Imported Upstream version 16.04
[deb_dpdk.git] / app / test / test_cryptodev.c
diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
new file mode 100644 (file)
index 0000000..8e8da98
--- /dev/null
@@ -0,0 +1,4584 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2015-2016 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *      * Redistributions of source code must retain the above copyright
+ *        notice, this list of conditions and the following disclaimer.
+ *      * Redistributions in binary form must reproduce the above copyright
+ *        notice, this list of conditions and the following disclaimer in
+ *        the documentation and/or other materials provided with the
+ *        distribution.
+ *      * Neither the name of Intel Corporation nor the names of its
+ *        contributors may be used to endorse or promote products derived
+ *        from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_common.h>
+#include <rte_hexdump.h>
+#include <rte_mbuf.h>
+#include <rte_malloc.h>
+#include <rte_memcpy.h>
+
+#include <rte_crypto.h>
+#include <rte_cryptodev.h>
+#include <rte_cryptodev_pmd.h>
+
+#include "test.h"
+#include "test_cryptodev.h"
+#include "test_cryptodev_snow3g_test_vectors.h"
+#include "test_cryptodev_snow3g_hash_test_vectors.h"
+#include "test_cryptodev_gcm_test_vectors.h"
+
+static enum rte_cryptodev_type gbl_cryptodev_type;
+
+struct crypto_testsuite_params {
+       struct rte_mempool *mbuf_pool;
+       struct rte_mempool *op_mpool;
+       struct rte_cryptodev_config conf;
+       struct rte_cryptodev_qp_conf qp_conf;
+
+       uint8_t valid_devs[RTE_CRYPTO_MAX_DEVS];
+       uint8_t valid_dev_count;
+};
+
+struct crypto_unittest_params {
+       struct rte_crypto_sym_xform cipher_xform;
+       struct rte_crypto_sym_xform auth_xform;
+
+       struct rte_cryptodev_sym_session *sess;
+
+       struct rte_crypto_op *op;
+
+       struct rte_mbuf *obuf, *ibuf;
+
+       uint8_t *digest;
+};
+
+#define ALIGN_POW2_ROUNDUP(num, align) \
+       (((num) + (align) - 1) & ~((align) - 1))
+
+/*
+ * Forward declarations.
+ */
+static int
+test_AES_CBC_HMAC_SHA512_decrypt_create_session_params(
+               struct crypto_unittest_params *ut_params);
+
+static int
+test_AES_CBC_HMAC_SHA512_decrypt_perform(struct rte_cryptodev_sym_session *sess,
+               struct crypto_unittest_params *ut_params,
+               struct crypto_testsuite_params *ts_param);
+
+static struct rte_mbuf *
+setup_test_string(struct rte_mempool *mpool,
+               const char *string, size_t len, uint8_t blocksize)
+{
+       struct rte_mbuf *m = rte_pktmbuf_alloc(mpool);
+       size_t t_len = len - (blocksize ? (len % blocksize) : 0);
+
+       memset(m->buf_addr, 0, m->buf_len);
+       if (m) {
+               char *dst = rte_pktmbuf_append(m, t_len);
+
+               if (!dst) {
+                       rte_pktmbuf_free(m);
+                       return NULL;
+               }
+               if (string != NULL)
+                       rte_memcpy(dst, string, t_len);
+               else
+                       memset(dst, 0, t_len);
+       }
+
+       return m;
+}
+static int
+setup_oop_test_mbufs(struct rte_mbuf **ibuf, struct rte_mbuf **obuf,
+               struct rte_mempool *mpool,      const char *string, size_t len,
+               uint8_t blocksize) {
+       *ibuf = setup_test_string(mpool, string, len, blocksize);
+       if (*ibuf == NULL)
+               return -(EFAULT);
+       *obuf = setup_test_string(mpool, NULL, len, blocksize);
+       if (*obuf == NULL)
+               return -(EFAULT);
+
+       return 0;
+}
+
+#if HEX_DUMP
+static void
+hexdump_mbuf_data(FILE *f, const char *title, struct rte_mbuf *m)
+{
+       rte_hexdump(f, title, rte_pktmbuf_mtod(m, const void *), m->data_len);
+}
+#endif
+
+static struct rte_crypto_op *
+process_crypto_request(uint8_t dev_id, struct rte_crypto_op *op)
+{
+#if HEX_DUMP
+       hexdump_mbuf_data(stdout, "Enqueued Packet", ibuf);
+#endif
+
+       if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
+               printf("Error sending packet for encryption");
+               return NULL;
+       }
+
+       op = NULL;
+
+       while (rte_cryptodev_dequeue_burst(dev_id, 0, &op, 1) == 0)
+               rte_pause();
+
+#if HEX_DUMP
+       if (obuf)
+               hexdump_mbuf_data(stdout, "Dequeued Packet", obuf);
+#endif
+
+       return op;
+}
+
+static struct crypto_testsuite_params testsuite_params = { NULL };
+static struct crypto_unittest_params unittest_params;
+
+static int
+testsuite_setup(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct rte_cryptodev_info info;
+       unsigned i, nb_devs, dev_id;
+       int ret;
+       uint16_t qp_id;
+
+       memset(ts_params, 0, sizeof(*ts_params));
+
+       ts_params->mbuf_pool = rte_mempool_lookup("CRYPTO_MBUFPOOL");
+       if (ts_params->mbuf_pool == NULL) {
+               /* Not already created so create */
+               ts_params->mbuf_pool = rte_pktmbuf_pool_create(
+                               "CRYPTO_MBUFPOOL",
+                               NUM_MBUFS, MBUF_CACHE_SIZE, 0, MBUF_SIZE,
+                               rte_socket_id());
+               if (ts_params->mbuf_pool == NULL) {
+                       RTE_LOG(ERR, USER1, "Can't create CRYPTO_MBUFPOOL\n");
+                       return TEST_FAILED;
+               }
+       }
+
+       ts_params->op_mpool = rte_crypto_op_pool_create(
+                       "MBUF_CRYPTO_SYM_OP_POOL",
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+                       NUM_MBUFS, MBUF_CACHE_SIZE,
+                       DEFAULT_NUM_XFORMS *
+                       sizeof(struct rte_crypto_sym_xform),
+                       rte_socket_id());
+       if (ts_params->op_mpool == NULL) {
+               RTE_LOG(ERR, USER1, "Can't create CRYPTO_OP_POOL\n");
+               return TEST_FAILED;
+       }
+
+       /* Create 2 AESNI MB devices if required */
+       if (gbl_cryptodev_type == RTE_CRYPTODEV_AESNI_MB_PMD) {
+               nb_devs = rte_cryptodev_count_devtype(
+                               RTE_CRYPTODEV_AESNI_MB_PMD);
+               if (nb_devs < 2) {
+                       for (i = nb_devs; i < 2; i++) {
+                               ret = rte_eal_vdev_init(
+                                       CRYPTODEV_NAME_AESNI_MB_PMD, NULL);
+
+                               TEST_ASSERT(ret == 0,
+                                       "Failed to create instance %u of"
+                                       " pmd : %s",
+                                       i, CRYPTODEV_NAME_AESNI_MB_PMD);
+                       }
+               }
+       }
+
+       /* Create 2 AESNI GCM devices if required */
+       if (gbl_cryptodev_type == RTE_CRYPTODEV_AESNI_GCM_PMD) {
+               nb_devs = rte_cryptodev_count_devtype(
+                               RTE_CRYPTODEV_AESNI_GCM_PMD);
+               if (nb_devs < 2) {
+                       for (i = nb_devs; i < 2; i++) {
+                               TEST_ASSERT_SUCCESS(rte_eal_vdev_init(
+                                       CRYPTODEV_NAME_AESNI_GCM_PMD, NULL),
+                                       "Failed to create instance %u of"
+                                       " pmd : %s",
+                                       i, CRYPTODEV_NAME_AESNI_GCM_PMD);
+                       }
+               }
+       }
+
+       /* Create 2 Snow3G devices if required */
+       if (gbl_cryptodev_type == RTE_CRYPTODEV_SNOW3G_PMD) {
+               nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_SNOW3G_PMD);
+               if (nb_devs < 2) {
+                       for (i = nb_devs; i < 2; i++) {
+                               TEST_ASSERT_SUCCESS(rte_eal_vdev_init(
+                                       CRYPTODEV_NAME_SNOW3G_PMD, NULL),
+                                       "Failed to create instance %u of"
+                                       " pmd : %s",
+                                       i, CRYPTODEV_NAME_SNOW3G_PMD);
+                       }
+               }
+       }
+
+       /* Create 2 NULL devices if required */
+       if (gbl_cryptodev_type == RTE_CRYPTODEV_NULL_PMD) {
+               nb_devs = rte_cryptodev_count_devtype(
+                               RTE_CRYPTODEV_NULL_PMD);
+               if (nb_devs < 2) {
+                       for (i = nb_devs; i < 2; i++) {
+                               int dev_id = rte_eal_vdev_init(
+                                       CRYPTODEV_NAME_NULL_PMD, NULL);
+
+                               TEST_ASSERT(dev_id >= 0,
+                                       "Failed to create instance %u of"
+                                       " pmd : %s",
+                                       i, CRYPTODEV_NAME_NULL_PMD);
+                       }
+               }
+       }
+
+       nb_devs = rte_cryptodev_count();
+       if (nb_devs < 1) {
+               RTE_LOG(ERR, USER1, "No crypto devices found?");
+               return TEST_FAILED;
+       }
+
+       /* Create list of valid crypto devs */
+       for (i = 0; i < nb_devs; i++) {
+               rte_cryptodev_info_get(i, &info);
+               if (info.dev_type == gbl_cryptodev_type)
+                       ts_params->valid_devs[ts_params->valid_dev_count++] = i;
+       }
+
+       if (ts_params->valid_dev_count < 1)
+               return TEST_FAILED;
+
+       /* Set up all the qps on the first of the valid devices found */
+       for (i = 0; i < 1; i++) {
+               dev_id = ts_params->valid_devs[i];
+
+               rte_cryptodev_info_get(dev_id, &info);
+
+               /*
+                * Since we can't free and re-allocate queue memory always set
+                * the queues on this device up to max size first so enough
+                * memory is allocated for any later re-configures needed by
+                * other tests
+                */
+
+               ts_params->conf.nb_queue_pairs = info.max_nb_queue_pairs;
+               ts_params->conf.socket_id = SOCKET_ID_ANY;
+               ts_params->conf.session_mp.nb_objs = info.sym.max_nb_sessions;
+
+               TEST_ASSERT_SUCCESS(rte_cryptodev_configure(dev_id,
+                               &ts_params->conf),
+                               "Failed to configure cryptodev %u with %u qps",
+                               dev_id, ts_params->conf.nb_queue_pairs);
+
+               ts_params->qp_conf.nb_descriptors = MAX_NUM_OPS_INFLIGHT;
+
+               for (qp_id = 0; qp_id < info.max_nb_queue_pairs; qp_id++) {
+                       TEST_ASSERT_SUCCESS(rte_cryptodev_queue_pair_setup(
+                                       dev_id, qp_id, &ts_params->qp_conf,
+                                       rte_cryptodev_socket_id(dev_id)),
+                                       "Failed to setup queue pair %u on "
+                                       "cryptodev %u",
+                                       qp_id, dev_id);
+               }
+       }
+
+       return TEST_SUCCESS;
+}
+
+static void
+testsuite_teardown(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+
+       if (ts_params->mbuf_pool != NULL) {
+               RTE_LOG(DEBUG, USER1, "CRYPTO_MBUFPOOL count %u\n",
+               rte_mempool_count(ts_params->mbuf_pool));
+       }
+
+       if (ts_params->op_mpool != NULL) {
+               RTE_LOG(DEBUG, USER1, "CRYPTO_OP_POOL count %u\n",
+               rte_mempool_count(ts_params->op_mpool));
+       }
+
+}
+
+static int
+ut_setup(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       uint16_t qp_id;
+
+       /* Clear unit test parameters before running test */
+       memset(ut_params, 0, sizeof(*ut_params));
+
+       /* Reconfigure device to default parameters */
+       ts_params->conf.nb_queue_pairs = DEFAULT_NUM_QPS_PER_QAT_DEVICE;
+       ts_params->conf.socket_id = SOCKET_ID_ANY;
+       ts_params->conf.session_mp.nb_objs =
+                       (gbl_cryptodev_type == RTE_CRYPTODEV_QAT_SYM_PMD) ?
+                                       DEFAULT_NUM_OPS_INFLIGHT :
+                                       DEFAULT_NUM_OPS_INFLIGHT;
+
+       TEST_ASSERT_SUCCESS(rte_cryptodev_configure(ts_params->valid_devs[0],
+                       &ts_params->conf),
+                       "Failed to configure cryptodev %u",
+                       ts_params->valid_devs[0]);
+
+       /*
+        * Now reconfigure queues to size we actually want to use in this
+        * test suite.
+        */
+       ts_params->qp_conf.nb_descriptors = DEFAULT_NUM_OPS_INFLIGHT;
+
+       for (qp_id = 0; qp_id < ts_params->conf.nb_queue_pairs ; qp_id++) {
+               TEST_ASSERT_SUCCESS(rte_cryptodev_queue_pair_setup(
+                       ts_params->valid_devs[0], qp_id,
+                       &ts_params->qp_conf,
+                       rte_cryptodev_socket_id(ts_params->valid_devs[0])),
+                       "Failed to setup queue pair %u on cryptodev %u",
+                       qp_id, ts_params->valid_devs[0]);
+       }
+
+
+       rte_cryptodev_stats_reset(ts_params->valid_devs[0]);
+
+       /* Start the device */
+       TEST_ASSERT_SUCCESS(rte_cryptodev_start(ts_params->valid_devs[0]),
+                       "Failed to start cryptodev %u",
+                       ts_params->valid_devs[0]);
+
+       return TEST_SUCCESS;
+}
+
+static void
+ut_teardown(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+       struct rte_cryptodev_stats stats;
+
+       /* free crypto session structure */
+       if (ut_params->sess) {
+               rte_cryptodev_sym_session_free(ts_params->valid_devs[0],
+                               ut_params->sess);
+               ut_params->sess = NULL;
+       }
+
+       /* free crypto operation structure */
+       if (ut_params->op)
+               rte_crypto_op_free(ut_params->op);
+
+       /*
+        * free mbuf - both obuf and ibuf are usually the same,
+        * but rte copes even if we call free twice
+        */
+       if (ut_params->obuf) {
+               rte_pktmbuf_free(ut_params->obuf);
+               ut_params->obuf = 0;
+       }
+       if (ut_params->ibuf) {
+               rte_pktmbuf_free(ut_params->ibuf);
+               ut_params->ibuf = 0;
+       }
+
+       if (ts_params->mbuf_pool != NULL)
+               RTE_LOG(DEBUG, USER1, "CRYPTO_MBUFPOOL count %u\n",
+                               rte_mempool_count(ts_params->mbuf_pool));
+
+       rte_cryptodev_stats_get(ts_params->valid_devs[0], &stats);
+
+       /* Stop the device */
+       rte_cryptodev_stop(ts_params->valid_devs[0]);
+}
+
+static int
+test_device_configure_invalid_dev_id(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       uint16_t dev_id, num_devs = 0;
+
+       TEST_ASSERT((num_devs = rte_cryptodev_count()) >= 1,
+                       "Need at least %d devices for test", 1);
+
+       /* valid dev_id values */
+       dev_id = ts_params->valid_devs[ts_params->valid_dev_count - 1];
+
+       /* Stop the device in case it's started so it can be configured */
+       rte_cryptodev_stop(ts_params->valid_devs[dev_id]);
+
+       TEST_ASSERT_SUCCESS(rte_cryptodev_configure(dev_id, &ts_params->conf),
+                       "Failed test for rte_cryptodev_configure: "
+                       "invalid dev_num %u", dev_id);
+
+       /* invalid dev_id values */
+       dev_id = num_devs;
+
+       TEST_ASSERT_FAIL(rte_cryptodev_configure(dev_id, &ts_params->conf),
+                       "Failed test for rte_cryptodev_configure: "
+                       "invalid dev_num %u", dev_id);
+
+       dev_id = 0xff;
+
+       TEST_ASSERT_FAIL(rte_cryptodev_configure(dev_id, &ts_params->conf),
+                       "Failed test for rte_cryptodev_configure:"
+                       "invalid dev_num %u", dev_id);
+
+       return TEST_SUCCESS;
+}
+
+static int
+test_device_configure_invalid_queue_pair_ids(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+
+       /* Stop the device in case it's started so it can be configured */
+       rte_cryptodev_stop(ts_params->valid_devs[0]);
+
+       /* valid - one queue pairs */
+       ts_params->conf.nb_queue_pairs = 1;
+
+       TEST_ASSERT_SUCCESS(rte_cryptodev_configure(ts_params->valid_devs[0],
+                       &ts_params->conf),
+                       "Failed to configure cryptodev: dev_id %u, qp_id %u",
+                       ts_params->valid_devs[0], ts_params->conf.nb_queue_pairs);
+
+
+       /* valid - max value queue pairs */
+       ts_params->conf.nb_queue_pairs = MAX_NUM_QPS_PER_QAT_DEVICE;
+
+       TEST_ASSERT_SUCCESS(rte_cryptodev_configure(ts_params->valid_devs[0],
+                       &ts_params->conf),
+                       "Failed to configure cryptodev: dev_id %u, qp_id %u",
+                       ts_params->valid_devs[0], ts_params->conf.nb_queue_pairs);
+
+
+       /* invalid - zero queue pairs */
+       ts_params->conf.nb_queue_pairs = 0;
+
+       TEST_ASSERT_FAIL(rte_cryptodev_configure(ts_params->valid_devs[0],
+                       &ts_params->conf),
+                       "Failed test for rte_cryptodev_configure, dev_id %u,"
+                       " invalid qps: %u",
+                       ts_params->valid_devs[0],
+                       ts_params->conf.nb_queue_pairs);
+
+
+       /* invalid - max value supported by field queue pairs */
+       ts_params->conf.nb_queue_pairs = UINT16_MAX;
+
+       TEST_ASSERT_FAIL(rte_cryptodev_configure(ts_params->valid_devs[0],
+                       &ts_params->conf),
+                       "Failed test for rte_cryptodev_configure, dev_id %u,"
+                       " invalid qps: %u",
+                       ts_params->valid_devs[0],
+                       ts_params->conf.nb_queue_pairs);
+
+
+       /* invalid - max value + 1 queue pairs */
+       ts_params->conf.nb_queue_pairs = MAX_NUM_QPS_PER_QAT_DEVICE + 1;
+
+       TEST_ASSERT_FAIL(rte_cryptodev_configure(ts_params->valid_devs[0],
+                       &ts_params->conf),
+                       "Failed test for rte_cryptodev_configure, dev_id %u,"
+                       " invalid qps: %u",
+                       ts_params->valid_devs[0],
+                       ts_params->conf.nb_queue_pairs);
+
+       return TEST_SUCCESS;
+}
+
+static int
+test_queue_pair_descriptor_setup(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct rte_cryptodev_info dev_info;
+       struct rte_cryptodev_qp_conf qp_conf = {
+               .nb_descriptors = MAX_NUM_OPS_INFLIGHT
+       };
+
+       uint16_t qp_id;
+
+       /* Stop the device in case it's started so it can be configured */
+       rte_cryptodev_stop(ts_params->valid_devs[0]);
+
+
+       rte_cryptodev_info_get(ts_params->valid_devs[0], &dev_info);
+
+       ts_params->conf.session_mp.nb_objs = dev_info.sym.max_nb_sessions;
+
+       TEST_ASSERT_SUCCESS(rte_cryptodev_configure(ts_params->valid_devs[0],
+                       &ts_params->conf), "Failed to configure cryptodev %u",
+                       ts_params->valid_devs[0]);
+
+
+       /*
+        * Test various ring sizes on this device. memzones can't be
+        * freed so are re-used if ring is released and re-created.
