-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2017 Intel Corporation
*/
#include <stdarg.h>
#include <rte_mempool.h>
#include <rte_malloc.h>
#include <rte_mbuf.h>
+#include <rte_mbuf_pool_ops.h>
#include <rte_interrupts.h>
#include <rte_pci.h>
#include <rte_ether.h>
#include "testpmd.h"
uint16_t verbose_level = 0; /**< Silent by default. */
+int testpmd_logtype; /**< Log type for testpmd logs */
/* use master core for command line ? */
uint8_t interactive = 0;
*/
uint8_t mp_anon = 0;
+/*
+ * Store specified sockets on which memory pool to be used by ports
+ * is allocated.
+ */
+uint8_t port_numa[RTE_MAX_ETHPORTS];
+
+/*
+ * Store specified sockets on which RX ring to be used by ports
+ * is allocated.
+ */
+uint8_t rxring_numa[RTE_MAX_ETHPORTS];
+
+/*
+ * Store specified sockets on which TX ring to be used by ports
+ * is allocated.
+ */
+uint8_t txring_numa[RTE_MAX_ETHPORTS];
+
/*
* Record the Ethernet address of peer target ports to which packets are
* forwarded.
/*
* Configurable number of RX/TX ring descriptors.
*/
-#define RTE_TEST_RX_DESC_DEFAULT 128
-#define RTE_TEST_TX_DESC_DEFAULT 512
+#define RTE_TEST_RX_DESC_DEFAULT 1024
+#define RTE_TEST_TX_DESC_DEFAULT 1024
uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT; /**< Number of RX descriptors. */
uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT; /**< Number of TX descriptors. */
*/
int16_t tx_rs_thresh = RTE_PMD_PARAM_UNSET;
-/*
- * Configurable value of TX queue flags.
- */
-int32_t txq_flags = RTE_PMD_PARAM_UNSET;
-
/*
* Receive Side Scaling (RSS) configuration.
*/
*/
struct rte_eth_rxmode rx_mode = {
.max_rx_pkt_len = ETHER_MAX_LEN, /**< Default maximum frame length. */
- .split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled. */
- .hw_ip_checksum = 0, /**< IP checksum offload disabled. */
- .hw_vlan_filter = 1, /**< VLAN filtering enabled. */
- .hw_vlan_strip = 1, /**< VLAN strip enabled. */
- .hw_vlan_extend = 0, /**< Extended VLAN disabled. */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled. */
- .hw_strip_crc = 1, /**< CRC stripping by hardware enabled. */
- .hw_timestamp = 0, /**< HW timestamp enabled. */
+ .offloads = DEV_RX_OFFLOAD_CRC_STRIP,
+ .ignore_offload_bitfield = 1,
+};
+
+struct rte_eth_txmode tx_mode = {
+ .offloads = DEV_TX_OFFLOAD_MBUF_FAST_FREE,
};
struct rte_fdir_conf fdir_conf = {
mb_size = sizeof(struct rte_mbuf) + mbuf_seg_size;
mbuf_poolname_build(socket_id, pool_name, sizeof(pool_name));
- RTE_LOG(INFO, USER1,
+ TESTPMD_LOG(INFO,
"create a new mbuf pool <%s>: n=%u, size=%u, socket=%u\n",
pool_name, nb_mbuf, mbuf_seg_size, socket_id);
rte_mempool_obj_iter(rte_mp, rte_pktmbuf_init, NULL);
} else {
/* wrapper to rte_mempool_create() */
+ TESTPMD_LOG(INFO, "preferred mempool ops selected: %s\n",
+ rte_mbuf_best_mempool_ops());
rte_mp = rte_pktmbuf_pool_create(pool_name, nb_mbuf,
mb_mempool_cache, 0, mbuf_seg_size, socket_id);
}
return 0;
}
+/*
+ * Get the allowed maximum number of RX queues.
+ * *pid return the port id which has minimal value of
+ * max_rx_queues in all ports.
+ */
+queueid_t
+get_allowed_max_nb_rxq(portid_t *pid)
+{
+ queueid_t allowed_max_rxq = MAX_QUEUE_ID;
+ portid_t pi;
+ struct rte_eth_dev_info dev_info;
+
+ RTE_ETH_FOREACH_DEV(pi) {
+ rte_eth_dev_info_get(pi, &dev_info);
+ if (dev_info.max_rx_queues < allowed_max_rxq) {
+ allowed_max_rxq = dev_info.max_rx_queues;
+ *pid = pi;
+ }
+ }
+ return allowed_max_rxq;
+}
+
+/*
+ * Check input rxq is valid or not.
