Imported Upstream version 17.05
[deb_dpdk.git] / app / test-crypto-perf / cperf_test_verify.c
diff --git a/app/test-crypto-perf/cperf_test_verify.c b/app/test-crypto-perf/cperf_test_verify.c
new file mode 100644 (file)
index 0000000..454221e
--- /dev/null
@@ -0,0 +1,579 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_malloc.h>
+#include <rte_cycles.h>
+#include <rte_crypto.h>
+#include <rte_cryptodev.h>
+
+#include "cperf_test_verify.h"
+#include "cperf_ops.h"
+
+struct cperf_verify_ctx {
+       uint8_t dev_id;
+       uint16_t qp_id;
+       uint8_t lcore_id;
+
+       struct rte_mempool *pkt_mbuf_pool_in;
+       struct rte_mempool *pkt_mbuf_pool_out;
+       struct rte_mbuf **mbufs_in;
+       struct rte_mbuf **mbufs_out;
+
+       struct rte_mempool *crypto_op_pool;
+
+       struct rte_cryptodev_sym_session *sess;
+
+       cperf_populate_ops_t populate_ops;
+
+       const struct cperf_options *options;
+       const struct cperf_test_vector *test_vector;
+};
+
+struct cperf_op_result {
+       enum rte_crypto_op_status status;
+};
+
+static void
+cperf_verify_test_free(struct cperf_verify_ctx *ctx, uint32_t mbuf_nb)
+{
+       uint32_t i;
+
+       if (ctx) {
+               if (ctx->sess)
+                       rte_cryptodev_sym_session_free(ctx->dev_id, ctx->sess);
+
+               if (ctx->mbufs_in) {
+                       for (i = 0; i < mbuf_nb; i++)
+                               rte_pktmbuf_free(ctx->mbufs_in[i]);
+
+                       rte_free(ctx->mbufs_in);
+               }
+
+               if (ctx->mbufs_out) {
+                       for (i = 0; i < mbuf_nb; i++) {
+                               if (ctx->mbufs_out[i] != NULL)
+                                       rte_pktmbuf_free(ctx->mbufs_out[i]);
+                       }
+
+                       rte_free(ctx->mbufs_out);
+               }
+
+               if (ctx->pkt_mbuf_pool_in)
+                       rte_mempool_free(ctx->pkt_mbuf_pool_in);
+
+               if (ctx->pkt_mbuf_pool_out)
+                       rte_mempool_free(ctx->pkt_mbuf_pool_out);
+
+               if (ctx->crypto_op_pool)
+                       rte_mempool_free(ctx->crypto_op_pool);
+
+               rte_free(ctx);
+       }
+}
+
+static struct rte_mbuf *
+cperf_mbuf_create(struct rte_mempool *mempool,
+               uint32_t segments_nb,
+               const struct cperf_options *options,
+               const struct cperf_test_vector *test_vector)
+{
+       struct rte_mbuf *mbuf;
+       uint32_t segment_sz = options->max_buffer_size / segments_nb;
+       uint32_t last_sz = options->max_buffer_size % segments_nb;
+       uint8_t *mbuf_data;
+       uint8_t *test_data =
+                       (options->cipher_op == RTE_CRYPTO_CIPHER_OP_ENCRYPT) ?