+        */
+       qp_conf.nb_descriptors = MIN_NUM_OPS_INFLIGHT; /* min size*/
+
+       for (qp_id = 0; qp_id < ts_params->conf.nb_queue_pairs; qp_id++) {
+               TEST_ASSERT_SUCCESS(rte_cryptodev_queue_pair_setup(
+                               ts_params->valid_devs[0], qp_id, &qp_conf,
+                               rte_cryptodev_socket_id(
+                                               ts_params->valid_devs[0])),
+                               "Failed test for "
+                               "rte_cryptodev_queue_pair_setup: num_inflights "
+                               "%u on qp %u on cryptodev %u",
+                               qp_conf.nb_descriptors, qp_id,
+                               ts_params->valid_devs[0]);
+       }
+
+       qp_conf.nb_descriptors = (uint32_t)(MAX_NUM_OPS_INFLIGHT / 2);
+
+       for (qp_id = 0; qp_id < ts_params->conf.nb_queue_pairs; qp_id++) {
+               TEST_ASSERT_SUCCESS(rte_cryptodev_queue_pair_setup(
+                               ts_params->valid_devs[0], qp_id, &qp_conf,
+                               rte_cryptodev_socket_id(
+                                               ts_params->valid_devs[0])),
+                               "Failed test for"
+                               " rte_cryptodev_queue_pair_setup: num_inflights"
+                               " %u on qp %u on cryptodev %u",
+                               qp_conf.nb_descriptors, qp_id,
+                               ts_params->valid_devs[0]);
+       }
+
+       qp_conf.nb_descriptors = MAX_NUM_OPS_INFLIGHT; /* valid */
+
+       for (qp_id = 0; qp_id < ts_params->conf.nb_queue_pairs; qp_id++) {
+               TEST_ASSERT_SUCCESS(rte_cryptodev_queue_pair_setup(
+                               ts_params->valid_devs[0], qp_id, &qp_conf,
+                               rte_cryptodev_socket_id(
+                                               ts_params->valid_devs[0])),
+                               "Failed test for "
+                               "rte_cryptodev_queue_pair_setup: num_inflights"
+                               " %u on qp %u on cryptodev %u",
+                               qp_conf.nb_descriptors, qp_id,
+                               ts_params->valid_devs[0]);
+       }
+
+       /* invalid number of descriptors - max supported + 2 */
+       qp_conf.nb_descriptors = MAX_NUM_OPS_INFLIGHT + 2;
+
+       for (qp_id = 0; qp_id < ts_params->conf.nb_queue_pairs; qp_id++) {
+               TEST_ASSERT_FAIL(rte_cryptodev_queue_pair_setup(
+                               ts_params->valid_devs[0], qp_id, &qp_conf,
+                               rte_cryptodev_socket_id(
+                                               ts_params->valid_devs[0])),
+                               "Unexpectedly passed test for "
+                               "rte_cryptodev_queue_pair_setup:"
+                               "num_inflights %u on qp %u on cryptodev %u",
+                               qp_conf.nb_descriptors, qp_id,
+                               ts_params->valid_devs[0]);
+       }
+
+       /* invalid number of descriptors - max value of parameter */
+       qp_conf.nb_descriptors = UINT32_MAX-1;
+
+       for (qp_id = 0; qp_id < ts_params->conf.nb_queue_pairs; qp_id++) {
+               TEST_ASSERT_FAIL(rte_cryptodev_queue_pair_setup(
+                               ts_params->valid_devs[0], qp_id, &qp_conf,
+                               rte_cryptodev_socket_id(
+                                               ts_params->valid_devs[0])),
+                               "Unexpectedly passed test for "
+                               "rte_cryptodev_queue_pair_setup:"
+                               "num_inflights %u on qp %u on cryptodev %u",
+                               qp_conf.nb_descriptors, qp_id,
+                               ts_params->valid_devs[0]);
+       }
+
+       qp_conf.nb_descriptors = DEFAULT_NUM_OPS_INFLIGHT;
+
+       for (qp_id = 0; qp_id < ts_params->conf.nb_queue_pairs; qp_id++) {
+               TEST_ASSERT_SUCCESS(rte_cryptodev_queue_pair_setup(
+                               ts_params->valid_devs[0], qp_id, &qp_conf,
+                               rte_cryptodev_socket_id(
+                                               ts_params->valid_devs[0])),
+                               "Failed test for"
+                               " rte_cryptodev_queue_pair_setup:"
+                               "num_inflights %u on qp %u on cryptodev %u",
+                               qp_conf.nb_descriptors, qp_id,
+                               ts_params->valid_devs[0]);
+       }
+
+       /* invalid number of descriptors - max supported + 1 */
+       qp_conf.nb_descriptors = DEFAULT_NUM_OPS_INFLIGHT + 1;
+
+       for (qp_id = 0; qp_id < ts_params->conf.nb_queue_pairs; qp_id++) {
+               TEST_ASSERT_FAIL(rte_cryptodev_queue_pair_setup(
+                               ts_params->valid_devs[0], qp_id, &qp_conf,
+                               rte_cryptodev_socket_id(
+                                               ts_params->valid_devs[0])),
+                               "Unexpectedly passed test for "
+                               "rte_cryptodev_queue_pair_setup:"
+                               "num_inflights %u on qp %u on cryptodev %u",
+                               qp_conf.nb_descriptors, qp_id,
+                               ts_params->valid_devs[0]);
+       }
+
+       /* test invalid queue pair id */
+       qp_conf.nb_descriptors = DEFAULT_NUM_OPS_INFLIGHT;      /*valid */
+
+       qp_id = DEFAULT_NUM_QPS_PER_QAT_DEVICE;         /*invalid */
+
+       TEST_ASSERT_FAIL(rte_cryptodev_queue_pair_setup(
+                       ts_params->valid_devs[0],
+                       qp_id, &qp_conf,
+                       rte_cryptodev_socket_id(ts_params->valid_devs[0])),
+                       "Failed test for rte_cryptodev_queue_pair_setup:"
+                       "invalid qp %u on cryptodev %u",
+                       qp_id, ts_params->valid_devs[0]);
+
+       qp_id = 0xffff; /*invalid*/
+
+       TEST_ASSERT_FAIL(rte_cryptodev_queue_pair_setup(
+                       ts_params->valid_devs[0],
+                       qp_id, &qp_conf,
+                       rte_cryptodev_socket_id(ts_params->valid_devs[0])),
+                       "Failed test for rte_cryptodev_queue_pair_setup:"
+                       "invalid qp %u on cryptodev %u",
+                       qp_id, ts_params->valid_devs[0]);
+
+       return TEST_SUCCESS;
+}
+
+/* ***** Plaintext data for tests ***** */
+
+const char catch_22_quote_1[] =
+               "There was only one catch and that was Catch-22, which "
+               "specified that a concern for one's safety in the face of "
+               "dangers that were real and immediate was the process of a "
+               "rational mind. Orr was crazy and could be grounded. All he "
+               "had to do was ask; and as soon as he did, he would no longer "
+               "be crazy and would have to fly more missions. Orr would be "
+               "crazy to fly more missions and sane if he didn't, but if he "
+               "was sane he had to fly them. If he flew them he was crazy "
+               "and didn't have to; but if he didn't want to he was sane and "
+               "had to. Yossarian was moved very deeply by the absolute "
+               "simplicity of this clause of Catch-22 and let out a "
+               "respectful whistle. \"That's some catch, that Catch-22\", he "
+               "observed. \"It's the best there is,\" Doc Daneeka agreed.";
+
+const char catch_22_quote[] =
+               "What a lousy earth! He wondered how many people were "
+               "destitute that same night even in his own prosperous country, "
+               "how many homes were shanties, how many husbands were drunk "
+               "and wives socked, and how many children were bullied, abused, "
+               "or abandoned. How many families hungered for food they could "
+               "not afford to buy? How many hearts were broken? How many "
+               "suicides would take place that same night, how many people "
+               "would go insane? How many cockroaches and landlords would "
+               "triumph? How many winners were losers, successes failures, "
+               "and rich men poor men? How many wise guys were stupid? How "
+               "many happy endings were unhappy endings? How many honest men "
+               "were liars, brave men cowards, loyal men traitors, how many "
+               "sainted men were corrupt, how many people in positions of "
+               "trust had sold their souls to bodyguards, how many had never "
+               "had souls? How many straight-and-narrow paths were crooked "
+               "paths? How many best families were worst families and how "
+               "many good people were bad people? When you added them all up "
+               "and then subtracted, you might be left with only the children, "
+               "and perhaps with Albert Einstein and an old violinist or "
+               "sculptor somewhere.";
+
+#define QUOTE_480_BYTES                (480)
+#define QUOTE_512_BYTES                (512)
+#define QUOTE_768_BYTES                (768)
+#define QUOTE_1024_BYTES       (1024)
+
+
+
+/* ***** SHA1 Hash Tests ***** */
+
+#define HMAC_KEY_LENGTH_SHA1   (DIGEST_BYTE_LENGTH_SHA1)
+
+static uint8_t hmac_sha1_key[] = {
+       0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA,
+       0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD,
+       0xDE, 0xF4, 0xDE, 0xAD };
+
+/* ***** SHA224 Hash Tests ***** */
+
+#define HMAC_KEY_LENGTH_SHA224 (DIGEST_BYTE_LENGTH_SHA224)
+
+
+/* ***** AES-CBC Cipher Tests ***** */
+
+#define CIPHER_KEY_LENGTH_AES_CBC      (16)
+#define CIPHER_IV_LENGTH_AES_CBC       (CIPHER_KEY_LENGTH_AES_CBC)
+
+static uint8_t aes_cbc_key[] = {
+       0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+       0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A };
+
+static uint8_t aes_cbc_iv[] = {
+       0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+       0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f };
+
+
+/* ***** AES-CBC / HMAC-SHA1 Hash Tests ***** */
+
+static const uint8_t catch_22_quote_2_512_bytes_AES_CBC_ciphertext[] = {
+       0x8B, 0x4D, 0xDA, 0x1B, 0xCF, 0x04, 0xA0, 0x31,
+       0xB4, 0xBF, 0xBD, 0x68, 0x43, 0x20, 0x7E, 0x76,
+       0xB1, 0x96, 0x8B, 0xA2, 0x7C, 0xA2, 0x83, 0x9E,
+       0x39, 0x5A, 0x2F, 0x7E, 0x92, 0xB4, 0x48, 0x1A,
+       0x3F, 0x6B, 0x5D, 0xDF, 0x52, 0x85, 0x5F, 0x8E,
+       0x42, 0x3C, 0xFB, 0xE9, 0x1A, 0x24, 0xD6, 0x08,
+       0xDD, 0xFD, 0x16, 0xFB, 0xE9, 0x55, 0xEF, 0xF0,
+       0xA0, 0x8D, 0x13, 0xAB, 0x81, 0xC6, 0x90, 0x01,
+       0xB5, 0x18, 0x84, 0xB3, 0xF6, 0xE6, 0x11, 0x57,
+       0xD6, 0x71, 0xC6, 0x3C, 0x3F, 0x2F, 0x33, 0xEE,
+       0x24, 0x42, 0x6E, 0xAC, 0x0B, 0xCA, 0xEC, 0xF9,
+       0x84, 0xF8, 0x22, 0xAA, 0x60, 0xF0, 0x32, 0xA9,
+       0x75, 0x75, 0x3B, 0xCB, 0x70, 0x21, 0x0A, 0x8D,
+       0x0F, 0xE0, 0xC4, 0x78, 0x2B, 0xF8, 0x97, 0xE3,
+       0xE4, 0x26, 0x4B, 0x29, 0xDA, 0x88, 0xCD, 0x46,
+       0xEC, 0xAA, 0xF9, 0x7F, 0xF1, 0x15, 0xEA, 0xC3,
+       0x87, 0xE6, 0x31, 0xF2, 0xCF, 0xDE, 0x4D, 0x80,
+       0x70, 0x91, 0x7E, 0x0C, 0xF7, 0x26, 0x3A, 0x92,
+       0x4F, 0x18, 0x83, 0xC0, 0x8F, 0x59, 0x01, 0xA5,
+       0x88, 0xD1, 0xDB, 0x26, 0x71, 0x27, 0x16, 0xF5,
+       0xEE, 0x10, 0x82, 0xAC, 0x68, 0x26, 0x9B, 0xE2,
+       0x6D, 0xD8, 0x9A, 0x80, 0xDF, 0x04, 0x31, 0xD5,
+       0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
+       0x58, 0x34, 0x85, 0x61, 0x1C, 0x42, 0x10, 0x76,
+       0x73, 0x02, 0x42, 0xC9, 0x23, 0x18, 0x8E, 0xB4,
+       0x6F, 0xB4, 0xA3, 0x54, 0x6E, 0x88, 0x3B, 0x62,
+       0x7C, 0x02, 0x8D, 0x4C, 0x9F, 0xC8, 0x45, 0xF4,
+       0xC9, 0xDE, 0x4F, 0xEB, 0x22, 0x83, 0x1B, 0xE4,
+       0x49, 0x37, 0xE4, 0xAD, 0xE7, 0xCD, 0x21, 0x54,
+       0xBC, 0x1C, 0xC2, 0x04, 0x97, 0xB4, 0x10, 0x61,
+       0xF0, 0xE4, 0xEF, 0x27, 0x63, 0x3A, 0xDA, 0x91,
+       0x41, 0x25, 0x62, 0x1C, 0x5C, 0xB6, 0x38, 0x4A,
+       0x88, 0x71, 0x59, 0x5A, 0x8D, 0xA0, 0x09, 0xAF,
+       0x72, 0x94, 0xD7, 0x79, 0x5C, 0x60, 0x7C, 0x8F,
+       0x4C, 0xF5, 0xD9, 0xA1, 0x39, 0x6D, 0x81, 0x28,
+       0xEF, 0x13, 0x28, 0xDF, 0xF5, 0x3E, 0xF7, 0x8E,
+       0x09, 0x9C, 0x78, 0x18, 0x79, 0xB8, 0x68, 0xD7,
+       0xA8, 0x29, 0x62, 0xAD, 0xDE, 0xE1, 0x61, 0x76,
+       0x1B, 0x05, 0x16, 0xCD, 0xBF, 0x02, 0x8E, 0xA6,
+       0x43, 0x6E, 0x92, 0x55, 0x4F, 0x60, 0x9C, 0x03,
+       0xB8, 0x4F, 0xA3, 0x02, 0xAC, 0xA8, 0xA7, 0x0C,
+       0x1E, 0xB5, 0x6B, 0xF8, 0xC8, 0x4D, 0xDE, 0xD2,
+       0xB0, 0x29, 0x6E, 0x40, 0xE6, 0xD6, 0xC9, 0xE6,
+       0xB9, 0x0F, 0xB6, 0x63, 0xF5, 0xAA, 0x2B, 0x96,
+       0xA7, 0x16, 0xAC, 0x4E, 0x0A, 0x33, 0x1C, 0xA6,
+       0xE6, 0xBD, 0x8A, 0xCF, 0x40, 0xA9, 0xB2, 0xFA,
+       0x63, 0x27, 0xFD, 0x9B, 0xD9, 0xFC, 0xD5, 0x87,
+       0x8D, 0x4C, 0xB6, 0xA4, 0xCB, 0xE7, 0x74, 0x55,
+       0xF4, 0xFB, 0x41, 0x25, 0xB5, 0x4B, 0x0A, 0x1B,
+       0xB1, 0xD6, 0xB7, 0xD9, 0x47, 0x2A, 0xC3, 0x98,
+       0x6A, 0xC4, 0x03, 0x73, 0x1F, 0x93, 0x6E, 0x53,
+       0x19, 0x25, 0x64, 0x15, 0x83, 0xF9, 0x73, 0x2A,
+       0x74, 0xB4, 0x93, 0x69, 0xC4, 0x72, 0xFC, 0x26,
+       0xA2, 0x9F, 0x43, 0x45, 0xDD, 0xB9, 0xEF, 0x36,
+       0xC8, 0x3A, 0xCD, 0x99, 0x9B, 0x54, 0x1A, 0x36,
+       0xC1, 0x59, 0xF8, 0x98, 0xA8, 0xCC, 0x28, 0x0D,
+       0x73, 0x4C, 0xEE, 0x98, 0xCB, 0x7C, 0x58, 0x7E,
+       0x20, 0x75, 0x1E, 0xB7, 0xC9, 0xF8, 0xF2, 0x0E,
+       0x63, 0x9E, 0x05, 0x78, 0x1A, 0xB6, 0xA8, 0x7A,
+       0xF9, 0x98, 0x6A, 0xA6, 0x46, 0x84, 0x2E, 0xF6,
+       0x4B, 0xDC, 0x9B, 0x8F, 0x9B, 0x8F, 0xEE, 0xB4,
+       0xAA, 0x3F, 0xEE, 0xC0, 0x37, 0x27, 0x76, 0xC7,
+       0x95, 0xBB, 0x26, 0x74, 0x69, 0x12, 0x7F, 0xF1,
+       0xBB, 0xFF, 0xAE, 0xB5, 0x99, 0x6E, 0xCB, 0x0C
+};
+
+static const uint8_t catch_22_quote_2_512_bytes_AES_CBC_HMAC_SHA1_digest[] = {
+       0x9a, 0x4f, 0x88, 0x1b, 0xb6, 0x8f, 0xd8, 0x60,
+       0x42, 0x1a, 0x7d, 0x3d, 0xf5, 0x82, 0x80, 0xf1,
+       0x18, 0x8c, 0x1d, 0x32
+};
+
+
+static int
+test_AES_CBC_HMAC_SHA1_encrypt_digest(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       /* Generate test mbuf data and space for digest */
+       ut_params->ibuf = setup_test_string(ts_params->mbuf_pool,
+                       catch_22_quote, QUOTE_512_BYTES, 0);
+
+       ut_params->digest = (uint8_t *)rte_pktmbuf_append(ut_params->ibuf,
+                       DIGEST_BYTE_LENGTH_SHA1);
+       TEST_ASSERT_NOT_NULL(ut_params->digest, "no room to append digest");
+
+       /* Setup Cipher Parameters */
+       ut_params->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+       ut_params->cipher_xform.next = &ut_params->auth_xform;
+
+       ut_params->cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_AES_CBC;
+       ut_params->cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
+       ut_params->cipher_xform.cipher.key.data = aes_cbc_key;
+       ut_params->cipher_xform.cipher.key.length = CIPHER_KEY_LENGTH_AES_CBC;
+
+       /* Setup HMAC Parameters */
+       ut_params->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+
+       ut_params->auth_xform.next = NULL;
+
+       ut_params->auth_xform.auth.op = RTE_CRYPTO_AUTH_OP_GENERATE;
+       ut_params->auth_xform.auth.algo = RTE_CRYPTO_AUTH_SHA1_HMAC;
+       ut_params->auth_xform.auth.key.length = HMAC_KEY_LENGTH_SHA1;
+       ut_params->auth_xform.auth.key.data = hmac_sha1_key;
+       ut_params->auth_xform.auth.digest_length = DIGEST_BYTE_LENGTH_SHA1;
+
+       /* Create crypto session*/
+       ut_params->sess = rte_cryptodev_sym_session_create(
+                       ts_params->valid_devs[0],
+                       &ut_params->cipher_xform);
+       TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+
+       /* Generate crypto op data structure */
+       ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+       TEST_ASSERT_NOT_NULL(ut_params->op,
+                       "Failed to allocate symmetric crypto operation struct");
+
+       rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+       struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+       /* set crypto operation source mbuf */
+       sym_op->m_src = ut_params->ibuf;
+
+       /* Set crypto operation authentication parameters */
+       sym_op->auth.digest.data = ut_params->digest;
+       sym_op->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(
+                       ut_params->ibuf, QUOTE_512_BYTES);
+       sym_op->auth.digest.length = DIGEST_BYTE_LENGTH_SHA1;
+
+       sym_op->auth.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+       sym_op->auth.data.length = QUOTE_512_BYTES;
+
+       /* Set crypto operation cipher parameters */
+       sym_op->cipher.iv.data = (uint8_t *)rte_pktmbuf_prepend(ut_params->ibuf,
+                       CIPHER_IV_LENGTH_AES_CBC);
+       sym_op->cipher.iv.phys_addr = rte_pktmbuf_mtophys(ut_params->ibuf);
+       sym_op->cipher.iv.length = CIPHER_IV_LENGTH_AES_CBC;
+
+       rte_memcpy(sym_op->cipher.iv.data, aes_cbc_iv,
+                       CIPHER_IV_LENGTH_AES_CBC);
+
+       sym_op->cipher.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+       sym_op->cipher.data.length = QUOTE_512_BYTES;
+
+       /* Process crypto operation */
+       TEST_ASSERT_NOT_NULL(process_crypto_request(ts_params->valid_devs[0],
+                       ut_params->op), "failed to process sym crypto op");
+
+       TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "crypto op processing failed");
+
+       /* Validate obuf */
+       uint8_t *ciphertext = rte_pktmbuf_mtod_offset(ut_params->op->sym->m_src,
+                       uint8_t *, CIPHER_IV_LENGTH_AES_CBC);
+
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(ciphertext,
+                       catch_22_quote_2_512_bytes_AES_CBC_ciphertext,
+                       QUOTE_512_BYTES,
+                       "ciphertext data not as expected");
+
+       uint8_t *digest = ciphertext + QUOTE_512_BYTES;
+
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(digest,
+                       catch_22_quote_2_512_bytes_AES_CBC_HMAC_SHA1_digest,
+                       gbl_cryptodev_type == RTE_CRYPTODEV_AESNI_MB_PMD ?
+                                       TRUNCATED_DIGEST_BYTE_LENGTH_SHA1 :
+                                       DIGEST_BYTE_LENGTH_SHA1,
+                       "Generated digest data not as expected");
+
+       return TEST_SUCCESS;
+}
+
+
+static int
+test_AES_CBC_HMAC_SHA1_encrypt_digest_oop(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       /* Generate test mbuf data and space for digest */
+
+       TEST_ASSERT_EQUAL(setup_oop_test_mbufs(&ut_params->ibuf,
+                       &ut_params->obuf, ts_params->mbuf_pool, catch_22_quote,
+                       QUOTE_512_BYTES, 0), 0,
+                       "Allocation of rte_mbuf failed");
+
+       ut_params->digest = (uint8_t *)rte_pktmbuf_append(ut_params->obuf,
+                               DIGEST_BYTE_LENGTH_SHA1);
+
+       TEST_ASSERT_NOT_NULL(ut_params->digest, "no room to append digest");
+
+       ut_params->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+       ut_params->cipher_xform.next = &ut_params->auth_xform;
+
+       ut_params->cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_AES_CBC;
+       ut_params->cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
+       ut_params->cipher_xform.cipher.key.data = aes_cbc_key;
+       ut_params->cipher_xform.cipher.key.length = CIPHER_KEY_LENGTH_AES_CBC;
+
+       ut_params->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+       ut_params->auth_xform.next = NULL;
+
+       ut_params->auth_xform.auth.op = RTE_CRYPTO_AUTH_OP_GENERATE;
+       ut_params->auth_xform.auth.algo = RTE_CRYPTO_AUTH_SHA1_HMAC;
+       ut_params->auth_xform.auth.key.length = HMAC_KEY_LENGTH_SHA1;
+       ut_params->auth_xform.auth.key.data = hmac_sha1_key;
+       ut_params->auth_xform.auth.digest_length = DIGEST_BYTE_LENGTH_SHA1;
+
+       ut_params->sess = rte_cryptodev_sym_session_create(
+                       ts_params->valid_devs[0],
+                       &ut_params->cipher_xform);
+
+       TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+
+       ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+
+
+       TEST_ASSERT_NOT_NULL(ut_params->op,
+                       "Failed to allocate symmetric crypto operation struct");
+
+       rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+       struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+       /* set crypto operation source mbuf */
+       sym_op->m_src = ut_params->ibuf;
+       sym_op->m_dst = ut_params->obuf;
+
+       sym_op->auth.digest.data = ut_params->digest;
+
+       sym_op->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(
+                       ut_params->obuf, QUOTE_512_BYTES);
+
+       sym_op->auth.digest.length = DIGEST_BYTE_LENGTH_SHA1;
+       sym_op->auth.data.length = QUOTE_512_BYTES;
+
+       /* Set crypto operation cipher parameters */
+       sym_op->cipher.iv.data = (uint8_t *)rte_pktmbuf_prepend(ut_params->ibuf,
+                       CIPHER_IV_LENGTH_AES_CBC);
+
+       TEST_ASSERT_NOT_NULL(sym_op->cipher.iv.data,
+                       "Failed to prepend place for iv input");
+
+       TEST_ASSERT_NOT_NULL(rte_pktmbuf_prepend(ut_params->obuf,
+                       CIPHER_IV_LENGTH_AES_CBC),
+                       "Failed to prepend place for iv output");
+
+       sym_op->auth.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+
+       sym_op->cipher.iv.phys_addr = rte_pktmbuf_mtophys(ut_params->ibuf);
+       sym_op->cipher.iv.length = CIPHER_IV_LENGTH_AES_CBC;
+
+       rte_memcpy(sym_op->cipher.iv.data, aes_cbc_iv,
+                       CIPHER_IV_LENGTH_AES_CBC);
+
+       sym_op->cipher.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+       sym_op->cipher.data.length = QUOTE_512_BYTES;
+
+
+       /* Process crypto operation */
+       TEST_ASSERT_NOT_NULL(process_crypto_request(ts_params->valid_devs[0],
+                       ut_params->op), "failed to process sym crypto op");
+
+       TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "crypto op processing failed");
+
+       /* Validate obuf */
+       uint8_t *ciphertext;
+
+       ciphertext = rte_pktmbuf_mtod_offset(ut_params->op->sym->m_dst,
+                       uint8_t *, CIPHER_IV_LENGTH_AES_CBC);
+
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(ciphertext,
+                       catch_22_quote_2_512_bytes_AES_CBC_ciphertext,
+                       QUOTE_512_BYTES,
+                       "ciphertext data not as expected");
+
+       uint8_t *digest = ciphertext + QUOTE_512_BYTES;
+
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(digest,
+                       catch_22_quote_2_512_bytes_AES_CBC_HMAC_SHA1_digest,
+                       gbl_cryptodev_type == RTE_CRYPTODEV_AESNI_MB_PMD ?
