--- /dev/null
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_malloc.h>
+
+#include "cperf_test_common.h"
+
+struct obj_params {
+ uint32_t src_buf_offset;
+ uint32_t dst_buf_offset;
+ uint16_t segment_sz;
+ uint16_t segments_nb;
+};
+
+static void
+fill_single_seg_mbuf(struct rte_mbuf *m, struct rte_mempool *mp,
+ void *obj, uint32_t mbuf_offset, uint16_t segment_sz)
+{
+ uint32_t mbuf_hdr_size = sizeof(struct rte_mbuf);
+
+ /* start of buffer is after mbuf structure and priv data */
+ m->priv_size = 0;
+ m->buf_addr = (char *)m + mbuf_hdr_size;
+ m->buf_iova = rte_mempool_virt2iova(obj) +
+ mbuf_offset + mbuf_hdr_size;
+ m->buf_len = segment_sz;
+ m->data_len = segment_sz;
+
+ /* No headroom needed for the buffer */
+ m->data_off = 0;
+
+ /* init some constant fields */
+ m->pool = mp;
+ m->nb_segs = 1;
+ m->port = 0xff;
+ rte_mbuf_refcnt_set(m, 1);
+ m->next = NULL;
+}
+
+static void
+fill_multi_seg_mbuf(struct rte_mbuf *m, struct rte_mempool *mp,
+ void *obj, uint32_t mbuf_offset, uint16_t segment_sz,
+ uint16_t segments_nb)
+{
+ uint16_t mbuf_hdr_size = sizeof(struct rte_mbuf);
+ uint16_t remaining_segments = segments_nb;
+ struct rte_mbuf *next_mbuf;
+ rte_iova_t next_seg_phys_addr = rte_mempool_virt2iova(obj) +
+ mbuf_offset + mbuf_hdr_size;
+
+ do {
+ /* start of buffer is after mbuf structure and priv data */
+ m->priv_size = 0;
+ m->buf_addr = (char *)m + mbuf_hdr_size;
+ m->buf_iova = next_seg_phys_addr;
+ next_seg_phys_addr += mbuf_hdr_size + segment_sz;
+ m->buf_len = segment_sz;
+ m->data_len = segment_sz;
+
+ /* No headroom needed for the buffer */
+ m->data_off = 0;
+
+ /* init some constant fields */
+ m->pool = mp;
+ m->nb_segs = segments_nb;
+ m->port = 0xff;
+ rte_mbuf_refcnt_set(m, 1);
+ next_mbuf = (struct rte_mbuf *) ((uint8_t *) m +
+ mbuf_hdr_size + segment_sz);
+ m->next = next_mbuf;
+ m = next_mbuf;
+ remaining_segments--;
+
+ } while (remaining_segments > 0);
+
+ m->next = NULL;
+}
+
+static void
+mempool_obj_init(struct rte_mempool *mp,
+ void *opaque_arg,
+ void *obj,
+ __attribute__((unused)) unsigned int i)
+{
+ struct obj_params *params = opaque_arg;
+ struct rte_crypto_op *op = obj;
+ struct rte_mbuf *m = (struct rte_mbuf *) ((uint8_t *) obj +
+ params->src_buf_offset);
+ /* Set crypto operation */
+ op->type = RTE_CRYPTO_OP_TYPE_SYMMETRIC;
+ op->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
+ op->sess_type = RTE_CRYPTO_OP_WITH_SESSION;
+ op->phys_addr = rte_mem_virt2phy(obj);
+ op->mempool = mp;
+
+ /* Set source buffer */
+ op->sym->m_src = m;
+ if (params->segments_nb == 1)
+ fill_single_seg_mbuf(m, mp, obj, params->src_buf_offset,
+ params->segment_sz);
+ else
+ fill_multi_seg_mbuf(m, mp, obj, params->src_buf_offset,
+ params->segment_sz, params->segments_nb);
+
+
+ /* Set destination buffer */
+ if (params->dst_buf_offset) {
+ m = (struct rte_mbuf *) ((uint8_t *) obj +
+ params->dst_buf_offset);
+ fill_single_seg_mbuf(m, mp, obj, params->dst_buf_offset,
+ params->segment_sz);
+ op->sym->m_dst = m;
+ } else
+ op->sym->m_dst = NULL;
+}
+
+int
+cperf_alloc_common_memory(const struct cperf_options *options,
+ const struct cperf_test_vector *test_vector,
+ uint8_t dev_id, uint16_t qp_id,
+ size_t extra_op_priv_size,
+ uint32_t *src_buf_offset,
+ uint32_t *dst_buf_offset,
+ struct rte_mempool **pool)
+{
+ char pool_name[32] = "";
+ int ret;
+
+ /* Calculate the object size */
+ uint16_t crypto_op_size = sizeof(struct rte_crypto_op) +
+ sizeof(struct rte_crypto_sym_op);
+ uint16_t crypto_op_private_size;
+ /*
+ * If doing AES-CCM, IV field needs to be 16 bytes long,
+ * and AAD field needs to be long enough to have 18 bytes,
+ * plus the length of the AAD, and all rounded to a
+ * multiple of 16 bytes.
