/*- * BSD LICENSE * * Copyright(c) 2010-2016 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name of Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "l3fwd.h" /* * Configurable number of RX/TX ring descriptors */ #define RTE_TEST_RX_DESC_DEFAULT 128 #define RTE_TEST_TX_DESC_DEFAULT 512 #define MAX_TX_QUEUE_PER_PORT RTE_MAX_ETHPORTS #define MAX_RX_QUEUE_PER_PORT 128 #define MAX_LCORE_PARAMS 1024 /* Static global variables used within this file. */ static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT; static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT; /**< Ports set in promiscuous mode off by default. */ static int promiscuous_on; /* Select Longest-Prefix or Exact match. */ static int l3fwd_lpm_on; static int l3fwd_em_on; static int numa_on = 1; /**< NUMA is enabled by default. */ static int parse_ptype; /**< Parse packet type using rx callback, and */ /**< disabled by default */ /* Global variables. */ volatile bool force_quit; /* ethernet addresses of ports */ uint64_t dest_eth_addr[RTE_MAX_ETHPORTS]; struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS]; xmm_t val_eth[RTE_MAX_ETHPORTS]; /* mask of enabled ports */ uint32_t enabled_port_mask; /* Used only in exact match mode. */ int ipv6; /**< ipv6 is false by default. */ uint32_t hash_entry_number = HASH_ENTRY_NUMBER_DEFAULT; struct lcore_conf lcore_conf[RTE_MAX_LCORE]; struct lcore_params { uint8_t port_id; uint8_t queue_id; uint8_t lcore_id; } __rte_cache_aligned; static struct lcore_params lcore_params_array[MAX_LCORE_PARAMS]; static struct lcore_params lcore_params_array_default[] = { {0, 0, 2}, {0, 1, 2}, {0, 2, 2}, {1, 0, 2}, {1, 1, 2}, {1, 2, 2}, {2, 0, 2}, {3, 0, 3}, {3, 1, 3}, }; static struct lcore_params * lcore_params = lcore_params_array_default; static uint16_t nb_lcore_params = sizeof(lcore_params_array_default) / sizeof(lcore_params_array_default[0]); static struct rte_eth_conf port_conf = { .rxmode = { .mq_mode = ETH_MQ_RX_RSS, .max_rx_pkt_len = ETHER_MAX_LEN, .split_hdr_size = 0, .header_split = 0, /**< Header Split disabled */ .hw_ip_checksum = 1, /**< IP checksum offload enabled */ .hw_vlan_filter = 0, /**< VLAN filtering disabled */ .jumbo_frame = 0, /**< Jumbo Frame Support disabled */ .hw_strip_crc = 0, /**< CRC stripped by hardware */ }, .rx_adv_conf = { .rss_conf = { .rss_key = NULL, .rss_hf = ETH_RSS_IP, }, }, .txmode = { .mq_mode = ETH_MQ_TX_NONE, }, }; static struct rte_mempool * pktmbuf_pool[NB_SOCKETS]; struct l3fwd_lkp_mode { void (*setup)(int); int (*check_ptype)(int); rte_rx_callback_fn cb_parse_ptype; int (*main_loop)(void *); void* (*get_ipv4_lookup_struct)(int); void* (*get_ipv6_lookup_struct)(int); }; static struct l3fwd_lkp_mode l3fwd_lkp; static struct l3fwd_lkp_mode l3fwd_em_lkp = { .setup = setup_hash, .check_ptype = em_check_ptype, .cb_parse_ptype = em_cb_parse_ptype, .main_loop = em_main_loop, .get_ipv4_lookup_struct = em_get_ipv4_l3fwd_lookup_struct, .get_ipv6_lookup_struct = em_get_ipv6_l3fwd_lookup_struct, }; static struct l3fwd_lkp_mode l3fwd_lpm_lkp = { .setup = setup_lpm, .check_ptype = lpm_check_ptype, .cb_parse_ptype = lpm_cb_parse_ptype, .main_loop = lpm_main_loop, .get_ipv4_lookup_struct = lpm_get_ipv4_l3fwd_lookup_struct, .get_ipv6_lookup_struct = lpm_get_ipv6_l3fwd_lookup_struct, }; /* * Setup lookup methods for forwarding. * Currently exact-match and longest-prefix-match * are supported ones. */ static void setup_l3fwd_lookup_tables(void) { /* Setup HASH lookup functions. */ if (l3fwd_em_on) l3fwd_lkp = l3fwd_em_lkp; /* Setup LPM lookup functions. */ else l3fwd_lkp = l3fwd_lpm_lkp; } static int check_lcore_params(void) { uint8_t queue, lcore; uint16_t i; int socketid; for (i = 0; i < nb_lcore_params; ++i) { queue = lcore_params[i].queue_id; if (queue >= MAX_RX_QUEUE_PER_PORT) { printf("invalid queue number: %hhu\n", queue); return -1; } lcore = lcore_params[i].lcore_id; if (!rte_lcore_is_enabled(lcore)) { printf("error: lcore %hhu is not enabled in lcore mask\n", lcore); return -1; } if ((socketid = rte_lcore_to_socket_id(lcore) != 0) && (numa_on == 0)) { printf("warning: lcore %hhu is on socket %d with numa off \n", lcore, socketid); } } return 0; } static int check_port_config(const unsigned nb_ports) { unsigned portid; uint16_t i; for (i = 0; i < nb_lcore_params; ++i) { portid = lcore_params[i].port_id; if ((enabled_port_mask & (1 << portid)) == 0) { printf("port %u is not enabled in port mask\n", portid); return -1; } if (portid >= nb_ports) { printf("port %u is not present on the board\n", portid); return -1; } } return 0; } static uint8_t get_port_n_rx_queues(const uint8_t port) { int queue = -1; uint16_t i; for (i = 0; i < nb_lcore_params; ++i) { if (lcore_params[i].port_id == port) { if (lcore_params[i].queue_id == queue+1) queue = lcore_params[i].queue_id; else rte_exit(EXIT_FAILURE, "queue ids of the port %d must be" " in sequence and must start with 0\n", lcore_params[i].port_id); } } return (uint8_t)(++queue); } static int init_lcore_rx_queues(void) { uint16_t i, nb_rx_queue; uint8_t lcore; for (i = 0; i < nb_lcore_params; ++i) { lcore = lcore_params[i].lcore_id; nb_rx_queue = lcore_conf[lcore].n_rx_queue; if (nb_rx_queue >= MAX_RX_QUEUE_PER_LCORE) { printf("error: too many queues (%u) for lcore: %u\n", (unsigned)nb_rx_queue + 1, (unsigned)lcore); return -1; } else { lcore_conf[lcore].rx_queue_list[nb_rx_queue].port_id = lcore_params[i].port_id; lcore_conf[lcore].rx_queue_list[nb_rx_queue].queue_id = lcore_params[i].queue_id; lcore_conf[lcore].n_rx_queue++; } } return 0; } /* display usage */ static void print_usage(const char *prgname) { printf ("%s [EAL options] -- -p PORTMASK -P" " [--config (port,queue,lcore)[,(port,queue,lcore]]" " [--enable-jumbo [--max-pkt-len PKTLEN]]\n" " -p PORTMASK: hexadecimal bitmask of ports to configure\n" " -P : enable promiscuous mode\n" " -E : enable exact match\n" " -L : enable longest prefix match\n" " --config (port,queue,lcore): rx queues configuration\n" " --eth-dest=X,MM:MM:MM:MM:MM:MM: optional, ethernet destination for port X\n" " --no-numa: optional, disable numa awareness\n" " --ipv6: optional, specify it if running ipv6 packets\n" " --enable-jumbo: enable jumbo frame" " which max packet len is PKTLEN in decimal (64-9600)\n" " --hash-entry-num: specify the hash entry number in hexadecimal to be setup\n", prgname); } static int parse_max_pkt_len(const char *pktlen) { char *end = NULL; unsigned long len; /* parse decimal string */ len = strtoul(pktlen, &end, 10); if ((pktlen[0] == '\0') || (end == NULL) || (*end != '\0')) return -1; if (len == 0) return -1; return len; } static int parse_portmask(const char *portmask) { char *end = NULL; unsigned long pm; /* parse hexadecimal string */ pm = strtoul(portmask, &end, 16); if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0')) return -1; if (pm == 0) return -1; return pm; } static int parse_hash_entry_number(const char *hash_entry_num) { char *end = NULL; unsigned long hash_en; /* parse hexadecimal string */ hash_en = strtoul(hash_entry_num, &end, 16); if ((hash_entry_num[0] == '\0') || (end == NULL) || (*end != '\0')) return -1; if (hash_en == 0) return -1; return hash_en; } static int parse_config(const char *q_arg) { char s[256]; const char *p, *p0 = q_arg; char *end; enum fieldnames { FLD_PORT = 0, FLD_QUEUE, FLD_LCORE, _NUM_FLD }; unsigned long int_fld[_NUM_FLD]; char *str_fld[_NUM_FLD]; int i; unsigned size; nb_lcore_params = 0; while ((p = strchr(p0,'(')) != NULL) { ++p; if((p0 = strchr(p,')')) == NULL) return -1; size = p0 - p; if(size >= sizeof(s)) return -1; snprintf(s, sizeof(s), "%.*s", size, p); if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD) return -1; for (i = 0; i < _NUM_FLD; i++){ errno = 0; int_fld[i] = strtoul(str_fld[i], &end, 0); if (errno != 0 || end == str_fld[i] || int_fld[i] > 255) return -1; } if (nb_lcore_params >= MAX_LCORE_PARAMS) { printf("exceeded max number of lcore params: %hu\n", nb_lcore_params); return -1; } lcore_params_array[nb_lcore_params].port_id = (uint8_t)int_fld[FLD_PORT]; lcore_params_array[nb_lcore_params].queue_id = (uint8_t)int_fld[FLD_QUEUE]; lcore_params_array[nb_lcore_params].lcore_id = (uint8_t)int_fld[FLD_LCORE]; ++nb_lcore_params; } lcore_params = lcore_params_array; return 0; } static void parse_eth_dest(const char *optarg) { uint8_t portid; char *port_end; uint8_t c, *dest, peer_addr[6]; errno = 0; portid = strtoul(optarg, &port_end, 10); if (errno != 0 || port_end == optarg || *port_end++ != ',') rte_exit(EXIT_FAILURE, "Invalid eth-dest: %s", optarg); if (portid >= RTE_MAX_ETHPORTS) rte_exit(EXIT_FAILURE, "eth-dest: port %d >= RTE_MAX_ETHPORTS(%d)\n", portid, RTE_MAX_ETHPORTS); if (cmdline_parse_etheraddr(NULL, port_end, &peer_addr, sizeof(peer_addr)) < 0) rte_exit(EXIT_FAILURE, "Invalid ethernet address: %s\n", port_end); dest = (uint8_t *)&dest_eth_addr[portid]; for (c = 0; c < 6; c++) dest[c] = peer_addr[c]; *(uint64_t *)(val_eth + portid) = dest_eth_addr[portid]; } #define MAX_JUMBO_PKT_LEN 9600 #define MEMPOOL_CACHE_SIZE 256 #define CMD_LINE_OPT_CONFIG "config" #define CMD_LINE_OPT_ETH_DEST "eth-dest" #define CMD_LINE_OPT_NO_NUMA "no-numa" #define CMD_LINE_OPT_IPV6 "ipv6" #define CMD_LINE_OPT_ENABLE_JUMBO "enable-jumbo" #define CMD_LINE_OPT_HASH_ENTRY_NUM "hash-entry-num" #define CMD_LINE_OPT_PARSE_PTYPE "parse-ptype" /* * This expression is used to calculate the number of mbufs needed * depending on user input, taking into account memory for rx and * tx hardware rings, cache per lcore and mtable per port per lcore. * RTE_MAX is used to ensure that NB_MBUF never goes below a minimum * value of 8192 */ #define NB_MBUF RTE_MAX( \ (nb_ports*nb_rx_queue*RTE_TEST_RX_DESC_DEFAULT + \ nb_ports*nb_lcores*MAX_PKT_BURST + \ nb_ports*n_tx_queue*RTE_TEST_TX_DESC_DEFAULT + \ nb_lcores*MEMPOOL_CACHE_SIZE), \ (unsigned)8192) /* Parse the argument given in the command line of the application */ static int parse_args(int argc, char **argv) { int opt, ret; char **argvopt; int option_index; char *prgname = argv[0]; static struct option lgopts[] = { {CMD_LINE_OPT_CONFIG, 1, 0, 0}, {CMD_LINE_OPT_ETH_DEST, 1, 0, 0}, {CMD_LINE_OPT_NO_NUMA, 0, 0, 0}, {CMD_LINE_OPT_IPV6, 0, 0, 0}, {CMD_LINE_OPT_ENABLE_JUMBO, 0, 0, 0}, {CMD_LINE_OPT_HASH_ENTRY_NUM, 1, 0, 0}, {CMD_LINE_OPT_PARSE_PTYPE, 0, 0, 0}, {NULL, 0, 0, 0} }; argvopt = argv; /* Error or normal output strings. */ const char *str1 = "L3FWD: Invalid portmask"; const char *str2 = "L3FWD: Promiscuous mode selected"; const char *str3 = "L3FWD: Exact match selected"; const char *str4 = "L3FWD: Longest-prefix match selected"; const char *str5 = "L3FWD: Invalid config"; const char *str6 = "L3FWD: NUMA is disabled"; const char *str7 = "L3FWD: IPV6 is specified"; const char *str8 = "L3FWD: Jumbo frame is enabled - disabling simple TX path"; const char *str9 = "L3FWD: Invalid packet length"; const char *str10 = "L3FWD: Set jumbo frame max packet len to "; const char *str11 = "L3FWD: Invalid hash entry number"; const char *str12 = "L3FWD: LPM and EM are mutually exclusive, select only one"; const char *str13 = "L3FWD: LPM or EM none selected, default LPM on"; while ((opt = getopt_long(argc, argvopt, "p:PLE", lgopts, &option_index)) != EOF) { switch (opt) { /* portmask */ case 'p': enabled_port_mask = parse_portmask(optarg); if (enabled_port_mask == 0) { printf("%s\n", str1); print_usage(prgname); return -1; } break; case 'P': printf("%s\n", str2); promiscuous_on = 1; break; case 'E': printf("%s\n", str3); l3fwd_em_on = 1; break; case 'L': printf("%s\n", str4); l3fwd_lpm_on = 1; break; /* long options */ case 0: if (!strncmp(lgopts[option_index].name, CMD_LINE_OPT_CONFIG, sizeof(CMD_LINE_OPT_CONFIG))) { ret = parse_config(optarg); if (ret) { printf("%s\n", str5); print_usage(prgname); return -1; } } if (!strncmp(lgopts[option_index].name, CMD_LINE_OPT_ETH_DEST, sizeof(CMD_LINE_OPT_ETH_DEST))) { parse_eth_dest(optarg); } if (!strncmp(lgopts[option_index].name, CMD_LINE_OPT_NO_NUMA, sizeof(CMD_LINE_OPT_NO_NUMA))) { printf("%s\n", str6); numa_on = 0; } if (!strncmp(lgopts[option_index].name, CMD_LINE_OPT_IPV6, sizeof(CMD_LINE_OPT_IPV6))) { printf("%sn", str7); ipv6 = 1; } if (!strncmp(lgopts[option_index].name, CMD_LINE_OPT_ENABLE_JUMBO, sizeof(CMD_LINE_OPT_ENABLE_JUMBO))) { struct option lenopts = { "max-pkt-len", required_argument, 0, 0 }; printf("%s\n", str8); port_conf.rxmode.jumbo_frame = 1; /* * if no max-pkt-len set, use the default * value ETHER_MAX_LEN. */ if (0 == getopt_long(argc, argvopt, "", &lenopts, &option_index)) { ret = parse_max_pkt_len(optarg); if ((ret < 64) || (ret > MAX_JUMBO_PKT_LEN)) { printf("%s\n", str9); print_usage(prgname); return -1; } port_conf.rxmode.max_rx_pkt_len = ret; } printf("%s %u\n", str10, (unsigned int)port_conf.rxmode.max_rx_pkt_len); } if (!strncmp(lgopts[option_index].name, CMD_LINE_OPT_HASH_ENTRY_NUM, sizeof(CMD_LINE_OPT_HASH_ENTRY_NUM))) { ret = parse_hash_entry_number(optarg); if ((ret > 0) && (ret <= L3FWD_HASH_ENTRIES)) { hash_entry_number = ret; } else { printf("%s\n", str11); print_usage(prgname); return -1; } } if (!strncmp(lgopts[option_index].name, CMD_LINE_OPT_PARSE_PTYPE, sizeof(CMD_LINE_OPT_PARSE_PTYPE))) { printf("soft parse-ptype is enabled\n"); parse_ptype = 1; } break; default: print_usage(prgname); return -1; } } /* If both LPM and EM are selected, return error. */ if (l3fwd_lpm_on && l3fwd_em_on) { printf("%s\n", str12); return -1; } /* * Nothing is selected, pick longest-prefix match * as default match. */ if (!l3fwd_lpm_on && !l3fwd_em_on) { l3fwd_lpm_on = 1; printf("%s\n", str13); } /* * ipv6 and hash flags are valid only for * exact macth, reset them to default for * longest-prefix match. */ if (l3fwd_lpm_on) { ipv6 = 0; hash_entry_number = HASH_ENTRY_NUMBER_DEFAULT; } if (optind >= 0) argv[optind-1] = prgname; ret = optind-1; optind = 0; /* reset getopt lib */ return ret; } static void print_ethaddr(const char *name, const struct ether_addr *eth_addr) { char buf[ETHER_ADDR_FMT_SIZE]; ether_format_addr(buf, ETHER_ADDR_FMT_SIZE, eth_addr); printf("%s%s", name, buf); } static int init_mem(unsigned nb_mbuf) { struct lcore_conf *qconf; int socketid; unsigned lcore_id; char s[64]; for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) { if (rte_lcore_is_enabled(lcore_id) == 0) continue; if (numa_on) socketid = rte_lcore_to_socket_id(lcore_id); else socketid = 0; if (socketid >= NB_SOCKETS) { rte_exit(EXIT_FAILURE, "Socket %d of lcore %u is out of range %d\n", socketid, lcore_id, NB_SOCKETS); } if (pktmbuf_pool[socketid] == NULL) { snprintf(s, sizeof(s), "mbuf_pool_%d", socketid); pktmbuf_pool[socketid] = rte_pktmbuf_pool_create(s, nb_mbuf, MEMPOOL_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE, socketid); if (pktmbuf_pool[socketid] == NULL) rte_exit(EXIT_FAILURE, "Cannot init mbuf pool on socket %d\n", socketid); else printf("Allocated mbuf pool on socket %d\n", socketid); /* Setup either LPM or EM(f.e Hash). */ l3fwd_lkp.setup(socketid); } qconf = &lcore_conf[lcore_id]; qconf->ipv4_lookup_struct = l3fwd_lkp.get_ipv4_lookup_struct(socketid); qconf->ipv6_lookup_struct = l3fwd_lkp.get_ipv6_lookup_struct(socketid); } return 0; } /* Check the link status of all ports in up to 9s, and print them finally */ static void check_all_ports_link_status(uint8_t port_num, uint32_t port_mask) { #define CHECK_INTERVAL 100 /* 100ms */ #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */ uint8_t portid, count, all_ports_up, print_flag = 0; struct rte_eth_link link; printf("\nChecking link status"); fflush(stdout); for (count = 0; count <= MAX_CHECK_TIME; count++) { if (force_quit) return; all_ports_up = 1; for (portid = 0; portid < port_num; portid++) { if (force_quit) return; if ((port_mask & (1 << portid)) == 0) continue; memset(&link, 0, sizeof(link)); rte_eth_link_get_nowait(portid, &link); /* print link status if flag set */ if (print_flag == 1) { if (link.link_status) printf("Port %d Link Up - speed %u " "Mbps - %s\n", (uint8_t)portid, (unsigned)link.link_speed, (link.link_duplex == ETH_LINK_FULL_DUPLEX) ? ("full-duplex") : ("half-duplex\n")); else printf("Port %d Link Down\n", (uint8_t)portid); continue; } /* clear all_ports_up flag if any link down */ if (link.link_status == ETH_LINK_DOWN) { all_ports_up = 0; break; } } /* after finally printing all link status, get out */ if (print_flag == 1) break; if (all_ports_up == 0) { printf("."); fflush(stdout); rte_delay_ms(CHECK_INTERVAL); } /* set the print_flag if all ports up or timeout */ if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) { print_flag = 1; printf("done\n"); } } } static void signal_handler(int signum) { if (signum == SIGINT || signum == SIGTERM) { printf("\n\nSignal %d received, preparing to exit...