+                                       TRUNCATED_DIGEST_BYTE_LENGTH_SHA1 :
+                                       DIGEST_BYTE_LENGTH_SHA1,
+                       "Generated digest data not as expected");
+
+
+       return TEST_SUCCESS;
+}
+
+
+static int
+test_AES_CBC_HMAC_SHA1_decrypt_digest_oop_ver(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       /* Generate test mbuf data and digest */
+
+       TEST_ASSERT_EQUAL(setup_oop_test_mbufs(&ut_params->ibuf,
+                       &ut_params->obuf, ts_params->mbuf_pool,
+                       (const char *)
+                       catch_22_quote_2_512_bytes_AES_CBC_ciphertext,
+                       QUOTE_512_BYTES, 0), 0,
+                       "Allocation of rte_mbuf failed");
+
+       ut_params->digest = (uint8_t *)rte_pktmbuf_append(ut_params->ibuf,
+                       DIGEST_BYTE_LENGTH_SHA1);
+
+       TEST_ASSERT_NOT_NULL(ut_params->digest, "no room to append digest");
+
+       rte_memcpy(ut_params->digest,
+                       catch_22_quote_2_512_bytes_AES_CBC_HMAC_SHA1_digest,
+                       DIGEST_BYTE_LENGTH_SHA1);
+
+       /* Setup Cipher Parameters */
+       ut_params->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+       ut_params->cipher_xform.next = NULL;
+
+       ut_params->cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_AES_CBC;
+       ut_params->cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_DECRYPT;
+       ut_params->cipher_xform.cipher.key.data = aes_cbc_key;
+       ut_params->cipher_xform.cipher.key.length = CIPHER_KEY_LENGTH_AES_CBC;
+
+       /* Setup HMAC Parameters */
+       ut_params->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+       ut_params->auth_xform.next = &ut_params->cipher_xform;
+
+       ut_params->auth_xform.auth.op = RTE_CRYPTO_AUTH_OP_VERIFY;
+       ut_params->auth_xform.auth.algo = RTE_CRYPTO_AUTH_SHA1_HMAC;
+       ut_params->auth_xform.auth.key.length = HMAC_KEY_LENGTH_SHA1;
+       ut_params->auth_xform.auth.key.data = hmac_sha1_key;
+       ut_params->auth_xform.auth.digest_length = DIGEST_BYTE_LENGTH_SHA1;
+
+       /* Create Crypto session*/
+       ut_params->sess =
+               rte_cryptodev_sym_session_create(ts_params->valid_devs[0],
+                                               &ut_params->auth_xform);
+       TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+
+       /* Generate Crypto op data structure */
+       ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+       TEST_ASSERT_NOT_NULL(ut_params->op,
+                       "Failed to allocate symmetric crypto operation struct");
+
+       /* attach symmetric crypto session to crypto operations */
+       rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+       struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+       /* set crypto operation source mbuf */
+       sym_op->m_src = ut_params->ibuf;
+       sym_op->m_dst = ut_params->obuf;
+
+       sym_op->auth.digest.data = ut_params->digest;
+       sym_op->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(
+                       ut_params->ibuf, QUOTE_512_BYTES);
+       sym_op->auth.digest.length = DIGEST_BYTE_LENGTH_SHA1;
+
+       sym_op->auth.data.length = QUOTE_512_BYTES;
+
+       sym_op->cipher.iv.data = (uint8_t *)rte_pktmbuf_prepend(ut_params->ibuf,
+                       CIPHER_IV_LENGTH_AES_CBC);
+
+       TEST_ASSERT_NOT_NULL(sym_op->cipher.iv.data,
+                       "Failed to prepend place for iv input");
+
+       TEST_ASSERT_NOT_NULL(rte_pktmbuf_prepend(ut_params->obuf,
+                       CIPHER_IV_LENGTH_AES_CBC),
+                       "Failed to prepend place for iv output");
+
+       sym_op->auth.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+
+       sym_op->cipher.iv.phys_addr = rte_pktmbuf_mtophys(ut_params->ibuf);
+       sym_op->cipher.iv.length = CIPHER_IV_LENGTH_AES_CBC;
+
+       rte_memcpy(sym_op->cipher.iv.data, aes_cbc_iv,
+                       CIPHER_IV_LENGTH_AES_CBC);
+
+       sym_op->cipher.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+       sym_op->cipher.data.length = QUOTE_512_BYTES;
+
+
+       /* Process crypto operation */
+       TEST_ASSERT_NOT_NULL(process_crypto_request(ts_params->valid_devs[0],
+                       ut_params->op), "failed to process sym crypto op");
+
+       TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "Digest verification failed");
+
+       ut_params->obuf = ut_params->op->sym->m_dst;
+
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+                       rte_pktmbuf_mtod(ut_params->obuf, uint8_t *) +
+                       CIPHER_IV_LENGTH_AES_CBC,
+                       catch_22_quote,
+                       QUOTE_512_BYTES,
+                       "Ciphertext data not as expected");
+
+
+       return TEST_SUCCESS;
+}
+
+
+static int
+test_AES_CBC_HMAC_SHA1_encrypt_digest_sessionless(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       /* Generate test mbuf data and space for digest */
+       ut_params->ibuf = setup_test_string(ts_params->mbuf_pool,
+                       catch_22_quote, QUOTE_512_BYTES, 0);
+
+       ut_params->digest = (uint8_t *)rte_pktmbuf_append(ut_params->ibuf,
+                       DIGEST_BYTE_LENGTH_SHA1);
+       TEST_ASSERT_NOT_NULL(ut_params->digest, "no room to append digest");
+
+       /* Generate Crypto op data structure */
+       ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+       TEST_ASSERT_NOT_NULL(ut_params->op,
+                       "Failed to allocate symmetric crypto operation struct");
+
+       TEST_ASSERT_NOT_NULL(rte_crypto_op_sym_xforms_alloc(ut_params->op, 2),
+                       "failed to allocate space for crypto transforms");
+
+       struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+       /* set crypto operation source mbuf */
+       sym_op->m_src = ut_params->ibuf;
+
+       /* Set crypto operation data parameters */
+       sym_op->xform->type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+
+       /* cipher parameters */
+       sym_op->xform->cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
+       sym_op->xform->cipher.algo = RTE_CRYPTO_CIPHER_AES_CBC;
+       sym_op->xform->cipher.key.data = aes_cbc_key;
+       sym_op->xform->cipher.key.length = CIPHER_KEY_LENGTH_AES_CBC;
+
+       /* hash parameters */
+       sym_op->xform->next->type = RTE_CRYPTO_SYM_XFORM_AUTH;
+
+       sym_op->xform->next->auth.op = RTE_CRYPTO_AUTH_OP_GENERATE;
+       sym_op->xform->next->auth.algo = RTE_CRYPTO_AUTH_SHA1_HMAC;
+       sym_op->xform->next->auth.key.length = HMAC_KEY_LENGTH_SHA1;
+       sym_op->xform->next->auth.key.data = hmac_sha1_key;
+       sym_op->xform->next->auth.digest_length =
+                       DIGEST_BYTE_LENGTH_SHA1;
+
+       sym_op->auth.digest.data = ut_params->digest;
+       sym_op->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(
+                       ut_params->ibuf, QUOTE_512_BYTES);
+       sym_op->auth.digest.length = DIGEST_BYTE_LENGTH_SHA1;
+
+
+       sym_op->auth.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+       sym_op->auth.data.length = QUOTE_512_BYTES;
+
+       sym_op->cipher.iv.data = (uint8_t *)rte_pktmbuf_prepend(ut_params->ibuf,
+                       CIPHER_IV_LENGTH_AES_CBC);
+       sym_op->cipher.iv.phys_addr = rte_pktmbuf_mtophys(ut_params->ibuf);
+       sym_op->cipher.iv.length = CIPHER_IV_LENGTH_AES_CBC;
+
+       rte_memcpy(sym_op->cipher.iv.data, aes_cbc_iv,
+                       CIPHER_IV_LENGTH_AES_CBC);
+
+       sym_op->cipher.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+       sym_op->cipher.data.length = QUOTE_512_BYTES;
+
+       /* Process crypto operation */
+       TEST_ASSERT_NOT_NULL(process_crypto_request(ts_params->valid_devs[0],
+                       ut_params->op), "failed to process sym crypto op");
+
+       TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "crypto op processing failed");
+
+       ut_params->obuf = ut_params->op->sym->m_src;
+
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+                       rte_pktmbuf_mtod(ut_params->obuf, uint8_t *) +
+                       CIPHER_IV_LENGTH_AES_CBC,
+                       catch_22_quote_2_512_bytes_AES_CBC_ciphertext,
+                       QUOTE_512_BYTES,
+                       "Ciphertext data not as expected");
+
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+                       rte_pktmbuf_mtod(ut_params->obuf, uint8_t *) +
+                       CIPHER_IV_LENGTH_AES_CBC + QUOTE_512_BYTES,
+                       catch_22_quote_2_512_bytes_AES_CBC_HMAC_SHA1_digest,
+                       gbl_cryptodev_type == RTE_CRYPTODEV_AESNI_MB_PMD ?
+                                       TRUNCATED_DIGEST_BYTE_LENGTH_SHA1 :
+                                       DIGEST_BYTE_LENGTH_SHA1,
+                       "Generated digest data not as expected");
+
+
+       return TEST_SUCCESS;
+}
+
+static int
+test_AES_CBC_HMAC_SHA1_decrypt_digest_verify(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       /* Generate test mbuf data and digest */
+       ut_params->ibuf = setup_test_string(ts_params->mbuf_pool,
+                       (const char *)
+                       catch_22_quote_2_512_bytes_AES_CBC_ciphertext,
+                       QUOTE_512_BYTES, 0);
+
+       ut_params->digest = (uint8_t *)rte_pktmbuf_append(ut_params->ibuf,
+                       DIGEST_BYTE_LENGTH_SHA1);
+       TEST_ASSERT_NOT_NULL(ut_params->digest, "no room to append digest");
+
+       rte_memcpy(ut_params->digest,
+                       catch_22_quote_2_512_bytes_AES_CBC_HMAC_SHA1_digest,
+                       DIGEST_BYTE_LENGTH_SHA1);
+
+       /* Setup Cipher Parameters */
+       ut_params->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+       ut_params->cipher_xform.next = NULL;
+
+       ut_params->cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_AES_CBC;
+       ut_params->cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_DECRYPT;
+       ut_params->cipher_xform.cipher.key.data = aes_cbc_key;
+       ut_params->cipher_xform.cipher.key.length = CIPHER_KEY_LENGTH_AES_CBC;
+
+       /* Setup HMAC Parameters */
+       ut_params->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+       ut_params->auth_xform.next = &ut_params->cipher_xform;
+
+       ut_params->auth_xform.auth.op = RTE_CRYPTO_AUTH_OP_VERIFY;
+       ut_params->auth_xform.auth.algo = RTE_CRYPTO_AUTH_SHA1_HMAC;
+       ut_params->auth_xform.auth.key.length = HMAC_KEY_LENGTH_SHA1;
+       ut_params->auth_xform.auth.key.data = hmac_sha1_key;
+       ut_params->auth_xform.auth.digest_length = DIGEST_BYTE_LENGTH_SHA1;
+
+       /* Create Crypto session*/
+       ut_params->sess =
+               rte_cryptodev_sym_session_create(ts_params->valid_devs[0],
+                                               &ut_params->auth_xform);
+       TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+
+       /* Generate Crypto op data structure */
+       ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+       TEST_ASSERT_NOT_NULL(ut_params->op,
+                       "Failed to allocate symmetric crypto operation struct");
+
+       /* attach symmetric crypto session to crypto operations */
+       rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+       struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+       /* set crypto operation source mbuf */
+       sym_op->m_src = ut_params->ibuf;
+
+       sym_op->auth.digest.data = ut_params->digest;
+       sym_op->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(
+                       ut_params->ibuf, QUOTE_512_BYTES);
+       sym_op->auth.digest.length = DIGEST_BYTE_LENGTH_SHA1;
+
+       sym_op->auth.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+       sym_op->auth.data.length = QUOTE_512_BYTES;
+
+       sym_op->cipher.iv.data = (uint8_t *)rte_pktmbuf_prepend(ut_params->ibuf,
+                       CIPHER_IV_LENGTH_AES_CBC);
+       sym_op->cipher.iv.phys_addr = rte_pktmbuf_mtophys(ut_params->ibuf);
+       sym_op->cipher.iv.length = CIPHER_IV_LENGTH_AES_CBC;
+
+       rte_memcpy(sym_op->cipher.iv.data, aes_cbc_iv,
+                       CIPHER_IV_LENGTH_AES_CBC);
+
+       sym_op->cipher.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+       sym_op->cipher.data.length = QUOTE_512_BYTES;
+
+
+       /* Process crypto operation */
+       TEST_ASSERT_NOT_NULL(process_crypto_request(ts_params->valid_devs[0],
+                       ut_params->op), "failed to process sym crypto op");
+
+       TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "crypto op processing failed");
+
+       ut_params->obuf = ut_params->op->sym->m_src;
+
+
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+                       rte_pktmbuf_mtod(ut_params->obuf, uint8_t *) +
+                       CIPHER_IV_LENGTH_AES_CBC,
+                       catch_22_quote,
+                       QUOTE_512_BYTES,
+                       "Ciphertext data not as expected");
+
+       TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "Digest verification failed");
+
+
+       return TEST_SUCCESS;
+}
+
+
+/* ***** AES-CBC / HMAC-SHA256 Hash Tests ***** */
+
+#define HMAC_KEY_LENGTH_SHA256 (DIGEST_BYTE_LENGTH_SHA256)
+
+static uint8_t hmac_sha256_key[] = {
+       0x42, 0x1a, 0x7d, 0x3d, 0xf5, 0x82, 0x80, 0xf1,
+       0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
+       0x58, 0x34, 0x85, 0x61, 0x1C, 0x42, 0x10, 0x76,
+       0x9a, 0x4f, 0x88, 0x1b, 0xb6, 0x8f, 0xd8, 0x60 };
+
+static const uint8_t catch_22_quote_2_512_bytes_AES_CBC_HMAC_SHA256_digest[] = {
+       0xc8, 0x57, 0x57, 0x31, 0x03, 0xe0, 0x03, 0x55,
+       0x07, 0xc8, 0x9e, 0x7f, 0x48, 0x9a, 0x61, 0x9a,
+       0x68, 0xee, 0x03, 0x0e, 0x71, 0x75, 0xc7, 0xf4,
+       0x2e, 0x45, 0x26, 0x32, 0x7c, 0x12, 0x15, 0x15 };
+
+static int
+test_AES_CBC_HMAC_SHA256_encrypt_digest(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       /* Generate test mbuf data and space for digest */
+       ut_params->ibuf = setup_test_string(ts_params->mbuf_pool,
+                       catch_22_quote, QUOTE_512_BYTES, 0);
+
+       ut_params->digest = (uint8_t *)rte_pktmbuf_append(ut_params->ibuf,
+                       DIGEST_BYTE_LENGTH_SHA256);
+       TEST_ASSERT_NOT_NULL(ut_params->digest, "no room to append digest");
+
+       /* Setup Cipher Parameters */
+       ut_params->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+       ut_params->cipher_xform.next = &ut_params->auth_xform;
+
+       ut_params->cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_AES_CBC;
+       ut_params->cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
+       ut_params->cipher_xform.cipher.key.data = aes_cbc_key;
+       ut_params->cipher_xform.cipher.key.length = CIPHER_KEY_LENGTH_AES_CBC;
+
+       /* Setup HMAC Parameters */
+       ut_params->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+       ut_params->auth_xform.next = NULL;
+
+       ut_params->auth_xform.auth.op = RTE_CRYPTO_AUTH_OP_GENERATE;
+       ut_params->auth_xform.auth.algo = RTE_CRYPTO_AUTH_SHA256_HMAC;
+       ut_params->auth_xform.auth.key.length = HMAC_KEY_LENGTH_SHA256;
+       ut_params->auth_xform.auth.key.data = hmac_sha256_key;
+       ut_params->auth_xform.auth.digest_length = DIGEST_BYTE_LENGTH_SHA256;
+
+       /* Create Crypto session*/
+       ut_params->sess = rte_cryptodev_sym_session_create(
+                       ts_params->valid_devs[0],
+                       &ut_params->cipher_xform);
+       TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+
+       /* Generate Crypto op data structure */
+       ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+       TEST_ASSERT_NOT_NULL(ut_params->op,
+                       "Failed to allocate symmetric crypto operation struct");
+
+       rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+       struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+       /* set crypto operation source mbuf */
+       sym_op->m_src = ut_params->ibuf;
+
+       sym_op->auth.digest.data = ut_params->digest;
+       sym_op->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(
+                       ut_params->ibuf, QUOTE_512_BYTES);
+       sym_op->auth.digest.length = DIGEST_BYTE_LENGTH_SHA256;
+
+       sym_op->auth.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+       sym_op->auth.data.length = QUOTE_512_BYTES;
+
+       sym_op->cipher.iv.data = (uint8_t *)rte_pktmbuf_prepend(ut_params->ibuf,
+                       CIPHER_IV_LENGTH_AES_CBC);
+       sym_op->cipher.iv.phys_addr = rte_pktmbuf_mtophys(ut_params->ibuf);
+       sym_op->cipher.iv.length = CIPHER_IV_LENGTH_AES_CBC;
+
+       rte_memcpy(sym_op->cipher.iv.data, aes_cbc_iv,
+                       CIPHER_IV_LENGTH_AES_CBC);
+
+       sym_op->cipher.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+       sym_op->cipher.data.length = QUOTE_512_BYTES;
+
+       /* Process crypto operation */
+       TEST_ASSERT_NOT_NULL(process_crypto_request(ts_params->valid_devs[0],
+                       ut_params->op), "failed to process sym crypto op");
+
+       TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "crypto op processing failed");
+
+       ut_params->obuf = ut_params->op->sym->m_src;
+
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+                       rte_pktmbuf_mtod(ut_params->obuf, uint8_t *) +
+                       CIPHER_IV_LENGTH_AES_CBC,
+                       catch_22_quote_2_512_bytes_AES_CBC_ciphertext,
+                       QUOTE_512_BYTES,
+                       "Ciphertext data not as expected");
+
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+                       rte_pktmbuf_mtod(ut_params->obuf, uint8_t *) +
+                       CIPHER_IV_LENGTH_AES_CBC + QUOTE_512_BYTES,
+                       catch_22_quote_2_512_bytes_AES_CBC_HMAC_SHA256_digest,
+                       gbl_cryptodev_type == RTE_CRYPTODEV_AESNI_MB_PMD ?
