From b0aa215df352276c6aed3663dce947ed68749bb1 Mon Sep 17 00:00:00 2001 From: Peter Ginchev Date: Wed, 11 Apr 2018 10:27:45 +0300 Subject: [PATCH] VTS VXLAN vhost-user with single DUT, TG sends VXLAN Change-Id: I63539af2cdbdbd02a67068e48d0fdf2743da3b1e Signed-off-by: Peter Ginchev --- .../performance/performance_configuration.robot | 69 +++++ .../robot/performance/performance_setup.robot | 25 ++ .../trex/trex-sl-ethip4-vxlansrc253.py | 134 +++++++++ ...h-iacldstbase-2vhostvr1024-1vm-ndrpdrdisc.robot | 329 +++++++++++++++++++++ 4 files changed, 557 insertions(+) create mode 100644 resources/traffic_profiles/trex/trex-sl-ethip4-vxlansrc253.py create mode 100644 tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-2vhostvr1024-1vm-ndrpdrdisc.robot diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index c2f591ad0c..21826a2160 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -1482,6 +1482,75 @@ | | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} | | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} +| Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology +| | [Documentation] +| | ... | Create two Vhost-User interfaces on one VPP node. Add each +| | ... | Vhost-User interface into L2 bridge domains with learning enabled +| | ... | one connected to physical interface, the other to VXLAN. +| | ... | Setup VXLANoIPv4 between DUTs and TG by connecting physical and vxlan +| | ... | interfaces on the DUT. All interfaces are brought up. +| | ... | IPv4 addresses with prefix /24 are configured on interfaces between +| | ... | DUT and TG. +| | ... +| | ... | *Arguments:* +| | ... | - dut1_address - Address of physical interface on DUT1. Type: string +| | ... | - dut1_address_subnet - Subnet of the address of physical interface on +| | ... | DUT1. Type: string +| | ... | - dut2_address - Address of physical interface on DUT2. Type: string +| | ... | - dut2_address_subnet - Subnet of the address of physical interface on +| | ... | DUT2. Type: string +| | ... | - dut1_gw - Address of the _gateway_ to which the traffic will be +| | ... | forwarded on DUT1. Type: string +| | ... | - dut2_gw - Address of the _gateway_ to which the traffic will be +| | ... | forwarded on DUT2. Type: string +| | ... | - dut1_vxlans - List of VXLAN params to be configured on DUT1. +| | ... | Type: list of dicts, dict params vni, vtep +| | ... | - dut2_vxlans - List of VXLAN params to be configured on DUT2. +| | ... | Type: list of dicts, dict params vni, vtep +| | ... | - dut1_route_subnet - Subnet address to forward to _gateway_ on DUT1. +| | ... | Type: string +| | ... | - dut1_route_mask - Subnet address mask to forward to _gateway_ +| | ... | on DUT1. Type: string +| | ... | - dut2_route_subnet - Subnet address to forward to _gateway_ on DUT2. +| | ... | Type: string +| | ... | - dut2_route_mask - Subnet address mask to forward to _gateway_ +| | ... | on DUT2. Type: string +| | ... +| | ... | *Example:* +| | ... +| | [Arguments] | ${dut1_address} | ${dut1_address_subnet} | +| | ... | ${dut2_address} | ${dut2_address_subnet} | ${dut1_gw} | ${dut2_gw} | +| | ... | ${dut1_vxlans} | ${dut2_vxlans} | ${dut1_route_subnet} | +| | ... | ${dut1_route_mask} | ${dut2_route_subnet} | ${dut2_route_mask} +| | ... +| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | +| | ... | ${dut1_address} | ${dut1_address_subnet} +| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2} | +| | ... | ${dut2_address} | ${dut2_address_subnet} +| | ${dut1_bd_id1}= | Set Variable | 1 +| | ${dut1_bd_id2}= | Set Variable | 2 +| | ${dut2_bd_id1}= | Set Variable | 1 +| | :FOR | ${vxlan} | IN | @{dut1_vxlans} +| | | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | ${vxlan.vni} +| | | ... | ${dut1_address} | ${vxlan.vtep} +| | | Add