+                                       test_vector->plaintext.data :
+                                       test_vector->ciphertext.data;
+
+       mbuf = rte_pktmbuf_alloc(mempool);
+       if (mbuf == NULL)
+               goto error;
+
+       mbuf_data = (uint8_t *)rte_pktmbuf_append(mbuf, segment_sz);
+       if (mbuf_data == NULL)
+               goto error;
+
+       memcpy(mbuf_data, test_data, segment_sz);
+       test_data += segment_sz;
+       segments_nb--;
+
+       while (segments_nb) {
+               struct rte_mbuf *m;
+
+               m = rte_pktmbuf_alloc(mempool);
+               if (m == NULL)
+                       goto error;
+
+               rte_pktmbuf_chain(mbuf, m);
+
+               mbuf_data = (uint8_t *)rte_pktmbuf_append(mbuf, segment_sz);
+               if (mbuf_data == NULL)
+                       goto error;
+
+               memcpy(mbuf_data, test_data, segment_sz);
+               test_data += segment_sz;
+               segments_nb--;
+       }
+
+       if (last_sz) {
+               mbuf_data = (uint8_t *)rte_pktmbuf_append(mbuf, last_sz);
+               if (mbuf_data == NULL)
+                       goto error;
+
+               memcpy(mbuf_data, test_data, last_sz);
+       }
+
+       if (options->op_type != CPERF_CIPHER_ONLY) {
+               mbuf_data = (uint8_t *)rte_pktmbuf_append(mbuf,
+                               options->auth_digest_sz);
+               if (mbuf_data == NULL)
+                       goto error;
+       }
+
+       if (options->op_type == CPERF_AEAD) {
+               uint8_t *aead = (uint8_t *)rte_pktmbuf_prepend(mbuf,
+                       RTE_ALIGN_CEIL(options->auth_aad_sz, 16));
+
+               if (aead == NULL)
+                       goto error;
+
+               memcpy(aead, test_vector->aad.data, test_vector->aad.length);
+       }
+
+       return mbuf;
+error:
+       if (mbuf != NULL)
+               rte_pktmbuf_free(mbuf);
+
+       return NULL;
+}
+
+void *
+cperf_verify_test_constructor(uint8_t dev_id, uint16_t qp_id,
+               const struct cperf_options *options,
+               const struct cperf_test_vector *test_vector,
+               const struct cperf_op_fns *op_fns)
+{
+       struct cperf_verify_ctx *ctx = NULL;
+       unsigned int mbuf_idx = 0;
+       char pool_name[32] = "";
+
+       ctx = rte_malloc(NULL, sizeof(struct cperf_verify_ctx), 0);
+       if (ctx == NULL)
+               goto err;
+
+       ctx->dev_id = dev_id;
+       ctx->qp_id = qp_id;
+
+       ctx->populate_ops = op_fns->populate_ops;
+       ctx->options = options;
+       ctx->test_vector = test_vector;
+
+       ctx->sess = op_fns->sess_create(dev_id, options, test_vector);
+       if (ctx->sess == NULL)
+               goto err;
+
+       snprintf(pool_name, sizeof(pool_name), "cperf_pool_in_cdev_%d",
+                       dev_id);
+
+       ctx->pkt_mbuf_pool_in = rte_pktmbuf_pool_create(pool_name,
+                       options->pool_sz * options->segments_nb, 0, 0,
+                       RTE_PKTMBUF_HEADROOM +
+                       RTE_CACHE_LINE_ROUNDUP(
+                               (options->max_buffer_size / options->segments_nb) +
+                               (options->max_buffer_size % options->segments_nb) +
+                                       options->auth_digest_sz),
+                       rte_socket_id());
+
+       if (ctx->pkt_mbuf_pool_in == NULL)
+               goto err;
+
+       /* Generate mbufs_in with plaintext populated for test */
+       ctx->mbufs_in = rte_malloc(NULL,
+                       (sizeof(struct rte_mbuf *) * ctx->options->pool_sz), 0);
+
+       for (mbuf_idx = 0; mbuf_idx < options->pool_sz; mbuf_idx++) {
+               ctx->mbufs_in[mbuf_idx] = cperf_mbuf_create(
+                               ctx->pkt_mbuf_pool_in, options->segments_nb,
+                               options, test_vector);
+               if (ctx->mbufs_in[mbuf_idx] == NULL)
+                       goto err;
+       }
+
+       if (options->out_of_place == 1) {
+
+               snprintf(pool_name, sizeof(pool_name), "cperf_pool_out_cdev_%d",