+                                       TRUNCATED_DIGEST_BYTE_LENGTH_SHA256 :
+                                       DIGEST_BYTE_LENGTH_SHA256,
+                       "Generated digest data not as expected");
+
+
+       return TEST_SUCCESS;
+}
+
+static int
+test_AES_CBC_HMAC_SHA256_decrypt_digest_verify(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       /* Generate test mbuf data and digest */
+       ut_params->ibuf = setup_test_string(ts_params->mbuf_pool,
+                       (const char *)
+                       catch_22_quote_2_512_bytes_AES_CBC_ciphertext,
+                       QUOTE_512_BYTES, 0);
+
+       ut_params->digest = (uint8_t *)rte_pktmbuf_append(ut_params->ibuf,
+                       DIGEST_BYTE_LENGTH_SHA256);
+       TEST_ASSERT_NOT_NULL(ut_params->digest, "no room to append digest");
+
+       rte_memcpy(ut_params->digest,
+                       catch_22_quote_2_512_bytes_AES_CBC_HMAC_SHA256_digest,
+                       DIGEST_BYTE_LENGTH_SHA256);
+
+       /* Setup Cipher Parameters */
+       ut_params->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+       ut_params->cipher_xform.next = NULL;
+
+       ut_params->cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_AES_CBC;
+       ut_params->cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_DECRYPT;
+       ut_params->cipher_xform.cipher.key.data = aes_cbc_key;
+       ut_params->cipher_xform.cipher.key.length = CIPHER_KEY_LENGTH_AES_CBC;
+
+       /* Setup HMAC Parameters */
+       ut_params->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+       ut_params->auth_xform.next = &ut_params->cipher_xform;
+
+       ut_params->auth_xform.auth.op = RTE_CRYPTO_AUTH_OP_VERIFY;
+       ut_params->auth_xform.auth.algo = RTE_CRYPTO_AUTH_SHA256_HMAC;
+       ut_params->auth_xform.auth.key.data = hmac_sha256_key;
+       ut_params->auth_xform.auth.key.length = HMAC_KEY_LENGTH_SHA256;
+       ut_params->auth_xform.auth.digest_length = DIGEST_BYTE_LENGTH_SHA256;
+
+       /* Create Crypto session*/
+       ut_params->sess =
+               rte_cryptodev_sym_session_create(ts_params->valid_devs[0],
+                                               &ut_params->auth_xform);
+       TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+
+       /* Generate Crypto op data structure */
+       ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+       TEST_ASSERT_NOT_NULL(ut_params->op,
+                       "Failed to allocate symmetric crypto operation struct");
+
+
+       /* Set crypto operation data parameters */
+       rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+       struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+       /* set crypto operation source mbuf */
+       sym_op->m_src = ut_params->ibuf;
+
+       sym_op->auth.digest.data = ut_params->digest;
+       sym_op->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(
+                       ut_params->ibuf, QUOTE_512_BYTES);
+       sym_op->auth.digest.length = DIGEST_BYTE_LENGTH_SHA256;
+
+       sym_op->auth.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+       sym_op->auth.data.length = QUOTE_512_BYTES;
+
+       sym_op->cipher.iv.data = (uint8_t *)rte_pktmbuf_prepend(
+                       ut_params->ibuf, CIPHER_IV_LENGTH_AES_CBC);
+       sym_op->cipher.iv.phys_addr = rte_pktmbuf_mtophys(ut_params->ibuf);
+       sym_op->cipher.iv.length = CIPHER_IV_LENGTH_AES_CBC;
+
+       rte_memcpy(sym_op->cipher.iv.data, aes_cbc_iv,
+                       CIPHER_IV_LENGTH_AES_CBC);
+
+       sym_op->cipher.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+       sym_op->cipher.data.length = QUOTE_512_BYTES;
+
+       /* Process crypto operation */
+       TEST_ASSERT_NOT_NULL(process_crypto_request(ts_params->valid_devs[0],
+                       ut_params->op), "failed to process sym crypto op");
+
+       TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "crypto op processing failed");
+
+       ut_params->obuf = ut_params->op->sym->m_src;
+
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+                       rte_pktmbuf_mtod(ut_params->obuf, uint8_t *) +
+                       CIPHER_IV_LENGTH_AES_CBC, catch_22_quote,
+                       QUOTE_512_BYTES,
+                       "Plaintext data not as expected");
+
+       TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "Digest verification failed");
+
+       return TEST_SUCCESS;
+}
+
+/* ***** AES-CBC / HMAC-SHA512 Hash Tests ***** */
+
+#define HMAC_KEY_LENGTH_SHA512  (DIGEST_BYTE_LENGTH_SHA512)
+
+static uint8_t hmac_sha512_key[] = {
+       0x42, 0x1a, 0x7d, 0x3d, 0xf5, 0x82, 0x80, 0xf1,
+       0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
+       0x58, 0x34, 0x85, 0x65, 0x1C, 0x42, 0x50, 0x76,
+       0x9a, 0xaf, 0x88, 0x1b, 0xb6, 0x8f, 0xf8, 0x60,
+       0xa2, 0x5a, 0x7f, 0x3f, 0xf4, 0x72, 0x70, 0xf1,
+       0xF5, 0x35, 0x4C, 0x3B, 0xDD, 0x90, 0x65, 0xB0,
+       0x47, 0x3a, 0x75, 0x61, 0x5C, 0xa2, 0x10, 0x76,
+       0x9a, 0xaf, 0x77, 0x5b, 0xb6, 0x7f, 0xf7, 0x60 };
+
+static const uint8_t catch_22_quote_2_512_bytes_AES_CBC_HMAC_SHA512_digest[] = {
+       0x5D, 0x54, 0x66, 0xC1, 0x6E, 0xBC, 0x04, 0xB8,
+       0x46, 0xB8, 0x08, 0x6E, 0xE0, 0xF0, 0x43, 0x48,
+       0x37, 0x96, 0x9C, 0xC6, 0x9C, 0xC2, 0x1E, 0xE8,
+       0xF2, 0x0C, 0x0B, 0xEF, 0x86, 0xA2, 0xE3, 0x70,
+       0x95, 0xC8, 0xB3, 0x06, 0x47, 0xA9, 0x90, 0xE8,
+       0xA0, 0xC6, 0x72, 0x69, 0x05, 0xC0, 0x0D, 0x0E,
+       0x21, 0x96, 0x65, 0x93, 0x74, 0x43, 0x2A, 0x1D,
+       0x2E, 0xBF, 0xC2, 0xC2, 0xEE, 0xCC, 0x2F, 0x0A };
+
+static int
+test_AES_CBC_HMAC_SHA512_encrypt_digest(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       /* Generate test mbuf data and space for digest */
+       ut_params->ibuf = setup_test_string(ts_params->mbuf_pool,
+                       catch_22_quote, QUOTE_512_BYTES, 0);
+
+       ut_params->digest = (uint8_t *)rte_pktmbuf_append(ut_params->ibuf,
+                       DIGEST_BYTE_LENGTH_SHA512);
+       TEST_ASSERT_NOT_NULL(ut_params->digest, "no room to append digest");
+
+       /* Setup Cipher Parameters */
+       ut_params->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+       ut_params->cipher_xform.next = &ut_params->auth_xform;
+
+       ut_params->cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_AES_CBC;
+       ut_params->cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
+       ut_params->cipher_xform.cipher.key.data = aes_cbc_key;
+       ut_params->cipher_xform.cipher.key.length = CIPHER_KEY_LENGTH_AES_CBC;
+
+       /* Setup HMAC Parameters */
+       ut_params->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+       ut_params->auth_xform.next = NULL;
+
+       ut_params->auth_xform.auth.op = RTE_CRYPTO_AUTH_OP_GENERATE;
+       ut_params->auth_xform.auth.algo = RTE_CRYPTO_AUTH_SHA512_HMAC;
+       ut_params->auth_xform.auth.key.length = HMAC_KEY_LENGTH_SHA512;
+       ut_params->auth_xform.auth.key.data = hmac_sha512_key;
+       ut_params->auth_xform.auth.digest_length = DIGEST_BYTE_LENGTH_SHA512;
+
+       /* Create Crypto session*/
+       ut_params->sess =
+               rte_cryptodev_sym_session_create(ts_params->valid_devs[0],
+                                               &ut_params->cipher_xform);
+
+       TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+
+       /* Generate Crypto op data structure */
+       ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+       TEST_ASSERT_NOT_NULL(ut_params->op,
+                       "Failed to allocate symmetric crypto operation struct");
+
+       rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+       struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+       /* set crypto operation source mbuf */
+       sym_op->m_src = ut_params->ibuf;
+
+       sym_op->auth.digest.data = ut_params->digest;
+       sym_op->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(
+                       ut_params->ibuf, QUOTE_512_BYTES);
+       sym_op->auth.digest.length = DIGEST_BYTE_LENGTH_SHA512;
+
+       sym_op->auth.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+       sym_op->auth.data.length = QUOTE_512_BYTES;
+
+       sym_op->cipher.iv.data = (uint8_t *)rte_pktmbuf_prepend(ut_params->ibuf,
+                       CIPHER_IV_LENGTH_AES_CBC);
+       sym_op->cipher.iv.phys_addr = rte_pktmbuf_mtophys(ut_params->ibuf);
+       sym_op->cipher.iv.length = CIPHER_IV_LENGTH_AES_CBC;
+
+       rte_memcpy(sym_op->cipher.iv.data, aes_cbc_iv,
+                       CIPHER_IV_LENGTH_AES_CBC);
+
+       sym_op->cipher.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+       sym_op->cipher.data.length = QUOTE_512_BYTES;
+
+       /* Process crypto operation */
+       TEST_ASSERT_NOT_NULL(process_crypto_request(ts_params->valid_devs[0],
+                       ut_params->op), "failed to process sym crypto op");
+
+       TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "crypto op processing failed");
+
+       ut_params->obuf = ut_params->op->sym->m_src;
+
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+                       rte_pktmbuf_mtod(ut_params->obuf, uint8_t *) +
+                       CIPHER_IV_LENGTH_AES_CBC,
+                       catch_22_quote_2_512_bytes_AES_CBC_ciphertext,
+                       QUOTE_512_BYTES,
+                       "Ciphertext data not as expected");
+
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+                       rte_pktmbuf_mtod(ut_params->obuf, uint8_t *) +
+                       CIPHER_IV_LENGTH_AES_CBC + QUOTE_512_BYTES,
+                       catch_22_quote_2_512_bytes_AES_CBC_HMAC_SHA512_digest,
+                       gbl_cryptodev_type == RTE_CRYPTODEV_AESNI_MB_PMD ?
+                                       TRUNCATED_DIGEST_BYTE_LENGTH_SHA512 :
+                                       DIGEST_BYTE_LENGTH_SHA512,
+                       "Generated digest data not as expected");
+
+       return TEST_SUCCESS;
+}
+
+
+static int
+test_AES_CBC_HMAC_SHA512_decrypt_create_session_params(
+               struct crypto_unittest_params *ut_params);
+
+static int
+test_AES_CBC_HMAC_SHA512_decrypt_perform(struct rte_cryptodev_sym_session *sess,
+               struct crypto_unittest_params *ut_params,
+               struct crypto_testsuite_params *ts_params);
+
+static int
+test_AES_CBC_HMAC_SHA512_decrypt_digest_verify(void)
+{
+       struct crypto_unittest_params *ut_params = &unittest_params;
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+
+       TEST_ASSERT(test_AES_CBC_HMAC_SHA512_decrypt_create_session_params(
+                       ut_params) == TEST_SUCCESS,
+                       "Failed to create session params");
+
+       /* Create Crypto session*/
+       ut_params->sess =
+               rte_cryptodev_sym_session_create(ts_params->valid_devs[0],
+                                               &ut_params->auth_xform);
+       TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+
+       return test_AES_CBC_HMAC_SHA512_decrypt_perform(ut_params->sess,
+                       ut_params, ts_params);
+}
+
+static int
+test_AES_CBC_HMAC_SHA512_decrypt_create_session_params(
+               struct crypto_unittest_params *ut_params)
+{
+
+       /* Setup Cipher Parameters */
+       ut_params->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+       ut_params->cipher_xform.next = NULL;
+
+       ut_params->cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_AES_CBC;
+       ut_params->cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_DECRYPT;
+       ut_params->cipher_xform.cipher.key.data = aes_cbc_key;
+       ut_params->cipher_xform.cipher.key.length = CIPHER_KEY_LENGTH_AES_CBC;
+
+       /* Setup HMAC Parameters */
+       ut_params->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+       ut_params->auth_xform.next = &ut_params->cipher_xform;
+
+       ut_params->auth_xform.auth.op = RTE_CRYPTO_AUTH_OP_VERIFY;
+       ut_params->auth_xform.auth.algo = RTE_CRYPTO_AUTH_SHA512_HMAC;
+       ut_params->auth_xform.auth.key.data = hmac_sha512_key;
+       ut_params->auth_xform.auth.key.length = HMAC_KEY_LENGTH_SHA512;
+       ut_params->auth_xform.auth.digest_length = DIGEST_BYTE_LENGTH_SHA512;
+
+       return TEST_SUCCESS;
+}
+
+
+static int
+test_AES_CBC_HMAC_SHA512_decrypt_perform(struct rte_cryptodev_sym_session *sess,
+               struct crypto_unittest_params *ut_params,
+               struct crypto_testsuite_params *ts_params)
+{
+       /* Generate test mbuf data and digest */
+       ut_params->ibuf = setup_test_string(ts_params->mbuf_pool,
+                       (const char *)
+                       catch_22_quote_2_512_bytes_AES_CBC_ciphertext,
+                       QUOTE_512_BYTES, 0);
+
+       ut_params->digest = (uint8_t *)rte_pktmbuf_append(ut_params->ibuf,
+                       DIGEST_BYTE_LENGTH_SHA512);
+       TEST_ASSERT_NOT_NULL(ut_params->digest, "no room to append digest");
+
+       rte_memcpy(ut_params->digest,
+                       catch_22_quote_2_512_bytes_AES_CBC_HMAC_SHA512_digest,
+                       DIGEST_BYTE_LENGTH_SHA512);
+
+       /* Generate Crypto op data structure */
+       ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+       TEST_ASSERT_NOT_NULL(ut_params->op,
+                       "Failed to allocate symmetric crypto operation struct");
+
+       rte_crypto_op_attach_sym_session(ut_params->op, sess);
+
+       struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+       /* set crypto operation source mbuf */
+       sym_op->m_src = ut_params->ibuf;
+
+       sym_op->auth.digest.data = ut_params->digest;
+       sym_op->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(
+                       ut_params->ibuf, QUOTE_512_BYTES);
+       sym_op->auth.digest.length = DIGEST_BYTE_LENGTH_SHA512;
+
+       sym_op->auth.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+       sym_op->auth.data.length = QUOTE_512_BYTES;
+
+       sym_op->cipher.iv.data = (uint8_t *)rte_pktmbuf_prepend(
+                       ut_params->ibuf, CIPHER_IV_LENGTH_AES_CBC);
+       sym_op->cipher.iv.phys_addr = rte_pktmbuf_mtophys_offset(
+                       ut_params->ibuf, 0);
+       sym_op->cipher.iv.length = CIPHER_IV_LENGTH_AES_CBC;
+
+       rte_memcpy(sym_op->cipher.iv.data, aes_cbc_iv,
+                       CIPHER_IV_LENGTH_AES_CBC);
+
+       sym_op->cipher.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+       sym_op->cipher.data.length = QUOTE_512_BYTES;
+
+       /* Process crypto operation */
+       TEST_ASSERT_NOT_NULL(process_crypto_request(ts_params->valid_devs[0],
+                       ut_params->op), "failed to process sym crypto op");
+
+       TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "crypto op processing failed");
+
+       ut_params->obuf = ut_params->op->sym->m_src;
+
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+                       rte_pktmbuf_mtod(ut_params->obuf, uint8_t *) +
+                       CIPHER_IV_LENGTH_AES_CBC, catch_22_quote,
+                       QUOTE_512_BYTES,
+                       "Plaintext data not as expected");
+
+       /* Validate obuf */
+       TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "Digest verification failed");
+
+       return TEST_SUCCESS;
+}
+
+/* ***** AES-CBC / HMAC-AES_XCBC Chain Tests ***** */
+
+static uint8_t aes_cbc_hmac_aes_xcbc_key[] = {
+       0x87, 0x61, 0x54, 0x53, 0xC4, 0x6D, 0xDD, 0x51,
+       0xE1, 0x9F, 0x86, 0x64, 0x39, 0x0A, 0xE6, 0x59
+       };
+
+static const uint8_t  catch_22_quote_2_512_bytes_HMAC_AES_XCBC_digest[] = {
+       0xE0, 0xAC, 0x9A, 0xC4, 0x22, 0x64, 0x35, 0x89,
+       0x77, 0x1D, 0x8B, 0x75
+       };
+
+static int
+test_AES_CBC_HMAC_AES_XCBC_encrypt_digest(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       /* Generate test mbuf data and space for digest */
+       ut_params->ibuf = setup_test_string(ts_params->mbuf_pool,
+                       catch_22_quote, QUOTE_512_BYTES, 0);
+
+       /* Setup Cipher Parameters */
+       ut_params->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+       ut_params->cipher_xform.next = &ut_params->auth_xform;
+
+       ut_params->cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_AES_CBC;
+       ut_params->cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
+       ut_params->cipher_xform.cipher.key.data = aes_cbc_key;
+       ut_params->cipher_xform.cipher.key.length = CIPHER_KEY_LENGTH_AES_CBC;
+
+       /* Setup HMAC Parameters */
+       ut_params->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+       ut_params->auth_xform.next = NULL;
+
+       ut_params->auth_xform.auth.op = RTE_CRYPTO_AUTH_OP_GENERATE;
+       ut_params->auth_xform.auth.algo = RTE_CRYPTO_AUTH_AES_XCBC_MAC;
+       ut_params->auth_xform.auth.key.length = AES_XCBC_MAC_KEY_SZ;
+       ut_params->auth_xform.auth.key.data = aes_cbc_hmac_aes_xcbc_key;
+       ut_params->auth_xform.auth.digest_length = DIGEST_BYTE_LENGTH_AES_XCBC;
+
+       /* Create Crypto session*/
+       ut_params->sess = rte_cryptodev_sym_session_create(
+                       ts_params->valid_devs[0],
+                       &ut_params->cipher_xform);
+       TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+
+       /* Generate Crypto op data structure */
+       ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+       TEST_ASSERT_NOT_NULL(ut_params->op,
+                       "Failed to allocate symmetric crypto operation struct");
+
+       rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+       struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+       /* set crypto operation source mbuf */
+       sym_op->m_src = ut_params->ibuf;
+
+       /* Set operation cipher parameters */
+       sym_op->cipher.iv.data = (uint8_t *)rte_pktmbuf_prepend(
+                       sym_op->m_src, CIPHER_IV_LENGTH_AES_CBC);
+       sym_op->cipher.iv.phys_addr = rte_pktmbuf_mtophys(sym_op->m_src);
+       sym_op->cipher.iv.length = CIPHER_IV_LENGTH_AES_CBC;
+
+       rte_memcpy(sym_op->cipher.iv.data, aes_cbc_iv,
+                       CIPHER_IV_LENGTH_AES_CBC);
+
+       sym_op->cipher.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+       sym_op->cipher.data.length = QUOTE_512_BYTES;
+
+       /* Set operation authentication parameters */
+       sym_op->auth.digest.data = (uint8_t *)rte_pktmbuf_append(
+                       sym_op->m_src, DIGEST_BYTE_LENGTH_AES_XCBC);
+       sym_op->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(
+                       sym_op->m_src,
+                       CIPHER_IV_LENGTH_AES_CBC + QUOTE_512_BYTES);
+       sym_op->auth.digest.length = DIGEST_BYTE_LENGTH_AES_XCBC;
+
+       memset(sym_op->auth.digest.data, 0, DIGEST_BYTE_LENGTH_AES_XCBC);
+
+       sym_op->auth.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+       sym_op->auth.data.length = QUOTE_512_BYTES;
+
+
+       /* Process crypto operation */
+       ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+                       ut_params->op);
+       TEST_ASSERT_NOT_NULL(ut_params->op, "failed to process sym crypto op");
+
+       TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "crypto op processing failed");
+
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+                       rte_pktmbuf_mtod_offset(ut_params->op->sym->m_src,
+                                       uint8_t *, CIPHER_IV_LENGTH_AES_CBC),
+                       catch_22_quote_2_512_bytes_AES_CBC_ciphertext,
+                       QUOTE_512_BYTES,
+                       "Ciphertext data not as expected");
+
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+                       rte_pktmbuf_mtod_offset(
+                                       ut_params->op->sym->m_src, uint8_t *,
+                                       CIPHER_IV_LENGTH_AES_CBC +
+                                       QUOTE_512_BYTES),
+                       catch_22_quote_2_512_bytes_HMAC_AES_XCBC_digest,
+                       DIGEST_BYTE_LENGTH_AES_XCBC,
+                       "Generated digest data not as expected");
+
+       return TEST_SUCCESS;
+}
+
+static int
+test_AES_CBC_HMAC_AES_XCBC_decrypt_digest_verify(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       /* Generate test mbuf data and space for digest */
+       ut_params->ibuf = setup_test_string(ts_params->mbuf_pool,
+               (const char *)catch_22_quote_2_512_bytes_AES_CBC_ciphertext,
+               QUOTE_512_BYTES, 0);
+
+       /* Setup Cipher Parameters */
+       ut_params->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+       ut_params->cipher_xform.next = NULL;
+
+       ut_params->cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_AES_CBC;
+       ut_params->cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_DECRYPT;
+       ut_params->cipher_xform.cipher.key.data = aes_cbc_key;
+       ut_params->cipher_xform.cipher.key.length = CIPHER_KEY_LENGTH_AES_CBC;
+
+       /* Setup HMAC Parameters */
+       ut_params->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+       ut_params->auth_xform.next = &ut_params->cipher_xform;