interface to bridge domain | ${dut1} | ${dut1s_vxlan} | ${dut1_bd_id1} +| | :FOR | ${vxlan} | IN | @{dut2_vxlans} +| | | ${dut2s_vxlan}= | Create VXLAN interface | ${dut2} | ${vxlan.vni} +| | | ... | ${dut2_address} | ${vxlan.vtep} +| | | Add interface to bridge domain | ${dut2} | ${dut2s_vxlan} | ${dut2_bd_id1} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Add arp on dut | ${dut1} | ${dut1_if1} | ${dut1_gw} | ${tg_if1_mac} +| | Add arp on dut | ${dut2} | ${dut2_if2} | ${dut2_gw} | ${tg_if2_mac} +| | Vpp Route Add | ${dut1} | ${dut1_route_subnet} | ${dut1_route_mask} +| | ... | ${dut1_gw} | ${dut1_if1} +| | Vpp Route Add | ${dut2} | ${dut2_route_subnet} | ${dut2_route_mask} +| | ... | ${dut2_gw} | ${dut2_if2} +| | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${dut1_bd_id2} +| | Add interface to bridge domain | ${dut2} | ${dut2_if1} | ${dut2_bd_id1} +| | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${dut1_bd_id1} +| | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${dut1_bd_id2} + | Initialize L2 bridge domains with Vhost-User in 2-node circular topology | | [Documentation] | | ... | Create two Vhost-User interfaces on all defined VPP nodes. Add each diff --git a/resources/libraries/robot/performance/performance_setup.robot b/resources/libraries/robot/performance/performance_setup.robot index f4e07b1103..adcdb2173d 100644 --- a/resources/libraries/robot/performance/performance_setup.robot +++ b/resources/libraries/robot/performance/performance_setup.robot @@ -636,6 +636,31 @@ | | Run keyword unless | ${dut2_node}==${None} | | ... | Tear down guest VM with dpdk-testpmd | ${dut2} | ${dut2_vm_refs} +| Tear down performance test with vhost and VM with dpdk-testpmd and ACL +| | [Documentation] | Common test teardown for performance tests which use +| | ... | vhost(s) and VM(s) with ACL and dpdk-testpmd. +| | ... +| | ... | *Arguments:* +| | ... | - rate - Rate for sending packets. Type: string +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - topology_type - Topology type. Type: string +| | ... | - dut1_node - Node where to clean qemu. Type: dictionary +| | ... | - dut1_vm_refs - VM references on node. Type: dictionary +| | ... | - dut2_node - Node where to clean qemu. Type: dictionary +| | ... | - dut2_vm_refs - VM references on node. Type: dictionary +| | ... +| | [Arguments] | ${rate} | ${framesize} | ${topology_type} +| | ... | ${dut1_node}=${None} | ${dut1_vm_refs}=${None} +| | ... | ${dut2_node}=${None} | ${dut2_vm_refs}=${None} +| | ... +| | Tear down performance test with vhost and VM with dpdk-testpmd +| | ... | ${rate} | ${framesize} | ${topology_type} +| | ... | ${dut1_node} | ${dut1_vm_refs} +| | ... | ${dut2_node} | ${dut2_vm_refs} +| | Vpp Log Plugin Acl Settings | ${dut1} +| | Run Keyword If Test Failed | Run Keyword And Ignore Error +| | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1} + | Tear down performance pdrchk test with vhost and VM with dpdk-testpmd | | [Documentation] | Common test teardown for performance pdrchk tests which \ | | ... | use vhost(s) and VM(s) with dpdk-testpmd. diff --git a/resources/traffic_profiles/trex/trex-sl-ethip4-vxlansrc253.py b/resources/traffic_profiles/trex/trex-sl-ethip4-vxlansrc253.py new file mode 100644 index 0000000000..1018c13c53 --- /dev/null +++ b/resources/traffic_profiles/trex/trex-sl-ethip4-vxlansrc253.py @@ -0,0 +1,134 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Stream profile for T-rex traffic generator. + +Stream profile: + - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. + - Packet: ETH / IP / VXLAN / ETH / IP + - Direction 0 --> 1: + - Source IP address: 172.17.0.2 + - Destination IP address: 172.16.0.1 + - VXLAN