+ * If input rxq is not greater than any of maximum number
+ * of RX queues of all ports, it is valid.
+ * if valid, return 0, else return -1
+ */
+int
+check_nb_rxq(queueid_t rxq)
+{
+ queueid_t allowed_max_rxq;
+ portid_t pid = 0;
+
+ allowed_max_rxq = get_allowed_max_nb_rxq(&pid);
+ if (rxq > allowed_max_rxq) {
+ printf("Fail: input rxq (%u) can't be greater "
+ "than max_rx_queues (%u) of port %u\n",
+ rxq,
+ allowed_max_rxq,
+ pid);
+ return -1;
+ }
+ return 0;
+}
+
+/*
+ * Get the allowed maximum number of TX queues.
+ * *pid return the port id which has minimal value of
+ * max_tx_queues in all ports.
+ */
+queueid_t
+get_allowed_max_nb_txq(portid_t *pid)
+{
+ queueid_t allowed_max_txq = MAX_QUEUE_ID;
+ portid_t pi;
+ struct rte_eth_dev_info dev_info;
+
+ RTE_ETH_FOREACH_DEV(pi) {
+ rte_eth_dev_info_get(pi, &dev_info);
+ if (dev_info.max_tx_queues < allowed_max_txq) {
+ allowed_max_txq = dev_info.max_tx_queues;
+ *pid = pi;
+ }
+ }
+ return allowed_max_txq;
+}
+
+/*
+ * Check input txq is valid or not.
+ * If input txq is not greater than any of maximum number
+ * of TX queues of all ports, it is valid.
+ * if valid, return 0, else return -1
+ */
+int
+check_nb_txq(queueid_t txq)
+{
+ queueid_t allowed_max_txq;
+ portid_t pid = 0;
+
+ allowed_max_txq = get_allowed_max_nb_txq(&pid);
+ if (txq > allowed_max_txq) {
+ printf("Fail: input txq (%u) can't be greater "
+ "than max_tx_queues (%u) of port %u\n",
+ txq,
+ allowed_max_txq,
+ pid);
+ return -1;
+ }
+ return 0;
+}
+
static void
init_config(void)
{
RTE_ETH_FOREACH_DEV(pid) {
port = &ports[pid];
+ /* Apply default TxRx configuration for all ports */
+ port->dev_conf.txmode = tx_mode;
+ port->dev_conf.rxmode = rx_mode;
rte_eth_dev_info_get(pid, &port->dev_info);
-
+ if (!(port->dev_info.tx_offload_capa &
+ DEV_TX_OFFLOAD_MBUF_FAST_FREE))
+ port->dev_conf.txmode.offloads &=
+ ~DEV_TX_OFFLOAD_MBUF_FAST_FREE;
if (numa_support) {
if (port_numa[pid] != NUMA_NO_CONFIG)
port_per_socket[port_numa[pid]]++;
return 1;
}
+int
+port_is_stopped(portid_t port_id)
+{
+ struct rte_port *port = &ports[port_id];
+
+ if ((port->port_status != RTE_PORT_STOPPED) &&
+ (port->slave_flag == 0))
+ return 0;
+ return 1;
+}
+
int
all_ports_stopped(void)
{
portid_t pi;
- struct rte_port *port;
RTE_ETH_FOREACH_DEV(pi) {
- port = &ports[pi];
- if ((port->port_status != RTE_PORT_STOPPED) &&
- (port->slave_flag == 0))
+ if (!port_is_stopped(pi))
return 0;
}
}
if (port->need_reconfig_queues > 0) {
port->need_reconfig_queues = 0;
+ port->tx_conf.txq_flags = ETH_TXQ_FLAGS_IGNORE;
+ /* Apply Tx offloads configuration */
+ port->tx_conf.offloads = port->dev_conf.txmode.offloads;
/* setup tx queues */
for (qi = 0; qi < nb_txq; qi++) {
if ((numa_support) &&
port->need_reconfig_queues = 1;
return -1;
}
+ /* Apply Rx offloads configuration */
+ port->rx_conf.offloads = port->dev_conf.rxmode.offloads;
/* setup rx queues */
for (qi = 0; qi < nb_rxq; qi++) {
if ((numa_support) &&
}
}
- for (event_type = RTE_ETH_EVENT_UNKNOWN;
- event_type < RTE_ETH_EVENT_MAX;
- event_type++) {
- diag = rte_eth_dev_callback_register(pi,
- event_type,
- eth_event_callback,
- NULL);
- if (diag) {
- printf("Failed to setup even callback for event %d\n",