+
+       ut_params->auth_xform.auth.op = RTE_CRYPTO_AUTH_OP_VERIFY;
+       ut_params->auth_xform.auth.algo = RTE_CRYPTO_AUTH_AES_XCBC_MAC;
+       ut_params->auth_xform.auth.key.length = AES_XCBC_MAC_KEY_SZ;
+       ut_params->auth_xform.auth.key.data = aes_cbc_hmac_aes_xcbc_key;
+       ut_params->auth_xform.auth.digest_length = DIGEST_BYTE_LENGTH_AES_XCBC;
+
+       /* Create Crypto session*/
+       ut_params->sess =
+               rte_cryptodev_sym_session_create(ts_params->valid_devs[0],
+                                               &ut_params->auth_xform);
+       TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+
+       /* Generate Crypto op data structure */
+       ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+       TEST_ASSERT_NOT_NULL(ut_params->op,
+                       "Failed to allocate symmetric crypto operation struct");
+
+       /* Set crypto operation data parameters */
+       rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+       struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+       /* set crypto operation source mbuf */
+       sym_op->m_src = ut_params->ibuf;
+
+
+       sym_op->auth.digest.data = (uint8_t *)rte_pktmbuf_append(
+                               ut_params->ibuf, DIGEST_BYTE_LENGTH_AES_XCBC);
+       TEST_ASSERT_NOT_NULL(sym_op->auth.digest.data,
+                       "no room to append digest");
+
+       sym_op->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(
+                       ut_params->ibuf, QUOTE_512_BYTES);
+       sym_op->auth.digest.length = DIGEST_BYTE_LENGTH_AES_XCBC;
+
+       rte_memcpy(sym_op->auth.digest.data,
+                       catch_22_quote_2_512_bytes_HMAC_AES_XCBC_digest,
+                       DIGEST_BYTE_LENGTH_AES_XCBC);
+
+       sym_op->auth.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+       sym_op->auth.data.length = QUOTE_512_BYTES;
+
+       sym_op->cipher.iv.data = (uint8_t *)rte_pktmbuf_prepend(
+                       ut_params->ibuf, CIPHER_IV_LENGTH_AES_CBC);
+       sym_op->cipher.iv.phys_addr = rte_pktmbuf_mtophys(ut_params->ibuf);
+       sym_op->cipher.iv.length = CIPHER_IV_LENGTH_AES_CBC;
+
+       rte_memcpy(sym_op->cipher.iv.data, aes_cbc_iv,
+                       CIPHER_IV_LENGTH_AES_CBC);
+
+       sym_op->cipher.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+       sym_op->cipher.data.length = QUOTE_512_BYTES;
+
+       /* Process crypto operation */
+       TEST_ASSERT_NOT_NULL(process_crypto_request(ts_params->valid_devs[0],
+                       ut_params->op), "failed to process sym crypto op");
+
+       TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "crypto op processing failed");
+
+       ut_params->obuf = ut_params->op->sym->m_src;
+
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+                       rte_pktmbuf_mtod(ut_params->obuf, uint8_t *) +
+                       CIPHER_IV_LENGTH_AES_CBC, catch_22_quote,
+                       QUOTE_512_BYTES,
+                       "Ciphertext data not as expected");
+
+       TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "Digest verification failed");
+
+       return TEST_SUCCESS;
+}
+
+/* ***** Snow3G Tests ***** */
+static int
+create_snow3g_hash_session(uint8_t dev_id,
+       const uint8_t *key, const uint8_t key_len,
+       const uint8_t aad_len, const uint8_t auth_len,
+       enum rte_crypto_auth_operation op)
+{
+       uint8_t hash_key[key_len];
+
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       memcpy(hash_key, key, key_len);
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "key:", key, key_len);
+#endif
+       /* Setup Authentication Parameters */
+       ut_params->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+       ut_params->auth_xform.next = NULL;
+
+       ut_params->auth_xform.auth.op = op;
+       ut_params->auth_xform.auth.algo = RTE_CRYPTO_AUTH_SNOW3G_UIA2;
+       ut_params->auth_xform.auth.key.length = key_len;
+       ut_params->auth_xform.auth.key.data = hash_key;
+       ut_params->auth_xform.auth.digest_length = auth_len;
+       ut_params->auth_xform.auth.add_auth_data_length = aad_len;
+       ut_params->sess = rte_cryptodev_sym_session_create(dev_id,
+                               &ut_params->auth_xform);
+       TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+       return 0;
+}
+static int
+create_snow3g_cipher_session(uint8_t dev_id,
+                       enum rte_crypto_cipher_operation op,
+                       const uint8_t *key, const uint8_t key_len)
+{
+       uint8_t cipher_key[key_len];
+
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       memcpy(cipher_key, key, key_len);
+
+       /* Setup Cipher Parameters */
+       ut_params->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+       ut_params->cipher_xform.next = NULL;
+
+       ut_params->cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_SNOW3G_UEA2;
+       ut_params->cipher_xform.cipher.op = op;
+       ut_params->cipher_xform.cipher.key.data = cipher_key;
+       ut_params->cipher_xform.cipher.key.length = key_len;
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "key:", key, key_len);
+#endif
+       /* Create Crypto session */
+       ut_params->sess = rte_cryptodev_sym_session_create(dev_id,
+                                               &ut_params->
+                                               cipher_xform);
+       TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+       return 0;
+}
+
+static int
+create_snow3g_cipher_operation(const uint8_t *iv, const unsigned iv_len,
+                       const unsigned cipher_len,
+                       const unsigned cipher_offset)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+       unsigned iv_pad_len = 0;
+
+       /* Generate Crypto op data structure */
+       ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+                               RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+       TEST_ASSERT_NOT_NULL(ut_params->op,
+                               "Failed to allocate pktmbuf offload");
+
+       /* Set crypto operation data parameters */
+       rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+       struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+       /* set crypto operation source mbuf */
+       sym_op->m_src = ut_params->ibuf;
+
+       /* iv */
+       iv_pad_len = RTE_ALIGN_CEIL(iv_len, 16);
+       sym_op->cipher.iv.data = (uint8_t *)rte_pktmbuf_prepend(ut_params->ibuf
+                       , iv_pad_len);
+
+       TEST_ASSERT_NOT_NULL(sym_op->cipher.iv.data, "no room to prepend iv");
+
+       memset(sym_op->cipher.iv.data, 0, iv_pad_len);
+       sym_op->cipher.iv.phys_addr = rte_pktmbuf_mtophys(ut_params->ibuf);
+       sym_op->cipher.iv.length = iv_pad_len;
+
+       rte_memcpy(sym_op->cipher.iv.data, iv, iv_len);
+       sym_op->cipher.data.length = cipher_len;
+       sym_op->cipher.data.offset = cipher_offset;
+       return 0;
+}
+
+static int
+create_snow3g_cipher_operation_oop(const uint8_t *iv, const unsigned iv_len,
+                       const unsigned cipher_len,
+                       const unsigned cipher_offset)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+       unsigned iv_pad_len = 0;
+
+       /* Generate Crypto op data structure */
+       ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+                               RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+       TEST_ASSERT_NOT_NULL(ut_params->op,
+                               "Failed to allocate pktmbuf offload");
+
+       /* Set crypto operation data parameters */
+       rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+       struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+       /* set crypto operation source mbuf */
+       sym_op->m_src = ut_params->ibuf;
+       sym_op->m_dst = ut_params->obuf;
+
+       /* iv */
+       iv_pad_len = RTE_ALIGN_CEIL(iv_len, 16);
+       sym_op->cipher.iv.data = (uint8_t *)rte_pktmbuf_prepend(ut_params->ibuf
+                       , iv_pad_len);
+
+       TEST_ASSERT_NOT_NULL(sym_op->cipher.iv.data, "no room to prepend iv");
+
+       memset(sym_op->cipher.iv.data, 0, iv_pad_len);
+       sym_op->cipher.iv.phys_addr = rte_pktmbuf_mtophys(ut_params->ibuf);
+       sym_op->cipher.iv.length = iv_pad_len;
+
+       rte_memcpy(sym_op->cipher.iv.data, iv, iv_len);
+       sym_op->cipher.data.length = cipher_len;
+       sym_op->cipher.data.offset = cipher_offset;
+       return 0;
+}
+
+static int
+create_snow3g_cipher_auth_session(uint8_t dev_id,
+               enum rte_crypto_cipher_operation cipher_op,
+               enum rte_crypto_auth_operation auth_op,
+               const uint8_t *key, const uint8_t key_len,
+               const uint8_t aad_len, const uint8_t auth_len)
+{
+       uint8_t cipher_auth_key[key_len];
+
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       memcpy(cipher_auth_key, key, key_len);
+
+       /* Setup Authentication Parameters */
+       ut_params->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+       ut_params->auth_xform.next = NULL;
+
+       ut_params->auth_xform.auth.op = auth_op;
+       ut_params->auth_xform.auth.algo = RTE_CRYPTO_AUTH_SNOW3G_UIA2;
+       ut_params->auth_xform.auth.key.length = key_len;
+       /* Hash key = cipher key */
+       ut_params->auth_xform.auth.key.data = cipher_auth_key;
+       ut_params->auth_xform.auth.digest_length = auth_len;
+       ut_params->auth_xform.auth.add_auth_data_length = aad_len;
+
+       /* Setup Cipher Parameters */
+       ut_params->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+       ut_params->cipher_xform.next = &ut_params->auth_xform;
+
+       ut_params->cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_SNOW3G_UEA2;
+       ut_params->cipher_xform.cipher.op = cipher_op;
+       ut_params->cipher_xform.cipher.key.data = cipher_auth_key;
+       ut_params->cipher_xform.cipher.key.length = key_len;
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "key:", key, key_len);
+#endif
+       /* Create Crypto session*/
+       ut_params->sess = rte_cryptodev_sym_session_create(dev_id,
+                               &ut_params->cipher_xform);
+
+       TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+       return 0;
+}
+
+static int
+create_snow3g_auth_cipher_session(uint8_t dev_id,
+               enum rte_crypto_cipher_operation cipher_op,
+               enum rte_crypto_auth_operation auth_op,
+               const uint8_t *key, const uint8_t key_len,
+               const uint8_t aad_len, const uint8_t auth_len)
+       {
+       uint8_t auth_cipher_key[key_len];
+
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       memcpy(auth_cipher_key, key, key_len);
+
+       /* Setup Authentication Parameters */
+       ut_params->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+       ut_params->auth_xform.auth.op = auth_op;
+       ut_params->auth_xform.next = &ut_params->cipher_xform;
+       ut_params->auth_xform.auth.algo = RTE_CRYPTO_AUTH_SNOW3G_UIA2;
+       ut_params->auth_xform.auth.key.length = key_len;
+       ut_params->auth_xform.auth.key.data = auth_cipher_key;
+       ut_params->auth_xform.auth.digest_length = auth_len;
+       ut_params->auth_xform.auth.add_auth_data_length = aad_len;
+
+       /* Setup Cipher Parameters */
+       ut_params->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+       ut_params->cipher_xform.next = NULL;
+       ut_params->cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_SNOW3G_UEA2;
+       ut_params->cipher_xform.cipher.op = cipher_op;
+       ut_params->cipher_xform.cipher.key.data = auth_cipher_key;
+       ut_params->cipher_xform.cipher.key.length = key_len;
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "key:", key, key_len);
+#endif
+       /* Create Crypto session*/
+       ut_params->sess = rte_cryptodev_sym_session_create(dev_id,
+                               &ut_params->auth_xform);
+
+       TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+
+       return 0;
+}
+
+static int
+create_snow3g_hash_operation(const uint8_t *auth_tag,
+               const unsigned auth_tag_len,
+               const uint8_t *aad, const unsigned aad_len,
+               unsigned data_pad_len,
+               enum rte_crypto_auth_operation op,
+               const unsigned auth_len, const unsigned auth_offset)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       unsigned aad_buffer_len;
+
+       /* Generate Crypto op data structure */
+       ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+       TEST_ASSERT_NOT_NULL(ut_params->op,
+               "Failed to allocate pktmbuf offload");
+
+       /* Set crypto operation data parameters */
+       rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+       struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+       /* set crypto operation source mbuf */
+       sym_op->m_src = ut_params->ibuf;
+
+       /* aad */
+       /*
+       * Always allocate the aad up to the block size.
+       * The cryptodev API calls out -
+       *  - the array must be big enough to hold the AAD, plus any
+       *   space to round this up to the nearest multiple of the
+       *   block size (16 bytes).
+       */
+       aad_buffer_len = ALIGN_POW2_ROUNDUP(aad_len, 16);
+       sym_op->auth.aad.data = (uint8_t *)rte_pktmbuf_prepend(
+                       ut_params->ibuf, aad_buffer_len);
+       TEST_ASSERT_NOT_NULL(sym_op->auth.aad.data,
+                                       "no room to prepend aad");
+       sym_op->auth.aad.phys_addr = rte_pktmbuf_mtophys(
+                       ut_params->ibuf);
+       sym_op->auth.aad.length = aad_len;
+
+       memset(sym_op->auth.aad.data, 0, aad_buffer_len);
+       rte_memcpy(sym_op->auth.aad.data, aad, aad_len);
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "aad:",
+                       sym_op->auth.aad.data, aad_len);
+#endif
+
+       /* digest */
+       sym_op->auth.digest.data = (uint8_t *)rte_pktmbuf_append(
+                                       ut_params->ibuf, auth_tag_len);
+
+       TEST_ASSERT_NOT_NULL(sym_op->auth.digest.data,
+                               "no room to append auth tag");
+       ut_params->digest = sym_op->auth.digest.data;
+       sym_op->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(
+                       ut_params->ibuf, data_pad_len + aad_len);
+       sym_op->auth.digest.length = auth_tag_len;
+       if (op == RTE_CRYPTO_AUTH_OP_GENERATE)
+               memset(sym_op->auth.digest.data, 0, auth_tag_len);
+       else
+               rte_memcpy(sym_op->auth.digest.data, auth_tag, auth_tag_len);
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "digest:",
+               sym_op->auth.digest.data,
+               sym_op->auth.digest.length);
+#endif
+
+       sym_op->auth.data.length = auth_len;
+       sym_op->auth.data.offset = auth_offset;
+
+       return 0;
+}
+
+static int
+create_snow3g_cipher_hash_operation(const uint8_t *auth_tag,
+               const unsigned auth_tag_len,
+               const uint8_t *aad, const uint8_t aad_len,
+               unsigned data_pad_len,
+               enum rte_crypto_auth_operation op,
+               const uint8_t *iv, const uint8_t iv_len,
+               const unsigned cipher_len, const unsigned cipher_offset,
+               const unsigned auth_len, const unsigned auth_offset)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       unsigned iv_pad_len = 0;
+       unsigned aad_buffer_len;
+
+       /* Generate Crypto op data structure */
+       ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+       TEST_ASSERT_NOT_NULL(ut_params->op,
+                       "Failed to allocate pktmbuf offload");
+       /* Set crypto operation data parameters */
+       rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+       struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+       /* set crypto operation source mbuf */
+       sym_op->m_src = ut_params->ibuf;
+
+
+       /* iv */
+       iv_pad_len = RTE_ALIGN_CEIL(iv_len, 16);
+
+       sym_op->cipher.iv.data = (uint8_t *)rte_pktmbuf_prepend(
+               ut_params->ibuf, iv_pad_len);
+       TEST_ASSERT_NOT_NULL(sym_op->cipher.iv.data, "no room to prepend iv");
+
+       memset(sym_op->cipher.iv.data, 0, iv_pad_len);
+       sym_op->cipher.iv.phys_addr = rte_pktmbuf_mtophys(ut_params->ibuf);
+       sym_op->cipher.iv.length = iv_pad_len;
+
+       rte_memcpy(sym_op->cipher.iv.data, iv, iv_len);
+
+       sym_op->cipher.data.length = cipher_len;
+       sym_op->cipher.data.offset = cipher_offset;
+
+       /* aad */
+       /*
+       * Always allocate the aad up to the block size.
+       * The cryptodev API calls out -
+       *  - the array must be big enough to hold the AAD, plus any
+       *   space to round this up to the nearest multiple of the
+       *   block size (16 bytes).
+       */
+       aad_buffer_len = ALIGN_POW2_ROUNDUP(aad_len, 16);
+
+       sym_op->auth.aad.data =
+                       (uint8_t *)rte_pktmbuf_mtod(ut_params->ibuf, uint8_t *);
+       TEST_ASSERT_NOT_NULL(sym_op->auth.aad.data,
+                       "no room to prepend aad");
+       sym_op->auth.aad.phys_addr = rte_pktmbuf_mtophys(
+                       ut_params->ibuf);
+       sym_op->auth.aad.length = aad_len;
+
+       memset(sym_op->auth.aad.data, 0, aad_buffer_len);
+       rte_memcpy(sym_op->auth.aad.data, aad, aad_len);
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "aad:",
+                       sym_op->auth.aad.data, aad_len);
+#endif
+
+       /* digest */
+       sym_op->auth.digest.data = (uint8_t *)rte_pktmbuf_append(
+                       ut_params->ibuf, auth_tag_len);
+
+       TEST_ASSERT_NOT_NULL(sym_op->auth.digest.data,
+                       "no room to append auth tag");
+       ut_params->digest = sym_op->auth.digest.data;
+       sym_op->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(
+                       ut_params->ibuf, data_pad_len + aad_len);
+       sym_op->auth.digest.length = auth_tag_len;
+       if (op == RTE_CRYPTO_AUTH_OP_GENERATE)
+               memset(sym_op->auth.digest.data, 0, auth_tag_len);
+       else
+               rte_memcpy(sym_op->auth.digest.data, auth_tag, auth_tag_len);
+
+       #ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "digest:",
+               sym_op->auth.digest.data,
+               sym_op->auth.digest.length);
+       #endif
+
+       sym_op->auth.data.length = auth_len;
+       sym_op->auth.data.offset = auth_offset;
+
+       return 0;
+}
+
+static int
+create_snow3g_auth_cipher_operation(const unsigned auth_tag_len,
+               const uint8_t *iv, const uint8_t iv_len,
+               const uint8_t *aad, const uint8_t aad_len,
+               unsigned data_pad_len,
+               const unsigned cipher_len, const unsigned cipher_offset,
+               const unsigned auth_len, const unsigned auth_offset)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       unsigned iv_pad_len = 0;
+       unsigned aad_buffer_len = 0;
+
+       /* Generate Crypto op data structure */
+       ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+       TEST_ASSERT_NOT_NULL(ut_params->op,
+                       "Failed to allocate pktmbuf offload");
+
+       /* Set crypto operation data parameters */
+       rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+       struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+       /* set crypto operation source mbuf */
+       sym_op->m_src = ut_params->ibuf;
+
+       /* digest */
+       sym_op->auth.digest.data = (uint8_t *)rte_pktmbuf_append(
+                       ut_params->ibuf, auth_tag_len);
+
+       TEST_ASSERT_NOT_NULL(sym_op->auth.digest.data,
+                       "no room to append auth tag");
+
+       sym_op->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(
+                       ut_params->ibuf, data_pad_len);
+       sym_op->auth.digest.length = auth_tag_len;
+
+       memset(sym_op->auth.digest.data, 0, auth_tag_len);
+
+       #ifdef RTE_APP_TEST_DEBUG
+               rte_hexdump(stdout, "digest:",
+                       sym_op->auth.digest.data,
+                       sym_op->auth.digest.length);
+       #endif
+       /* iv */
+       iv_pad_len = RTE_ALIGN_CEIL(iv_len, 16);
+
+       sym_op->cipher.iv.data = (uint8_t *)rte_pktmbuf_prepend(
+               ut_params->ibuf, iv_pad_len);
+       TEST_ASSERT_NOT_NULL(sym_op->cipher.iv.data, "no room to prepend iv");
+
+       memset(sym_op->cipher.iv.data, 0, iv_pad_len);
+       sym_op->cipher.iv.phys_addr = rte_pktmbuf_mtophys(ut_params->ibuf);
+       sym_op->cipher.iv.length = iv_pad_len;
+
+       rte_memcpy(sym_op->cipher.iv.data, iv, iv_len);
+
+       /* aad */
+       /*
+       * Always allocate the aad up to the block size.
+       * The cryptodev API calls out -
+       *  - the array must be big enough to hold the AAD, plus any
+       *   space to round this up to the nearest multiple of the
+       *   block size (16 bytes).