+                               dev_id);
+
+               ctx->pkt_mbuf_pool_out = rte_pktmbuf_pool_create(
+                               pool_name, options->pool_sz, 0, 0,
+                               RTE_PKTMBUF_HEADROOM +
+                               RTE_CACHE_LINE_ROUNDUP(
+                                       options->max_buffer_size +
+                                       options->auth_digest_sz),
+                               rte_socket_id());
+
+               if (ctx->pkt_mbuf_pool_out == NULL)
+                       goto err;
+       }
+
+       ctx->mbufs_out = rte_malloc(NULL,
+                       (sizeof(struct rte_mbuf *) *
+                       ctx->options->pool_sz), 0);
+
+       for (mbuf_idx = 0; mbuf_idx < options->pool_sz; mbuf_idx++) {
+               if (options->out_of_place == 1) {
+                       ctx->mbufs_out[mbuf_idx] = cperf_mbuf_create(
+                                       ctx->pkt_mbuf_pool_out, 1,
+                                       options, test_vector);
+                       if (ctx->mbufs_out[mbuf_idx] == NULL)
+                               goto err;
+               } else {
+                       ctx->mbufs_out[mbuf_idx] = NULL;
+               }
+       }
+
+       snprintf(pool_name, sizeof(pool_name), "cperf_op_pool_cdev_%d",
+                       dev_id);
+
+       ctx->crypto_op_pool = rte_crypto_op_pool_create(pool_name,
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC, options->pool_sz, 0, 0,
+                       rte_socket_id());
+       if (ctx->crypto_op_pool == NULL)
+               goto err;
+
+       return ctx;
+err:
+       cperf_verify_test_free(ctx, mbuf_idx);
+
+       return NULL;
+}
+
+static int
+cperf_verify_op(struct rte_crypto_op *op,
+               const struct cperf_options *options,
+               const struct cperf_test_vector *vector)
+{
+       const struct rte_mbuf *m;
+       uint32_t len;
+       uint16_t nb_segs;
+       uint8_t *data;
+       uint32_t cipher_offset, auth_offset;
+       uint8_t cipher, auth;
+       int res = 0;
+
+       if (op->status != RTE_CRYPTO_OP_STATUS_SUCCESS)
+               return 1;
+
+       if (op->sym->m_dst)
+               m = op->sym->m_dst;
+       else
+               m = op->sym->m_src;
+       nb_segs = m->nb_segs;
+       len = 0;
+       while (m && nb_segs != 0) {
+               len += m->data_len;
+               m = m->next;
+               nb_segs--;
+       }
+
+       data = rte_malloc(NULL, len, 0);
+       if (data == NULL)
+               return 1;
+
+       if (op->sym->m_dst)
+               m = op->sym->m_dst;
+       else
+               m = op->sym->m_src;
+       nb_segs = m->nb_segs;
+       len = 0;
+       while (m && nb_segs != 0) {
+               memcpy(data + len, rte_pktmbuf_mtod(m, uint8_t *),
+                               m->data_len);
+               len += m->data_len;
+               m = m->next;
+               nb_segs--;
+       }
+
+       switch (options->op_type) {
+       case CPERF_CIPHER_ONLY:
+               cipher = 1;
+               cipher_offset = 0;
+               auth = 0;
+               auth_offset = 0;
+               break;
+       case CPERF_CIPHER_THEN_AUTH:
+               cipher = 1;
+               cipher_offset = 0;
+               auth = 1;
+               auth_offset = options->test_buffer_size;
+               break;
+       case CPERF_AUTH_ONLY:
+               cipher = 0;
+               cipher_offset = 0;
+               auth = 1;
+               auth_offset = options->test_buffer_size;
+               break;
+       case CPERF_AUTH_THEN_CIPHER:
+               cipher = 1;
+               cipher_offset = 0;
+               auth = 1;
+               auth_offset = options->test_buffer_size;
+               break;
+       case CPERF_AEAD:
+               cipher = 1;
+               cipher_offset = vector->aad.length;
+               auth = 1;
+               auth_offset = vector->aad.length + options->test_buffer_size;
+               break;
+       }
+
+       if (cipher == 1) {
