"--rss-ip | --rss-udp | "
"--rxpt= | --rxht= | --rxwt= | --rxfreet= | "
"--txpt= | --txht= | --txwt= | --txfreet= | "
- "--txrst= | --tx-offloads ]\n",
+ "--txrst= | --tx-offloads= | --vxlan-gpe-port= ]\n",
progname);
#ifdef RTE_LIBRTE_CMDLINE
printf(" --interactive: run in interactive mode.\n");
printf(" --flow-isolate-all: "
"requests flow API isolated mode on all ports at initialization time.\n");
printf(" --tx-offloads=0xXXXXXXXX: hexadecimal bitmask of TX queue offloads\n");
+ printf(" --hot-plug: enable hot plug for device.\n");
+ printf(" --vxlan-gpe-port=N: UPD port of tunnel VXLAN-GPE\n");
+ printf(" --mlockall: lock all memory\n");
+ printf(" --no-mlockall: do not lock all memory\n");
}
#ifdef RTE_LIBRTE_CMDLINE
};
unsigned long int_fld[_NUM_FLD];
char *str_fld[_NUM_FLD];
- portid_t pid;
/* reset from value set at definition */
while ((p = strchr(p0,'(')) != NULL) {
port_id = (portid_t)int_fld[FLD_PORT];
if (port_id_is_invalid(port_id, ENABLED_WARN) ||
port_id == (portid_t)RTE_PORT_ALL) {
- printf("Valid port range is [0");
- RTE_ETH_FOREACH_DEV(pid)
- printf(", %d", pid);
- printf("]\n");
+ print_valid_ports();
return -1;
}
socket_id = (uint8_t)int_fld[FLD_SOCKET];
};
unsigned long int_fld[_NUM_FLD];
char *str_fld[_NUM_FLD];
- portid_t pid;
#define RX_RING_ONLY 0x1
#define TX_RING_ONLY 0x2
#define RXTX_RING 0x3
port_id = (portid_t)int_fld[FLD_PORT];
if (port_id_is_invalid(port_id, ENABLED_WARN) ||
port_id == (portid_t)RTE_PORT_ALL) {
- printf("Valid port range is [0");
- RTE_ETH_FOREACH_DEV(pid)
- printf(", %d", pid);
- printf("]\n");
+ print_valid_ports();
return -1;
}
socket_id = (uint8_t)int_fld[FLD_SOCKET];
mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET;
else if (!strcmp(optarg, "vf_mbox"))
mask = UINT32_C(1) << RTE_ETH_EVENT_VF_MBOX;
+ else if (!strcmp(optarg, "ipsec"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_IPSEC;
else if (!strcmp(optarg, "macsec"))
mask = UINT32_C(1) << RTE_ETH_EVENT_MACSEC;
else if (!strcmp(optarg, "intr_rmv"))
/* Default offloads for all ports. */
uint64_t rx_offloads = rx_mode.offloads;
uint64_t tx_offloads = tx_mode.offloads;
+ struct rte_eth_dev_info dev_info;
+ uint16_t rec_nb_pkts;
static struct option lgopts[] = {
{ "help", 0, 0, 0 },
{ "print-event", 1, 0, 0 },
{ "mask-event", 1, 0, 0 },
{ "tx-offloads", 1, 0, 0 },
+ { "hot-plug", 0, 0, 0 },
+ { "vxlan-gpe-port", 1, 0, 0 },
+ { "mlockall", 0, 0, 0 },
+ { "no-mlockall", 0, 0, 0 },
{ 0, 0, 0, 0 },
};
if (!strcmp(lgopts[opt_idx].name, "cmdline-file")) {
printf("CLI commands to be read from %s\n",
optarg);
- snprintf(cmdline_filename,
- sizeof(cmdline_filename), "%s",
- optarg);
+ strlcpy(cmdline_filename, optarg,
+ sizeof(cmdline_filename));
}
if (!strcmp(lgopts[opt_idx].name, "auto-start")) {
printf("Auto-start selected\n");
" must be >= 0\n", n);
}
#endif
- if (!strcmp(lgopts[opt_idx].name, "disable-crc-strip"))
+ if (!strcmp(lgopts[opt_idx].name, "disable-crc-strip")) {
rx_offloads &= ~DEV_RX_OFFLOAD_CRC_STRIP;
+ rx_offloads |= DEV_RX_OFFLOAD_KEEP_CRC;
+ }
if (!strcmp(lgopts[opt_idx].name, "enable-lro"))
rx_offloads |= DEV_RX_OFFLOAD_TCP_LRO;
if (!strcmp(lgopts[opt_idx].name, "enable-scatter"))
}
if (!strcmp(lgopts[opt_idx].name, "burst")) {
n = atoi(optarg);
- if ((n >= 1) && (n <= MAX_PKT_BURST))
- nb_pkt_per_burst = (uint16_t) n;
- else
+ if (n == 0) {
+ /* A burst size of zero means that the
+ * PMD should be queried for
+ * recommended Rx burst size. Since
+ * testpmd uses a single size for all
+ * ports, port 0 is queried for the
+ * value, on the assumption that all
+ * ports are of the same NIC model.
+ */
+ rte_eth_dev_info_get(0, &dev_info);
+ rec_nb_pkts = dev_info
+ .default_rxportconf.burst_size;
+
+ if (rec_nb_pkts == 0)
+ rte_exit(EXIT_FAILURE,
+ "PMD does not recommend a burst size. "
+ "Provided value must be between "
+ "1 and %d\n", MAX_PKT_BURST);
+ else if (rec_nb_pkts > MAX_PKT_BURST)
+ rte_exit(EXIT_FAILURE,
+ "PMD recommended burst size of %d"
+ " exceeds maximum value of %d\n",
+ rec_nb_pkts, MAX_PKT_BURST);
+ printf("Using PMD-provided burst value of %d\n",
+ rec_nb_pkts);
+ nb_pkt_per_burst = rec_nb_pkts;
+ } else if (n > MAX_PKT_BURST)
rte_exit(EXIT_FAILURE,
- "burst must >= 1 and <= %d]",
- MAX_PKT_BURST);
+ "burst must be between1 and %d\n",
+ MAX_PKT_BURST);
+ else
+ nb_pkt_per_burst = (uint16_t) n;
}
if (!strcmp(lgopts[opt_idx].name, "mbcache")) {
n = atoi(optarg);
rte_exit(EXIT_FAILURE,
"tx-offloads must be >= 0\n");
}
+ if (!strcmp(lgopts[opt_idx].name, "vxlan-gpe-port")) {
+ n = atoi(optarg);
+ if (n >= 0)
+ vxlan_gpe_udp_port = (uint16_t)n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "vxlan-gpe-port must be >= 0\n");
+ }
if (!strcmp(lgopts[opt_idx].name, "print-event"))
if (parse_event_printing_config(optarg, 1)) {
rte_exit(EXIT_FAILURE,
rte_exit(EXIT_FAILURE,
"invalid mask-event argument\n");
}
-
+ if (!strcmp(lgopts[opt_idx].name, "hot-plug"))
+ hot_plug = 1;
+ if (!strcmp(lgopts[opt_idx].name, "mlockall"))
+ do_mlockall = 1;
+ if (!strcmp(lgopts[opt_idx].name, "no-mlockall"))
+ do_mlockall = 0;
break;
case 'h':
usage(argv[0]);
Code Review / deb_dpdk.git / blobdiff