+       */
+       aad_buffer_len = ALIGN_POW2_ROUNDUP(aad_len, 16);
+
+       sym_op->auth.aad.data = (uint8_t *)rte_pktmbuf_prepend(
+       ut_params->ibuf, aad_buffer_len);
+       TEST_ASSERT_NOT_NULL(sym_op->auth.aad.data,
+                               "no room to prepend aad");
+       sym_op->auth.aad.phys_addr = rte_pktmbuf_mtophys(
+                               ut_params->ibuf);
+       sym_op->auth.aad.length = aad_len;
+
+       memset(sym_op->auth.aad.data, 0, aad_buffer_len);
+       rte_memcpy(sym_op->auth.aad.data, aad, aad_len);
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "aad:",
+                       sym_op->auth.aad.data, aad_len);
+#endif
+
+       sym_op->cipher.data.length = cipher_len;
+       sym_op->cipher.data.offset = auth_offset + cipher_offset;
+
+       sym_op->auth.data.length = auth_len;
+       sym_op->auth.data.offset = auth_offset + cipher_offset;
+
+       return 0;
+}
+
+static int
+test_snow3g_authentication(const struct snow3g_hash_test_data *tdata)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       int retval;
+       unsigned plaintext_pad_len;
+       uint8_t *plaintext;
+
+       /* Create SNOW3G session */
+       retval = create_snow3g_hash_session(ts_params->valid_devs[0],
+                       tdata->key.data, tdata->key.len,
+                       tdata->aad.len, tdata->digest.len,
+                       RTE_CRYPTO_AUTH_OP_GENERATE);
+       if (retval < 0)
+               return retval;
+
+       /* alloc mbuf and set payload */
+       ut_params->ibuf = rte_pktmbuf_alloc(ts_params->mbuf_pool);
+
+       memset(rte_pktmbuf_mtod(ut_params->ibuf, uint8_t *), 0,
+       rte_pktmbuf_tailroom(ut_params->ibuf));
+
+       /* Append data which is padded to a multiple of */
+       /* the algorithms block size */
+       plaintext_pad_len = tdata->plaintext.len >> 3;
+       plaintext = (uint8_t *)rte_pktmbuf_append(ut_params->ibuf,
+                               plaintext_pad_len);
+       memcpy(plaintext, tdata->plaintext.data, tdata->plaintext.len >> 3);
+
+       /* Create SNOW3G opertaion */
+       retval = create_snow3g_hash_operation(NULL, tdata->digest.len,
+                       tdata->aad.data, tdata->aad.len,
+                       plaintext_pad_len, RTE_CRYPTO_AUTH_OP_GENERATE,
+                       tdata->validAuthLenInBits.len,
+                       tdata->validAuthOffsetLenInBits.len);
+       if (retval < 0)
+               return retval;
+
+       ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+                               ut_params->op);
+       ut_params->obuf = ut_params->op->sym->m_src;
+       TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
+       ut_params->digest = rte_pktmbuf_mtod(ut_params->obuf, uint8_t *)
+                       + plaintext_pad_len + tdata->aad.len;
+
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+       ut_params->digest,
+       tdata->digest.data,
+       DIGEST_BYTE_LENGTH_SNOW3G_UIA2,
+       "Snow3G Generated auth tag not as expected");
+
+       return 0;
+}
+
+static int
+test_snow3g_authentication_verify(const struct snow3g_hash_test_data *tdata)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       int retval;
+       unsigned plaintext_pad_len;
+       uint8_t *plaintext;
+
+       /* Create SNOW3G session */
+       retval = create_snow3g_hash_session(ts_params->valid_devs[0],
+                               tdata->key.data, tdata->key.len,
+                               tdata->aad.len, tdata->digest.len,
+                               RTE_CRYPTO_AUTH_OP_VERIFY);
+       if (retval < 0)
+               return retval;
+       /* alloc mbuf and set payload */
+       ut_params->ibuf = rte_pktmbuf_alloc(ts_params->mbuf_pool);
+
+       memset(rte_pktmbuf_mtod(ut_params->ibuf, uint8_t *), 0,
+       rte_pktmbuf_tailroom(ut_params->ibuf));
+
+       /* Append data which is padded to a multiple */
+       /* of the algorithms block size */
+       plaintext_pad_len = tdata->plaintext.len >> 3;
+       plaintext = (uint8_t *)rte_pktmbuf_append(ut_params->ibuf,
+                                       plaintext_pad_len);
+       memcpy(plaintext, tdata->plaintext.data, tdata->plaintext.len >> 3);
+
+       /* Create SNOW3G operation */
+       retval = create_snow3g_hash_operation(tdata->digest.data,
+                       tdata->digest.len,
+                       tdata->aad.data, tdata->aad.len,
+                       plaintext_pad_len,
+                       RTE_CRYPTO_AUTH_OP_VERIFY,
+                       tdata->validAuthLenInBits.len,
+                       tdata->validAuthOffsetLenInBits.len);
+       if (retval < 0)
+               return retval;
+
+       ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+                               ut_params->op);
+       TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
+       ut_params->obuf = ut_params->op->sym->m_src;
+       ut_params->digest = rte_pktmbuf_mtod(ut_params->obuf, uint8_t *)
+                               + plaintext_pad_len + tdata->aad.len;
+
+       /* Validate obuf */
+       if (ut_params->op->status == RTE_CRYPTO_OP_STATUS_SUCCESS)
+               return 0;
+       else
+               return -1;
+
+       return 0;
+}
+
+
+static int
+test_snow3g_hash_generate_test_case_1(void)
+{
+       return test_snow3g_authentication(&snow3g_hash_test_case_1);
+}
+
+static int
+test_snow3g_hash_generate_test_case_2(void)
+{
+       return test_snow3g_authentication(&snow3g_hash_test_case_2);
+}
+
+static int
+test_snow3g_hash_generate_test_case_3(void)
+{
+       return test_snow3g_authentication(&snow3g_hash_test_case_3);
+}
+
+static int
+test_snow3g_hash_verify_test_case_1(void)
+{
+       return test_snow3g_authentication_verify(&snow3g_hash_test_case_1);
+
+}
+
+static int
+test_snow3g_hash_verify_test_case_2(void)
+{
+       return test_snow3g_authentication_verify(&snow3g_hash_test_case_2);
+}
+
+static int
+test_snow3g_hash_verify_test_case_3(void)
+{
+       return test_snow3g_authentication_verify(&snow3g_hash_test_case_3);
+}
+
+static int
+test_snow3g_encryption(const struct snow3g_test_data *tdata)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       int retval;
+       uint8_t *plaintext, *ciphertext;
+       uint8_t plaintext_pad_len;
+       uint8_t lastByteValidBits = 8;
+       uint8_t lastByteMask = 0xFF;
+
+       /* Create SNOW3G session */
+       retval = create_snow3g_cipher_session(ts_params->valid_devs[0],
+                                       RTE_CRYPTO_CIPHER_OP_ENCRYPT,
+                                       tdata->key.data, tdata->key.len);
+       if (retval < 0)
+               return retval;
+
+       ut_params->ibuf = rte_pktmbuf_alloc(ts_params->mbuf_pool);
+
+       /* Clear mbuf payload */
+       memset(rte_pktmbuf_mtod(ut_params->ibuf, uint8_t *), 0,
+              rte_pktmbuf_tailroom(ut_params->ibuf));
+
+       /*
+        * Append data which is padded to a
+        * multiple of the algorithms block size
+        */
+       /*tdata->plaintext.len = tdata->plaintext.len >> 3;*/
+       plaintext_pad_len = RTE_ALIGN_CEIL((tdata->plaintext.len >> 3), 16);
+
+       plaintext = (uint8_t *) rte_pktmbuf_append(ut_params->ibuf,
+                                               plaintext_pad_len);
+       memcpy(plaintext, tdata->plaintext.data, (tdata->plaintext.len >> 3));
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "plaintext:", plaintext, tdata->plaintext.len);
+#endif
+       /* Create SNOW3G operation */
+       retval = create_snow3g_cipher_operation(tdata->iv.data, tdata->iv.len,
+                                       tdata->validCipherLenInBits.len,
+                                       tdata->validCipherOffsetLenInBits.len);
+       if (retval < 0)
+               return retval;
+
+       ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+                                               ut_params->op);
+       TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
+
+       ut_params->obuf = ut_params->op->sym->m_dst;
+       if (ut_params->obuf)
+               ciphertext = rte_pktmbuf_mtod(ut_params->obuf, uint8_t *)
+                               + tdata->iv.len;
+       else
+               ciphertext = plaintext;
+
+       lastByteValidBits = (tdata->validDataLenInBits.len % 8);
+       if (lastByteValidBits == 0)
+               lastByteValidBits = 8;
+       lastByteMask = lastByteMask << (8 - lastByteValidBits);
+       (*(ciphertext + (tdata->ciphertext.len >> 3) - 1)) &= lastByteMask;
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "ciphertext:", ciphertext, tdata->ciphertext.len);
+#endif
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+               ciphertext,
+               tdata->ciphertext.data,
+               tdata->ciphertext.len >> 3,
+               "Snow3G Ciphertext data not as expected");
+       return 0;
+}
+
+
+static int
+test_snow3g_encryption_oop(const struct snow3g_test_data *tdata)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+       uint8_t *plaintext, *ciphertext;
+
+       int retval;
+       uint8_t plaintext_pad_len;
+       uint8_t lastByteValidBits = 8;
+       uint8_t lastByteMask = 0xFF;
+
+       /* Create SNOW3G session */
+       retval = create_snow3g_cipher_session(ts_params->valid_devs[0],
+                                       RTE_CRYPTO_CIPHER_OP_ENCRYPT,
+                                       tdata->key.data, tdata->key.len);
+       if (retval < 0)
+               return retval;
+
+       ut_params->ibuf = rte_pktmbuf_alloc(ts_params->mbuf_pool);
+       ut_params->obuf = rte_pktmbuf_alloc(ts_params->mbuf_pool);
+
+       TEST_ASSERT_NOT_NULL(ut_params->ibuf,
+                       "Failed to allocate input buffer in mempool");
+       TEST_ASSERT_NOT_NULL(ut_params->obuf,
+                       "Failed to allocate output buffer in mempool");
+
+       /* Clear mbuf payload */
+       memset(rte_pktmbuf_mtod(ut_params->ibuf, uint8_t *), 0,
+              rte_pktmbuf_tailroom(ut_params->ibuf));
+
+       /*
+        * Append data which is padded to a
+        * multiple of the algorithms block size
+        */
+       /*tdata->plaintext.len = tdata->plaintext.len >> 3;*/
+       plaintext_pad_len = RTE_ALIGN_CEIL((tdata->plaintext.len >> 3), 16);
+
+       plaintext = (uint8_t *) rte_pktmbuf_append(ut_params->ibuf,
+                                               plaintext_pad_len);
+
+       rte_pktmbuf_append(ut_params->obuf,
+                                               plaintext_pad_len);
+
+       memcpy(plaintext, tdata->plaintext.data, (tdata->plaintext.len >> 3));
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "plaintext:", plaintext, tdata->plaintext.len);
+#endif
+       /* Create SNOW3G operation */
+       retval = create_snow3g_cipher_operation_oop(tdata->iv.data,
+                                       tdata->iv.len,
+                                       tdata->validCipherLenInBits.len,
+                                       tdata->validCipherOffsetLenInBits.len);
+       if (retval < 0)
+               return retval;
+
+       ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+                                               ut_params->op);
+       TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
+
+       ut_params->obuf = ut_params->op->sym->m_dst;
+       if (ut_params->obuf)
+               ciphertext = rte_pktmbuf_mtod(ut_params->obuf, uint8_t *)
+                               + tdata->iv.len;
+       else
+               ciphertext = plaintext;
+
+       lastByteValidBits = (tdata->validDataLenInBits.len % 8);
+       if (lastByteValidBits == 0)
+               lastByteValidBits = 8;
+       lastByteMask = lastByteMask << (8 - lastByteValidBits);
+       (*(ciphertext + (tdata->ciphertext.len >> 3) - 1)) &= lastByteMask;
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "ciphertext:", ciphertext, tdata->ciphertext.len);
+#endif
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+               ciphertext,
+               tdata->ciphertext.data,
+               tdata->ciphertext.len >> 3,
+               "Snow3G Ciphertext data not as expected");
+       return 0;
+}
+
+
+static int test_snow3g_decryption(const struct snow3g_test_data *tdata)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       int retval;
+
+       uint8_t *plaintext, *ciphertext;
+       uint8_t ciphertext_pad_len;
+       uint8_t lastByteValidBits = 8;
+       uint8_t lastByteMask = 0xFF;
+
+       /* Create SNOW3G session */
+       retval = create_snow3g_cipher_session(ts_params->valid_devs[0],
+                                       RTE_CRYPTO_CIPHER_OP_DECRYPT,
+                                       tdata->key.data, tdata->key.len);
+       if (retval < 0)
+               return retval;
+
+       ut_params->ibuf = rte_pktmbuf_alloc(ts_params->mbuf_pool);
+
+       /* Clear mbuf payload */
+       memset(rte_pktmbuf_mtod(ut_params->ibuf, uint8_t *), 0,
+              rte_pktmbuf_tailroom(ut_params->ibuf));
+
+       /*
+        * Append data which is padded to a
+        * multiple of the algorithms block size
+        */
+       ciphertext_pad_len = RTE_ALIGN_CEIL((tdata->ciphertext.len >> 3), 16);
+
+       ciphertext = (uint8_t *) rte_pktmbuf_append(ut_params->ibuf,
+                                               ciphertext_pad_len);
+       memcpy(ciphertext, tdata->ciphertext.data, tdata->ciphertext.len >> 3);
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "ciphertext:", ciphertext, tdata->ciphertext.len);
+#endif
+       /* Create SNOW3G operation */
+       retval = create_snow3g_cipher_operation(tdata->iv.data, tdata->iv.len,
+                                       tdata->validCipherLenInBits.len,
+                                       tdata->validCipherOffsetLenInBits.len);
+       if (retval < 0)
+               return retval;
+
+       ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+                                               ut_params->op);
+       TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
+       ut_params->obuf = ut_params->op->sym->m_src;
+       if (ut_params->obuf)
+               plaintext = rte_pktmbuf_mtod(ut_params->obuf, uint8_t *)
+                               + tdata->iv.len;
+       else
+               plaintext = ciphertext;
+       lastByteValidBits = (tdata->validDataLenInBits.len  % 8);
+       if (lastByteValidBits == 0)
+               lastByteValidBits = 8;
+       lastByteMask = lastByteMask << (8 - lastByteValidBits);
+       (*(ciphertext + (tdata->ciphertext.len >> 3) - 1)) &= lastByteMask;
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "plaintext:", plaintext, tdata->plaintext.len);
+#endif
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(plaintext,
+                               tdata->plaintext.data,
+                               tdata->plaintext.len >> 3,
+                               "Snow3G Plaintext data not as expected");
+       return 0;
+}
+
+static int test_snow3g_decryption_oop(const struct snow3g_test_data *tdata)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       int retval;
+
+       uint8_t *plaintext, *ciphertext;
+       uint8_t ciphertext_pad_len;
+       uint8_t lastByteValidBits = 8;
+       uint8_t lastByteMask = 0xFF;
+
+       /* Create SNOW3G session */
+       retval = create_snow3g_cipher_session(ts_params->valid_devs[0],
+                                       RTE_CRYPTO_CIPHER_OP_DECRYPT,
+                                       tdata->key.data, tdata->key.len);
+       if (retval < 0)
+               return retval;
+
+       ut_params->ibuf = rte_pktmbuf_alloc(ts_params->mbuf_pool);
+       ut_params->obuf = rte_pktmbuf_alloc(ts_params->mbuf_pool);
+
+       TEST_ASSERT_NOT_NULL(ut_params->ibuf,
+                       "Failed to allocate input buffer");
+       TEST_ASSERT_NOT_NULL(ut_params->obuf,
+                       "Failed to allocate output buffer");
+
+       /* Clear mbuf payload */
+       memset(rte_pktmbuf_mtod(ut_params->ibuf, uint8_t *), 0,
+              rte_pktmbuf_tailroom(ut_params->ibuf));
+
+       memset(rte_pktmbuf_mtod(ut_params->obuf, uint8_t *), 0,
+                      rte_pktmbuf_tailroom(ut_params->obuf));
+
+       /*
+        * Append data which is padded to a
+        * multiple of the algorithms block size
+        */
+       ciphertext_pad_len = RTE_ALIGN_CEIL((tdata->ciphertext.len >> 3), 16);
+
+       ciphertext = (uint8_t *) rte_pktmbuf_append(ut_params->ibuf,
+                                               ciphertext_pad_len);
+
+       rte_pktmbuf_append(ut_params->obuf,
+                                               ciphertext_pad_len);
+
+       memcpy(ciphertext, tdata->ciphertext.data, tdata->ciphertext.len >> 3);
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "ciphertext:", ciphertext, tdata->ciphertext.len);
+#endif
+       /* Create SNOW3G operation */
+       retval = create_snow3g_cipher_operation_oop(tdata->iv.data,
+                                       tdata->iv.len,
+                                       tdata->validCipherLenInBits.len,
+                                       tdata->validCipherOffsetLenInBits.len);
+       if (retval < 0)
+               return retval;
+
+       ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+                                               ut_params->op);
+       TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
+       ut_params->obuf = ut_params->op->sym->m_dst;
+       if (ut_params->obuf)
+               plaintext = rte_pktmbuf_mtod(ut_params->obuf, uint8_t *)
+                               + tdata->iv.len;
+       else
+               plaintext = ciphertext;
+       lastByteValidBits = (tdata->validDataLenInBits.len  % 8);
+       if (lastByteValidBits == 0)
+               lastByteValidBits = 8;
+       lastByteMask = lastByteMask << (8 - lastByteValidBits);
+       (*(plaintext + (tdata->ciphertext.len >> 3) - 1)) &= lastByteMask;
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "plaintext:", plaintext, tdata->plaintext.len);
+#endif
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(plaintext,
+                               tdata->plaintext.data,
+                               tdata->plaintext.len >> 3,
+                               "Snow3G Plaintext data not as expected");
+       return 0;
+}
+
+static int
+test_snow3g_authenticated_encryption(const struct snow3g_test_data *tdata)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       int retval;
+
+       uint8_t *plaintext, *ciphertext;
+       uint8_t plaintext_pad_len;
+       uint8_t lastByteValidBits = 8;
+       uint8_t lastByteMask = 0xFF;
+
+       /* Create SNOW3G session */
+       retval = create_snow3g_cipher_auth_session(ts_params->valid_devs[0],
+                       RTE_CRYPTO_CIPHER_OP_ENCRYPT,
+                       RTE_CRYPTO_AUTH_OP_GENERATE,
+                       tdata->key.data, tdata->key.len,
+                       tdata->aad.len, tdata->digest.len);
+       if (retval < 0)
+               return retval;
+       ut_params->ibuf = rte_pktmbuf_alloc(ts_params->mbuf_pool);
+
+       /* clear mbuf payload */
+       memset(rte_pktmbuf_mtod(ut_params->ibuf, uint8_t *), 0,
+                       rte_pktmbuf_tailroom(ut_params->ibuf));
+
+       /* Append data which is padded to a multiple */
+       /*  of the algorithms block size */
+       plaintext_pad_len = tdata->plaintext.len >> 3;
+
+       plaintext = (uint8_t *)rte_pktmbuf_append(ut_params->ibuf,
+                       plaintext_pad_len);
+       memcpy(plaintext, tdata->plaintext.data, tdata->plaintext.len >> 3);
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "plaintext:", plaintext, tdata->plaintext.len);
+#endif
+
+       /* Create SNOW3G operation */
+       retval = create_snow3g_cipher_hash_operation(tdata->digest.data,
+                       tdata->digest.len, tdata->aad.data,
+                       tdata->aad.len, /*tdata->plaintext.len,*/
+                       plaintext_pad_len, RTE_CRYPTO_AUTH_OP_GENERATE,
+                       tdata->iv.data, tdata->iv.len,
+                       tdata->validCipherLenInBits.len,
+                       tdata->validCipherOffsetLenInBits.len,
+                       tdata->validAuthLenInBits.len,
+                       tdata->validAuthOffsetLenInBits.len);
+       if (retval < 0)
+               return retval;
+
+       ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+                       ut_params->op);
+       TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
+       ut_params->obuf = ut_params->op->sym->m_src;
+       if (ut_params->obuf)
+               ciphertext = rte_pktmbuf_mtod(ut_params->obuf, uint8_t *)
+                               + tdata->iv.len;
+       else
+               ciphertext = plaintext;
+       lastByteValidBits = (tdata->validDataLenInBits.len % 8);
+       if (lastByteValidBits == 0)
+               lastByteValidBits = 8;
+       lastByteMask = lastByteMask << (8-lastByteValidBits);
+       (*(ciphertext + (tdata->ciphertext.len >> 3) - 1)) &= lastByteMask;
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "ciphertext:", ciphertext, tdata->ciphertext.len);
+#endif
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+                       ciphertext,
+                       tdata->ciphertext.data,
+                       tdata->ciphertext.len >> 3,
+                       "Snow3G Ciphertext data not as expected");
+
+       ut_params->digest = rte_pktmbuf_mtod(ut_params->obuf, uint8_t *)
+           + plaintext_pad_len + tdata->aad.len;
+
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+                       ut_params->digest,
+                       tdata->digest.data,
+                       DIGEST_BYTE_LENGTH_SNOW3G_UIA2,
+                       "Snow3G Generated auth tag not as expected");
+       return 0;
+}
+static int
+test_snow3g_encrypted_authentication(const struct snow3g_test_data *tdata)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       int retval;
+
+       uint8_t *plaintext, *ciphertext;
+       uint8_t plaintext_pad_len;
+       uint8_t lastByteValidBits = 8;
+       uint8_t lastByteMask = 0xFF;
+
+       /* Create SNOW3G session */
+       retval = create_snow3g_auth_cipher_session(ts_params->valid_devs[0],
+                       RTE_CRYPTO_CIPHER_OP_ENCRYPT,
+                       RTE_CRYPTO_AUTH_OP_GENERATE,
+                       tdata->key.data, tdata->key.len,
+                       tdata->aad.len, tdata->digest.len);
+       if (retval < 0)
+               return retval;
+
+       ut_params->ibuf = rte_pktmbuf_alloc(ts_params->mbuf_pool);
+
+       /* clear mbuf payload */
+       memset(rte_pktmbuf_mtod(ut_params->ibuf, uint8_t *), 0,
+                       rte_pktmbuf_tailroom(ut_params->ibuf));
+
+       /* Append data which is padded to a multiple */
+       /* of the algorithms block size */
+       plaintext_pad_len = RTE_ALIGN_CEIL((tdata->plaintext.len >> 3), 8);
+
+       plaintext = (uint8_t *)rte_pktmbuf_append(ut_params->ibuf,
+                       plaintext_pad_len);
+       memcpy(plaintext, tdata->plaintext.data, tdata->plaintext.len >> 3);
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "plaintext:", plaintext, tdata->plaintext.len);
+#endif
+
+       /* Create SNOW3G operation */
+       retval = create_snow3g_auth_cipher_operation(
+               tdata->digest.len,
+               tdata->iv.data, tdata->iv.len,
+               tdata->aad.data, tdata->aad.len,
+               plaintext_pad_len,
+               tdata->validCipherLenInBits.len,
+               tdata->validCipherOffsetLenInBits.len,
+               tdata->validAuthLenInBits.len,
+               tdata->validAuthOffsetLenInBits.len
+       );
+
+       if (retval < 0)
+               return retval;
+
+       ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+                       ut_params->op);
+       TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
+       ut_params->obuf = ut_params->op->sym->m_src;
+       if (ut_params->obuf)
+               ciphertext = rte_pktmbuf_mtod(ut_params->obuf, uint8_t *)
+                               + tdata->aad.len + tdata->iv.len;
+       else
+               ciphertext = plaintext;
+
+       lastByteValidBits = (tdata->validDataLenInBits.len % 8);
+       if (lastByteValidBits == 0)
+               lastByteValidBits = 8;
+       lastByteMask = lastByteMask << (8-lastByteValidBits);
+       (*(ciphertext + (tdata->ciphertext.len >> 3) - 1)) &= lastByteMask;
+       ut_params->digest = rte_pktmbuf_mtod(ut_params->obuf, uint8_t *)
+                       + plaintext_pad_len + tdata->aad.len + tdata->iv.len;
+       #ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "ciphertext:", ciphertext, tdata->ciphertext.len);
+#endif
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+               ciphertext,
+               tdata->ciphertext.data,
+               tdata->ciphertext.len >> 3,
+               "Snow3G Ciphertext data not as expected");
+
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+               ut_params->digest,
+               tdata->digest.data,
+               DIGEST_BYTE_LENGTH_SNOW3G_UIA2,
+               "Snow3G Generated auth tag not as expected");
+       return 0;
+}
+
+static int
+test_snow3g_encryption_test_case_1(void)
+{
+       return test_snow3g_encryption(&snow3g_test_case_1);
+}
+
+static int
+test_snow3g_encryption_test_case_1_oop(void)
+{
+       return test_snow3g_encryption_oop(&snow3g_test_case_1);
+}
+
+static int
+test_snow3g_encryption_test_case_2(void)
+{
+       return test_snow3g_encryption(&snow3g_test_case_2);
+}
+
+static int
+test_snow3g_encryption_test_case_3(void)
+{
+       return test_snow3g_encryption(&snow3g_test_case_3);
+}
+
+static int
+test_snow3g_encryption_test_case_4(void)
+{
+       return test_snow3g_encryption(&snow3g_test_case_4);
+}
+
+static int
+test_snow3g_encryption_test_case_5(void)
+{
+       return test_snow3g_encryption(&snow3g_test_case_5);
+}
+
+static int
+test_snow3g_decryption_test_case_1(void)
+{
+       return test_snow3g_decryption(&snow3g_test_case_1);
+}
+
+static int
+test_snow3g_decryption_test_case_1_oop(void)
+{
+       return test_snow3g_decryption_oop(&snow3g_test_case_1);
+}
+
+static int
+test_snow3g_decryption_test_case_2(void)
+{
+       return test_snow3g_decryption(&snow3g_test_case_2);
+}
+
+static int
+test_snow3g_decryption_test_case_3(void)
+{
+       return test_snow3g_decryption(&snow3g_test_case_3);
+}
+
+static int
+test_snow3g_decryption_test_case_4(void)
+{
+       return test_snow3g_decryption(&snow3g_test_case_4);
+}
+
+static int
+test_snow3g_decryption_test_case_5(void)
+{
+       return test_snow3g_decryption(&snow3g_test_case_5);
+}
+static int
+test_snow3g_authenticated_encryption_test_case_1(void)
+{
+       return test_snow3g_authenticated_encryption(&snow3g_test_case_3);
+}
+
+static int
+test_snow3g_encrypted_authentication_test_case_1(void)
+{
+       return test_snow3g_encrypted_authentication(&snow3g_test_case_6);
+}
+
+/* ***** AES-GCM Tests ***** */
+
+static int
+create_gcm_session(uint8_t dev_id, enum rte_crypto_cipher_operation op,
+               const uint8_t *key, const uint8_t key_len,
+               const uint8_t aad_len, const uint8_t auth_len)
+{
+       uint8_t cipher_key[key_len];
+
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+
+       memcpy(cipher_key, key, key_len);
+
+       /* Setup Cipher Parameters */
+       ut_params->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+       ut_params->cipher_xform.next = NULL;
+
+       ut_params->cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_AES_GCM;
+       ut_params->cipher_xform.cipher.op = op;
+       ut_params->cipher_xform.cipher.key.data = cipher_key;
+       ut_params->cipher_xform.cipher.key.length = key_len;
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "key:", key, key_len);
+#endif
+       /* Setup Authentication Parameters */
+       ut_params->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+       ut_params->auth_xform.next = NULL;
+
+       ut_params->auth_xform.auth.algo = RTE_CRYPTO_AUTH_AES_GCM;
+
+       ut_params->auth_xform.auth.digest_length = auth_len;
+       ut_params->auth_xform.auth.add_auth_data_length = aad_len;
+       ut_params->auth_xform.auth.key.length = 0;
+       ut_params->auth_xform.auth.key.data = NULL;
+
+       if (op == RTE_CRYPTO_CIPHER_OP_ENCRYPT) {
+               ut_params->cipher_xform.next = &ut_params->auth_xform;
+
+               /* Create Crypto session*/
+               ut_params->sess = rte_cryptodev_sym_session_create(dev_id,
+                               &ut_params->cipher_xform);
+       } else {/* Create Crypto session*/
+               ut_params->auth_xform.next = &ut_params->cipher_xform;
+               ut_params->sess = rte_cryptodev_sym_session_create(dev_id,
+                               &ut_params->auth_xform);
+       }
+
+       TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+
+       return 0;
+}
+
+static int
+create_gcm_operation(enum rte_crypto_cipher_operation op,
+               const uint8_t *auth_tag, const unsigned auth_tag_len,
+               const uint8_t *iv, const unsigned iv_len,
+               const uint8_t *aad, const unsigned aad_len,
+               const unsigned data_len, unsigned data_pad_len)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       unsigned iv_pad_len = 0, aad_buffer_len;
+
+       /* Generate Crypto op data structure */
+       ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+       TEST_ASSERT_NOT_NULL(ut_params->op,
+                       "Failed to allocate symmetric crypto operation struct");
+
+       struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+
+
+       sym_op->auth.digest.data = (uint8_t *)rte_pktmbuf_append(
+                       ut_params->ibuf, auth_tag_len);
+       TEST_ASSERT_NOT_NULL(sym_op->auth.digest.data,
+                       "no room to append digest");
+       sym_op->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(
+                       ut_params->ibuf, data_pad_len);
+       sym_op->auth.digest.length = auth_tag_len;
+
+       if (op == RTE_CRYPTO_CIPHER_OP_DECRYPT) {
+               rte_memcpy(sym_op->auth.digest.data, auth_tag, auth_tag_len);
+#ifdef RTE_APP_TEST_DEBUG
+               rte_hexdump(stdout, "digest:",
+                               ut_params->op->digest.data,
+                               ut_params->op->digest.length);
+#endif
+       }
+
+       /* iv */
+       iv_pad_len = RTE_ALIGN_CEIL(iv_len, 16);
+
+       sym_op->cipher.iv.data = (uint8_t *)rte_pktmbuf_prepend(
+                       ut_params->ibuf, iv_pad_len);
+       TEST_ASSERT_NOT_NULL(sym_op->cipher.iv.data, "no room to prepend iv");
+
+       memset(sym_op->cipher.iv.data, 0, iv_pad_len);
+       sym_op->cipher.iv.phys_addr = rte_pktmbuf_mtophys(ut_params->ibuf);
+       sym_op->cipher.iv.length = iv_pad_len;
+
+       rte_memcpy(sym_op->cipher.iv.data, iv, iv_len);
+
+       /* CalcY0 */
+       if (iv_len != 16)
+               sym_op->cipher.iv.data[15] = 1;
+
+       /*
+        * Always allocate the aad up to the block size.