VNI: 24 + - Payload source MAC address: 00:de:ad:00:00:00 + - Payload source IP address: 10.0.0.2 + - Payload destination MAC address: 00:de:ad:00:00:01 + - Payload destination IP address: 10.0.0.1 + - Direction 1 --> 0: + - Source IP address: 172.27.0.2 + - Destination IP address: 172.26.0.1 + - VXLAN VNI: 24 + - Payload source MAC address: 00:de:ad:00:00:01 + - Payload source IP address: 10.0.0.1 + - Payload destination MAC address: 00:de:ad:00:00:00 + - Payload destination IP address: 10.0.0.2 + +""" + +from trex_stl_lib.api import * +from profile_trex_stateless_base_class import TrafficStreamsBaseClass + +# RFC 7348 - Virtual eXtensible Local Area Network (VXLAN): +# A Framework for Overlaying Virtualized Layer 2 Networks over Layer 3 Networks +# http://tools.ietf.org/html/rfc7348 +_VXLAN_FLAGS = list('R'*24 + "RRRIRRRRR") + + +class VXLAN(Packet): + name = "VXLAN" + fields_desc = [FlagsField("flags", 0x08000000, 32, _VXLAN_FLAGS), + ThreeBytesField("vni", 0), + XByteField("reserved", 0x00)] + + def mysummary(self): + return self.sprintf("VXLAN (vni=%VXLAN.vni%)") + + +bind_layers(UDP, VXLAN, dport=4789) +bind_layers(VXLAN, Ether) + + +class TrafficStreams(TrafficStreamsBaseClass): + """Stream profile.""" + + def __init__(self): + """Initialization and setting of streams' parameters.""" + + super(TrafficStreamsBaseClass, self).__init__() + + def define_packets(self): + """Defines the packets to be sent from the traffic generator. + + Packet definition: | ETH | IP | + + :returns: Packets to be sent from the traffic generator. + :rtype: tuple + """ + + # Direction 0 --> 1 + base_pkt_a = ( + Ether()/ + IP(src="172.17.0.2",dst="172.16.0.1")/ + UDP(sport=1337,dport=4789)/ + VXLAN(vni=24)/ + Ether(src="00:de:ad:00:00:00",dst="00:de:ad:00:00:01")/ + IP(src="10.0.0.2",dst="10.0.0.1")) + + # Direction 1 --> 0 + base_pkt_b = ( + Ether()/ + IP(src="172.27.0.2",dst="172.26.0.1")/ + UDP(sport=1337,dport=4789)/ + VXLAN(vni=24)/ + Ether(src="00:de:ad:00:00:01",dst="00:de:ad:00:00:00")/ + IP(src="10.0.0.1",dst="10.0.0.2")) + + + # Direction 0 --> 1 + vm1 = STLScVmRaw([ + STLVmFlowVar(name="src", min_value="172.17.0.2" , + max_value="172.17.0.254", size=4, op="inc"), + STLVmFlowVar(name="src_mac", min_value=2 , max_value=3100, + size=2, op="inc"), + STLVmWrFlowVar(fv_name="src", pkt_offset="IP.src"), + STLVmWrFlowVar(fv_name="src_mac", pkt_offset=60), + STLVmFixIpv4(offset = "IP") + ]) + + # Direction 1 --> 0 + vm2 = STLScVmRaw([ + STLVmFlowVar(name="src", min_value="172.27.0.2" , + max_value="172.27.0.254", size=4, op="inc"), + STLVmFlowVar(name="src_mac", min_value=2 , max_value=3100, + size=2, op="inc"), + STLVmWrFlowVar(fv_name="src", pkt_offset="IP.src"), + STLVmWrFlowVar(fv_name="src_mac", pkt_offset=60), + STLVmFixIpv4(offset = "IP") + ]) + + # for now there's a single VXLAN tunnel per direction, the above + # variations are for reference only + vm1, vm2 = [], [] + + return base_pkt_a, base_pkt_b, vm1, vm2 + +def register(): + """Register this traffic profile to T-rex. + + Do not change this function. + + :return: Traffic streams. + :rtype: Object + """ + return TrafficStreams() + diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-2vhostvr1024-1vm-ndrpdrdisc.robot new file mode 100644 index 0000000000..95cbbdfb4d --- /dev/null +++ b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -0,0 +1,329 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Library | resources.libraries.python.QemuUtils +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC +| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY +| ... | VHOST | VM | VHOST_1024 | VTS +| ... +| Suite Setup | Run Keywords +| ... | Set up 3-node performance topology with DUT's NIC model +| ... | L3 | Intel-X520-DA2 +| ... | AND | Set up performance test suite with ACL +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost and VM with dpdk-testpmd and ACL +| ... | ${min_rate}pps | ${framesize} | ${traffic_profile} +| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} +| ... +| Documentation | *RFC2544: Packet throughput L2BD test cases with VXLANoIPv4 +| ... | and vhost* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge- +| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via +| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting +| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M +| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores +| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to +| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 +| ... | Niantic by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using either binary search or linear search +| ... | algorithms with configured starting rate and final step that determines +| ... | throughput measurement resolution. Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. + +*** Variables *** +| ${perf_qemu_qsz}= | 1024 +# X520-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +| ${vxlan_overhead}= | ${50} +# Socket names +| ${dut1_bd_id1}= | 1 +| ${dut1_bd_id2}= | 2 +| ${dut2_bd_id1}= | 1 +| ${sock1}= | /tmp/sock-1-${dut1_bd_id1} +| ${sock2}= | /tmp/sock-1-${dut1_bd_id2} +# Traffic profile: +| ${traffic_profile} | trex-sl-ethip4-vxlansrc253 +| ${min_rate}= | ${10000} + + +*** Keywords *** +| Configure ACLs on a single interface +| | [Documentation] +| | ... | Configure ACL +| | ... +| | ... | *Arguments:* +| | ... | - dut - DUT node. Type: string +| | ... | - dut_if - DUT node interface name. Type: string +| | ... | - acl_apply_type - To what path apply the ACL - input or output. +| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect. +| | ... | - subnets - Subnets to apply the specific ACL. Type: list +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Configure ACLs on a single interface \| ${nodes['DUT1']} +| | ... | \| ... \| GigabitEthernet0/7/0 \| input \| permit | 0.0.0.0/0 +| | ... +| | [Arguments] | ${dut} | ${dut_if} | ${acl_apply_type} | ${acl_action} +| | ... | @{subnets} +| | Set Test variable | ${acl} | ${EMPTY} +| | :FOR | ${subnet} | IN | @{subnets} +| | | ${acl}= | Run Keyword If | '${acl}' == '${EMPTY}' +| | | ... | Set Variable | ipv4 ${acl_action} src ${subnet} +| | | ... | ELSE +| | | ... | Catenate | SEPARATOR=, | ${acl} +| | | ... | ipv4 ${acl_action} src ${subnet} +| | Add Replace Acl Multi Entries | ${dut} | rules=${acl} +| | @{acl_list}= | Create List | ${0} +| | Set Acl List For Interface | ${dut} | ${dut_if} | ${acl_apply_type} +| | ... | ${acl_list} + + +*** Keywords *** +| Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | [Arguments] | ${num_of_threads} | ${rxq} | ${pkt_framesize} | ${search_type} +| | ... | ${acl_type}=${EMPTY} +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. +| | ... +| | ... | *Arguments:* +| | ... | - num_of_threads - Number of worker threads to be used. Type: integer +| | ... | - rxq - Number of Rx queues to be used. Type: integer +| | ... | - pkt_framesize - L2 Frame Size [B]. Type: integer +| | ... | - search_type - Type of the search - non drop rate (NDR) or partial +| | ... | drop rare (PDR). Type: string +| | ... +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${max_pkt_size}= | Set Variable If | '${pkt_framesize}' == 'IMIX_v4_1' | +| | ... | ${1500 + ${vxlan_overhead}} | ${pkt_framesize + ${vxlan_overhead}} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${max_pkt_size} +| | ${binary_max}= | Set Variable | ${max_rate} +| | Given Add '${num_of_threads}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Add