\n", signum); force_quit = true; } } static int prepare_ptype_parser(uint8_t portid, uint16_t queueid) { if (parse_ptype) { printf("Port %d: softly parse packet type info\n", portid); if (rte_eth_add_rx_callback(portid, queueid, l3fwd_lkp.cb_parse_ptype, NULL)) return 1; printf("Failed to add rx callback: port=%d\n", portid); return 0; } if (l3fwd_lkp.check_ptype(portid)) return 1; printf("port %d cannot parse packet type, please add --%s\n", portid, CMD_LINE_OPT_PARSE_PTYPE); return 0; } int main(int argc, char **argv) { struct lcore_conf *qconf; struct rte_eth_dev_info dev_info; struct rte_eth_txconf *txconf; int ret; unsigned nb_ports; uint16_t queueid; unsigned lcore_id; uint32_t n_tx_queue, nb_lcores; uint8_t portid, nb_rx_queue, queue, socketid; /* init EAL */ ret = rte_eal_init(argc, argv); if (ret < 0) rte_exit(EXIT_FAILURE, "Invalid EAL parameters\n"); argc -= ret; argv += ret; force_quit = false; signal(SIGINT, signal_handler); signal(SIGTERM, signal_handler); /* pre-init dst MACs for all ports to 02:00:00:00:00:xx */ for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) { dest_eth_addr[portid] = ETHER_LOCAL_ADMIN_ADDR + ((uint64_t)portid << 40); *(uint64_t *)(val_eth + portid) = dest_eth_addr[portid]; } /* parse application arguments (after the EAL ones) */ ret = parse_args(argc, argv); if (ret < 0) rte_exit(EXIT_FAILURE, "Invalid L3FWD parameters\n"); if (check_lcore_params() < 0) rte_exit(EXIT_FAILURE, "check_lcore_params failed\n"); ret = init_lcore_rx_queues(); if (ret < 0) rte_exit(EXIT_FAILURE, "init_lcore_rx_queues failed\n"); nb_ports = rte_eth_dev_count(); if (nb_ports > RTE_MAX_ETHPORTS) nb_ports = RTE_MAX_ETHPORTS; if (check_port_config(nb_ports) < 0) rte_exit(EXIT_FAILURE, "check_port_config failed\n"); nb_lcores = rte_lcore_count(); /* Setup function pointers for lookup method. */ setup_l3fwd_lookup_tables(); /* initialize all ports */ for (portid = 0; portid < nb_ports; portid++) { /* skip ports that are not enabled */ if ((enabled_port_mask & (1 << portid)) == 0) { printf("\nSkipping disabled port %d\n", portid); continue; } /* init port */ printf("Initializing port %d ... ", portid ); fflush(stdout); nb_rx_queue = get_port_n_rx_queues(portid); n_tx_queue = nb_lcores; if (n_tx_queue > MAX_TX_QUEUE_PER_PORT) n_tx_queue = MAX_TX_QUEUE_PER_PORT; printf("Creating queues: nb_rxq=%d nb_txq=%u... ", nb_rx_queue, (unsigned)n_tx_queue ); ret = rte_eth_dev_configure(portid, nb_rx_queue, (uint16_t)n_tx_queue, &port_conf); if (ret < 0) rte_exit(EXIT_FAILURE, "Cannot configure device: err=%d, port=%d\n", ret, portid); rte_eth_macaddr_get(portid, &ports_eth_addr[portid]); print_ethaddr(" Address:", &ports_eth_addr[portid]); printf(", "); print_ethaddr("Destination:", (const struct ether_addr *)&dest_eth_addr[portid]); printf(", "); /* * prepare src MACs for each port. */ ether_addr_copy(&ports_eth_addr[portid], (struct ether_addr *)(val_eth + portid) + 1); /* init memory */ ret = init_mem(NB_MBUF); if (ret < 0) rte_exit(EXIT_FAILURE, "init_mem failed\n"); /* init one TX queue per couple (lcore,port) */ queueid = 0; for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) { if (rte_lcore_is_enabled(lcore_id) == 0) continue; if (numa_on) socketid = (uint8_t)rte_lcore_to_socket_id(lcore_id); else socketid = 0; printf("txq=%u,%d,%d ", lcore_id, queueid, socketid); fflush(stdout); rte_eth_dev_info_get(portid, &dev_info); txconf = &dev_info.default_txconf; if (port_conf.rxmode.jumbo_frame) txconf->txq_flags = 0; ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd, socketid, txconf); if (ret < 0) rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, " "port=%d\n", ret, portid); qconf = &lcore_conf[lcore_id]; qconf->tx_queue_id[portid] = queueid; queueid++; qconf->tx_port_id[qconf->n_tx_port] = portid; qconf->n_tx_port++; } printf("\n"); } for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) { if (rte_lcore_is_enabled(lcore_id) == 0) continue; qconf = &lcore_conf[lcore_id]; printf("\nInitializing rx queues on lcore %u ... ", lcore_id ); fflush(stdout); /* init RX queues */ for(queue = 0; queue < qconf->n_rx_queue; ++queue) { portid = qconf->rx_queue_list[queue].port_id; queueid = qconf->rx_queue_list[queue].queue_id; if (numa_on) socketid = (uint8_t)rte_lcore_to_socket_id(lcore_id); else socketid = 0; printf("rxq=%d,%d,%d ", portid, queueid, socketid); fflush(stdout); ret = rte_eth_rx_queue_setup(portid, queueid, nb_rxd, socketid, NULL, pktmbuf_pool[socketid]); if (ret < 0) rte_exit(EXIT_FAILURE, "rte_eth_rx_queue_setup: err=%d, port=%d\n", ret, portid); } } printf("\n"); /* start ports */ for (portid = 0; portid < nb_ports; portid++) { if ((enabled_port_mask & (1 << portid)) == 0) { continue; } /* Start device */ ret = rte_eth_dev_start(portid); if (ret < 0) rte_exit(EXIT_FAILURE, "rte_eth_dev_start: err=%d, port=%d\n", ret, portid); /* * If enabled, put device in promiscuous mode. * This allows IO forwarding mode to forward packets * to itself through 2 cross-connected ports of the * target machine. */ if (promiscuous_on) rte_eth_promiscuous_enable(portid); } printf("\n"); for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) { if (rte_lcore_is_enabled(lcore_id) == 0) continue; qconf = &lcore_conf[lcore_id]; for (queue = 0; queue < qconf->n_rx_queue; ++queue) { portid = qconf->rx_queue_list[queue].port_id; queueid = qconf->rx_queue_list[queue].queue_id; if (prepare_ptype_parser(portid, queueid) == 0) rte_exit(EXIT_FAILURE, "ptype check fails\n"); } } check_all_ports_link_status((uint8_t)nb_ports, enabled_port_mask); ret = 0; /* launch per-lcore init on every lcore */ rte_eal_mp_remote_launch(l3fwd_lkp.main_loop, NULL, CALL_MASTER); RTE_LCORE_FOREACH_SLAVE(lcore_id) { if (rte_eal_wait_lcore(lcore_id) < 0) { ret = -1; break; } } /* stop ports */ for (portid = 0; portid < nb_ports; portid++) { if ((enabled_port_mask & (1 << portid)) == 0) continue; printf("Closing port %d...", portid); rte_eth_dev_stop(portid); rte_eth_dev_close(portid); printf(" Done\n"); } printf("Bye...\n"); return ret; }