+               if (options->cipher_op == RTE_CRYPTO_CIPHER_OP_ENCRYPT)
+                       res += memcmp(data + cipher_offset,
+                                       vector->ciphertext.data,
+                                       options->test_buffer_size);
+               else
+                       res += memcmp(data + cipher_offset,
+                                       vector->plaintext.data,
+                                       options->test_buffer_size);
+       }
+
+       if (auth == 1) {
+               if (options->auth_op == RTE_CRYPTO_AUTH_OP_GENERATE)
+                       res += memcmp(data + auth_offset,
+                                       vector->digest.data,
+                                       options->auth_digest_sz);
+       }
+
+       return !!res;
+}
+
+int
+cperf_verify_test_runner(void *test_ctx)
+{
+       struct cperf_verify_ctx *ctx = test_ctx;
+
+       uint64_t ops_enqd = 0, ops_enqd_total = 0, ops_enqd_failed = 0;
+       uint64_t ops_deqd = 0, ops_deqd_total = 0, ops_deqd_failed = 0;
+       uint64_t ops_failed = 0;
+
+       static int only_once;
+
+       uint64_t i, m_idx = 0;
+       uint16_t ops_unused = 0;
+
+       struct rte_crypto_op *ops[ctx->options->max_burst_size];
+       struct rte_crypto_op *ops_processed[ctx->options->max_burst_size];
+
+       uint32_t lcore = rte_lcore_id();
+
+#ifdef CPERF_LINEARIZATION_ENABLE
+       struct rte_cryptodev_info dev_info;
+       int linearize = 0;
+
+       /* Check if source mbufs require coalescing */
+       if (ctx->options->segments_nb > 1) {
+               rte_cryptodev_info_get(ctx->dev_id, &dev_info);
+               if ((dev_info.feature_flags &
+                               RTE_CRYPTODEV_FF_MBUF_SCATTER_GATHER) == 0)
+                       linearize = 1;
+       }
+#endif /* CPERF_LINEARIZATION_ENABLE */
+
+       ctx->lcore_id = lcore;
+
+       if (!ctx->options->csv)
+               printf("\n# Running verify test on device: %u, lcore: %u\n",
+                       ctx->dev_id, lcore);
+
+       while (ops_enqd_total < ctx->options->total_ops) {
+
+               uint16_t burst_size = ((ops_enqd_total + ctx->options->max_burst_size)
+                               <= ctx->options->total_ops) ?
+                                               ctx->options->max_burst_size :
+                                               ctx->options->total_ops -
+                                               ops_enqd_total;
+
+               uint16_t ops_needed = burst_size - ops_unused;
+
+               /* Allocate crypto ops from pool */
+               if (ops_needed != rte_crypto_op_bulk_alloc(
+                               ctx->crypto_op_pool,
+                               RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+                               ops, ops_needed))
+                       return -1;
+
+               /* Setup crypto op, attach mbuf etc */
+               (ctx->populate_ops)(ops, &ctx->mbufs_in[m_idx],
+                               &ctx->mbufs_out[m_idx],
+                               ops_needed, ctx->sess, ctx->options,
+                               ctx->test_vector);
+
+#ifdef CPERF_LINEARIZATION_ENABLE
+               if (linearize) {
+                       /* PMD doesn't support scatter-gather and source buffer
+                        * is segmented.
+                        * We need to linearize it before enqueuing.
+                        */
+                       for (i = 0; i < burst_size; i++)
+                               rte_pktmbuf_linearize(ops[i]->sym->m_src);
+               }
+#endif /* CPERF_LINEARIZATION_ENABLE */
+
+               /* Enqueue burst of ops on crypto device */
+               ops_enqd = rte_cryptodev_enqueue_burst(ctx->dev_id, ctx->qp_id,
+                               ops, burst_size);
+               if (ops_enqd < burst_size)
+                       ops_enqd_failed++;
+
+               /**
+                * Calculate number of ops not enqueued (mainly for hw
+                * accelerators whose ingress queue can fill up).