+ */
+ if (options->aead_algo == RTE_CRYPTO_AEAD_AES_CCM) {
+ crypto_op_private_size = extra_op_priv_size +
+ test_vector->cipher_iv.length +
+ test_vector->auth_iv.length +
+ RTE_ALIGN_CEIL(test_vector->aead_iv.length, 16) +
+ RTE_ALIGN_CEIL(options->aead_aad_sz + 18, 16);
+ } else {
+ crypto_op_private_size = extra_op_priv_size +
+ test_vector->cipher_iv.length +
+ test_vector->auth_iv.length +
+ test_vector->aead_iv.length +
+ options->aead_aad_sz;
+ }
+
+ uint16_t crypto_op_total_size = crypto_op_size +
+ crypto_op_private_size;
+ uint16_t crypto_op_total_size_padded =
+ RTE_CACHE_LINE_ROUNDUP(crypto_op_total_size);
+ uint32_t mbuf_size = sizeof(struct rte_mbuf) + options->segment_sz;
+ uint32_t max_size = options->max_buffer_size + options->digest_sz;
+ uint16_t segments_nb = (max_size % options->segment_sz) ?
+ (max_size / options->segment_sz) + 1 :
+ max_size / options->segment_sz;
+ uint32_t obj_size = crypto_op_total_size_padded +
+ (mbuf_size * segments_nb);
+
+ snprintf(pool_name, sizeof(pool_name), "pool_cdev_%u_qp_%u",
+ dev_id, qp_id);
+
+ *src_buf_offset = crypto_op_total_size_padded;
+
+ struct obj_params params = {
+ .segment_sz = options->segment_sz,
+ .segments_nb = segments_nb,
+ .src_buf_offset = crypto_op_total_size_padded,
+ .dst_buf_offset = 0
+ };
+
+ if (options->out_of_place) {
+ *dst_buf_offset = *src_buf_offset +
+ (mbuf_size * segments_nb);
+ params.dst_buf_offset = *dst_buf_offset;
+ /* Destination buffer will be one segment only */
+ obj_size += max_size;
+ }
+
+ *pool = rte_mempool_create_empty(pool_name,
+ options->pool_sz, obj_size, 512, 0,
+ rte_socket_id(), 0);
+ if (*pool == NULL) {
+ RTE_LOG(ERR, USER1,
+ "Cannot allocate mempool for device %u\n",
+ dev_id);
+ return -1;
+ }
+
+ ret = rte_mempool_set_ops_byname(*pool,
+ RTE_MBUF_DEFAULT_MEMPOOL_OPS, NULL);
+ if (ret != 0) {
+ RTE_LOG(ERR, USER1,
+ "Error setting mempool handler for device %u\n",
+ dev_id);
+ return -1;
+ }
+
+ ret = rte_mempool_populate_default(*pool);
+ if (ret < 0) {
+ RTE_LOG(ERR, USER1,
+ "Error populating mempool for device %u\n",
+ dev_id);
+ return -1;
+ }
+
+ rte_mempool_obj_iter(*pool, mempool_obj_init, (void *)¶ms);
+
+ return 0;
+}
Code Review / deb_dpdk.git / blobdiff