | 10 | ${flows_per_dir}= | 100k +| ${ip_nr}= | ${100} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 100 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot index 56bad45cd2..36eeeafa07 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | output | ${no_hit_aces_number}= | 10 | ${flows_per_dir}= | 10k +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot index 1b11aeb52a..6291183cdc 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | output | ${no_hit_aces_number}= | 10 | ${flows_per_dir}= | 100 +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot index c971f7f362..87129b5593 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | output | ${no_hit_aces_number}= | 10 | ${flows_per_dir}= | 100k +| ${ip_nr}= | ${100} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 100 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot index e4418146d8..00a69a03bf 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | output | ${no_hit_aces_number}= | 10 | ${flows_per_dir}= | 10k +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot index 5f23e46b96..148c8375e4 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | output | ${no_hit_aces_number}= | 1 | ${flows_per_dir}= | 100 +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot index 1f41774a60..083c09bcc3 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | output | ${no_hit_aces_number}= | 1 | ${flows_per_dir}= | 100k +| ${ip_nr}= | ${100} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 100 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot index 3c1287e9b5..0a97cd8035 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | output | ${no_hit_aces_number}= | 1 | ${flows_per_dir}= | 10k +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot index 24087530ca..be06969aac 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | output | ${no_hit_aces_number}= | 1 | ${flows_per_dir}= | 100 +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot index b9d5ed18eb..7c87cb3f5e 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | output | ${no_hit_aces_number}= | 1 | ${flows_per_dir}= | 100k +| ${ip_nr}= | ${100} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 100 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot index a3aa66e59e..e41be6d6d2 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | output | ${no_hit_aces_number}= | 1 | ${flows_per_dir}= | 10k +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot index c1a61b7488..4bf8704ac8 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | output | ${no_hit_aces_number}= | 50 | ${flows_per_dir}= | 100 +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot index fa2e15f8aa..8442f765e6 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | output | ${no_hit_aces_number}= | 50 | ${flows_per_dir}= | 100k +| ${ip_nr}= | ${100} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 100 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot index 809fb624eb..5254073bb3 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | output | ${no_hit_aces_number}= | 50 | ${flows_per_dir}= | 10k +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot index 18f4b1e5e7..22a8d34304 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | output | ${no_hit_aces_number}= | 50 | ${flows_per_dir}= | 100 +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot index 72f61ffac7..2eefcd82ea 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | output | ${no_hit_aces_number}= | 50 | ${flows_per_dir}= | 100k +| ${ip_nr}= | ${100} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 100 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot index 5eecf988a8..d1fb20f411 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot @@ -56,6 +56,7 @@ | ${acl_apply_type}= | output | ${no_hit_aces_number}= | 50 | ${flows_per_dir}= | 10k +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot index 37d3e5f5f2..33c88699e4 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot @@ -55,6 +55,7 @@ | ${acl_apply_type}= | input | ${no_hit_aces_number}= | 1 | ${flows_per_dir}= | 10k +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot index 56dd8f985f..283f5beb24 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot @@ -55,6 +55,7 @@ | ${acl_apply_type}= | input | ${no_hit_aces_number}= | 1 | ${flows_per_dir}= | 10k +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot index d7f28986ed..51653232cb 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot @@ -55,6 +55,7 @@ | ${acl_apply_type}= | input | ${no_hit_aces_number}= | 50 | ${flows_per_dir}= | 10k +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot index ef1cac7fd0..08c3b5429c 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot @@ -55,6 +55,7 @@ | ${acl_apply_type}= | input | ${no_hit_aces_number}= | 50 | ${flows_per_dir}= | 10k +| ${ip_nr}= | ${10} # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -88,8 +89,8 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | ${ip_nr}= | Set Variable | 10 -| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology +| | When Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot index 29d3114fc1..e3dba2f5e8 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot @@ -88,8 +88,9 @@ | | And Configure L2 tag rewrite method on interfaces | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} | | ... | ${tag_rewrite} -| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | And Configure L2XC | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} +| | And Configure L2XC | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot index a4a9ef9a29..8e06a53e23 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot @@ -82,8 +82,9 @@ | | And Configure L2 tag rewrite method on interfaces | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} | | ... | ${tag_rewrite} -| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | And Configure L2XC | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} +| | And Configure L2XC | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot index 079cd59cb4..f1c3b9a034 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot @@ -81,7 +81,7 @@ | | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid} | | And Configure L2 tag rewrite method on interfaces | | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite} -| | And Connect interfaces and VLAN sub-interfaces using L2XC +| | And Configure L2XC | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | Then Find NDR and PDR intervals using optimized search -- 2.16.6