- event_type);
- return -1;
- }
- }
-
/* start port */
if (rte_eth_dev_start(pi) < 0) {
printf("Fail to start port %d\n", pi);
need_check_link_status = 1;
}
+ for (event_type = RTE_ETH_EVENT_UNKNOWN;
+ event_type < RTE_ETH_EVENT_MAX;
+ event_type++) {
+ diag = rte_eth_dev_callback_register(RTE_ETH_ALL,
+ event_type,
+ eth_event_callback,
+ NULL);
+ if (diag) {
+ printf("Failed to setup even callback for event %d\n",
+ event_type);
+ return -1;
+ }
+ }
+
if (need_check_link_status == 1 && !no_link_check)
check_all_ports_link_status(RTE_PORT_ALL);
else if (need_check_link_status == 0)
port_flow_flush(port_id);
if (rte_eth_dev_detach(port_id, name)) {
- RTE_LOG(ERR, USER1, "Failed to detach port '%s'\n", name);
+ TESTPMD_LOG(ERR, "Failed to detach port '%s'\n", name);
return;
}
close_port(port_id);
printf("removing device %s\n", dev->device->name);
if (rte_eal_dev_detach(dev->device))
- RTE_LOG(ERR, USER1, "Failed to detach device %s\n",
+ TESTPMD_LOG(ERR, "Failed to detach device %s\n",
dev->device->name);
}
[RTE_ETH_EVENT_VF_MBOX] = "VF Mbox",
[RTE_ETH_EVENT_MACSEC] = "MACsec",
[RTE_ETH_EVENT_INTR_RMV] = "device removal",
+ [RTE_ETH_EVENT_NEW] = "device probed",
+ [RTE_ETH_EVENT_DESTROY] = "device released",
[RTE_ETH_EVENT_MAX] = NULL,
};
fflush(stdout);
}
+ if (port_id_is_invalid(port_id, DISABLED_WARN))
+ return 0;
+
switch (type) {
case RTE_ETH_EVENT_INTR_RMV:
if (rte_eal_alarm_set(100000,
if (tx_free_thresh != RTE_PMD_PARAM_UNSET)
port->tx_conf.tx_free_thresh = tx_free_thresh;
-
- if (txq_flags != RTE_PMD_PARAM_UNSET)
- port->tx_conf.txq_flags = txq_flags;
}
void
RTE_ETH_FOREACH_DEV(pid) {
port = &ports[pid];
- port->dev_conf.rxmode = rx_mode;
port->dev_conf.fdir_conf = fdir_conf;
if (nb_rxq > 1) {
port->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL;
/* Enter DCB configuration status */
dcb_config = 1;
+ port_conf.rxmode = rte_port->dev_conf.rxmode;
+ port_conf.txmode = rte_port->dev_conf.txmode;
+
/*set configuration of DCB in vt mode and DCB in non-vt mode*/
retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en);
if (retval < 0)
return retval;
- port_conf.rxmode.hw_vlan_filter = 1;
+ port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
/**
* Write the configuration into the device.
rxtx_port_config(rte_port);
/* VLAN filter */
- rte_port->dev_conf.rxmode.hw_vlan_filter = 1;
+ rte_port->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
for (i = 0; i < RTE_DIM(vlan_tags); i++)
rx_vft_set(pid, vlan_tags[i], 1);
if (diag < 0)
rte_panic("Cannot init EAL\n");
+ testpmd_logtype = rte_log_register("testpmd");
+ if (testpmd_logtype < 0)
+ rte_panic("Cannot register log type");
+ rte_log_set_level(testpmd_logtype, RTE_LOG_DEBUG);
+
if (mlockall(MCL_CURRENT | MCL_FUTURE)) {
- RTE_LOG(NOTICE, USER1, "mlockall() failed with error \"%s\"\n",
+ TESTPMD_LOG(NOTICE, "mlockall() failed with error \"%s\"\n",
strerror(errno));
}
nb_ports = (portid_t) rte_eth_dev_count();
if (nb_ports == 0)
- RTE_LOG(WARNING, EAL, "No probed ethernet devices\n");
+ TESTPMD_LOG(WARNING, "No probed ethernet devices\n");
/* allocate port structures, and init them */
init_port();
Code Review / deb_dpdk.git / blobdiff