+                */
+               ops_unused = burst_size - ops_enqd;
+               ops_enqd_total += ops_enqd;
+
+
+               /* Dequeue processed burst of ops from crypto device */
+               ops_deqd = rte_cryptodev_dequeue_burst(ctx->dev_id, ctx->qp_id,
+                               ops_processed, ctx->options->max_burst_size);
+
+               m_idx += ops_needed;
+               if (m_idx + ctx->options->max_burst_size > ctx->options->pool_sz)
+                       m_idx = 0;
+
+               if (ops_deqd == 0) {
+                       /**
+                        * Count dequeue polls which didn't return any
+                        * processed operations. This statistic is mainly
+                        * relevant to hw accelerators.
+                        */
+                       ops_deqd_failed++;
+                       continue;
+               }
+
+               for (i = 0; i < ops_deqd; i++) {
+                       if (cperf_verify_op(ops_processed[i], ctx->options,
+                                               ctx->test_vector))
+                               ops_failed++;
+                       /* free crypto ops so they can be reused. We don't free
+                        * the mbufs here as we don't want to reuse them as
+                        * the crypto operation will change the data and cause
+                        * failures.
+                        */
+                       rte_crypto_op_free(ops_processed[i]);
+               }
+               ops_deqd_total += ops_deqd;
+       }
+
+       /* Dequeue any operations still in the crypto device */
+
+       while (ops_deqd_total < ctx->options->total_ops) {
+               /* Sending 0 length burst to flush sw crypto device */
+               rte_cryptodev_enqueue_burst(ctx->dev_id, ctx->qp_id, NULL, 0);
+
+               /* dequeue burst */
+               ops_deqd = rte_cryptodev_dequeue_burst(ctx->dev_id, ctx->qp_id,
+                               ops_processed, ctx->options->max_burst_size);
+               if (ops_deqd == 0) {
+                       ops_deqd_failed++;
+                       continue;
+               }
+
+               for (i = 0; i < ops_deqd; i++) {
+                       if (cperf_verify_op(ops_processed[i], ctx->options,
+                                               ctx->test_vector))
+                               ops_failed++;
+                       /* free crypto ops so they can be reused. We don't free
+                        * the mbufs here as we don't want to reuse them as
+                        * the crypto operation will change the data and cause
+                        * failures.
+                        */
+                       rte_crypto_op_free(ops_processed[i]);
+               }
+               ops_deqd_total += ops_deqd;
+       }
+
+       if (!ctx->options->csv) {
+               if (!only_once)
+                       printf("%12s%12s%12s%12s%12s%12s%12s%12s\n\n",
+                               "lcore id", "Buf Size", "Burst size",
+                               "Enqueued", "Dequeued", "Failed Enq",
+                               "Failed Deq", "Failed Ops");
+               only_once = 1;
+
+               printf("%12u%12u%12u%12"PRIu64"%12"PRIu64"%12"PRIu64
+                               "%12"PRIu64"%12"PRIu64"\n",
+                               ctx->lcore_id,
+                               ctx->options->max_buffer_size,
+                               ctx->options->max_burst_size,
+                               ops_enqd_total,
+                               ops_deqd_total,
+                               ops_enqd_failed,
+                               ops_deqd_failed,
+                               ops_failed);
+       } else {
+               if (!only_once)
+                       printf("\n# lcore id, Buffer Size(B), "
+                               "Burst Size,Enqueued,Dequeued,Failed Enq,"
+                               "Failed Deq,Failed Ops\n");
+               only_once = 1;
+
+               printf("%10u;%10u;%u;%"PRIu64";%"PRIu64";%"PRIu64";%"PRIu64";"
+                               "%"PRIu64"\n",
+                               ctx->lcore_id,
+                               ctx->options->max_buffer_size,
+                               ctx->options->max_burst_size,
+                               ops_enqd_total,
+                               ops_deqd_total,
+                               ops_enqd_failed,
+                               ops_deqd_failed,
+                               ops_failed);
+       }
+
+       return 0;
+}
+
+
+
+void
+cperf_verify_test_destructor(void *arg)
+{
+       struct cperf_verify_ctx *ctx = arg;
+
+       if (ctx == NULL)
+               return;
+
+       cperf_verify_test_free(ctx, ctx->options->pool_sz);
+}