PCI devices to DUTs in 3-node single link topology +| | And Run Keyword If | ${max_pkt_size} < ${1522} +| | ... | Add no multi seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | &{vxlan1}= | Create Dictionary | vni=24 | vtep=172.17.0.2 +| | &{vxlan2}= | Create Dictionary | vni=24 | vtep=172.27.0.2 +| | @{dut1_vxlans}= | Create List | ${vxlan1} +| | @{dut2_vxlans}= | Create List | ${vxlan2} +| | ${jumbo_frames}= | Set Variable If +| | ... | ${max_pkt_size} < ${1522} | ${False} | ${True} +| | Set interfaces in path in 3-node circular topology up +| | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | ... | ${sock1} | ${sock2} +| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology +| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2 +| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16 +| | @{permit_list}= | Create List | 10.0.0.1/32 | 10.0.0.2/32 +| | Run Keyword If | '${acl_type}' != '${EMPTY}' +| | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input +| | ... | ${acl_type} | @{permit_list} +| | ${vm1}= | And Configure guest VM with dpdk-testpmd connected via vhost-user +| | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM1 +| | ... | jumbo_frames=${jumbo_frames} +| | Set Test Variable | &{dut1_vm_refs} | DUT1_VM1=${vm1} +| | Set Test Variable | ${framesize} | ${pkt_framesize} +| | ${pkt_framesize}= | Set Variable If | '${pkt_framesize}' == 'IMIX_v4_1' | +| | ... | ${pkt_framesize} | ${pkt_framesize + ${vxlan_overhead}} +| | Run Keyword If | '${search_type}' == 'NDR' +| | ... | Find NDR using binary search and pps +| | ... | ${pkt_framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ELSE IF | '${search_type}' == 'PDR' +| | ... | Find PDR using binary search and pps +| | ... | ${pkt_framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +*** Test Cases *** +| tc01-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc +| | [Tags] | 64B | 2T2C | STHREAD | NDRDISC +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=${64} | search_type=NDR + +| tc02-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-pdrdisc +| | [Tags] | 64B | 2T2C | STHREAD | PDRDISC +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=${64} | search_type=PDR + +| tc03-150B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc +| | [Tags] | 150B | 2T2C | STHREAD | NDRDISC +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=${150} | search_type=NDR + +| tc04-150B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-pdrdisc +| | [Tags] | 150B | 2T2C | STHREAD | PDRDISC +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=${150} | search_type=PDR + +| tc05-200B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc +| | [Tags] | 200B | 2T2C | STHREAD | NDRDISC +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=${200} | search_type=NDR + +| tc06-200B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-pdrdisc +| | [Tags] | 200B | 2T2C | STHREAD | PDRDISC +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=${200} | search_type=PDR + +| tc07-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc +| | [Tags] | IMIX | 2T2C | STHREAD | NDRDISC +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=IMIX_v4_1 | search_type=NDR + +| tc08-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-pdrdisc +| | [Tags] | IMIX | 2T2C | STHREAD | PDRDISC +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=IMIX_v4_1 | search_type=PDR + +| tc09-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-ndrdisc +| | [Tags] | 64B | 2T2C | STHREAD | NDRDISC | ACL_PERMIT +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=${64} | search_type=NDR +| | ... | acl_type=permit + +| tc10-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-pdrdisc +| | [Tags] | 64B | 2T2C | STHREAD | PDRDISC | ACL_PERMIT +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=${64} | search_type=PDR +| | ... | acl_type=permit + +| tc11-150B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-ndrdisc +| | [Tags] | 150B | 2T2C | STHREAD | NDRDISC | ACL_PERMIT +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=${150} | search_type=NDR +| | ... | acl_type=permit + +| tc12-150B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-pdrdisc +| | [Tags] | 150B | 2T2C | STHREAD | PDRDISC | ACL_PERMIT +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=${150} | search_type=PDR +| | ... | acl_type=permit + +| tc13-200B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-ndrdisc +| | [Tags] | 200B | 2T2C | STHREAD | NDRDISC | ACL_PERMIT +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=${200} | search_type=NDR +| | ... | acl_type=permit + +| tc14-200B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-pdrdisc +| | [Tags] | 200B | 2T2C | STHREAD | PDRDISC | ACL_PERMIT +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=${200} | search_type=PDR +| | ... | acl_type=permit + +| tc15-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-ndrdisc +| | [Tags] | IMIX | 2T2C | STHREAD | NDRDISC | ACL_PERMIT +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=IMIX_v4_1 | search_type=NDR +| | ... | acl_type=permit + +| tc16-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-pdrdisc +| | [Tags] | IMIX | 2T2C | STHREAD | PDRDISC | ACL_PERMIT +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=IMIX_v4_1 | search_type=PDR +| | ... | acl_type=permit + +| tc17-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-ndrdisc +| | [Tags] | 64B | 2T2C | STHREAD | NDRDISC | ACL_PERMIT_REFLECT +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=${64} | search_type=NDR +| | ... | acl_type=permit+reflect + +| tc18-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-pdrdisc +| | [Tags] | 64B | 2T2C | STHREAD | PDRDISC | ACL_PERMIT_REFLECT +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=${64} | search_type=PDR +| | ... | acl_type=permit+reflect + +| tc19-150B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-ndrdisc +| | [Tags] | 150B | 2T2C | STHREAD | NDRDISC | ACL_PERMIT_REFLECT +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=${150} | search_type=NDR +| | ... | acl_type=permit+reflect + +| tc20-150B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-pdrdisc +| | [Tags] | 150B | 2T2C | STHREAD | PDRDISC | ACL_PERMIT_REFLECT +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=${150} | search_type=PDR +| | ... | acl_type=permit+reflect + +| tc21-200B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-ndrdisc +| | [Tags] | 200B | 2T2C | STHREAD | NDRDISC | ACL_PERMIT_REFLECT +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=${200} | search_type=NDR +| | ... | acl_type=permit+reflect + +| tc22-200B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-pdrdisc +| | [Tags] | 200B | 2T2C | STHREAD | PDRDISC | ACL_PERMIT_REFLECT +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=${200} | search_type=PDR +| | ... | acl_type=permit+reflect + +| tc23-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-ndrdisc +| | [Tags] | IMIX | 2T2C | STHREAD | NDRDISC | ACL_PERMIT_REFLECT +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=IMIX_v4_1 | search_type=NDR +| | ... | acl_type=permit+reflect + +| tc24-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-pdrdisc +| | [Tags] | IMIX | 2T2C | STHREAD | PDRDISC | ACL_PERMIT_REFLECT +| | ... +| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL +| | num_of_threads=2 | rxq=2 | pkt_framesize=IMIX_v4_1 | search_type=PDR +| | ... | acl_type=permit+reflect -- 2.16.6