+        * The cryptodev API calls out -
+        *  - the array must be big enough to hold the AAD, plus any
+        *   space to round this up to the nearest multiple of the
+        *   block size (16 bytes).
+        */
+       aad_buffer_len = ALIGN_POW2_ROUNDUP(aad_len, 16);
+
+       sym_op->auth.aad.data = (uint8_t *)rte_pktmbuf_prepend(
+                       ut_params->ibuf, aad_buffer_len);
+       TEST_ASSERT_NOT_NULL(sym_op->auth.aad.data,
+                       "no room to prepend aad");
+       sym_op->auth.aad.phys_addr = rte_pktmbuf_mtophys(
+                       ut_params->ibuf);
+       sym_op->auth.aad.length = aad_len;
+
+       memset(sym_op->auth.aad.data, 0, aad_buffer_len);
+       rte_memcpy(sym_op->auth.aad.data, aad, aad_len);
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "iv:", ut_params->op->iv.data, iv_pad_len);
+       rte_hexdump(stdout, "aad:",
+                       ut_params->op->additional_auth.data, aad_len);
+#endif
+       sym_op->cipher.data.length = data_len;
+       sym_op->cipher.data.offset = aad_buffer_len + iv_pad_len;
+
+       sym_op->auth.data.offset = aad_buffer_len + iv_pad_len;
+       sym_op->auth.data.length = data_len;
+
+       return 0;
+}
+
+static int
+test_mb_AES_GCM_authenticated_encryption(const struct gcm_test_data *tdata)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       int retval;
+
+       uint8_t *plaintext, *ciphertext, *auth_tag;
+       uint16_t plaintext_pad_len;
+
+       /* Create GCM session */
+       retval = create_gcm_session(ts_params->valid_devs[0],
+                       RTE_CRYPTO_CIPHER_OP_ENCRYPT,
+                       tdata->key.data, tdata->key.len,
+                       tdata->aad.len, tdata->auth_tag.len);
+       if (retval < 0)
+               return retval;
+
+
+       ut_params->ibuf = rte_pktmbuf_alloc(ts_params->mbuf_pool);
+
+       /* clear mbuf payload */
+       memset(rte_pktmbuf_mtod(ut_params->ibuf, uint8_t *), 0,
+                       rte_pktmbuf_tailroom(ut_params->ibuf));
+
+       /*
+        * Append data which is padded to a multiple
+        * of the algorithms block size
+        */
+       plaintext_pad_len = RTE_ALIGN_CEIL(tdata->plaintext.len, 16);
+
+       plaintext = (uint8_t *)rte_pktmbuf_append(ut_params->ibuf,
+                       plaintext_pad_len);
+       memcpy(plaintext, tdata->plaintext.data, tdata->plaintext.len);
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "plaintext:", plaintext, tdata->plaintext.len);
+#endif
+       /* Create GCM opertaion */
+       retval = create_gcm_operation(RTE_CRYPTO_CIPHER_OP_ENCRYPT,
+                       tdata->auth_tag.data, tdata->auth_tag.len,
+                       tdata->iv.data, tdata->iv.len,
+                       tdata->aad.data, tdata->aad.len,
+                       tdata->plaintext.len, plaintext_pad_len);
+       if (retval < 0)
+               return retval;
+
+       rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+       ut_params->op->sym->m_src = ut_params->ibuf;
+
+       /* Process crypto operation */
+       TEST_ASSERT_NOT_NULL(process_crypto_request(ts_params->valid_devs[0],
+                       ut_params->op), "failed to process sym crypto op");
+
+       TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "crypto op processing failed");
+
+       if (ut_params->op->sym->m_dst) {
+               ciphertext = rte_pktmbuf_mtod(ut_params->op->sym->m_dst,
+                               uint8_t *);
+               auth_tag = rte_pktmbuf_mtod_offset(ut_params->op->sym->m_dst,
+                               uint8_t *, plaintext_pad_len);
+       } else {
+               ciphertext = plaintext;
+               auth_tag = plaintext + plaintext_pad_len;
+       }
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "ciphertext:", ciphertext, tdata->ciphertext.len);
+       rte_hexdump(stdout, "auth tag:", auth_tag, tdata->auth_tag.len);
+#endif
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+                       ciphertext,
+                       tdata->ciphertext.data,
+                       tdata->ciphertext.len,
+                       "GCM Ciphertext data not as expected");
+
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+                       auth_tag,
+                       tdata->auth_tag.data,
+                       tdata->auth_tag.len,
+                       "GCM Generated auth tag not as expected");
+
+       return 0;
+
+}
+
+static int
+test_mb_AES_GCM_authenticated_encryption_test_case_1(void)
+{
+       return test_mb_AES_GCM_authenticated_encryption(&gcm_test_case_1);
+}
+
+static int
+test_mb_AES_GCM_authenticated_encryption_test_case_2(void)
+{
+       return test_mb_AES_GCM_authenticated_encryption(&gcm_test_case_2);
+}
+
+static int
+test_mb_AES_GCM_authenticated_encryption_test_case_3(void)
+{
+       return test_mb_AES_GCM_authenticated_encryption(&gcm_test_case_3);
+}
+
+static int
+test_mb_AES_GCM_authenticated_encryption_test_case_4(void)
+{
+       return test_mb_AES_GCM_authenticated_encryption(&gcm_test_case_4);
+}
+
+static int
+test_mb_AES_GCM_authenticated_encryption_test_case_5(void)
+{
+       return test_mb_AES_GCM_authenticated_encryption(&gcm_test_case_5);
+}
+
+static int
+test_mb_AES_GCM_authenticated_encryption_test_case_6(void)
+{
+       return test_mb_AES_GCM_authenticated_encryption(&gcm_test_case_6);
+}
+
+static int
+test_mb_AES_GCM_authenticated_encryption_test_case_7(void)
+{
+       return test_mb_AES_GCM_authenticated_encryption(&gcm_test_case_7);
+}
+
+static int
+test_mb_AES_GCM_authenticated_decryption(const struct gcm_test_data *tdata)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       int retval;
+
+       uint8_t *plaintext, *ciphertext;
+       uint16_t ciphertext_pad_len;
+
+       /* Create GCM session */
+       retval = create_gcm_session(ts_params->valid_devs[0],
+                       RTE_CRYPTO_CIPHER_OP_DECRYPT,
+                       tdata->key.data, tdata->key.len,
+                       tdata->aad.len, tdata->auth_tag.len);
+       if (retval < 0)
+               return retval;
+
+
+       /* alloc mbuf and set payload */
+       ut_params->ibuf = rte_pktmbuf_alloc(ts_params->mbuf_pool);
+
+       memset(rte_pktmbuf_mtod(ut_params->ibuf, uint8_t *), 0,
+                       rte_pktmbuf_tailroom(ut_params->ibuf));
+
+       ciphertext_pad_len = RTE_ALIGN_CEIL(tdata->ciphertext.len, 16);
+
+       ciphertext = (uint8_t *)rte_pktmbuf_append(ut_params->ibuf,
+                       ciphertext_pad_len);
+       memcpy(ciphertext, tdata->ciphertext.data, tdata->ciphertext.len);
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "ciphertext:", ciphertext, tdata->ciphertext.len);
+#endif
+       /* Create GCM opertaion */
+       retval = create_gcm_operation(RTE_CRYPTO_CIPHER_OP_DECRYPT,
+                       tdata->auth_tag.data, tdata->auth_tag.len,
+                       tdata->iv.data, tdata->iv.len,
+                       tdata->aad.data, tdata->aad.len,
+                       tdata->ciphertext.len, ciphertext_pad_len);
+       if (retval < 0)
+               return retval;
+
+
+       rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+       ut_params->op->sym->m_src = ut_params->ibuf;
+
+       /* Process crypto operation */
+       TEST_ASSERT_NOT_NULL(process_crypto_request(ts_params->valid_devs[0],
+                       ut_params->op), "failed to process sym crypto op");
+
+       TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "crypto op processing failed");
+
+       if (ut_params->op->sym->m_dst)
+               plaintext = rte_pktmbuf_mtod(ut_params->op->sym->m_dst,
+                               uint8_t *);
+       else
+               plaintext = ciphertext;
+
+#ifdef RTE_APP_TEST_DEBUG
+       rte_hexdump(stdout, "plaintext:", plaintext, tdata->ciphertext.len);
+#endif
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+                       plaintext,
+                       tdata->plaintext.data,
+                       tdata->plaintext.len,
+                       "GCM plaintext data not as expected");
+
+       TEST_ASSERT_EQUAL(ut_params->op->status,
+                       RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "GCM authentication failed");
+       return 0;
+}
+
+static int
+test_mb_AES_GCM_authenticated_decryption_test_case_1(void)
+{
+       return test_mb_AES_GCM_authenticated_decryption(&gcm_test_case_1);
+}
+
+static int
+test_mb_AES_GCM_authenticated_decryption_test_case_2(void)
+{
+       return test_mb_AES_GCM_authenticated_decryption(&gcm_test_case_2);
+}
+
+static int
+test_mb_AES_GCM_authenticated_decryption_test_case_3(void)
+{
+       return test_mb_AES_GCM_authenticated_decryption(&gcm_test_case_3);
+}
+
+static int
+test_mb_AES_GCM_authenticated_decryption_test_case_4(void)
+{
+       return test_mb_AES_GCM_authenticated_decryption(&gcm_test_case_4);
+}
+
+static int
+test_mb_AES_GCM_authenticated_decryption_test_case_5(void)
+{
+       return test_mb_AES_GCM_authenticated_decryption(&gcm_test_case_5);
+}
+
+static int
+test_mb_AES_GCM_authenticated_decryption_test_case_6(void)
+{
+       return test_mb_AES_GCM_authenticated_decryption(&gcm_test_case_6);
+}
+
+static int
+test_mb_AES_GCM_authenticated_decryption_test_case_7(void)
+{
+       return test_mb_AES_GCM_authenticated_decryption(&gcm_test_case_7);
+}
+
+static int
+test_stats(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct rte_cryptodev_stats stats;
+       struct rte_cryptodev *dev;
+       cryptodev_stats_get_t temp_pfn;
+
+       rte_cryptodev_stats_reset(ts_params->valid_devs[0]);
+       TEST_ASSERT((rte_cryptodev_stats_get(ts_params->valid_devs[0] + 600,
+                       &stats) == -ENODEV),
+               "rte_cryptodev_stats_get invalid dev failed");
+       TEST_ASSERT((rte_cryptodev_stats_get(ts_params->valid_devs[0], 0) != 0),
+               "rte_cryptodev_stats_get invalid Param failed");
+       dev = &rte_cryptodevs[ts_params->valid_devs[0]];
+       temp_pfn = dev->dev_ops->stats_get;
+       dev->dev_ops->stats_get = (cryptodev_stats_get_t)0;
+       TEST_ASSERT((rte_cryptodev_stats_get(ts_params->valid_devs[0], &stats)
+                       == -ENOTSUP),
+               "rte_cryptodev_stats_get invalid Param failed");
+       dev->dev_ops->stats_get = temp_pfn;
+
+       /* Test expected values */
+       ut_setup();
+       test_AES_CBC_HMAC_SHA1_encrypt_digest();
+       ut_teardown();
+       TEST_ASSERT_SUCCESS(rte_cryptodev_stats_get(ts_params->valid_devs[0],
+                       &stats),
+               "rte_cryptodev_stats_get failed");
+       TEST_ASSERT((stats.enqueued_count == 1),
+               "rte_cryptodev_stats_get returned unexpected enqueued stat");
+       TEST_ASSERT((stats.dequeued_count == 1),
+               "rte_cryptodev_stats_get returned unexpected enqueued stat");
+       TEST_ASSERT((stats.enqueue_err_count == 0),
+               "rte_cryptodev_stats_get returned unexpected enqueued stat");
+       TEST_ASSERT((stats.dequeue_err_count == 0),
+               "rte_cryptodev_stats_get returned unexpected enqueued stat");
+
+       /* invalid device but should ignore and not reset device stats*/
+       rte_cryptodev_stats_reset(ts_params->valid_devs[0] + 300);
+       TEST_ASSERT_SUCCESS(rte_cryptodev_stats_get(ts_params->valid_devs[0],
+                       &stats),
+               "rte_cryptodev_stats_get failed");
+       TEST_ASSERT((stats.enqueued_count == 1),
+               "rte_cryptodev_stats_get returned unexpected enqueued stat");
+
+       /* check that a valid reset clears stats */
+       rte_cryptodev_stats_reset(ts_params->valid_devs[0]);
+       TEST_ASSERT_SUCCESS(rte_cryptodev_stats_get(ts_params->valid_devs[0],
+                       &stats),
+                                         "rte_cryptodev_stats_get failed");
+       TEST_ASSERT((stats.enqueued_count == 0),
+               "rte_cryptodev_stats_get returned unexpected enqueued stat");
+       TEST_ASSERT((stats.dequeued_count == 0),
+               "rte_cryptodev_stats_get returned unexpected enqueued stat");
+
+       return TEST_SUCCESS;
+}
+
+
+static int
+test_multi_session(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       struct rte_cryptodev_info dev_info;
+       struct rte_cryptodev_sym_session **sessions;
+
+       uint16_t i;
+
+       test_AES_CBC_HMAC_SHA512_decrypt_create_session_params(ut_params);
+
+
+       rte_cryptodev_info_get(ts_params->valid_devs[0], &dev_info);
+
+       sessions = rte_malloc(NULL,
+                       (sizeof(struct rte_cryptodev_sym_session *) *
+                       dev_info.sym.max_nb_sessions) + 1, 0);
+
+       /* Create multiple crypto sessions*/
+       for (i = 0; i < dev_info.sym.max_nb_sessions; i++) {
+               sessions[i] = rte_cryptodev_sym_session_create(
+                               ts_params->valid_devs[0],
+                       &ut_params->auth_xform);
+               TEST_ASSERT_NOT_NULL(sessions[i],
+                               "Session creation failed at session number %u",
+                               i);
+
+               /* Attempt to send a request on each session */
+               TEST_ASSERT_SUCCESS(test_AES_CBC_HMAC_SHA512_decrypt_perform(
+                               sessions[i], ut_params, ts_params),
+                               "Failed to perform decrypt on request "
+                               "number %u.", i);
+               /* free crypto operation structure */
+               if (ut_params->op)
+                       rte_crypto_op_free(ut_params->op);
+
+               /*
+                * free mbuf - both obuf and ibuf are usually the same,
+                * but rte copes even if we call free twice
+                */
+               if (ut_params->obuf) {
+                       rte_pktmbuf_free(ut_params->obuf);
+                       ut_params->obuf = 0;
+               }
+       }
+
+       /* Next session create should fail */
+       sessions[i] = rte_cryptodev_sym_session_create(ts_params->valid_devs[0],
+                       &ut_params->auth_xform);
+       TEST_ASSERT_NULL(sessions[i],
+                       "Session creation succeeded unexpectedly!");
+
+       for (i = 0; i < dev_info.sym.max_nb_sessions; i++)
+               rte_cryptodev_sym_session_free(ts_params->valid_devs[0],
+                               sessions[i]);
+
+       rte_free(sessions);
+
+       return TEST_SUCCESS;
+}
+
+static int
+test_not_in_place_crypto(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+       struct rte_mbuf *dst_m = rte_pktmbuf_alloc(ts_params->mbuf_pool);
+
+       test_AES_CBC_HMAC_SHA512_decrypt_create_session_params(ut_params);
+
+       /* Create multiple crypto sessions*/
+
+       ut_params->sess = rte_cryptodev_sym_session_create(
+                       ts_params->valid_devs[0], &ut_params->auth_xform);
+
+       TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+
+
+       /* Generate test mbuf data and digest */
+       ut_params->ibuf = setup_test_string(ts_params->mbuf_pool,
+                       (const char *)
+                       catch_22_quote_2_512_bytes_AES_CBC_ciphertext,
+                       QUOTE_512_BYTES, 0);
+
+       ut_params->digest = (uint8_t *)rte_pktmbuf_append(ut_params->ibuf,
+                       DIGEST_BYTE_LENGTH_SHA512);
+       TEST_ASSERT_NOT_NULL(ut_params->digest, "no room to append digest");
+
+       rte_memcpy(ut_params->digest,
+                       catch_22_quote_2_512_bytes_AES_CBC_HMAC_SHA512_digest,
+                       DIGEST_BYTE_LENGTH_SHA512);
+
+       /* Generate Crypto op data structure */
+       ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+       TEST_ASSERT_NOT_NULL(ut_params->op,
+                       "Failed to allocate symmetric crypto operation struct");
+
+
+       /* Set crypto operation data parameters */
+       rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+       struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+       /* set crypto operation source mbuf */
+       sym_op->m_src = ut_params->ibuf;
+       sym_op->m_dst = dst_m;
+
+       sym_op->auth.digest.data = ut_params->digest;
+       sym_op->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(
+                       ut_params->ibuf, QUOTE_512_BYTES);
+       sym_op->auth.digest.length = DIGEST_BYTE_LENGTH_SHA512;
+
+       sym_op->auth.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+       sym_op->auth.data.length = QUOTE_512_BYTES;
+
+
+       sym_op->cipher.iv.data = (uint8_t *)rte_pktmbuf_prepend(
+                       ut_params->ibuf, CIPHER_IV_LENGTH_AES_CBC);
+       sym_op->cipher.iv.phys_addr = rte_pktmbuf_mtophys_offset(
+                       ut_params->ibuf, 0);
+       sym_op->cipher.iv.length = CIPHER_IV_LENGTH_AES_CBC;
+
+       rte_memcpy(sym_op->cipher.iv.data, aes_cbc_iv,
+                       CIPHER_IV_LENGTH_AES_CBC);
+
+       sym_op->cipher.data.offset = CIPHER_IV_LENGTH_AES_CBC;
+       sym_op->cipher.data.length = QUOTE_512_BYTES;
+
+       /* Process crypto operation */
+       ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+                       ut_params->op);
+       TEST_ASSERT_NOT_NULL(ut_params->op, "no crypto operation returned");
+
+       TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "crypto operation processing failed");
+
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+                       rte_pktmbuf_mtod(ut_params->op->sym->m_dst, char *),
+                       catch_22_quote,
+                       QUOTE_512_BYTES,
+                       "Plaintext data not as expected");
+
+       return TEST_SUCCESS;
+}
+
+static int
+test_null_cipher_only_operation(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       /* Generate test mbuf data and space for digest */
+       ut_params->ibuf = setup_test_string(ts_params->mbuf_pool,
+                       catch_22_quote, QUOTE_512_BYTES, 0);
+
+       /* Setup Cipher Parameters */
+       ut_params->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+       ut_params->cipher_xform.next = NULL;
+
+       ut_params->cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_NULL;
+       ut_params->cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
+
+       /* Create Crypto session*/
+       ut_params->sess = rte_cryptodev_sym_session_create(
+                       ts_params->valid_devs[0], &ut_params->cipher_xform);
+       TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+
+       /* Generate Crypto op data structure */
+       ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+       TEST_ASSERT_NOT_NULL(ut_params->op,
+                       "Failed to allocate symmetric crypto operation struct");
+
+       /* Set crypto operation data parameters */
+       rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+       struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+       /* set crypto operation source mbuf */
+       sym_op->m_src = ut_params->ibuf;
+
+       sym_op->cipher.data.offset = 0;
+       sym_op->cipher.data.length = QUOTE_512_BYTES;
+
+       /* Process crypto operation */
+       ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+                       ut_params->op);
+       TEST_ASSERT_NOT_NULL(ut_params->op, "no crypto operation returned");
+
+       TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "crypto operation processing failed");
+
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+                       rte_pktmbuf_mtod(ut_params->op->sym->m_src, uint8_t *),
+                       catch_22_quote,
+                       QUOTE_512_BYTES,
+                       "Ciphertext data not as expected");
+
+       return TEST_SUCCESS;
+}
+
+static int
+test_null_auth_only_operation(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       /* Generate test mbuf data and space for digest */
+       ut_params->ibuf = setup_test_string(ts_params->mbuf_pool,
+                       catch_22_quote, QUOTE_512_BYTES, 0);
+
+       /* Setup HMAC Parameters */
+       ut_params->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+       ut_params->auth_xform.next = NULL;
+
+       ut_params->auth_xform.auth.algo = RTE_CRYPTO_AUTH_NULL;
+       ut_params->auth_xform.auth.op = RTE_CRYPTO_AUTH_OP_GENERATE;
+
+       /* Create Crypto session*/
+       ut_params->sess = rte_cryptodev_sym_session_create(
+                       ts_params->valid_devs[0], &ut_params->auth_xform);
+       TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+
+       /* Generate Crypto op data structure */
+       ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+       TEST_ASSERT_NOT_NULL(ut_params->op,
+                       "Failed to allocate symmetric crypto operation struct");
+
+       /* Set crypto operation data parameters */
+       rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+       struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+       sym_op->m_src = ut_params->ibuf;
+
+       sym_op->auth.data.offset = 0;
+       sym_op->auth.data.length = QUOTE_512_BYTES;
+
+       /* Process crypto operation */
+       ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+                       ut_params->op);
+       TEST_ASSERT_NOT_NULL(ut_params->op, "no crypto operation returned");
+
+       TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "crypto operation processing failed");
+
+       return TEST_SUCCESS;
+}
+
+static int
+test_null_cipher_auth_operation(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       /* Generate test mbuf data and space for digest */
+       ut_params->ibuf = setup_test_string(ts_params->mbuf_pool,
+                       catch_22_quote, QUOTE_512_BYTES, 0);
+
+       /* Setup Cipher Parameters */
+       ut_params->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+       ut_params->cipher_xform.next = &ut_params->auth_xform;
+
+       ut_params->cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_NULL;
+       ut_params->cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
+
+       /* Setup HMAC Parameters */
+       ut_params->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+       ut_params->auth_xform.next = NULL;
+
+       ut_params->auth_xform.auth.algo = RTE_CRYPTO_AUTH_NULL;
+       ut_params->auth_xform.auth.op = RTE_CRYPTO_AUTH_OP_GENERATE;
+
+       /* Create Crypto session*/
+       ut_params->sess = rte_cryptodev_sym_session_create(
+                       ts_params->valid_devs[0], &ut_params->cipher_xform);
+       TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+
+       /* Generate Crypto op data structure */
+       ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+       TEST_ASSERT_NOT_NULL(ut_params->op,
+                       "Failed to allocate symmetric crypto operation struct");
+
+       /* Set crypto operation data parameters */
+       rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+       struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+       sym_op->m_src = ut_params->ibuf;
+
+       sym_op->cipher.data.offset = 0;
+       sym_op->cipher.data.length = QUOTE_512_BYTES;
+
+       sym_op->auth.data.offset = 0;
+       sym_op->auth.data.length = QUOTE_512_BYTES;
+
+       /* Process crypto operation */
+       ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+                       ut_params->op);
+       TEST_ASSERT_NOT_NULL(ut_params->op, "no crypto operation returned");
+
+       TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "crypto operation processing failed");
+
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+                       rte_pktmbuf_mtod(ut_params->op->sym->m_src, uint8_t *),
+                       catch_22_quote,
+                       QUOTE_512_BYTES,
+                       "Ciphertext data not as expected");
+
+       return TEST_SUCCESS;
+}
+
+static int
+test_null_auth_cipher_operation(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       /* Generate test mbuf data and space for digest */
+       ut_params->ibuf = setup_test_string(ts_params->mbuf_pool,
+                       catch_22_quote, QUOTE_512_BYTES, 0);
+
+       /* Setup Cipher Parameters */
+       ut_params->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+       ut_params->cipher_xform.next = NULL;
+
+       ut_params->cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_NULL;
+       ut_params->cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
+
+       /* Setup HMAC Parameters */
+       ut_params->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+       ut_params->auth_xform.next = &ut_params->cipher_xform;
+
+       ut_params->auth_xform.auth.algo = RTE_CRYPTO_AUTH_NULL;
+       ut_params->auth_xform.auth.op = RTE_CRYPTO_AUTH_OP_GENERATE;
+
+       /* Create Crypto session*/
+       ut_params->sess = rte_cryptodev_sym_session_create(
+                       ts_params->valid_devs[0], &ut_params->cipher_xform);
+       TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+
+       /* Generate Crypto op data structure */
+       ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+       TEST_ASSERT_NOT_NULL(ut_params->op,
+                       "Failed to allocate symmetric crypto operation struct");
+
+       /* Set crypto operation data parameters */
+       rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+       struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+       sym_op->m_src = ut_params->ibuf;
+
+       sym_op->cipher.data.offset = 0;
+       sym_op->cipher.data.length = QUOTE_512_BYTES;
+
+       sym_op->auth.data.offset = 0;
+       sym_op->auth.data.length = QUOTE_512_BYTES;
+
+       /* Process crypto operation */
+       ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+                       ut_params->op);
+       TEST_ASSERT_NOT_NULL(ut_params->op, "no crypto operation returned");
+
+       TEST_ASSERT_EQUAL(ut_params->op->status, RTE_CRYPTO_OP_STATUS_SUCCESS,
+                       "crypto operation processing failed");
+
+       /* Validate obuf */
+       TEST_ASSERT_BUFFERS_ARE_EQUAL(
+                       rte_pktmbuf_mtod(ut_params->op->sym->m_src, uint8_t *),
+                       catch_22_quote,
+                       QUOTE_512_BYTES,
+                       "Ciphertext data not as expected");
+
+       return TEST_SUCCESS;
+}
+
+
+static int
+test_null_invalid_operation(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       /* Setup Cipher Parameters */
+       ut_params->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+       ut_params->cipher_xform.next = NULL;
+
+       ut_params->cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_AES_CBC;
+       ut_params->cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
+
+       /* Create Crypto session*/
+       ut_params->sess = rte_cryptodev_sym_session_create(
+                       ts_params->valid_devs[0], &ut_params->cipher_xform);
+       TEST_ASSERT_NULL(ut_params->sess,
+                       "Session creation succeeded unexpectedly");
+
+
+       /* Setup HMAC Parameters */
+       ut_params->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+       ut_params->auth_xform.next = NULL;
+
+       ut_params->auth_xform.auth.algo = RTE_CRYPTO_AUTH_SHA1_HMAC;
+       ut_params->auth_xform.auth.op = RTE_CRYPTO_AUTH_OP_GENERATE;
+
+       /* Create Crypto session*/
+       ut_params->sess = rte_cryptodev_sym_session_create(
+                       ts_params->valid_devs[0], &ut_params->auth_xform);
+       TEST_ASSERT_NULL(ut_params->sess,
+                       "Session creation succeeded unexpectedly");
+
+       return TEST_SUCCESS;
+}
+
+
+#define NULL_BURST_LENGTH (32)
+
+static int
+test_null_burst_operation(void)
+{
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+       struct crypto_unittest_params *ut_params = &unittest_params;
+
+       unsigned i, burst_len = NULL_BURST_LENGTH;
+
+       struct rte_crypto_op *burst[NULL_BURST_LENGTH] = { NULL };
+       struct rte_crypto_op *burst_dequeued[NULL_BURST_LENGTH] = { NULL };
+
+       /* Setup Cipher Parameters */
+       ut_params->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+       ut_params->cipher_xform.next = &ut_params->auth_xform;
+
+       ut_params->cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_NULL;
+       ut_params->cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
+
+       /* Setup HMAC Parameters */
+       ut_params->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+       ut_params->auth_xform.next = NULL;
+
+       ut_params->auth_xform.auth.algo = RTE_CRYPTO_AUTH_NULL;
+       ut_params->auth_xform.auth.op = RTE_CRYPTO_AUTH_OP_GENERATE;
+
+       /* Create Crypto session*/
+       ut_params->sess = rte_cryptodev_sym_session_create(
+                       ts_params->valid_devs[0], &ut_params->cipher_xform);
+       TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+
+       TEST_ASSERT_EQUAL(rte_crypto_op_bulk_alloc(ts_params->op_mpool,
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC, burst, burst_len),
+                       burst_len, "failed to generate burst of crypto ops");
+
+       /* Generate an operation for each mbuf in burst */
+       for (i = 0; i < burst_len; i++) {
+               struct rte_mbuf *m = rte_pktmbuf_alloc(ts_params->mbuf_pool);
+
+               TEST_ASSERT_NOT_NULL(m, "Failed to allocate mbuf");
+
+               unsigned *data = (unsigned *)rte_pktmbuf_append(m,
+                               sizeof(unsigned));
+               *data = i;
+
+               rte_crypto_op_attach_sym_session(burst[i], ut_params->sess);
+
+               burst[i]->sym->m_src = m;
+       }
+
+       /* Process crypto operation */
+       TEST_ASSERT_EQUAL(rte_cryptodev_enqueue_burst(ts_params->valid_devs[0],
+                       0, burst, burst_len),
+                       burst_len,
+                       "Error enqueuing burst");
+
+       TEST_ASSERT_EQUAL(rte_cryptodev_dequeue_burst(ts_params->valid_devs[0],
+                       0, burst_dequeued, burst_len),
+                       burst_len,
+                       "Error dequeuing burst");
+
+
+       for (i = 0; i < burst_len; i++) {
+               TEST_ASSERT_EQUAL(
+                       *rte_pktmbuf_mtod(burst[i]->sym->m_src, uint32_t *),
+                       *rte_pktmbuf_mtod(burst_dequeued[i]->sym->m_src,
+                                       uint32_t *),
+                       "data not as expected");
+
+               rte_pktmbuf_free(burst[i]->sym->m_src);
+               rte_crypto_op_free(burst[i]);
+       }
+
+       return TEST_SUCCESS;
+}
+
+
+
+
+static struct unit_test_suite cryptodev_qat_testsuite  = {
+       .suite_name = "Crypto QAT Unit Test Suite",
+       .setup = testsuite_setup,
+       .teardown = testsuite_teardown,
+       .unit_test_cases = {
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                               test_device_configure_invalid_dev_id),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                               test_device_configure_invalid_queue_pair_ids),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                               test_queue_pair_descriptor_setup),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                               test_multi_session),
+
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                               test_AES_CBC_HMAC_SHA1_encrypt_digest_oop),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                               test_AES_CBC_HMAC_SHA1_decrypt_digest_oop_ver),
+
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                               test_AES_CBC_HMAC_SHA1_encrypt_digest),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                               test_AES_CBC_HMAC_SHA1_decrypt_digest_verify),
+
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                               test_AES_CBC_HMAC_SHA256_encrypt_digest),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                               test_AES_CBC_HMAC_SHA256_decrypt_digest_verify),
+
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                               test_AES_CBC_HMAC_SHA512_encrypt_digest),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                               test_AES_CBC_HMAC_SHA512_decrypt_digest_verify),
+
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                               test_AES_CBC_HMAC_AES_XCBC_encrypt_digest),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                               test_AES_CBC_HMAC_AES_XCBC_decrypt_digest_verify),
+               TEST_CASE_ST(ut_setup, ut_teardown, test_stats),
+
+               /** AES GCM Authenticated Encryption */
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_encryption_test_case_1),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_encryption_test_case_2),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_encryption_test_case_3),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_encryption_test_case_4),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_encryption_test_case_5),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_encryption_test_case_6),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_encryption_test_case_7),
+
+               /** AES GCM Authenticated Decryption */
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_decryption_test_case_1),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_decryption_test_case_2),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_decryption_test_case_3),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_decryption_test_case_4),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_decryption_test_case_5),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_decryption_test_case_6),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_decryption_test_case_7),
+
+               /** Snow3G encrypt only (UEA2) */
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_encryption_test_case_1),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_encryption_test_case_2),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_encryption_test_case_3),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_encryption_test_case_4),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_encryption_test_case_5),
+
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_encryption_test_case_1_oop),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_decryption_test_case_1_oop),
+
+               /** Snow3G decrypt only (UEA2) */
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_decryption_test_case_1),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_decryption_test_case_2),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_decryption_test_case_3),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_decryption_test_case_4),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_decryption_test_case_5),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_hash_generate_test_case_1),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_hash_generate_test_case_2),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_hash_generate_test_case_3),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_hash_verify_test_case_1),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_hash_verify_test_case_2),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_hash_verify_test_case_3),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_authenticated_encryption_test_case_1),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_encrypted_authentication_test_case_1),
+               TEST_CASES_END() /**< NULL terminate unit test array */
+       }
+};
+
+static struct unit_test_suite cryptodev_aesni_mb_testsuite  = {
+       .suite_name = "Crypto Device AESNI MB Unit Test Suite",
+       .setup = testsuite_setup,
+       .teardown = testsuite_teardown,
+       .unit_test_cases = {
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_AES_CBC_HMAC_SHA1_encrypt_digest),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_AES_CBC_HMAC_SHA1_decrypt_digest_verify),
+
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_AES_CBC_HMAC_SHA256_encrypt_digest),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_AES_CBC_HMAC_SHA256_decrypt_digest_verify),
+
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_AES_CBC_HMAC_SHA512_encrypt_digest),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_AES_CBC_HMAC_SHA512_decrypt_digest_verify),
+
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_AES_CBC_HMAC_AES_XCBC_encrypt_digest),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_AES_CBC_HMAC_AES_XCBC_decrypt_digest_verify),
+
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_AES_CBC_HMAC_SHA1_encrypt_digest_sessionless),
+
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_not_in_place_crypto),
+
+               TEST_CASES_END() /**< NULL terminate unit test array */
+       }
+};
+
+static struct unit_test_suite cryptodev_aesni_gcm_testsuite  = {
+       .suite_name = "Crypto Device AESNI GCM Unit Test Suite",
+       .setup = testsuite_setup,
+       .teardown = testsuite_teardown,
+       .unit_test_cases = {
+               /** AES GCM Authenticated Encryption */
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_encryption_test_case_1),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_encryption_test_case_2),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_encryption_test_case_3),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_encryption_test_case_4),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_encryption_test_case_5),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_encryption_test_case_6),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_encryption_test_case_7),
+
+               /** AES GCM Authenticated Decryption */
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_decryption_test_case_1),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_decryption_test_case_2),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_decryption_test_case_3),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_decryption_test_case_4),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_decryption_test_case_5),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_decryption_test_case_6),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_mb_AES_GCM_authenticated_decryption_test_case_7),
+
+               TEST_CASES_END() /**< NULL terminate unit test array */
+       }
+};
+
+static struct unit_test_suite cryptodev_sw_snow3g_testsuite  = {
+       .suite_name = "Crypto Device SW Snow3G Unit Test Suite",
+       .setup = testsuite_setup,
+       .teardown = testsuite_teardown,
+       .unit_test_cases = {
+               /** Snow3G encrypt only (UEA2) */
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_encryption_test_case_1),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_encryption_test_case_2),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_encryption_test_case_3),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_encryption_test_case_4),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_encryption_test_case_5),
+
+
+               /** Snow3G decrypt only (UEA2) */
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_decryption_test_case_1),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_decryption_test_case_2),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_decryption_test_case_3),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_decryption_test_case_4),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_decryption_test_case_5),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_hash_generate_test_case_1),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_hash_generate_test_case_2),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_hash_generate_test_case_3),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_hash_verify_test_case_1),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_hash_verify_test_case_2),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_hash_verify_test_case_3),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_authenticated_encryption_test_case_1),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_snow3g_encrypted_authentication_test_case_1),
+
+               TEST_CASES_END() /**< NULL terminate unit test array */
+       }
+};
+
+static struct unit_test_suite cryptodev_null_testsuite  = {
+       .suite_name = "Crypto Device NULL Unit Test Suite",
+       .setup = testsuite_setup,
+       .teardown = testsuite_teardown,
+       .unit_test_cases = {
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_null_auth_only_operation),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_null_cipher_only_operation),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_null_cipher_auth_operation),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_null_auth_cipher_operation),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_null_invalid_operation),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                       test_null_burst_operation),
+
+               TEST_CASES_END() /**< NULL terminate unit test array */
+       }
+};
+
+static int
+test_cryptodev_qat(void /*argv __rte_unused, int argc __rte_unused*/)
+{
+       gbl_cryptodev_type = RTE_CRYPTODEV_QAT_SYM_PMD;
+       return unit_test_suite_runner(&cryptodev_qat_testsuite);
+}
+static struct test_command cryptodev_qat_cmd = {
+       .command = "cryptodev_qat_autotest",
+       .callback = test_cryptodev_qat,
+};
+
+static int
+test_cryptodev_aesni_mb(void /*argv __rte_unused, int argc __rte_unused*/)
+{
+       gbl_cryptodev_type = RTE_CRYPTODEV_AESNI_MB_PMD;
+
+       return unit_test_suite_runner(&cryptodev_aesni_mb_testsuite);
+}
+
+static struct test_command cryptodev_aesni_mb_cmd = {
+       .command = "cryptodev_aesni_mb_autotest",
+       .callback = test_cryptodev_aesni_mb,
+};
+
+static int
+test_cryptodev_aesni_gcm(void)
+{
+       gbl_cryptodev_type = RTE_CRYPTODEV_AESNI_GCM_PMD;
+
+       return unit_test_suite_runner(&cryptodev_aesni_gcm_testsuite);
+}
+
+static struct test_command cryptodev_aesni_gcm_cmd = {
+       .command = "cryptodev_aesni_gcm_autotest",
+       .callback = test_cryptodev_aesni_gcm,
+};
+
+static int
+test_cryptodev_null(void)
+{
+       gbl_cryptodev_type = RTE_CRYPTODEV_NULL_PMD;
+
+       return unit_test_suite_runner(&cryptodev_null_testsuite);
+}
+
+static struct test_command cryptodev_null_cmd = {
+       .command = "cryptodev_null_autotest",
+       .callback = test_cryptodev_null,
+};
+
+static int
+test_cryptodev_sw_snow3g(void /*argv __rte_unused, int argc __rte_unused*/)
+{
+       gbl_cryptodev_type = RTE_CRYPTODEV_SNOW3G_PMD;
+
+       return unit_test_suite_runner(&cryptodev_sw_snow3g_testsuite);
+}
+
+static struct test_command cryptodev_sw_snow3g_cmd = {
+       .command = "cryptodev_sw_snow3g_autotest",
+       .callback = test_cryptodev_sw_snow3g,
+};
+
+REGISTER_TEST_COMMAND(cryptodev_qat_cmd);
+REGISTER_TEST_COMMAND(cryptodev_aesni_mb_cmd);
+REGISTER_TEST_COMMAND(cryptodev_aesni_gcm_cmd);
+REGISTER_TEST_COMMAND(cryptodev_null_cmd);
+REGISTER_TEST_COMMAND(cryptodev_sw_snow3g_cmd);